Error reading cluster table COIX for report 13BUD1A
Hi All,
We have issue when display report 13BUD1A using t.code CJE0 in ECC6 system. The error message appear as per below:-
Error reading cluster table COIX for report 13BUD1A (ID=13BUD1A KP 01RPSCO_X 0)
Message no. KH050
Diagnosis
The report structure for report 13BUD1A is stored in the cluster table COIX. An error occurred while the system was reading this data (ID = 13BUD1A KP 01RPSCO_X 0).
Table TKEB1 (Report List) contains administration information for report 13BUD1A. Consequently, table TKEB1 has an entry for the report, but table COIX does not.
The error may have resulted following a transport -- COIX has not yet been transported to the current client but TKEB1 is already there.
Procedure
If it is a transport problem, see if you can execute report 13BUD1A in client 000. If so, import it to the current client again.
If it is not a transport problem, delete report 13BUD1A from Tables TKEB1 and TKEB2.
Need you advice, how can we solve this error.
Thank You.
Dear AP,
Thanks for your reply. FYI, we dont have access to client 000. And how to resolve this issue without access client 000?
Similar Messages
-
Special authorization need for read cluster table??
In one report, I use following coding to read information from RFDT table:
form get_f110_parm .
f110id-laufd = p_laufd.
f110id-laufi = p_laufi.
f110versionpar = space.
clear: buktab, fkttab, slktab, sldtab, trctab, usrtab,
faetab, jobtab, f110v, f110c, trcopt, f110versionpar.
import buktab fkttab slktab sldtab trctab usrtab
faetab jobtab f110c trcopt f110versionpar
from database rfdt(fb) id f110id
accepting padding.
endform. " GET_F110_PARM
I can fill F110c, trcopt and f110versionpar by this program. But there is no entry in table like fkttab, usrtab.
Is there any authorization need for read cluster table??
Thanks in advance.
Edited by: Amy Xie on Dec 21, 2010 10:41 AMHello,
After you run your code, check transaction SU53 to see if any authorization check failed. -
Message CC045 : Error reading document table AENVB
Team,
The system issues error CC045 "Error reading document table AENVB" when you choose to add more than 25 Object's under one object type( Material) in CC31 Tcode - Engineering change master record" (CHGCH)
I found corrective note Number 193954, But it facilitate only till 4.6 Version .
I need for 6.0 version. Kindly help me out.
- Muralidharan.SHi,
regarding your description of the behavior I would kindly ask you to see SAP note 672540 and use the mentioned report Z_TCC18_EHS_DEL to correct the behavior.
Best regards,
Christoph -
Error Reading Document Table AENVB
Hi,
I am working on an upgrade project, from SAP 4.6c to ECC 6.0
While running a Z transaction, it shows an error in the information box.
"Error Reading Document Table AENVB."
Please guide to resolve this issue.
It is urgent for me, I would appreciate your valuable guidance and solutions.
Thanks,
RekhaBetter option is : Debug the report from which point it is raising this Error?
2.what kind of error it is --> like SHORT Dump or syntax errror ?
3.check DB status --> like active state or any syntax in table Definations.
Regards
Prabhu -
Error Handling in table control for line item.
Hi,
Please how to do error handling in table control for line item in bdc,i have used format_message for header but i don't no fill decamps internal tabled and how to do background processing in call transaction.
ThanksBackground processing is not possible using call transaction method.
You can create an executable program which can have CALL TRANSACTION BDC code. And this can be run in background.
What do you exactly mean by Error handling for Items in table control. Can you give some more details. -
Hi ,
I have a requirement to read cluster tables data using import statement . I have to access cluster tables data based on selection criteria . Any body help me regarding this isuue .
Regards
UdayHi Uday,
Check this one:
[Extraction from cluster tables through function module|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0f46157-e1c4-2910-27aa-e3f4a9c8df33]
Re: BW extractor for ERP cluster tables
Regards,
Chandra Sekhar -
How to read Cluster Tables.
Sample program
Import and export to database is used in two programs and not in the same program.
ZPROGRAM1.
tables : indx.
Data : SALDO type i,
indxkey LIKE indx-srtfd VALUE 'ZAB1'.
indx-aedat = sy-datum.
indx-usera = sy-uname.
indx-pgmid = sy-repid.
EXPORT SALDO TO DATABASE indx(zc) ID indxkey.
In another program,
ZPROGRAM2.
tables : indx.
Data : SALDO type i,
indxkey LIKE indx-srtfd VALUE 'ZAB1'.
indx-aedat = sy-datum.
indx-usera = sy-uname.
indx-pgmid = sy-repid.
IMPORT SALDO FROM DATABASE indx(zc) ID indxkey. -
Error while creating logical port for Reporting
Hi,
In one of the training materials for Duet Enterprise, i saw the steps for creating logical port for the consumer proxy /IWTNG/CO_PXY_RECORDS_REPOSITO.
When i am trying to create the logical port, i am getting an error saying,
" SRT Framework exception: Error in WSDL access: Exception occurred in communication framework:Error in HTTP Framework:500 Native SSL error
https://<server:port>/_vti_bin/OBAFileReceiver.asmx?wsdl "
I would like to know is it really necessary to create this logical port for "Reporting Scenario" and is it not created automaticallly using the Installation Wizard??
And in case it has to be created, how to resolve this SRT framework exception?
~ Ramanath.Hi,
the consumer proxy /IWTNG/CO_PXY_RECORDS_REPOSITO was used in Duet Enterprise SP01. Now with SP02 the consume proxy /IWTNG/CO_OBAFILE_RECEIVER_SOA is created.
However, the SSL error that you are getting looks a little strange (it does not mean that there is an error, but it is worth checking):
So can you go to SOAMANAGER -> Service Administration -> Single Service Configuration. In here select "Consumer Proxy" from the "Search by", Search Pattern "/IWTNG/CO_OBAFILE_RECEIVER_SOA" and Field: Both.
You should find one entry. Select it and click "Apply Selection".
Now go to the Configurations tab. Here you should see one Logical Port with name "LOGICALPORTFORREPORTING" with Creation Type "Manually Created". In fact this logical port was created by the Wizard.
Click on Display and scroll down again. Now in the "Additional Information" tab there is a string after HTTP Destination, e.g. 0050568E3F5A1ED096F22339C44BAF83.
Copy this value and go to your SAP GUI -> Transaction SM59.
Here click on Find/Search and search for this HTTP Destination. You should find one Type G RFC Destination that has the target host of your SharePoint server and the path prefix /_vti_bin/OBAFileReceiver.asmx.
Now you can test the service. Just click on Connection Test. The result should be a HTTP Response: 200.
If not, then something went wrong with the automatic configuration and we should take another look at it (for example maybe the SSL certificate from SharePoint that was imported by the Wizard is not valid)
Regards,
Holger.
PS. Don't use the "Ping Web Service" test from SOAMANGER -- unfortunately this is not working consistently. -
FPN: No ESID found error while invoking BEx iviews for Reports.
Hi Everybody,
We have a federated portal network [FPN] setup. We are EP 7 SP15 for both Consumer portal and BI producer portal.
The content is delivered to users via RRA Remote Role Assignment ] in consumer portal for BI portal roles from Producer bi portal.
The problem is when we are trying to access BEx iviews for Reports i get the error: Internal error No esid found.
The BEx iview for Queries are running fine but the problem is for BEx iviews for Reports in consumer portal.
All reports are running fine in producer BI portal.
Consumer portal AD UME and producer portal is ABAP UME.
Please help to fix this.
Below is the trace.
#1.5 #00237DA36C70002900000015000058A7000477861BB01CF2#1257317780692#com.sap.security.core.umap.imp.UserMapping#sap.com/irj#com.sap.security.core.umap.imp.UserMapping.getInverse
MappingData(String, ISystemLandscapeObject)#J2EE_GUEST#0#####SAPEngine_Application_Thread[impl:3]_29##0#0#Info##Java###Found local user "" being mapped to backend user ""
for system .#3#USER.R3_DATASOURCE.RAMA#RAMA#"(null)"#
#1.5 #00237DA36C70002900000016000058A7000477861BBFA58B#1257317781710#com.sap.ip.bi.base.exception.BIBaseRuntimeException#sap.com/irj#com.sap.ip.bi.base.exception.BIBaseRuntimeEx
ception#RAMALINX#2777#####SAPEngine_Application_Thread[impl:3]_29##0#0#Error#1#/Applications/BI#Plain###Exception thrown: com.sap.ip.bi.base.exception.BIBaseRuntimeException:
Error: Internal error. No esid found.
com.sap.ip.bi.base.exception.BIBaseRuntimeException: Error: Internal error. No esid found.
at
com.sap.ip.bi.webapplications.runtime.jsp.portal.services.BIRuntimeService._createController(BIRuntimeService.java:687)
at
com.sap.ip.bi.webapplications.runtime.jsp.portal.services.BIRuntimeService.createController(BIRuntimeService.java:642)
at
com.sap.ip.bi.webapplications.runtime.jsp.portal.services.BIRuntimeService._handleRequest(BIRuntimeService.java:343)
at
com.sap.ip.bi.webapplications.runtime.jsp.portal.services.BIRuntimeService.handleRequest(BIRuntimeService.java:276)
at
com.sap.ip.bi.webapplications.runtime.jsp.portal.components.LauncherComponent.doContent(LauncherComponent.java:24)
at
com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at
com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at
com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest
(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at
com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at
com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest
(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at
com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run
(Dispatcher.java:524)
at java.security.AccessController.doPrivileged(AccessController.java:246)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service
(Dispatcher.java:407)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service
(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet
(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle
(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request
(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at
com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
atDarryl
Thank you for the quick reply.. I did check and the system property field was blank
I also wanted to point out that we are not experiencing this issue in our Dev enviornment, and all content was transported to Q. Only in Q are we getting this issue.
Please advise -
Error in creating Table Maintenance for TABLES: J_2IRG1BAL ,Dump error show
Dear Gurus
I have Created one Table Maintenance for TABLES: J_2IRG1BAL ,
1) I have take function group as same as table name like J_2IRG1BAL
3) Authorization Group &NC&
4) Authorization object S_TABU_DIS
5) Function group J_2IRG1BAL
6) Package J1I5
7) Maintenance type one step.
8) Maint. Screen No. Overview screen 2009.
9) Recording routine STD recording routines .
I have assign screen single screen 1 but it will not take the screen so ill put screen 2009 ,the system will not not accept the screen but I proposed to Save and activate the table maintenance generator and created and save the function group ,the table is ready to save the entries
We have to go to SM30 then put 4-5 entries ,after that a dump error shows
Which i have attachéd in this mail kindly help me out
Its effect in production server.
I have found that the error is given below I have mentioned all the details
Kindly read this
I have created function group J_2IRG1BAL and assign Package J1I5 and function group,J1I5 is already a Function group so problem occurs a dump error message displays
Kindly give me the right solution all the Clients are effected
110,100 150,250 these all are effected development clients
300 is prod client this is also affected because I have created a table maintenance generator and send the req to production .
*Dump Error Shows in Production*
Runtime Errors SYNTAX_ERROR
Date and Time 11.12.2008 09:26:30
What happened?
| Error in ABAP application program.
Error analysis
In program "SAPLJ1I5 ", the following syntax error occurred:
"The program "SAPLJ1I5" is not Unicode-compatible, according to its pro"
"gram attributes."
The current ABAP program "SAPLSVIM" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
In program "SAPLJ1I5 ", the following syntax error occurred
in the Include "SAPLJ1I5 " in line 0:
"The program "SAPLJ1I5" is not Unicode-compatible, according to its pro"
"gram attributes."
rigger Location of Runtime Error |
Program SAPLSVIM
Include LSVIMU01
Row 107
Module type (FUNCTION)
| Module Name VIEW_MAINTENANCE
Author and last person to change the Include are:
Author "TTLABAP2 "
Last changed by "TTLABAP2 "
105
Initialisierung des Abgleichsmandanten zum View *
106
>>>>>
vim_default_upgr_clnt-viewname = x_header-viewname.
108
vim_default_upgr_clnt-client = client_for_upgrade.
109
PERFORM vim_set_global_field_value IN PROGRAM (fpool)
| 110| USING 'VIM_DEFAULT_UPGR_CLNT' 'C' vim_default_upgr_clnt rc.I have send you all the details regarding the table maintenance generator
error is shown below
I have Created one Table Maintenance for TABLES: J_2IRG1BAL ,
1) I have take function group as same as table name like J_2IRG1BAL
3) Authorization Group &NC&
4) Authorization object S_TABU_DIS
5) Function group J_2IRG1BAL
6) Package J1I5
7) Maintenance type one step.
8) Maint. Screen No. Overview screen 2009.
9) Recording routine STD recording routines .
I have assign screen single screen 1 but it will not take the screen so ill put screen 2009 ,the system will not not accept the screen but I proposed to Save and activate the table maintenance generator and created and save the function group ,the table is ready to save the entries
We have to go to SM30 then put 4-5 entries ,after that a dump error shows
Which i have attachéd in this mail kindly help me out
Its effect in production server.
I have found that the error is given below I have mentioned all the details
Kindly read this
I have created function group J_2IRG1BAL and assign Package J1I5 and function group,J1I5 is already a Function group so problem occurs a dump error message displays
Kindly give me the right solution all the Clients are effected
110,100 150,250 these all are effected development clients
300 is prod client this is also affected because I have created a table maintenance generator and send the req to production .
Runtime Errors SYNTAX_ERROR
Date and Time 11.12.2008 09:26:30
ShrtText
Syntax error in program "SAPLJ1I5 ".
What happened?
Error in ABAP application program.
The current ABAP program "SAPLSVIM" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
In program "SAPLJ1I5 ", the following syntax error occurred
in the Include "SAPLJ1I5 " in line 0:
"The program "SAPLJ1I5" is not Unicode-compatible, according to its pro"
"gram attributes."
Author and last person to change the Include are:
Author "TTLABAP2 "
Last changed by "TTLABAP2 "
Error analysis
In program "SAPLJ1I5 ", the following syntax error occurred:
"The program "SAPLJ1I5" is not Unicode-compatible, according to its pro"
"gram attributes."
Trigger Location of Runtime Error
Program SAPLSVIM
Include LSVIMU01
Row 107
Module type (FUNCTION)
Module Name VIEW_MAINTENANCE
Source Code Extract
Line
SourceCde
77
TRANSPORTING NO FIELDS.
78
IF sy-subrc NE 0.
79
SELECT SINGLE * FROM tfdir WHERE funcname EQ <function_name>.
80
IF sy-subrc NE 0.
81
RAISE no_editor_function.
82
ELSE.
83
length = strlen( function_name1 ).
84
ASSIGN function_name1(length) TO <function_name>.
85
SELECT SINGLE * FROM tfdir WHERE funcname EQ <function_name>.
86
IF sy-subrc NE 0.
87
RAISE no_database_function.
88
ENDIF.
89
ENDIF.
90
INSERT x_header-viewname INTO alr_checked_views INDEX sy-tabix.
91
ELSE.
92
length = strlen( function_name1 ).
93
ASSIGN function_name1(length) TO <function_name>.
94
ENDIF.
95
96
Initialisierung der RFC-Destination zum View *
97
98
FPOOL+4 = X_HEADER-AREA.
99
fpool = x_header-fpoolname.
100
vim_default_rfc_dest-viewname = x_header-viewname.
101
vim_default_rfc_dest-rfcdest = rfc_destination_for_upgrade.
102
PERFORM vim_set_global_field_value IN PROGRAM (fpool)
103
USING 'VIM_DEFAULT_RFC_DEST' 'C' vim_default_rfc_dest rc.
104
105
Initialisierung des Abgleichsmandanten zum View *
106
>>>>>
vim_default_upgr_clnt-viewname = x_header-viewname.
108
vim_default_upgr_clnt-client = client_for_upgrade.
109
PERFORM vim_set_global_field_value IN PROGRAM (fpool)
110
USING 'VIM_DEFAULT_UPGR_CLNT' 'C' vim_default_upgr_clnt rc.
111
112
set flag if complex selection conditions in sellist *
113
114
IF complex_selconds_used NE space.
115
READ TABLE dba_sellist INDEX 1.
116
IF sy-subrc EQ 0 AND dba_sellist-cond_kind EQ space.
117
dba_sellist-cond_kind = 'C'. MODIFY dba_sellist INDEX 1.
118
ENDIF.
119
ENDIF.
120
121
direkter Vergleich: Flagge setzen usw. *
122
123
IF view_action EQ vim_direct_upgrade.
124
view_action = aendern.
125
PERFORM vim_set_global_field_value IN PROGRAM (fpool)
126
USING 'VIM_SPECIAL_MODE' 'C' vim_direct_upgrade rc. -
ALE Error + Mass deletion of variants for Reports
Hi,
I have two questions
1- is there any transaction in SAP, which delete the mass variants for reports for all users?
2- I am getting an error An Idoc without a message type was passed to the ALE layer.
I have already check file port is set up correctly and I am passing message type HROT_BRM.
This also happen in previous test, as user does not have the proper authorization, so I assign the authorization and ran it. It worked.
However, this time a user has the authorization and still the error messaging is coming. Am I missing something?
Waiting
ByeThere are some function modules like "KYVA_REPORT_VARIANTS_DELETE or get user variants "RM_GET_VARIANTS_4_REPORT_USER".
- is there any transaction in SAP, which delete the mass variants for reports for all users?
2- I am getting an error An Idoc without a message type was passed to the ALE layer.
I have already check file port is set up correctly and I am passing message type HROT_BRM.
This also happen in previous test, as user does not have the proper authorization, so I assign the authorization and ran it. It worked.
However, this time a user has the authorization and still the error messaging is coming. Am I missing something? -
Formatting error on pivot table in migrate report
Hi to everyone.
I've this problem:
I'm migrate a report from OBIEE publisher created on test environment to production environment.
The version of OBIEE publisher is the same on test and production (11.1.1.6), i' don't know which patch is installed in the 2 environment.
My problem is on a pivot table in a report, the Header measure column ha 75px Height, in test environment the full Height have the back color i've choose (Gray) while in production environment the same report with the same specs have the Header Measure column is half in GRAY (my back color choose) and half in blue (standard color of background).
If i create a new Pivot table with the same style in production ambient and in test i've the same problem.
Can someone help me for this problem?
Regards,
Fabio.Timo,
This the total code for Pivot table and to export that to Excel i think something in the below code is not supported in 11.1.1.6 and later versions. Can i use <dvt:exportPivotTableData> in commandButton ? because when i comment this code it is working fine.
<af:commandButton text="EXPORT TO EXCEL" immediate="true"
binding="#{backingBeanScope.backing_LUM_EMPLOYEE_DOCUMENTS_REPORT.export_btn}"
id="export_btn" visible="false"
inlineStyle="font-family: Verdana, Arial, Helvetica, sans-serif; font-weight: bold; font-size: small;">
<dvt:exportPivotTableData type="excelHTML" exportedId="employeeDocuments_pt"
filename="Department_TrainingDocuments_Report.xls" title="PivotTable export"/>
</af:commandButton>
<dvt:pivotTable id="employeeDocuments_pt"
value="#{bindings.lum_EmployeeDocumentsReportView1.pivotTableModel}"
binding="#{backingBeanScope.backing_LUM_EMPLOYEE_DOCUMENTS_REPORT.employeeDocuments_pt}"
var="cellData" varStatus="cellStatus" sizing="auto" summary="Enrollments"
inlineStyle="width:1400px; height:900.0px;"
rowFetchSize="-1" columnFetchSize="75">
<dvt:dataCell dataAttribute="DocumentFlag">
<af:selectBooleanCheckbox id="idselectbooleancheckbox" label="SELECT" value="#{cellData.dataValue}"
readOnly="true"/>
</dvt:dataCell>
</dvt:pivotTable>
Thanks,
Harika. -
Just want to know though BSEG is a cluster table but we can read it using Select or use SQL statements meant for transparent table. How is it possible?
Kindly clarify.
Regards
anyaHi,
there a 2 types of 'cluster' tables. The first one is a physical cluster, linking of tables sort of speak. Here you can use select statements as already described in the above answers.
see .<a href="http://help.sap.com/saphelp_47x200/helpdata/en/81/415d363640933fe10000009b38f839/frameset.htm">http://help.sap.com/saphelp_47x200/helpdata/en/81/415d363640933fe10000009b38f839/frameset.htm</a>
Another type of cluster table is the one with a fixed structure. This can be used to store data dynamically with the export statement you speak of eg. you can store an intire internal table this way or a deep structure and later on extract it again.
<a href="http://help.sap.com/saphelp_47x200/helpdata/en/fc/eb3c1f358411d1829f0000e829fbfe/frameset.htm">http://help.sap.com/saphelp_47x200/helpdata/en/fc/eb3c1f358411d1829f0000e829fbfe/frameset.htm</a> -
Error reading material cost estimate for sales order (KE292)
Dear All,
I have an issue with billing. we are posting july month transactions, the material cost is maintained through MR21. When releasing billing document for accounting we are getting error message like"Error reading the material cost estimate for sales order "11"
Message no. KE292
Diagnosis
In Profitability Analysis (CO-PA), the system tried to valuate item 000010 of sales order 11 by reading the corresponding product cost estimate.
However, no product cost estimate could be found for this sales order item.
The system accessed product costing for product AMLFP011011XX00P using costing key YB3 as defined in the
CO-PA Customizing settings.
System Response
The system cannot process the document any further.
Procedure
Check your Customizing settings."
We cross checked with other client as a current date and we ran cost estimate through CK40N with same material. and we posted entries. Here it is working fine. but in above process it is not working. Can you pls guide me where i missed.
Regards,
Nagaraju,Hi,
When the Costing Key is assigned to the material types in the COPA customizing, then system expects Cost estimation when billing is released to Accounts.
If you dont run cost estimation but update the material master through MR21, system will not accept as in the Costing key configuration you must have selected the Current Standard price field for the valuation.
Hence, try to run cost estimation and then do releasing.
Thanks & Regards
Ravi Kumar -
Is it really another error about full table scans for small tables....?????
Hi ,
I have posted the following :
Full Table Scans for small tables... in Oracle10g v.2
and the first post of Mr. Chris Antognini was that :
"I'm sorry to say that the documentation is wrong! In fact when a full table scan is executed, and the blocks are not cached, at least 2 I/O are performed. The first one to get the header block (where the extent map is stored) and the second to access the first and, for a very small table, only extent."
Is it really wrong....????
Thanks...
SimFredrik,
I do not say in any way that the documentation in this point is wrong.....
In my first post , i have inserted a link to a thread made in another forum:
Full Table Scans for small tables... in Oracle10g v.2
Christian Antognini has written that the documentation is wrong....
I'm sorry to say that the documentation is wrong!
In fact when a full table scan is executed, and the
blocks are not cached, at least 2 I/O are performed. The
first one to get the header block (where the extent map
is stored) and the second to access the first and, for a
very small table, only extent.I'm just wondering if he has right......!!!!!!!
Thanks..
Sim
Maybe you are looking for
-
Video's are missing from facebook album under photo's. It shows that I have 99 and only shows 24. These are not copyright problems. I have had them up for years. Now, I can not post any video's too. Message says that content is currently unavai
-
Hi All, How far are LDB's relevant to HR-ABAP Programming, are <u><i><b>select</b></i></u> statements absoultely obselete in HR-ABAP Programming. Here in our project we are only using select statements to retrieve date from infotypes. Is it a wron
-
Mar 14, 2010 Setup Initialization Error My computer recently crashed. I got it repaired but in the process, most of my programs were lost including Adobe PhotoShop 7.0. I tried re-installing from the CD but got an error message which read: Setup Init
-
My library is.. well.. I don't know the word.
My iTunes library is fine. But my iTunes music folder.. is missing things. Like songs I added to my Library years ago are not in the music folder. Is there a way to make iTunes put everything in the Library into its music folder? I saw this link: htt
-
Ok so in about January or Feburary, I had a gift card which i used to get some music. I went over balance and now im worried that the balance would have increased. does anyone know if thats the case?