Error when calling the report on server?

We have a .NET application on the server and we want to call a crystal report (.rpt) from one of the forms (.NET aspx page). We are getting below error. The report works fine on the desktop where it is developed. Please let us know if there is any specific process to move the reports to server. Any help is appreciated.
The report is developed in Crystal Reports 2008 and we are using Visual Studio 2005. We are using Crystal Report Viewer control to call / associate the report developed.
Error message,
An error has occurred while attempting to load the Crystal Reports runtime. Either the Crystal Reports registry key permissions are insufficient, or the Crystal Reports runtime is not installed correctly. Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) containing the correct version of the Crystal Reports runtime (x86, x64, or Itanium) required. Please go to http://www.businessobjects.com/support for more information.
Thanks
Sridhar

Hi,
Have you install the runtime files of CR 2008 on server, if not then install it from [here|http://resources.businessobjects.com/support/additional_downloads/runtime.asp#08].
Download according to the service pack applied on CR 2008.
Also ensure that you are at service pack 1 level of CR 2008 as its a latest service pack available for CR 2008.
Hope this will help!!
Regards,
Amit

Similar Messages

Error when calling a report from Server?

We have a .NET application on the server and we want to call a crystal report (.rpt) from one of the forms (.NET aspx page). We are getting below error. The report works fine on the desktop where it is developed. Please let us know if there is any specific process to move the reports to server. Any help is appreciated.
The report is developed in Crystal Reports 2008 and we are using Visual Studio 2005. We are using Crystal Report Viewer control to call / associate the report developed.
Error message,
An error has occurred while attempting to load the Crystal Reports runtime. Either the Crystal Reports registry key permissions are insufficient, or the Crystal Reports runtime is not installed correctly. Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) containing the correct version of the Crystal Reports runtime (x86, x64, or Itanium) required. Please go to http://www.businessobjects.com/support for more information.
Thanks
Sridhar
Edited by: Sridhar Thodupunoori on Dec 4, 2008 4:13 PM

Hi,
It seems that you are having issue with Crystal reports .Net SDK's.
Post your question in Crystal Reports .NET SDK forum.
That forum is monitored by qualified technicians and you will get a faster response there. Also, all .NET SDK queries remain in one place and thus can be easily searched in one place.
Thank you for your understanding,
Amit

Error when generating the report in Production Server

Hi,
I have created one infoset query in Development server of my client. It is working fine there. I had transported the request containg this query to Production server. But whenever I am trying to generate report using this query in Production server it is giving an error message
"Error when generating the report".
I am not getting what 's problem.
Samriddhi

Samriddhi,
Genarally its not suggested to transport Queries. Should be able to create Queries directly Production. There might be diferences between your Development and Production versions.
Thanks.

Error when generating the report (see long text), Message no. AQ_AD_HOC221

Hi All,
I am facing a peculiar problem while executing an infoset query.I have created 2 customized fields Compa-ratio and PIR in infotype 0008 in an infoset.I have coded in these additional fields.
When I execute a query using 1 of these customized fields the report is generated correctly.But when I put both the fields in the output the report shows an error "Error when generating the report (see long text)". The message# associated with this errAQ_AD_HOC221.
I have also checked the data types and the references. Nothing seems to be wrong here.
Does anybody has any clue about this ?
Kajal

Hi Bernd,
I had a look at those notes. But the information provided did'nt prove to be helpful. I found out the problem. I was using the same local variable for both the fields in their code. This generated the error. This error is a very generic one and does'nt help in finding out what exactly is the problem.
I changed the other local variable and it started working. When I was using the same variable that time I did'nt forget to clear the values but the query still generated the error.
Anyways thanks a lot for the reply.
Kajal

JVM Initialization Error when Starting the Second Managed Server

Hi,
I am getting the below error when starting the 2nd Managed server on Solaris X86 machine.
starting weblogic with Java version:
java version "1.5.0_17"
Java(TM) Platform, Standard Edition for Business (build 1.5.0_17-b04)
Java HotSpot(TM) Client VM (build 1.5.0_17-b04, mixed mode, sharing)
Starting WLS with line:
/usr/jdk/instances/jdk1.5.0/bin/java -client -Xms256m -Xmx512m -XX:CompileThre shold=8000 -XX:PermSize=48m -XX:MaxPermSize=128m -Xverify:none -da -Dplatform .home=/beafiler/weblogic10g/bea/wlserver_10.0 -Dwls.home=/beafiler/weblogic10g/b ea/wlserver_10.0/server -Dweblogic.home=/beafiler/weblogic10g/bea/wlserver_10.0/ server -Dwli.home= -Dweblogic.management.discover=false -Dweblogic.management.s erver=http://test_admin:7001 -Dwlw.iterativeDev=false -Dwlw.testConsole=false - Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=/beafiler/weblogic10g/bea/patch_wss 110/profiles/default/sysext_manifest_classpath:/beafiler/weblogic10g/bea/patch_w lw1021/profiles/default/sysext_manifest_classpath:/beafiler/weblogic10g/bea/patc h_wls1002/profiles/default/sysext_manifest_classpath:/beafiler/weblogic10g/bea/p atch_cie640/profiles/default/sysext_manifest_classpath -Dweblogic.security.provi ders.authentication.LDAPDelegatePoolSize=50 -Dweblogic.Name=wls_test2 -Djava.sec urity.policy=/beafiler/weblogic10g/bea/wlserver_10.0/server/lib/weblogic.policy weblogic.Server
Error occurred during initialization of VM
Could not reserve enough space for object heap
Can any one please help me troubleshoot this?
Edited by: user4877326 on Jul 13, 2010 1:33 PM

Hi P.k,
The table QRTZ92_TRIGGERS is there in the database.But while trying to run this command (UPDATE QRTZ92_TRIGGERS set NEXT_FIRE_TIME=1 where NEXT_FIRE_TIME < 0)in database i am getting the table or view does not exist.
What is GTC resource?
OIM version - 11.1.1.5.0.
-Deena.

Error when selecting the Report Center tab of the Issues web DB

I started a DB from the Issues web DB template. Everything worked fine when I shutdown last night, but this morning I started receiving the following error when selecting the Report Center tab.
You must specify an object for the BrowseTo to open. I have noticed that the ReportCenterDefault form no longer displays. How do I correct this?

Hi Ben
Wyer,
Have you resolved
your problem yet, and does the suggestion help you? If you still have any concern on the thread, feel free to follow up.
Best Regards,
Bruce Song [MSFT]
MSDN Community Support | Feedback to us
Get or Request Code Sample from Microsoft
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Server error when calling the DatabaseController.replaceConnection() method

I am receiving the error message below when calling the DatabaseController.replaceConnection() method. Can anyone tell me what may be the cause of this? The code being executed is below the error message.


Thank you.

<pre>
A server error occured while processing the CrystalReport object, wfr.rpt (AVTJyRKrfDxKtXX31l5E9Ek), from the CMS.
 Unable to connect to the server: ATHENA.ReportApplicationServer.
 --- java.lang.Boolean cannot be cast to java.lang.String
Stack Trace:
com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException: Unable to connect to the server:
 ATHENA.ReportApplicationServer. - java.lang.Boolean cannot be cast to java.lang.String--
 Error code:-2147217387 Error code name:connectServer
 at com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException.
 throwReportSDKServerException(Unknown Source)
 at com.crystaldecisions.sdk.occa.managedreports.ras.internal.CECORBACommunicationAdapter.
 request(Unknown Source)
 at com.crystaldecisions.proxy.remoteagent.y.a(Unknown Source)
 at com.crystaldecisions.proxy.remoteagent.r.a(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.cf.a(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.DatabaseController.replaceConnection(Unknown Source)
 at aiConfigUtility.cmdlline.ImportExportBiarFile.changeReportDataSource(ImportExportBiarFile.java:561)
 at aiConfigUtility.cmdlline.ImportExportBiarFile.processBiarFile(ImportExportBiarFile.java:726)
</pre>
 
<pre>
private void test(String reportName)
 throws SDKException, ReportSDKException, java.io.IOException
 IInfoObjects newInfoObjects;
 IInfoObject reportObj;
 ReportClientDocument clientDoc = new ReportClientDocument();
 DatabaseController dc;
 PropertyBag pBag;
 PropertyBag logonProps;
 ConnectionInfo newConInfo;
 ConnectionInfo oldConInfo;
 ConnectionInfos conInfos;
 int connOptions = DBOptions._ignoreCurrentTableQualifiers + DBOptions._doNotVerifyDB; //0;
 Fields connFields = null;
 String queryStr = "Select * From CI_INFOOBJECTS " +
 "Where SI_NAME='wfr.rpt' AND SI_KIND='CrystalReport' AND SI_INSTANCE=0";
 newInfoObjects = getCms().executeQuery(queryStr);
 if(newInfoObjects.size() > 0)
 reportObj = (IInfoObject)newInfoObjects.get(0);
 try
 clientDoc = getCms().getReportAppFactory().openDocument(
 reportObj
 , OpenReportOptions._refreshRepositoryObjects
 , java.util.Locale.US);
 dc = clientDoc.getDatabaseController();
 conInfos = dc.getConnectionInfos(null);
 for(int i = 0; i < conInfos.size(); ++i)
 oldConInfo = (ConnectionInfo)conInfos.getConnectionInfo(i);
 newConInfo = (ConnectionInfo)oldConInfo.clone(true);
 pBag = newConInfo.getAttributes();
 pBag.putStringValue("QE_ServerDescription", "alio");
 logonProps = new PropertyBag();
 logonProps.putStringValue("Trusted_Connection", "false");
 logonProps.putStringValue("Server", "alio");
 pBag.put("QE_LogonProperties", logonProps);
 newConInfo.setUserName("admin");
 newConInfo.setPassword("password");
 dc.replaceConnection(
 oldConInfo
 , newConInfo
 , connFields
 , connOptions);
 catch(ReportSDKServerException Ex)
 String msg = "A server error occured while processing the " + reportObj.getKind()
 + " object, " + reportObj.getTitle() + " (" + reportObj.getCUID() + "), from the CMS.";
 Utility.errorOut(msg, Ex);
 catch(Exception Ex)
 String msg = "An error occured while processing the " + reportObj.getKind()
 + " object, " + reportObj.getTitle() + " (" + reportObj.getCUID() + "), from the CMS.";
 Utility.errorOut(msg, Ex);
 finally
 clientDoc.save();
 getCms().commitToInfoStore(newInfoObjects);
 clientDoc.close();
</pre>
Edited by: Mark Young on Sep 10, 2009 2:13 PM

I just wanted to provide an update to this. I did find a work-around for this, but I cannot explain it. The post I added to a related thread on 23 Sept. 2009, Trying to change the data source for a Crystal Report. (thread 1472257), explains a work-around I found for that problem. It seemed to resolve this one simultaneously.


I don't know why it works. If anyone has a comment or some insight, it is welcome. Thank you in advance.

FRM-41214 Error when calling a report

Hello,
when I try to call a report from forms I've this error:
FRM-41214 - can't run report
The reports server is running local and I'm using Forms 10.
Can anybody help me?
Thanks,
RaÃºl
This is the code I'm using:
PRINT_REPORT('Boletas', '\\sbd\Fuentes\Reports\Boletas.jsp', 'FECHA_DESDE=' || FECHA_DESDE || ' FECHA_HASTA=' || FECHA_HASTA);
END;
PROCEDURE PRINT_REPORT(p_RptObj VARCHAR2, p_NombreRpt VARCHAR2, p_Param VARCHAR2) IS
report_id Report_Object;
v_report_other VARCHAR2(4000);
BEGIN
/* Call run_report_object */
report_id:= find_report_object(p_RptObj);
v_report_other:= 'paramform=yes '||p_Param;
RUN_REPORT_OBJECT_PROC(report_id,
'Repsrv',
'HTMLCSS',
CACHE,
p_NombreRpt,
v_report_other,
'http://192.168.0.231:8889/reports/rwservlet');
END;
--this proc. was copied from white papers:
PROCEDURE RUN_REPORT_OBJECT_PROC (report_id REPORT_OBJECT,
report_server_name varchar2,
report_format varchar2,
report_destype_name number,
report_file_name varchar2,
report_otherparam varchar2,
reports_servlet varchar2
) IS
report_message VARCHAR2(100) :='';
rep_status VARCHAR2(100) :='';
vjob_id VARCHAR2(4000) :='';
hidden_action VARCHAR2(2000) :='';
v_report_other VARCHAR2(4000) :='';
i number (5);
c char;
c_old char;
c_new char;
sso_user VARCHAR2(100);
BEGIN
-- setting Reports runtime parameters
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_FILENAME,report_file_name);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_SERVER,report_server_name);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESTYPE,report_destype_name);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESFORMAT,report_format);
-- creating string for pfaction parameter
hidden_action := hidden_action ||'&report='
||GET_REPORT_OBJECT_PROPERTY(report_id,REPORT_FILENAME);
hidden_action := hidden_action ||'&destype='
||GET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESTYPE);
hidden_action := hidden_action ||'&desformat='
||GET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESFORMAT);
-- determine whether single sign-on is used or not. In the case
-- of single sign-on add the ssoconn parameter to the otherparam section.
-- If run in normal mode, just use userid
sso_user := get_application_property(sso_userid);
IF (length(sso_user) > 0) THEN
-- sso is used
hidden_action := hidden_action||'&ssoconn='; --||:parameter.config;
ELSE
-- no sso
hidden_action := hidden_action ||'&userid='
||get_application_property(username)||'/'
||get_application_property(password)||'@'
||get_application_property(connect_string);
END IF;
-- report other parameters are passed as key value pairs
-- "key1=value1 key2=value2 ..."
-- the following loop replaces the delimiting blank with an '&'
-- used on the Web.
-- c_old is initialized with a dummy value
c_old :='@';
FOR i IN 1..LENGTH(report_otherparam) LOOP
c_new:= substr(report_otherparam,i,1);
IF (c_new =' ') THEN
c:='&';
ELSE
c:= c_new;
END IF;
-- eliminate multiple blanks
IF (c_old =' ' and c_new = ' ') THEN
null;
ELSE
v_report_other := v_report_other||c;
END IF;
-- save current value as old value
c_old := c_new;
END LOOP;
hidden_action := hidden_action ||'&'||v_report_other;
-- report_servlet contains the full path to the Reports Servlet
-- Example1, Forms and Reports are on the same host
-- reports_servlet:='/reports/rwservlet';
-- Example2, Forms and Reports are on separate hosts
-- reports_servlet:='http://host:port/reports/rwservlet'
hidden_action := reports_servlet||
'?_hidden_server='||report_server_name||encode(hidden_action);
-- Set pfaction to the report
message(hidden_action);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_OTHER,'pfaction='
||hidden_action||' '||report_otherparam);
report_message:= run_report_object(report_id);
rep_status := report_object_status(report_message);
IF rep_status='FINISHED' THEN
vjob_id := substr(report_message,
length(report_server_name)+2,length(report_message));
WEB.SHOW_DOCUMENT(reports_servlet||'/getjobid'||vjob_id
||'?server='||report_server_name,' _blank');
ELSE
--handle errors
message ('Error');
END IF;
END;

Thanks Frank, I opened the Queue Manager but the queue remains empty.
If I try to call the report from Internet Explorer, i.e. typing in the URL:
http://192.168.0.231:8889/reports/rwservlet?server=Repsrv&report=reportname.rdf&desformat=HTMLCSS&destype=CACHE&userid=username%2Fpwd%40connectionstring&paramform=yes&
I've a blank form from Oracle Reports saying:
REP-110: Can't open file 'reportname.rdf'.
REP-1070: Error when opening or saving document.
REP-0110: Can't open file 'reportname.rdf'.
I've already tried using the full path where report is with the same response.

Getting the error while calling the report from oaf page

Dear all
when i am calling the report from oaf page
if (pageContext.getParameter("PrintPDF") != null)
DataObject sessionDictionary =
(DataObject)pageContext.getNamedDataObject("_SessionParameters");
HttpServletResponse response =
(HttpServletResponse)sessionDictionary.selectValue("HttpServletResponse");
try
ServletOutputStream os = response.getOutputStream();
// Set the Output Report File Name and Content Type
String contentDisposition = "attachment;filename=EmpReport.pdf";
response.setHeader("Content-Disposition", contentDisposition);
response.setContentType("application/pdf");
// Get the Data XML File as the XMLNode
XMLNode xmlNode = (XMLNode)am.invokeMethod("getEmpDataXML");
ByteArrayOutputStream outputStream = new ByteArrayOutputStream();
xmlNode.print(outputStream);
ByteArrayInputStream inputStream =
new ByteArrayInputStream(outputStream.toByteArray());
ByteArrayOutputStream pdfFile = new ByteArrayOutputStream();
//Generate the PDF Report.
TemplateHelper.processTemplate(((OADBTransactionImpl)pageContext.getApplicationModule(webBean).getOADBTransaction()).getAppsContext(),
"XXCRM", "XXCRM_EMP",
((OADBTransactionImpl)pageContext.getApplicationModule(webBean).getOADBTransaction()).getUserLocale().getLanguage(),
((OADBTransactionImpl)pageContext.getApplicationModule(webBean).getOADBTransaction()).getUserLocale().getCountry(),
inputStream,
TemplateHelper.OUTPUT_TYPE_PDF, null,
pdfFile);
// Write the PDF Report to the HttpServletResponse object and flush.
byte[] b = pdfFile.toByteArray();
response.setContentLength(b.length);
os.write(b, 0, b.length);
os.flush();
os.close();
} catch (Exception e)
response.setContentType("text/html");
throw new OAException(e.getMessage(), OAException.ERROR);
pageContext.setDocumentRendered(false);
i am getting the error java.classcastexception at this line
DataObject sessionDictionary =
(DataObject)pageContext.getNamedDataObject("_SessionParameters");
regards
Sreekanth

check if you have import oracle.cabo.ui.data.DataObject; in your import statement.
--Prasanna

Custom tool error for COMexception: The report application server failed.

hi there,
i am using crystal reports for the last one year onwards, i don't get any errors till know. Yesterday when i modified some information in 40 reports. out of these reports 34 reports are successfully build, but for the remaining six reports the code is not generating.
Custom tool error: "Code generator 'ReportCodeGenerator' failed. Exception stack = CrystalDecisions.Shared.CrystalReportsException: Load report failed. ---> System.Runtime.InteropServices.COMException: The Report Application Server failed
   at CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options)
   at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options)
   at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
   --- End of inner exception stack trace ---
   at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename)
   at CrystalDecisions.VSDesigner.CodeGen.ReportClassWriter..ctor(String filePath)
   at CrystalDecisions.VSDesigner.CodeGen.ReportClassWriter..ctor(String filePath, String resourceNamespace)
   at CrystalDecisions.VSDesigner.CodeGen.ReportCodeGenerator.GenerateCode(String inputFileName, String inputFileContent)"
i am not understanding why it is getting for me, Please help me

Hello,
Whoever wrote the CustomCodeGenerator will have to help you with this one. We know nothing about the underlying code they are using and therefore can't determine the cause.
Appears the error is it can't even load the report so there is something wrong with the workings. Open the report again in CR Designer and Verify Database and then check the changes you did. Something is not right or the DB driver their application is using does not match with what you are using.
Don

Invalid Year error when refreshing the report with date prompt

Hi All,
I am working on BO XI 3.1 with Informix database.
When refreshing the report without any date prompt the report is running fine,but when applying the date prompt it is giving the error message
"Invalid year in the date".
I have tried changing the value in the advance tab of the object property to 'yyyy-mm-dd hh:mm:ss'
But it also din't work for me.
Please suggest.
Thanks and Regards,
Rishabh

Hi Experts,
Thanks for your suggestions.
Since changing the PRM file was not a fesiable solution for us.
We have manged to find a work around to solve this issue
We have created the filters at universe level with following formula for all the date objects which we ere using at report level as a prompt:
@Select(classname\objectname)=TO_DATE(@Prompt('Enter Date:','D',,mono,free,not_persistent), '%Y/%m/%d')
Although when we parse this formula it wil give an error message saying 'illigle operation',
still it will work when we use this at report level.
Thanks and Regards,
Rishabh

Bug Report - DB toolkit returns error when calling the DefaultDatabase property with SQLite

There's an old bug in the DB toolkit where calling the DefaultDatabase property returns error -2147217887 if you're using certain DBs (such as SQLite or PostgreSQL and I believe MySQL as well).
The problem is that this property is called by a VI which is used in some of the commonly used VIs (such as the insert VI),
causing them to fail. Whoever wrote the code was aware of this issue,
since they added a comment about it, as you can see below.
The immediate fix for this is pretty easy - add code to ignore the error or don't call the property at all. It's not used anywhere in the toolkit and unless you're using the VI yourself to get the property, this won't break any code. The problem with this is that you need to do this in every PC.
NI already has a CAR for this (CAR 232063) and should hopefully fix it, so there's no need to take further action at the moment. This post is for people searching for this in the future.
Try to take over the world!

Interesting. I have seen this before but it returned a different error code. (Error -2147352567)
=====================
LabVIEW 2012

Error when running the report

hello,
i am running a report, which has three parameters begin date, end date and dept full name.
for example when i am running the report with following parameter's works fine they are 01/01/2002, 02/02/2002 and dept name is Animal Control.
but when i am running the report with the following parameters its giving problem i.e.
01/01/2002, 02/02/2002 and dept name is Mayor's office its not running the report says command line syntax error rep-0159.
in the database the dept name is Like Mayor's office.
i dont know how to convert the apostrophe to a string or what ever, to get the report.
this is production problem.
please do help me out.
thanks.

Hello!
I guess you are running your report using rwrun60.exe, probably in batch mode.
In such cases string parameter with single quote inside of it should be passed in a such way: rwrun60 ... paramname3='Mayor''s office' ...
In Reports 6.0.8.11.3 it works fine.
No problems at all if you are calling report from the Forms using run_product built-in and passing prameter list into the report.
Regards,
Andrew Velichko
Brainbench MVP for Oracle Developer 2000
http://www.brainbench.com

Crystal reports and SAP BI--------BAPI error when executing the report

Hi All,
I am getting a problem accessing the data from the SAP BI system into the crystal reports.I created a report in CR2008 on a query built in SAP BI.When I execute this query,I am getting the following error.
Database Connection Error:'BAPI Error #:0
Error Occured when starting the parser:timeout during allocate / CPIC-CALL:'ThSAPCMRCV"
CAN ANYBODY HELP ME OUT Please.
Thanks,
Kumar
Edited by: Madan Koka on Dec 15, 2008 5:47 PM

Hi,
I have the same problem. I can create report in Crystal Reports on a query but can`t get data from BW.
Thx in advance for help
Jacek

Compiled and trying to deploy a form - an error when calling the form

Hi!
I used to deal with Forms 6i and I'm quite new to 10g.
Is it enough to just replace an .fmx file on the server?
We have a software product written on Forms 10g which is running on our server.
I found where working .fmx files are located on the server.
I also found which seems to be the source files.
My actions:
1) Selected one of the forms and compiled it in Bulder 10g successfully.
2) Replaced an .fmx file with one which I had comiled.
3) In user interface, press the button which calls my form, but nothing happens. The form is not created. No error messages.
4) Put the original .fmx back - and everyting works: after pressing the button the form starts.
What's wrong? Improper way of compilation or deployment?
Any suggestion would be appreciated.
Thanking in advance,
Roman

Roman Churakov wrote:
Thank you, Christian!
You are right!
According to my last test, when I try to call the form directly from the url (via parameter form=myform.fmx), I get the following:
1) With the orginal myform.fmx, the form starts
2) With the form compiled by me, I get error: "Cannot read form myform.fmx"
Though the file names are identical, the file compiled on windows doesn't go.
P. S.
Nevertheless, that's weird for me: I supposed that since Forms 10g is based on Java, the compilation must be platform-independent.
Edited by: Roman Churakov on 20.01.2012 1:58I think you have just a problem with upper/lowercase.
.) ensure your fmx is exactly myform.fmx
I am not sure but I think you get this message also if there is a wrong attached-library-name in the source.
So if its still not working convert the fmb to text (file->convert...), check if the libraries are attached correctly (case sensitive on UX/LX) the libs are visible in the first lines, check if some libs are attached multiple times, correct that stuff, and convert back from text to fmb.
Hope that helps!

Error when calling the report on server?

Similar Messages

Maybe you are looking for