Error SQL Concat FormCalc

hello
I'm starting with FormCalc, and I have my first question.
line "a" is correct when SelectField field was numeric. BUT I changed the field SelectField to text, and I wrote the line "b" and gives me error.
You can help me, where I have the error.
a)
$sourceSet.DataConnection.#command.query.select.nodes.item(0).value = Concat("Select * from OfficeSupplies Where ID = ", Ltrim(Rtrim(SelectField.rawValue)) ,"")
b)
$sourceSet.DataConnection.#command.query.select.nodes.item(0).value = Concat("Select * from OfficeSupplies Where ID = ",SelectField.rawValue,"")
Thank you very much

Similar Messages

Loading issue : Error: sql error in the database while accessing a table

Hello,
where as one of the DTP in the process chain failed due to *Error: sql error in the database while accessing a table*, where as in the short dump it showing as Transaction log of data base is full., but i checked the data base space in DB02, more space is available . once we run the same DTP by manually its successful. its not through any errors.
could u please help me out solve the problem.
Thanks
siva kumar.

it might be a lock. do you drop index before loading?
the database might be full at the moment of loading and not later if many loadings happen at the same time on the same system...
when you then rerun your dtp manually, it can go through as it's perhaps the only one running at that moment...
you can try to set the btch parameter to 1...this will help in some cases.
M.

Error: sql.SQLError: [-4008] (at 1) Unknown user name/password combination

Hello Experts,
After a Test refresh for SCM system, we restored Livecache. The database has been changed and starts using database manager, during registration (Register LCApps) it gives the following error:
Logical Command: DBMRFC
Parameter: exec_lcinit register
Name and Server     : LCQ - dusepierp12
DBMRFC Function     : DBM_EXECUTE
Command             : exec_lcinit register
Error               : DBM Error
Return Code         :     -24964
Error Message       : ERR_EXECUTE: error in program execution#
0,sap\lcinit LCQ register -uDBM , -uDBA , -uSQL ,
liveCache LCQ (register)
The liveCache state is ONLINE
DBMServer 7.6.04   Build 009-123-182-193
Creating liveCache application procedures
ERROR : liveCache LCQ not registered (see "s:\sapdb\data\wrk\LCQ\lcinit.log").
START *****************************
liveCache LCQ (register)
Thu 07/30/2009
10:26 PM
installation path = S:\sapdb\LCQ\db
OK
DBMServer 7.6.04   Build 009-123-182-193
Creating liveCache application procedures
ERR
-24964,ERR_EXECUTE: error in program execution
1,""S:\sapdb\LCQ\db\bin\x_python" "S:\sapdb\LCQ\db\env\lapps.py" -R "S:\sapdb\LCQ\db" -d LCQ -u DBADMIN,*"
Traceback----
Error----
sql.SQLError: [-4008] (at 1) Unknown user name/password combination
Traceback (most recent call last):
File "S:\sapdb\LCQ\db\env\lapps.py", line 38, in ?
    connectAndInstall (install, install.__doc__)
File "S:\sapdb\LCQ\db\env\installib.py", line 398, in connectAndInstall
    session = connect (options)
File "S:\sapdb\LCQ\db\env\installib.py", line 350, in connect
    alterUserNotExclusive(options)
File "S:\sapdb\LCQ\db\env\installib.py", line 338, in alterUserNotExclusive
    session.release()
AttributeError: 'NoneType' object has no attribute 'release'
ERROR : liveCache LCQ not registered
Thu 07/30/2009
10:26 PM
END ******************************
Many Thanks,
TIA,
Nisch

Nischal Mahakal wrote:>
> Hello Experts,
>
> After a Test refresh for SCM system, we restored Livecache. The database has been changed and starts using database manager, during registration (Register LCApps) it gives the following error:
> -24964,ERR_EXECUTE: error in program execution
> 1,""S:\sapdb\LCQ\db\bin\x_python" "S:\sapdb\LCQ\db\env\lapps.py" -R "S:\sapdb\LCQ\db" -d LCQ -u DBADMIN,*"
> -
Traceback----
Hi there,
looks like you entered "DBADMIN" when you created the liveCache instance in DBMGUI as the DBM Operator.
For SAP installations, this user is always named "CONTROL".
So, drop the instance again, recreate it with "CONTROL" and re-do the recovery of the liveCache backup.
regards,
Lars

Runtime error SQL error 3114 occurred when accessing program CX_ w

Hi Friends,
Iam in a big mess . I have one query based on one my Zinfocube.This query ia attached in the workbook .. Previuolsy all was fine , but now whever iam executing this query it is throwing me the exception
Query 0: Runtime error SQL error 3114 occurred when accessing program CX_ with parallel processing via RFC.
and
Beim Lesen der Daten sind Fehler aufgetreten. Navigation ist mÃ¶glich
I am not able to get the cause of error ..
Can anybody help me in this regrd as its a bit urgent.
Thanks in advance..

Hi , thanks for replying ,
I have tried running query through RSRT also , its not working still it is giving me the same error .
In st22 it is showing me the follwing dump.
DBIF_REPO_SQL_ERROR
Short text
    SQL error 3114 occurred when accessing program
What happened?
    The system is no longer linked to an ORACLE instance.
    No further operations can be performed on the database.
What can you do?
    You cannot eliminate this error yourself.
    Please inform your database administrator.
    Note which actions and input led to the error.
    For further help in handling the problem, contact your SAP administrator
    You can use the ABAP dump analysis transaction ST22 to view and manage
    termination messages, in particular for long term reference.
    Note which actions and input led to the error.
    For further help in handling the problem, contact your SAP administrator
    You can use the ABAP dump analysis transaction ST22 to view and manage
    termination messages, in particular for long term reference.
Error analysis
    The system attempted to access an ORACLE instance to which
    it is no longer linked.
    This situation may arise because the ORACLE instance
    has been stopped due to an error or an external operation.
How to correct the error
    Database error text........: "ORA-03114: not connected to ORACLE"
    Triggering SQL statement...: "CX_SQL_EXCEPTION==============CP "
    The current status of the ORACLE instance cannot be determined.
    It may be still inactive or the database administrator may have
    restarted it.
    In any case, all systems that have accessed the ORACLE instance
    must be restarted after the ORACLE instance has been restarted.
    If you were working on a central system, inform
    your system administrator.
    If you were working on an external local system, inform
    the person responsible for this system.
    If you were working on your own local system, restart
    the system yourself.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "DBIF_REPO_SQL_ERROR" " "
    "CL_SQL_RESULT_SET=============CP" or "CL_SQL_RESULT_SET=============CM006"
    "NEXT_PACKAGE"
    If you cannot solve the problem yourself and want to send an errornotification to SAP, include the following information:
1. The description of the current problem (short dump)
   To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
   Display the system log by calling transaction SM21.
   Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
   In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DBIF_REPO_SQL_ERROR" " "
"CL_SQL_RESULT_SET=============CP" or "CL_SQL_RESULT_SET=============CM006"
"NEXT_PACKAGE"
Thanks in Advance..

Error Sql Loader in prompt command

Hi
When I tried to execute loader from PROMPT WINDOWS
sqlldr triton/en62ss63 control=ttiitm983501.ctl
return me error
SQL*Loader-704: Erro interno: ulconnect: OCIServerAttach [0]
ORA-12560: TNS:erro de adaptador de protocoloBut when I to execute from TOAD work fine
Why ?
TIA
using oracle 9.2.02

Have you set the necessary oracle environment variables before invoking sqlldr ?
HTH
Srini

|Error SQL: ORA-14400: inserted partition key does not map to any partition

I have an installation of ECC6 with BI7 in which consolidated through SEM-BCS OBCS_C10 with the cube, which I have version 100 for fiscal data, 101 data for IFRS and IFRS Copying a 301 version.
The client will ask me the empty version of the 301 in the cube OBCS_C10.
Before switching to empty the cube "Target Real-Time Data Can Be Loaded With Data; Planning Not Allowed."
To empty the cube using transaction RSA1 / manage / contents / Delete Selection.
However, the data is not erased and revise the job gives me the error:
Resumen log job para job BI_INDXD51A1NTCIYWU06OKZZESN1R94 / 07520600
Log job
Hora
Txt.mje.no codificado
04.02.2009
07:52:06
El job ha sido lanzado.
04.02.2009
07:52:06
Paso 001 iniciado (programa RSINDEX1, variante &0000000000108, usuario ACHUY)
04.02.2009
07:52:10
SQL: 04.02.2009 07:52:10 ACHUY
04.02.2009
07:52:10
DELETE FROM DDSTORAGE WHERE DBSYSABBR = 'ORA'
04.02.2009
07:52:10
AND INDEXNAME = ' ' AND TABNAME =
04.02.2009
07:52:10
'/BI0/D0BCS_C101
04.02.2009
07:52:10
SQL-END: 04.02.2009 07:52:10 00:00:00
04.02.2009
07:52:10
SQL: 04.02.2009 07:52:10 ACHUY
04.02.2009
07:52:10
DELETE FROM DDSTORAGE WHERE DBSYSABBR = 'ORA'
04.02.2009
07:52:10
AND INDEXNAME = ' ' AND TABNAME =
04.02.2009
07:52:10
'/BI0/D0BCS_C101
04.02.2009
07:52:10
SQL-END: 04.02.2009 07:52:10 00:00:00
04.02.2009
07:52:10
SQL: 04.02.2009 07:52:10 ACHUY
04.02.2009
07:52:10
CREATE TABLE "/BI0/0100000076" PCTFREE 00
04.02.2009
07:52:10
PCTUSED 00 INITRANS 001 TABLESPACE PSAPSR3
04.02.2009
07:52:10
STORAGE (INITIAL     0000000016 K NEXT
04.02.2009
07:52:10
0000000016 K MINEXTENTS 0000000001 MAXEXTENTS
04.02.2009
07:52:10
UNLIMITED PCTINCREASE 0000 FREELISTS   001
04.02.2009
07:52:10
FREELIST GROUPS 01) AS SELECT DISTINCT DIMID FROM
04.02.2009
07:52:10
"/BI0/D0BCS_C101" "DIM" , "/BI0/SCS_VERSION"
04.02.2009
07:52:10
"MD1" WHERE "DIM"."SID_0CS_VERSION" = "MD1"."SID"
04.02.2009
07:52:10
AND ( "MD1"."CS_VERSION" BETWEEN '301' AND '301'
04.02.2009
07:52:10
SQL-END: 04.02.2009 07:52:10 00:00:00
04.02.2009
07:52:25
SQL: 04.02.2009 07:52:25 ACHUY
04.02.2009
07:52:25
DELETE FROM DDSTORAGE WHERE DBSYSABBR = 'ORA'
04.02.2009
07:52:25
AND INDEXNAME = ' ' AND TABNAME = '/BI0/F0BCS_C10
04.02.2009
07:52:25
SQL-END: 04.02.2009 07:52:25 00:00:00
04.02.2009
07:52:25
SQL: 04.02.2009 07:52:25 ACHUY
04.02.2009
07:52:25
DELETE FROM DDSTORAGE WHERE DBSYSABBR = 'ORA'
04.02.2009
07:52:25
AND INDEXNAME = ' ' AND TABNAME = '/BI0/F0BCS_C10
04.02.2009
07:52:25
SQL-END: 04.02.2009 07:52:25 00:00:00
04.02.2009
07:52:25
SQL: 04.02.2009 07:52:25 ACHUY
04.02.2009
07:52:25
CREATE TABLE "/BI0/0100000030" PCTFREE 10
04.02.2009
07:52:25
PCTUSED 00 INITRANS 001 TABLESPACE PSAPSR3
04.02.2009
07:52:25
STORAGE (INITIAL     0000000016 K NEXT
04.02.2009
07:52:25
0000000000 K MINEXTENTS 0000000001 MAXEXTENTS
04.02.2009
07:52:25
2147483645 PCTINCREASE 0000 FREELISTS   001
04.02.2009
07:52:25
FREELIST GROUPS 01) PARTITION BY RANGE
04.02.2009
07:52:25
("KEY_0BCS_C10P") ( PARTITION "/BI0/F0BCS_C100"
04.02.2009
07:52:25
VALUES LESS THAN (0) TABLESPACE "PSAPSR3",
04.02.2009
07:52:25
PARTITION "/BI0/F0BCS_C100000000019" VALUES LESS
04.02.2009
07:52:25
THAN (0000000019) TABLESPACE "PSAPSR3", PARTITION
              |
04.02.2009
07:52:25
"/BI0/F0BCS_C100000000276" VALUES LESS THAN
04.02.2009
07:52:25
(0000000276) TABLESPACE "PSAPSR3", PARTITION
04.02.2009
07:52:25
"/BI0/F0BCS_C100000000277" VALUES LESS THAN
04.02.2009
07:52:25
(0000000277) TABLESPACE "PSAPSR3") AS SELECT *
04.02.2009
07:52:25
FROM "/BI0/F0BCS_C10" WHERE "KEY_0BCS_C101" NOT
04.02.2009
07:52:25
IN ( SELECT "DIMID" FROM "/BI0/0100000076"
04.02.2009
07:52:29
SQL-END: 04.02.2009 07:52:29 00:00:04
04.02.2009
07:52:29
Error SQL: ORA-14400: inserted partition key does not map to any partition
04.02.2009
07:52:29
Error de sistema: CREATE_TABLE_AS_SELECT/RSDU_EXEC_SQL /BI0/0100000030 14400
04.02.2009
07:52:29
El job ha sido cancelado tras excepción de sistema ERROR_MESSAGE.
Someone has an idea how to fix this?

This is the SQL of the insert
The partition condition of the table is the column ("KEY_0BCS_C10P")
SELECT * FROM "/BI0/F0BCS_C10" WHERE "KEY_0BCS_C101" NOT IN ( SELECT "DIMID" FROM "/BI0/0100000076" )
This is the info of the /BIO/0100000076 TABLE
SQL> SELECT "DIMID" FROM sapsr3."/BI0/0100000076";
     DIMID
         6
SQL>
And this are the rows that I think are not included in the partitions of the table
1 SELECT DISTINCT KEY_0BCS_C10P, KEY_0BCS_C101 FROM SAPSR3."/BI0/F0BCS_C10"
2 WHERE KEY_0BCS_C10P > 277
3* AND "KEY_0BCS_C101" NOT IN ( SELECT "DIMID" FROM SAPSR3."/BI0/0100000076" )
SQL> /
KEY_0BCS_C10P KEY_0BCS_C101
          284             4
          285             4
          293             3
          292             4
          293             4
          293             5
          285             3
          290             4
          292             5
          283             4
          285             5
KEY_0BCS_C10P KEY_0BCS_C101
          291             5
          292             3
          291             4
14 rows selected.
SQL>

ERROr- SQL*Loader-704: Internal error: ulconnect: OCIServerAttach [0]

Hi All,
I was running a java program which uses java runtime to call Oracle SQL Loader to load a data file inthe Data base , After loading one file sucessfully , the process stopped after giving the error -:
SQL*Loader execution exited with EX_FAIL, see logfile:SQL*Loader-704: Internal error: ulconnect: OCIServerAttach [0]
ORA-12154: TNS:could not resolve service name
Can anyone please let me know What can be the problem . ???? Please let me know where the problem lies ?
Regards
Asif

Can some one help to solve this problem????
Edited by: NanthaKumarAR on Apr 13, 2012 5:55 AM

SQL Error 130, not found in ERROR.SQL file.

Dear All,
While connecting my application with Oracle Release 9.2.0.8.0 I am having the following error message would any one help in this regard please?
SQL Error 130, not found in ERROR.SQL file
Thanks
GQ

How is this connection being made?
Is it Oracle Forms, SQL*Plus, Java, .NET, JDBC etc?
The error message doesn't look like a standard ORA-XXXXX oracle error so I would suggest the message relates to the application trying to make the connection.

ADO function error:SQL execute.vi is not executable.

Thanks for everyone who is willing to help me out of this problem that puzzled me several days,I can't find a similar one from Google or other forum..
Problem:
When I was using LabSQL,it come an error:
Subvi "SQL execute":subvi isnot executable. and then I searched the source of the error,it was finally found to be the
"ADO Recordset GetString.vi":
"invoke node:invalid method"
"invoke node:invalid refnum class".
What I used is Windows 7 and LabVIEW7.1.
Attached is the detail of this problem that includes the vi and some error pictures,and the ADO functions I used.
ute.vi" is
Attachments:
Error.zip ‏1865 KB

Duplicate - http://forums.ni.com/t5/LabVIEW/ADO-function-error-SQL-execute-vi-is-not-executable/m-p/2397360#M742...
Try to take over the world!

Error SQL:1114 in execution of query

Hi Experts,
When I execute a query, I show the message "Waiting for server response" and then happens the next error "Error SQL:1114
System error in program SAPLRSDRC y FORM 1114"
Can Anyone help me?
Thanks

Hi,
Ask your Basis guy to take a look on the note:
545385
With rgds,
Anil Kumar Sharma .P
Assign thepoints if it helps you.

SQL Loader error: SQL*Loader-926. Please help

Hi,
While loading some files to my database table, I am getting the following error. I am using 'Truncate' option while loading the file:
Error:
====
SQL*Loader-926: OCI error while executing delete/truncate (due to REPLACE/TRUNCATE keyword) for table LOS_STAGE_DS4
ORA-01426: numeric overflow
Here's the loader properties(excerpts from load log)
================================
SQL*Loader: Release 11.1.0.6.0 - Production on Fri Nov 26 04:54:18 2010
Copyright (c) 1982, 2007, Oracle. All rights reserved.
Control File: d:\Prod\rent_Load\Bin\rent_Load.ctl
Data File: d:\Prod\rent_Load\Data\rent.704
Bad File: d:\Prod\rent_Load\Bad\rent.704
Discard File: none specified
(Allow all discards)
Number to load: ALL
Number to skip: 0
Errors allowed: 1000000000
Bind array: 64 rows, maximum of 256000 bytes
Continuation: none specified
Path used: Conventional
Table LS_STAGE, loaded from every logical record.
Insert option in effect for this table: TRUNCATE
Column Name Position Len Term Encl Datatype
Could someone please help and advise what is the root cause of this error?
Thanks,

The root cause is in the error ora-1426, which you can look up in the online error documentation at http://tahiti.oracle.com . No one knows every error message by heart. This means it is expected you look up the error prior to posting, and you don't expect any volunteer in this forum to look up the error on your behalf.
Also this is a typical candidate for being a known problem, and known problems can be found on My Oracle Support.
Sybrand Bakker
Senior Oracle DBA

Oracle 10g: Initialization error SQL*Net not properly installed

Hello, everyone.
I have an app that uses Oracle 10g client to connect a remote Oracle 10g server.
I encountered a pop-up error saying
" Initialization error SQL*Net not properly installed. "
OracleHomeKey: SOFTWARE\ORACLE
OracleHomeDir:
Please advise a fix.
Thanks.

Maybe PL/SQL Developer is trying to use some missing registry values, or a missing ORACLE_HOME environment variable
Check the ORACLE_HOME is pointing to your 10g client path, and then try to add the following entries in the registry, making a .reg file with the following, replacing with your paths, and executing (from Windows PATH variable
[HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE]
"inst_loc"="C:
Program Files\\Oracle
Inventory"
"API"="D:\\oracle\\product\\10.1.0
db_1"
[HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\ALL_HOMES]
"HOME_COUNTER"="1"
"DEFAULT_HOME"="HOME0"
"LAST_HOME"="0"
[HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\ALL_HOMES\ID0]
"NAME"="Oracle - ORACLE_HOME"
"PATH"="D:\oracle\product\10.1.0\db_1"
"NLS_LANG"="NA"
[HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\HOME0]
"ID"="0"
"ORACLE_GROUP_NAME"="Oracle - ORACLE_HOME"
"ORACLE_HOME_NAME"="ORACLE_HOME"
"ORACLE_HOME"="D:\\oracle\\product\\10.1.0\\db_1"
I hope this help
Regards,
Alfonso Vicente

MS SQL Error SQL 137

Hi,
i encounter MS SQL Error SQL 137, what is this error ? and how to resolve this? Thanks
halim

Your question has nothing to do with this forum or indeed this website. Locked.

Getting error "SQL error in the database when accessing a table."

Hi All,
We are getting Dump Error SQL error in the database when accessing a table for the batch job EISSD/REQUISITION 14 / which includes program AQ20FD==========A2============. Please reply. The Dump error details are as follows
Short text
    SQL error in the database when accessing a table.
How to correct the error
    Database error text........: "ORA-01555: snapshot too old: rollback segment
     number 21 with name "_SYSSMU21$" too small"
    Internal call code.........: "[RSQL/FTCH/VBRK ]"
    Please check the entries in the system log (Transaction SM21).
Thanks
Padmakar Kudtarkar
Edited by: Rob Burbank on May 19, 2011 9:38 AM

The query where we are getting error in Standard program AQ20FD==========A2============ for Job
EISSD/REQUISITION 14 / is as follows:
select VBRKBUKRS VBRKFKART VBRKFKDAT VBRKFKTYP VBRKGJAHR VBRKKUNAG VBRKKUNRG VBRKKURRF VBRKVBELN VBRKWAERK VBRP~AUBEL
       VBRPAUPOS VBRPFKIMG VBRPKVGR2 VBRPKZWI1 VBRPMATNR VBRPMWSBP VBRPNETWR VBRPPSTYV VBRPVBELN VBRPVGBEL VBRP~VGPOS
       VBRPVKBUR VBRPVKGRP VBRPVRKME VBRPWAVWR
into (VBRK-BUKRS , VBRK-FKART , VBRK-FKDAT , VBRK-FKTYP , VBRK-GJAHR , VBRK-KUNAG , VBRK-KUNRG , VBRK-KURRF , VBRK-VBELN
     , VBRK-WAERK , VBRP-AUBEL , VBRP-AUPOS , VBRP-FKIMG , VBRP-KVGR2 , VBRP-KZWI1 , VBRP-MATNR , VBRP-MWSBP , VBRP-NETWR
     , VBRP-PSTYV , VBRP-VBELN , VBRP-VGBEL , VBRP-VGPOS , VBRP-VKBUR , VBRP-VKGRP , VBRP-VRKME , VBRP-WAVWR )
from ( VBRK
       inner join VBRP
       on VBRPVBELN = VBRKVBELN )
       where VBRK~BUKRS in SP$00004
         and VBRK~FKDAT in SP$00001
         and VBRK~KUNAG in SP$00002
         and VBRK~VBELN in SP$00006
         and VBRP~MATNR in SP$00003.
%dbacc = %dbacc - 1.
if %dbacc = 0.
    stop.
endif.
check SP$00004.
check SP$00001.
check SP$00002.
check SP$00006.
check SP$00003.
add 1 to %count-VBRK.
%linr-VBRK = '01'.
extract %fg01.
%ext-VBRP01 = 'X'.
    extract %fgwrVBRP01.
endselect.

Error: SQL Instance hosting an active site database, error cannot run Testdbupgrade on a SQL Instance which host an active site database.

Single Primary Site running SCCM 2012 SP1 with SQL 2008 SP3 CU14 on Windows Server 2008 SP1.
We are in process of upgrading to SCCM 2012 R2.
Ran the ConfigMgr 2012 R2 setup with the /TESTDBUPGRADE on SQL Server.
F:\SMSSETUP\BIN\X64\setup.exe /testdbupgrade
cm_bc1
Error: SQL Instance hosting an active site database, error cannot run Testdbupgrade on a SQL Instance which host an active site database.
We are using s-syscenter account which has SA rights on SQL and added as local admin.

You should run Testdbupgrade on a copy of your database (ie a backup) rather than the "live" database.
Note that you cannot upgrade a database once you have run Testdbupgrade on it.
See here for more information
http://technet.microsoft.com/en-us/library/jj865691.aspx
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Error SQL Concat FormCalc

Similar Messages

Maybe you are looking for