Error - The deployment cannot use the ReservedIP Name that belongs to a region.

hi experts,
I created a ReservedIP in North Central US. IF i deploy a project containing below config on anexisting Cloud
Service in North Central US it gives error. 
<NetworkConfiguration>
    <AddressAssignments>
      <ReservedIPs>
        <ReservedIP name="name"/>
      </ReservedIPs>
    </AddressAssignments>
  </NetworkConfiguration>
it is throwing this error after uploading to the portal
"The deployment cannot use the ReservedIP name that belongs to a region."
But then if i try creating a new cloud service from scratch and deploying it works fine. Can you let us know what might be the issue with the old cloud service. The old Cloud service also shows North Central US
With Regards,
Amit
With Regards, Amit

Hi,
As far as I know, the reserved IP is belong to azure IP space, You can enable all azure services to access your database (which whitelists the whole azure IP space, essentially), if you set azure service to true, I think it is unnecessary to set allow IP
address.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

  • Why am I getting error "The deployment cannot use the VirtualNetwork MyProjectVN that belongs to a region."?

    I have a Virtual Network configured in Azure with Site-2-Site VPN, it works fine and connects to our on premise VPN network.
    I have a web role that I would like to deploy into this VN. I have two cloud configurations, DEV and TEST, both are deployed to their own designated cloud service instance.
    Previously, only the DEV configuration was published to the VN, and it worked properly without any problems. However, today I also wanted to publish the TEST environment into the VN, but I get the error message "The deployment cannot use the VirtualNetwork
    MyProjectVN that belongs to a region.".
    What can be the reason for this? I didn't choose any regions when setting up the VN, and both cloud service instances are in the North Europe location.

    Hi Mark,
    Based on my research, I haven't found any related official documents indicate this kind of difference between Staging and Production. Accroding to the error message, you can create a virtual network within an affinity group to see if the issue persists.
    In addition, since it is related to Web roles, you can also ask in the forum below for assistance:
    https://social.msdn.microsoft.com/Forums/en-US/home?forum=windowsazuredevelopment
    Best regards,
    Susie
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • How to solve this error 'This package is using an app name that hasn't been reserved for this app: "Matest"

    i already reserved app name as Ma_Test. But only one error showing "This package is using an app name that hasn't been reserved for this app: "Matest". how to solve?

    Hello,
    You need to make sure both names match exactly

  • I have installed the new up to date itunes which i can open on my PC, however when i connect my ipad or iphone i get an error saying i cannot use the device as the require software isn't installed?? I'm very confused please help......

    I have installed the new up to date itunes which i can open on my PC, however when i connect my ipad or iphone i get an error saying i cannot use the device as the require software isn't installed?? I'm very confused please help......

    Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
    (If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
    Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
    If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

  • I cannot utilize my Adobe documents - I get this error message - "You cannot use this product at this time.  You must repair the problem by uninstalling and then reinstalling this product or contacting your IT administrator or Adobe customer support for h

    I cannot utilize my Adobe documents - I get this error message - “You cannot use this product at this time.  You must repair the problem by uninstalling and then reinstalling this product or contacting your IT administrator or Adobe customer support for help.”

    Thank you!  My solution was different.  I had turned off services in MSCONFIG and did not turn them back on.  After I turned services back on, Acrobat started  working again without the nag error and impedance to use the program.  I appreciate your input!  Adobe customer service/tech support was dismally disappointing.

  • Cannot use duplicate table name error in AMDP

    Hi Experts,
    I'm developing an application which has the following architecture
    SAP UI5->Gateway->ABAP Managed DB procedures(AMDP)->HANA SP(Stored Procedure)
    We are having a very peculiar problem where the gateway service works inconsistently for the same input data.
    i.e If I execute the same service n number of times, I get the results successfully for say n-3 times but the other 3 times I get a "RFC Error :Error while executing Database procedure"
    There is no change in the input data or DB table data during all the executions.
    Running the stored procedure stand alone in HANA studio works all the time.
    We tried executing the AMDP from SE24 and the same behavior occurred.
    When trouble shooting we found that the exception occurs inside the AMDP when the call db procedure statement is executed.
    Could you please advise what could be the possible reason for this any tuning parameter/unavailability of db connections?
    Or could you please suggest some other troubleshooting mechanism by which we can zero in on the cause?
    When I go in the debug mode I can see the exact error as
    cannot use duplicate table name:  [288] SAPXXX.ZCL_PLAN_MAINTENANCE=>GET_COMP_TYPE#stub#20140905055908: line 15 col 3 (at pos 492): cannot use duplicate table name exception:
    where ZCL_PLAN_MAINTENANCE=>GET_COMP_TYPE is the AMDP class and method. SAPXXXis the schema.

    I reported this to Adobe customer support on 11/29, and here is their response:
    Wednesday, December 5, 2007 12:51:27 PM PST
    Hello John,
    Thank you for contacting Adobe® Web Support for assistance with Adobe
    Photoshop Elements® 6.0.
    I understand that images are deleted if you accidentally try to move
    them to a folder that already includes a file of the same name.
    Thank you for bringing this to our attention. I was able to replicate
    this behavior as well. The best method to report errors of this nature
    is using the following form on our website:
    http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
    I will report this to the product team through my channels. You may want to submit this issue through the web form as it goes directly to the product development team.
    I hope this information helps to resolve your issue. If you require
    further assistance with this issue, please update your web case with
    complete details, including what steps you have applied and any error
    messages you are receiving.
    You may also call Technical Support at (800) 642-3623. We are available from 6:00 am to 5:00 pm Monday - Friday, Pacific Time.
    Kind regards,
    Alan C.
    Adobe Web Support

  • # The Application Name that you provided has already been used.

    "# The Application Name that you provided has already been used. Please provide a unique Application Name."
    Anyone else getting this when trying to update their apps description on iTunes Connect?

    I get this error, too, and have been getting it since my app launched (about 2 weeks ago). My first email to [email protected] was met with a "We're working on it" reply, but they have been ignoring me since. Pretty frustrating.

  • The DNS name that you specified is already in use.

    Hi,
    I am a new in Windows Azure. Can You help me please?
    When I try to create new VM and input samething in DNS box, I get this message "The DNS name that you specified is already in use."
    I have tried many random texts, but without success.
    Pls help me.
    Thank You

    Hi 
    In some regions, existing storage accounts cannot be used to create virtual machines. It would be best to create a new one in the region that you want the VM in.
    As you tried creating a VM, a cloud service would have been created using the dns name that you specified. Take a look at the Cloud Services tab and then delete the appropriate service. This should free up the dns name and you should be able to reuse it.
    You might have to wait for the dns name to free up after the cloud service has been deleted though.

  • Error: "The file name needs to be specified for all documents."

    Hello
    I am trying to make sendDocument api call with the following xml:
    <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns0="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="http://dto.api.echosign" xmlns:ns2="http://api.echosign" xmlns:ns3="http://dto14.api.echosign" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <SOAP-ENV:Header/>
    <ns0:Body>
    <ns2:sendDocument>
    <ns2:apiKey>content filtered</ns2:apiKey>
    <ns2:senderInfo xsi:nil="true"/>
    <ns2:documentCreationInfo>
    <ns1:fileInfos>
    <ns1:file>CONTENT FILTERED</ns1:file>
    <ns1:fileName>test.pdf</ns1:fileName>
    <ns1:mimeType>application/pdf</ns1:mimeType>
    </ns1:fileInfos>
    <ns1:name>Test.pdf</ns1:name>
    <ns1:recipients>
    <ns3:email>[email protected]</ns3:email>
    <ns3:role/>
    </ns1:recipients>
    <ns1:reminderFrequency>DAILY_UNTIL_SIGNED</ns1:reminderFrequency>
    <ns1:signatureFlow>SENDER_SIGNS_ONLY</ns1:signatureFlow>
    <ns1:signatureType>ESIGN</ns1:signatureType>
    </ns2:documentCreationInfo>
    </ns2:sendDocument>
    </ns0:Body>
    </SOAP-ENV:Envelope>
    Which gives me an error: 'The file name needs to be specified for all documents'. Why does it happen? I specified the file name.

    I think you need to fix the recipient section, it looks incomplete. Use a tool like SoapUi to build and execute requests to the service.
    and/or the sample request in the documentation:https://secure.echosign.com/static/apiv19/sampleXml/sendDocument-request.xml

  • Name Error: The domain name does not exist

    Hi,
    I get this error when I try to create a view inside a web dynpro from se80 transaction
    " Name Error: The domain name does not exist. "
    Can anyone help me to solve this error ?
    Thanks !!

    Hi,
    did you carry out the necessary <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/43/e86de5008b4d9ae10000000a155369/frameset.htm">configuration</a> in your system? Note especially the need for fully qualified domain names (FQDN): <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/67/be9442572e1231e10000000a1550b0/frameset.htm">FQDN</a>
    Regards, Heidi

  • Secure zone - ERROR: The payment gateway that you are using does not support recurring payments

    So I want to sell a product that is made up of 4 downloadable products. (Totalling ~ 200meg)
    The only way I have found is to sell membership to a secure area where the files are linked.
    When I create the secure zone, I want a one-time-fee, but the system says:
    "ERROR: The payment gateway that you are using does not support recurring payments"
    The payment isn't recurring!
    Micah

    "Note that you have to use seamless gateway to process such payments."
    Right, but that's the problem, we're not usiong a seamless gateway and thus we get the error.  Again, the system should note that we're doing a one-time charge and not throw the seamless gateway error.
    Micah

  • One user unable to login to OWA - error :" The user name or password that you entered is not valid. Try entering it again." exchange 2007 SP3

    Hello Guys,
    exchange 2007 SP3
    windows 2008 r2 
    we have one user who unable to login to owa with error -"The user name or password that you entered is not valid. Try entering it again."
    we checked mailbox feature in EMC and owa is enable 
    checked adsiedit - looks good
    we checked allow inheritance - checked
    we reset the password and try to login to owa from exchange server , no luck
    user can login to her computer and outlook without any issue
    we also moved her mailbox to another server 
    user facing the same issue from office and VPN 
    any suggestion ?
    Thanks
    Sandip
    sandip

    Hello Lynn
    thanks for the reply. but I already checked that and allow inheritance already checked .
    when user unable to access webmail with error "The user name or password that you entered is not valid"
    will it generate any event id on exchange server or domain controller ?
    in our case we have mailbox and CAS on different servers 
    any suggestion .
    Regards 
    Sandip
    sandip

  • Found Error FRM-13008 Cannot find JaveBean with name oracle.forms.webutil.o

    Create new form attached libraies WEBUTIL and Open webutil.old
    drag WEBUTILCONFIG and WEBUTIL then create datablock,canvas WEBUTIL_CANVAS I double click canvas alert Found Error FRM-13008 Cannot find JaveBean with name oracle.forms.webutil.o
    How to solve problem
    Please Urgent
    Thank you

    formsweb.cfg
    ific, named configuration (see below)
    [default]
    # System parameter: default base HTML file
    baseHTML=webutilbase.htm
    baseHTML=base.htm
    baseHTMLjinitiator=webutiljini.htm
    baseHTMLjpi=webutiljpi.htm
    workingDirectory=
    envFile=default.env
    escapeparams=true
    # System parameter: base HTML file for use with JInitiator client
    baseHTMLjinitiator=basejini.htm
    # System parameter: base HTML file for use with Sun's Java Plug-In
    baseHTMLjpi=basejpi.htm
    # System parameter: delimiter for parameters in the base HTML files
    HTMLdelimiter=%
    # System parameter: working directory for Forms runtime processes
    # WorkingDirectory defaults to <oracle_home>/forms if unset.
    # System parameter: file setting environment variables for the Forms runtime processes
    envFile=default.env
    # Forms runtime argument: whether to escape certain special characters
    # in values extracted from the URL for other runtime arguments
    # Forms runtime argument: which form module to run
    form=test.fmx
    # Forms runtime argument: database connection details
    userid=
    # Forms runtime argument: whether to run in debug mode
    debug=no
    # Forms runtime argument: host for debugging
    host=
    # Forms runtime argument: port for debugging
    port=
    # Other Forms runtime arguments: grouped together as one parameter.
    # These settings support running and debugging a form from the Builder:
    otherparams=buffer_records=%buffer% debug_messages=%debug_messages% array=%array% obr=%obr% query_only=%query_only% quiet=%quiet% render=%render% record=%record% tracegroup=%tracegroup% log=%log% term=%term%
    # Sub argument for otherparams
    buffer=no
    # Sub argument for otherparams
    debug_messages=no
    # Sub argument for otherparams
    array=no
    # Sub argument for otherparams
    obr=no
    # Sub argument for otherparams
    query_only=no
    # Sub argument for otherparams
    quiet=yes
    # Sub argument for otherparams
    render=no
    # Sub argument for otherparams
    record=
    # Sub argument for otherparams
    tracegroup=
    # Sub argument for otherparams
    log=
    # Sub argument for otherparams
    term=
    # HTML page title
    pageTitle=Oracle Application Server Forms Services
    # HTML attributes for the BODY tag
    HTMLbodyAttrs=
    # HTML to add before the form
    HTMLbeforeForm=
    # HTML to add after the form
    HTMLafterForm=
    # Forms applet parameter: URL path to Forms ListenerServlet
    serverURL=/forms/lservlet
    # Forms applet parameter
    codebase=/forms/java
    # Forms applet parameter
    imageBase=DocumentBase
    # Forms applet parameter
    width=2000
    # Forms applet parameter
    height=800
    # Forms applet parameter
    separateFrame=false
    # Forms applet parameter
    splashScreen=
    # Forms applet parameter
    background=
    # Forms applet parameter
    lookAndFeel=Oracle
    # Forms applet parameter
    colorScheme=teal
    # Forms applet parameter
    logo=no
    # Forms applet parameter
    restrictedURLparams=HTMLbodyAttrs,HTMLbeforeForm,pageTitle,HTMLafterForm,log,allow_debug,allowNewConnections
    # Forms applet parameter
    formsMessageListener=
    # Forms applet parameter
    recordFileName=
    # Forms applet parameter
    serverApp=default
    # Forms applet archive setting for JInitiator
    archive_jini=frmall_jinit.jar
    # Forms applet archive setting for other clients (Sun Java Plugin, Appletviewer, etc)
    archive=frmall.jar
    # Number of times client should retry if a network failure occurs. You should
    # only change this after reading the documentation.
    networkRetries=0
    # Page displayed to Netscape users to allow them to download Oracle JInitiator.
    # Oracle JInitiator is used with Windows clients.
    # If you create your own page, you should set this parameter to point to it.
    jinit_download_page=/forms/jinit/us/jinit_download.htm
    # Parameter related to the version of JInitiator
    jinit_classid=clsid:CAFECAFE-0013-0001-0022-ABCDEFABCDEF
    jinit_exename=jinit.exe#Version=1,3,1,22
    # Parameter related to the version of JInitiator
    jinit_mimetype=application/x-jinit-applet;version=1.3.1.22
    # Page displayed to users to allow them to download Sun's Java Plugin.
    jpi_download_page=http://java.sun.com/products/archive/j2se/1.4.2_06/index.html
    # Parameter related to the version of the Java Plugin
    jpi_classid=clsid:CAFEEFAC-0014-0002-0006-ABCDEFFEDCBA
    # Parameter related to the version of the Java Plugin
    jpi_codebase=http://java.sun.com/products/plugin/autodl/jinstall-1_4_2-windows-i586.cab#Version=1,4,2,06
    # Parameter related to the version of the Java Plugin
    jpi_mimetype=application/x-java-applet;jpi-version=1.4.2_06
    # EM config parameter
    # Set this to "1" to enable Enterprise Manager to track Forms processes
    em_mode=0
    # Single Sign-On OID configuration parameter
    oid_formsid=%OID_FORMSID%
    # Single Sign-On OID configuration parameter
    oracle_home=C:\DevSuiteHome_1
    # Single Sign-On OID configuration parameter
    formsid_group_dn=%GROUP_DN%
    # Single Sign-On OID configuration parameter: indicates whether we allow
    # dynamic resource creation if the resource is not yet created in the OID.
    ssoDynamicResourceCreate=true
    # Single Sign-On parameter: URL to redirect to if ssoDynamicResourceCreate=false
    ssoErrorUrl=
    # Single Sign-On parameter: Cancel URL for the dynamic resource creation DAS page.
    ssoCancelUrl=
    # Single Sign-On parameter: indicates whether the url is protected in which
    # case mod_osso will be given control for authentication or continue in
    # the FormsServlet if not. It is false by default. Set it to true in an
    # application-specific section to enable Single Sign-On for that application.
    ssoMode=false
    # The parameter allow_debug determines whether debugging is permitted.
    # Administrators should set allow_debug to "true" if servlet
    # debugging is required, or to provide access to the Forms Trace Xlate utility.
    # Otherwise these activities will not be allowed (for security reasons).
    allow_debug=false
    # Parameter which determines whether new Forms sessions are allowed.
    # This is also read by the Forms EM Overview page to show the
    # current Forms status.
    allowNewConnections=true
    # EndUserMonitoring
    # EndUserMonitoringEnabled parameter
    # Indicates whether EUM/Chronos integration is enabled
    EndUserMonitoringEnabled=
    # EndUserMonitoringURL
    # indicates where to record EUM/Chronos data
    EndUserMonitoringURL=
    [sepwin]
    separateFrame=True
    lookandfeel=Generic
    # Example Named Configuration Section
    # Example 2: configuration forcing use of the Java Plugin in all cases (even if
    # the client browser is on Windows)
    [jpi]
    baseHTMLJInitiator=basejpi.htm
    # Example Named Configuration Section
    # Example 3: configuration running the Forms ListenerServlet in debug mode
    # (debug messages will be written to the servlet engine's log file).
    [debug]
    serverURL=/forms/lservlet/debug
    # Sample configuration for deploying WebUtil. Note that WebUtil is shipped with
    # DS but not AS and is also available for download from OTN.
    [webutil]
    #WEBUTIL_CONFIG=C:\DevSuiteHome_1\forms\webutil.cfg
    #WebUtilArchive=frmwebutil.jar,jacob.jar
    WebUtilArchive=/forms/java/frmwebutil.jar,/forms/java/jacob.jar
    WebUtilLogging=off
    WebUtilLoggingDetail=normal
    WebUtilErrorMode=Alert
    WebUtilDispatchMonitorInterval=5
    WebUtilTrustInternal=true
    WebUtilMaxTransferSize=16384
    archive_jini=frmall_jinit.jar
    archive=frmall.jar
    lookAndFeel=oracle
    [webutilie]
    IE=native
    webUtilArchive=/forms/java/frmwebutil.jar,/forms/java/jacob.jar
    WebUtilLogging=off
    WebUtilLoggingDetail=normal
    WebUtilErrorMode=Alert
    WebUtilDispatchMonitorInterval=5
    WebUtilTrustInternal=true
    WebUtilMaxTransferSize=16384
    baseHTML=webutilbase.htm
    baseHTMLie=webutilbase.htm
    archive=/forms/java/frmall.jar
    lookAndFeel=oracle
    [webutiljpi]
    WebUtilArchive=/forms/java/frmwebutil.jar,/forms/java/jacob.jar
    WebUtilLogging=off
    WebUtilLoggingDetail=normal
    WebUtilErrorMode=Alert
    WebUtilDispatchMonitorInterval=5
    WebUtilTrustInternal=true
    WebUtilMaxTransferSize=16384
    baseHTMLjinitiator=webutiljpi.htm
    baseHTMLjpi=webutiljpi.htm
    baseHTMLie=webutiljpi.htm
    baseHTML=webutiljpi.htm
    archive=/forms/java/frmall.jar
    [tutoforms10g]
    envFile=tutforms10g.env
    archive_jini=frmall_jinit.jar,myIcons.jar,FormsGraph.jar
    archive=frmall.jar,myIcons.jar,FormsGraph.jar
    pageTitle=Oracle Forms 10g tutorial
    WebUtilArchive=frmwebutil.jar,jacob.jar
    WebUtilLogging=off
    WebUtilLoggingDetail=normal
    WebUtilErrorMode=Alert
    WebUtilDispatchMonitorInterval=5
    WebUtilTrustInternal=true
    WebUtilMaxTransferSize=16384
    baseHTMLjinitiator=webutiljini.htm
    baseHTMLjpi=webutiljpi.htm
    form=tuto_forms.fmx
    separateFrame=True
    lookandfeel=Oracle
    imagebase=codebase
    width=2000
    height=800
    splashScreen=no
    background=no
    lookAndFeel=Oracle
    colorScheme=blaf
    logo=no
    2 class path,create db packages,generate plx? how to set where? classpath,create public synonym? Please ask me step to set

  • Is there any option to recover a file we saved with the same name that other by mistake in a MAC PC

    is there any option to recover a file we saved with the same name that other by mistake in a MAC PC

    There's a slim chance. +*Stop using the drive IMMEDIATELY.+*
    Then see: [Data Recovery|http://web.me.com/pondini/AppleTips/Recover.html].

  • How do I get the directory name that a class is located in?

    How do I get the directory name that a class is located in? I have a class located under /com/dhcmc and I want to be able to retrieve the "/com/dhcmc" that the class is residing under so that I can then use this directoy name to build a relative path name for the other directories supporting the application such as the images directory etc i.e.
    |---com
    |   \---dhcmc       (my class resides here)
    |       +---images  (supporting app dirs under the class dir)
    |       +---config  (supporting app dirs under the class dir)

    You can try the methods.
    Class.getClassLoader()
    Class.getResourceAsStream()
    Class.getResource()
    You probably wont get the complete directory path, but you might
    be able to load the files relative to your classes directory.

Maybe you are looking for