Error Trapping for reports
I inserted a formula column and written an SQL statement which sometimes returns a value. But sometimes there is no data matches the criteria so no row is selected.
In this case reports gives fatal error warning and stops. To get around this i wrote
exception
when no_data_found then null;
i also tried
if sql%notfound then null;
None of this worked. Please help
ps. it is a function which has to return a value.
Hi
May be the reason is that you doesn't return the value after exception. Try:
WHEN no_data_found THEN RETURN ret_val;
Andrew.
Similar Messages
-
I have a access 2013 database. I am trying to automate generation of 3K+ pdf reports. I have the following code. It was working in a previous iteration of the code pictured here, but due to some "illegal" characters, was canceling
the outputTo command lines due to those characters. i.e. mostly / chars. So, I wanted to trap those errors and write them to a table, I added the on error statement. It works for the first record with an illegal character, but second time
around it cancels the outputTo command. What am I doing wrong?
Private Sub OutputAll_Click()
DoCmd.GoToRecord , , acFirst
Dim V_Counter
V_Counter = 1
Me.Counter = V_Counter
Do While V_Counter <= 20
On Error GoTo FirstReportError
DoCmd.OutputTo acOutputReport, "NoMeasurementsIPReportForQualityPreview", acFormatPDF, "c:\PDFFiles\" & Me.IPKey
GoTo NoFirstFeportError
FirstReportError:
DoCmd.OpenForm "IPKeyErrorsForm"
Forms!IpKeyErrorsForm.IpKeyError = Me.IPKey
DoCmd.Close acForm, "IPKeyErrorsForm"
DoEvents
GoTo SkipSecondReportDueToError
NoFirstFeportError:
DoCmd.OutputTo acOutputReport, "NoMeasurementsIPReportForQualityPreviewProductionVersion", acFormatPDF, "c:\PDFFiles\" & Me.IPKey & "_ProductionVersion"
DoEvents
SkipSecondReportDueToError:
DoCmd.GoToRecord , , acNext
V_Counter = V_Counter + 1
Me.Counter = V_Counter
Loop
End Sub
IPKey on this report is:
00-5901-981-02_STYLUS BAR 4/6 MM_100_DHans,
Thanks again for your timely response. It is now sort of working, but I must be missing one important piece. Here is what I have.
Private Sub OutputAll_Click()
DoCmd.GoToRecord , , acFirst 'Go to the first record
Dim V_Counter
V_Counter = 1
Me.Counter = V_Counter
Do While V_Counter <= 739
If V_Counter = 739 Then
MsgBox "Counter is 739"
End If
On Error GoTo FirstReportError
DoCmd.OutputTo acOutputReport, "NoMeasurementsIPReportForQualityPreview", acFormatPDF, "C:\PDFFiles\" & Me.IPKey & ".pdf"
Resume NoFirstReportError
FirstReportError:
DoCmd.OpenForm "IPKeyErrorsForm"
Forms!IpKeyErrorsForm.IpKeyError = Me.IPKey
DoCmd.Close acForm, "IPKeyErrorsForm"
DoEvents
Resume SkipSecondReportDueToError
NoFirstReportError:
DoCmd.OutputTo acOutputReport, "NoMeasurementsIPReportForQualityPreviewProductionVersion", acFormatPDF, "c:\PDFFiles\" & Me.IPKey & "_ProductionVersion" & ".pdf"
DoEvents
SkipSecondReportDueToError:
DoCmd.GoToRecord , , acNext
V_Counter = V_Counter + 1
Me.Counter = V_Counter
Loop
Done:
End Sub
Only problem is, it does the code after the label "FirstReportError" every time. What am I missing? -
Error trapping for 'Save' dialog open?
I'm writing a program which will do an extensive amount of work in Photoshop, and I'm trying to make sure it's as idiot-proof as possible. Before starting the image editing code, I want to make sure the user hasn't left any dialogs open in Photoshop, so I can show them a warning and cancel the application. I have found that attempting to get any properties of the application (e.g. version, document count, build, etc.) will throw an error if the user has the 'Open' dialog showing, but if they have the 'Save' dialog open, there is no error. Is there any reliable way to determine if the user has left Photoshop in a state where it will cause problems executing code?
My script is currently written in Applescript, but will hopefully be someday rewritten in Javascript, so I'd be interested in any suggestions in either language with preference leaning towards Javascript.Well, they just keep on amazing me. And it doesn't seem like they went to any great lengths to do so either.
During this 'exercise' I just kept thinking I'd eventually find something that would throw an error while the dialog was up...
"Well, I shouldn't be able to do _____."
"...well, I certainly won't be able to do _____..."
"...ok, there's absolutely no way I would be able to ____."
...I thought being able to alter the document was bad enough - but you can even CLOSE the document you are trying to save from an external script!! ...and you are guaranteed a crash when you click the 'save' button at that point.
The only thing I have come across so far which doesn't seem to work with the save as dialog open is opening another document. And even that doesn't throw an error - it just hangs the script (no change with 'try/on error...", no change with 'with timeout...")
...oh, well. It's almost 5:00 on a Friday. I think I'll just go home feeling defeated. -
Error while Connecting report Best Practices v1.31 with SAP
Hello experts,
I'm facing an issue while trying to connect some of my reports from Best Practices for BI with SAP.
It only happens when it's about info sets, the other ones that are with SAP tables go smoothly without a problem.
The most interesting is I have already one of the reports connected to SAP info sets.
I have already verified the document of steps of creation of additional database that comes with BP pack. They seem ok.
Here goes what Crystal Reports throws to me after changing the data source to SAP:
For report "GL Statement" one of the Financial Analysis one which uses InfoSet: /KYK/IS_FIGL_I3:
- Failed to retrieve data from the database; - click ok then...
- Database connector error: It wasn't indicated any variant for exercise (something like this after translating) - click ok then
- Database connector error: RFC_INVALID_HANDLE
For report "Cost Analysis: Planned vs. Actual Order Costs" one of the Financial Analysis one which uses InfoSet: ZBPBI131_INFO_ODVR and ZBPBI131_INFO_COAS; and also the Query CO_OM_OP_20_Q1:
- Failed to retrieve data from the database; - click ok then...
- Database connector error: check class for selections raised errors - click ok then
- Database connector error: RFC_INVALID_HANDLE
Obs.: Those "Z" infosets are already created in SAP environment.
The one that works fine is one of the Purchasing Analysis reports:
- Purchasing Group Analysis -> InfoSet: /KYK/IS_MCE1
I'm kind of lost to solve this, because I'm not sure if it can be in the SAP JCO or some parameter that was done wrongly in SAP and I have already check possible solutions for both.
Thanks in advance,
Carlos Henrique Matos da Silva - SAP BusinessObjects BI - Brazil.I re-checked step 3.2.3 - Uploading Crystal User Roles (transaction PFCG) - of the manual where it talks about CRYSTAL_ENTITLEMENT and CRYSTAL_DESIGNER roles, I noticed in the Authorizations tab that the status was saying it hadn't been generated and I had a yellow sign, so then that was what I did (I generated) as it says in the manual.
Both statuses are now saying "Authorization profile is generated" and the sign is now green on the tab.
I had another issue in the User tab (it was yellow as Authorizations one before generating)....all I needed to do to change to green was comparing user (User Comparison button).
After all that, I tried once more to refresh the Crystal report and I still have the error messages being thrown.
There's one more issue in one of the tabs of PFCG transaction, it is on the Menu one where it is with a red sign, but there's nothing talking about it in the manual. I just have a folder called "Role menu" without anything in it.
Can it be the reason why I'm facing errors when connecting the report to SAP infoSets? (remember one of my reports which is connected to an infoSet works good)
Thanks in advance,
Carlos Henrique Matos da Silva - SAP BusinessObjects BI - Brazil. -
How to create a inline message for report region...
Hi,
Can any one pls tell me the document link for to create a inline error message for report region?
im trying to do a dynamic validation for report region.i've manually created a report region with apex item.
im searching it for long time, im cant able to find any demos or example.
Pls help.....
Thanks in advance...Any help???
-
Error on Bursting Report for BI Publisher
hi all,
i am getting the following error when i am bursting the report for BI Publisher.
* Nested Exception (Underlying Cause) ---------------
oracle.apps.xdo.servlet.scheduler.ProcessingException: java.lang.NullPointerExce
ption
at oracle.apps.xdo.servlet.scheduler.XDOJob.runBurstingReport(XDOJob.jav
a:2116)
at oracle.apps.xdo.servlet.scheduler.XDOJob.execute(XDOJob.java:358)
at org.quartz.core.JobRunShell.run(JobRunShell.java:195)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.j
ava:520)
Caused by: java.lang.NullPointerException
at com.sun.java.util.collections.Hashtable.get(Hashtable.java:321)
at oracle.apps.xdo.batch.bursting.ProcessEnterpriseDocument.processLayou
t(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.addDocument2Queue(Unkno
wn Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.createBurstingDocument(
Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.endDocument(Unknown Sou
rce)
at oracle.xml.parser.v2.XMLContentHandler.endDocument(XMLContentHandler.
java:119)
at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingP
arser.java:311)
at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:263)
at oracle.apps.xdo.batch.BurstingProcessorEngine.burstingRequest(Unknown
Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.process(Unknown Source)
at oracle.apps.xdo.servlet.scheduler.XDOJob.runBurstingReport(XDOJob.jav
a:2008)
... 3 more
Kindly Help..
Thanks.Thanks alot Guru for u r reply, i am attaching more Details regarding my error.
In Reporting options i gave
Reporting folder CCB
Reporting server:BIPUbliser url
Reporting password:Admin
Reproting userid:Admin
I already configured Bill Display Algorithm OBLD_CRYS in installation-frame work
Now i am getting the error the value in the field is not a valid value for the field.
In Console I am getting the error '
SYSUSER - 612791-31-1 2011-05-26 11:32:21,709 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] ERROR (schema.rules.BusinessObjectRuleProcessor$Factory) There is more th
an 1 MO for the service 'CILCSVAP': MaintenanceObject_Id(SA), MaintenanceObject_Id(CM_CONT), using 1st one 'MaintenanceObject_Id(SA)'
<May 26, 2011 11:32:22 AM IST> <Error> <HTTP> <BEA-101020> <[ServletContext@4736418[app:SPLWeb module:/spl path:/spl spec-version:2.5]] Servlet failed with Exception
com.splwg.shared.common.ApplicationError: (Server Message)
Category: 3
Number: 501
Call Sequence: ;CIPCSVAP
Program Name: CIPCSVAP
Text: You are not allowed access (directly/indirectly) to this account.
Description: Please contact your security administrator to check your security for this account.
Table:
Field:
at com.splwg.base.support.context.FrameworkSession.addError(FrameworkSession.java:1177)
at com.splwg.base.support.context.FrameworkSession.addError(FrameworkSession.java:1158)
at com.splwg.base.support.cobol.CobolSubprogram.populateError(CobolSubprogram.java:142)
at com.splwg.base.support.cobol.CobolSubprogram.checkForErrors(CobolSubprogram.java:94)
at com.splwg.base.support.cobol.AbstractCobolProgram$CallCobolClosure.run(AbstractCobolProgram.java:214)
Truncated. see log file for complete stacktrace -
Error while creating logical port for Reporting
Hi,
In one of the training materials for Duet Enterprise, i saw the steps for creating logical port for the consumer proxy /IWTNG/CO_PXY_RECORDS_REPOSITO.
When i am trying to create the logical port, i am getting an error saying,
" SRT Framework exception: Error in WSDL access: Exception occurred in communication framework:Error in HTTP Framework:500 Native SSL error
https://<server:port>/_vti_bin/OBAFileReceiver.asmx?wsdl "
I would like to know is it really necessary to create this logical port for "Reporting Scenario" and is it not created automaticallly using the Installation Wizard??
And in case it has to be created, how to resolve this SRT framework exception?
~ Ramanath.Hi,
the consumer proxy /IWTNG/CO_PXY_RECORDS_REPOSITO was used in Duet Enterprise SP01. Now with SP02 the consume proxy /IWTNG/CO_OBAFILE_RECEIVER_SOA is created.
However, the SSL error that you are getting looks a little strange (it does not mean that there is an error, but it is worth checking):
So can you go to SOAMANAGER -> Service Administration -> Single Service Configuration. In here select "Consumer Proxy" from the "Search by", Search Pattern "/IWTNG/CO_OBAFILE_RECEIVER_SOA" and Field: Both.
You should find one entry. Select it and click "Apply Selection".
Now go to the Configurations tab. Here you should see one Logical Port with name "LOGICALPORTFORREPORTING" with Creation Type "Manually Created". In fact this logical port was created by the Wizard.
Click on Display and scroll down again. Now in the "Additional Information" tab there is a string after HTTP Destination, e.g. 0050568E3F5A1ED096F22339C44BAF83.
Copy this value and go to your SAP GUI -> Transaction SM59.
Here click on Find/Search and search for this HTTP Destination. You should find one Type G RFC Destination that has the target host of your SharePoint server and the path prefix /_vti_bin/OBAFileReceiver.asmx.
Now you can test the service. Just click on Connection Test. The result should be a HTTP Response: 200.
If not, then something went wrong with the automatic configuration and we should take another look at it (for example maybe the SSL certificate from SharePoint that was imported by the Wizard is not valid)
Regards,
Holger.
PS. Don't use the "Ping Web Service" test from SOAMANGER -- unfortunately this is not working consistently. -
Error while saving layout for report
Using BIEE 11. (Win64 Server 2003 R2 - russian edition)
When designing layout for report and putting text field (dos'nt matter - russ or engl) - I get an error during saving - 'Error when saving layout' (trunslated from russ)
This happens only when putting text field, with other types of filds all is ok!
Where can I find more detailed info about my error?
Also when I choose layout from existing e.g. - Dashboard.xpt and save - I get the same error. When I cut off all text fields from this template - I can successfully save it.
ThanksCheck the OSS note 550760 regarding the issue.
-
FPN: No ESID found error while invoking BEx iviews for Reports.
Hi Everybody,
We have a federated portal network [FPN] setup. We are EP 7 SP15 for both Consumer portal and BI producer portal.
The content is delivered to users via RRA Remote Role Assignment ] in consumer portal for BI portal roles from Producer bi portal.
The problem is when we are trying to access BEx iviews for Reports i get the error: Internal error No esid found.
The BEx iview for Queries are running fine but the problem is for BEx iviews for Reports in consumer portal.
All reports are running fine in producer BI portal.
Consumer portal AD UME and producer portal is ABAP UME.
Please help to fix this.
Below is the trace.
#1.5 #00237DA36C70002900000015000058A7000477861BB01CF2#1257317780692#com.sap.security.core.umap.imp.UserMapping#sap.com/irj#com.sap.security.core.umap.imp.UserMapping.getInverse
MappingData(String, ISystemLandscapeObject)#J2EE_GUEST#0#####SAPEngine_Application_Thread[impl:3]_29##0#0#Info##Java###Found local user "" being mapped to backend user ""
for system .#3#USER.R3_DATASOURCE.RAMA#RAMA#"(null)"#
#1.5 #00237DA36C70002900000016000058A7000477861BBFA58B#1257317781710#com.sap.ip.bi.base.exception.BIBaseRuntimeException#sap.com/irj#com.sap.ip.bi.base.exception.BIBaseRuntimeEx
ception#RAMALINX#2777#####SAPEngine_Application_Thread[impl:3]_29##0#0#Error#1#/Applications/BI#Plain###Exception thrown: com.sap.ip.bi.base.exception.BIBaseRuntimeException:
Error: Internal error. No esid found.
com.sap.ip.bi.base.exception.BIBaseRuntimeException: Error: Internal error. No esid found.
at
com.sap.ip.bi.webapplications.runtime.jsp.portal.services.BIRuntimeService._createController(BIRuntimeService.java:687)
at
com.sap.ip.bi.webapplications.runtime.jsp.portal.services.BIRuntimeService.createController(BIRuntimeService.java:642)
at
com.sap.ip.bi.webapplications.runtime.jsp.portal.services.BIRuntimeService._handleRequest(BIRuntimeService.java:343)
at
com.sap.ip.bi.webapplications.runtime.jsp.portal.services.BIRuntimeService.handleRequest(BIRuntimeService.java:276)
at
com.sap.ip.bi.webapplications.runtime.jsp.portal.components.LauncherComponent.doContent(LauncherComponent.java:24)
at
com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at
com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at
com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest
(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at
com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at
com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest
(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at
com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run
(Dispatcher.java:524)
at java.security.AccessController.doPrivileged(AccessController.java:246)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service
(Dispatcher.java:407)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service
(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet
(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle
(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request
(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at
com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
atDarryl
Thank you for the quick reply.. I did check and the system property field was blank
I also wanted to point out that we are not experiencing this issue in our Dev enviornment, and all content was transported to Q. Only in Q are we getting this issue.
Please advise -
I have created an RDL file programatically. When I execute the code I get the error as mentioned below:
Error: Sub report cannot be shown.
An internal error occurred on the report server. See the error log for more details. (rsInternalError)
When I copy and paste the code of RDL file into new RDL file and try to preview the output I get correct result.
Note: The new RDL file does not give any error if the output is seen using preview tab but it gives the error only when executed from report viewer or from internet explorer.
Any Suggestion/feedback is highly appreciated.
Thank You.
The code of the sample RDL is shown below:
<?xml version="1.0" encoding="utf-8"?>
<Report xmlns="http://schemas.microsoft.com/sqlserver/reporting/2005/01/reportdefinition" xmlns:rd="http://schemas.microsoft.com/SQLServer/reporting/reportdesigner">
<DataSources>
<DataSource Name="DataSource1">
<DataSourceReference>DataSource1</DataSourceReference>
<rd:DataSourceID>fe4806ee-0358-4a87-b764-ac5de049545e</rd:DataSourceID>
</DataSource>
</DataSources>
<BottomMargin>0.25in</BottomMargin>
<RightMargin>0.25in</RightMargin>
<PageWidth>11in</PageWidth>
<ReportParameters>
<ReportParameter Name="machine_id">
<DataType>String</DataType>
<Prompt>machine_id</Prompt>
</ReportParameter>
<ReportParameter Name="from_date">
<DataType>String</DataType>
<AllowBlank>true</AllowBlank>
<Prompt>From Date</Prompt>
</ReportParameter>
<ReportParameter Name="to_date">
<DataType>String</DataType>
<AllowBlank>true</AllowBlank>
<Prompt>To Date</Prompt>
</ReportParameter>
</ReportParameters>
<rd:DrawGrid>true</rd:DrawGrid>
<InteractiveWidth>8.5in</InteractiveWidth>
<rd:SnapToGrid>true</rd:SnapToGrid>
<Body>
<ReportItems>
<Table Name="table1">
<DataSetName>Main_Report</DataSetName>
<TableGroups>
<TableGroup>
<Header>
<TableRows>
<TableRow>
<TableCells>
<TableCell>
<ReportItems>
<Textbox Name="textbox2">
<rd:DefaultName>textbox2</rd:DefaultName>
<ZIndex>1</ZIndex>
<Style>
<TextAlign>Left</TextAlign>
<PaddingLeft>2pt</PaddingLeft>
<PaddingBottom>2pt</PaddingBottom>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
</Style>
<CanGrow>true</CanGrow>
<Value>=Fields!syscode.Value</Value>
</Textbox>
</ReportItems>
</TableCell>
</TableCells>
<Height>0.25in</Height>
</TableRow>
</TableRows>
<RepeatOnNewPage>true</RepeatOnNewPage>
</Header>
<Grouping Name="table1_Group1">
<PageBreakAtEnd>true</PageBreakAtEnd>
<GroupExpressions>
<GroupExpression>=Fields!syscode.Value</GroupExpression>
</GroupExpressions>
</Grouping>
</TableGroup>
</TableGroups>
<Details>
<TableRows>
<TableRow>
<TableCells>
<TableCell>
<ReportItems>
<Subreport Name="subreport1">
<Parameters>
<Parameter Name="machine_id">
<Value>=Fields!machine_ip.Value</Value>
</Parameter>
<Parameter Name="syscode">
<Value>=Fields!syscode.Value</Value>
</Parameter>
<Parameter Name="from_date">
<Value>=Parameters!from_date.Value</Value>
</Parameter>
<Parameter Name="to_date">
<Value>=Parameters!to_date.Value</Value>
</Parameter>
</Parameters>
<ReportName>Holding_Summary_Multi_Period</ReportName>
</Subreport>
</ReportItems>
</TableCell>
</TableCells>
<Height>0.25in</Height>
</TableRow>
</TableRows>
</Details>
<TableColumns>
<TableColumn>
<Width>10.5in</Width>
</TableColumn>
</TableColumns>
<Height>0.5in</Height>
</Table>
</ReportItems>
<Height>0.75in</Height>
</Body>
<rd:ReportID>d0a1293a-e98c-4f75-9597-03426d2e7218</rd:ReportID>
<LeftMargin>0.25in</LeftMargin>
<DataSets>
<DataSet Name="Main_Report">
<Query>
<rd:UseGenericDesigner>true</rd:UseGenericDesigner>
<CommandText>select account_syscode as syscode , 'display Name' as display_name , * from mars_customer_list
where machine_ip = @machine_id</CommandText>
<QueryParameters>
<QueryParameter Name="@machine_id">
<Value>=Parameters!machine_id.Value</Value>
</QueryParameter>
</QueryParameters>
<DataSourceName>DataSource1</DataSourceName>
</Query>
<Fields>
<Field Name="syscode">
<rd:TypeName>System.Int64</rd:TypeName>
<DataField>syscode</DataField>
</Field>
<Field Name="display_name">
<rd:TypeName>System.String</rd:TypeName>
<DataField>display_name</DataField>
</Field>
<Field Name="customer_syscode">
<rd:TypeName>System.Int64</rd:TypeName>
<DataField>customer_syscode</DataField>
</Field>
<Field Name="account_syscode">
<rd:TypeName>System.Int64</rd:TypeName>
<DataField>account_syscode</DataField>
</Field>
<Field Name="machine_ip">
<rd:TypeName>System.String</rd:TypeName>
<DataField>machine_ip</DataField>
</Field>
</Fields>
</DataSet>
</DataSets>
<Code>Shared offset As Integer
Public Function GetPN(reset As Boolean, pagenumber As Integer) As Integer
If reset
offset = pagenumber - 1
End If
Return pagenumber - offset
End Function
</Code>
<Width>10.5in</Width>
<InteractiveHeight>11in</InteractiveHeight>
<Language>en-US</Language>
<PageFooter>
<ReportItems>
<Image Name="image1">
<Sizing>Fit</Sizing>
<Left>8.875in</Left>
<MIMEType />
<Width>1.5in</Width>
<Source>External</Source>
<Style />
<Value>bottom_right_logo.gif</Value>
</Image>
</ReportItems>
<Height>0.5in</Height>
<PrintOnLastPage>true</PrintOnLastPage>
<PrintOnFirstPage>true</PrintOnFirstPage>
</PageFooter>
<TopMargin>0.5in</TopMargin>
<PageHeight>8.5in</PageHeight>
</Report>i created a SSRS report with shared datasets and uploaded rdl files and rsd files , while trying to map rdl file with data sets i am getting an error
when i click on manage for .rdl file, its throwing error , as
"An internal error occurred on the report server. See the error log for more details. (rsInternalError)
Object reference not set to an instance of an object.
please help me with this -
Option for error handling for DTP, ' no updata, no reporting" and "deactiva
Hello Gurus,
option for error handling for DTP, ' no updata, no reporting" and "deactivated" , please give some explanation and instance for them?
Many Thanks,On the Update tab page, specify how you want the system to respond to data records with errors:
a. No update, no reporting (default)
If errors occur, the system terminates the update of the entire data package. The request is not released for reporting. However, the system continues to check the records.
b. Update valid records, no reporting (request red)
This option allows you to update valid data. This data is only released for reporting after the administrator checks the incorrect records that have not been updated and manually releases the request by setting the overall status on the Status tab page in the monitor (QM action).
c. Update valid records, reporting possible
Valid records can be reported immediately. Automatic follow-up actions, such as adjusting the aggregates, are also carried out.
http://help.sap.com/saphelp_smehp1/helpdata/en/42/fbd598481e1a61e10000000a422035/content.htm
Hope it helps.
rgds, Ghuru -
DUMP ERROR FOR REPORT TO ASSIGN TCODE TO ABAP QUERY
hi friends ..
i did this smallreport by difernet type but its the
error says dump_--report not found or status errror says
maximum session reached ..i think there something wrong in my submit stmt .pls let me know ...
also assign tcode to the report.
DATA:QUERYREPORT LIKE AQADEF-PGNAME,
QUERY LIKE AQADEF-QUNAME,
USERGROUP LIKE AQADEF-BGNAME,
WORKSPACE LIKE AQADEF-WSID.
query = 'zskview'.
usergroup = 'zskgrp'.
workspace = ''.
get name of queryreport
CALL FUNCTION 'RSAQ_REPORT_NAME'
EXPORTING
WORKSPACE = workspace
USERGROUP = usergroup
QUERY = query
IMPORTING
REPORTNAME = QUERYREPORT
EXCEPTIONS
OTHERS = 0.
SUBMIT (QUERYREPORT)
VIA SELECTION-SCREEN
USING SELECTION-SETS OF PROGRAM QUERYREPORT
AND RETURN.HI farukh,
1. The program u have written
is for running DYNAMIC query,
(given the query name)
2. In debugging,
chck the value of the variable
queryreport
after the FM is executed.
3. It will contain the program name (of the corersponding query)
in the following format (eg)
AQFKzskgrp======ZAMQ01========
4. Open another se38,
and CHECK whether this program exists or not!
5. If it does not,
a)either the QUERY NAME is not correct,
b) either the user group is not correct,
c) either the query is deleted / not generated .
regards,
amit m. -
How to keep the field open for input with error message in report program
Hi,
Need a help in solving the below issue.
"How to keep the field open for input with error message in report program"
Regards,
C.Shasiraj.Hi...
you have to use the event:
<b>AT SELECTION-SCREEN ON <FIELD> EVENT.</b>
u have to give an error message in this event.
Consider the following <b>Example:</b>
<b>PARAMETERS : NUMBER TYPE I.
AT SELECTION-SCREEN ON NUMBER.
IF NUMBER = 10.
MESSAGE 'Number vakue is 10' TYPE 'E'.
ENDIF.
START-OF-SELECTION.
WRITE NUMBER.
</b>
in this if u give the value of number = 10, it will not proceed further, if u give some other value other than 10 you will proceed further...
Execute this program once u will understand....
also Consider the following links :
<b>Regarding events:</b>
http://help.sap.com/saphelp_erp2005vp/helpdata/en/79/34a237d9b511d1950e0000e8353423/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/79/34a23ad9b511d1950e0000e8353423/frameset.htm
<b>Regarding messages:</b>
http://help.sap.com/saphelp_erp2005vp/helpdata/en/c5/aa575426ad11d2954d0000e8353423/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/c5/aa575426ad11d2954d0000e8353423/frameset.htm
This is very useful.......
Reward points if useful....
Suresh.... -
An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get Online Help The profile for the user is a temporary profile. (Exception from HRESULT: 0x80090024)
while proview the report i will get this error am using sql server 2008R2,
can u plesae hlep me out for this
<Header>
<Product>Microsoft SQL Server Reporting Services Version 2009.0100.1600.01 ((KJ_RTM).100402-1539 )</Product>
<Locale>English (United States)</Locale>
<TimeZone>W. Europe Standard Time</TimeZone>
<Path>C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\Logfiles\ReportServerService__01_30_2015_03_09_32.log</Path>
<SystemName>WEGDACM1</SystemName>
<OSName>Microsoft Windows NT 6.1.7601 Service Pack 1</OSName>
<OSVersion>6.1.7601</OSVersion>
<ProcessID>4880</ProcessID>
<Virtualization>Hypervisor</Virtualization>
</Header>
rshost!rshost!5e4!01/30/2015-03:09:32:: i INFO: Currently registered url http://+:80/ReportServer_MSSQLSERVEREPORT/ on endpoint 2
rshost!rshost!5e4!01/30/2015-03:09:32:: e ERROR: Failed to register url=http://+:80/Reports/ for endpoint 3, error=b7.
rshost!rshost!5e4!01/30/2015-03:09:32:: w WARN: Endpoint 3 is enabled but no url is registered for vdir=/Reports, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\ReportManager.
servicecontroller!DefaultDomain!1e30!01/30/2015-03:09:32:: e ERROR: Error creating HTTP endpoint. System.Runtime.InteropServices.COMException (0x800700B7): Cannot create a file when that file already exists. (Exception from HRESULT: 0x800700B7)
at Microsoft.ReportingServices.HostingInterfaces.IRsUnmanagedCallback.CreateHttpEndpoint(RsAppDomainType application, String[] urlPrefixes, Int32 cPrefixes, String[] hosts, Int32 cHosts, Boolean wildCardPresent, String virtualDirectory, String
filePath, Int32 authType, Int32 logonMethod, String authDomain, String authRealm, Boolean authPersist, Int32 extendedProtectionLevel, Int32 extendedProtectionScenario, Boolean enabled)
at Microsoft.ReportingServices.Library.ServiceAppDomainController.SetWebConfiguration(RunningApplication rsApplication, Boolean enabled, String folder)
rshost!rshost!65c!01/30/2015-03:09:32:: i INFO: Endpoint 4 is disabled and no url is registered vdir=/ReportServer_MSSQLSERVEREPORT/ReportBuilder, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\ReportServer\ReportBuilder.
rshost!rshost!1e30!01/30/2015-03:09:32:: i INFO: Derived memory configuration based on physical memory as 16776696 KB
servicecontroller!DefaultDomain!1e30!01/30/2015-03:09:32:: i INFO: Recycling the service from the default domain
rshost!rshost!1e30!01/30/2015-03:09:46:: i INFO: Application domain type WindowsService statistics: created: 7, unloaded: 7, failed: 0, timed out: 0.
appdomainmanager!DefaultDomain!1e30!01/30/2015-03:09:46:: i INFO: Appdomain:11 WindowsService_7 started.
library!WindowsService_7!1e30!01/30/2015-03:09:46:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
servicecontroller!WindowsService_7!1e30!01/30/2015-03:09:46:: e ERROR: Error initializing configuration from the database: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration
error.
resourceutilities!WindowsService_7!1e30!01/30/2015-03:09:47:: i INFO: Reporting Services starting SKU: Enterprise
servicecontroller!WindowsService_6!1e30!01/30/2015-03:09:47:: i INFO: Service controller exiting.
appdomainmanager!DefaultDomain!1e30!01/30/2015-03:09:47:: i INFO: Appdomain:10 unregistered.
appdomainmanager!DefaultDomain!1e30!01/30/2015-03:09:47:: i INFO: Appdomain:10 WindowsService_6 unloading.
appdomainmanager!DefaultDomain!1f40!01/30/2015-03:09:47:: i INFO: AppDomain:10 0 pending unload(s)
library!WindowsService_7!2410!01/30/2015-03:09:47:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
library!WindowsService_7!2410!01/30/2015-03:09:47:: e ERROR: ServiceStartThread: Exception caught while starting service. Error: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration
error.
library!WindowsService_7!2410!01/30/2015-03:09:47:: e ERROR: ServiceStartThread: Attempting to start service again...
library!DefaultDomain!202c!01/30/2015-08:04:43:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
library!DefaultDomain!202c!01/30/2015-08:25:26:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
library!DefaultDomain!202c!01/30/2015-08:26:16:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
The above is my log file pls find it resolve my problem,am trying to add the encryption key to my configuration seetings it will through the error like The profile you were used is temporary profile. -
Error reading cluster table COIX for report 13BUD1A
Hi All,
We have issue when display report 13BUD1A using t.code CJE0 in ECC6 system. The error message appear as per below:-
Error reading cluster table COIX for report 13BUD1A (ID=13BUD1A KP 01RPSCO_X 0)
Message no. KH050
Diagnosis
The report structure for report 13BUD1A is stored in the cluster table COIX. An error occurred while the system was reading this data (ID = 13BUD1A KP 01RPSCO_X 0).
Table TKEB1 (Report List) contains administration information for report 13BUD1A. Consequently, table TKEB1 has an entry for the report, but table COIX does not.
The error may have resulted following a transport -- COIX has not yet been transported to the current client but TKEB1 is already there.
Procedure
If it is a transport problem, see if you can execute report 13BUD1A in client 000. If so, import it to the current client again.
If it is not a transport problem, delete report 13BUD1A from Tables TKEB1 and TKEB2.
Need you advice, how can we solve this error.
Thank You.Dear AP,
Thanks for your reply. FYI, we dont have access to client 000. And how to resolve this issue without access client 000?
Maybe you are looking for
-
Find in Address book doesn't work - always says 5 matches, never shows any
The contacts in my 10.6.2 install were migrated over from a 10.4.11 install on a PPC Mini. If I open Address Book and enter anything (real or nonsense) into the search bar, the number at the bottom of the window changes from "X cards" to "5 of X card
-
I have a bricked ipod and dont know what to do
can u guy help me please 4th gen
-
CinemaDNG presented at Siggraph 2010
CinemaDNG Initiative for Interoperability in DigitalCinema Capture "Presenting CinemaDNG: an industry-wide initiative foran open, raw image format for digital cinematography. Capturing and editingcamera raw video in a vendor-neutral, standard format.
-
Select from all_tables inside a procedure brings a different result set
Hi all, There are two cases.. both are the same, but gives different out put. CASE 1 pulls few for SYS and all for current user. CASE 2 Pulls data for ALL USERS. Why the same code in side a procedure brings a different result ? SQL> --CASE 1 CREATE O
-
I am making a collage of pictures and realized I had added a number of pictures directly onto the background without creating separate layers. When I wanted to move some of them, I couldn't because the background is locked.Is there a way to unlock th