Error Result Code -48? Help...won't record!

I use G-band for basic VO recording in my home studio into my Powerbook. I run a simple stereo line-in and record to a completely basic stereo track. Nothing fancy. This has worked flawlessly for months.
Just now, in mid-session, I click on the red Record button and I get this message: Error Result Code -48. It doesn't begin to record at all. The message is immediate, and it won't record.
This program is pretty vital to my business. Can anyone help me figure this out?? I have restarted the program, shutdown and restarted the Powerbook. No luck.
Any help?!
ge

You could try some web searches. I just know some of them because I've run into them while programming, and have some notes scattered about here and there for some of the less common ones, but not all of them.

Similar Messages

I/O Error: Result Code=-36 HELP!!!

Anyone got any idea what this is about? The problem in a nutshell is as follows...
I'm running Logic 7.2.3 on a G5 (PowerPC version) with a dedicated, built in 250gig HD for audio. Over the last week I've suddenly become aware that everything I thought was being saved to this HD is impossible to access anymore and I get the above error code coming up each time.
However, anything recorded to this HD prior to the last week still opens fine with no issues at all.
Tell me I'm being stupid and have done something ridiculous, please!!! There's a whole lot of work down the drain if that's not the case.
Any help you can offer would be greatly appreciated.
Thanks.

I have never experienced that error, but I Googled "I/O Error: Result Code=-36" and found this...
It really has nothing to do with Logic. It is a Mac OSX error being passed on
by Logic. It has to do with not being able to write to the drive. You can
get this error in Logic if your recording drive is too full, is too
fragmented, or the directory is messed up.
Some things you can do to solve the problem are: Make sure you are recording
to a drive other then the system drive, make sure you have plenty of free
space on the recording drive, repair permissions, defrag the recording
drive, or run a disk utility like Disk Warrior to check and repair directory
issues.
Hans
here is the link to that ...
http://logic-users.org/forums/LUG/thread/81375

Error -- Result Code -54 HELP PLEASE!!!!!!

I've been recording 10-20 minute stories on my macbook for a while now (I'm an elementary school teacher) and today I recorded a 45 min interview. I opened the new track and picked the real audio option and saved it to the desktop. I began to record it and checked in the middle and it was fine. When I finished, though, I tried to turn the recording off and it said "An Error Occurred. Result Code = -54". I don't know what to do! Did it "auto-save"? I'm a new mac user so I don't know much about macs. I'm scared to shut my computer off in case I lose all that information but now its been sitting with the colorful rolling ball for about 10 minutes.

"An Error Occurred. Result Code = -54"
a -54 is a permissions error. this could mean that your account doesn't have permission to read or write to a directory, or perhaps the "permissions" are set wrong. Try repairing Permissions:
http://www.bulletsandbones.com/GB/Tutorials.html#repairingpermissions
rolling ball for about 10 minutes.
unfortunately that sounds like, for whatever reason, GB has locked up (permissions repair can often solve this problem as well)
Did it "auto-save"?
there is no "auto save", however, if the data was written to disc, it may be salvageable. you may as well force quit GB:
http://www.bulletsandbones.com/GB/GBFAQ.html#forcequit
because the data is either there or it isn't, waiting will not change that.
after you've quit GB, post back with the file size of the project

I/O error result code= -36 ???? Please help!!

Im running studio with apogee duet, just got the apple care (god bless it) superdrive replacement, now I get audio input output functioning realtime, but *** soon as I attempt to record the error pops up. I cant find anyone else with this problem, and apogee unfortunately was clueless. I find it strange that an I/O error is occurring when I pass audio in/out no problem. It blasts the error as soon as I press that quick key R.
I'm running ProTools8 in the meantime on a MBox and it feels so inadequate/fake/unprofessional/. Show me why it was a good thing apple bought out E-Magic fellas!!!
P.S. where do you guy get the definitions of these codes?

I have never experienced that error, but I Googled "I/O Error: Result Code=-36" and found this...
It really has nothing to do with Logic. It is a Mac OSX error being passed on
by Logic. It has to do with not being able to write to the drive. You can
get this error in Logic if your recording drive is too full, is too
fragmented, or the directory is messed up.
Some things you can do to solve the problem are: Make sure you are recording
to a drive other then the system drive, make sure you have plenty of free
space on the recording drive, repair permissions, defrag the recording
drive, or run a disk utility like Disk Warrior to check and repair directory
issues.
Hans
here is the link to that ...
http://logic-users.org/forums/LUG/thread/81375

"Error Result code = -43" AND "Audio file not found"

In Garageband I was trying to click Join, but kept getting "Error Result code = -43"
What does this mean?
Also, I thought saving the file and restarting Garageband would help, but upon re-opening the program BIG problem: the file (just this one, others are opening fine) has this error message upon opening "Audio file “07 I See the Light.aif” not found!"

mcgregorsgal wrote:
so do I have to basically start over?
for that one recording, it looks like it.
the error -43 is a system level error, so i HIGHLY doubt this will help, however you can ctrl-click the project file, choose Show Package Contents, open the media folder and preview any audio files in there to see if the missing file is there, but in all likelihood, you will need to re-record it

I/O Error result code -36: Logic bug, or Mac OSX bug?

Hello-
I encountered a problem in Logic Pro 8 today that severely damaged one of my audio files in my session. I was working in the sample editor, and I went to copy and paste an audio fragment. When I tried to paste the audio, this error came up:
"I/O Error, result code = -36"
After that, the cursor turned into a black and white spinner, and the audio file that I was working with suddenly was altered in a way that somehow erased a portion of it in the song. I had to ability to undo, view the changes in the audio file, etc, etc. It was damaged irreversibly, and I had to end up re-recording that segment. Does anyone know why this happens, and is it a bug in Logic?
BTW, I have over 500 gigs free on the external drive that I am recording to, and nothing has changed, hardware-wise on my system in over 6 months... Any help would be greatly appreciated.

Adam Nitti wrote:
Hello-
I encountered a problem in Logic Pro 8 today that severely damaged one of my audio files in my session. I was working in the sample editor, and I went to copy and paste an audio fragment. When I tried to paste the audio, this error came up:
"I/O Error, result code = -36"
After that, the cursor turned into a black and white spinner, and the audio file that I was working with suddenly was altered in a way that somehow erased a portion of it in the song. I had to ability to undo, view the changes in the audio file, etc, etc. It was damaged irreversibly, and I had to end up re-recording that segment. Does anyone know why this happens, and is it a bug in Logic?
BTW, I have over 500 gigs free on the external drive that I am recording to, and nothing has changed, hardware-wise on my system in over 6 months... Any help would be greatly appreciated.
This sounds like one of two things that I have seen with this error :
1.- your external hard drives' connection to the computer is not 100% stable (loose cable...dusty environment...)
2.- Your audio device, is ti FireWire too? Is it daisy chained to this external hard drive? Maybe the order of the daisy chaining needs to be looked at.
Cheers

I/O Error Result Code -36

I'm trying to record a new track in an existing project, and every time a hit the record button I get an I/O Error Result Code -36. This is only happening in this particular project. If I open a new project I can record just fine. What does this mean? Any help would be greatly appreciated!

wmclow wrote:
I'm trying to record a new track in an existing project, and every time a hit the record button I get an I/O Error Result Code -36. This is only happening in this particular project. If I open a new project I can record just fine. What does this mean? Any help would be greatly appreciated!
And what audio interface and hard drive are you using?
Details... it's all in the details...

Can't burn dvd's!!! error result code -8796 is freaking me out.

i've been trying to burn a Quicktime .mov file to dvd-r. i have a mac 10.5.8. I was able to do this before I got the internet with idvd3 or toast 7, now that I have the internet neither toast nor idvd work. After the project is done encoding, I keep receiving the message "cannnot record disc because of mac os error result code -8796". anyone have a similar problem or a guess as to what might be going on? thanks.

Hi, depends on wheter it was really -8796 or -8976, easy to transpose, but the 1st is a Font error, the second which makes much more sense is a Quicktime error, & my guess on that would be some Disk or Cache corruption.
are you saying I should open Font Book, validate the fonts and look for duplicates? I've never messed with the fonts, never (knowingly) installed any 3rd party fonts..
It won't hurt anything to do it, & some apps like MS & Adobe apps will install some fonts that may not be great for Macs.
i'm a newbie and don't really understand why fonts would affect dvd burning but i'm willing to try anything (within reason) cheers...
Hey, don't worry about that, I'm not a n00b & I couldn't understand it either... though I do have a knack for being able to conceive the impossible as probable, & sorta warp my brain into a feasible scenario... LOL on me!
I really think OCG fell upon, (well OK, used logic), to come up with perhaps the real source of the problem & maybe the real error code!?
At this point I think you should get Applejack...
http://www.versiontracker.com/dyn/moreinfo/macosx/19596
http://www.macupdate.com/info.php/id/15667
After installing, Reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 6 of it's things.
The 6 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
Delete old Log files.
At least if it doesn't fix it, it'll eliminate a few questions.
Feel free to holler if that presents any questions.

Mac OS Error Result Code 1634955892

The subject error message is what I got when I tried to copy a DVD that would not play all the way using Toast, to se if I could recover. It says after exttracting the DVD and putting in the media that it cannot record because of a Mac OS error result code 1634955892. What the !!!???>> does this mean?

I found this reference to that error code, but it seems complicated to me: http://support.apple.com/kb/TA26910?viewlocale=en_US
So, I did more searching and found this:
http://newsgroups.derkeiler.com/Archive/Uk/uk.comp.sys.mac/2006-07/msg00364.html which is a sort-of explanation with no fix.
And this: http://www.tivoblog.com/archives/2007/11/18/roxio-releases-updated-version-of-to ast-popcorn-now-supports-tivo-92-leopard/
which seems to imply that Toast/Popcorn need to be updated for DVD copying.
Apparently this error code comes up when there are compatibility issues.
Have you tried extracting the DVD data using other software such as Handbrake, Ripit or MPEG Streamclip?

Mac OS Error Result Code 12082

Can anyone at all shed some light on this? Recently have been getting an error message when burning DVDs that says "Could not record the disk because of a Mac OS Error: Result Code 12082". OS is 10.3.9, error occurs on a 20" G5 iMac.
After searching through all the error code listings I can find none that have any info on that one, so would like to throw it out there for assistance.
Thanks
20" G5 iMac Mac OS X (10.3.9)

Hello Precise,
I found this on Roxio's support:
Mac Os X Error 18775
sorry if that is not related to your problem,
littleshoulders

Mac OS error Result Code = 1852402768

I have been using Handbrake to covert video files into apple TV format for a number of years & then every now & again burning the file to DVD which has worked fine.
I don't know if this is just a coincidence but I downloaded a Handbrake update last night & then tried burning the newly converted files and using Toast Titanium but i received the following error "Mac OS error' Result Code = 1852402768"
I've searched the forums and many suggest that the files could be too large for the DVD but there is a display on Toast that shows the size of the files & I can usually get 3 half hour episodes on no problem with free space remaining but to test this theory I dropped in just one file of less than a GB and the same error came up.
I did however try burning some older files pre the handbrake update & they have worked fine.
I don't know if I have to change any setting but currently I'm stuck, Any help out there??
Many thanks
JPGUK

You might try looking/posting here.
Handbrake Support

I try to drag certain loops but when i drop them in i get the error:   Result code = -5000     File = GarageBand-Temp-B262E454.tmp

I try to drag certain loops but when i drop them in i get the error:
     Result code = -5000
     File = GarageBand-Temp-B262E454.tmp

Hi,
   I've been trying to solve this problem for a school my companey has set up. After some research and looking at a number of similar posts I tracked the problem down to loops that came with jam packs or with apps like soundtrack pro. These loops are located in /Library/audio/appleloops. If you give everyone read and write access to this folder and it items the loops seem to work.
I also noticed that once the loops were working agin GB had to convert the sample rate so it's possible that it's the sample rate on certain loops that causess the issue or prehaps the need to change the rate.
Hope this helps.
Matt Fleming
(ACSA)

Toasts burn error result code =-5001

At the very end of my burn of a DL DVD Verbatim 2x speed with Toast I get this error code "Couldn't complete the last command because of Mac OS Error Result code =- 5001"
Then it asked me to select the region of the DVD. I put it in my computer and a DVD player and it seems to play fine. Any idea on why I get this error?

Take a look here, it worked for me
http://discussions.apple.com/thread.jspa?messageID=3236567&#3236567
Also try to save as a disk image first then write that out, another thing that works when I start getting bad burns

Today I stupidly tried to install CUDA accelerator forgetting I have Intel/AMD combo graphics card and not NVidia. Now when I try to launch AE or PremierePro I get this Last log message was: 140735120521568 GPUManager 2 Sniffer Result Code: 3 Help

Today I stupidly tried to install CUDA accelerator forgetting I have Intel/AMD combo graphics card and not NVidia. Now when I try to launch AE or PremierePro I get this Last log message was: <140735120521568> <GPUManager> <2> Sniffer Result Code: 3. I have trashed the CUDA program and reinstalled Premiere and AE but no joy. Same message followed by another error box with options to Retry, Send to Apple or ignore. I have tried all 3 options but nothing works! Every time I launch either program same message appears.

Hi? today i too have this problem.
I found a solution here: https://discussions.apple.com/message/25137524#25137524
Now all good.
Good luck!

Error result code -39 EXS 24

Hi,
I've made a custom EXS 24 sampler instrument in Logic Pro. Now I'd like to use the same instrument in the EXS 24 sampler loaded in Mainstage, but upon loading I get the error with result code -39. Next the plug-in is loaded, but I am unable to play the instrument (i.e. no sound playes). Does anyone knows a way to fix this problem?
Many thanks in advance,
Giel

http://forums.support.roxio.com/lofiversion/index.php/t18523.html

Error Result Code -48? Help...won't record!

Similar Messages

Maybe you are looking for