Error sending emails to Internet: Failed to connect. Winsock error code: 10051

Our exchange 2013 CU2 (CAS+MBX, Win2012) was sending emails to Internet using another server (a kerio email server) and outbound internet email was working as expected.
We have now removed the Kerio server, I also removed the kerio_Send_Connector I was using to send emails to internet and I also changed the email domain in Exchange to be authoritative. I created a new Internet send connector with default values, but the same
bad behavior is present.
Our Exchange 2013 receives emails internally and externally with no problems. The problems are sending emails to Internet. I am suspecting something in the firewall but i need to do some more research.
If from the same Exchange server I telnet to an Internet email host:25 I do get the smtp banner but as soon as I start typing HELO/EHLO I get disconnected and errors are logged.
Errors when sending emails to any emails address (this is from an email sent to google, all others are the same):
Remote Server at aspmx3.googlemail.com (74.125.136.26) returned '400 4.4.7 Message delayed'
7/1/14 9:52:44 a. m. - Remote Server at aspmx3.googlemail.com (74.125.136.26) returned '441 4.4.1 Error encountered while communicating with primary target IP address: "Failed to connect. Winsock error code: 10051, Win32 error code: 10051." Attempted
failover to alternate host, but that did not succeed. Either there are no alternate hosts, or delivery failed to all alternate hosts. The last endpoint attempted was 74.125.136.26:25'
I cannot find any references from such Winsock error that are related to Exchange 2013.
So far all email is being queued at the Exchange Server 2013. I am afraid to install CU3 and make things worse.
Thanks for your comments.

Just check if the receive connector settings are set to fine
check the send connector properties and see whether it is set to use DNS to route emails through external DNS/Internal DNS or smart host .
Do a telnet to external domain like hotmail,yahoo and see at what transaction you are getting an error
Enable verbose logging, restart the transport service and check if you get the same error in the verbose logs as well
Get in touch with the ISP and see if the port 25 for Outbound SMTP is opened.
YOu can check if SMTP Proxy is enabled in the firewall. If so disable the SMTP proxy in the firewall and check.
Good Luck!!
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question.
That will encourage me - and others - to take time out to help you.
Regards,
Sathish

Similar Messages

Failure sending mail: The transport failed to connect to the server.

Hi I have created Emailsubscription first time in my production server ,am facing this issue ,subscription were not created ,its shows me the follwing error.We did everything fine.
HI I have Configured Configuration settings properly ,
I have did the sMTP settings correctly,
I have facing this error since a long while.
Failure sending mail: The transport failed to connect to the server.
In my log file i have found these are the errors and warnings.
1.library!DefaultDomain!3738!04/23/2015-12:28:38:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file.
2.library!DefaultDomain!3738!04/23/2015-12:28:38:: w WARN: Initializing UrlRoot to default value of '' because it was incorrectly specified in Configuration file as ''.
3.notification!WindowsService_2!2898!04/23/2015-12:39:29:: e ERROR: Error occured processing subscription 3efe998d-0c40-460e-bc13-00f6c8d0a7f8: Failure sending mail: The transport failed to connect to the server.
4.emailextension!WindowsService_2!2898!04/23/2015-12:39:29:: e ERROR: Error sending email. System.Runtime.InteropServices.COMException (0x80040213): The transport failed to connect to the server.
5. library!ReportServer_0-4!2368!04/23/2015-12:52:30:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedNativeModeException: , Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedNativeModeException:
This operation is not supported on a report server that runs in native mode.;
6.extensionfactory!ReportManager_0-3!1224!04/23/2015-12:52:31:: w WARN: The extension Report Server Email does not have a LocalizedNameAttribute.
7.library!ReportServer_0-2!331c!04/23/2015-12:25:41:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedNativeModeException: , Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedNativeModeException:
This operation is not supported on a report server that runs in native mode.;
please go through this errors and give me the right soluction to this..
Awaitng for your reply's

Hi Ychinnari,
According to your description, the subscription is failed to send an email with error “Failure sending mail: The transport failed to connect to the server.”.
In your scenario, though you have mentioned you have configured the SMTP and E-mail delivery correctly, please also check those settings according to official documents below to avoid small mistakes:
How to: Configure a Report Server for E-mail Delivery (Reporting Services Configuration)
How to Use Telnet to Test SMTP Communication
Also please check if you have specified the correct E-mail Settings in Report Server Configuration Manager refer to this article:
E-mail Settings - Configuration Manager (SSRS Native Mode).
Finally, please check if you have installed an antivirus on the SSRS server. And check if any firewall role blocks the connection between report server and SMTP.
Reference:
Failure sending mail: The transport failed to connect to the server
SCOM: Report Subscription “Failure sending mail: The transport failed to connect to the server”
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Unable to open PWA in browser and MSP on application server in project server 2007. ERROR: Sending the Soap message failed or no recognizable response was received.

Hi All,
I am using project server 2007 and WSS 3.0.
I have been facing a strange issue for couple of days. I am unable to open PWA in browser and MS Project Pro on application server.
Everything is correct whether it is URL or MS Project profile account on MSP. This is strange because i can open same PWA/MSP from other computers (Database server / Client PCs) but not locally on server.
When i try to connect to MSP on App server, i get the following errors in event viewer.
Event Type: Error
Event Source: MSSOAP
Event ID: 16
User: N/A
Computer: APP-Server-Name
Description:
Soap error: Connection time out..
Event Type: Error
Event Source: MSSOAP
Event Category: Client
Event ID: 16
User: N/A
Computer: APP-Server-Name
Description:
Soap error: An unanticipated error occurred during the processing of this request..
Event Type: Error
Event Source: MSSOAP
Event Category: Client
Event ID: 16
User: N/A
Computer: APP-Server-Name
Description: Soap error: Sending the Soap message failed or no recognizable response was received.
Event Type: Error
Event Source: MSSOAP
Event Category: Client
Event ID: 16
User: N/A
Computer: APP-Server-Name
Description:
Soap error: Unspecified client error..
One more issue i am facing and i guess that is related to above issue. The Issue is, when i am creating a new project, It's workspace gets created but doesn't get linked to the project and i can't link it manually because it already exists for the project.
sandeep

Hi Paul ,
Thanks for reply. The project server URL was already added to the Trusted
Sites/Local Intranet areas in IE.
sandeep

SSRS: Failure sending mail: The transport failed to connect to the server.

I run SSRS and email reports using SMTP service on a Windows Server 2008 R2 box. This has been working for months and stopped today around noon.
I have checked all SMTP settings and verified they are correct. I can send an email from SQL Server Management Studio, using SMTP service with no trouble.
Now in SSRS I am getting this message:
Failure sending mail: The transport failed to connect to the server.
I have read every link when I google this message or type it into bing.com; yet cannot find a reason why SSRS has suddenly stopped emailing my reports.
I have restarted the server in question, I have changed account names, I have changed passwords, yet nothing is working.
I even approached our senior dba about it and he has never seen this happen.
Has anyone else experienced this issue?
Thank you,
Jessica

Thank you JJordheim.
IDS is not an issue. Neither is the Windows Firewall on the server. I actually turned it off while troubleshooting to make sure it was not causing the issue.
SSRS and my SMTP Virtual service are on the same server. I am running the SMTP service through IIS. I even created a new SMTP Service to test with. No luck.
My rsreportserver.config file looks fine, or at least it does to me. Posted below:
<Configuration>
<Dsn>AQAAANCMnd8BFdERjHoAwE/Cl+sBAAAAoroltqyZFk6Vi+2kNEmsQAQAAAAiAAAAUgBlAHAAbwBy
AHQAaQBuAGcAIABTAGUAcgB2AGUAcgAAABBmAAAAAQAAIAAAALMXYz8ommSjoJt2CZCuZmzmS+bo
5d4pT033TPn7WZoiAAAAAA6AAAAAAgAAIAAAAEmwCgTd0Xo4ssE0WGSo7KC3+nsOZd2sR/PT6hUQ
5SR44AAAAL4ReAnyjUBENbH63/qM8orgHrcG3s/MyNdjuBnfKhwlqauRfxwcNgjd7PtXLvS8gnBq
kTji38EuQHBOJ63rklEclaejzkcA45rAbzLqWBi7oftw1SwHahZQvp+zxFdKVuAGnhEjiKvcrgzl
ebfWNTjY/pjyJ9bwvF7vReIXrRXecPTjbE6wOiYFggY6pVCXvJCRvoUNMiLJC3PCIi58LOqVjPUO
juyIZUrNqTPZlhswNU0M+mM7W6YRqPtF+xXx1FBSe0PShD+29IgBOYBRFFfDbW93tbnw5nj5/xpk
I2GlQAAAAJoNASVS7KABbUZke+huE5HzjaXk1o7Sq9REu4Svlry1INKqJfo+dbGDWUAKEwbClVoO
RNs8QwPFYNIXyq6vDD0=</Dsn>
<ConnectionType>Default</ConnectionType>
<LogonUser></LogonUser>
<LogonDomain></LogonDomain>
<LogonCred></LogonCred>
<InstanceId>MSRS10_50.MSSQLSERVER</InstanceId>
<InstallationID>{e93dd46f-7646-44e2-9997-acc3cb001828}</InstallationID>
<Add Key="SecureConnectionLevel" Value="0"/>
<Add Key="CleanupCycleMinutes" Value="10"/>
<Add Key="MaxActiveReqForOneUser" Value="20"/>
<Add Key="DatabaseQueryTimeout" Value="120"/>
<Add Key="RunningRequestsScavengerCycle" Value="60"/>
<Add Key="RunningRequestsDbCycle" Value="60"/>
<Add Key="RunningRequestsAge" Value="30"/>
<Add Key="MaxScheduleWait" Value="5"/>
<Add Key="DisplayErrorLink" Value="true"/>
<Add Key="WebServiceUseFileShareStorage" Value="false"/>





<Add Key="WatsonFlags" Value="0x0428"/>
<Add Key="WatsonDumpOnExceptions" Value="Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException,Microsoft.ReportingServices.ReportProcessing.UnhandledReportRenderingException"/>
<Add Key="WatsonDumpExcludeIfContainsExceptions" Value="System.Threading.ThreadAbortException,System.Web.UI.ViewStateException,System.OutOfMemoryException,System.Web.HttpException,System.IO.IOException,System.IO.FileLoadException,Microsoft.SharePoint.SPException"/>
<URLReservations>
  <Application>
   <Name>ReportServerWebService</Name>
   <VirtualDirectory>ReportServer</VirtualDirectory>
   <URLs>
    <URL>
     <UrlString>http://+:80</UrlString>
     <AccountSid>S-1-5-19</AccountSid>
     <AccountName>NT Authority\LocalService</AccountName>
    </URL>
   </URLs>
  </Application>
  <Application>
   <Name>ReportManager</Name>
   <VirtualDirectory>Reports</VirtualDirectory>
   <URLs>
    <URL>
     <UrlString>http://+:80</UrlString>
     <AccountSid>S-1-5-19</AccountSid>
     <AccountName>NT Authority\LocalService</AccountName>
    </URL>
   </URLs>
  </Application>
</URLReservations>
<Authentication>
  <AuthenticationTypes>
   <RSWindowsNegotiate/>
   <RSWindowsNTLM/>
  </AuthenticationTypes>
  <RSWindowsExtendedProtectionLevel>Off</RSWindowsExtendedProtectionLevel>
  <RSWindowsExtendedProtectionScenario>Proxy</RSWindowsExtendedProtectionScenario>
  <EnableAuthPersistence>true</EnableAuthPersistence>
</Authentication>
<Service>
  <IsSchedulingService>True</IsSchedulingService>
  <IsNotificationService>True</IsNotificationService>
  <IsEventService>True</IsEventService>
  <PollingInterval>10</PollingInterval>
  <WindowsServiceUseFileShareStorage>False</WindowsServiceUseFileShareStorage>
  <MemorySafetyMargin>80</MemorySafetyMargin>
  <MemoryThreshold>90</MemoryThreshold>
  <RecycleTime>720</RecycleTime>
  <MaxAppDomainUnloadTime>30</MaxAppDomainUnloadTime>
  <MaxQueueThreads>0</MaxQueueThreads>
  <UrlRoot>http://abraham/Reports</UrlRoot>
  <UnattendedExecutionAccount>
   <UserName></UserName>
   <Password></Password>
   <Domain></Domain>
  </UnattendedExecutionAccount>
  <PolicyLevel>rssrvpolicy.config</PolicyLevel>
  <IsWebServiceEnabled>True</IsWebServiceEnabled>
  <IsReportManagerEnabled>True</IsReportManagerEnabled>
  <FileShareStorageLocation>
   <Path>
   </Path>
  </FileShareStorageLocation>
</Service>
<UI>
  <ReportServerUrl>
  </ReportServerUrl>
  <PageCountMode>Estimate</PageCountMode>
</UI>
<Extensions>
  <Delivery>
   <Extension Name="Report Server FileShare" Type="Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareProvider,ReportingServicesFileShareDeliveryProvider">
    <MaxRetries>3</MaxRetries>
    <SecondsBeforeRetry>900</SecondsBeforeRetry>
    <Configuration>
     <FileShareConfiguration>
      <ExcludedRenderFormats>
       <RenderingExtension>HTMLOWC</RenderingExtension>
       <RenderingExtension>NULL</RenderingExtension>
       <RenderingExtension>RGDI</RenderingExtension>
      </ExcludedRenderFormats>
     </FileShareConfiguration>
    </Configuration>
   </Extension>
   <Extension Name="Report Server Email" Type="Microsoft.ReportingServices.EmailDeliveryProvider.EmailProvider,ReportingServicesEmailDeliveryProvider">
    <MaxRetries>3</MaxRetries>
    <SecondsBeforeRetry>900</SecondsBeforeRetry>
    <Configuration>
     <RSEmailDPConfiguration>
      <SMTPServer>192.168.11.210</SMTPServer>
      <SMTPServerPort></SMTPServerPort>
      <SMTPAccountName>
      </SMTPAccountName>
      <SMTPConnectionTimeout>
      </SMTPConnectionTimeout>
      <SMTPServerPickupDirectory>
      </SMTPServerPickupDirectory>
      <SMTPUseSSL>
      </SMTPUseSSL>
      <SendUsing>2</SendUsing>
      <SMTPAuthenticate>
      </SMTPAuthenticate>
      <From>[email protected]</From>
      <EmbeddedRenderFormats>
       <RenderingExtension>MHTML</RenderingExtension>
      </EmbeddedRenderFormats>
      <PrivilegedUserRenderFormats>
      </PrivilegedUserRenderFormats>
      <ExcludedRenderFormats>
       <RenderingExtension>HTMLOWC</RenderingExtension>
       <RenderingExtension>NULL</RenderingExtension>
       <RenderingExtension>RGDI</RenderingExtension>
      </ExcludedRenderFormats>
      <SendEmailToUserAlias>True</SendEmailToUserAlias>
      <DefaultHostName>
      </DefaultHostName>
      <PermittedHosts>
      </PermittedHosts>
     </RSEmailDPConfiguration>
    </Configuration>
   </Extension>
   <Extension Name="Report Server DocumentLibrary" Type="Microsoft.ReportingServices.SharePoint.SharePointDeliveryExtension.DocumentLibraryProvider,ReportingServicesSharePointDeliveryExtension">
    <MaxRetries>3</MaxRetries>
    <SecondsBeforeRetry>900</SecondsBeforeRetry>
    <Configuration>
     <DocumentLibraryConfiguration>
      <ExcludedRenderFormats>
       <RenderingExtension>HTMLOWC</RenderingExtension>
       <RenderingExtension>NULL</RenderingExtension>
       <RenderingExtension>RGDI</RenderingExtension>
      </ExcludedRenderFormats>
     </DocumentLibraryConfiguration>
    </Configuration>
   </Extension>
   <Extension Name="NULL" Type="Microsoft.ReportingServices.NullDeliveryProvider.NullProvider,ReportingServicesNullDeliveryProvider"/>
  </Delivery>
  <DeliveryUI>
   <Extension Name="Report Server Email" Type="Microsoft.ReportingServices.EmailDeliveryProvider.EmailDeliveryProviderControl,ReportingServicesEmailDeliveryProvider">
    <DefaultDeliveryExtension>True</DefaultDeliveryExtension>
    <Configuration>
     <RSEmailDPConfiguration>
      <DefaultRenderingExtension>MHTML</DefaultRenderingExtension>
     </RSEmailDPConfiguration>
    </Configuration>
   </Extension>
   <Extension Name="Report Server FileShare" Type="Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareUIControl,ReportingServicesFileShareDeliveryProvider"/>
  </DeliveryUI>
  <Render>
   <Extension Name="XML" Type="Microsoft.ReportingServices.Rendering.DataRenderer.XmlDataReport,Microsoft.ReportingServices.DataRendering"/>
   <Extension Name="NULL" Type="Microsoft.ReportingServices.Rendering.NullRenderer.NullReport,Microsoft.ReportingServices.NullRendering" Visible="false"/>
   <Extension Name="CSV" Type="Microsoft.ReportingServices.Rendering.DataRenderer.CsvReport,Microsoft.ReportingServices.DataRendering"/>
   <Extension Name="ATOM" Type="Microsoft.ReportingServices.Rendering.DataRenderer.AtomDataReport,Microsoft.ReportingServices.DataRendering" Visible="false"/>
   <Extension Name="PDF" Type="Microsoft.ReportingServices.Rendering.ImageRenderer.PDFRenderer,Microsoft.ReportingServices.ImageRendering"/>
   <Extension Name="RGDI" Type="Microsoft.ReportingServices.Rendering.ImageRenderer.RGDIRenderer,Microsoft.ReportingServices.ImageRendering" Visible="false"/>
   <Extension Name="HTML4.0" Type="Microsoft.ReportingServices.Rendering.HtmlRenderer.Html40RenderingExtension,Microsoft.ReportingServices.HtmlRendering" Visible="false"/>
   <Extension Name="MHTML" Type="Microsoft.ReportingServices.Rendering.HtmlRenderer.MHtmlRenderingExtension,Microsoft.ReportingServices.HtmlRendering"/>
   <Extension Name="EXCEL" Type="Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer,Microsoft.ReportingServices.ExcelRendering"/>
   <Extension Name="RPL" Type="Microsoft.ReportingServices.Rendering.RPLRendering.RPLRenderer,Microsoft.ReportingServices.RPLRendering" Visible="false" LogAllExecutionRequests="false"/>
   <Extension Name="IMAGE" Type="Microsoft.ReportingServices.Rendering.ImageRenderer.ImageRenderer,Microsoft.ReportingServices.ImageRendering"/>
   <Extension Name="WORD" Type="Microsoft.ReportingServices.Rendering.WordRenderer.WordDocumentRenderer,Microsoft.ReportingServices.WordRendering"/>
  </Render>
  <Data>
   <Extension Name="SQL" Type="Microsoft.ReportingServices.DataExtensions.SqlConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
   <Extension Name="SQLAZURE" Type="Microsoft.ReportingServices.DataExtensions.SqlAzureConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
   <Extension Name="SQLPDW" Type="Microsoft.ReportingServices.DataExtensions.SqlDwConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
   <Extension Name="OLEDB" Type="Microsoft.ReportingServices.DataExtensions.OleDbConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
   <Extension Name="OLEDB-MD" Type="Microsoft.ReportingServices.DataExtensions.AdoMdConnection,Microsoft.ReportingServices.DataExtensions"/>
   <Extension Name="ORACLE" Type="Microsoft.ReportingServices.DataExtensions.OracleClientConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
   <Extension Name="ODBC" Type="Microsoft.ReportingServices.DataExtensions.OdbcConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
   <Extension Name="XML" Type="Microsoft.ReportingServices.DataExtensions.XmlDPConnection,Microsoft.ReportingServices.DataExtensions"/>
   <Extension Name="SHAREPOINTLIST" Type="Microsoft.ReportingServices.DataExtensions.SharePointList.SPListConnection,Microsoft.ReportingServices.DataExtensions"/>
   <Extension Name="SAPBW" Type="Microsoft.ReportingServices.DataExtensions.SapBw.SapBwConnection,Microsoft.ReportingServices.DataExtensions.SapBw"/>
   <Extension Name="ESSBASE" Type="Microsoft.ReportingServices.DataExtensions.Essbase.EssbaseConnection,Microsoft.ReportingServices.DataExtensions.Essbase"/>
   <Extension Name="TERADATA" Type="Microsoft.ReportingServices.DataExtensions.TeradataConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
  </Data>
  <SemanticQuery>
   <Extension Name="SQL" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.MSSQL.MSSqlSQCommand,Microsoft.ReportingServices.SemanticQueryEngine">
    <Configuration>
     <EnableMathOpCasting>False</EnableMathOpCasting>
    </Configuration>
   </Extension>
   <Extension Name="SQLAZURE" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.MSSQL.MSSqlSQCommand,Microsoft.ReportingServices.SemanticQueryEngine">
    <Configuration>
     <EnableMathOpCasting>False</EnableMathOpCasting>
    </Configuration>
   </Extension>
   <Extension Name="SQLPDW" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.MSSQLADW.MSSqlAdwSQCommand,Microsoft.ReportingServices.SemanticQueryEngine">
    <Configuration>
     <EnableMathOpCasting>False</EnableMathOpCasting>
    </Configuration>
   </Extension>
   <Extension Name="ORACLE" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.Oracle.OraSqlSQCommand,Microsoft.ReportingServices.SemanticQueryEngine">
    <Configuration>
     <EnableMathOpCasting>True</EnableMathOpCasting>
     <DisableNO_MERGEInLeftOuters>False</DisableNO_MERGEInLeftOuters>
     <EnableUnistr>False</EnableUnistr>
     <DisableTSTruncation>False</DisableTSTruncation>
    </Configuration>
   </Extension>
   <Extension Name="TERADATA" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.Teradata.TdSqlSQCommand,Microsoft.ReportingServices.SemanticQueryEngine">
    <Configuration>
     <EnableMathOpCasting>True</EnableMathOpCasting>
     <ReplaceFunctionName>oREPLACE</ReplaceFunctionName>
    </Configuration>
   </Extension>
   <Extension Name="OLEDB-MD" Type="Microsoft.AnalysisServices.Modeling.QueryExecution.ASSemanticQueryCommand,Microsoft.AnalysisServices.Modeling"/>
  </SemanticQuery>
  <ModelGeneration>
   <Extension Name="SQL" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.MSSQL.MsSqlModelGenerator,Microsoft.ReportingServices.SemanticQueryEngine"/>
   <Extension Name="SQLAZURE" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.MSSQL.MsSqlModelGenerator,Microsoft.ReportingServices.SemanticQueryEngine"/>
   <Extension Name="ORACLE" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.Oracle.OraSqlModelGenerator,Microsoft.ReportingServices.SemanticQueryEngine"/>
   <Extension Name="TERADATA" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.Teradata.TdSqlModelGenerator,Microsoft.ReportingServices.SemanticQueryEngine"/>
   <Extension Name="OLEDB-MD" Type="Microsoft.AnalysisServices.Modeling.Generation.ModelGeneratorExtention,Microsoft.AnalysisServices.Modeling"/>
  </ModelGeneration>
  <Security>
   <Extension Name="Windows" Type="Microsoft.ReportingServices.Authorization.WindowsAuthorization, Microsoft.ReportingServices.Authorization"/>
  </Security>
  <Authentication>
   <Extension Name="Windows" Type="Microsoft.ReportingServices.Authentication.WindowsAuthentication, Microsoft.ReportingServices.Authorization"/>
  </Authentication>
  <EventProcessing>
   <Extension Name="SnapShot Extension" Type="Microsoft.ReportingServices.Library.HistorySnapShotCreatedHandler,ReportingServicesLibrary">
    <Event>
     <Type>ReportHistorySnapshotCreated</Type>
    </Event>
   </Extension>
   <Extension Name="Timed Subscription Extension" Type="Microsoft.ReportingServices.Library.TimedSubscriptionHandler,ReportingServicesLibrary">
    <Event>
     <Type>TimedSubscription</Type>
    </Event>
   </Extension>
   <Extension Name="Cache Refresh Plan Extension" Type="Microsoft.ReportingServices.Library.CacheRefreshPlanHandler,ReportingServicesLibrary">
    <Event>
     <Type>RefreshCache</Type>
    </Event>
   </Extension>
   <Extension Name="Cache Update Extension" Type="Microsoft.ReportingServices.Library.ReportExecutionSnapshotUpdateEventHandler,ReportingServicesLibrary">
    <Event>
     <Type>SnapshotUpdated</Type>
    </Event>
   </Extension>
  </EventProcessing>
</Extensions>
<MapTileServerConfiguration>
  <MaxConnections>2</MaxConnections>
  <Timeout>10</Timeout>
  <AppID>(Default)</AppID>
  <CacheLevel>Default</CacheLevel>
</MapTileServerConfiguration>
</Configuration>

Since updating my macbook air with OS X mavericks i can't send emails smtp account failed my email host is 123reg

since updating my macbook air with OS X mavericks i can't send emails smtp account failed my email host is 123reg any ideas how to sort it out?

I am having the same issue with Media Temple Email.
My problem in more detail is:
Adding my Media Temple Hosted domain email to a desktop service on my Macbook Air.
I have tried this on both Mac Mail and Thunderbird.
I add the account manually and have checked, double checked, triple checked the server addresss and also the user name and password and they are correct.
I have altered the ports from being default to custom and have tried both SSL and non SSL and still it is unable to connect to the SMTP server.
IMAP inbox is working as I recieve mails but can not send them.
I have chatted to Media Temple and they say it must be something to do with the hardware of the MacBook Air which to start with I disagreed with but I have since tried adding the email to my Mac Mini and it works fine.
I am assuming their is an issue in the MacBook Air with the SMTP ports and I would really appreciate some advice on how to fix this as I don't want to use Webmail for ever.
Thanks in Advance

I can't send emails from iPhone until I connect to my wifi! I am with bigpond and have a bigpond email address. Can anyone help me?

I can't send emails from iPhone until I connect to my wifi at home. I am with bigpond and have a bigpond email address. Can anyone help me?

Try closing the Mail app completely and see if it works properly when you re-open it : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

I have Acrobat XI on a PC and have received a Fatal Error message indicating that "Acrobat failed to connect to a DDE Server." Acrobat will not open now. How do I regain access to the program?

I have Acrobat XI on PC. After trying to convert a webpage to PDF, I received a Fatal Error message indicating that "Acrobat failed to connect to a DDE Server." Now, the program will not open. How do I regain access to the program?

I have Acrobat XI Pro and have been experiencing all sorts of "freeze ups" with it ever since Adobe released the new Acrobat DC the other week. I see that an automatic update was pushed down to my Acrobat XI Pro at the same time. Is this the first issue you have encountered with your Acrobat XI, or have you been having other issues suddenly as well?? Just wondering ...

Could not send email while in MX, wireless connection

Last week I could not send email while in MX, wireless connection, using an SMTP server I usually use, and had used from Europe months before - only difference was that I did not turn on AT&T's international access feature. I wish now that I had thought to turn off localization. Email went out when I returned to the USA with no other change. Is this a known "feature"?

Bring the Mail browser window forward, then select Enter Time Machine from the Time Machine menu, which is represented by a clock icon in the menu bar. If you don't have that menu, select
 ▹ System Preferences ▹ Time Machine ▹ Show Time Machine in menu bar
Scroll back in the time-travel view to the most recent snapshot containing the messages you want to restore. Select the messages, then click Restore. The messages will be restored to a new mailbox. From there you can move them wherever you like.

Just got a new iPad 2. 64 GB. It will connect to wifi and facetime works, but email and internet won't connect. Suggestions? Thanks!

Just got a new iPad 2. It is 64 GB. It will connect to wifi no problem and facetime works, but email and internet won't connect.
Suggestions?
Thanks!

If facetime works, then the internet IS connecting.

HT3204 When attempting to burn an audio cd, I get an error message that says-burning failed due to unknown error (4280)? It has been working fine, until today...what does this mean??

When attempting to burn an audio cd from my playlist, I get an error message that says, burn failed due to unknown error (4280). It has been working fine for months...any solutions?

I have the exact same problem.
Been searching through this site to try and find an answer but still not come up with anything.
The wierd thing is that a couple of days ago it was working fine, and suddenly overnight it's stopped working.
The only solution i've found is that you need to have administrator rights as it says in the posts on the site below:
http://www.emergingearth.com/itunes-7-cant-burn-cds/
Noticed by the diagnostic in your post that you dont have admin rights like me so that mite be the problem. Not sure if this is the right solution though.
Windows XP

Cannot send email via ActiveSync when user connect from Internet (Exchange 2010 SP3 RU5)

Hi All.
This is the first time I encounter this kind of issue, whenever user connect from the internet they cannot send email from their Phone or Windows Mail App, but they can retrieve email
But when they connect from Internal Network they can send email. I already test ActiveSync from internet using www.testexchangeconnectivity.com and it pass all tests.
I also check the Firewall and all the necessary ports already opened (we even open all ports) , the default TTL on the firewall 3600 second.
From what I read ActiveSync use some kind of HTTP POST or in MS terminology "PING" command, but still have no idea what kind of configuration that should be made to the Firewall so it can pass this "PING" command. Because from what I
see in Android Logcat the problem always related to this PING command
10-07 08:12:38.714 I/Exchange(31971): Interrupt with reason 1
10-07 08:12:38.714 I/Exchange(31971): Ping task ending with status: -1
10-07 08:12:38.904 D/Exchange(31971): created outputstream
10-07 08:12:39.204 W/Exchange(31971): IOException sending mail
10-07 08:12:39.204 E/Exchange(31971): Generic error for operation SendMail: status 200, result -100
10-07 08:12:39.204 W/Exchange(31971): Aborting outbox sync for error -99
10-07 08:12:39.274 I/Exchange(31971): Ping task starting for 3
10-07 08:12:39.304 D/SyncManager(644): failed sync operation [email protected] u0 (com.android.exchange), com.android.email.provider, USER, latestRunTime 71219435, EXPEDITED, reason: 10040, SyncResult: stats [ numIoExceptions: 1]
10-07 08:12:39.304 D/SyncManager(644): not retrying sync operation because SYNC_EXTRAS_DO_NOT_RETRY was specified [email protected] u0 (com.android.exchange), com.android.email.provider, USER, latestRunTime 71220078, EXPEDITED, reason: 10040

Hi ronaldosy,
How about the work flow of Outlook or OWA on PC internally/externally?
If only phone has this issue, I suggest ask ActiveSync Forum for help so that you can get more professional suggestions. For your convenience:
http://social.technet.microsoft.com/Forums/exchange/en-US/home?forum=exchangesvrmobility
Best Regards,
Allen Wang

HT1338 can not retrieve os send email even though I'm connected to the internet

How can I get my email working again? I can call up old mail using help, but I can not receive new emails or send emails.I can however erase old emails.

I think Adobe has problems with its server since the last 2 days. Everyone is experiencing these problems world wide. Not all the time but several hours a day.

Need help: Error sending Email from 6270

When I try to send a Email message using the handset in-built mail client, the following error is reported on handset screen-
Stop "String index out of range: -2" with only possibility of "Dismiss" button.
I have done the personal config settings for a local SMTP and POP server that does not use SSL since 6270 does not support it. I am able to retrieve emails, use browser but sending mail fails with the error above.
Please help since Nokia-Care replies are not worth mentioning here. Their service centre in Bangalore-India is pushing the issue to operator. But operator (Airtel) is not to blame. Airtel is not blocking access to the servers (local as well GMAIL) since I am able to access (send and recieve) these servers from Outlook-PC that connects via the USB cable to this handset. Either settings are not correct or it is a bug in 6270.
If anyone has been able to use 6270 to send emails, please send me your settings minus your passwords ofcourse. It will help me try again if I missed something.
Thanks in advance
Anupam

Hi all,
I am also sharing the settings that I did on the handset. BSNL server does not use a secure connection. I had used "@" in the settings but in test below it is shown as
" AT " for preventing spam.
Let me know if you have any sugeestion.
Anupam.
Settings -> Configuration -> Personal Config. settings ===
@My bsnl
Account Name: My bsnl
My name: Anupam
Email Address: anupams_blr AT dataone.in
Include Signature: No
Reply to address: anupams_blr AT dataone.in
SMTP secure login: Disabled (Have also tried other 3 options)
SMTP user name: anupams_blr AT dataone.in
SMTP password: ********
Outgoing SMTP Server: smra.sancharnet.in
Outgoing SMTP port: 25
Use preferred access point: Yes
SMTP access point: (grayed out)
Incoming server Type: POP3
Incoming mail settings:
Retrieve emails: 30
POP3 secure login: Disabled
POP3 user name: anupams_blr AT dataone.in
POP3 password: *******
Incoming POP3 server: smma.sancharnet.in
Incoming POP3 port: 110
Use preferred access point: Yes
POP3 access point: (grayed out)
=======================================================

Sending email with Opera fails?

I'm trying out Opera 9.5 Beta 2 and am experiencing problems when trying to send mail.
As far as I can tell I have set up Opera the exact same way as Claws which is working perfectly fine.
However, when trying to send a mail with Opera I get this error message:
Sending e-mail failed. Maybe the SMTP server is not set up properly? E-mail queued.
I've looked over the settings in Tools->Mail and Chat accounts quite a few times by now but can't find any settings to work. I have even deleted the account and re-created it but without success. I need to authenticate to the smtp server, wich I do, but it still doesn't work.
Have anyone else experienced problems with this? Any pointers to what I can do to get this thing working?
What bugs me the most is that it works with Claws but not with Opera

yes. the problem is, i want to connect to the mailserver via ssl on port 465. When the mailserver can�t build a ssl-connection, he changes the connectiontype to default.. -> non-ssl, port 25..
My question is, why does the ssl-connection failure?
I guess the cacerts-file of Sun in C:\j2sdk1.4.2_04\jre\lib\security\cacerts does�nt support the gmx-server-certificate... or i�m doing something wrong with setting up the ssl-connection in java..
Do i have to do anything else then setting the above properties?
Thanks in advance.
Filo

Error sending email in hyperion financial reporting

Hi,
While scheduling a batch for a report in HFR we are unable to get email notifications and we are getting the following error as below
Batch "Shared Workspace pages/ Cashflow batch" finished at thursday,December 6,2012 10.25.14 AM EST
Error sending e-mail.
Can anyone give suggestions to reoslve this issue.
Regards,
Sai
Edited by: 975434 on Dec 6, 2012 10:43 PM

Hi Ajay,
Today we are unable to connect to the VPN network due to some network issues, once we got connected i will try executing the following manner you replied.
Mean while i tried to surf this issue in google browser and find out a link.
http://www.elmajdal.net/win2k8/how_to_enable_telnet_in_windows_server_2008.aspx
Can you please go through this link and confirm me whether this will assist me to resolve the issue.
Regards,
Sai

Error sending emails to Internet: Failed to connect. Winsock error code: 10051

Similar Messages

Maybe you are looking for