Error: System.Management.Automation.RemoteException: Federation information could not be received from the external organization.

Greetings.
I'm getting 2 errors and 1 warning in the Hybrid Configuration object:
INFO : Session=Tenant Cmdlet=Get-FederationInformation -DomainName 'SanJuanCiudadPatria.com' -BypassAdditionalDomainValidation: $true START
ERROR : System.Management.Automation.RemoteException: Federation information could not be received from the external organization.
INFO : Session=Tenant Cmdlet=Get-FederationInformation FINISH Time=2620.7003ms
INFO : Session=Tenant Cmdlet=Get-FederationInformation -DomainName 'SanJuanCiudadPatria.com' -BypassAdditionalDomainValidation: $true START
ERROR : System.Management.Automation.RemoteException: Federation information could not be received from the external organization.
INFO : Session=OnPrem Cmdlet=Get-OrganizationConfig START
INFO : Session=OnPrem Cmdlet=Get-OrganizationConfig FINISH Time=203.229ms
WARNING : Office 365 was unable to communicate with your on-premises Autodiscover endpoint. This is typically due to incorrect DNS or firewall configuration. The Office 365 tenant is currently configured to use the following URL for Autodiscover
queries from the Office 365 tenant to the on-premises organization - https://autodiscover.SanJuanCiudadPatria.com/autodiscover/autodiscover.svc/WSSecurity. See the following article for further information: http://go.microsoft.com/fwlink/p/?LinkId=275838
Any help would be greatly appreciated.
Hello World.

Hello,
If the IIS configuration is missing the svc-Integrated handler mapping, the issue may occur. Please try to refer to the following KB to check if the issue can be solved.
http://support.microsoft.com/kb/2626696
Please check if there is A record for autodiscover on public DNS server or DNS SRV record.
Additional blog for your reference.
http://blogs.technet.com/b/mikehall/archive/2013/08/21/office-365-insight-into-the-hybrid-configuration-wizard-part-2.aspx
Cara Chen
TechNet Community Support

Similar Messages

SQL Server 2005 Database Mail - Mail configuration information could not be read from the database.

I'm trying to setup Database Mail and send a test message, but it's not working.
I've done several step-by-steps and all and I can't get it to work. Also checked several posts in this forum but none helped. I think it used to work before (2 months ago) but we had to turn it off.
I've enabled it in Surface Configuration, have tried recreating all profiles, restarted SQL Agent, checked version mismatch...
I check the Database Mail and I get the following message:
Log Database Mail (Database Mail Log)
Log ID 152
Process ID 7684
Last Modified 3/14/2013 6:49:58 PM
Last Modified By SPEEDLING\sqlservice
Message
1) Exception Information
===================
Exception Type: Microsoft.SqlServer.Management.SqlIMail.Server.Common.BaseException
Message: Mail configuration information could not be read from the database.
Data: System.Collections.ListDictionaryInternal
TargetSite: Microsoft.SqlServer.Management.SqlIMail.Server.Objects.Account GetAccount(Int32)
HelpLink: NULL
Source: DatabaseMailEngine
StackTrace Information
===================
at Microsoft.SqlServer.Management.SqlIMail.Server.DataAccess.DataAccessAdapter.GetAccount(Int32 accountID)
at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandFactory.CreateSendMailCommand(DBSession dbSession)
at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandRunner.Run(DBSession db)
at Microsoft.SqlServer.Management.SqlIMail.IMailProcess.ThreadCallBack.MailOperation(Object o)
2) Exception Information
===================
Exception Type: System.IndexOutOfRangeException
Message: timeout
Data: System.Collections.ListDictionaryInternal
TargetSite: Int32 GetOrdinal(System.String)
HelpLink: NULL
Source: System.Data
StackTrace Information
===================
at System.Data.ProviderBase.FieldNameLookup.GetOrdinal(String fieldName)
at System.Data.SqlClient.SqlDataReader.GetOrdinal(String name)
at System.Data.SqlClient.SqlDataReader.get_Item(String name)
at Microsoft.SqlServer.Management.SqlIMail.Server.DataAccess.DataAccessAdapter.GetAccount(Int32 accountID)

I'm trying to setup Database Mail and send a test message, but it's not working.
I've done several step-by-steps and all and I can't get it to work. Also checked several posts in this forum but none helped. I think it used to work before (2 months ago) but we had to turn it off.
I've enabled it in Surface Configuration, have tried recreating all profiles, restarted SQL Agent, checked version mismatch...
I check the Database Mail and I get the following message:
Log
Database Mail (Database Mail Log)
Log ID
152
Process ID
7684
Last Modified
3/14/2013 6:49:58 PM
Last Modified By
SPEEDLING\sqlservice
Message
1) Exception Information
===================
Exception Type: Microsoft.SqlServer.Management.SqlIMail.Server.Common.BaseException
Message: Mail configuration information could not be read from the database.
Data: System.Collections.ListDictionaryInternal
TargetSite: Microsoft.SqlServer.Management.SqlIMail.Server.Objects.Account GetAccount(Int32)
HelpLink: NULL
Source: DatabaseMailEngine
StackTrace Information
===================
at Microsoft.SqlServer.Management.SqlIMail.Server.DataAccess.DataAccessAdapter.GetAccount(Int32 accountID)
at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandFactory.CreateSendMailCommand(DBSession
dbSession)
at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandRunner.Run(DBSession db)
at Microsoft.SqlServer.Management.SqlIMail.IMailProcess.ThreadCallBack.MailOperation(Object o)
2) Exception Information
===================
Exception Type: System.IndexOutOfRangeException
Message: timeout
Data: System.Collections.ListDictionaryInternal
TargetSite: Int32 GetOrdinal(System.String)
HelpLink: NULL
Source: System.Data
StackTrace Information
===================
at System.Data.ProviderBase.FieldNameLookup.GetOrdinal(String fieldName)
at System.Data.SqlClient.SqlDataReader.GetOrdinal(String name)
at System.Data.SqlClient.SqlDataReader.get_Item(String name)
at Microsoft.SqlServer.Management.SqlIMail.Server.DataAccess.DataAccessAdapter.GetAccount(Int32 accountID)

Error: ORA-16796: one or more properties could not be imported from the dat

DGMGRL> CREATE CONFIGURATION prod as
PRIMARY DATABASE IS prod
CONNECT IDENTIFIER IS prod;Configuration "prod" created with primary database "prod"
DGMGRL> ADD DATABASE standby as
CONNECT IDENTIFIER IS standby
MAINTAINED AS PHYSICAL;Error: ORA-16796: one or more properties could not be imported from the database
Failed.
DGMGRL> ADD DATABASE standby as
CONNECT IDENTIFIER IS standby
MAINTAINED AS PHYSICAL;Error: ORA-16796: one or more properties could not be imported from the database
Failed.
can any one help me out , i am not sure what could be the problem.
i checked the listner and tnsnames every thing looks good, if u want me to post any thing else plz do let me know
thanks
firdous

16796, 0000, "one or more properties could not be imported from the database"
// *Cause: The broker was unable to import property values for the database
//          being added to the broker configuration. This error indicates:
//          - The Oracle Net service name specified in DGMGRL CREATE
//            CONFIGURATION or ADD DATABASE command was not one that provides
//            access to the database being added.
//          - There were no instances running for the database being added.
// *Action: Remove the database from the configuration using the REMOVE
//          CONFIGURATION or REMOVE DATABASE command. Make sure that the
//          database to be added has at least one instance running and that the
//          Oracle Net service name provides access to the running instance.
//          Also check the broker log file for additional information.
//          Then, reissue the CREATE CONFIGURATION or ADD DATABASE command.

Error: The report source could not be retrieved from the state object.

I have been trying to create a report in a JSF page. The relevant parts are below:
Inside the JSP page, this is the code:
              <jsp:useBean id="MyBean" class="com.nm.facade.rto.POJOViewerBean" scope="session" />
                <jsp:setProperty name="MyBean" property="reportLocation" value="Report1.rpt" />
               <v:reportPageViewer reportSource="#{MyBean.reportSource}"
                                       displayToolbarPrintButton="true"
                                       printMode="ActiveX"
                                       zoomPercentage="100"
                                       displayToolbarExportButton="true"
                                       displayToolbarRefreshButton="true"
                                       viewerName="My Viewer"
               ></v:reportPageViewer>
In the backing bean, this is the relevant code:
    public Object getReportSource() throws ReportSDKException
        if (propertiesChanged || reportSource == null)
            propertiesChanged = false;
            if (reportLocation == null)
                throw new RuntimeException("The reportLocation property must be set before a report source is retrieved");
            ReportClientDocument rcd = new ReportClientDocument();
            rcd.setReportAppServer(ReportClientDocument.inprocConnectionString);
            rcd.open(reportLocation, 0);
            DatabaseController dbc = rcd.getDatabaseController();
            //Create the POJO collection and populate it with data
            ReportData[] data =
              new ReportData("B.B.", "King", 6, new Date(25, 9, 16)),
                new ReportData("Muddy", "Waters", 7, new Date(15, 4, 4)),
                new ReportData("John Lee", "Hooker", 8, new Date(16, 8, 16)),
                new ReportData("Otis", "Rush", 9, new Date(34, 4, 29)),
                new ReportData("Buddy", "Guy", 10, new Date(36, 7, 30))
            //Create the result set from the collection of POJOs
            POJOResultSetFactory factory = new POJOResultSetFactory(ReportData.class);
            factory.setVerbose(true);
            POJOResultSet results = factory.createResultSet(data);
            ResultSetMetaData metaData = results.getMetaData();
            //Set the resultset as the report datasource
                  //Get the table name from the 'Set Datasource Location' dialog in the Crystal Reports designer
            String reportTable = "getReportDataDataSource";
            dbc.setDataSource(results, reportTable, reportTable);
            IReportSource reportSource = rcd.getReportSource();
            if (reportSource == null)
                throw new RuntimeException("Unable to get a report source.");
        return reportSource;
In the CRConfig.xml, this is what is there:
<?xml version="1.0" encoding="utf-8"?>
<CrystalReportEngine-configuration>
    <reportlocation>../reports</reportlocation>
    <timeout>0</timeout>
    <ExternalFunctionLibraryClassNames>
         <classname></classname>
    </ExternalFunctionLibraryClassNames>
</CrystalReportEngine-configuration>
The report template 'Report1.rpt' is packaged under WEB-INF/reports in the war file.
When I try to generate the report by accessing the JSF page, I am getting an error: "The report source could not be retrieved from the state object. "
I am not sure what is wrong. Can someone help me in resolving this issue?
Edited by: renshai on Jul 9, 2009 3:21 AM

My formatting gets lost and the message looks unintelligible. After some experimentation, I found that if the message exceeds some length, the formatting is removed. Since I couldn't find any way to delete this post, I made another post with the same subject. Please ignore this post and help me to find a solution for the problem posted in the other thread with the same subject. Thanks in advance.

The procedure entry point GetLogicalProcessor Information could not be located in the dynamic link library KERNEL32.dll

When I installed CS6 trial version and started from start menu and clicked Adobe photoshop CS6, I get this message.
The procedure entry point GetLogicalProcessor Information could not be located in the dynamic link library KERNEL32.dll
How to resolve it?

Either your OS is damaged, or doesn't meet the minimum requirements for Photoshop CS6.

Error: Page Metadata could not be obtained from the Portal database.

Hi,
Maybe some one can help me with this.
After my installation (oas portal 10.1.4) I changed my URL in portal and sso.
modplsql : http://<webserver>:<port>/pls/portal/htp.p?cbuf=test --> its working fine. I got test
Parallel Page Engine (PPE) : http://<webserver>:<port>/portal/page --> its working fine. I got PPE is working.
http://login.hostname:port/oiddas --> It`s working fine
http://login.hostname:port/sso --> It`s working fine
http://hostname:port/portal/page/portal/TOPLEVELSITE --> It's not working I got in firefox Error: Page Metadata could not be obtained from the Portal database. In explorer i got HTTP 500 error.
I checked my application.log and I got this:
**portal: id=45342345678,1 ContentFetcher Unexpected Exception Request Failed:oracle.webdb.dispatcher.DispatcherException: I/O Error dispatching request name=content-fetcher19 label=pageMeta url=http://<webserver>:port/portal/pls/portal/!PORTAL.wwpob_page.show/TOPLEVELSITE time=1ms timeout=60000ms process=Dispatching**
Maybe some one can help me to solve this threat.
Thank you.

C@rlitos wrote:Edited by: C@rlitos on Sep 30, 2009 6:14 PM
Hi!!
To register the url in portal I used this doc 434795.1 - 558634.1 from metalink.
http://download-west.oracle.com/docs/cd/B14099_17/core.1012/b13998/variants.htm#CBDBDJHD
I verified and i got this:
LSNR_TOKEN
SITE_TOKEN
SITE_ID
LS_LOGIN_URL
URLCOOKIE_VERSION
ENCRYPTION_KEY
ENCRYPTION_MASK_PRE
ENCRYPTION_MASK_POST
U
oldurl.com:7781
XY776FQWDCY4EFF
8AC54EFF
http://oldurl.com:7780/pls/orasso/orasso.wwsso_app_admin.ls_login
v1.2
2FWERFW768767866
6B4DEERWF87W87897E89WRF897W3FC9
F0FEC6AREW76786WEFWER76F8968695
N
newurl.com
1RG8IYA4F9D2E30A
F9D2E233A
http://newurl.com/pls/orasso/orasso.wwsso_app_admin.ls_login
v1.2
B32852345661513F0
1A5DTR546EYEYEHEHSVSGFB44C
A33RTWERGERGERGREFWERF8
N
I havent create new token values.
Edited by: C@rlitos on Sep 30, 2009 6:14 PMHave you configured your Infra with a new hostname on a different port ?
Unless, you had installed your OAS with custom ports, and have not used the default ports for the components, your lsnr_token for the newurl has a problem. orasso and sso should be configured at 7777, and by default they configure at that port. That means that your newURL should be pointing to http://newurl.com:7777/pls/orasso/orasso.wwsso_app_admin.ls_login for the ls_login_url.
This might have happened due to some error in registering your portal with the SSO. Have you used custom ports for your installations?
Additionally, did you configure your newurl on port 80?

Error -89120 Source terminal to be routed could not be found on the device

Dear All,
I am generating a pulse train using a 6602 card on Ctr0. I use Ctr1 to read the number of counts from the 80MHz source gated by this Ctr0.
I get an error when starting the Counting process on Ctr1 when calling the DAQmxStartTask function:
error -89120 Source terminal to be routed could not be found on the device.
I start Ctr0 without any problem, by using the StartPulseGeneration (see below), but I get into trouble for the second stage, when reading counter1.
Here is my code. Thank you in advance for your help.
Private Sub StartPulseGeneration ()
    ' Create the DAQmx task.
    DAQmxErrChk DAQmxCreateTask("", taskHandle)
    'Create Counter Channel for pulse generation
    DAQmxCreateCOPulseChanFreq(taskHandle, “Dev1/ctr0”, "coChannel", DAQmx_Val_FrequencyUnits2_Hz, DAQmx_Val_Level1_Low, 0#, 200, (dutyCycle / 100))
    'Specify continuous timing
    DAQmxCfgImplicitTiming(taskHandle, DAQmx_Val_AcquisitionType_ContSamps, 100)
    'Start generating the pulse train
    DAQmxStartTask (taskHandle)
End Sub
Private Sub StartCounting()
    DAQmxCreateTask("", taskHandleTS)
    DAQmxCreateCICountEdgesChan(taskHandleTS, "Dev1/ctr1", "mychan", _
DAQmx_Val_Edge1_Rising, 0, DAQmx_Val_CountDirection1_CountUp)
    DAQmxCfgSampClkTiming(taskHandleTS, "/Dev1/Ctr0InternalOutput", 1, DAQmx_Val_Rising, _DAQmx_Val_AcquisitionType_ContSamps, 10000)
    DAQmxSetCICountEdgesTerm(taskHandleTS, "Dev1/ctr1", "/Dev1/80MHz Timebase")
    DAQmxStartTask(taskHandleTS)
End Sub

Hi Atacama,
I noticed you have posted the same question on this thread: http://forums.ni.com/ni/board/message?board.id=40&message.id=4210
For simplicity I will put all posts on the other thread.
Regards
Jon B
Applications Engineer
NI UK & Ireland

HT1386 Receiving phone cannot be synced unknown error 1150 secure link failed I phone could not be found on the network. ??? Synced fine Sep 6...anyone else have this happen ??

I've been trying to sync all day, it's never done this, Receive either I phone could not be found on the network or Secure link 1150 failed. Have not changed ANYTHING on my computer. Windows 7 64 bit. When I do the Control Panel / System & security / windows firewal / advanced settings / inbound rules / new rule program / this program path / PROGRAM FILES ITUNES OPEN is not there....what do I do ?? Will not sync from computer to phone my phone is listed under devices HELP !!

Is there a way for you to disable the firewall and your anti-virus software? That should help.

TS1368 Error message accessing iTunes store: "Your request could not be completed. The item you've requested is not currently available in the U.S. store."???

After updating my iTunes to the newest I cannot access iTunes store.
When I pess the button "iTunes Store" I get the message: "Your request could not be completed. The item you've requested is not currently available in the U.S. store." Does anybody know what's going on???

I have this issue too. I sent an email and got a link to visit the community and find my answer here. I'm NOT happy with the email I got. I've been able to see my appleid and then click on Music or Movies but I cannot go to the home screen of the Store. This is obviously something they will have to do an update for. We aren't the only ones with this same issue. I've seen more than one question/subject about this same thing.

We bought a reconditioned IMac and time capsule,about a month ago the hard drive died and only left our files on the capsule which could not be retrieved from the time capsule so it got stored as a file on the operating system

Our IMac's hard drive died and we thought great we bought a time capsule to back up the immages and files,except when we had the hard drive replaced the time capsule did not recognize the newer opperating system and would not reboot the files back,so the apple store tech loaded them into a file folder and loaded them to the main screen and erased the time capsule,the problem now is how to load this file back permenantly and watch video's that are stored,when in I Photo when I try to view video content I get a message stating that I may need to download more software to support this format.

If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

I am getting a sync error between iphone and Outlook 2007: ITunes could not sync calendars to the iphone because the sync server failed to sync the iphone. How can I fix this?

I have the "sync calendars" checked.
This happens about every three months and drives me crazy!
I have a 2G iphone on T-Mobile.

i use outlook for my work email, but my personal email is in gmail. besides work email, i do not use outlook at all.
i get my work email on my iPhone, but i do not sync calendars and contacts as i have to use an imap connection for work, and this does not allow for calendar or contact syncing.
i have seen a gmail/outlook sync tool, but i am afraid i do not use it so i can not offer any help with it.
Message was edited by: Sboq

My laptop seemed to be frozen and I could not shut down from the menu. I held the power button for a long time and finally it shut off. When I started it again it turned on to show a black screen with an icon of a file folder with a question mark inside

Any idea what a blank screen with a flashing folder with a question mark inside of it means???

Ambinder55,
it means that the forced shutdown corrupted some portion of the internal disk’s filesystem. Which version of OS X is installed on your MacBook Pro?

HT2305 I just purchased a PC with Windows 8, I could not transfer data from the old computer, what steps do I take to be able to sync my IPhone to my new computer.

I plugged my Iphone in but the phone is apparently not identified. Where do I get and how do I install Apple Software to accomplish keeping my phone up to date and synced?

Yes, windows to Mac too.
iTunes: How to move [or copy] your music [library] to a new computer [or another drive] - http://support.apple.com/kb/HT4527
Quick answer if you use iTunes' default preferences settings: Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive. Open iTunes and immediately hold down the Option (alt) key (shift on Windows), then guide it to the new location of the library.
Windows users see tip at: https://discussions.apple.com/message/18879381

System.Management.Automation.MethodInvocationException: Exception calling "ExecuteQuery" with "0" argument(s): "$Resources:core,ImportErrorMessage;" --- Microsoft.SharePoint.Client. ServerException: $Resources:core,ImportErrorMessage;

Hi,
I am getting an error System.Management.Automation.MethodInvocationException: Exception calling "ExecuteQuery" with "0" argument(s): "$Resources:core,ImportErrorMessage;" ---> Microsoft.SharePoint.Client. ServerException:
$Resources:core,ImportErrorMessage;
Following is my powershell script on line
$context.ExecuteQuery(); it is throwing this error.
function AddWebPartToPage([string]$siteUrl,[string]$pageRelativeUrl,[string]$localWebpartPath,[string]$ZoneName,[int]$ZoneIndex)
try
#this reference is required here
$clientContext= [Microsoft.SharePoint.Client.ClientContext,Microsoft.SharePoint.Client, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c]
$context=New-Object Microsoft.SharePoint.Client.ClientContext($siteUrl)
write-host "Reading file " $pageRelativeUrl
$oFile = $context.Web.GetFileByServerRelativeUrl($pageRelativeUrl);
$limitedWebPartManager = $oFile.GetLimitedWebPartManager([Microsoft.Sharepoint.Client.WebParts.PersonalizationScope]::Shared);
write-host "getting xml reader from file"
$xtr = New-Object System.Xml.XmlTextReader($localWebpartPath)
[void] [Reflection.Assembly]::LoadWithPartialName("System.Text")
$sb = new-object System.Text.StringBuilder
while ($xtr.Read())
$tmpObj = $sb.AppendLine($xtr.ReadOuterXml());
$newXml = $sb.ToString()
if ($xtr -ne $null)
$xtr.Close()
#Add Web Part to catalogs folder
write-host "Adding Webpart....."
$oWebPartDefinition = $limitedWebPartManager.ImportWebPart($newXml);
$limitedWebPartManager.AddWebPart($oWebPartDefinition.WebPart, $ZoneName, $ZoneIndex);
$context.ExecuteQuery();
write-host "Adding Web Part Done"
catch
write-host "Error while 'AddWebPartToPage'" $_.exception| format-list * -force
ERROR:
Error while 'AddWebPartToPage' System.Management.Automation.MethodInvocationException: Exception calling "ExecuteQuery" with "0" argument(s): "$Resources:core,ImportErrorMessage;" ---> Microsoft.SharePoint.Client.
ServerException: $Resources:core,ImportErrorMessage;
at Microsoft.SharePoint.Client.ClientRequest.ProcessResponseStream(Stream responseStream)
at Microsoft.SharePoint.Client.ClientRequest.ProcessResponse()
at Microsoft.SharePoint.Client.ClientContext.ExecuteQuery()
at ExecuteQuery(Object , Object[] )
at System.Management.Automation.DotNetAdapter.AuxiliaryMethodInvoke(Object target, Object[] arguments, MethodInformation methodInformation, Object[] originalArguments)
--- End of inner exception stack trace ---
at System.Management.Automation.DotNetAdapter.AuxiliaryMethodInvoke(Object target, Object[] arguments, MethodInformation methodInformation, Object[] originalArguments)
at System.Management.Automation.DotNetAdapter.MethodInvokeDotNet(String methodName, Object target, MethodInformation[] methodInformation, Object[] arguments)
at System.Management.Automation.Adapter.BaseMethodInvoke(PSMethod method, Object[] arguments)
at System.Management.Automation.ParserOps.CallMethod(Token token, Object target, String methodName, Object[] paramArray, Boolean callStatic, Object valueToSet)
at System.Management.Automation.MethodCallNode.InvokeMethod(Object target, Object[] arguments, Object value)
at System.Management.Automation.MethodCallNode.Execute(Array input, Pipe outputPipe, ExecutionContext context)
at System.Management.Automation.ParseTreeNode.Execute(Array input, Pipe outputPipe, ArrayList& resultList, ExecutionContext context)
at System.Management.Automation.StatementListNode.ExecuteStatement(ParseTreeNode statement, Array input, Pipe outputPipe, ArrayList& resultList, ExecutionContext context)

Thanks Sethu for your comments. However i am running this powershell directly on server so believe
SharePointOnlineCredentials is not required.
I have tried it but still giving me same error

Status 51 -- Error: LK047 Material movement could not be posted in the sys

I am trying to create an article document (goods movement doc) for an already created purchase order.
but this is via an IDOC (WMMBXY). after filling the data in WE19, i shoot the idoc in to the system. in we02 i get the following error message (status 51): LK047 Material movement could not be posted in the system . Can someone please help.
the following fields are filled:
Segment: E1MBXYH
Document date 20091124
Posting date 20091124
Reference 9999999999
Doc.Header Text POS/1110
Transaction code MB01
USNAM user12
Segment: E1MBXYI
Processing ind. 1
Material 832924
Plant 1110
Movement Type 101
Debit/Credit +
Currency EUR
Qty in un.entry 250
Unit of Entry PAK
Qty OPUn 90
OrdPriceUnit KG
Purchasing Doc. 9100000141
Item 1
Profit Center 11090
G/L Account 22706
Movement Type 101
SLED/BBD 20091231

Hello Shankar,
Glad to hear from you!
In your question, please make sure you use leading zeros for the MATNR field. In header segment field E1MBXYH-BKTXT, we use header text. Hope you are using inbound posting function L_IDOC_INPUT_WMMBXY.
Please try with this and it works for us.
Thanks a lot,
Venu

Error: System.Management.Automation.RemoteException: Federation information could not be received from the external organization.

Similar Messages

Maybe you are looking for