Error using XSQL to generate RSS feeds on Unix

I`m using an XSQL file used with a stylesheet to render an RSS 2.0 feed.
RSS readers can pick the feed up successfully when I used a Windows based Oracle Application server installation but not when it was migrated to a Unix based server.
Both servers do successfuly render the RSS feed into Internet Explorer as raw XML which looks identical.
Any ideas?

Check the content type of the response comming from your Unix server. There may be a different content type value for one of the HTTP header, which have some impact on your RSS reader.
Using FireFox is another way to see if there are subtille differences in the responses that IE does not detect.
Hope this helps,
Eric

Similar Messages

  • Generating RSS Feeds using files with extension .xml

    Bonjour!
    Apologies if this is not the correct forum - please redirect me if necessary.
    I am trying to create an .xml file to upload to my server allowing me to generate rss feeds on my web site. If i understand correctly (I am a beginner webmaster) for my RSS feed to be valid, the first line must read for example '<?xml version="1.0" ?>
    <rss version="0.91"> which is the case in my document until I save it! When I try to save the text file as .xml MAC OSX treats it as a Word File. I have tried saving as .txt with the same result. Trying to change the extension once the file has been uploaded to my server doesn't work either - the RSS feed validators still pick the document up as a Word file.
    http://www.immobilier.rimcka.com/rss.xml
    Could you advise, please?
    Merci

    What APP are you using to save it?
    Might drop it on FileWiz and see if it has a Type/Creator code.
    Might give BBEdit a look/try...
    http://www.barebones.com/products/bbedit/
    http://www.barebones.com/products/bbedit/featuresweb.shtml
    "Syntax coloring and function navigation support for HTML, JavaScript, Perl, PHP, Ruby, SQL, XHTML, XML, and YAML Improved!"
    Or any of these...
    http://www.versiontracker.com/php/qs.php?mode=basic&action=search&str=xml+edit&s rchArea=macosx&submit=Go

  • "Generating rss FEED" in log files?

    Does anyone know what causes these entries in coldfusion-out.log?  I see some examples of other users having these same entries in their logs but I can't figure out what causes it?
    Aug 27, 2012 13:01:03 PM Information [ajp-bio-8012-exec-17] - Generating rss FEED
    Aug 27, 2012 13:01:03 PM Information [ajp-bio-8012-exec-17] - FEED generation completed {Time taken=0 ms}

    You must put the taglib stuff in a <jsp-config> section in the web.xml. e.g.
    <jsp-config>
    <taglib>
    <taglib-uri>/WEB-INF/rssutils.tld</taglib-uri>
    <taglib-location>/WEB-INF/rssutils.tld</taglib-location>
    </taglib>
    </jsp-config>
    I put the .jar file and .tld file in the WEB-INF dir and it worked fine for me.
    I used Netbeans 6.1. For web projects it has a library folder. Use the Netbeans wizard to
    get the lib installed so the IDE works with it. Note also that the Netbeans IDE has an xml validator
    so it is easy to see if your web.xml file is valid. That is how I figured out the <jsp-config> tags were needed.
    Charlie

  • Does Dreamweaver CS3 generate RSS feed?

    Does Dreamweaver CS3, which I just got, generate RSS feed?
    Right now I'm using FeedForAll, but I'd prefer to generate my
    site's feed through Dreamweaver. (My site is SlowReads.com.) I've
    just switched to a Mac and don't want to pay for a new FeedForAll
    license.
    If Dreamweaver CS3 doesn't generate RSS feed, does anyone
    know if DreamFeeder, an extension available through Adobe's web
    site, is okay for Dreamweaver CS3? It says that it's made for MX
    & MX 2004.

    Burt,
    You certainly can do this with Dreamweaver CS3 to create RSS
    feed. You can take a look at Adobe Labs technologies for further
    details.
    Adobe Labs | Spry
    framework for Ajax technologies Also, you can learn more about
    Spry technologies within Dreamweaver Help using function key: "F1".
    Please refer to Spry link. There are pretty good information on how
    to work with Spry framework through links provided by Dreamweaver
    Help itself. Be sure to keep your computer stay connected to the
    Internet in order to make it work to connect to whatever web link
    source.
    [On edit...] Futhermore, there is a link to Spry in
    Dreamweaver Developer Center as well, just so you know.
    Adobe | Spry freamework
    for Ajax Developer Center
    [Other editing...]
    Adobe
    LiveDoc Help | Spry 1.4 Developer Guide
    Hope that helps.
    Cheers, Brian
    quote:
    Originally posted by:
    Burnt Norton
    Does Dreamweaver CS3, which I just got, generate RSS feed?
    Right now I'm using FeedForAll, but I'd prefer to generate my
    site's feed through Dreamweaver. (My site is SlowReads.com.) I've
    just switched to a Mac and don't want to pay for a new FeedForAll
    license.
    If Dreamweaver CS3 doesn't generate RSS feed, does anyone
    know if DreamFeeder, an extension available through Adobe's web
    site, is okay for Dreamweaver CS3? It says that it's made for MX
    & MX 2004.

  • Echo 360 generated RSS feeds failing to stream/download in iTunes U

    Greetings iTunes U comrades!
    We've been working with Echo 360 to isolate where the failure is on this issue and they're scratching their heads. They assure me that other institutions are successfully configuring iTunes U with Echo 360 RSS feeds, but seeing as there's no public forum for Echo 360 users, I'm hoping someone over here might be able to share their experiences with Echo feeds. This is part of our Echo 360 pilot on campus and Echo/iTunes U integration is a key area of functionality for our university. I'll try to provide a concise description of the issue:
    The Echo 360 system generates the following RSS feed:
    http://(EchoServer IP address:8080)/ess/feed?id=aa06ce62-7373-4070-9a3b-440a6c07dc3d&type=MP3
    This feed functions perfectly well in the browser, on or off campus, and we can stream the assets in the browser without issue.
    I created a course page in iTunes U, pasted the feed URL, and it accurately listed all the lectures in the course, indicating that on at least some level, the Echo server is communicating with iTunes U.
    However, when I try to stream any of those lectures, iTunes hangs at 0:00 and never progresses, but conversely never times out. And if I try to 'Get' an individual lecture or try to download the entire course via the 'Get Tracks' or 'Subscribe' options, I receive the following error in the 'Status' field on the downloads page in iTunes: "stopped (err = 404)"
    Additionally, I receive the following message via a pop-up window in iTunes:
    "There was a problem downloading (title of lecture).
    The URL "http://deimos3.apple.com/DeliverDownload/(EchoServer IP address:8080)/echocontent/0926/3/f2e2e509-af3e-4c5b-a0d8-e86305cc4c8f/audio.mp3 ?downloadKey=1246484124_d9aa3cd85bcfde6f039df5ec94361e58" could not be found on the server."
    Notice the discrepancy between the Echo feed and the iTunes U generated URL. This is my main area of concern and I am requesting any insight as to how iTunes U is parsing the Echo feed and creating that download key. (Echo support seemed unfamiliar with this issue.)
    Of particular interest: If I go through iTunes to Advanced>'Subscribe to Podcast' and paste in the echo feed, I have no trouble downloading the lectures.
    That, in essence, is the failure. I'll post troubleshooting details below.
    Thanks!
    iTunes U course page settings: I left the 'security' and 'signature' fields set to 'none.' However, problem persists with security set to 'HTTP Basic' or 'Digest Authentication.'
    Access settings: problem persists regardless of whether download access is given to 'all' or only to 'authenticated' for this course. I've tried toggling all these settings to troubleshoot the issue, to no avail.
    I've tried using "feed" in place of "http" in the Feed URL. Same issue, regardless.
    The issue is consistent with MP3, M4B, and M4V feeds.
    There doesn't seem to be any way to manipulate the feed URL via the EchoSystem Server (we're on V. 2.4), and there's no additional configuration settings for manipulating the feed via iTunes U. But iTunes U is definitely producing a different feed URL, which appears to be the point of failure.
    Insights?

    Short version: issue resolved. I can now successfully stream and download the Echo assets via RSS feeds in iTunes U.
    Long version: Well, I can't be sure exactly where the point of failure originally was. (@Duncan: I'm not sure if there was any active tweaking on the backend with the deimos feed parsing, I can't be sure what was or wasn't done on your end) That being said, on a support call with the Echo team, as an experiment, I set all access permissions to "download." I had done this previously (before Duncan's mysterious response), and the issue persisted. However, this time after setting all permissions to 'download,' I was /finally/ able to download and stream the assets. (Eureka!)
    Of course the real test was what would happen when we re-established the original access permission set, wherein unauthenticated users had 'no access'. This time, it worked! After a bunch of head-scratching, a colleague of mine elucidated that although we had 'reset' the permission structure previously, it was before Duncan and Apple may or may not have intervened on the backend, and that what we had done by changing the permission set may have been necessary for a backend RSS parsing to take hold.
    I can be sure that no modifications to the RSS XML were executed on Echo's end, but if the same is true on the iTunes U side, then I am truly perplexed. The bottom line is: I don't know why it 'works' now, but I'm not going to ask too many questions so long as it keeps working. (Thanks Duncan)

  • Why SP2013 generate RSS feed subscription link with feeds:// not feed://

    We are using SP2013 enterprise on-premise. Our users are using IE9. On any list or document library, click on top ribbon "List" -> RSS feed, it will goto a page with URL like
    /_layouts/15/listfeed.aspx?List=xxxxxxxxxxxxxxxxxxxxxx
    On the page there is a link "Subscribe this RSS feed". The link is redirecting to feeds://xxxxxxx. On my IE9 it throw a "web page cannot display" error. After some finding I think the protocol should be feed:// not feeds://. Is it a bug
    for SP2013 or MS do it by purpose?

    Hi Mark,
    Did you configure SSL for SharePoint web application(using https URL)?
    It seems that the feed protocol will change to feeds when you enable SSL for SharePoint web application.
    Please make sure that the Outlook 2013(office 2013) is installed in your environment.
    If not, install it and then compare the results.
    Thanks,
    Victoria
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Victoria Xia
    TechNet Community Support

  • What program to use to create an RSS feed for iTues.  PC-user.

    Hi! I'm a PC-user. I need to create an RSS feed for iTunes. What program do I need to use?
    Thanks,
    Charley

    Today, Sep. 24, 2006, there is on the Webpage a link
    (http://www.feedforall.com/download.htm) (Shareware)
    to the FeedForAll v2.0 BETA2 with iTunes Support.
    Read on the website:
    "FeedForAll BETA- robust RSS feed creation software with namespace support includind support for iTunes and other namespaces."

  • Using mail and its rss feed on 2 mac computers

    Hello to the mac users comunity!
    I have 2 questions here:
    1st:
    I am using for work a iMac and i am planning to use for my business trips a mac book air.
    I am using the mail and its rss feeeds, i would like to be able to read my mails and rss on both computers and above all that when i have read an email on one computer or one rss feed, it appears as "read" in the other computer
    Is this possible?
    2nd:
    I have about 20 different rss feeds folders on mail, for reading them i have to go from one rss feed folder to the other, how is it possible to view all rss feeds mixed up together in one only feed?
    Thanks a lot for your help

    Hi, no idea about RSS, chucked that about 10 tears ago,but if it's an IMAP account & you use Mail, it'll still report unread on a Ma that hasen't red it yet, unless you mark it read.

  • XSLT Error using XSQL:

    I am getting this error:
    Oracle XML Developers Kit 10.1.0.4.2 - Production
    XML-25011: Error processing XSLT stylesheet:
    file:///C:/Products/jboss-5.0.1.GA/server/default/deploy/ontrack.ear/ontrack.war/reports/manifest/container_lbl.xsl
    file:/C:/Products/jboss-5.0.1.GA/server/default/deploy/ontrack.ear/ontrack.war/reports/manifest/container_lbl.xsl:
    XML-22043: (Error) Extension function error: Method not found 'generate'
    Any ideas ?
    Thanks,

    After some shuffling of jar files, I now get:
    Oracle XML Developers Kit 10.1.0.4.2 - Production
    XML-25018: Unexpected Error Occurred processing stylesheet container_lbl.xsl
    java.lang.ClassCastException: org.apache.xerces.dom.ElementNSImpl cannot be cast to oracle.xml.parser.v2.XMLNode
    at oracle.xml.parser.v2.XSLExprValue.setExtensionValue(XSLExprValue.java:658)
    at oracle.xml.parser.v2.XSLExtFunctions.callStaticMethod(XSLExtFunctions.java:122)
    at oracle.xml.parser.v2.XPathExtFunction.evaluateMethod(XPathExtFunction.java:298)
    at oracle.xml.parser.v2.XPathExtFunction.evaluate(XPathExtFunction.java:225)
    at oracle.xml.parser.v2.XSLCopyOf.processAction(XSLCopyOf.java:103)
    at oracle.xml.parser.v2.XSLNode.processChildren(XSLNode.java:417)
    at oracle.xml.parser.v2.XSLResultElement.processAction(XSLResultElement.java:180)
    at oracle.xml.parser.v2.XSLNode.processChildren(XSLNode.java:417)
    at oracle.xml.parser.v2.XSLResultElement.processAction(XSLResultElement.java:180)
    at oracle.xml.parser.v2.XSLNode.processChildren(XSLNode.java:417)
    at oracle.xml.parser.v2.XSLForEach.processAction(XSLForEach.java:142)
    at oracle.xml.parser.v2.XSLNode.processChildren(XSLNode.java:417)
    at oracle.xml.parser.v2.XSLResultElement.processAction(XSLResultElement.java:180)
    at oracle.xml.parser.v2.XSLNode.processChildren(XSLNode.java:417)
    at oracle.xml.parser.v2.XSLResultElement.processAction(XSLResultElement.java:180)
    at oracle.xml.parser.v2.XSLNode.processChildren(XSLNode.java:417)
    at oracle.xml.parser.v2.XSLResultElement.processAction(XSLResultElement.java:180)
    at oracle.xml.parser.v2.XSLNode.processChildren(XSLNode.java:417)
    at oracle.xml.parser.v2.XSLResultElement.processAction(XSLResultElement.java:180)
    at oracle.xml.parser.v2.XSLNode.processChildren(XSLNode.java:417)
    etc...
    Any help would be most welcome,
    Thanks,
    Craig.

  • I used to have an RSS feed to a blog site which is protected by a username and password rembered by Firefox. I am now asked for those details when trying to enter the blog and despite entering them correctly I am denied entry.

    My old server (5.5. years) was failing me and loosing some random items. I have accessed this blog site for the past three years and during that period the access passwords and user names have been changed several times. Each time I asked Firefox to remember the correct details and I gained entry with no problems. Before I replaced the equipment I was continually refused entry despite entering all the correct information. I received a message telling me that I was either not entering the correct information (which according to the Blog editor I was) or that my server did not know how to connect to the RSS feed.

    Try BottomFeeder for those live feeds.
    * BottomFeeder: http://www.cincomsmalltalk.com/BottomFeeder/

  • Using xml iView to get data from URL generating rss feeds

    hi,
    I have a URL
    http://xml.weather.yahoo.com/forecastrss?p=USCA1116
    from the yahoo weather site.
    It opens XML data.
    I then created an XML iView in the following way:
    In step 3 in XML source; i typed the above URL. Clicked on Next.
    In Step 4 for Selected XML translation format I chose MY_RSS_TO_XHTMLB.
    When I preview it gives the message : Error while using XML iView, please contact your system administrator.
    I have Portal SP14.
    So as mentioned before in a forum, I went to System Administration -> System Configuration -> Service Configuration -> Applications -> com.sap.portal.ivs.httpservice-> proxy
    and changed "HTTP Proxy Host" to "proxy" and "HTTP Proxy Port" to 8080.
    Then to re start I right clicked com.sap.portal.ivs.httpservice, went to Administrate and restarted the services.
    But I still get the same message
    Error while using XML iView, please contact your system administrator.
    Can you please let me know if these 2 settings are correct.
    thx.

    Hi,
    Could you please let me know if you were able to solve this issue. Inspite of all the suggested configuration we are still getting the same error, as stated by you.
    Anyone able to overcome this issue, please reply. Also let me know if we need to consider any specific versions of portal & browser, JRE etc..
    Thanks,
    KSK

  • JavaScript error using UIXML to generate frames

    Hello all,
    I am trying to use the uix:frameBoderLayout and uix:frame elements to generate an HTML page with frames. I get a Javascript error when running the testFrame.uix in JDeveloper 9.0.3. Both MSIE and Netscape yield the same error.
    The JavaScript error is:
    JavaScript Error:
    http://20.19.205.86:8988/pssWeb-pss-context-root/testFrame.uix,
    line 1:
    _checkLoad is not defined.
    The HTML generated is:
    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
    <html dir="ltr" lang="en-US">
    <head>
    <title>Property Security System Application</title>
    <link rel="stylesheet" charset="UTF-8" type="text/css" href="/pssWeb-pss-context-root/cabo/styles/cache/blaf-en-netscape.css">
    </head>
    <body class="xc" style="background-color:#FFFFE1" onload="_checkLoad(event)" onunload="_checkUnload(event)">
    <script src="/pssWeb-pss-context-root/cabo/jsLibs/MarlinCore.js">
    </script>
    <frameset border="0" rows="100%,*">
    <frameset rows="*,0" onresize="if(!frames['_uixJS'].cached){location.reload();}">
    <frameset rows="null,*,null">
    <frame name="top" marginwidth="5" frameborder="0" marginheight="0" noresize src="topFrame.uix">
    <frame name="center" marginwidth="5" frameborder="0" marginheight="0" noresize src="centerFrame.uix">
    <frame name="bottom" marginwidth="5" frameborder="0" marginheight="0" noresize src="bottomFrame.uix">
    </frameset>
    <frame frameborder="0" marginwidth="0" marginheight="0" title="" name="_uixJS" noresize src="/pssWeb-pss-context-root/cabo/jsps/a.jsp?_t=jsCache">
    </frameset>
    <noframes>
    </noframes>
    </frameset>
    </body>
    </html>
    <!-- Created by Oracle UIX 2.1.7 -->
    _checkLoad is contained in the MarlinCore.js file.  That file should be in cabo/jslib/ directory.
    Two things strike me odd about the generated HTML code with relation to JavaScript. First, I expect to see JavaScript source files declared in the head portion. Second, the source files is declared after the onload call is made to the _checkLoad function.
    The third thing that I can see possibly causing the error is that the MarlinCore.js file is not visible to the server and therefore not delivered to the browser. But I am not certain where to find the files used by the embedded OC4J server.
    Is this a bug in 9.0.3?
    The uix files follow. All three framed pages (topFrame.uix, centerFrame.uix and bottomFrame.uix) display nicely in the uix preview and run nicely in the embedded OC4J.
    testFrame.uix
    <?xml version="1.0" encoding="windows-1252"?>
    <page xmlns="http://xmlns.oracle.com/uix/controller"
    xmlns:ctrl="http://xmlns.oracle.com/uix/controller"
    xmlns:html="http://www.w3.org/TR/REC-html40">
    <content>
    <dataScope xmlns="http://xmlns.oracle.com/uix/ui"
    xmlns:data="http://xmlns.oracle.com/uix/ui">
    <provider>
    <!-- Add DataProviders (<data> elements) here -->
    </provider>
    <contents>
    <document>
    <metaContainer>
    <!-- Set the page title -->
    <head title="Property Security System Application"/>
    </metaContainer>
    <contents>
    <body>
    <inlineStyle>
    <property name="background-color">#FFFFE1</property>
    </inlineStyle>
    <contents>
    <frameBorderLayout xmlns="http://xmlns.oracle.com/uix/ui">
    <top>
    <frame name="top" source="topFrame.uix">
    </frame>
    </top>
    <center>
    <frame name="center" source="centerFrame.uix">
    </frame>
    </center>
    <bottom>
    <frame name="bottom" source="bottomFrame.uix">
    </frame>
    </bottom>
    </frameBorderLayout>
    </contents>
    </body>
    </contents>
    </document>
    </contents>
    </dataScope>
    </content>
    </page>
    topFrame.uix
    <?xml version="1.0" encoding="windows-1252"?>
    <page xmlns="http://xmlns.oracle.com/uix/controller"
    xmlns:ctrl="http://xmlns.oracle.com/uix/controller"
    xmlns:html="http://www.w3.org/TR/REC-html40">
    <content>
    <dataScope xmlns="http://xmlns.oracle.com/uix/ui"
    xmlns:data="http://xmlns.oracle.com/uix/ui">
    <provider>
    <!-- Add DataProviders (<data> elements) here -->
    </provider>
    <contents>
    <document>
    <metaContainer>
    <!-- Set the page title -->
    <head title=""/>
    </metaContainer>
    <contents>
    <pageLayout>
    <contents>
    <text text ="Top frame"></text>
    </contents>
    </pageLayout>
    </contents>
    </document>
    </contents>
    </dataScope>
    </content>
    <handlers>
    <!-- Add EventHandlers (<event> elements) here -->
    </handlers>
    </page>
    center Frame.uix
    <?xml version="1.0" encoding="windows-1252"?>
    <page xmlns="http://xmlns.oracle.com/uix/controller"
    xmlns:ctrl="http://xmlns.oracle.com/uix/controller"
    xmlns:html="http://www.w3.org/TR/REC-html40">
    <content>
    <dataScope xmlns="http://xmlns.oracle.com/uix/ui"
    xmlns:data="http://xmlns.oracle.com/uix/ui">
    <provider>
    <!-- Add DataProviders (<data> elements) here -->
    </provider>
    <contents>
    <document>
    <metaContainer>
    <!-- Set the page title -->
    <head title=""/>
    </metaContainer>
    <contents>
    <pageLayout>
    <contents>
    <text text="center frame"></text>
    </contents>
    </pageLayout>
    </contents>
    </document>
    </contents>
    </dataScope>
    </content>
    <handlers>
    <!-- Add EventHandlers (<event> elements) here -->
    </handlers>
    </page>
    bottomFrame.uix
    <?xml version="1.0" encoding="windows-1252"?>
    <page xmlns="http://xmlns.oracle.com/uix/controller"
    xmlns:ctrl="http://xmlns.oracle.com/uix/controller"
    xmlns:html="http://www.w3.org/TR/REC-html40">
    <content>
    <dataScope xmlns="http://xmlns.oracle.com/uix/ui"
    xmlns:data="http://xmlns.oracle.com/uix/ui">
    <provider>
    <!-- Add DataProviders (<data> elements) here -->
    </provider>
    <contents>
    <document>
    <metaContainer>
    <!-- Set the page title -->
    <head title=""/>
    </metaContainer>
    <contents>
    <pageLayout>
    <contents>
    <text text="bottom frame"></text>
    </contents>
    </pageLayout>
    </contents>
    </document>
    </contents>
    </dataScope>
    </content>
    <handlers>
    <!-- Add EventHandlers (<event> elements) here -->
    </handlers>
    </page>
    Your assistance is appreciated,
    Bill

    Did you create the files with JDev 903 preview or JDEV 902? If you created with JDEV 902 and upgraded your project to
    903 you need to delete all the files in the cabo directory in your public_html directory. That should get rid of your
    javascript errors.

  • ParseTDS error using XSQL demos

    I recently installed the Oracle XSQL servlet engine. When I try one of the demos that make use of object views, I get the following error message:
    <?xml version="1.0" encoding="UTF-8" ?>
    <ERROR>oracle.xml.sql.OracleXMLSQLException: Fout bij ontleden typedescriptor: parseTDS</ERROR>
    There is some Dutch in this, which is a bit odd, but the text "Fout bij ontleden typedescriptor" means "Error parsing type descriptor". What could be wrong?

    I am using an Oracle 8.1.6 server. On the machine that runs the XSQL servlet, I have an 8.0.5 Net8 connection, but I assume that this is not important, since this should not be used by the Oracle JDBC driver. All examples work as long as the objecty views are not used.
    I don't know how this parser works internally, but I think it might have something to do with the absence of some of the field names in the query result.
    Here's what I mean: when I try the insurance demo, and select example three, I get the correct result. When I execute the associated query in SQL*Plus, I get the following result:
    SQL> select c.claimpolicy.primaryinsured as Customer
    2 from insurance_claim_view c
    3 where c.claimpolicy.primaryinsured.homeaddress.state = 'CA'
    4 ;
    CUSTOMER(CUSTOMERID, FIRSTNAME, LASTNAME, HOMEADDRESS(STREET, CITY, STATE, ZIP))
    POLICYHOLDER_T(1044, 'Paul', 'Astoria', ADDRESS_T('123 Cherry Lane', 'SF', 'CA', 94132))
    POLICYHOLDER_T(1044, 'Paul', 'Astoria', ADDRESS_T('123 Cherry Lane', 'SF', 'CA', 94132))
    POLICYHOLDER_T(1045, 'Martina', 'Boyle', ADDRESS_T('55 Belden Place', 'SF', 'CA', 94102))
    POLICYHOLDER_T(1045, 'Martina', 'Boyle', ADDRESS_T('55 Belden Place', 'SF', 'CA', 94102))
    As you can see, all field names, which serve as tags in the XML result, are present. From this result, you can derive that there is a sub-object HOME_ADDRESS consisting of the fields STREET, CITY, STATE and ZIP.
    For insurance example four, the result in SQL*Plus looks like this:
    SQL> select v.claimpolicy.primaryinsured.homeaddress as address,
    2 v.settlements
    3 from insurance_claim_view v
    4 ;
    ADDRESS(STREET, CITY, STATE, ZIP)
    SETTLEMENTS(PAYDATE, AMOUNT, APPROVER)
    ADDRESS_T('123 Cherry Lane', 'SF', 'CA', 94132)
    SETTLEMENTS_T(PAYMENT('05-JAN-99', 7600, 'JCOX'))
    ADDRESS_T('123 Cherry Lane', 'SF', 'CA', 94132)
    SETTLEMENTS_T(PAYMENT('15-MAR-98', 1800, 'MFOX'), PAYMENT('23-MAR-98', 7800, 'ULOWE'))
    ADDRESS_T('55 Belden Place', 'SF', 'CA', 94102)
    SETTLEMENTS_T(PAYMENT('01-JUL-97', 1500, 'JCOX'))
    ADDRESS_T('55 Belden Place', 'SF', 'CA', 94102)
    SETTLEMENTS_T(PAYMENT('05-JAN-99', 7600, 'JCOX'))
    The result contains a reference to the object PAYMENT, but the definition of this object cannot be derived from the column names.
    If the parser indeed uses these column names to derive an object structure, this may be the cause, but the question is: what went wrong during the installation that caused this problem?

  • Error using XSQL 10 servlet

    I am using the XSQL servlet from the xdk_nt_10_1_0_2_0_production.zip package. When I run a example I always get the following error (NoSuchMethodError) I am using the xmlparserv2.jar from the xdk\lib dir. What could be wrong?
    java.lang.NoSuchMethodError
    at oracle.xml.util.QxName.<init>(QxName.java:65)
    at oracle.xml.util.QxNameHash.add(QxNameHash.java:116)
    at oracle.xml.util.QxNameHash.create(QxNameHash.java:72)
    at oracle.xml.parser.v2.XMLEntity.<init>(XMLEntity.java:136)
    at oracle.xml.parser.v2.XMLEntity.<init>(XMLEntity.java:156)
    at oracle.xml.parser.v2.DTD.<clinit>(DTD.java:1031)
    at oracle.xml.parser.v2.NonValidatingParser.<init>(NonValidatingParser.j
    ava:155)
    at oracle.xml.parser.v2.XMLParser.<init>(XMLParser.java:150)
    at oracle.xml.parser.v2.DOMParser.<init>(DOMParser.java:84)
    at oracle.xml.xsql.XSQLParserHelper.parse(XSQLParserHelper.java:104)
    at oracle.xml.xsql.XSQLConfigManager.reloadConfigFile(XSQLConfigManager.java:315)

    I am also getting the same error with the following call;
    OracleXMLSave xs2 = new OracleXMLSave(this.dbConnection,
    LimitsWorkflowXDKObjectDAO.LIMITS_WF_O_TABLE);
    if ( xs2 == null ) System.out.println("XML_SAVE IS NULL");
    else
    xs2.setKeyColumnList(pkArray);
    xs2.setIgnoreCase(true);
    xs2.setRowTag(LimitsWorkflowXDKObjectDAO.LIMITS_WF_O_ROW_TAG);
    if (dateFormat != null)
    xs2.setDateFormat(dateFormat);
    rows = xs2.insertXML(xmlDoc);
    javax.xml.namespace.QName.(Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;)V
         at oracle.xml.util.QxName.(QxName.java:65)
         at oracle.xml.util.QxNameHash.add(QxNameHash.java:116)
         at oracle.xml.util.QxNameHash.create(QxNameHash.java:72)
         at oracle.xml.parser.v2.XMLEntity.(XMLEntity.java:136)
         at oracle.xml.parser.v2.XMLEntity.(XMLEntity.java:156)
         at oracle.xml.parser.v2.DTD.(DTD.java:1031)
         at oracle.xml.parser.v2.NonValidatingParser.(NonValidatingParser.java:155)
         at oracle.xml.parser.v2.XMLParser.(XMLParser.java:150)
         at oracle.xml.parser.v2.DOMParser.(DOMParser.java:84)
         at oracle.xml.sql.dml.OracleXMLSave.initParser(OracleXMLSave.java:300)
         at oracle.xml.sql.dml.OracleXMLSave.saveXML(OracleXMLSave.java:2370)
         at oracle.xml.sql.dml.OracleXMLSave.insertXML(OracleXMLSave.java:1352)

  • Problem submitting RSS feed

    I am trying to launch my podcast on iTunes, and I'm using a Soundcloud-generated RSS feed. But I keep getting an error message when I sumit it to iTunes: Invalid XML: Error on line 191:The reference to entity "a" must end with the ';' delimeter
    The URL of the feed is http://feeds.soundcloud.com/users/soundcloud:users:18637591/sounds.rss
    I cannot understand how to fix this, and when I try to validate the feed, everything seems to be fine: http://validator.w3.org/feed/check.cgi?url=http%3A%2F%2Ffeeds.soundcloud.com%2Fu sers%2Fsoundcloud%3Ausers%3A18637591%2Fs…
    Does anybody understand what is the reason behind this error?

    The URL you give redirects to http://utenfilter.net/feed/ when submitted to a feed validator, but when viewed in a browser it redirects to http://utenfilter.net/ which is a web page. When subscribing the URL you gave manually to iTunes the feed comes up empty but it works with http://utenfilter.net/feed/
    Evidently the Store, like the iTunes application, is reading the web page version - this does have more than 191 lines and the coding on line 191 has an 'a' variable so that's evidently the error they are reporting. The real feed doesn't have as many as 191 lines.
    You need to submit http://utenfilter.net/feed/ to the Store; the URL you initially gave is not useful (all these redirects are a quick way of causing problems).

Maybe you are looking for

  • Changing structure of tables

    Hi all, I would like to know whether it is possible to change the structure of tables in Visual Composer. As far as I know it is only possible to put characteristics and key figures in the colums of the table. However, I would like to put some charac

  • Display in Explorer

    My website displays fine in Mozilla Firefox, but shows a lot of blank space in Internet Explorer. Can someone help with browser display?

  • Are Director 12 projectors NOT compatible with Mac OS X Leopard (10.5.8)?

    I have a user running Mac OSX Leopard (10.5.8), and when he launches the software it says "this application cannot run." It then takes him to the adobe shockwave 12 download page. The projector is build on Adobe Director 12. It loads fine on versions

  • Problem upgrading from version 4.3 to 5

    hi, I bought my ipad 2 yesterday. here is what happenned. 1. When I connected it to iTunes on PC, it prompted for an upgrade from the current version of 4.3 to 5. I said yes. 2. It took a couple of hours to download the file. 3. After that it has fro

  • Making IP Address field - help needed

    Hi All, Can anyone tell me how to make the IP Address field as displayed in windows operating system network settings. Actually I have made one IP field using JFormattedTextField and MaskFormatter class. code is given below: private MaskFormatter get