Error: unable to connect to database using user system. please check privil

Hi All,
i have 2 oracle databases in my system (ORCL,RR). i am able to connect both databases i sql prompt. but in ggsci prompt not able to connect rr database due to below error
dblogin userid system, password tiger.
Error: unable to connect to database using user system. please check privil
Can you please help me to connect RR database also in GGSCI promt.
Thanks
Raja

Did you try with RR database tns name or sid while connecting ?
If No then try this ,
GGSCI (ATP) 6> DBLOGIN USERID SYSTEM@<tns alias name>
Password:
Successfully logged into database.
HTP
Annamalai.

Similar Messages

Error: Unable to connect to database using connection_pool

Hi experts
I have created repository and reports on my windows machine using ODBC , Now i have tranfered this to on unix with OCI, But when i am connecting to my dtabase it is showng the error:
Error: Unable to connect to database using connection_pool
Please suggest how to resolve this..

Have you install the Oracle client in your Unix server?

Installing SBO 2007 Error Unable to connect to database

Trying to install SBO 2007.
First install server tools, then sever.
The SBO -Common database exists as per checking the SQl database.
The install asked for the database server, database name, user name and password in which I enter this correctly.
A message states:
WARNING
'Unable to connect to database;verify database server name and that database is started'.
I am unable to proceed further. Can any on assit please.
Have also tried un installing SBO 2007, deleting databases and rebooting - without success.

Dear Lisa,
You will get this issue when you are using named/non-default instance of MS SQL Server during the installation progress
of SAP Business One Integration Platform.
The B1iP installation program uses default port (1433) to connect MS SQL
Server and to create database. The named instance will use the port
other than 1433.
1. Before the installation of B1iP, change the port of the named
    instance to 1433, which will be used to install B1iP.
2. If 1433 is being used by another application, and cannot be changed,
    the steps below is one walk-around way:
    a) Stop the instance of MS SQL Server, which is using the port 1433
    b) Change the named instance, which will be used to install B1iP, to
       1433 temporary, and remember the port to recover
    c) Install B1iP (or SAP Business One with B1iP component)
    d) After installation, stop the B1i service. Under B1i folder, in
       the Xcellerator.cfg, change 1433 to the port that B1iP DB
       instance used.
    e) Change back the ports of SQL Server.
    f) Run the service of SQL Server and B1i again.
Regards,
Rakesh Pati
SAP Business One Forum Team

Unable to connect to Database using Grid Control

Hi,
I am attempting to connect to my Oracle Linux Machine which has 2 databases FROM my 10g Grid control which is on a Windows XP 32 bit.
Although I can login to the actual linux box with the host and database credentials ; I cant use the same to login to the database using Grid control.
I have tried testing the connection using Grid Control >> Preferences >> Preferred Credentials >> Host ; but its just not recognizing the credentials as correct.
When I attempt to startup the database using the host and DB credentials : ERROR MESSAGE : <servername> : <servername> comes up.
My agent on linux box is up. My Listener is running fine.
On my Grid control .. i have the DB, OMS, and Agent running as well.
Any inputs on this issue, I'd appreciate very much.

Thanks for your reply.
Under Hosts on the Main Grid Console Home Page >> "server3.sam" Status shows UP. This server houses my 2 databases. But when I click on Databases >> it shows Instance DOWN.
Status
Failed
Details Failed to connect to database instance: ORA-12541: TNS:no listener (DBD ERROR: OCIServerAttach).
I have verified that my lsnrctl status is good on the linux box. My target agent is up and running on it as well.
So I try to start the STARTUP button >> I enter the HOST Credentials of the Linux box and the Database credentials which I use "SYS" (in upper case - just in case that mattered) and choose SYSDBA ;
Error Message
server3.sam: server3.sam
I created a new dba account and try to login ... dont seem to work ; I tried using SYSTEM account and even altering my sys and system passwords .. all turn out negative.
And the ANSWER to your question ---> Grid Control >> Preferences >> Preferred Credentials >> Database Instance >> corresponding to my database name ; I enter my sysdba username / password AND the host username / password of my Linux box >> TEST >> which also turns out negative.
This entry is auto filled in since I "checked" the box "Save as Preferred Credential"; initially when I tried to start the DB using the STARTUP button.
By the way, my Win XP doesnt really have a password set under User accounts.
Any suggestions please ?

Server Error in '/' Application. [COMException (0x81020024): Unable to connect to database]

Hi,
My team and I are trying to resolve this issue. some of our users are having trouble uploading data into the database. this is the error that they are getting.
I would really appreciate it if you could help me get ridd fo this issue.
Server Error in '/' Application.
Unable to connect to database. Check database connection information and make sure the database server is running.
Description:
An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details:
System.Runtime.InteropServices.COMException: Unable to connect to database. Check database connection information and make sure the database server is running.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace
below.
Stack Trace:
[COMException (0x81020024): Unable to connect to database. Check database connection information and make sure the database server is running.]
   Microsoft.SharePoint.Library.SPRequestInternalClass.PreInitServer(String bstrAbsoluteRequestUrl, String bstrServerRelativeUrl, Int32 lZone, Guid gApplicationId, Guid gSiteId, Guid gDatabaseId,
String bstrDatabaseServer, String bstrDatabaseName, String bstrDatabaseUsername, String bstrDatabasePassword, Boolean fHostHeaderIsSiteName) +0
   Microsoft.SharePoint.Library.SPRequest.PreInitServer(String bstrAbsoluteRequestUrl, String bstrServerRelativeUrl, Int32 lZone, Guid gApplicationId, Guid gSiteId, Guid gDatabaseId, String
bstrDatabaseServer, String bstrDatabaseName, String bstrDatabaseUsername, String bstrDatabasePassword, Boolean fHostHeaderIsSiteName) +359
[SPException: Unable to connect to database. Check database connection information and make sure the database server is running.]
   Microsoft.SharePoint.Library.SPRequest.PreInitServer(String bstrAbsoluteRequestUrl, String bstrServerRelativeUrl, Int32 lZone, Guid gApplicationId, Guid gSiteId, Guid gDatabaseId, String
bstrDatabaseServer, String bstrDatabaseName, String bstrDatabaseUsername, String bstrDatabasePassword, Boolean fHostHeaderIsSiteName) +479
   Microsoft.SharePoint.SPSite.PreinitializeServer(SPRequest request) +666
   Microsoft.SharePoint.SPWeb.InitializeSPRequest() +548
   Microsoft.SharePoint.SPWeb.EnsureSPRequest() +75
   Microsoft.SharePoint.SPWeb.get_Request() +74
   Microsoft.SharePoint.WebControls.SPControl.SPWebEnsureSPControl(HttpContext context) +613
   Microsoft.SharePoint.WebControls.SPControl.GetContextWeb(HttpContext context) +41
   Microsoft.SharePoint.SPContext.get_Current() +123
   CKS.EBE.BlogContext.get_BlogEnabledSite() +37
   CKS.EBE.BlogHttpModule._app_PostAuthorizeRequest(Object sender, EventArgs e) +113
   System.Web.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +80
   System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +171
the description of the error on the server is as follows:
The description for Event ID ( 27745 ) in Source ( Windows SharePoint Services 3 ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use
the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: #50071: Unable to connect to the database MOSS_Content_RBI on BartDB\Bart. Check the database connection information
and make sure that the database server is running..

are you using the Aliases for the SQL Server, make sure your account having the correct permission.
If it is your QA farm, you can run the config wizard to fix his problem...
check this post having the similar issue.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/478d6b3a-a51e-48c5-832b-5afb51c69734/unable-to-connect-to-the-sql-content-database-from-sharepoint-web-front-server?forum=sharepointadminlegacy
http://hammad1.wordpress.com/2008/06/04/unable-to-connect-to-database-in-event-logs/
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Unable to connect to database in ofline mode

Hi ,
i have server OBIEE server installed in Linux and client installed on windows7
the issue is
when i log in to admin tool on client it opens and show all tables but..
..... when i right click a table and click on view data .. it through an error 'UNABLE TO CONNECT TO DATABASE"
I HAD CHECKED THE TNS NAME S EVERY THING IS FINE
can any help in this regard

Hi,
which DB are you using? if u r using Oracle DB refer the below steps and make sure u r end
There are 3 options to work around this
1. Copy your tnsnames.ora to {Oracle_BI1}\network\admin directory & {oracle_common}\network\admin directory (only the former is needed as that is the ORACLE_HOME)
2. Or instead of tnsnames.ora source entry, use the full expanded tnsnames as shown below
(DESCRIPTION =(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.66.173)(PORT = 1521))(CONNECT_DATA =(SERVER = DEDICATED)(SERVICE_NAME = orcl)))
3) easy to connect u r DB
To configure OCI, you have to provide in the connection pool of the physical layer three parameters:
the call interface. You must choose OCI.
The data source name
The user name and password
In the data source name, you have to enter a connect identifier that can be one of the following naming methods.
//database_host[:port]/service_name
for more :
http://gerardnico.com/wiki/dat/obiee/oci
Thanks
Deva

Upgrade SBO-COMMOM SQL - unable to connect to database

Dear Experts,
I'm trying to upgarde from SAP 2007 A PL-42 to PL-49.
I have currently got SQL2000 (for legend system) running under the instance name SERVER and i have installed SQL2005 (SAP uses this) with the instance name SERVER\SQL2005, both running on the same machine called SERVER.
When i try to upgrade the SBO-COMMON database, it installs the DI and reaches a point where it asks for:-
Database Server:-              (I input SERVER\SQL2005)
Database Name:-              (SBO-COMMON)
User Name:-                     (sa)
Password:-                      (password)
When i click the NEXT button, i get the error "unable to connect to database; verify that database TCP/IP port serice is started."
I have verified that the TCP/IP ie enabled,and running on port 1433.
Addidtional Information:
During installation, it tries to access c:\windows\system32\sqljdbc_auth.dll file, when i click the NEXT button, just before i get the TCP/IP error.
Would highly appreciate the help.
Regards,
Asif

Dear Asif,
You may check these threads first:
Re: Unable to connect after migrating from SQL Server 2000 to SQL Server 2005
Re: Installing SBO 2007 Error Unable to connect to database
Thanks,
Gordon

MDM 71 - mdm console and clix - unable to connect to database server

Hi,
environment, MDM 7.1, AIX 6, Oracle 10.2.0.4 (installed as part of a standalone java AS)
i've an issue. I have installed MDM 71 via sapinst, before that I installed a standalone java application server. During the installation, i gave the 'oracle client', 'oracle home' and 'oracle sqlplus utility' to be those of the oracle database installed for the java AS.
After sapinst completed I tested my connection to the database via
tnsping <SID> = OK
sqlplus system/passwd@<SID> = OK
When i start up the mdm console (7.1.02.90) i can mount the MDM server, BUT when I try to configure the database settings i get
error 'unable to connect to database server'
I get the same error when i use clix dblist
Error: 0x84020004, Unable to connect with Database Server
Has anybody got any ideas.

To see why the MDM is not able to connect to database, do the following:
% cd /usr/sap/<SID>/MDSxx/log
% ls -ltr
You will find last updated log file with name like MDS_LogXXUX101224X164953.csv
% tail -100 MDS_LogXXUX101224X164953.csv
You will see the reason for not being able to connect. If the reason is:
",MDSAdminServerXGetAvailableReps,Oracle_DBConnection.cpp,205,,,,server_user,server_global,,,
2011-09-23T06:10:48.933,6       ,24,"Service 'SID', Schema 'system', ERROR CODE=12154 ||| ORA-12154: TNS:could not resolve the connect identifier specified
OCI Attach, try again ...
Then edit the /oracle/SID/112_64/network/admin/tnsnames.ora with entry like following:
SID.WORLD =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS =
        (COMMUNITY = SAP.WORLD)
        (PROTOCOL = TCP)
        (HOST = hostname)
        (PORT = PORT_NO)
    (CONNECT_DATA =
      (SID = SID)
      (GLOBAL_NAME = SID.WORLD)
then issue:
tnsping SID
If result is like
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (COMMUNITY = SAP.WORLD) (PROTOCOL = TCP) (HOST = hostname) (PORT = PORT_NO))) (CONNECT_DATA = (SID = SID) (GLOBAL_NAME = SID.WORLD)))
OK (0 msec)

BO 4.0 - Database error: Unable to connect to SAP BW Incomplete logon data

Hello Experts,
I have enabled a 'SSO to database' between SAP BW and Business objects by referencing to the documents related to below link.
[http://wiki.sdn.sap.com/wiki/display/BOBJ/HowtosetupSSOagainstSAPBWinSBOBI4.0forLDAPusers]
I have created a universe connection with option 'use single sign on when refreshing reports at view time' and have created a universe on top of my BEx query by log-in to the universe designer tools using my LDAP account.
Now when I run the report with either SAP account or LDAP - I am able to run a adhoc webi report on this universe and get data either through the webi rich client or via BO 4.0 Info-view/Launch Pad.
But the issue is that when other users are trying to run webi queries on this universe either through Info-view/launch pad or rich client by log-in via LDAP Authentication - they get the below error: I have given SAP_ALL to this user for time being and also have done the necessary configuration for 'simple user format' in CMC so these user has 1 account with 3 alias definitions: Enterprise, SAP, R/3.
Database error: Unable to connect to SAP BW server Incomplete logon data -
If the user logs on into the BO 4.0 Info-view/launch pad or webi rich client using his SAP authentication than he is able to run and retrieve data.
I also get a dump in the SAP BW system - I analyzed the dump in SAP BW using st22 tcode and it gives the error short text as - Incomplete logon data and run-time error - CALL_FUNCTION_SIGNON_INCOMPL
Desired outcome:
I want the users to log-in to webi rich client or BO 4.0 Launch pad/Info-view using their 'LDAP' authentication and run reports against the universe on SAP BW/BEx query without any errors or additional username/password requirements.
Can someone please tell me if I am missing any steps/configuration and guide me to achieve the above mentioned desired result ?
Any help in this matter would be greatly appreciated.
Thanks & regards,
CD.

Hi Simone,
Thank you for the reply.
Here are the things done by me.
1. Generated the keystore file and imported it in BI 4.0 CMC on SAP Authentication Option tab
    ([http://wiki.sdn.sap.com/wiki/display/BOBJ/GeneratekeystoreandcertificateforSAPBO+BI4.0])
    ([http://wiki.sdn.sap.com/wiki/display/BOBJ/SetupofSAPSSOServiceinSAPBOBI4.0+CMC])
2. Generate the certificate file cert.der and this cert is imported in SAP BW with STRUSTSSO2 transaction.
    ([http://wiki.sdn.sap.com/wiki/display/BOBJ/ImportSAPBOBI4.0certificateintoSAP+BW])
3. BW Roles/Users have been imported into CMC.
4. SAP Users and LDAP users are mapped/aliased with each other using the registry key method
    ([http://wiki.sdn.sap.com/wiki/display/BOBJ/HowtomapSAPusersandLDAPusersinSBOBI4.0+CMC])
I haven't explicitly configured STS (Security token service) as STS is a part of Adaptive processing server (APS) and I have verified that by going to servers in CMC and then to analysis services.
I have searched for SAP OSS notes related to my issue but couldn't find any note related to SAP BW SSO with Business objects 4.0. Most of the notes are relevant for BO XI 3.1 environments.
Thanks & regards,
CD.

BO 4.0: Database error:Unable to connect to SAP BW server Incomplete logon

Hello Experts,
I have enabled a 'SSO to database' between SAP BW and Business objects by referencing to the documents related to below link.
http://wiki.sdn.sap.com/wiki/display/BOBJ/HowtosetupSSOagainstSAPBWinSBOBI4.0forLDAPusers
I have created a universe connection with option 'use single sign on when refreshing reports at view time' and have created a universe on top of my BEx query by log-in to the universe designer tools using my LDAP account.
Now when I run the report with either SAP account or LDAP - I am able to run a adhoc webi report on this universe and get data either through the webi rich client or via BO 4.0 Info-view/Launch Pad.
But the issue is that when other users are trying to run webi queries on this universe either through Info-view/launch pad or rich client by log-in via LDAP Authentication - they get the below error: I have given SAP_ALL to this user for time being and also have done the necessary configuration for 'simple user format' in CMC so these user has 1 account with 3 alias definitions: Enterprise, SAP, R/3.
Database error: Unable to connect to SAP BW server Incomplete logon data -
If the user logs on into the BO 4.0 Info-view/launch pad or webi rich client using his SAP authentication than he is able to run and retrieve data.
I also get a dump in the SAP BW system - I analyzed the dump in SAP BW using st22 tcode and it gives the error short text as - Incomplete logon data and run-time error - CALL_FUNCTION_SIGNON_INCOMPL
Desired outcome:
I want the users to log-in to webi rich client or BO 4.0 Launch pad/Info-view using their 'LDAP' authentication and run reports against the universe on SAP BW/BEx query without any errors or additional username/password requirements.
Can someone please tell me if I am missing any steps/configuration and guide me to achieve the above mentioned desired result ?
Any help in this matter would be greatly appreciated.
Thanks & regards,
CD.

Whether your problem is solved?
We have the same problem in BO Mobile.
Two users from one BW-role, BO-groups; one user report is executed, another user - error incomplete logon data. In Web Intelligence both users reports succeeds.

Unable to connect to database which uses custom NLS charset

Hello,
I have custom character set installed on my database. I'm trying to connect to DB using OCI driver. On the client machine (Linux), I have Oracle 10g Release 2 installed. Custom character set is installed on the client side too and SQL*Plus connection works fine. Both NLS_LANG and ORA_NLS10 environment variables are set correctly.
When I'm trying to connect via JDBC, I'm getting the following error:
java.sql.SQLException: Character Set Not Supported !!
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:146)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:208)
     at oracle.sql.converter.CharacterSetMetaData.isFixedWidth(CharacterSetMetaData.java:924)
     at oracle.jdbc.driver.DBConversion.<init>(DBConversion.java:164)
     at oracle.jdbc.driver.T4CConnection.connect(T4CConnection.java:878)
     at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:268)
     at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:414)
     at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:165)
     at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:35)
     at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:801)
     at java.sql.DriverManager.getConnection(DriverManager.java:525)
     at java.sql.DriverManager.getConnection(DriverManager.java:171)
and so on...
The same code works fine on my computer (I have 9i client here). As I have read from various sources across the internet, Oracle 10g JDBC driver uses own character set conversation methods, encoded in orai18n.jar, it does not pay attention to NLS_LANG, etc.
So, my question is: do I need to create own character set for JDBC? And if so, is there a chance to generate it from existing .nlt files or I need to build them from scratch?

Sorry, I think it will be better if I move this post to "Globalization Support" forum : Unable to connect to database which uses custom NLS charset
This thread can be closed

Error Message: Unable to connect to Database Contact IT Dept.

Hi Everyone, there is a problem in login.
The software is working fine from long time,
Today all of a sudden while I logged into the software [which was created using oracle/reports 6i] (Version - Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production)],
I got the error saying Unable to connect to Database Contact IT Dept.
The same software is working fine in all the systems.
In only 1 system, that error message is displayed.
Thank You.

From this message, it is understood that your database connectivity credentials is not correct.
What makes you think that ? Do you know the Oracle error that caused the message ? (which is evidently generated by the application)
Recently did you changed any password - which may be hardcoded on form.
On one client only ?

We are using the Azure server for our web services. Server is generating an error "Unable to connect to the remote server". What is this error means

We are using the Azure server for our web services. Server is generating an error "Unable to connect to the remote server". What is this error means

Hello,
Did you means that you use the Windows Azure Virtual Machine DNS name as the server name in the Reporting Server Web Services URL?
For example:
Report server:http://uebi.cloudapp.net/reportserver
Report manager:http://uebi.cloudapp.net/reports
If you want to connect to Report Manager on the virtual machine from a remote computer, you should create a virtual machine TCP Endpoint and open the port in the virtual machine’s firewall. By default, the report server listens for HTTP requests
on port 80.
Reference:http://msdn.microsoft.com/en-us/library/jj992719.aspx#bkmk_ssrs_connect_2_remote_RM
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

Unable to connect to Database Error in FDM application creation

Hi All,
I have Installed Financial Data Quality Management 11.1.2.2 in my machine. Database [Oracle 11g R2 64 bit] and client[Oracle client 32 bit] also installed in the same machine.
We selected the following components while installing Oracle client[Custom installation],
Oracle Objects for OLE
Oracle Data Provider for .NET
Oracle Providers for ASP.NET
Oracle Provider for OLEDB
Complete the install.
When I tried to create FDM application it throws me the following error. Unable to connect to Database. Please check the database information and verify the database is accessible.
Kindly guide me to overcome this issue.
Thanks and Regards
Sai

Hi Sai,
first of all, you have posted FDM issue in Essbase forum. Thats the reason you didn't get replies to this issue.
To resolve this, we need to Oracle Client 32 bit first then Oracle Client 64 bit.
Install Oracle Clients completly. (As per documentation, we need to install Clients completly. Means choose Administrator, not instant client and custom)
After installing also if get same error, Goto Environment variables, Edit PATH variable and copy the 32 bit Client path to the first in the PATH variable.
Then reboot the Server and try again to create FDM application.
Thanks,
mady

TS3899 getting an error, "unable to connect to server" when trying to access his yahoo email account. no different user name/wifi is off.

getting an error, "unable to connect to server" when trying to access yahoo email account. I did not change my password, but now everytime I try to access my email from my IPhone 4s, I get the error.

Try the Yahoo mail app.

Error: unable to connect to database using user system. please check privil

Similar Messages

Maybe you are looking for