ERROR: RFx Time always Changing after save edit

Hi Expert,
I'am using SRM 7 and ECC 6, and use extended classic scenario.
When I try to check the time after edit RFx (Submission Deadline,
Opening Date and Technical RFx Response Opening Date), its always change it self and different with our edit before.
I don't know why it washappen.
Need your response...
Thanks and Regards,

Check if you have active implementation of BBP_DOC_CHANGE_BADI which changes the time fields for your RFx (check BBP_PD_BID method).
If there is no time specific logic in your BADI implementation mentioned above, you might need to apply some notes:
Note 1469471 - Submission deadline of RFx gets changed with Timezones (this one is for SRM 701, but I believe it also applies to SRM 7 release. You could create an OSS to SAP for them to extend the validity for this note.)
Note 1559880 - The RFx "End Date" is not displayed in the bidder time zone
Note 1573014 - Submission Deadline timezone of RFX converted to UTC
Note 1548529 - End date gets changed when follow on document is changed
Edited by: Jay Yang on Mar 31, 2011 6:42 AM

Similar Messages

I have adobe CS 5.1 and recently (after an update) it is giving me an error (Could not save...because of a program error) every time I try to save my work as a PDF Help how can I get this resolved??

I have adobe CS 5.1 and recently (after an update) it is giving me an error (Could not save...because of a program error) every time I try to save my work as a PDF> Help how can I get this resolved??

Run the cleaner, reinstall.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
And don't bother with running any updates unless you really need them or they fix a critical issue relevant to your workflow.
Mylenium

How do I stop my original photo from changing after I edit then save it in Raw 7

How do I stop my original image from changing after I save the edited version in Camera Raw 7. I want to be able to keep the original intact and
also have the edited version. Also, if I want to work the new edited version in the future I would want to also keep that old version.
Thanks for your help

Thanks for this great solution NoelHave a great day and weekend
Re: How do I stop my original photo from changing after I edit then save it in Raw 7created by Noel Carboni in Photoshop General Discussion - View the full discussion Another way to revert all the saved metadata changes back to defaults is to select the Camera Raw Defaults entry in the Camera Raw fly-out menu... http://forums.adobe.com/servlet/JiveServlet/downloadImage/2-6070597-543394/362-482/RevertS ettings.png -Noel

When creating a new window in safari, using command T, the marker have not activated the search field. It means you have to click there every time. Changed after upgrading to Mavericks. Anyone knows how to change this?

When creating a new window in safari, using command T, the marker have not activated the search field. It means you have to click there every time. Changed after upgrading to Mavericks. Anyone knows how to change this?

Yes, you can do something like that. What you would do is create a button for each image and then hide them. When I do this type of thing I place all of the buttons on a template page and then hide the template.
You can then use JavaScript to copy the icon from any of the hidden buttons to the main button that you've set up to display the image. For example, suppose you set up 10 buttons named b1, b2, b3, ...b10. The code to copy the icon from one of them to the button used to display the image (b0) would be something like this:
// Get the icon from the b3 button
var oIcon = getField("b3").buttonGetIcon();
// Get reference to the b0 button
var f = getField("b0");
// Set the icon of the b0 button to the icon retrieved from the hidden button
f.buttonSetIcon(oIcon);
// Show the b0 button
f.display = display.visible;
This code would go in the Mouse Up event of the smaller button.

Time EXIF change after edit

I'm with PSE 10 on MacBook pro. My probleme is each time I edit a picture in the Element editor (RAW or JPEG) the time picture was originaly taken in EXIF is changed. In the organizer it then appers an (1) hour earlier than the file opened in the editor. It's very frustating since all photos appears in wrong order in organizer. Can someone help ?

I recently switched from iPhoto to Organiser because of the annoyance factor of iPhoto creating vast numbers of thumbnails of 'faces', only to encounter the problem of unwanted Time adjustment! Perhaps I will revert to iPhoto if it doesn't get fixed soon!
I need to keep photos in the same order for viewing as JPEG CDs. Some DVD players sort and display as Slideshows by File number sequence, others by Date/Time sequence. So I try to adjust both types of data to maintain correct order.
Camera and Mac time settings do NOT result in unwanted time adjustment on import or edit.
I now have to manually re-adjust each photo's Date/time setting in Organiser after import and each editing session.
I carried out the following test using PSE 10:
Created JPEG file: in Preview>Tools>Inspector, EXIF time is 12:36 (correct).
Opened Organizer, and imported the photo.
In Organizer, time appears set back to 11:36.
In Preview, EXIF time remains at 12:36
In Organizer, selected photo, then >Fix >Full Edit.
In Organiser, time sets back further to 10:36 and in Preview, file's EXIF time sets back to 11:36.
Importing a photo into Organiser sets photo time back by one hour in Organiser!
Opening a photo file from Organiser, for Edit in the Editor, sets photo time back by one hour in Organiser, and sets back the file's EXIF time by one hour!
UPDATE:
I have now found that Organiser only resets Time in certain batches of photos.
Examing File Info in PSE Editor, Advanced, EXIF Properties, it appears that Organiser sets Time back where Exif Date Time ends with +01:00, but NOT where it ends with Z.
Both batches of files have Meta Data Date ending with +01:00.
Message was edited by: grandadpete3

[SOLVED] Time is changed after every reboot

Hello,
my Arch has strange behaviour regarding the system time. I use latest up-to-date arch with KDE. No explicite NTPD running and I don't have it in DAEMONS under rc.conf. The KDE own time & date environment is configured to not automatically change time. In /etc/rc.conf I have HARDWARECLOCK="localtime" and TIMEZONE="America/Chicago". Now from the environment to the problem:
Whenever I shutdown or restart my system, the time will be changed after booting into linux again. After shutdown with correct time using "date -s ..", the BIOS clock is correct. Then, when it actually boots into arch, there will be a delay
of 20-40 seconds for "$ date" (approximatelly the time of the reboot process) and also in the BIOS clock!
After shuting down before going to bed and restarting in the morning, the time will be approximately (or more or less exactly) the time when I shutted down... It should not be related to KDE as I observe the same behaviour when I remove kdm from daemons in rc.conf, hence, booting to console, setting time, restarting into console...
As I have dual boot: this problem is not observable using windows...
It seems like the time is stored somewhere during shutdown process and changed accordingly during reboot...?!?
Any ideas or comments? It's really crazy how annoying a wrong computer clock becomes (all IMs and system stuff is based on it...). :-(
Last edited by ichbinder (2010-10-10 09:11:01)

Thanks for all the quick responses!
Primoz wrote:maybe you should start using ntp or openntpd?
It provides you with time directly from the net.
Well, I tried to use ntp. As I am using KDE, there should already be a synchronisation service active. I can activate synchronisation in System Settings -> Date & Time and it works right after activation. But further on, e.g. after a restart - and hence such a wrong time as described in my first post - it does not correct anything. So it seems like, there is also a problem with this KDE synchronisation. But to state why I'm not using it anymore: it doesn't make much sense to use it as this is just a work around and does not solve the problem that the hardware clock might become wrong (so, e.g. I end up with a wrong clock in windows or so). In general, I just want to have a correct clock without synchronisation before I activate synchronisation.
ewaller wrote:
That seems weird.
When you power up, what happens if, before starting your boot loader, you enter the BIOS set up and check the system time?
Yes, it is. Well, if the hardware clock has been set correctly using e.g. hwclock it will be correct in BIOS before I restart arch. Similar observations for the following case:
- set HW clock correct in BIOS
- start arch ... shutdown arch
- check HW clock in BIOS -> correct
- start arch ... shutdown arch
- check HW clcok in BIOS -> incorrect
ewaller wrote:...
Other thoughts: date -s does not set the BIOS clock, it sets the Linux kernel time. On what do you assert that the BIOS clock is correct at shutdown.
Thanks for the hint! In that case, it seems like the KDE Date & Time settings influence both, hwclock and date.
ewaller wrote:...
Also, once booted into Linux, what does the command hwclock show? This command reads the actual BIOS hardware clock.
Yeah, I used that alot now. So as described, it is also incorrect after a restart. But only after arch has booted again. To sum it up:
Using whatever tools to set the hardware clock and the system clock (KDE's tool, hwclock + date, or BIOS + date), both are correct until I reboot into arch the next time. If I do that, it resets both to a time similar to the last shutdown time.
karol wrote:
This doesn't fix anything, but you can try https://bugs.archlinux.org/task/13684#comment52246 - using UTC instead of localtime.
I never checked if my system clock is running perfect at all times or is /etc/cron.hourly/adjtime correcting it once in a while.
Hm, not to sure what they are doing exactly there and how this might help... :-/
What do you mean with the second part of the sentence? Not sure if /etc/chron.hourly/adjtime is doing anything in my case... How can I check if that cronjob is running?
karol wrote:Have you tried this http://wiki.archlinux.org/index.php/Time#Time_Skew ?
But this is very interesting! I will remove /var/lib/hwclock/adjtime as described in the wiki and see what happens then. Thanks!

CONTACT NAMES NOT DISPLAYING & TIME FORMAT CHANGING AFTER SYNC

i live in kuwait and i was just gifted an officially unlocked 3g iphone from new zealand. i upgraded to 2.1. i have 2 problems
1. i have synced my contacts from address book. the format that it is stored in is +965XXXXXX. 965 is the country code for kuwait and all numbers in kuwait are of 7 digits. there is no area code as this is a small country. when someone calls me their name does not appear. only the number appears
2. i have set the time format on the iphone to the 24 hour format but every time i sync with my macbook the time format changes to 12 hour format.

Follow this procedure to get your contacts back (I assume they are on your Mac/PC):
1. Go to Settings, then Mail, Contacts, Calendars
2. Select your account which has the contacts you wish to sync
3. Turn syncing for Contacts to "Off". This will bring up a box telling you your iPhone is turning off Contacts. My iPhone actually hung at this stage, so after several minutes, I performed a hard restart (holding down Home and power buttons for 5 sec.)
4. Exit from Settings
5. Go to Settings, then Mail, Contacts, Calendars
6. Select your account which has the contacts you wish to sync
7. Turn syncing for Contacts to "On". This should restore your contacts
8. Go to Contacts to verify. They initially may not appear or just show up as numbers for a second or two, but then your contacts should appear.

Folder View Always Changing After Shutdown

After every shutdown or sometimes randomly, the view of my folders in my harddrive always changes. It goes from the non-toolbar view to the brushed metal toolbar view. All the folders get messed up and its really annoying once you use to them being in the correct place. I ran NAV to find a virus and found nothing. Any ideas why this is happening? Any help... well, helps. Thanks.

I am the only user on my computer.
Read this. Logging in as another User will help isolate the problem.
http://macosg.com/group/viewtopic.php?t=6750
-Bmer
Mac Owners Support Group
Join Us @ MacOSG.com
 An Apple User Group 
New: MacOSG Podcast
Disclaimer required by Apple Discussions Terms of Use: MacOSG - a non-profit Apple User Group - may receive some form of compensation, financial or otherwise, from my recommendation or link.

Error in table maintenance event after save

Hi,
I would like to issue an error in table maintenace event without exiting the screen.
When I am going to save in table maintenace then i am getting error but at the same time it is exiting table maintenace screen. I want to stay on the same screen but only want to give error message. Please can you help me in this ?
Below is the code I have written in event:
    DATA lwa_row TYPE ztemp.
LOOP AT total.
    clear lwa_row.
    if <vim_total_struc> is ASSIGNED.
      MOVE-CORRESPONDING <vim_total_struc> to lwa_row.
    endif.
    if <action> NE 'D' and <action> is NOT INITIAL and <action> NE 'X'.
      if lwa_row-hkont = ''.
        MESSAGE 'Please enter GL?' TYPE 'E'.
        vim_abort_saving = 'X'.
      ELSEIF lwa_row-ind = ''.
        MESSAGE 'Please enter indicator?' TYPE 'E'.
        vim_abort_saving = 'X'.
      endif.
    endif.
ENDLOOP.
Many Thanks.

Hi,
What`s event you are using, '01' ?
And change your code to this: 'MESSAGE 'Please enter indicator?' TYPE 'S' DISPLAY LIKE 'E'.'?
regards,
Archer

Record Working Time time data missing after save

Dear All,
I have some problem with my ESS record working time iview (CATW). All this while it was working fine until today, after I click on check entries and the save the time data, there is a message showing that the timesheet had been successfully submitted but the time data is missing form the field.
Normally after I click on check entries and save, I can still see the time data there even I logout and login again. But now after I click save, the data is not there anymore.
Any idea what wrong with it?
Regards,
Bryan

well the times will surely be saved! Please verify
this is just information
If you want to prevent this message to be issued, you
may consider a modification in the relevant function module
HR_BALANCE_TIMES_AGAINST_DWS:
Ganztägige Sätze
   IF BEGUZ_EXP    <> SPACE06       AND
      STDAZ_EXP    >= DAYGEN-SOLLZ AND "<    change in ">"
      DAYGEN-SOLLZ <> 0.
     IF INFOTYPE = '2001'.              "ABW umfaßt Sollarbeitszeit
       IF 1 = 2. MESSAGE I848(P2). ENDIF.
       CALL FUNCTION 'HR_APPEND_ERROR_LIST'
            EXPORTING
                 ARBGB = 'P2'
                 MSGTY = 'I'
                 MSGNO = 848.
       BEGUZ_EXP = SPACE06.
       ENDUZ_EXP = SPACE06.
       STDAZ_EXP = DAYGEN-SOLLZ.      MESSAGE_OCCURED = 'X'.
    ENDIF.
ENDIF."
I think this should be callend via ESS as well

Error while trying to change or save as query in query designer

Hi ,
When we are trying to change or do a save as to a query in the query designer,it is giving us an error stating"'An unexpected object variable or with block variable not set'error occured in wdbrlog 1 error(s) are logged".
We have searched in SDN for the same error and found some OSS notes(Notes 571831,575434) should be implemnted but those notes seem old.We are using BI 7.0 version.
Could anyone please suggest??
Thanks,
Bhagyarekha.

What is your front end SP level ?

Window size always changes after restart in 10.9.2. How can I fix it- as in older OS-Versions?

Hi,
I'm using OSX for a long time. Now I bought a new MBA 10' with Mavericks 10.9.2. I'm really tired about ever changing window sizes after restarting my MBA, espacialy the sidebar is skipping to a wider size, then the window, I used before turning the mac of. No window opens, in exact that size I used before. Of course, I used to fix it, but never menaged to do so.
Have you any idea to solve my problem?

Do you uncheck the "Reopen windows when logging back in?" box? If so, does the issue occur when you leave the box checked?
That might be the culprit.
I hope I solved your question.
Austin

Time format change after update to 4.0.7577.250 on aastra 6725ip

Hi,
i make an device update on my aastra 6725ip to version 4.0.7577.250.
After that update the time format is changed. I found in the changelog that this should be fixed?!
What todo?
regards,
Frank

Whats the format changed to?
Can you use settings to change the format? Or do factory reset on phone (hold 4 and 6 while booting).
Andrew Morpeth
Lync Server Specialist - Auckland, NZ
Check out my blog

Error-1 time machine backups after lion upgrade

I upgraded to Lion on both my computers. My iMac Time Machine Backups are fine - it's connected by firewire to an external hard drive.
BUT my Macbook Tim Machine Backups are wireless using our Time Capsule and the backups are stored on the Time Capsule.
Since upgrading, The backups fail & I get this error: The backup disk image “/Volumes/Brunnertime/LittleOne (2).sparsebundle” could not be accessed (error -1).
Just like so many other unhappy Lion users.
One positive abberation - Last night, I went into Time Machine Preferences, re-selected the appropriate backup disk (our Time Capsule), entered the password, started a backup and VOILA it backed up fine. All night long, it did hourly backups.
This morning? Once again, the backups are FAILING with that same error - The backup disk image “/Volumes/Brunnertime/LittleOne (2).sparsebundle” could not be accessed (error -1).
Plus, now there are NO backups on the disk. Huh?
At this point we are disgusted that both Lion and iCloud (that's another longer story) were released before they should have been. Too many bugs.

Hey, finally I found a permanent fix for this issue. I read about it at another Apple Discussions Forum, but right now I don't remember where.
It worked for me at least. In my case it seems that some Western Digital (WD) software was causing the issue. I just uninstalled WDSmartWare from my iMac using that application's own uninstaller, rebooted my Mac and, finally, after months of calling Apple Support with no luck, it all started to work normally again, so check if you have some WD software running on your Mac. In my case I didn't even need that WD software, as I had it because I used to back up to a WD Drive which I don't use anymore since I bought my Time Capsule.
Feel free to reply if you require any further assistance.
Good Luck.

Text Caption Timing Options Changing after an Edit

I am trying to highlight a matrix in four seperate slides. I
made my text caption box and highlight box on one slide and copied
and pasted for the next three. When I went in to edit the text in
the 3 copied captions, the timing options changed on me. For
example, on one I set the timing to 10 seconds and when I tested I
realized it was showing for only about 3. I have no idea why this
changed. I found an old post from someone and the suggestion was to
uncheck some "calculate timing" box. I am using Captivate 3 and
have found no such box to uncheck. Any help would be wonderful!
Thanks,
Kim

Hi Kim and welcome to our community
Click the Project menu and see if you have a check mark
beside the option "Calculate Caption Timing". I'm guessing you do.
DE-select it and the timing should be left alone.
Cheers... Rick

ERROR: RFx Time always Changing after save edit

Similar Messages

Maybe you are looking for