KKRV- Urgent please ,Data collection for product drill down

Hi
I was trying to run the report for variances but no data is pulling, says no summarization, i checked the KKR0 for summariazation, what settings do we need to do activate or work the reports?
Thanks,
Nivi
Message was edited by:
Nivi ram

Hi Subbu
You are on a wrong path
The settings you did in OKN0 + KKRV - Relate to KKO0 reports (Not KKBC_HOE)
For KKBC_HOE - You need to configure summarization Hier in KKR0
br, Ajay M

Similar Messages

KKRV-Data collection for product drilldown

Dear all,
In KKRV data is not collected.
I have maintained product group=material group in OKN0
Cost component structure OP
Please suggest whether any other activities to be done for data to be collected.
In transaction KKBC_HOE. I am getting a msg Enter Hierarchy ID. How to visualize this report. pls suggest.
Regards
Subbu.
Edited by: Subbu SP on May 5, 2011 3:47 AM

Hi Subbu
You are on a wrong path
The settings you did in OKN0 + KKRV - Relate to KKO0 reports (Not KKBC_HOE)
For KKBC_HOE - You need to configure summarization Hier in KKR0
br, Ajay M

Firefox users cannot presently exercise choice, to opt-in or out of "data collected for improving services." As a result, Firefox is constantly dialing home, sometimes four times a day or more up to 48 times a day. There is some over-stepping and redunda

I understand the charter on this is to "check-in" once every time the program is turned on, and then once every 6 hours after that, or, once every 24 hours presumably. But the phone-home-effect is over-stepping these basic parameters. If a user turns their browser off and then on, Firefox is still obligated to "check-in" even if it just checked in 3 minutes prior. If the coding is not pre-designed to overstep, or act excessively in a redundant focus, the instance of once every six hours or once every 24 hours, is still overmuch if a user has been doing this (non-voluntarily-participating) for 9 months or longer.
== This happened ==
Every time Firefox opened
== This started when Firefox took up the initiative of "improving service. to end users" or similar idea, making the web safer for novice users, etcetera.

Opening question was truncated. Should read: "Firefox users cannot presently exercise choice, to opt-in or out of "data collected for improving services." As a result, Firefox is constantly dialing home, sometimes four times a day or more up to 48 times a day. There is some over-stepping and redundancy here. It would seem the practice of "improving service" has been accomplished with as much information as Mozilla has gathered in the last 6-18 months about its users habits. '''Isnt it about time to give users the option to opt out of that now that most the heavy liftiing has been accomplished?'''"

Report Painter - cannot hide an element selected for the drill-down report

Dear Experts
I am using report painter to modify a report by trying to hide a row but getting the following error.
You cannot hide an element that you selected for the drill-down list
Message no. K7186
Diagnosis
You cannot hide elements that have already been selected for the drill-d
System Response
The function was canceled.
Procedure
Deselect the relevant row or column from the drill-down list.
It says to deselect the relevant row from the drill-down list, but not able to find out how do i do it.
kindly please help me to solve it
thanks in advance
Suresh

Hi,
If you are asking me whether i am trying to hide the row in the report painter form or in the output of the report, then, yes i am trying it in the report painter.
I copied this standard form '0SAPRATIO-01' for Cash Flow statements-Indirect method(tcode FSI5) and trying to modify the copied one. I tried to hide an existing row but it gave me the above message.
any help?
Suresh
Edited by: rasuresh on Aug 10, 2010 12:44 PM

Product Drill Down Reporting and Using KKC7/KKC8 & KKRV

Hello Guys,
Need some expert advise on my issue.
1. I have created a product group using T-code KKC7 and assigned materials to my product group.
2. I have done some material movement posting using 261 on these materials.
3. Next I run KKRV to collect data
4. Next I run Report S_ALR_87013139
I expect to see drill down report by product group but I dont see anything?
Is there something else which needs to be set?
In spro I have checked reporting control parameters and its all good.
Please share your thoughts.
Regards,
Sanjeev

Dear Sanjeev,
Did you get an error or information message when you execute S_ALR_87013139?
Best regards,
Jason

Problem setting up data collection for a performance problem

We have a performance problem on our production environment: there is a query that is long to display specially on specific records involving a lot of détails. I had the idea to set up data collection to investigate the problem.
I used the wizard to set up data collection with default settings.
I had created a database PERF_DW on our test server for that purpose.
I didn't have any problem with the wizard: it created data collection sets and SQL Server agents tasks and probably many objects. But I don't know where I missed something but I didnt, have the chance to specify the database I wanted to tune
and even when I started data collection, I couldn't figure out where were the reports.
Then I tought that I did it all wrong so I stopped data collection and dropped the database and tried to deleted the jobs created and I had the following message:
TITRE : Microsoft SQL Server Management Studio
Échec de Supprimer pour Travail « collection_set_1_noncached_collect_and_upload ». (Microsoft.SqlServer.Smo)
Pour obtenir de l'aide, cliquez sur :
http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=11.0.2100.60+((SQL11_RTM).120210-1917+)&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Supprimer+Job&LinkId=20476
INFORMATIONS SUPPLÉMENTAIRES :
Une exception s'est produite lors de l'exécution d'une instruction ou d'un lot Transact-SQL. (Microsoft.SqlServer.ConnectionInfo)
The DELETE statement conflicted with the REFERENCE constraint "FK_syscollector_collection_sets_collection_sysjobs". The conflict occurred in database "msdb", table "dbo.syscollector_collection_sets_internal", column 'collection_job_id'.
The statement has been terminated. (Microsoft SQL Server, Erreur : 547)
Pour obtenir de l'aide, cliquez sur :
http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&ProdVer=11.00.3128&EvtSrc=MSSQLServer&EvtID=547&LinkId=20476
BOUTONS :
OK
Now I understand that the collectors prevent the jobs from being deleted but I can't delete the collectors.
What should I do?
Any help is appreciated.
Thank you for your advice.
Sylvie P

Hello,
Please refer to the following article.
http://blogs.msdn.com/b/sqlagent/archive/2011/07/22/remove-associated-data-collector-jobs.aspx
You can run the dcclenaup.sql script mentioned in the article.
Another option is using sp_syscollector_cleanup_collector.
http://blogs.msdn.com/b/sqlagent/archive/2012/04/05/remove-associated-data-collector-jobs-in-sql-2012.aspx
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Problem setting data collection for SLD

Good day
I have the following situation.
A Solution Manager 71 installation, just recently patched to SP11. Previously I had the SLD on this system. And then a colleague informed that this could be a problem in the future as my ECC systems are Basis 731 which is higher level than the 702 on the Solution Manager system. So I installed a separate Java stack system on the same server as the Solution Manager.
The problem that I am faced with now is that I cant get the data collection (RZ70) to connect with the new Java system that I have installed. When I go into SLD and Administration, I see under Details>Data Suppliers that the server is specified as the Gateway Host, with a Gateway port of 3303. On the Solution Manager system it specified the gateway host as "localhost" and the gateway port as sapgw00.
So, from RZ70 I specify the gateway service as sapgw03 and then I get the result:
0: DSIMSID001_SID_00
: Collection of SLD data finished
0: DSIMSID001_SID_00
: Data collected successfully
0: DSIMSID001_SID_00
: RFC data prepared
0: DSIMSID001_SID_00
: Used RFC destination: SLD_NUC
0: DSIMSID001_SID_00
: RFC call failed: Error when opening an RFC connection (CPIC-CALL: 'ThSAPOCMINIT' : cmRc=17 thRc=2
0: DSIMSID001_SID_00
: Batch job not scheduled
And from the SLD_NUC entry in SM59 I get
Logon    Connection Error
Error Details    Error when opening an RFC connection (CPIC-CALL: 'ThSAPOCMINIT' : cmRc=17 thRc=2
Error Details    ERROR: SAP gateway communication error (Is SAP gateway closed?)
Error Details    LOCATION: SAP-Server DSIMSID001_SID_00 on host DSIMSID001 (wp 1)
Error Details    COMPONENT: CPIC
Error Details    COUNTER: 47
Error Details    MODULE:
Error Details    LINE:
Error Details    RETURN CODE: 239
Error Details    SUBRC: 0
Error Details    RELEASE: 721
Error Details    TIME: Mon Mar 16 14:04:05 2015
Error Details    VERSION:
Can anyone give me a few ideas what may be wrong here please?
Regards
Ray Phillips

Hi Ray,
Please check if the below SLD configuration is done.You can use any one of the two below link depending on how you want to configure your SLD.
Configure SLD for JCo and Creation of JCo Destinations - Portal - SCN Wiki
or
How to Create & Configure Local SLD on SAP NetWeaver 7.3 AS Java after Installation
If your SLD server is not a local SLD then make sure that in both the SLD system and the remote system host fine entry is there in /etc/hosts and etc/services.

How to do filter data after Data Collection for Oracle PS

Hi Experts,
I have a critical issue on the "Data Volume" after data collection program.
If I give this big chunk of data as a input to PS, then integration program is not taking this High volume of data into PS.
Hence now I have a critical task to reduce number of Data.
In this front, first I need to delete some items which are not required for PS in the base table(In MSC_SYSTEM_ITEMS) after collection program, but I do not know the dependent entities which also has to be taken care in MSC side after collection, If I delete the itrems from MSC_SYSTEM_ITEMS..
Hence I require help on this data filter issue.
Appreciating anyone's help in advance...
Thanks & Regards,
Bharathram N

Hello,
Have you looked at the request Purge ODS Data of Collections? Using this you can delete all the collected data for a specific instance id.
Once that is done you can run a complete refresh for all entities for all enabled organizations. This will ensure that old data pertaining to disabled orgs is removed.
Additionally in 11.5.10 (collections rup 32 and later) there is a feature implemented which does not pull data from disabled organizations into the source snapshots. This in itself does not make a difference for the ODS data, but does give better performance in the refresh snapshots.
One thing to take into account if your purge the ODS data that in the event when you still have ascp plans that are based on this data, then you may end up with no data being displayed in the workbench (because the lid tables have been purged). Here you would have to rerun the plans.
best regards
Geert

Assistance with Data Merge for product sell sheets

Last year I started creating product sell sheets for our sales team. The sell sheet is built containg these elements: A product photo, a data table displaying product numbers, descriptions etc.. Underneath the photo and table is a text box. I have created a lot of these sell sheets for a variety of product categories. The prices are updated fairly often, maybe once every month or two. I created all of these using excel and Illustrator. Other than photoshop, Adobe products were forign to me and never looked into what indesign was capable of until now.
I am wondering if the data merge feature would be a good fit for what I am doing. I would be more than happy to share my project files. I am asking for a little bit of hand holding here to expedite this process. Anyone out there willing to take a look and help me out??
Project Files:
PDF Sell Sheet created in Illustrator (would like to have the same look and feel but have the data automated in Indesign)
Excel Data (Looking to reformat the way the data is displayed so that it would work well with Data Merge)

I don' think data merge will lend itself well to that sort of layout. It's just not sophisticated enough. For datamerge, all the data for each module has to be in one row on your excel sheet. Example: The setup on top will yield the example below. The image has a placeholder in the far left.
For your example, I think your best bet is to set up table styles. (table styles won't hold column widths, but there is a script that you can use for that: it's referenced in this thread. If you make good use of paragraph styles and table styles, it will still go much more quickly in InDesign.
http://forums.adobe.com/message/4929669

Bex report issue - no applicable data found when we drill down on free char

Hi All,
We are facing some strange issue with one of the report.
when user run the report for a week (02/02/2009 - 02/08/2009) and then drill down on particular char its working fine (first time).after that when he is trying to change and execute the report for other week on the same instence ( 02/09/2008 - 02/15/2009) by clicking on refresh and passing new values to the variable its showing up correctly at the time of drill down on free char its showing as *no applicable data found.*
when he logoff the system completey and run the report for the week( 02/09/2008 - 02/15/2009) values it is showing up with values even tough he drill down on free char.
issue basically when he was trying to drill on free char by chaging different date values in the same instance by clicking on refreh and by entering diffrent values its showing up as not applicable data found.
but when he enters the values for different weeks each time by closing the system and relogin report is working fine and showing up data eventough he drill down on free char.
Please help me out!

Dear
Please check if any condition or exception you have created for that query.
Or still problem exists check SP level.
Regds,
Sachin J

Taking long time to get the data while trying to drill down the freechar's

hi experts,
i have a query on 0sd_c03, in this query PLANT and SALES ORG. are in free characteristics, whenever i am trying to drill down the plant or sales organization it is taking lot of time to retrieve the data.
what is the problem,
give me suggestions to solve this problem.
thanks in advance,
venkat

From RSA1 double click on the infoobjects. Goto Business Explorer tab
For the option Query Execution Filter Val. Selection select Only posted values for navigation
Try whether thsi setting solves your problem

Workaround for PDF drill down not opening in new window

Has anyone found a way of getting a drill down PDF which doesn't
replace the original report in the window?
TIA
Paul Williams

Four years later...
Is there a way to do this yet?
So far I have had to create the report as DESTYPE=HTML in order to give the user a 'drilldown' with the option of using the back button on the browser and also 'Open in a new window'. When using PDF the 'back' button does not work and 'Open in a new Window' does not seem to be an option.
OAS 10g, Reports 10g, Acrobat 6
Bob

Data collection for cost object hierarchy - no data at order level!

Hi everyone,
When using transaction KKP6 to see my hierarchy for cost object, the system displays all the values that are allocated on my hierarchy nodes, but I do not have the values that should come from the production orders (repetitive manufacturing with production version).
I use transaction KKRZ to collect data for cost object hierarchy, but it seems that the system does not retrieve any information from the orders.
Would someone know about this point customizing steps to follow to retrieve my orders values?
Thanks in advance for your answer. Rewards guaranteed!
Ronan

Hi Amadeus,
To do so, I have used transaction OKZ5 in the customizing and ticked "always cost object hierarchy" and "distribution".
By doing so, you enable the system to distribute costs within a cost hierarchy. Otherwise the system will only determine costs on the hierarchy.
Try this, it may work for you as well. During your period-end closing, you sould now use "cost object hierarchy" instead of product cost collector.
Regards,
Ronan

Oracle enterprise data quality for product(PDQ)

Hi,
i am looking for tutorial or training material for oracle pdq(product data quality).
can anybody please suggest where can i find good material or hands on tutorials?
Thank you
Raghu.Vujjini

You should find all you need in the Getting Started guide in the online help.
I recommend using the introductory wizard when first launching Director- this will take you through creating a project, connecting to some data, and creating a profiling process.

Urgent: please help me for BADI in CRM

Hi,
Could you please find me the Order check BADI in CRM .
Answered will be rewarded .
Requirement:- The average weight can be derived from the total weight during order entry by dividing the total weight by number of items. As is done in posting cheque entry.
Thanks In Advance
-Regards.

Hi Maddela,
u can find BAdIs in different ways...
1>First go to any transaction->iN THE menu bar SYSTEM->STATUS->Get the program name ->double click->u will go to the program attached to the tcode.Now search term will be CALL CL_EXITHANDLER.Now u will get list of BADI'S available..
2>Goto SE24->Give class name as CL_EXITHANDLER->Display->double click on get_instance mathod->Now u will go inside the method->Now put break point on the cl_exithandler.Now go to any transaction code and pass dat..U will see that it will be stopped on the break point which u set on the cl_exithandler...In the exit name u can find list of badi's attached to the tcode..
There are multiple ways of searching for BADI.
Finding BADI Using CL_EXITHANDLER=>GET_INSTANCE
Finding BADI Using SQL Trace (TCODE-ST05).
Finding BADI Using Repository Information System (TCODE- SE84).
1. Go to the Transaction, for which we want to find the BADI, take the example of Transaction VD02. Click on System->Status. Double click on the program name. Once inside the program search for CL_EXITHANDLER=>GET_INSTANCE.
Make sure the radio button In main program is checked. A list of all the programs with call to the BADIs will be listed.
The export parameter EXIT_NAME for the method GET_INSTANCE of class CL_EXITHANDLER will have the user exit assigned to it. The changing parameter INSTANCE will have the interface assigned to it. Double click on the method to enter the source code.Definition of Instance would give you the Interface name.
2. Start transaction ST05 (Performance Analysis).
Set flag field "Buffer trace"
Remark: We need to trace also the buffer calls, because BADI database tables are buffered. (Especially view V_EXT_IMP and V_EXT_ACT)
Push the button "Activate Trace". Start transaction VA02 in a new GUI session. Go back to the Performance trace session.
Push the button "Deactivate Trace".
Push the button "Display Trace".
The popup screen "Set Restrictions for Displaying Trace" appears.
Now, filter the trace on Objects:
V_EXT_IMP
V_EXT_ACT
Push button "Multiple selections" button behind field Objects
Fill: V_EXT_IMP and V_EXT_ACT
All the interface class names of view V_EXT_IMP start with IF_EX_. This is the standard SAP prefix for BADI class interfaces. The BADI name is after the IF_EX_.
So the BADI name of IF_EX_CUSTOMER_ADD_DATA is CUSTOMER_ADD_DATA
3. Go to Maintain Transaction (TCODE- SE93).
Enter the Transaction VD02 for which you want to find BADI.
Click on the Display push buttons.
Get the Package Name. (Package VS in this case)
Go to TCode: SE84->Enhancements->Business Add-inns->Definition
Enter the Package Name and Execute.
Here you get a list of all the Enhancement BADIs for the given package MB.
The simplese way for finding BADI is
1. chooes Tcode Program & package for that Tcode.
2. Go to Tcode se18
3. Press F4
4. search by package or by program.
Regards,
Ashish

KKRV- Urgent please ,Data collection for product drill down

Similar Messages

Maybe you are looking for