Error running web service enabled from ApplicationModule Service Interface

Hi,
I have created a web service from from ApplicationModule Service Interface and exposed a view instance update operation. When I run the service (right click on serviceimpl and run), I am getting the following error
<BEA-101371> Error: There was a failure when processing annotations for application context. Please make sure that the annotations are valid. The error is message
Description     There was a failure when processing annotations for application context. Please make sure that the annotations are valid. The error is message
Cause     The descriptor has an invalid servlet-class, filter-class or listener-class
Action     Fix the descriptors in application or the library.
I have looked at web.xml, weblogic.xml, but couldn't figure out the issue.
Our packaging structuring is some like this.
Model -> Contains EO's, associations
UIModel -> Contains AM, VO's Webservices
UI -> Jsp, taskflows.
But when I tried created a sample application with Model and View Controller. and a webservice in Model project, it runs OK.
Please guide with on this issue.
Appreciate your help in advance.
Regards,
Vara

I am getting the same error. What was the solution that worked for you? Please help

Similar Messages

  • Error while calling ejb service call from BPM service

    Hi,
    We are using the Oracle 11.1.1.5.0
    We are calling ejb service call from BPM service to update the data to Oracle database.
    We are getting the below error when we executing the ejb service call from BPM Service.
    <Error> <EJB> <BEA-010026> <Exception occurred du
    ring commit of transaction Name=[EJB oracle.bpm.bpmn.engine.ejb.impl.BPMNDeliver
    yBean.handleCallback(java.lang.String,java.lang.String,java.lang.String,int,bool
    ean)],Xid=BEA1-45B91984D57960994897(30845116),Status=Rolled back. [Reason=javax.
    transaction.xa.XAException: JDBC driver does not support XA, hence cannot be a p
    articipant in two-phase commit. To force this participation, set the GlobalTrans
    actionsProtocol attribute to LoggingLastResource (recommended) or EmulateTwoPhas
    eCommit for the Data Source = EBSConnection],numRepliesOwedMe=0,numRepliesOwedOt
    hers=0,seconds since begin=1,seconds left=60,XAServerResourceInfo[SOADataSource_
    base_domain]=(ServerResourceInfo[SOADataSource_base_domain]=(state=rolledback,as
    signed=soa_server1),xar=SOADataSource,re-Registered = false),XAServerResourceInf
    o[[email protected]@EBSConnection_base_domain]=(ServerResourceInfo[ArC
    [email protected]@EBSConnection_base_domain]=(state=rolledback,assigned=s
    oa_server1),[email protected],re-Registe
    red = false),SCInfo[base_domain+soa_server1]=(state=rolledback),properties=({web
    logic.jdbc.remote.EBSConnection=t3://192.168.10.114:8001, weblogic.transaction.n
    ame=[EJB oracle.bpm.bpmn.engine.ejb.impl.BPMNDeliveryBean.handleCallback(java.la
    ng.String,java.lang.String,java.lang.String,int,boolean)]}),local properties=({w
    eblogic.jdbc.jta.SOADataSource=[ No XAConnection is attached to this TxInfo ]}),
    OwnerTransactionManager=ServerTM[ServerCoordinatorDescriptor=(CoordinatorURL=soa
    server1+192.168.10.114:8001+basedomain+t3+, XAResources={eis/tibjms/Queue, eis
    /activemq/Queue, WLStore_base_domain_BPMJMSFileStore, WLStore_base_domain__WLS_s
    oa_server1, eis/fioranomq/Topic, eis/jbossmq/Queue, eis/Apps/Apps, eis/websphere
    mq/Queue, eis/AQ/aqSample, WLStore_base_domain_SOAJMSFileStore, eis/aqjms/Queue,
    WSATGatewayRM_soa_server1_base_domain, eis/sunmq/Queue, eis/pramati/Queue, SSCo
    nnectionDS_base_domain, eis/tibjms/Topic, eis/tibjmsDirect/Queue, eis/wls/Queue,
    eis/tibjmsDirect/Topic, EDNDataSource_base_domain, eis/wls/Topic, eis/aqjms/Top
    ic, RL3TST_base_domain, [email protected]@EBSConnection_base_domain, S
    OADataSource_base_domain, WLStore_base_domain_UMSJMSFileStore_auto_2},NonXAResou
    rces={})],CoordinatorURL=soa_server1+192.168.10.114:8001+base_domain+t3+): weblo
    gic.transaction.RollbackException: Could not prepare resource '[email protected]
    [email protected]_base_domain
    JDBC driver does not support XA, hence cannot be a participant in two-phase comm
    it. To force this participation, set the GlobalTransactionsProtocol attribute to
    LoggingLastResource (recommended) or EmulateTwoPhaseCommit for the Data Source
    = EBSConnection
    at weblogic.transaction.internal.TransactionImpl.throwRollbackException(
    TransactionImpl.java:1881)
    at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(Se
    rverTransactionImpl.java:345)
    at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTran
    sactionImpl.java:239)
    at weblogic.ejb.container.internal.BaseLocalObject.postInvoke1(BaseLocal
    Object.java:622)
    at weblogic.ejb.container.internal.BaseLocalObject.__WL_postInvokeTxRetr
    y(BaseLocalObject.java:455)
    at weblogic.ejb.container.internal.SessionLocalMethodInvoker.invoke(Sess
    ionLocalMethodInvoker.java:52)
    at oracle.bpm.bpmn.engine.ejb.impl.BPMNDeliveryBean_of8dk6_ICubeDelivery
    LocalBeanImpl.handleCallback(Unknown Source)
    at com.collaxa.cube.engine.dispatch.message.instance.CallbackDeliveryMes
    sageHandler.handle(CallbackDeliveryMessageHandler.java:47)
    at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(Dispatc
    hHelper.java:140)
    at com.collaxa.cube.engine.dispatch.BaseDispatchTask.process(BaseDispatc
    hTask.java:88)
    at com.collaxa.cube.engine.dispatch.BaseDispatchTask.run(BaseDispatchTas
    k.java:64)
    at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExec
    utor.java:886)
    at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor
    .java:908)
    at java.lang.Thread.run(Thread.java:662)
    Caused by: javax.transaction.xa.XAException: JDBC driver does not support XA, he
    nce cannot be a participant in two-phase commit. To force this participation, se
    t the GlobalTransactionsProtocol attribute to LoggingLastResource (recommended)
    or EmulateTwoPhaseCommit for the Data Source = EBSConnection
    at weblogic.jdbc.wrapper.JTSXAResourceImpl.prepare(JTSXAResourceImpl.jav
    a:83)
    at weblogic.transaction.internal.XAServerResourceInfo.prepare(XAServerRe
    sourceInfo.java:1327)
    at weblogic.transaction.internal.XAServerResourceInfo.prepare(XAServerRe
    sourceInfo.java:513)
    at weblogic.transaction.internal.ServerSCInfo$1.run(ServerSCInfo.java:36
    8)
    at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTunin
    gWorkManagerImpl.java:528)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    .>
    <12 Oct, 2012 12:34:40 PM IST> <Error> <oracle.soa.bpel.engine.dispatch> <BEA-00
    0000> <failed to handle message
    javax.transaction.xa.XAException: JDBC driver does not support XA, hence cannot
    be a participant in two-phase commit. To force this participation, set the Globa
    lTransactionsProtocol attribute to LoggingLastResource (recommended) or EmulateT
    woPhaseCommit for the Data Source = EBSConnection
    at weblogic.jdbc.wrapper.JTSXAResourceImpl.prepare(JTSXAResourceImpl.jav
    a:83)
    at weblogic.transaction.internal.XAServerResourceInfo.prepare(XAServerRe
    sourceInfo.java:1327)
    at weblogic.transaction.internal.XAServerResourceInfo.prepare(XAServerRe
    sourceInfo.java:513)
    at weblogic.transaction.internal.ServerSCInfo$1.run(ServerSCInfo.java:36
    8)
    at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTunin
    gWorkManagerImpl.java:528)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    >
    <12 Oct, 2012 12:34:40 PM IST> <Error> <oracle.soa.bpel.engine.dispatch> <BEA-00
    0000> <Failed to handle dispatch message ... exception ORABPEL-05002
    Message handle error.
    error while attempting to process the message "com.collaxa.cube.engine.dispatch.
    message.instance.CallbackDeliveryMessage"; the reported exception is: Error comm
    itting transaction:; nested exception is: javax.transaction.xa.XAException: JDBC
    driver does not support XA, hence cannot be a participant in two-phase commit.
    To force this participation, set the GlobalTransactionsProtocol attribute to Log
    gingLastResource (recommended) or EmulateTwoPhaseCommit for the Data Source = EB
    SConnection
    This error contained an exception thrown by the message handler.
    Check the exception trace in the log (with logging level set to debug mode).
    ORABPEL-05002
    Message handle error.
    error while attempting to process the message "com.collaxa.cube.engine.dispatch.
    message.instance.CallbackDeliveryMessage"; the reported exception is: Error comm
    itting transaction:; nested exception is: javax.transaction.xa.XAException: JDBC
    driver does not support XA, hence cannot be a participant in two-phase commit.
    To force this participation, set the GlobalTransactionsProtocol attribute to Log
    gingLastResource (recommended) or EmulateTwoPhaseCommit for the Data Source = EB
    SConnection
    This error contained an exception thrown by the message handler.
    Check the exception trace in the log (with logging level set to debug mode).
    at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(Dispatc
    hHelper.java:207)
    at com.collaxa.cube.engine.dispatch.BaseDispatchTask.process(BaseDispatc
    hTask.java:88)
    at com.collaxa.cube.engine.dispatch.BaseDispatchTask.run(BaseDispatchTas
    k.java:64)
    at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExec
    utor.java:886)
    at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor
    .java:908)
    at java.lang.Thread.run(Thread.java:662)
    >
    Could any body help on this issue.It is little bit urgent for us to resolve.
    Thanks in advance.

    Thanks Sudipto Desmukh,
    The link is helpful me to resolve this issue.
    Thanks,
    Narasimha E

  • Error running Web Services in DEMO : User is not Authorized error

    Hi all,
    We created a Web Service in our DEMO installation of ERP9 Tools 8.97, Database Local SSE (User - DEMO, Password-DEMO). The Web Service is using JDE Vanilla BSFN - B0100021 - Formatted Address and created through JDeveloper using JDE BSSV tool.
    When we are running the Web Service (TestCustomWebService) from JDeveloper (Right Click and Run) it is providng an url (http://moequbal:8988/context-root-JP55HOL/TestCustomWebServiceSoapHttpPort) and when we are pasting the URL in the browser and entering a valid value in the Input field and pressiing the 'Invoke' Button, the following Error pops up -
    "<env:Envelope
    xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"
    xmlns:xsd="http://www.w3.org/2001/XMLSchema"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xmlns:ns0="http://oracle.e1.bssv.JP55HOL/types/">
    <env:Body>
    <env:Fault>
    <faultcode>env:Server</faultcode>
    <faultstring>Internal Server Error (Caught exception while handling request: oracle.e1.bssvfoundation.exception.E1AuthorizationException: User is not authorized to invoke this published business service)</faultstring>
    </env:Fault>
    </env:Body>
    </env:Envelope>"
    Please help.
    Thanks,
    Tufan

    I can confirm that the lab and BSSV functionaly works in DEMO, I have it working nicely. However, I dont think you can deploy this to a Business Services server. I haven't tried as yet. but you can test all the published BSSV via jDeveloper to verify that you have the correct code. It starts O4CJ and web services locally and brings up an input web page to enter the AN8, the data outputs to XML.
    Tip:
    1) Make sure that you have an entry in the P00950 security workbench. .
    2) make sure that you select the BSSV item (i.e CustomAddressManager) and select 'set to publish' available (this only appears on checkin) when you check the object in. Make sure that you have entries in the F98601, 602, 603 tables in Object Librarian
    3) Open P00950 select published bssv, click on the grid line (1st column) in the grid form of W00950X click the searchlight, in W00950U hit find you must see your published BSSV in here.
    if not you go back to step 2. You must 'set to publish' for the bssv i.e CustomAddressManager object. Otherwise you will not be able to see in the W00950U form.
    4) Repeat for the 2nd column and Make sure you select the 'Secure by Method' this will take you to W00950Y form and you must select your bssv and select the 'Allow Execute' on the bottom of the form.
    Once you have these in place then you will not get the 'Not authorized' error messages.
    Christopher Koloszar
    JDE Senior Business Analyst
    Oracle 10g DBA
    [email protected]
    Edited by: user3025204 on 15-Oct-2009 02:00

  • Error running web services examples

    Hi Guys,
    After spending the whole day finally i get the soap server working. I have to manually deploy soap.ear into OC4j instance. But again i am trying to run web services stateless java say hello class example... but no luck. I am getting connection refuse error... Did any one tried these examples.... I am using Jdeveloper9i on win 2000 professional machine.
    I am getting connection refused error ...if i try to run example....
    Any help will be appreciated..
    thnks
    vijay

    See:
    Check for uniqueness of data in a column
    In your response, could you elaborate on "connection refused" ... is this the application server that you are testing? If you are setting up the SOAP Server connection, this is not required by those tutorials as shown by the Quickstart setup that they point to.
    It would also help to know the versions of JDev and OC4J you are using (e.g. are you using JDev 9.0.3 and OC4J 9.02; have you got a full install of Oracle9iAS 9.02 etc). Without more details it can be hard to help.
    I wrote most of the tutorials at a point in time so they tend to be pretty specific about version numbers. If you are using different versions they should work but I might be able to point out any problems you might run into.
    Mike.

  • Properties of Web Services generated from Application services in CAF

    Hi to all,
    first sorry for posting one question twice (in CAF and CE forums) but I am not sure where exactly it belongs.
    I experience problems with exposing web services from application service in CE 7.1 (trial version).
    I want to add fault elements or use document literal instead of RPC binding. I do it from the design page for web services. The problem is that after saving and regenerating the application, the changed information gets lost.
    Is it possible to expose these services while changing some information?
    And another question that would arise if this is possible. How can I catch the faults in VC? Is there e possibility to show different panels according to the value returned (from the data service, which is a web service with fault element).
    Thank You in advance!
    V S

    Hi,
    Please check note 1004108.
    Methods of Application and/or Entity Services (Business Objects) of CAF of SAP NetWeaver CE 7.1 cannot be exposed in document style, only RPC/literal is possible. Sorry.
    It's a restriction that is planned to be solved in one of the next releases.
    Regards,
       Jan

  • Error with Active Directory Synchnorisation from Shared Services to Essbase

    Have recently installed HS9 v 9.3.1
    In Shared Services i have created both native and MSAD users. Everything works fine with the native users (Planning,EAS etc...)
    MSAD user directory has been configured & tested -ok on Workspace.
    The MSAD users have been provisioned and can access Workspace & Shared services without any issue.
    However, when accessing Planning, the following error is displayed in the Essbase server log:
    Tue Mar 18 15:12:39 2008]Local/ESSBASE0///Info(1051001)
    Received client request: Create External User With Type (from user [hyperion])
    [Tue Mar 18 15:12:39 2008]Local/ESSBASE0///Error(1051205)
    Single Sign On function call [css_getUser] failed
    [Tue Mar 18 15:12:39 2008]Local/ESSBASE0///Warning(1051003)
    Error 1051205 processing request [Create External User With Type] - disconnecting
    [Tue Mar 18 15:12:39 2008]Local/ESSBASE0///Info(1051001)
    Received client request: Set Application FrontEnd Type (from user [hyperion])
    [Tue Mar 18 15:12:39 2008]Local/ESSBASE0///Info(1051001)
    Received client request: Get Security Mode (from user [hyperion])
    [Tue Mar 18 15:12:39 2008]Local/ESSBASE0///Info(1051001)
    Received client request: Set Application Id For Planning (from user [hyperion])
    [Tue Mar 18 15:12:39 2008]Local/ESSBASE0///Info(1051001)
    Received client request: Get Security Mode (from user [hyperion])
    [Tue Mar 18 15:12:39 2008]Local/ESSBASE0///Info(1051001)
    Received client request: Get Security Mode (from user [hyperion])
    [Tue Mar 18 15:12:39 2008]Local/ESSBASE0///Info(1051001)
    Received client request: Re-Sync User/Group with Single application (from user [hyperion])
    [Tue Mar 18 15:12:39 2008]Local/ESSBASE0///Info(1051590)
    Synchronization started for user/group [MSADUser]
    [Tue Mar 18 15:12:39 2008]Local/ESSBASE0///Info(1051591)
    Synchronization completed for user/group [MSADUser]
    [Tue Mar 18 15:12:39 2008]Local/ESSBASE0///Error(1051013)
    User/group MSADUser does not exist
    [Tue Mar 18 15:12:39 2008]Local/ESSBASE0///Warning(1051003)
    Error 1051013 processing request [Re-Sync User/Group with Single application] - disconnecting
    ---------- When accessing through XL Addin, the foll is displayed:
    [Tue Mar 18 16:49:09 2008]Local/ESSBASE0///Error(1051012)
    User MSADUser does not exist
    [Tue Mar 18 16:49:09 2008]Local/ESSBASE0///Warning(1051003)
    Error 1051012 processing request [Login] - disconnecting
    Thanks !!!

    Hardcode IP addresses instead of the server names in the essbase.cfg file and the Shared Services CSS.XML file for the Shared Services server references.
    Restart SS/Essbase, provision an MSAD user, then do a Refresh from Shared Services in AAS.
    Verify your MSAD userID then shows up as an Essbase user in AAS(Display User list for the Essbase server)
    As long as the MSAD users show up in the user list, they should be working.

  • Can I run a shell script from the services menu?, part II

    Remember this?
    It is now possible.

    Doesn't look like there is a direct way to do it.
    The services are all Bundles, which is easy
    enough to fake -- just copy one from /Library/Services
    to ~/Services and modify the plist. Put your shell
    script in Contents/MacOS/ and identify it in the
    plist under CFBundleExecutable and hope for the
    best
    Where it gets sticky is CFBundlePackageType (APPL
    for Application, FMWK for FrameWork, BNDL for
    'loadable bundle', whatever that is] and NSServices.
    CFBundlePackageType should pose no problem if Services
    use the OS loader and handles file magic [and '#!' of
    course].
    NSServices specifies a named port that the app
    listens on, the data type it receives, and so forth.
    This looks a bit harder to fake. I'd bet Applescript
    has the functionality, and there may be some
    command-line hooks to backend that, or it may be
    possible to netcat your way through it.
    But it doesn't look trivial
    Property List Key Reference
    Anyways, tried it with a quick script that echoes to a
    file, and haven't figured out how to refresh the
    Services menu to get it to appear. Probably have
    to NetInfo it or something ridiculous; doesn't appear
    to watch the FS.
    [ Edited by Apple Discussions Moderator; href URL ]

  • Can I run a shell script from the Services menu?

    This would be kind of cool.
    Is there a simple way to do this?

    Doesn't look like there is a direct way to do it.
    The services are all Bundles, which is easy
    enough to fake -- just copy one from /Library/Services
    to ~/Services and modify the plist. Put your shell
    script in Contents/MacOS/ and identify it in the
    plist under CFBundleExecutable and hope for the
    best
    Where it gets sticky is CFBundlePackageType (APPL
    for Application, FMWK for FrameWork, BNDL for
    'loadable bundle', whatever that is] and NSServices.
    CFBundlePackageType should pose no problem if Services
    use the OS loader and handles file magic [and '#!' of
    course].
    NSServices specifies a named port that the app
    listens on, the data type it receives, and so forth.
    This looks a bit harder to fake. I'd bet Applescript
    has the functionality, and there may be some
    command-line hooks to backend that, or it may be
    possible to netcat your way through it.
    But it doesn't look trivial
    Property List Key Reference
    Anyways, tried it with a quick script that echoes to a
    file, and haven't figured out how to refresh the
    Services menu to get it to appear. Probably have
    to NetInfo it or something ridiculous; doesn't appear
    to watch the FS.
    [ Edited by Apple Discussions Moderator; href URL ]

  • Not able to run web dynpro application from portal.

    Hi portal experts,
    I want to run my web dynpro application from portal.
    So created a seperate iview  and a role  for the purpose.
    Assigned the iview to the role and also mapped a abap user id to the new role created.
    But when I click on 'preview'  the iview , getting the following dump.
    Error when processing your request
    What has happened?
    The URL http://mnghcmsap:8000/sap/bc/webdynpro/sap/zhr_cp_admin/ was not called due to an error.
    Note
    The following error text was processed in the system HRM : Die URL enthält keine vollständige Domainangabe (mnghcmsap statt mnghcmsap.<domain>.<ext>).
    The error occurred on the application server mnghcmsap_HRM_00 and in the work process 0 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    Method: CHECK of program CX_FQDN=======================CP
    Method: STARTUP_CHECKS of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
    Method: HANDLE_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
    Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
    Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
    Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
    Module: %_HTTP_START of program SAPMHTTP
    What can I do?
    If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system HRM in transaction ST22.
    If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server mnghcmsap_HRM_00 in transaction SM21.
    If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server mnghcmsap_HRM_00 . In some situations, you may also need to analyze the trace files of other work processes.
    If you do not yet have a user ID, contact your system administrator.
    Error code: ICF-IE-http -c: 200 -u: INF51515 -l: E -s: HRM -i: mnghcmsap_HRM_00 -w: 0 -d: 20110209 -t: 121224 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION
    HTTP 500 - Internal Server Error
    Your SAP Internet Communication Framework Team
    Please let me know if I am doing the process correctly and also let me know if I am missing somthing.
    Thanks,
    Aditya.

    Are you able to run teh web dynpro application independtly i.e. without creatin an iview.
    http://mnghcmsap:8000/sap/bc/webdynpro/sap/zhr_cp_admin/ by using this link.
    or there also you are getting the error.
    i guess there also you should be gettign the error.
    this is some problem with the FQDN settings in the abap system.
    in the host name of the web dynpro applciation server one .(dot) is must.
    so you might have to change the host name to some thing like mnghcmsap. from mnghcmsap
    thanks
    sarbjeet singh

  • After sql server 2012 installation, I have changed sql server database engine service account from network service user to system user. What is disadvantages of this process?

         After
     sql server 2012 installation, I   attached my production db. Because of some reasons, i
     changed sql engine account from network service user to system user by means of sql server configuration manager.
         Now , there isn’t
     a problem at sql server running system.  But
    I have doubts that
     this can produce problems later. Because  sql server database engine account must have privileges that listed below;
    Log on as a service (SeServiceLogonRight)
    Replace a process-level token (SeAssignPrimaryTokenPrivilege)
    Bypass traverse checking (SeChangeNotifyPrivilege)
    Adjust memory quotas for a process
    (SeIncreaseQuotaPrivilege)
    Permission to start SQL Writer
    Permission to read the Event Log service
    Permission to read the Remote Procedure Call service
     While sql server installation, setup gives these
     privileges to network service user automatically, but changing user by means of sql confugarition manager does not give these
    privileges.
    Now, system user has privileges listed below. And sql server has been running for 1,5 months without any problems.
    Log on as a service (SeServiceLogonRight)
         Bypass traverse checking
    (SeChangeNotifyPrivilege) (Everyone user has his privileges. So i think that system user has this privilege also)
    What problems can occur because of this situation? Shall i give other privileges to system user and restart sql server or not? And how can i give these privileges to system user listed below;
    Replace a process-level token (
    this can be set from user rights assignments)
    Adjust memory quotas for a process
    (this can be set from user rights assignments)
    Permission to start SQL Writer ( 
    ? - give advice )
    Permission to read the Event Log service (
    ? - give advice )
    Permission to read the Remote Procedure Call service (
    ? - give advice )

     Our server is  windows server 2008 r2 enterprise edition. I have looked the bunch of permissions in user rights menu  that is in local security policy settings gui.
    And i have seen those permissions below were not granted to system user;
    Bypass traverse checking (SeChangeNotifyPrivilege)
    Adjust memory quotas for a process
    (SeIncreaseQuotaPrivilege)
    So, briefly you say, don't panic ?

  • Prevent Service PO from exceeding Service PR

    Hi masters!
    Requirement is to display an error message or warning when Service PO exceeds Service PR in ME21n.
    The message "Materials of requisition XXXX item XXX alr. ordered in full" triggers when Material PO exceeds Material PR, but no such error appears for Service PR and PO. We want to prevent Service PO that exceeds Service PR.
    Any suggestions? Looking forward to your valuable insights!
    Thank you very much
    Sincerely,
    Mozart Pena

    Hi Mrpena,
    Please also visit the following link.
    Re: "Materials of requisition 300004365 item 00010 alr. ordered in full".
    Regards,
    MT

  • How to extract external directory users from a shared services group from shared services RDBMS repository

    Hi,
    I have a security group in shared services, which has external directory users. I want to extract the list of users from shared services RDBMS repository using a SQL query. Please let me know if this is possible and from which table(s) I can query such list.
    Thanks...

    You need to use CSS_Groups, CSS_GROUP_MEMBERS and CSS_USERS tables in your Foundation DB. Something like below will give you these details:
    select b.Name  ,a.Name  from HYPFOUND.CSS_GROUPS b ,
    HYPFOUND.CSS_USERS a ,
    HYPFOUND.CSS_GROUP_MEMBERS c
    WHERE c.MEMBER_IDENTITY = a.IDENTITY_ID and
    c.GROUP_IDENTITY = b.IDENTITY_ID
    GROUP BY (b.Name,a.name)

  • Error run web application designer 3.X

    hello forum,
    When I run the tool designer of the web application version 3.x.
    jumps the following error:
    Run-time error "75"
    Path / file access error.
    I have installed the patch:
    gui710_7-10002995.exe: Patch Level 7 for SAP Logon.
    bi710sp05_500-10004472.exe: BI Add-on 7.x, Support Package 5, Patch Level 5.
    And he still does not work, you know if I need to install any more patch or perform some sort of setup?
    A greeting and thanks.

    Hi,
    You are talking in the query designer?
    But that will only appear the result (with value) red or green or yellow, correct?
    The idea is not to show the value, only the light.
    Example:
    I have the following:
    Client|Value|
    11    | 10eur
    12    | 12eur
    13    | -2eur|
    The idea is to have the following:
    Client|Alert|
    11    |  Green
    12    |  Green
    13    |  Red
    Green to positive, red to negative, but only a light, no values displayed.
    Thanks!
    Edited by: Pedro Taveira on Nov 3, 2011 2:03 PM

  • Error Running Doc-Level JavaScript from VBS

    I have the document level javascript function in my PDF document "FillForm()", (see code below).  When I run my VBS code, (see code below) I get the error:  "Run-time Error '438': Object doesn't support this property or method." on the "jso.FillForm" line.  I can execute 'jso.console.Show' without a problem.  What am I doing wrong?  (Oh, and it has to be a document level funtion, and not a folder level function.  And once I get this working, I'll be passing parameters.  I'm using a stripped down function just to get this to work).
    DOCUMENT JAVASCRIPT
    //<Document-Level>
    //<ACRO_source>FillForm</ACRO_source>
    //<ACRO_script>
    /*********** belongs to: Document-Level:FillForm ***********/
    function FillForm()
    var textHolder;
    textHolder = this.getField("dorReturnAddress");
    textHolder.value = "dorReturnAddress";
    textHolder = this.getField("attn");
    textHolder.value = "attn";
    //</ACRO_script>
    //</Document-Level>
    VBS CODE
      Dim wAcro As Acrobat.AcroApp
      Dim dAcro As Acrobat.AcroPDDoc
      Dim jso As Object
      Set wAcro = CreateObject("AcroExch.App")
      wAcro.Show
      Set dAcro = CreateObject("AcroExch.PDDoc")
      dAcro.Open (ThisDocument.Path & "\" & "Worksheet - Template.pdf")
      Set jso = dAcro.GetJSObject
      jso.FillForm
    - Thanks in Advance!

    You can use the function ExecuteThisJavascript. Read more here:
    http://www.acrobatusers.com/forums/aucbb/viewtopic.php?id=16431

  • Error While Commiting .PAK files from ODDC Services

    Hi
    I am trying to scan and commit documents using ODDC client. I am able to successfully send the Document from Remote Location and corresponding .PAK files are also created but when ODDC services try to process and Commit the document, i get following errors:
    ***Error*** Failed to process batch 36137617_36138113. Error Number: 40008, Error: Failed to commit batch (with delete). Commit Profile - ecm: The following error was reported by ReleaseDocument. Error Number: 20004 Error Description: HTTP/1.1 302 Moved Temporarily
    I also get following error in another file:
    Tue Dec 27 01:04:46 HST 2011 INFO Document file name is C:\Oracle\ODC\Batches\008\0000000J\0000000J_1.
    Tue Dec 27 01:04:46 HST 2011 INFO Begin Check In Process.
    Tue Dec 27 01:04:46 HST 2011 INFO Idc service = CHECKIN_UNIVERSAL.
    Tue Dec 27 01:04:46 HST 2011 INFO Parsing xml to obtain fields data.
    Tue Dec 27 01:04:46 HST 2011 INFO dDocTitle: W2 Company.
    Tue Dec 27 01:04:46 HST 2011 INFO dDocType: HRW2COMP.
    Tue Dec 27 01:04:46 HST 2011 INFO Field DocAuthor: weblogic.
    Tue Dec 27 01:04:46 HST 2011 INFO dSecurityGroup: Public.
    Tue Dec 27 01:04:46 HST 2011 INFO Field xCompanyName: sys.
    Tue Dec 27 01:04:46 HST 2011 INFO Field xCompanyNo: 345.
    Tue Dec 27 01:04:46 HST 2011 INFO Field xYear: 1980.
    Tue Dec 27 01:04:46 HST 2011 INFO dDocAuthor: weblogic.
    Tue Dec 27 01:04:46 HST 2011 INFO dDocAccount: .
    Tue Dec 27 01:04:46 HST 2011 INFO primaryFile: C:\Oracle\ODC\Batches\008\0000000J\0000000J.1.
    Tue Dec 27 01:04:46 HST 2011 SEVERE Failed to check in document. Exception: {0}. Error is: oracle.stellent.ridc.protocol.http.HttpProtocolException: HTTP/1.1 302 Moved Temporarily
         at oracle.stellent.ridc.protocol.http.IdcHttpProtocol.writeRequest(IdcHttpProtocol.java:171)
         at oracle.stellent.ridc.IdcClient.sendRequest(IdcClient.java:140)
         at com.oracle.capture.UCM11g.Driver.checkIn(Driver.java:192)
         at com.oracle.capture.UCM11g.ComDriver.checkIn(ComDriver.java:42)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
         at java.lang.reflect.Method.invoke(Unknown Source)
         at com.jniwrapper.win32.com.server.IDispatchServer.invoke(SourceFile:209)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
         at java.lang.reflect.Method.invoke(Unknown Source)
         at com.jniwrapper.win32.com.server.CoInterfaceVTBL$VirtualMethodCallback.b(SourceFile:232)
         at com.jniwrapper.win32.com.server.CoInterfaceVTBL$VirtualMethodCallback.callback(SourceFile:135)
         at com.jniwrapper.Callback.enterPoint(SourceFile:222)
         at com.jniwrapper.Function.invokeCFunc(Native Method)
         at com.jniwrapper.FunctionCall.a(SourceFile:126)
         at com.jniwrapper.FunctionCall.call(SourceFile:34)
         at com.jniwrapper.Function.invoke(SourceFile:188)
         at com.jniwrapper.Function.invoke(SourceFile:212)
         at com.jniwrapper.win32.MessageLoopThread$LoopThread.run(MessageLoopThread.java:489)
    I would appreciate if someone can help me in the same as it's too urgent and i have tried almost everything but no luck.
    Regards
    ACM

    There is just another post with similar issues: UCM 11g + RIDC (no resolution)
    However, my guesses are that the problem lies is RIDC rather than ODDC. If you are experienced enough, you could try to create a simple RIDC program checking in a document and chances are it will end up with the same error. I also guess that problem could actually be related to RIDC configuration in Enterprise Manager - unlike in 10g, in 11g you have to explicitly enable RIDC communcations - check e.g. here how to do it: http://andrejusb.blogspot.com/2011/02/bpm-portal-11g-ps3-how-to-configure.html
    I'm afraid I have no other clue.

Maybe you are looking for

  • Uninstall of Adobe Reader 9.5.5 to install Adobe 11

    Odd problem with Adobe Reader on Windows XP SP3... I hope. I had 9.5.5 installed after a reinstall of XP, and want to upgrade to Adobe 11. When I try to uninstll from Add/Remove in my Control Panel, the process fails saying 9.5.5 is installed on Driv

  • Problem setting up model WRT54G

    I am having difficulty in setting up my Wireless -G Broadband router model #WRT54G.  I Have Comcast High-Speed Cable Internet.  My internet connection times out after a few minutes and my connection is lost after a successful configuration of the rou

  • Why is iPhoto doing this none stop?

    My iPhoto does this none stop. I've restarted. I've restarted the computer, deleted the plist file and it still does it none stop no matter how long I leave it open. Is there a quick fix.  It started this after I created another library.

  • An error has occurred in the system "ECC" while copying the document

    Hello Experts, When I'm creating service orders in CRM UI and saving them I'm receiving this error: An error has occurred in the system "ECC" while copying the document Details: An error has occurred in the system "ECC" while copying the document Mes

  • Is it possible to use the camera while the phone is locked

    I would like to be able to use the camera without having to unlock the Blackberry. Sometimes you want to take a quick picture but you have to unlock the phone and you miss what you wanted. I would like to know if this is possible