Error when adding second server to pool
I've setup a system completely with OV Manager and it worked quite well with one server. Then I installed a second server with OVS and added it to my Pool.
But no VM can be started on this server because the cfg and disk files are only on the first server. So I think there have to be some shared mounts, but I found nothing in the docs. Is there a description somewhere?
servers in the same pool must have same view on storages, i.e. /OVS and /OVS/<uuid>(file system mounted throu /usr/lib/ovs/ovs-makerepos) must be shared.
for /OVS you must manully mount it on each of the servers,
for /OVS/<uuid>, ovs-makerepos must run on each servers, which will mount the shared storage.
Similar Messages
-
Error when adding Essbase server...
Hi,
I installed Hyperion System 9.3.1 in my development machine and encounter the following error when adding a Essbase server in AAS for the first time.
Error: 1042017: Network error: The client or server timed out waiting to receive data using TCP/IP. Check network connections. Increase the NetRetryCount and/or NetDelay values in the ESSBASE.CFG file. Update this file on both client and server. Restart the client and try again.
I used the default user "admin" and password "password". I used my servername:10080 as the server name. I hope I am right.
Why is this happening? I tried changing netdelay settings but still get the same. Is this something else? Does this have anything to do with my TCP/IP settings? I am installing this on a virtual PC.
I couldn't find an answer in previous posts.
regards
hThe things that come to mind:
The server name you use should be the name of the virtual PC, not the machine it's running on. Also, depending on the settings for the Virtual PC environment, you may have to change the network options to allow it to be visible to the network, be in the right domain, etc...
The above may or may not get you any closer, the error message itself is just saying it can't receive a response from the server, which means the server never got the request or can't send a response back.
Good Luck, -
JavaScript Error when adding the Server Behaviors for insert Record in php_mysql
Hi guys,
I am using Adobe DreamWeaver CS4.
Here is the Scenerio, i am doing php mysql driven website.
While adding the server behavior for insert record i got following error
Plz help me..
Thanks in Advance
RafelNashHave you found a fix to this??
-
Getting an exception error when adding a server to a cluster
I am using WL 6.0 and have configured a "Machine", two "Servers" and a
"Cluster", and I want to create two servers on a single machine in order to
test some clustering issues.
I am using the default "myserver" as one of the servers. I have selected
the "machine" that I have configured in the "Machine" section for each of
the servers.
In the ""Cluster Address" of the configured cluster I have typed the comma
seperated list of the IP's of the configured servers and ":7001".
Now when I go to add one server (the default myserver) to the cluster I get
the below error.
Can anyone tell me what might be causing the error.
<Error> <HTTP> <[WebAppServletContext(4344699,cons
ole)] exception raised on '/console/panels/mbean/Cluster.jsp'
java.lang.NullPointerException
at
weblogic.servlet.internal.HttpServer.setServerList(HttpServer.java:25
1)
at weblogic.servlet.internal.HttpServer.getHash(HttpServer.java:270)
at
weblogic.servlet.internal.ServletResponseImpl.writeHeaders(ServletRes
ponseImpl.java:659)
at
weblogic.servlet.internal.ServletOutputStreamImpl.flush(ServletOutput
StreamImpl.java:124)
at
weblogic.servlet.internal.ServletOutputStreamImpl.flushWithCheck(Serv
letOutputStreamImpl.java:451)
at
weblogic.servlet.internal.ServletOutputStreamImpl.print(ServletOutput
StreamImpl.java:243)
at weblogic.servlet.jsp.JspWriterImpl.print(JspWriterImpl.java:139)
at weblogic.management.console.tags.BaseTag.print(BaseTag.java:118)
at
weblogic.management.console.tags.TabbedDialogTag.printImageTag(Tabbed
DialogTag.java:668)
at
weblogic.management.console.tags.TabbedDialogTag.printTab(TabbedDialo
gTag.java:575)
at
weblogic.management.console.tags.TabbedDialogTag.printStart(TabbedDia
logTag.java:253)
at
weblogic.management.console.tags.TabbedDialogTag.doStartTag(TabbedDia
logTag.java:209)
at
weblogic.management.console.pages._panels._mbean._cluster._jspService
(_cluster.java:670)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:208)
at
weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppSe
rvletContext.java:1127)
at
weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestIm
pl.java:1529)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
>
If you send me the config.xml file I can check it out. I don't have any problems
with a comma delimited list.
Cheers,
-- Prasad
John Boyd wrote:
> Thanks for the response, but I meant to say that I have done just the IP's
> and also tried it with ":7001", which is how it is shown in the
> documentation when using a comma seperated list of IP addresses. Either
> way, I am having the problem.
>
> "Prasad Peddada" <[email protected]> wrote in message
> news:[email protected]...
> > John,
> >
> > You don't have to give :7001 for cluster address. Its just ip
> addresses.
> >
> > -- Prasad
> >
> > John Boyd wrote:
> >
> > > I am using WL 6.0 and have configured a "Machine", two "Servers" and a
> > > "Cluster", and I want to create two servers on a single machine in order
> to
> > > test some clustering issues.
> > >
> > > I am using the default "myserver" as one of the servers. I have
> selected
> > > the "machine" that I have configured in the "Machine" section for each
> of
> > > the servers.
> > >
> > > In the ""Cluster Address" of the configured cluster I have typed the
> comma
> > > seperated list of the IP's of the configured servers and ":7001".
> > >
> > > Now when I go to add one server (the default myserver) to the cluster I
> get
> > > the below error.
> > >
> > > Can anyone tell me what might be causing the error.
> > >
> > > <Error> <HTTP> <[WebAppServletContext(4344699,cons
> > > ole)] exception raised on '/console/panels/mbean/Cluster.jsp'
> > > java.lang.NullPointerException
> > > at
> > > weblogic.servlet.internal.HttpServer.setServerList(HttpServer.java:25
> > > 1)
> > > at
> weblogic.servlet.internal.HttpServer.getHash(HttpServer.java:270)
> > > at
> > > weblogic.servlet.internal.ServletResponseImpl.writeHeaders(ServletRes
> > > ponseImpl.java:659)
> > > at
> > > weblogic.servlet.internal.ServletOutputStreamImpl.flush(ServletOutput
> > > StreamImpl.java:124)
> > > at
> > > weblogic.servlet.internal.ServletOutputStreamImpl.flushWithCheck(Serv
> > > letOutputStreamImpl.java:451)
> > > at
> > > weblogic.servlet.internal.ServletOutputStreamImpl.print(ServletOutput
> > > StreamImpl.java:243)
> > > at
> weblogic.servlet.jsp.JspWriterImpl.print(JspWriterImpl.java:139)
> > > at
> weblogic.management.console.tags.BaseTag.print(BaseTag.java:118)
> > > at
> > > weblogic.management.console.tags.TabbedDialogTag.printImageTag(Tabbed
> > > DialogTag.java:668)
> > > at
> > > weblogic.management.console.tags.TabbedDialogTag.printTab(TabbedDialo
> > > gTag.java:575)
> > > at
> > > weblogic.management.console.tags.TabbedDialogTag.printStart(TabbedDia
> > > logTag.java:253)
> > > at
> > > weblogic.management.console.tags.TabbedDialogTag.doStartTag(TabbedDia
> > > logTag.java:209)
> > > at
> > > weblogic.management.console.pages._panels._mbean._cluster._jspService
> > > (_cluster.java:670)
> > > at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
> > > at
> > > weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
> > > pl.java:208)
> > > at
> > > weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppSe
> > > rvletContext.java:1127)
> > > at
> > > weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestIm
> > > pl.java:1529)
> > > at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
> > > at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
> > > >
> >
Cheers
- Prasad
-
Security Error when starting the server - WPLS 7.0
Security Error when starting the server - WPLS 7.0
what may be the reason ...
console :
BUILD SUCCESSFUL
Total time: 3 seconds
Starting WebLogic Server...
<May 30, 2005 4:22:15 PM IST> <Notice> <Management> <140005> <Loading configuration C:\cpDomain\.\config.xml>
<May 30, 2005 4:22:18 PM IST> <Info> <Logging> <000000> <FileLogger Opened at C:\cpDomain\portalServer\weblogi
c.portalServer.log>
<May 30, 2005 4:22:21 PM IST> <Info> <Security> <090516> <The RoleMapper provider has preexisting LDAP data.>
<May 30, 2005 4:22:21 PM IST> <Info> <Security> <090516> <The Authorizer provider has preexisting LDAP data.>
<May 30, 2005 4:22:21 PM IST> <Info> <Security> <090143> <The weblogic keystore provider DefaultKeyStore in re
alm cprealm cannot be used for private keys because its configured private key keystore file wlDefaultKeyStore
.jks does not exist.>
<May 30, 2005 4:22:21 PM IST> <Info> <Security> <090142> <The weblogic keystore provider DefaultKeyStore in re
alm cprealm cannot be used for trusted (root) CAs because its trusted (root) CA keystore was not configured.>
<May 30, 2005 4:22:21 PM IST> <Notice> <Security> <090082> <Security initializing using realm cprealm.>
<May 30, 2005 4:22:21 PM IST> <Critical> <WebLogicServer> <000364> <Server failed during initialization. Excep
tion:java.lang.SecurityException: Authentication for user weblogic denied
java.lang.SecurityException: Authentication for user weblogic denied
at weblogic.security.service.SecurityServiceManagerDelegateImpl.doBootAuthorization(SecurityServiceMan
agerDelegateImpl.java:411)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize(SecurityServiceManagerDeleg
ateImpl.java:539)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:917)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
>
<May 30, 2005 4:22:21 PM IST> <Emergency> <WebLogicServer> <000342> <Unable to initialize the server: Fatal in
itialization exception
Throwable: java.lang.SecurityException: Authentication for user weblogic denied
java.lang.SecurityException: Authentication for user weblogic denied
at weblogic.security.service.SecurityServiceManagerDelegateImpl.doBootAuthorization(SecurityServiceMan
agerDelegateImpl.java:411)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize(SecurityServiceManagerDeleg
ateImpl.java:539)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:917)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
>
The WebLogic Server did not start up properly.
Exception raised:
java.lang.SecurityException: Authentication for user weblogic denied
at weblogic.security.service.SecurityServiceManagerDelegateImpl.doBootAuthorization(SecurityServiceMan
agerDelegateImpl.java:411)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize(SecurityServiceManagerDeleg
ateImpl.java:539)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:917)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
Reason: Fatal initialization exception
Throwable: java.lang.SecurityException: Authentication for user weblogic denied
java.lang.SecurityException: Authentication for user weblogic denied
at weblogic.security.service.SecurityServiceManagerDelegateImpl.doBootAuthorization(SecurityServiceMan
agerDelegateImpl.java:411)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize(SecurityServiceManagerDeleg
ateImpl.java:539)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:917)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
C:\cpDomain\bin>
Thanks
Thanks & Regards,
Siva VP,
[email protected]Looks like you cannot connect to LDAP. Are you configured correctly?
-
Library error when adding contact or when logging in
The messenger server has a replica of the partition holding the users.
It's an OES 2 sp2 server, and the GW Messenger is 2.04.
Sometimes we see an error that says 'Library error' when adding a contact, or it doesn't show all users that exists with the search parameter given.
We also sporadically see a 'Library error' when some users log in to it.
Looking in the log I see an error that says 0xAE16 when users log in fails.
I can find the 0xAE11 error in the TID's but not the 0xAE16, I did find an article on the forums, mentioning this problem http://forums.novell.com/novell-prod...or-server.html, they mention memory problems, so it seems to me there is a bug that needs fixing.I've disabled the '/diruseralias-"Internet EMail Address"' setting that was set up in the strtup.ma and strtup.aa scripts.
I've also, for now at least, chosen another replica.
I haven't seen the errors yet, so here's hoping... -
Error when adding a partition to a materlialized view
Hi,
I am getting this error when adding a partition to a materialized view.
ALTER MATERIALIZED VIEW mvedw.MV_CLM_CAPITN_F ADD PARTITION MAR2013 VALUES LESS THAN ('201304')
ERROR at line 1:
ORA-14074: partition bound must collate higher than that of the last partition
Please advise.
Regards,
NarayanSQL> select TABLE_OWNER,TABLE_NAME,PARTITION_NAME,HIGH_VALUE from dba_tab_partitions where table_name =
'MV_CLM_CAPITN_F' order by PARTITION_NAME 2
3 ;
TABLE_OWNER TABLE_NAME PARTITION_NAME HIGH_VALUE
MVEDW MV_CLM_CAPITN_F APR2009 '200905'
MVEDW MV_CLM_CAPITN_F APR2010 '201005'
MVEDW MV_CLM_CAPITN_F APR2011 '201105'
MVEDW MV_CLM_CAPITN_F APR2012 '201205'
MVEDW MV_CLM_CAPITN_F AUG2009 '200909'
MVEDW MV_CLM_CAPITN_F AUG2010 '201009'
MVEDW MV_CLM_CAPITN_F AUG2011 '201109'
MVEDW MV_CLM_CAPITN_F AUG2012 '201209'
MVEDW MV_CLM_CAPITN_F DEC2008 '200901'
MVEDW MV_CLM_CAPITN_F DEC2009 '201001'
MVEDW MV_CLM_CAPITN_F DEC2010 '201101'
TABLE_OWNER TABLE_NAME PARTITION_NAME HIGH_VALUE
MVEDW MV_CLM_CAPITN_F DEC2012 '201301'
MVEDW MV_CLM_CAPITN_F FEB2009 '200903'
MVEDW MV_CLM_CAPITN_F FEB2010 '201003'
MVEDW MV_CLM_CAPITN_F FEB2011 '201103'
MVEDW MV_CLM_CAPITN_F FEB2012 '201203'
MVEDW MV_CLM_CAPITN_F FEB2013 '201303'
MVEDW MV_CLM_CAPITN_F JAN2009 '200902'
MVEDW MV_CLM_CAPITN_F JAN2010 '201002'
MVEDW MV_CLM_CAPITN_F JAN2011 '201102'
MVEDW MV_CLM_CAPITN_F JAN2012 '201202'
MVEDW MV_CLM_CAPITN_F JAN2013 '201302'
TABLE_OWNER TABLE_NAME PARTITION_NAME HIGH_VALUE
MVEDW MV_CLM_CAPITN_F JUL2009 '200908'
MVEDW MV_CLM_CAPITN_F JUL2010 '201008'
MVEDW MV_CLM_CAPITN_F JUL2011 '201108'
MVEDW MV_CLM_CAPITN_F JUL2012 '201208'
MVEDW MV_CLM_CAPITN_F JUN2009 '200907'
MVEDW MV_CLM_CAPITN_F JUN2010 '201007'
MVEDW MV_CLM_CAPITN_F JUN2011 '201107'
MVEDW MV_CLM_CAPITN_F JUN2012 '201207'
MVEDW MV_CLM_CAPITN_F MAR2009 '200904'
MVEDW MV_CLM_CAPITN_F MAR2010 '201004'
MVEDW MV_CLM_CAPITN_F MAR2011 '201104'
TABLE_OWNER TABLE_NAME PARTITION_NAME HIGH_VALUE
MVEDW MV_CLM_CAPITN_F MAR2012 '201204'
MVEDW MV_CLM_CAPITN_F MAR2013 '201304'
MVEDW MV_CLM_CAPITN_F MAY2009 '200906'
MVEDW MV_CLM_CAPITN_F MAY2010 '201006'
MVEDW MV_CLM_CAPITN_F MAY2011 '201106'
MVEDW MV_CLM_CAPITN_F NOV2009 '200912'
MVEDW MV_CLM_CAPITN_F NOV2010 '201012'
MVEDW MV_CLM_CAPITN_F NOV2012 '201212'
MVEDW MV_CLM_CAPITN_F OCT2009 '200911'
MVEDW MV_CLM_CAPITN_F OCT2010 '201011'
MVEDW MV_CLM_CAPITN_F OCT2011 '201111'
TABLE_OWNER TABLE_NAME PARTITION_NAME HIGH_VALUE
MVEDW MV_CLM_CAPITN_F OCT2012 '201211'
MVEDW MV_CLM_CAPITN_F SEP2009 '200910'
MVEDW MV_CLM_CAPITN_F SEP2010 '201010'
MVEDW MV_CLM_CAPITN_F SEP2011 '201110'
MVEDW MV_CLM_CAPITN_F SEP2012 '201210'
These are the list of partitions available.
Regards,
Narayan -
"Not an executable or is a link" errors when starting Messaging Server
"Not an executable or is a link" errors when starting Messaging Server
<P>
If Calendar Server 3.x has been installed to the same server root
as Messaging server, it is possible that the command 'NscpMail start'
to restart the server will return a string of errors:
# /etc/NscpMail start
19971207145610:Dispatch:Notification:Local Module
(Account-Handler) is not a n executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Account-Manager) is not a n executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(AutoReply-Handler) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Configuration-Manager) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Error-Handler) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Mailbox-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Program-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(SMTP-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(SMTP-Router) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(UNIX-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(Finger-Server) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(IMAP4-Server) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(POP3-Server) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(SMTP-Accept) is not an executable or is a link.
Module not loaded.
Startup Problem:
Module Error-Handler is required for proper operation.
Netscape Messaging Server Exiting!
The Calendar server 3.x installation may have changed the permissions
on [server-root]/bin directory from 755 to 750. Simply issue the
command (as root) 'chmod 755 [server-root]/bin' and then start
the server with the 'NscpMail start' command, and it should start
without a problem."Not an executable or is a link" errors when starting Messaging Server
<P>
If Calendar Server 3.x has been installed to the same server root
as Messaging server, it is possible that the command 'NscpMail start'
to restart the server will return a string of errors:
# /etc/NscpMail start
19971207145610:Dispatch:Notification:Local Module
(Account-Handler) is not a n executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Account-Manager) is not a n executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(AutoReply-Handler) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Configuration-Manager) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Error-Handler) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Mailbox-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Program-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(SMTP-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(SMTP-Router) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(UNIX-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(Finger-Server) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(IMAP4-Server) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(POP3-Server) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(SMTP-Accept) is not an executable or is a link.
Module not loaded.
Startup Problem:
Module Error-Handler is required for proper operation.
Netscape Messaging Server Exiting!
The Calendar server 3.x installation may have changed the permissions
on [server-root]/bin directory from 755 to 750. Simply issue the
command (as root) 'chmod 755 [server-root]/bin' and then start
the server with the 'NscpMail start' command, and it should start
without a problem. -
Got Error when creating application server connection
Hi Guys...I am using SOA 10.1.3.1.0
I got the following error when creating application server connection
In Step 1:
I selected the Connection type as Standalone OC4J 10.1.3 (Why because I use this one)
In Step 2:
In this step I gave username and password (same username and password to connect to BPEL console)to authenticate connection
In step 3:
It is asking for Hostname, RMI port and URL path. My computer name is gopal-computer. I gave this hostname. RMI port number is 23791 by default. I kept this one as it is and URL path optional I think. I did not give any thing.
In step 4:
When I hit the test connection button its giving the following error
Error while getting remote MBeanServer for url: ormi://gopal-computer:23791/default:
Error reading application-client descriptor: Error communicating with server: Connection refused: connect; nested exception is:
javax.naming.CommunicationException: Connection refused: connect [Root exception is java.net.ConnectException: Connection refused: connect]
Please help me.
Thanks,
Gopal.....For SOA Suite connection you should choose "Oracle application server 10g 10.1.3"
-
Error when configuring Siebel Server in Windows server 2003
Hi
I am getting below error when configuring Siebel server in Windows server 2003 VM. All the ODBC connections and SADMIN user id & password and gateway host name and port everything correct. Able to ping and telnet to gateway port 2320. Please help on how to overcome this situation....
2021 2012-03-08 01:13:22 0000-00-00 00:00:00 -0500 00000000 001 003f 0001 09 sw_cfg_util 3940 3332 C:\sba81\siebsrvr\log\sw_cfg_util.log 8.1.1 SIA [21111] ENU
GenericLog GenericError 1 000000024f580f64:0 2012-03-08 01:13:22 Error in transferring input values ,num of arrays incorrect 0, expected : 1
GenericLog GenericError 1 000000024f580f64:0 2012-03-08 01:13:22 TransferInputsToValues returned error:3611539 to SetControlValues
GenericLog GenericError 1 000000024f58096c:0 2012-03-08 01:13:33 NSS - ErrCode 4597527 SysErr 0
GenericLog GenericError 1 000000034f58096c:0 2012-03-08 01:13:35 NSS - ErrCode 4597527 SysErr 0
GenericLog GenericError 1 000000034f58096c:0 2012-03-08 01:13:35 Validation failed : C028: Unable to connect to the Siebel Gateway Name Server ῤ粃䂬粃呸 ֓呸 ֓㷕粃Ꞡ粈㶻粃
GenericLog GenericError 1 000000034f58096c:0 2012-03-08 01:13:35 ValidateFailed for Gateway Name Server TCP/IP Port, error : C028: Unable to connect to the Siebel Gateway Name Server ῤ粃䂬粃呸 ֓呸 ֓㷕粃Ꞡ粈㶻粃Please check Doc ID 1391312.1 on support.oracle.com, this article has a list of possible causes and resolutions for the error messages you are receiving.
Hope it helps,
Wilson -
An error when registering SQL server driver
Hi
I have got the following error when register SQL server drive
"RemoteMsDataBase.java": Error #: 302 : cannot access class com.microsoft.jdbc.sqlserver.SQLServerDriver; neither class nor source found for com.microsoft.jdbc.sqlserver.SQLServerDriver at line 19, column 63
the code that cause error
// register the SQL driver
DriverManager.registerDriver(new com.microsoft.jdbc.sqlserver.SQLServerDriver());
// connect to the DB by using the driver.
String connString = "my_dbserver:1433;databasename=my_database";
String strDBConnect = "jdbc:microsoft:sqlserver://" + connString;
conn = DriverManager.getConnection(strDBConnect, userName, passwd);
To include jars to my classpath do this:
javac -deprecation -classpath msbase.jar;msutil.jar;mssqlserver.jar *.javajavac -deprecation -classpath msbase.jar;msutil.jar;mssqlserver.jar *.javaSpecify the full path for jar(s), example,
javac -deprecation -classpath .;c:\myjars\msbase.jar;c:\myjars\msutil.jar;c:\myjars\mssqlserver.jar *.java
Hope it works.
Sudha -
Error when adding any menu - FRM-40735: ON-INSERT trigger raised unhandled
When I try to add any new menu in my newly cloned instance I get this error:
Error when adding any menu - FRM-40735: ON-INSERT trigger raised unhandled excpetion. ORA-04031.
Using Oracle EBS version 12.1.3.
Details:
Menu JOB_STRUCTURE_MENU
User Menu Name Job Strucure Menu
Menu Type Standard
Description Menu to add job, grade, and incentives
Seq = 1
Prompt = Enter and Maintain
Function = Combined Person & Assignment Form WF="US SHRMS TSKFLW
When I click save I get the error.
Any assistance would be greatly appreciated.
Thanks!Please post the details of the application release, database version and OS.
When I try to add any new menu in my newly cloned instance I get this error:
Error when adding any menu - FRM-40735: ON-INSERT trigger raised unhandled excpetion. ORA-04031.Is the issue with all menus or specific ones only?
Did AutoConfig complete successfully?
When I click save I get the error.
Any assistance would be greatly appreciated.Do you have any invalid objects in the database?
Any errors in the database log file?
Please obtain FRD log file for details about the error -- https://forums.oracle.com/forums/search.jspa?threadID=&q=FRD+AND+R12&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein -
800w error when synching (exchange server?)
Hello,
Bought an 800w but haven't been able to synch properly since initially setting up the device. I get the following error when synching:
"The server could not be reached. This can be caused by temporary network conditions."
Googled for solutions and came to the conclusion that the phone and/or PC thinks I'm on an exchange server as if I were at work. However, this is my home PC and it is not networked (except for wireless internet).
I'm thinking this is simply a settings error, but I don't know how to fix it. Any ideas?
Much appreciated!
Post relates to: Treo 800w (Sprint)Is the error when you sync "over the air" or when you connect to your PC? What kind of email do you have set up?
Post relates to: Treo 800w (Sprint) -
We have one front end pool, that contains 2 front end servers running Lync Server 2013.
When the first server, LFE01 goes offline (to be restarted for instance), the second front end server LFE02 in the same pool's Lync services will suddenly stop and will refuse to start until LFE01's Lync services have started again.
During this time, the Lync client will go from full functioning mode whilst LFE01 is up and running, to reduced functionality (when LFE01 is restarting), to the user being signed out of Lync and not able to log back in. As soon as LFE01 comes back up, users
can log back in to Lync.
We'd ideally like LFE02 to take over the front end server role whilst LFE01 is restarting, and vice-versa.
Checking the event logs on LFE02, I can see the following errors when LFE01 is offline:
This process was not able to update its health status
The Audio-Video Conferencing Server failed to send health notifications to the MCU factory at https://frontendpool.contoso.com:444/liveserver/mcufactory/.
Failure occurrences: 30, since 7/11/2013 3:40:38 PM.
Cause: Either the Front End service is not running, or poor network connectivity.
Resolution:
Verify that the Front End Service is available, and its machine is visible over the network.
This process was not able to update its health status
The IM Conferencing Server failed to send health notifications to the MCU factory at https://frontendpool.contoso.com:444/liveserver/mcufactory/.
Failure occurrences: 30, since 7/11/2013 3:40:42 PM.
Cause: Either the Front End service is not running, or poor network connectivity.
Resolution:
Verify that the Front End Service is available, and its machine is visible over the network.
Server startup is being delayed because fabric pool manager is initializing.
Cause: This is normal when Pool is bootstrapped and indicates that the Front-End is waiting for a quorum of other Front-Ends to be started.
Resolution:
If this event recurs persistently, ensure that 85% of the Front-Ends configured for this Pool are up and running. For 2 or 3 machine Pools, initial cold-start of the Pool requires all machines to be started. If multiple Front-Ends have been recently
decommissioned, run Reset-CsPoolRegistrarState -ResetType QuorumLossRecovery to enable the Pool to recover from Quorum Loss and make progress.
Does the first server in the pool need to be up at all times for the second server to be running? If so, I may need to re-plan my redundancy.I can't believe how inaccurate these statements are.
Yes as per Microsoft it is best practice to have 3 FE in a pool but that absolutely does not mean that if you have 2 FE server in a pool that your pool will stop working!!
In case when you do have 2 FE servers in a pool your Back End primary database server will act as a vote to keep the quorum for single server still left in a pool and all your clients will keep operating in a pool with one FE still running.
The problem with having 2 FE in a pool as per Microsoft documentation is as follows:
If one of the two Front End Servers goes down, you should try to bring the failed server back up as soon as you can. Similarly, if you need to upgrade one of the two servers, bring it back
online as soon as the upgrade is finished.
If for some reason you need to bring both servers down at the same time, do the following when the downtime for the pool is finished:
The best practice is to restart both Front End Servers at the same time.
If the two servers cannot be restarted at the same time, you should bring them back up in the reverse order of the order they went down.
If you cannot bring them back up in that order, then use the following cmdlet before bringing the pool back up:.
http://technet.microsoft.com/en-us/library/gg412996.aspx
I tested this in my environment which I currently am running with 2 FE servers and I can categorically confirm that pool will continue operating.
However, with all this said I did notice that clients with connection to FE server that is shut down take anywhere from 2-9 min to reconnect. I was trying to figure out why such a long delay until clients reconnect. Possibly it might be because there are
2 FE servers in a pool and Back End server is taking a while to vote in turn delaying auto reconnect process for clients. Second possibility that I'm looking into is that we deployed HLB for sip traffic internally as well and I'm curious if using DNS LB would
fix this delay.
I'm just so disappointed how inaccurate some of these accepted answers above are. -
0x80070569 Error When Creating Second Virtual server in Hyper-v 2012
I get this error when I try to create a second VM from Hyper-v Manager on windows 8 / server 2012 / server 2008 R2.
Hyper-v is running on a new install of server 2012 core.
I was able to create the first VM (server 2012 with a GUI) and is running fine.
I have tried adding the local administrator account to the logon as a batch job and doing a gpupdate /force with not luck.
Both the server 2012 core and the server 2012 VM are joined to the same domain. I am logged into server 2012 and server 2008 R2 as the domain administrator.
Any ideas would help!Hi,
Error Message: The user has not been granted the requested logon type at this computer, this problem typically occurs when the user does not have the permissions to log on locally on the computer.
By default, members of the Users group have the ability to log on locally, but an administrator can deny the right to specific user or group accounts. An explicitly denied right always overrides an allowed right.
This can be caused by either of the following:
Neither the user account nor any of the groups it belongs to has been granted the Allow log on locally user right.
The user account or one or more of the groups it is a member of has been listed in the Deny log on locally user right.
Ensure that the user, or a group the user belongs to has the right to log on locally. Ensure that the user, and all groups that the user belongs to, are not denied the right to log on locally.
Also, have you tied to restart to restart the Hyper-V host server? Restart it and check the result.
You may also try to create VM using PowerShell command:
Sample Scripts for Managing Virtual Machines
http://technet.microsoft.com/en-us/library/bb963748.aspx
For more information please refer to following MS articles:
Error Message: The user has not been granted the requested logon type at this computer
http://technet.microsoft.com/en-us/library/cc732593(v=WS.10).aspx
Windows 8 Hyper-V Virtual Machine Management Service
http://social.technet.microsoft.com/Forums/lv/winserverhyperv/thread/4b3e7582-dc20-4dcb-8e71-fef9fecce19c
Lawrence
TechNet Community Support
Maybe you are looking for
-
Deploy a web page in webserver
How can I deploy my web page in web server without the need of going for a build of war file
-
Condition Types EDI1 EDI2 For Purcahse Order
Hi All, The vendor sends a price change(855) that can be accepted automatically. The IDoc is updated but the purchase order is not updated with the confirmed price. I found the below from SAP Market Place Answer: Prerequisites for the use of the pric
-
Problem with the follwing transactions in IMG Screen in ECC 5.0 version.
check with the below paths and answer the questions. img- mm purchasing--define default values for buyers --- define tax jusristiction . But in my IDES system, the tax jusrisdiction code for the plant is in display mode. i canno
-
What are the drawbacks of upgrading jailbroken iPhone 3GS to iO6?
My iphone 3gs is jailbroken and is been bought from US to india? So i really have no idea if the phone is factory unlocked. So what if i upgade to io6? what are the problems should be expecting? and also is iot worth upgrading to it?
-
Why do we need info source in bi 7.0?
hi friends, in bi 7.0 we have data source and make transformations. here why they gave again info source? Thanking u suneel.