Error running "crsctl query css votedisk"

Hi all,
I get "Parse error: 'css' is an invalid argument" when I'm trying to run "crsctl query css votedisk"
Any ideas?
Thanks,
Igor.

its only available from My oracle support site.
access only available if you have CSI no,you will get once you purchased the support/product from oracle.
https://support.oracle.com/CSP/ui/flash.html
https://support.oracle.com/CSP/ui/faq_en.html#registration

Similar Messages

Error running a query

Hi,
When i try to run a query i get to a point it asks me to input the values.
Once i do that i get an error ther is an UNCAUGHT_EXCEPTION in class
SAPMSSY1 method.
As a result the system has been disconnected from BI server.
I went through Note 931975 which is not the cause.
Please guide.

The system is is a BI 7.0 and BW SP is 17
When i input the values for the query after running RRMX i get a message "warning time of calculation "Before Agregation"is obsolete.
Then i get a message "Abort system error in program CL_RSR_GRID and form Fill_AXIX_SETXX_LINE:TXT_N_M
Then it says disconnecting from BW server and the excel sheet closes.

Error running a query and creating a query report.

Hi all
I have a problem with a query when I'm running it or trying to create a report for it.
23/09/2009 11:47:31: 1). [Microsoft][SQL Native Client][SQL Server]Arithmetic overflow error converting expression to data type datetime.
'Document' (RDOC) -- Run query
23/09/2009 11:01:58: 1). [Microsoft][SQL Native Client][SQL Server]Invalid object name 'CSHS.T0'.
2). [Microsoft][SQL Native Client][SQL Server]Statement 'Received Alerts' (OAIB) (s) could not be prepared. - create a query report
This happened on a Windows Server 2003 OS , when I ran the same query on local pc on xp it ran fine on both scenarios.
Please help
Bongani Dlamini

select SlpName, ItmsGrpNam, sum(LineTotal) as 'Total Sales Minus Returns'
from
SELECT T4.SlpName, T3.ItmsGrpNam, T0.LineTotal FROM dbo.INV1 T0 INNER JOIN dbo.OINV T1 ON T0.DocEntry = T1.DocEntry INNER JOIN OITM T2 ON T0.ItemCode = T2.ItemCode INNER JOIN OITB T3 ON T2.ItmsGrpCod = T3.ItmsGrpCod INNER JOIN OSLP T4 ON T0.SlpCode = T4.SlpCode WHERE T1.DocDate >=[%0] and T1.DoCdate<=[%1]
UNION
SELECT T4.SlpName, T3.ItmsGrpNam, (T0.LineTotal * -1) AS 'LineTotal'
FROM dbo.RIN1 T0 INNER JOIN dbo.ORIN T1 ON T0.DocEntry = T1.DocEntry INNER JOIN OITM T2 ON T0.ItemCode = T2.ItemCode INNER JOIN OITB T3 ON T2.ItmsGrpCod = T3.ItmsGrpCod INNER JOIN OSLP T4 ON T0.SlpCode = T4.SlpCode WHERE T1.DocDate >=[%0] and T1.DoCdate<=[%1 ]
) InvoicesMinusReturnsDerivedTable
group by slpname, ItmsGrpNam

Error while running a query-Input for variable 'Posting Period is invalid

Hi All,
NOTE: This error is only cropping up when I input 12 in the posting period variable selection. If I put in any other value from 1-11 I am not getting any errors. Any ideas why this might be happening?
I am getting the following error when I try and run a query - "Input for variable 'Posting Period (Single entry, mandatory)' is invalid" - On further clicking on this error the message displayed is as follows -
Diagnosis
Variable Posting Period (Single Value Entry, Mandatory) is used as a lower limit (X) and an upper limit () in an interval selection. This limit has the value #.
System Response
Procedure
Enter a different value for variable Posting Period (Single Value Entry, Mandatory). If the value of the other limit is determined by another variable, you can change its value also.
Procedure for System Administration

OK.
Well, if the variable is not used in any interval selection, then I would say "something happened to it".
I would make a copy of the query and run it to check if I get the same problem with period 12.
   -> If not, something is wrong in the original query (you can proceed as below, if changes to original are permitted).
If so, then try removing the variable completely from the query and hardcode restriction to 12.
   -> If problem still persists, I would have to do some thinking.
If problem is gone, then add the variable again. Check.
   -> If problem is back, then the variable "is sick". Only quick thing to do, is to build an identical variable and use that one.
If problem also happens with the new variable, then it's time to share this experience with someone else and consider raising an OSS.
Good luck!
Jacob
P.S: what fisc year variant are you using?
Edited by: Jacob Jansen on Jan 25, 2010 8:36 PM

'ORA-01722: Invalid Number' error while Running a Query

Hi,
I'm trying to run a query built on a DSO. The DSO has a field 'Start Date'. This Start Date InfoObject has a reference Char as 0DATE.
This Start Field has blank values due to which I'm getting the ORA-01722 error. I came across many threads with same topic of discussion. As mentioned in one of the Threads I have written a program to update 'Start Date' with 00000000. The code wriiten is "UPDATE /BIC/AZ_MONINV00 SET /BIC/ZSTR_DTE = '00000000' where /BIC/ZSTR_DTE = ' '.
Now when I see the data in the active data table of DSO the blank value is replaced with '00000000'.
But If I right click on the DSO click on display data the 'Start Date' field is blank. And now the Query also gets executed without any error. But in the output of the query the 'Start Date' Field has "#" values.
Can anyone suggest on how can I make these "#" values appear as 00000000 in the report?

In this case, you have to write a macro to avoid # in Analyzer.
Right Click-->Display Data will show data from Active table of DSO only.
If you don't want to show any blank date values in the report, you can exclude in Filter in Query.

Error while running a Query on webi

Hi Folks
I just installed a BOBJ edge standard 3.1 and trying to configure and test it the very first time, I have following issues if you can advise the solution., I would really appreciate.
1. when i try to create a test query on Webi Rich Client and and run query, I get the follow messge:
A databse error occured. The database error text is : [Microsoft] [ODBC Microsoft access driver] could not use (unknown);
file already in use (WIS 10901)
2. The other issue I have is that when i create a test query on the webi (infoview side) and try to run the query I dont see any result like column, rown or fields, all I see is a solid yellow block which I believe is because of kmissing Java connector. can you guys pls let me know if this is the reason I dont see the report or Is there any other reason for that.
I would appreciate your help on this.
Regards

Hello,
What type of database did you build your universe on? Access? SQL Server? or other? You would need to go into the universe you are trying to use for the report go into File, Parameters, and see what your connection is, and while you're there, click "test" to be sure it is working. If not, that is your problem. If it is, but the report still is not working, either way, you will need to go into Control Panel, Administrative Tools, Data Sources (ODBC) and set up a system DSN that links to the correct database. Again test it to be sure it works. Then make sure the universe has a connection that uses this same DSN. The report should run.
Hope that helps.

Running a query in a View Designer results in an error, but running the same query in a Query window works

Hi everyone,
Just as my title says, I have a query which I've written in a query window and it works perfectly.
But when I try to add the query code into the view designer, it throws a Syntax error.
Error in ON clause near '('.Unable to parse query text.
Also, when running the query from the view designer (pressing red exclamation mark) I get a different error.
SQL Execution Error.Executed SQL statement: SELECT Sku, ParentSku, UPC, ...Error Source: .Net SqlClient Data ProviderError Message: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
Has anyone else experienced this and is there any workaround?
I have tried to create the view with T-SQL (CREATE VIEW etc.), but when opening it in the view designer I get the error from the 1st image.
Thank you,
Radu

Hi Radu,
Yes, I have faced similar issue. I had a View and it was working totally fine but when once I opened it in via right click - View Design, it was giving parse error.
Cause is that Query designer parse and executes the query without error but the way View designer works, it can't parse it.
Later I ignored View desinger and just used T-SQL like CREATE/ALTER view.
Workaround is to do right click on View - Script View as - CREATE To/ ATER To.
Regarding Timeout error, again the issue with View designer which couldn't execute query in there and ended up with timeout error.
If your SELECT query and SELECT * FROM YourView works fine in Query designer, you are good to go.
Similar threads:
View with errors still saved, and still works...
Parsing error when creating view
-Vaibhav Chaudhari

Database Error while running the query.

Hi,
While running the query in webi rich client i am having a "database error IES 10901 and WIS 10901" , it is showing that the data source name not found and default driver is not specified.
I am trying to generate report from efashion universe which is in .unx format, same client version and universe is running fine on another machine (webi rich client).
PS: The above mentioned universe is running fine on my BI launch pad, the problem is with webi rich client only.
Please help!!

Hi,
Which Database your are using .
As explained by Yuvraj You need to install driver for specific database .
Ask for client or (your Database ) driver from administrator .
After installation you can see your database Driver in following path
Control Panel\System and Security\Administrative Tools\Data Sources (ODBC)
See in Drivers Tab .
If you are using oracle & client is install on your system then Check TNS Names File in NETWORK folder .

Error message while running a query

Hello experts,
While running a query I am getting an error message as :
Abort error 'connection closed (no data) in RSRDC_CUBE_DATA_GET_RFC could not
Abort system error in program SAPLRRK0 and form RSRDR; SRRK0F30-01-
please advice what are these errors, cause and resolution for these errors.
Thanks,
Anamika

Hi Anamika,
If you are running your query in Web Portal, it seems your web portal is not defined in RFC connection with system. Ask BASIS to connect it.
Also, You can run your report in RSRT with ABAP Web option and check if it is working on ABAP engine.
Regards,
Harpal
Edited by: Harpalsinh Gohil on Aug 17, 2009 2:53 PM

Index does not exist error while running the query

Hi Everone,
I am facing some problem when i try to tun the query in BEx. When i run the query, it is giving the error "Index does not exist". Please help me out.
With Regards
Pavan
Edited by: PavanRaj_S on Mar 3, 2010 4:50 AM

Hi,
If you facing index problem go to mange create the index and you want to know what are all the infocubes not maintained index go db02 you can find out.
Regards
sivaraju

Getting Error while running this query

Hi,
SELECT SUM(BATCHWISE_COUNT) TOTALBATCHCOUNT,
     TO_CHAR(SUM(BATCHWISEAMOUNT),'9,99,99,99,99,99,99,99,990.99') TOTALAMOUNT ,
     SUM(SLIP_RECORDS) TOTALSLIPCOUNT,
     SUM(CHEQUEONLY_RECORD) TOTALCHEQUECOUNT
from (SELECT COUNT(TI.FLDITEMINITIALID) BATCHWISE_COUNT from TBLITEMINITIAL TI),
(select SUM(IT.FLDAMOUNT)/100 BATCHWISEAMOUNT from TBLITEMINFOTRANS IT ),
(SELECT COUNT(FLDITEMINITIALID) FROM TBLITEMINITIAL TI WHERE FLDBATCHNUMBER NOT IN (select FLDBATCHNUMBER from TBLITEMINITIAL_DEL where TI.FLDCAPTURINGDATE=FLDCAPTURINGDATE) AND TI.FLDITEMTYPE = 'P' AND TI.FLDCAPTURINGMODE = 'CP') SLIP_RECORDS,
(SELECT COUNT(FLDITEMINITIALID) FROM TBLITEMINITIAL TI WHERE FLDBATCHNUMBER NOT IN (select FLDBATCHNUMBER from TBLITEMINITIAL_DEL where TI.FLDCAPTURINGDATE=FLDCAPTURINGDATE) AND FLDITEMTYPE = 'C' AND FLDCAPTURINGMODE = 'CO') CHEQUEONLY_RECORD
from TBLITEMINITIAL TI,
               TBLITEMINFO II,
               TBLITEMINFOTRANS IT
          WHERE     II.FLDITEMINITIALID                    = TI.FLDITEMINITIALID
          AND     II.FLDITEMID                         = IT.FLDITEMID
          GROUP BY TRUNC(TI.FLDCAPTURINGDATE),TI.FLDBATCHNUMBER,TI.FLDCAPTURINGBRANCH,TI.FLDSCANNERID)
Im geeting error
ORA-00933: SQL command not properly ended
when running this query
I don't know what mistake i have done in this query , Kindly help for solving this issue
Thanks
Bala,
Edited by: 965937 on Feb 11, 2013 9:25 PM

Dear Friend
Try with the query below,
<<
SELECT SUM(BATCHWISE_COUNT) TOTALBATCHCOUNT,
TO_CHAR(SUM(BATCHWISEAMOUNT),'9,99,99,99,99,99,99,99,990.99') TOTALAMOUNT ,
SUM(SLIP_RECORDS) TOTALSLIPCOUNT,
SUM(CHEQUEONLY_RECORD) TOTALCHEQUECOUNT
from (SELECT COUNT(TI.FLDITEMINITIALID) BATCHWISE_COUNT from TBLITEMINITIAL TI),
(select SUM(IT.FLDAMOUNT)/100 BATCHWISEAMOUNT from TBLITEMINFOTRANS IT ),
(SELECT COUNT(FLDITEMINITIALID) FROM TBLITEMINITIAL TI WHERE FLDBATCHNUMBER NOT IN (select FLDBATCHNUMBER from TBLITEMINITIAL_DEL where TI.FLDCAPTURINGDATE=FLDCAPTURINGDATE) AND TI.FLDITEMTYPE = 'P' AND TI.FLDCAPTURINGMODE = 'CP') SLIP_RECORDS,
(SELECT COUNT(FLDITEMINITIALID) FROM TBLITEMINITIAL TI WHERE FLDBATCHNUMBER NOT IN (select FLDBATCHNUMBER from TBLITEMINITIAL_DEL where TI.FLDCAPTURINGDATE=FLDCAPTURINGDATE) AND FLDITEMTYPE = 'C' AND FLDCAPTURINGMODE = 'CO') CHEQUEONLY_RECORD
from TBLITEMINITIAL TI,
TBLITEMINFO II,
TBLITEMINFOTRANS IT
WHERE II.FLDITEMINITIALID = TI.FLDITEMINITIALID
AND II.FLDITEMID = IT.FLDITEMID
GROUP BY TRUNC(TI.FLDCAPTURINGDATE),TI.FLDBATCHNUMBER,TI.FLDCAPTURINGBRANCH,TI.FLDSCANNERID;
Regards
Ahamed Rafeeque Cherkala
Edited by: Ahamed Rafeeque on Feb 12, 2013 3:20 AM

No Data Shown because an error occurred while running the query

Discoverer 10gR2 using Plus on Firefox:
I have one workbook. The first sheet summarizes by Vendor. Parameters are Type, Category, Vendor (all optional) and mandatory date range.
The second sheet summarized by Vendor and Model. Parameters are Type, Category, Vendor, Model (all optional) and mandatory date range.
All parameters except the extra "Model" are shared between the sheets.
When I run the Vendor sheet, parameters pop up, I put in dates and leave the rest blank. Results display. Yeah!
When I then run the Model sheet, parameters pop up again (because it has one more parameter). Dates carry forward, leave the rest blank. I get the error No Data Shown because an error occurred while running the query. Refreshing does not help.
If I click back to the Vendor sheet, then come back to the Model sheet, no parameter screen and the query runs.
Booooo.
Have tried multiple DBs, multiple EULs, multiple underlying data sources, replacing the offending parameter with a whole new one, no difference.
Has any body run into this behavior? Is there an answer?
-- Ron Olcott, Business Intelligence Product Manager

What about trying this. On the parameter definition, you have a section on the bottom left of the Parameters window, called "Do you want to allow different parameter values for each worksheet?". When you say in your posting that all but the Model parameter is shared, I assume you mean that you have set this section value to "Allow only one set of paratmeter values for all worksheets". Try setting this to "Allow different parameter values for each worksheet". See if that might make a difference for you. If that works, you may have to leave the option at this, as the lesser of your evils. From my limited experience, the "Allow only one set of parameter mvalues for all worksheets" is a bit flaky in how it works. So I pretty much have gone to always saying to allow different parameter values for each worksheet. Hope this helps a bit. If worse comes to worse, if you have not done so already, log a service request with support and see what they say. Good luck.
John DIckey

"SYSTEM_FAILURE" error message when running BEX query

Hello,
I often encounter this error when I run BEX queries (take note that I encounter this error after I have already entered the query values). But when I run the same query in a later time, the query becomes successful, which makes the problem intermittent. I only encounter this when running BEX but I don't encounter such error when I'm running the query in RSRT and displaying it in SAP instead of in Excel. I hope you have any idea about this. Thank you.

Hi Lee,
Check transaction ST22 or SM21 after you get that message.
Hope this helps.
regards,
Diego

Error in sql query as "loop has run more times than expected (Loop Counter went negative)"

Hello,
When I run the query as below
DECLARE @LoopCount int
SET @LoopCount = (SELECT Count(*) FROM KC_PaymentTransactionIDConversion with (nolock) Where KC_Transaction_ID is NULL and TransactionYear is NOT NULL)
WHILE (
   SELECT Count(*)
   FROM KC_PaymentTransactionIDConversion with (nolock)
   Where KC_Transaction_ID is NULL
   and TransactionYear is NOT NULL
) > 0
BEGIN
   IF @LoopCount < 0
       RAISERROR ('Issue with data in KC_PaymentTransactionIDConversion, loop has run more times than expected (Loop Counter went negative).', -- Message text.
               16, -- Severity.
               1 -- State.
SET @LoopCount = @LoopCount - 1
end
I am getting error as "loop has run more times than expected (Loop Counter went negative)"
Could any one help on this issue ASAP.
Thanks ,
Vinay

Hi Vinay,
According to your code above, the error message make sense. Because once the value returned by “SELECT Count(*) FROM KC_PaymentTransactionIDConversion with (nolock) Where KC_Transaction_ID is NULL and TransactionYear is NOT NULL” is bigger than 0,
then decrease @LoopCount. Without changing the table data, the returned value always bigger than 0, always decrease @LoopCount until it's negative and raise the error.
To fix this issue with the current information, we should make the following modification:
Change the code
WHILE (
SELECT Count(*)
FROM KC_PaymentTransactionIDConversion with (nolock)
Where KC_Transaction_ID is NULL
and TransactionYear is NOT NULL
) > 0
To
WHILE @LoopCount > 0
Besides, since the current query is senseless, please modify the query based on your requirement.
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Hi when i run this query its showing an error ORA_22905 cannot access rows

hi when i run this query its showing an error ORA_22905 cannot access rows from an non nested table item can anyone help me out
SELECT
DISTINCT SERVICE_TBL.SERVICE_ID , SERVICE_TBL.CON_TYPE, SERVICE_TBL.S_DESC || '(' || SERVICE_TBL.CON_TYPE || ')' AS SERVICE_DESC ,SERVICE_TBL.CON_STAT
FROM
TABLE(:B1 )SERVICE_TBL
WHERE
CON_NUM = :B2
thanks & regards

Note the name of this forum is SQL Developer *(Not for general SQL/PLSQL questions)* (so for issues with the SQL Developer tool). Please post these questions under the dedicated SQL And PL/SQL forum.
Regards,
K.

Error running "crsctl query css votedisk"

Similar Messages

Maybe you are looking for