Error: Sender agreement not found, lookup of binding via CPA-CACHE failed.
Hi,
I am doing an RFC to File Scenario in which RFC has to be triggered from CRM system. The TCP/IP connection and communication Channel are working fine. But when i trigger my RFC using the RFC destination following errors occur:
1. The SYSTEM_FALIURE exception comes on CRM side.
2. In adapter monitoring the following error comes on XI side:
Error: Sender agreement not found, lookup of binding via CPA-CACHE failed for Adapter type RFC.
I have also tried the scenario with RFC request as source message and also after J2EE cache refresh but the problem still persists. And one more thing my file adapter (In receiver communication channel) is not working means it is not started. And no message is coming in SXMB_MONI.
Could anyone please help me to resolve this issue.
Regards,
Vinay Yadav
Hi Aaron,
I had the same error and your feedback solved my problem!
Thank you sooo much!!!!
Luciana
Similar Messages
-
Hi,
I have configured asynchronous sender RFC to JDBC scenario and when I execute RFC I get short dump "senderAgreement not found: lookup of binding via CPA-cache failed for..."
My scenario configurations, RFC destination, are all okey..
A Hint:
Our XI Server is "LARA"
Our R/3 4.6C Server is "ZULIA"
This are the RFC Sender Communication Channel on LARA:
RFC Server Parameter
Application Server (Gateway): ZULIA
Application Server Service (Gateway): sapgw00
Program ID: DEV210
SNC: NOT CHECKED
UNICODE: NOT CHECKED
Inital Connections: 10
Maximum Connections: 10
Advanced Mode: NOT CHECKED
RFC Metada Repository Parameter
Load Balancing: NOT CHECKED
Application Server: ZULIA
System Number: 00
Authentication Mode: Use Logon Data for SAP System
Logon User: ldiego
Logon Password: **********
Logon Language: ES
Logon Client: 210
Adapter-Specific Message Attributes
Set Adapter-Specific Message Attributes: NOT CHECKED
This are the configuration of RFC Destination on ZULIA:
RFC Destination Name: XI_RFC
Connection Type: T
ID Program: DEV210
Host Gateway: ZULIA
TCP Service sapgw00
Must I create the RFC Destination on the JCo RFC Provider in Visual Administrator?<i>Is the RFC destination created in the R/3 is pointing correctly to the XI system and vice -versa. Test the connection.</i>
I tested my RFC Destination from R/3 system and the response was successful. What do you mean about vice-versa? How do I test it in the other way?.
I recreate my Sender Agreement. And my Business System is correct.
This are the parameters of my Sender Agreement:
Service: DES210_DEV
Interface: Z_DATOS_SAP
Namespace: urn:sap-com:document:sap:rfc:functions
Sender Communnication Channel: cc_s_rfc_dataCom
When I execute the FM in R/3 the dump now is:
Wrong Sender Agreement:The Sender agreement does not have channel -
Lookup of alternativeServiceIdentifier via CPA-cache failed for channel
Hi,
In RFC(ECC) to File(PI) scenaio i am facing the following error in sender CC:
Error in processing caused by: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: lookup of alternativeServiceIdentifier via CPA-cache failed for channel SND_RFC
-CC' (f455868123qq3bba4c3dc3dbf93ed1b, party '', schema 'TechnicalSystem', identifier 'ECC#110')
I have done the following for RFC to File scenario:
ECC side:
1. Created a RFC and tagged it to BAPI
2. In the ABAP program, i am calling the RFC like below:
CALL FUNCTION 'Z_HR_OUTBOUND_DATA2'
IN BACKGROUND TASK DESTINATION 'Z_HR_OUTBOUND_DATA2'
EXPORTING
INTERFACE =
IMPORTING
FILENAME = FILENAME
RETURN = RETURN
TABLES
ITAB10 = ITAB10
P_STATUS = P_STATUS
COMMIT WORK.
3. Created a RFC destination using SM59
RFC detination : Z_HR_OUTBOUND_DATA2
Connection type : TCP/IP
Enabled Registered Server Program
Program ID : ECCTOPI_OUTBOUND
Gateway host : ECC's host number
Gateway service : ECC's service number.
In PI side:
I have created :
1 DT for File Rcvr
1 MT for File Rcvr
1 SI for File Rcvr (async)
1 MM (sender RFC and receiver File)
1 OM
1 CC with RFc as sender with the following parameters:
Communication component : ECC's component
application server (gateway) : ecc's gateway
application server service(Gateway) : ecc's service number
Program id : ECCTOPI_OUTBOUND
inital connections 1
max. connections 1
And also gave ecc's details in application server , s/y number, auth. mode, logon user ,
pwd, ecc's client number
1 CC with File adapter and file content conversion
1 receiver determination
1 interface determination
1 sender agreement
1 receiver agreement
When i am executing the ABAP program in R/3 I am getting the following error:
Error in processing caused by: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: lookup of alternativeServiceIdentifier via CPA-cache failed for channel SND_RFC
-CC' (f455868123qq3bba4c3dc3dbf93ed1b, party '', schema 'TechnicalSystem', identifier 'ECC#110')
Please let me know if any of my steps are wrong and how to rectify this error and make
the scenario working.
Thanks for your help.I have mentioned the Adapter specific parameters properly.
It contains :
For ECC s/y(i.e for RFC)
Logical system : DECCLNT120
R/3 system ID : DEC
Client 120
For PI (i.e for File)
Logical system : DPICLNT100
R/3 system ID : DPI
Client 100
Since i am sending the Response of the RFc to the file, i have used a Service interface where i am passing the RFC.Response as Request.
if i am passing the RFC directly as i/p in Source operation of Operation mapping then it doesn't pick up the response in the souce message of the mapping program present in Operation mapping.
So i am passing the same SI_Sender_RFC in the Sender Agreement and it gives the error:
Error in processing caused by: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: senderAgreement not found: lookup of binding via CPA-cache failed for AdapterType RFC, AdapterNS http://sap.com/xi/XI/System, direction INBOUND, fromParty '', fromService 'DEC_RFC', toParty '', toService '', interface 'Z_HR_OUTBOUND_DATA2', NS 'urn:sap-com:document:sap:rfc:functions' for channel 'CC_LOTUSNOTES_OUTBOUND_SND_RFC' (channelId c78f5a88787131a09384c07c2db0e93b)
why is it so? -
RFC Sender - lookup of alternativeServiceIdentifier via CPA-cache failed
Hello,
I am using RFC Sender for a scenario and while sending message I got following error. I found this error while monitoring communication channel. I looked at several posting on this issue and tried with both checking and not checking check box of advanced mode (RFC sender communication channel configuration). I am getting the same "lookup of alternativeServiceIdentifier via CPA-cache failed" error. How did you resolved?, please let meknow.
Did any one come across error
Server 0 0_50478 Sender channel 'CC_GET_CUSTOMER_RFC_SENDER' for party '', service 'SAP_DFR' (internal name 'RfcServer[CC_GET_CUSTOMER_RFC_SENDER]')
Server data: {jco.server.gwhost=XXXXXXXXXX, jco.server.progid=DFX_XI_00, jco.server.gwserv=sapgw00, XI_RFC_USER=*****, jco.server.unicode=0}
Repository data: {jco.client.lang=EN, jco.client.snc_mode=0, jco.client.client=120, jco.client.passwd=******, jco.webas.ignore_jdsr_error=1, jco.client.user=XI_RFC_USER, jco.client.sysnr=00, jco.client.ashost=XXXXXXXXXX}
Current pool size: 1, maximum pool size : 1
Channel History
- Error: 2007-09-20 10:32:14 CDT: com.sap.aii.af.rfc.afcommunication.RfcAFWException: lookup of alternativeServiceIdentifier via CPA-cache failed for channel 'CC_GET_CUSTOMER_RFC_SENDER' (bee9e190f51f3687b1072bf3f5446a70, party '', schema 'TechnicalSystem', identifier 'DFR#120')
Thank you,
Balajirun tc SXI_cache on the XI
on that screen press Shift+f6, it will start the refresh....and also do the CPAcahe manually trough the link
http://itmisapxi:50000/CPACache/refresh?mode=full
with PIRDIRUSER and then check the interfce.... -
RFC Sender adapter - Sender agreement not found Error
Hi ,
I am getting this error when i send an RFC request to XI from SAP.
Exception thrown [Fri Aug 05 10:10:35,624]:Exception thrown by application running in JCo Server
com.sap.aii.af.rfc.afcommunication.RfcAFWException: senderAgreement not found: lookup of binding via CPA-cache failed for AdapterType RFC, dapterNS http://sap.com/xi/XI/System, direction INBOUND, fromParty '', fomService 'HORIZONISU', toParty '', toServ
#at com.sap.aii.af.rfc.afcommunication.Message.getEmptyMsMessage(Message.java:345)
#at com.sap.aii.af.rfc.afcommunication.Message.buildMsMessage(Message.java:215)
#at com.sap.aii.af.rfc.afcommunication.ToAdapterFramework.sendSynchronous(ToAdapterFramework.java:341)
#at com.sap.aii.af.rfc.core.server.RfcServer.handleRequest(RfcServer.java:525)
#at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java(Compiled Code))
#at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java(Compiled Code))
#at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java(Compiled Code))
#at com.sap.mw.jco.JCO$Server.listen(JCO.java:6926)
I have configured a sender RFC adapter in XI with a specific "program id". This RFC adapter is available under a Business System of type WebAS ABAP in integration directory.
I have created an RFC in my SAP system (it just has IMPORT & EXPORT parameters, no SrcCode), i also have an RFC destination of type T in SAP which has the program id specified in my RFC adapter config. The application host & gateway in this RFC destination point to itself(points the same SAP system where the RFC destination is created)
Now i trigger the RFC from an other function module with destination parameter pointing to the RFC destination of type T created in SAP.
Is the above config ok ? If not what do i need to check , pointers pls. I get a dump in SAP when i execute the function module calling the RFC , and i see the above stacktrace in XI log.
Thanks
SaravanaHi Saravana,
1. have you created a senderAgreement for your scenario? (senderAgreement not found)?
2. do you commit your RFC call with commit work? ( just to make sure )
3. is your RFC dest working? when you test it in SM59?
Regards,
michal -
Test Configuration Tool: Sender Agreement Not Found
Hi, All:
We have new XI3.0 setup and I just want to test simple file to file scenario, but the file was picked up by sender file adapter, however, there is no message sent to Integration server.
When I use Test Configuration Tool, the sender agreement is green, however, it also mention Sender Agreement Not Found, see below:
================================================
Sender Agreement
================================================
futhermore, Interface Mapping is not found either. Actually, Interface has been created on IR. Sender Agreement also created in ID.
Anyone who has idea about these two errors ?
Thanks in advance
LiangHi, Raj and Srinivas:
Thanks for your reply.
First of all, all the objects are activated, secondly, when create sender agreement, I just need to input the Sender Service Name / Sender Interface / Sender Interface Namespace. Then finally select commnication channel.
For any Receiver sides, they are grey out, I am not able to input anything.
So, there is no "*" in any fields.
I doubt if there is any setup wrong, especially for adapter engine, maybe some modules that are not functional for file adapter engine, since I also see other problems, I might post them as separate thread.
In Adapter monitor page, I did not see the adapter.
In RWB, if I use IE, there is Error in the page, using Firefox, it is OK.
Thanks And Regards !
Liang -
Using file adapter, got "Sender Agreement not found" error
I used file adapter in my CC and defined all the necessary objects. When I tried to test the configuration and I kept getting "Sender Agreement" error.
Also the chache is cleared too, searched the forum already, couldn't find any clue
Not sure what I did wrongHi,
First things first, ensure you have an agreement for each single Communication Channel you have
and that they are correctly associated.
If they are created and associated, you may try the cache refresh with the link:
http://host:j2eeport/CPACache/refresh?mode=full
Kind regards,
Caio Cagnani -
Error : Receiver agreement not found
Hi all,
My scenario is RFC to JDBC.
Its showing the below error, when 'I try to send data through test configuration after configuring ESR and ID part.
Receiver Agreement
Runtime error
Problem occurred in receiver agreement for sender -SAP_BL_ISU to receiver -RFC_To_JDBC_Async_R_SQL_bllmstest,urn:sap-com:document:sap:rfc:functions.ZTEST_TIPS_DOI1: No standard agreement found for , SAP_BL_ISU, , RFC_To_JDBC_Async_R_SQL_bllmstest, urn:sap-com:document:sap:rfc:functions, ZTEST_TIPS_DOI1
<Trace level="1" type="B">CL_XMS_PLSRV_OUTBINDING-ENTER_PLSRV</Trace>
<Trace level="2" type="T">O U T B O U N D - B I N D I N G </Trace>
<Trace level="2" type="T"> Cache Content is up to date </Trace>
<Trace level="2" type="T">determine OUTBOUND BINDING for: </Trace>
<Trace level="2" type="T">-SAP_BL_ISU </Trace>
<Trace level="2" type="T">-RFC_To_JDBC_Async_R_SQL_bllmstest </Trace>
<Trace level="2" type="T">urn:sap-com:document:sap:rfc:functions.ZTEST_TIPS_DOI1 </Trace>
<Trace level="1" type="T">error with outbound binding. </Trace>
<Trace level="1" type="T">No standard agreement found for , SAP_BL_ISU, , RFC_To_JDBC_Async_R_SQL_bllmstest, urn:sap-com:document:sap:rfc:functions, ZTEST_TIPS_DOI1 </Trace> <Trace level="1" type="E">CL_XMS_PLSRV_OUTBINDING-ENTER_PLSRV</Trace>
please suggest me...Hi,
This is configuration issue, please check the ESR sender/Receiver interfaces and the associated
Sender / Receiver agreement and the associated communication channels are configured correctly.
Try to test the configuration using Test configuration / send a test message from RWB to this interface.
If the configuration is correct and you are facing the same issue. try to delete the ID configuration and recreate it.
Before re-creating the configuration, do cache refresh.
Regards
Bhargava Krishna -
Hi Anuj & All,
I'm trying to create an outbound scenario with EDIFACT-D96A-ORDERS. A simple SOA composite application polling data from DB and through B2B adapter 'send' option provides data to B2B system.
Set up two partner profiles like this,
Host:
Name: HTP
EDI Group ID: HTP
EDI Interchange ID: Interchange Sen
EDI Interchange ID Qualifier: 01
Remote:
Name: RTP
EDI Group ID: RTP
EDI Interchange ID: Interchange Rec
EDI Interchange ID Qualifier: 01
Other settings are as usual. Delivery channel of generic file created on RTH.
Now, few documents settings on B2B console are like this,
D96A-> Interchange tab
Create UNA: Never
ORDERS-> Transaction
Functional Group Identifier Code: ORDERS
Controlling Agency: UN
- other properties are unchanged.
On SOA side, the bpel invoke activity which calls B2B adapter has following properties:
<invoke name="InvokeOrders"
inputVariable="InvokeOrders_send_InputVariable"
partnerLink="D96A.ORDERS" portType="ns2:send_ptt"
operation="send" bpelx:invokeAsDetail="no">
<bpelx:inputProperty name="b2b.toTradingPartnerIdType"
expression="'NAME'"/>
<bpelx:inputProperty name="b2b.toTradingPartnerId"
expression="'RTP'"/>
<bpelx:inputProperty name="b2b.messageType" expression="1"/>
<bpelx:inputProperty name="b2b.messageId" variable="messageID"/>
<bpelx:inputProperty name="b2b.fromTradingPartnerIdType"
expression="'NAME'"/>
<bpelx:inputProperty name="b2b.fromTradingPartnerId"
expression="'HTP'"/>
<bpelx:inputProperty name="b2b.documentTypeName"
expression="'ORDERS'"/>
<bpelx:inputProperty name="b2b.documentProtocolVersion"
expression="'D96A'"/>
<bpelx:inputProperty name="b2b.documentProtocolName"
expression="'EDIFACT'"/>
<bpelx:inputProperty name="b2b.documentDefinitionName"
expression="'ORDERS_def'"/>
<bpelx:inputProperty name="b2b.conversationId"
variable="ConversationID"/>
</invoke>
The error I'm getting on B2B Console->Reports->Business Message, while running this is,
Error Code B2B-50547
Error Description Machine Info: (htp01310-vm01.htp.com) Description: Agreement not found for trading partners: FromTP HTP, ToTP null with document type ORDERS-D96A-OUTBOUND.
Error Level ERROR_LEVEL_COLLABORATION
Error Severity ERROR
Error Text Agreement not found for trading partners: FromTP HTP, ToTP null with document type ORDERS-D96A-OUTBOUND.
Note: On Manage Deployment Tab I've checked the agreement is in active state.
-- Business Message (Result):--
State: MSG_ERROR
Document Type: ORDERS
Agreement: <blank>
Sender: HTP
Receiver: <blank>
-- Application Message (Result):--
Sender Id Type: NAME
Sender Value: TCS
Receiver Id Type: NAME
Receiver Value: ORCL
Document Type: ORDERS
Document Definition: ORDERS_def
Document Protocol Name: EDIFACT
Document Protocol Version: D96A
Direction: OUTBOUND
State: MSG_COMPLETE
- Can anybody please shoot some pointer on how to resolve this? Please let me know if you need further configuration details which I've not mentioned here.
Regards,
- @bhijitHi Mariusz,
Thanks for your reply. Yes I think so, probably you're right. But finest trace level doesn't give much clues on "wrong mapped" data. Anyway, here is the detail log. Please don't forget to point out if you find something interesting.
#### <Error> <oracle.soa.b2b.engine> <htp01310-vm01.htp.com> <soa_server1> <Workmanager: , Version: 0, Scheduled=false, Started=false, Wait time: 0 ms
> <<anonymous>> <BEA1-0D3F5ABAC0B2E50C6CCB> <449b4b64fa2729cc:59737e36:146f08831ee:-8000-0000000000127da6> <1404379704092> <BEA-000000> <Error -: B2B-50547: Agreement not found for trading partners: FromTP HTP, ToTP null with document type ORDERS-D96A-OUTBOUND.
at oracle.tip.b2b.tpa.RepoDataAccessor.queryAgreementMO(RepoDataAccessor.java:887)
at oracle.tip.b2b.tpa.RepoDataAccessor.getAgreementDetails(RepoDataAccessor.java:415)
at oracle.tip.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:465)
at oracle.tip.b2b.tpa.TPAProcessor.processOutgoingTPA(TPAProcessor.java:224)
at oracle.tip.b2b.engine.Engine.processOutgoingMessageImpl(Engine.java:1555)
at oracle.tip.b2b.engine.Engine.processOutgoingMessage(Engine.java:819)
at oracle.tip.b2b.engine.Engine.outgoingContinueProcess(Engine.java:4100)
at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:3921)
at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:3309)
at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecutor.java:637)
at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:214)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:184)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
Error -: B2B-50547: Agreement not found for trading partners: FromTP HTP, ToTP null with document type ORDERS-D96A-OUTBOUND.
at oracle.tip.b2b.tpa.RepoDataAccessor.queryAgreementMO(RepoDataAccessor.java:887)
at oracle.tip.b2b.tpa.RepoDataAccessor.getAgreementDetails(RepoDataAccessor.java:415)
at oracle.tip.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:465)
at oracle.tip.b2b.tpa.TPAProcessor.processOutgoingTPA(TPAProcessor.java:224)
at oracle.tip.b2b.engine.Engine.processOutgoingMessageImpl(Engine.java:1555)
at oracle.tip.b2b.engine.Engine.processOutgoingMessage(Engine.java:819)
at oracle.tip.b2b.engine.Engine.outgoingContinueProcess(Engine.java:4100)
at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:3921)
at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:3309)
at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecutor.java:637)
at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:214)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:184)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
>
#### <Error> <oracle.soa.b2b.engine> <htp01310-vm01.htp.com> <soa_server1> <Workmanager: , Version: 0, Scheduled=false, Started=false, Wait time: 0 ms
> <<anonymous>> <BEA1-0D3F5ABAC0B2E50C6CCB> <449b4b64fa2729cc:59737e36:146f08831ee:-8000-0000000000127da6> <1404379704569> <BEA-000000> <Error -: B2B-50547: Agreement not found for trading partners: FromTP HTP, ToTP null with document type ORDERS-D96A-OUTBOUND.
at oracle.tip.b2b.tpa.RepoDataAccessor.queryAgreementMO(RepoDataAccessor.java:887)
at oracle.tip.b2b.tpa.RepoDataAccessor.getAgreementDetails(RepoDataAccessor.java:415)
at oracle.tip.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:465)
at oracle.tip.b2b.tpa.TPAProcessor.processOutgoingTPA(TPAProcessor.java:224)
at oracle.tip.b2b.engine.Engine.processOutgoingMessageImpl(Engine.java:1555)
at oracle.tip.b2b.engine.Engine.processOutgoingMessage(Engine.java:819)
at oracle.tip.b2b.engine.Engine.outgoingContinueProcess(Engine.java:4100)
at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:3921)
at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:3309)
at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecutor.java:637)
at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:214)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:184)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
Error -: B2B-50547: Agreement not found for trading partners: FromTP HTP, ToTP null with document type ORDERS-D96A-OUTBOUND.
at oracle.tip.b2b.tpa.RepoDataAccessor.queryAgreementMO(RepoDataAccessor.java:887)
at oracle.tip.b2b.tpa.RepoDataAccessor.getAgreementDetails(RepoDataAccessor.java:415)
at oracle.tip.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:465)
at oracle.tip.b2b.tpa.TPAProcessor.processOutgoingTPA(TPAProcessor.java:224)
at oracle.tip.b2b.engine.Engine.processOutgoingMessageImpl(Engine.java:1555)
at oracle.tip.b2b.engine.Engine.processOutgoingMessage(Engine.java:819)
at oracle.tip.b2b.engine.Engine.outgoingContinueProcess(Engine.java:4100)
at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:3921)
at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:3309)
at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecutor.java:637)
at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:214)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:184)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
>
Rgds,
- Abhijit
P.S. - Can you please check what is the value of "Functional Group Identifier Code" for D96A ORDERS. -
TP Agreement Not Found -- OAGIS XML document over AS2
Hi,
I am getting TP Agreement not found error while receiving OAGIS XML document over AS2. Below is error message.
Agreement not found for trading partners: FromTP SOALocal, ToTP Powell with document type PROCESS_INVOICE_002-null-INBOUND
I am not sure why it says null-INBOUND. It appears like it is not able to identify Document Version. DOCTYPE_REVISION=7.2.1 is being passed in the AS2 transport headers but still it does not recognize the version.
I am not sure what is missing. Please give some ideas hints.
Below is the Business Message:----
Id AC12149513F1F78141400000E7DEDE00
Message Id AC12149513F1F78136200000E7DED800
Refer To Message Refer To Message
Sender Type AS2 Identifier
Sender Value SOALocal
Receiver Type AS2 Identifier
Receiver Value PowellIndustries
Sender SOALocal
Receiver Powell
Agreement Id
Agreement
Document Type PROCESS_INVOICE_002
Document Protocol OAG
Document Version 7.2.1
Message Type REQ
Direction INBOUND
State MSG_ERROR
Acknowledgement Mode NONE
Response Mode ASYNC
Send Time Stamp 06/07/2013 11:28:49 AM
Receive Time Stamp 06/07/2013 11:28:50 AM
Document Retry Interval(Channel) 0
Document Remaining Retry(Channel) 0
Document Retry Interval(Agreement)
Document Remaining Retry(Agreement)
Native Message Size 10788
Translated Message Size
Business Action Name
Business Transaction Name
Xpath Name1
Xpath Value1
Xpath Expression1
Xpath Name2
Xpath Value2
Xpath Expression2
Xpath Name3
Xpath Value3
Xpath Expression3
Correlation From XPath Name
Correlation From XPath Value
Correlation From XPath Expression
Correlation To XPath Name
Correlation To XPath Value
Correlation To XPath Expression
Wire Message Wire Message
Application Message Application Message
Payload Storage Payload Storage
Attachment Attachment
Label
Collaboration Id AC12149513F1F7813BF00000E7DEDB00
Collabration Name
Collabration Version
Business Action Name
Exchange Protocol Name AS2
Exchange Protocol Version 1.1
Interchange Control Number
Group Control Number
Transaction Set Control Number
Error Code B2B-50547
Error Description Machine Info: (pwl.pri) Agreement not found for trading partners: FromTP SOALocal, ToTP Powell with document type PROCESS_INVOICE_002-null-INBOUND.
Error Level ERROR_LEVEL_COLLABORATION
Error Severity ERROR
Error Text Agreement not found for trading partners: FromTP SOALocal, ToTP Powell with document type PROCESS_INVOICE_002-null-INBOUND.
Below is the Wire Message:----
Id AC12149513F1F78115400000E7DED600
Message Id AC12149513F1F78115400000E7DED600
Business Message AC12149513F1F78141400000E7DEDE00
Packed Message Packed Message
Payload Payload
Protocol Message Id <38383939373331343630313931303737@SOALocal>
Refer To Protocol Message Id
Protocol Collaboration Id
Protocol Transport Binding ChannelName=SOALocal dcID=CHANNEL_nlzbB-7511847722850817684 AS2-To=PowellIndustries DOCTYPE_NAME=PROCESS_INVOICE_002 TE=trailers, deflate, gzip, compress DOCTYPE_REVISION=7.2.1 Date=Fri, 07 Jun 2013 16:28:49 GMT AS2-Version=1.1 Accept-Encoding=gzip, x-gzip, compress, x-compress AS2-From=SOALocal url=http://pwl.pri/b2b/transportServlet Content-Transfer-Encoding=binary Message-ID=<38383939373331343630313931303737@SOALocal> Content-type=application/pkcs7-mime; smime-type="enveloped-data" MSG_RECEIVED_TIME=Fri Jun 07 11:28:49 CDT 2013 ECID-Context=1.71b9d2a41e5aaef0:-10db6371:13f1ee6cb74:-8000-000000000000276d;khvE MIME-version=1.0 tpName=PowellIndustries User-Agent=AS2 Server Oracle HTTPClient Version 10h Content-Length=13663 Host=pwl.pri:8001 Connection=close, TE useProxy=false From=SOALocal additionalHeaders=DOCTYPE_NAME=PROCESS_INVOICE_002#DOCTYPE_REVISION=7.2.1
Message Digest Message Digest
Digest Algorithm md5
Transport Protocol HTTP
Transport Protocol Version 1.1
Url http://pwl.pri:8001/b2b/transportServlet
security
Transport Headers ChannelName=SOALocal dcID=CHANNEL_nlzbB-7511847722850817684 AS2-To=PowellIndustries DOCTYPE_NAME=PROCESS_INVOICE_002 TE=trailers, deflate, gzip, compress DOCTYPE_REVISION=7.2.1 Date=Fri, 07 Jun 2013 16:28:49 GMT AS2-Version=1.1 Accept-Encoding=gzip, x-gzip, compress, x-compress AS2-From=SOALocal url=http://pwl.pri:8001/b2b/transportServlet Content-Transfer-Encoding=binary Message-ID=<38383939373331343630313931303737@SOALocal> Content-type=application/pkcs7-mime; smime-type="enveloped-data" MSG_RECEIVED_TIME=Fri Jun 07 11:28:49 CDT 2013 ECID-Context=1.71b9d2a41e5aaef0:-10db6371:13f1ee6cb74:-8000-000000000000276d;khvE MIME-version=1.0 tpName=PowellIndustries User-Agent=AS2 Server Oracle HTTPClient Version 10h Content-Length=13663 Host=pwl.pri:8001 Connection=close, TE useProxy=false From=SOALocal additionalHeaders=DOCTYPE_NAME=PROCESS_INVOICE_002#DOCTYPE_REVISION=7.2.1
certificates certificates
State ERROR
Reattempt Count
Error Code B2B-50547
Error Description Machine Info: (pwl.pri) Agreement not found for trading partners: FromTP SOALocal, ToTP Powell with document type PROCESS_INVOICE_002-null-INBOUND.
Error Text Agreement not found for trading partners: FromTP SOALocal, ToTP Powell with document type PROCESS_INVOICE_002-null-INBOUND.
exchangeRetryInterval
exchangeRemainingRetry
Message Size 10788
Thanks
Ismail M.Hi Anuj,
Here is the payload from the wire message. We are using 11.1.1.6.0
<?xml version = '1.0' encoding = 'UTF-8'?>
<PROCESS_INVOICE_002 xmlns="http://www.openapplications.org/171_process_invoice_002">
<CNTROLAREA xmlns="">
<BSR>
<VERB value="PROCESS">PROCESS</VERB>
<NOUN value="INVOICE">INVOICE</NOUN>
<REVISION value="002">002</REVISION>
</BSR>
<SENDER>
<LOGICALID>POWELLIND</LOGICALID>
<COMPONENT>B2B</COMPONENT>
<TASK/>
<REFERENCEID/>
<CONFIRMATION>0</CONFIRMATION>
<LANGUAGE>ENG</LANGUAGE>
<CODEPAGE/>
<AUTHID>oracle B2B</AUTHID>
</SENDER>
<DATETIME qualifier="CREATION">
<YEAR/>
<MONTH/>
<DAY/>
<HOUR/>
<MINUTE/>
<SECOND/>
<SUBSECOND/>
<TIMEZONE/>
</DATETIME>
</CNTROLAREA>
<DATAAREA xmlns="">
<PROCESS_INVOICE>
<INVHEADER>
<AMOUNT qualifier="DOCUMENT" type="T" index="1">
<VALUE>5413</VALUE>
<NUMOFDEC>2</NUMOFDEC>
<SIGN>+</SIGN>
<CURRENCY>USD</CURRENCY>
<DRCR>D</DRCR>
</AMOUNT>
<DATETIME qualifier="DOCUMENT" index="1">
<YEAR>2013</YEAR>
<MONTH>03</MONTH>
<DAY>15</DAY>
<HOUR>00</HOUR>
<MINUTE>00</MINUTE>
<SECOND>00</SECOND>
<SUBSECOND>0000</SUBSECOND>
<TIMEZONE>-0500</TIMEZONE>
</DATETIME>
<DOCUMENTID>1000182</DOCUMENTID>
<DESCRIPTN/>
<DOCTYPE/>
<PAYMETHOD/>
<REASONCODE/>
<USERAREA/>
<PARTNER>
<NAME index="1">Powell US Operating Unit</NAME>
<ONETIME/>
<PARTNRID/>
<PARTNRTYPE>Supplier</PARTNRTYPE>
<SYNCIND/>
<ACTIVE/>
<CURRENCY/>
<DESCRIPTN/>
<DUNSNUMBER/>
<GLENTITYS/>
<NAME index="1">Powell US Operating Unit</NAME>
<PARENTID/>
<PARTNRIDX/>
<PARTNRRATG/>
<PARTNRROLE/>
<PAYMETHOD/>
<TAXEXEMPT/>
<TAXID/>
<TERMID/>
<USERAREA/>
<CONTACT>
<NAME index="1">No Sales Credit</NAME>
<CONTCTTYPE/>
<DESCRIPTN/>
<EMAIL/>
<FAX index="1"/>
<TELEPHONE index="1"/>
<USERAREA/>
</CONTACT>
</PARTNER>
<PARTNER>
<NAME index="1">PO Box 843823, Dallas, Dallas, TX, 75284-3823, United States</NAME>
<ONETIME/>
<PARTNRID/>
<PARTNRTYPE>RemitTo</PARTNRTYPE>
<SYNCIND/>
<ACTIVE/>
<CURRENCY/>
<DESCRIPTN/>
<DUNSNUMBER/>
<GLENTITYS/>
<NAME index="1">PO Box 843823, Dallas, Dallas, TX, 75284-3823, United States</NAME>
<PARENTID/>
<PARTNRIDX/>
<PARTNRRATG/>
<PARTNRROLE/>
<PAYMETHOD/>
<TAXEXEMPT/>
<TAXID/>
<TERMID/>
<USERAREA/>
<ADDRESS>
<ADDRLINE index="1">PO Box 843823</ADDRLINE>
<ADDRTYPE/>
<CITY>Dallas</CITY>
<COUNTRY>United States</COUNTRY>
<COUNTY>Dallas</COUNTY>
<DESCRIPTN/>
<FAX index="1"/>
<POSTALCODE/>
<REGION/>
<STATEPROVN>TX</STATEPROVN>
<TAXJRSDCTN/>
<TELEPHONE index="1"/>
<URL/>
<USERAREA/>
</ADDRESS>
<CONTACT>
<NAME index="1"/>
<CONTCTTYPE/>
<DESCRIPTN/>
<EMAIL/>
<FAX index="1"/>
<TELEPHONE index="1"/>
<USERAREA/>
</CONTACT>
</PARTNER>
<PARTNER>
<NAME index="1"/>
<ONETIME/>
<PARTNRID/>
<PARTNRTYPE>Carrier</PARTNRTYPE>
<SYNCIND/>
<ACTIVE/>
<CURRENCY/>
<DESCRIPTN/>
<DUNSNUMBER/>
<GLENTITYS/>
<NAME index="1"/>
<PARENTID/>
<PARTNRIDX/>
<PARTNRRATG/>
<PARTNRROLE/>
<PAYMETHOD/>
<TAXEXEMPT/>
<TAXID/>
<TERMID/>
<USERAREA/>
<ADDRESS>
<ADDRLINE index="1"/>
<ADDRTYPE/>
<CITY/>
<COUNTRY/>
<COUNTY/>
<DESCRIPTN/>
<FAX index="1"/>
<POSTALCODE/>
<REGION/>
<STATEPROVN/>
<TAXJRSDCTN/>
<TELEPHONE index="1"/>
<URL/>
<USERAREA/>
</ADDRESS>
<CONTACT>
<NAME index="1"/>
<CONTCTTYPE/>
<DESCRIPTN/>
<EMAIL/>
<FAX index="1"/>
<TELEPHONE index="1"/>
<USERAREA/>
</CONTACT>
</PARTNER>
<DOCUMNTREF>
<DOCTYPE>INV</DOCTYPE>
<DOCUMENTID>10005:21009</DOCUMENTID>
<PARTNRID/>
<PARTNRTYPE>Supplier</PARTNRTYPE>
<DESCRIPTN/>
<DOCUMENTRV/>
<LINENUM/>
<NOTES index="1"/>
<SCHLINENUM/>
<SUBLINENUM/>
<USERAREA/>
</DOCUMNTREF>
<INVTAX>
<AMOUNT qualifier="TAX" type="T" index="1">
<VALUE>413</VALUE>
<NUMOFDEC>2</NUMOFDEC>
<SIGN>+</SIGN>
<CURRENCY>USD</CURRENCY>
<DRCR>D</DRCR>
</AMOUNT>
<AMOUNT qualifier="TAXBASE" type="T" index="1">
<VALUE>5413</VALUE>
<NUMOFDEC>2</NUMOFDEC>
<SIGN>+</SIGN>
<CURRENCY>USD</CURRENCY>
<DRCR>D</DRCR>
</AMOUNT>
<QUANTITY qualifier="PERCENT">
<VALUE/>
<NUMOFDEC/>
<SIGN/>
<UOM/>
</QUANTITY>
<DESCRIPTN/>
<LINENUM/>
<TAXCODE/>
<TAXJRSDCTN/>
<USERAREA/>
</INVTAX>
<PYMTTERM>
<AMOUNT qualifier="DISCNT" type="T" index="1">
<VALUE/>
<NUMOFDEC/>
<SIGN/>
<CURRENCY/>
<DRCR/>
</AMOUNT>
<DATETIME qualifier="DISCNT" index="1">
<YEAR/>
<MONTH/>
<DAY/>
<HOUR/>
<MINUTE/>
<SECOND/>
<SUBSECOND/>
<TIMEZONE/>
</DATETIME>
<DATETIME qualifier="DUE" index="1">
<YEAR>2013</YEAR>
<MONTH>04</MONTH>
<DAY>14</DAY>
<HOUR>00</HOUR>
<MINUTE>00</MINUTE>
<SECOND>00</SECOND>
<SUBSECOND>0000</SUBSECOND>
<TIMEZONE>-0500</TIMEZONE>
</DATETIME>
<DATETIME qualifier="PYMTTERM" index="1">
<YEAR>1952</YEAR>
<MONTH>01</MONTH>
<DAY>01</DAY>
<HOUR>00</HOUR>
<MINUTE>00</MINUTE>
<SECOND>00</SECOND>
<SUBSECOND>0000</SUBSECOND>
<TIMEZONE>-0600</TIMEZONE>
</DATETIME>
<DESCRIPTN>Net Due in 30 Days</DESCRIPTN>
<TERMID>30 NET</TERMID>
<USERAREA>
<AMOUNT qualifier="TOTAL" type="T" index="1">
<VALUE>5413</VALUE>
<NUMOFDEC>2</NUMOFDEC>
<SIGN>+</SIGN>
<CURRENCY/>
<DRCR>D</DRCR>
</AMOUNT>
</USERAREA>
</PYMTTERM>
</INVHEADER>
<INVLINE>
<AMOUNT qualifier="EXTENDED" type="T" index="1">
<VALUE>50</VALUE>
<NUMOFDEC/>
<SIGN>+</SIGN>
<CURRENCY/>
<DRCR>D</DRCR>
</AMOUNT>
<OPERAMT qualifier="UNIT" type="T">
<VALUE>5</VALUE>
<NUMOFDEC/>
<SIGN>+</SIGN>
<CURRENCY/>
<UOMVALUE>1</UOMVALUE>
<UOMNUMDEC>0</UOMNUMDEC>
<UOM/>
</OPERAMT>
<QUANTITY qualifier="ITEM">
<VALUE>10</VALUE>
<NUMOFDEC/>
<SIGN>+</SIGN>
<UOM/>
</QUANTITY>
<LINENUM>1</LINENUM>
<DESCRIPTN>11GA SHEET STEEL HOT ROLLED-PICKLED-OILED COMMERCIAL QUALITY.</DESCRIPTN>
<ITEM>11GA SHEET STEEL HOT ROLLED-PICKLED-OILED COMMERCIAL QUALITY.</ITEM>
<ITEMTYPE/>
<ITEMX>11HRPO</ITEMX>
<OPENITEM/>
<PROJACTVTY/>
<UNIT>LB</UNIT>
<UPC/>
<USERAREA/>
<DOCUMNTREF>
<DOCTYPE>LINE</DOCTYPE>
<DOCUMENTID>10005:21009:19019</DOCUMENTID>
<PARTNRID/>
<PARTNRTYPE>Supplier</PARTNRTYPE>
<DESCRIPTN/>
<USERAREA/>
</DOCUMNTREF>
<DOCUMNTREF>
<DOCTYPE>SalesOrder</DOCTYPE>
<DOCUMENTID>600813</DOCUMENTID>
<PARTNRID/>
<PARTNRTYPE/>
<DESCRIPTN/>
<USERAREA/>
</DOCUMNTREF>
<DOCUMNTREF>
<DOCTYPE>PurchaseOrder</DOCTYPE>
<DOCUMENTID>TEST123</DOCUMENTID>
<PARTNRID>N/A</PARTNRID>
<PARTNRTYPE>Customer</PARTNRTYPE>
<DESCRIPTN/>
<DOCUMENTRV/>
<LINENUM/>
<SCHLINENUM/>
</DOCUMNTREF>
</INVLINE>
</PROCESS_INVOICE>
</DATAAREA>
</PROCESS_INVOICE_002> -
Dear Friends,
Getting error when cloning 11.5.9 from PROD to DEV:
ERROR: OUI files not found at their expected location. Please make sure that the pre-requisit OUI patch was applied correctly: patch should be unzipped directly at the ORACLE_HOME root level so that
<iAS ORACLE_HOME>/oui21/oui/lib/OraInstaller.jar exists.
Restart adclone.pl after performing required corrections.
I applied the patch 5035661 also but still the error exists.
Please let me know the fix.
[appldev@betestoracle bin]$ perl adcfgclone.pl appsTier
First Creating a new context file for the cloned system.
The program is going to ask you for information about the new system:
Enter the values for the new APPL_TOP Context:
Does the target system have more than one application tier server node (y/n) [n] ?:
Is the target system APPL_TOP divided into multiple mount points (y/n) [n] ?:
Target system APPL_TOP mount point [apps/applprod/prodappl]:/apps/DEV/devappl
Target system COMMON_TOP directory [apps/applprod/prodcomn]:/apps/DEV/devcomn
Location of JDK 1.3.1 on the target system [usr/java/jdk1.3.1_10]:
The new context file has to contain port numbers related to target system.
Do you want to preserve the port values from the source system on the target system (y/n) [y] ?:n
Clone Context uses the same port pool mechanism as the Rapid Install
Once you choose a port pool, Clone Context will validate the port availability.
Enter the port pool number:[0-99]
50
Checking the port pool 50
done: Port Pool 50 is free
Web Listener port is 8050
Complete port information available at /apps/DEV/devappl/admin/out/PROD_betestoracle/portpool.lst
Backing up /apps/DEV/devappl/admin/PROD_betestoracle.xml to /apps/DEV/devappl/admin/PROD_betestoracle.xml7.bak
Creating the new APPL_TOP Context file from :
/apps/DEV/devappl/ad/11.5.0/admin/template/adxmlctx.tmp
The new APPL_TOP context file has been created :
/apps/DEV/devappl/admin/PROD_betestoracle.xml
Log file located at /tmp/CloneContext_05131045.log
Please enter the APPS password:
apps
Running Rapid Clone with command:
perl ./adclone.pl java=/apps/DEV/devcomn/util/jre/1.1.8 mode=apply stage=/apps/DEV/devcomn/clone component=appsTier method=CUSTOM appctxtg=/apps/DEV/devappl/admin/PROD_betestoracle.xml
ERROR: OUI files not found at their expected location. Please make sure that the pre-requisit OUI patch was applied correctly: patch should be unzipped directly at the ORACLE_HOME root level so that
<iAS ORACLE_HOME>/oui21/oui/lib/OraInstaller.jar exists.
Restart adclone.pl after performing required corrections.
Starting application Services for PROD:
Running:
/apps/DEV/devcomn/admin/scripts/PROD_betestoracle/adstrtal.sh APPS/<appspwd>
Regards,
DBERROR: OUI files not found at their expected location.Please see these docs.
Troubleshooting RapidClone issues with Oracle Applications R12 [ID 603104.1] -- adcfgclone.pl appsTier fails with "ERROR: OUI files not found at their expected location"
Preclone DBtier Fails: Error: Oui Files Not Found [ID 739589.1]
Troubleshooting Guide and Known Issues List for the Oracle Application Management Pack for Oracle E-Business Suite [ID 812294.1]
Application Management Pack for Oracle E-Business Suite Release 2.0.x Troubleshooting Guide [ID 412044.1]
Thanks,
Hussein -
Trading Partner Agreement Not found error in EDI EDIFACT Scenario
Hello all,
I am getting the following error in the trace file in the EDI EDIFACT over Generic Exchange Scenario,i have verified the agreement effective to date,i also have checked the enq_orders.properties & enq_ordrsp.properties on both the servers and the FromParty Name and ToParty Name are shown correctly.so where does the actual problem occur can anyone plz help me out to solve this issue.
MsgID = C0A8010111EF3AC936E0000068CB7800
ReplyToMsgID = null
FromParty = Acme
ToParty = Acme
EventName = Exception
DoctypeName = Exception
DoctypeRevision = 1.0
MsgType = 3
payload length = 1820
*<Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">*
*<correlationId>null</correlationId>*
*<b2bMessageId>C0A8010111EF3AC936E0000068CB7800</b2bMessageId>*
*<errorCode>AIP-50547</errorCode>*
*<errorText>Trading partner agreement not found for the given input values: From partyNAME "Acme", To partyNAME "Acme", Business action name "Process_ORDERS"; also verify agreement effectiveToDate</errorText>*
*<errorDescription>*
*<![CDATA[Machine Info: (mcity94)*
*Description: Unable to identify the trading partner agreement from the given input values. Also verify agreement effectiveToDate*
*StackTrace:*
*Error -: AIP-50547: Trading partner agreement not found for the given input values: From party[NAME|http://forums.oracle.com/forums/] "Acme", To partyNAME "Acme", Business action name "Process_ORDERS"; also verify agreement effectiveToDate*
** at oracle.tip.adapter.b2b.tpa.RepoDataAccessor.getAgreementNameByBaTPName(RepoDataAccessor.java:2225)**
** at oracle.tip.adapter.b2b.tpa.TPAIdentifier.identifyTPA(TPAIdentifier.java:181)**
** at oracle.tip.adapter.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:511)**
** at oracle.tip.adapter.b2b.tpa.TPAProcessor.processIncomingTPA(TPAProcessor.java:229)**
** at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1715)**
** at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:2404)**
** at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:2303)**
** at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:2258)**
** at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:500)**
** at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:348)**
** at java.lang.Thread.run(Thread.java:534)**
*]]>*
*</errorDescription>*
*<errorSeverity>2</errorSeverity>*
*</Exception>*
Thanx
Sunny
Edited by: sunny kay on Jan 20, 2009 7:45 AMHi
Since the error states "Process_ORDERS" as the Business action I assume you are trying to enq the ORDERS document from Acme to GlobalChips. The issue then would be due to the fact that there is a trailing space character after the GlobalChips
Please check for a space (or spaces) after
to = GlobalChips
Also ensure that the UI has the trading partner with the same spelling ie. GlobalChips and not Globalchips
Thanks,
--Arun -
Trading partner agreement not found
Hi,
Can anyone help me resolving the below error:
Trading partner agreement not found for the given input values: From party[TYPE-VALUE] "Generic Identifier-10.22.110.110", To party[TYPE-VALUE] "Generic Identifier-*.*.*.*", Business action name "PRC_EDI_X12_850_4010"; also verify agreement effectiveToDate
I am trying to submit an EDI 850 document to the b2b/transportServlet through a client program. The business protocol I am using is EDI X12 over Generic Exchange (HTTP 1.1).
Thanks.Hi,
Thanks when I put the actual IP addresses it worked. Now I have few questions, it would be great help if you could answer them.
1. The machine where B2B Integration is installed has been assigned with multiple IP addresses. Only the first two set of numbers are same and the last two numbers are different. For example : 10.90.12.80, 10.90.18.22. Therefore for the host partner if I need to assign the Generic Identifier which IP do I need to choose? Also which IP I should be using for the Transport Server?
2. I want to accept all the cXML ORDER messages sent by all trading partners(TP) to resolve one TP in B2B Integration. We are going to lookup the TP in our BPEL process, so we only need the B2B integration to validate the document sent in . Therefore all the four subnets in the IP address may vary. In this case I cannot use a IP address therefore how can I specify the Generic Identifier? Or is there any different method I can use?
3. I receive my cXML punchout from my trading partners from different countries, for example say Italy and France. The trading partner id is same but the country from where the punchout originated is different. I don’t have any other field in the message to determine which country the order originated from but I need to figure out the country code some how. In current implementation we have different URL for each country to resolve the country code. How can I do this in B2B Integration tool?
4. Is there a way to Dynamically change the URL that a Delivery channel is supposed to send to? If a customer changes the URL that a document is supposed to go to, can we change this on the fly? -
AIP-50547: Trading partner agreement not found for the given input values
I am trying to setup outbound 810. I have it working in one environment I took export and imported in another environment. But it gave me following error. I purged repository and configured everything again and it still gives me same error:
2007.08.25 at 19:41:20:997: Thread-21: B2B - (DEBUG) RepoDataAccessor:getAgreementIdByBaTPName() SELECT ag.agreementid FROM TIP_BusinessAction_ra ba1, TIP_Party_ra tp1, TIP_BusinessAction_ra ba2, TIP_Party_ra tp2, TIP_SupportedBusinessAction_ra sba1, TIP_SupportedBusinessAction_ra sba2, TIP_Participant_ra tpp1, TIP_Participant_ra tpp2, TIP_Agreement_ra ag WHERE tp1.name = ? AND ba1.name = ? AND sba1.isinitiator = ? AND tpp1.agreement = ag.ID AND tpp1.supportedbusinessaction = sba1.ID AND sba1.tradingpartner = tp1.ID AND sba1.businessaction = ba1.ID AND tp2.name = ? AND ba2.name = ? AND sba2.isinitiator = ? AND tpp2.agreement = ag.ID AND tpp2.supportedbusinessaction = sba2.ID AND sba2.tradingpartner = tp2.ID AND sba2.businessaction = ba2.ID AND tpp1.agreement = tpp2.agreement AND ((ag.effectivefromdate <= SYSDATE) OR (ag.effectivefromdate IS NULL)) AND ((ag.effectivetodate +1 >= SYSDATE) OR (ag.effectivetodate IS NULL))
2007.08.25 at 19:41:20:997: Thread-21: B2B - (DEBUG) RepoDataAccessor:getAgreementIdByBaTPName() bind vars: RSC,SEND_INVOICE,Y,PETSMART ,SEND_INVOICE,N
2007.08.25 at 19:41:22:854: Thread-21: B2B - (ERROR) Error -: AIP-50547: Trading partner agreement not found for the given input values: From party[NAME] "RSC", To party[NAME] "PETSMART ", Business action name "SEND_INVOICE"; also verify agreement effectiveToDate
at oracle.tip.adapter.b2b.tpa.RepoDataAccessor.getAgreementIdByBaTPName(RepoDataAccessor.java:1977)
at oracle.tip.adapter.b2b.tpa.TPAIdentifier.identifyTPA(TPAIdentifier.java:166)
at oracle.tip.adapter.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:389)
at oracle.tip.adapter.b2b.tpa.TPAProcessor.processOutgoingTPA(TPAProcessor.java:192)
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:731)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:531)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:344)
at java.lang.Thread.run(Thread.java:534)
I took SQL from the log and used the parameter in the log and executed query at sql prompt and it finds agreement id see below.
SQL> SELECT ag.agreementid FROM TIP_BusinessAction_ra ba1, TIP_Party_ra tp1, TIP_BusinessAction_ra ba2, TIP_Party_ra tp2, TIP_SupportedBusinessAction_ra sba1, TIP_SupportedBusinessAction_ra sba2, TIP_Participant_ra tpp1, TIP_Participant_ra tpp2, TIP_Agreement_ra ag WHERE tp1.name = 'RSC' AND ba1.name = 'SEND_INVOICE' AND sba1.isinitiator = 'Y' AND tpp1.agreement = ag.ID AND tpp1.supportedbusinessaction = sba1.ID AND sba1.tradingpartner = tp1.ID AND sba1.businessaction = ba1.ID AND tp2.name = 'PETSMART' AND ba2.name = 'SEND_INVOICE' AND sba2.isinitiator = 'N' AND tpp2.agreement = ag.ID AND tpp2.supportedbusinessaction = sba2.ID AND sba2.tradingpartner = tp2.ID AND sba2.businessaction = ba2.ID AND tpp1.agreement = tpp2.agreement AND ((ag.effectivefromdate <= SYSDATE) OR (ag.effectivefromdate IS NULL)) AND ((ag.effectivetodate +1 >= SYSDATE) OR (ag.effectivetodate IS NULL));
AGREEMENTID
100Hello Mr Desai,
Few question and pointers.
1. Are these two environments pointing to the same repository. Please ensure the system date is appropriate.
2. Please point your second environment to the Repository of the first environment and check. This will give us some data point.
3. Make sure the agreement is deployed in your new environment and active. I assume you are importing the agreement on a clean repository.
4. Please send us the export and payload file for analysis
Rgds,
Ramesh
4. -
Custom Documents INBOUND FileChannel : Agreement not found
Hello Gurus
Version is 11.1.1.3
1) I have setup an INBOUND Agreemnt between ACME and GC on Host GC i.e direction of the message is ACME->GC
Message Exchange is INBOUND FromTP=ACME, ToTP=GC, DOCTYPE=MAK, DOCTYPE_REVISION=3.5
2) I have setup a "Generic File1.0" based listening channel and I have given the following Transport Protocol Parameters
Folder name=/inbound
FileName Format=%FROM_PARTY%_%TO_PARTY%_%DOCTYPE_NAME%_%DOCTYPE_REVISION%
3) I have copied a with the following name into /inbound directory
ACME_GC_MAK_3.5
3) in the diagnostic logs it shows the following
tI,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] [[
Protocol = File
Version = 1.0
Transport Header
filename:.ACME_GC_MAK_3.5.swp
filesize:4096
filename_format:%FROM_PARTY%_%TO_PARTY%_%DOCTYPE_NAME%_%DOCTYPE_REVISION%
file_ext:swp
fullpath:/inbound/.ACME_GC_MAK_3.5.swp
timestamp:2011-07-14T01:09:18.000-05:00
for some reason it is prefixing the filename with a dot symbol
and further analysis I noticed the following
tm,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] TPAProcessor: processTPA(): party info [[
initial : null
from : TPName: null Type: null Value: null
to : TPName: GC Type: null Value: null
final : null
and finally I have noticed
anager$WorkWithListener@15ce301d,10,Application Daemon Threads])--SELECT ID, DOC_ROUTING_ID, ATTRIBUTE1, DOCTYPE_NAME, ATTRIBUTE3, FROM_DC, ATTRIBUTE5, CREATED, USER_NAME, LABEL, DIRECTION, LABEL_DESC, DOC_DEF_TIMESTAMP, MODIFIED, DOC_PROTOCOL_VERSION, RECEIVER_NAME, ATTRIBUTE2, SENDER_NAME, BUSINESS_ACTION_NAME, SERVICE_NAME, DOC_DEF_NAME, SERVICE_TYPE, DOC_REF_NAME, STATE, DEFINITION_MO, TO_DC, ATTRIBUTE4, TPA_NAME, DOC_PROTOCOL_NAME, TPA_REFERENCE, CONTROL_NUMBER_SET FROM B2B_LIFECYCLE WHERE ((SENDER_NAME IS NULL) AND ((RECEIVER_NAME = ?) AND ((DOCTYPE_NAME = ?) AND ((DOC_PROTOCOL_VERSION = ?) AND ((DIRECTION = ?) AND (STATE = ?))))))[[
bind => [GC, MAK, 3.5, INBOUND, Active]
it is trying to assume that the SENDER is NULL.
I think the rootcause is the prefixed dot symbol.
Finanly I get an error "Agreement not found for trading partners: FromTP null, ToTP GC with document type MAK-3.5-INBOUND"
Please HelpI got it working ... but I had to specify the filename format as %TO_PARTY%_%DOCTYPE_NAME%_%FROM_PARTY%_%DOCTYPE_REVISION%.dat
Maybe you are looking for
-
When i crop a video using FCE, how can i export just the selection?
When using the cropping tool with FCE 4, say i just crop out a single square from near the top of the video. if i were to export this video now, the new video would consist of the cropped out selection surrounded by black. is there anyway i can expor
-
Itunes purchased to removable hard drive
As I have a laptop, the laptop has become slow due to my purchased being stored on it. I have a removable hard drive, so is there a way I can move my purchased to the removable hard drive and also to set-up itunes to automatically save future purchas
-
How to use FT using only Apple ID?
Hello, I want to use FT (and also iMessage) using only my Apple ID, but when i try to activate it does not allow to do only with Apple ID and it forces me to use my phone number as well (my current operator does not support FaceTime). Quiero usar FT
-
Problems since being changed to ADSL2
I was changed over by BT to ADSL2 and my speed increased but I started getting regular disconnections. Having reported this to BT over a month ago I still have no resolution to this issue. Even had to take day off for Openreach engineer to visit who
-
I'm creating a grant application in forms central. In the budget there are fields, where the applicant needs to fill the "label" meaning they need to customize it to their needs in addition to including an answer. I need it so applicants can fill l