Error when creating purchasing group.
Hi,
i am facing two issue when creating purchasing group. i never had such a situation before.
i have created two p.groups successfully and moved to quality.later i figured one of them is missing USER ID now when i try to enter user ID in user column getting below mention error.
Entry XXXX Does not exist in USR02-check your entry.message no 00058.i have checked in USR02 None of ID's exist i used in newly created groups.but ID i used in other groups has no issue even doesn't exist in USR02,but it shows value US in OB(Object type filed).
both ID's are not being created in Development in other words SAP ID's with SU01 but we never had such issue before while changing or creating now purchasing group.
Another thing i have noticed that OB(Object type field is missing in Dev.) i can see that field in Quality even in sand box but not visible in Dev.that when i use OME4.but when i use SM30-V_024 i can see the OB field.Somehow OB field is hidden when going through SPRO or ME04.
This is about Sap ver.4.7
Suggestion are much appreciated.
Hi,
Before creating new purchasing groups- 1st check your user ID is authorized to purchasing groups create in t.code: OME4.
In development system you can creates new purchasing groups with USER ID and telephone numbers, upon saving system will create a transport request. Later you can transfer related transport request to quality system for your testing.
For example: You can creates new purchasing groups with USER ID and telephone numbers
Purchasing groups-------------USER ID ---------------Telephone numbers
Z01-----------------------------------USR01------------------232569875
Z02-----------------------------------USR02------------------232589876
Regards,
Biju K
Similar Messages
-
Error when create purchase order
Hi all,
I have a strange error when create po. it is display : Please enter item number greater than 0.that only a vendor and a material.I check the vendor and the material is same as other vendor and materials.if i first input the vendor and input the material then display message : Please enter item number greater than 0,but i can't input the item number. if i first input material and enter,then input vendor the system is ok. I check configer is ok. and other vendor , material also ok.
thanks to reply.
jamesHi,
Go to SPRO-Materials Management-Purchasing-Purchase Order-Define Document Types..
Select your doc type which you are selcting at the time of PO creation..
Say for e.g. NB.
Now you have to maintain " Item Number Interval" as 10 in front of your doc type.
This option is just after "Document Type Description".
Now save and check.
Cheers...
Utsav.. -
Error when creating master group
I am trying to set up a replication environment with only one master site. I do
it by running SQL script using SQLPlus (rather than using the Wizard). The
following is the script I used to create the master site:
create user REPADMIN identified by REPADMIN;
BEGIN
DBMS_REPCAT_ADMIN.GRANT_ADMIN_ANY_REPGROUP(
userid => 'REPADMIN');
END;
grant comment any table to REPADMIN;
grant lock any table to REPADMIN;
grant execute any procedure to REPADMIN;
All lines completed successfully. Then I connect as "repadmin" and try to
create a master group. The following is the screen capture when I ran the
SQLPlus:
Connected to:
Oracle7 Server Release 7.3.4.4.1 - Production
With the distributed, replication and parallel query options
PL/SQL Release 2.3.4.4.1 - Production
SQL> BEGIN
DBMS_REPCAT.CREATE_MASTER_REPGROUP(
gname => 'REPGRP01',
qualifier => '',
group_comment => '');
END;
2 3 4 5 6 7 BEGIN
ERROR at line 1:
ORA-01403: no data found
ORA-06512: at "SYS.DBMS_REPCAT_UTL", line 2121
ORA-06512: at "SYS.DBMS_REPCAT_MAS", line 420
ORA-06512: at "SYS.DBMS_REPCAT", line 45
ORA-06512: at line 2
I have no idea on the error message and even don't how to trace the error.
Is there anything I missed when creating the replication administrator
'repadmin'? Or anything I have to set up as well before I can create a master
group?
p.s.
1) The version of the Database is 7.3.4.4.1
2) I did try to create a master group using the Wizard in DBA studio, but
same error messages appeared.
Thanks in advance.
KaeHi,
Before creating new purchasing groups- 1st check your user ID is authorized to purchasing groups create in t.code: OME4.
In development system you can creates new purchasing groups with USER ID and telephone numbers, upon saving system will create a transport request. Later you can transfer related transport request to quality system for your testing.
For example: You can creates new purchasing groups with USER ID and telephone numbers
Purchasing groups-------------USER ID ---------------Telephone numbers
Z01-----------------------------------USR01------------------232569875
Z02-----------------------------------USR02------------------232589876
Regards,
Biju K -
Occurs error when create purchase req. from product order with 'PP02'
hi,friends.
when i add a route with 'co02', and select control key 'pp02',
then it leave to the view of 'Ext. Processing',
i input the values of 'Cost Element' 、'Purchasing Group' 、'Material Group'....
and the value of 'Res./Purc. req.' is '3',
but when i return,it shows the error:
Error occurred during creation of purchase requisition for operation 0050
Message no. C2325
Diagnosis
During automatic creation of the purchase requisition to operation 0050, an error (ME 673) occurred.
System Response
The system cannot create the corresponding purchase requisition.
Procedure
For further proceedings, read the long text of error message (ME 673) in transaction SE91. Check the operation affected and change or complete any missing data that led to the error message.
double click the route,goto the view of 'Ext. Processing',
and the value of 'Res./Purc. req.' changed to '2',
why?
and the purchase request isn't be created.thanks for K.Madhu Kumar
the value of Res./Purc. req. be changed to '2'
so the purchase requisition con't be created.
if i Release the production order,it will be created,
and the item cat. is null, the acct assgt cat. is 'F'
Edited by: tizo lee on Jul 20, 2010 5:11 AM -
Error when creating product group
Hai frnds,
While creating a product group the following error occurs
REQUIRED PARAMETERS MISSING WHEN CALLING UP MODULE
help me in the issue
regards
Karthik.bHi,
Please refer this thread,
https://www.sdn.sap.com/irj/sdn/profile?userid=3781605
Regards,
R.Brahmankar -
Error when creating purchase order
Hello all,
when we create a purchase order in SAP and hit the SAVE button to create it, an error screen comes up and says:
Syntax error in program "SAPLECP_PDF"
What happened?
The following syntax error occurred in the program SAPLECP_PDF:
"The TYPE-POOL "ALVT" is unknown"
Error in ABAP applicatio program.
The current ABAP program "SAPLXM06" had to be terminated because one of the statements could not be excuted.
What can I do to fix that?
Thanks
AnneSAPLECP_PDF is pretty small (open it in SE38)
3 statements are includes for user-defined files....
Of course it interacts with the form and customizing settings and may retrieve faulty entries from there that cause finally a syntax error. But I have not seen any SAP program that got shipped with a syntax error.
sorry had overlooked this hint TYPE-POOL "ALVT" .
Now i guess that the transport from your developement system to system you get teh error was not complete.
Edited by: Jürgen L. on Feb 15, 2008 8:05 PM -
Runtime Error when creating a new group
I'm getting a runtime error when creating a new group on a site collection?
Thanks in advanceThe most possible reason is if your site collection is reached the maximum site quota limit,then there is chance to get the run time error while creating a new group.
In this case,you will get the error while creating/updating the group or while adding the new user/uploading any content.
Also Ensure the group name is not having any special/unsupported characters.
Feel free to share the error screenshot/entry in the ULS logs.
Please remember to click 'Mark as Answer' on the answer if it helps you
Best Regards,
Pavan Kumar Sapara
s p kumar -
Error while creating product group
hi,
i am getting error while creating Product group.
Required parameters missing when calling up module
Message no. M3749
Please suggest me.. how to cop this
Regards,
amitDear Brahmankar,
I am using product groups in SOP as well as in the normal plannning scenario.In the normal planning scenario I am giving my PIR's in MD61 for the entire group.Then I am running MRP in MD02 for my product group.System is generating all the requirements normally for the entire group .
Please suggest me , this process is correct or it will create any problem in any module .
Thanks & Regards
Prabhakar -
Error while creating purchasing documents
Hi,
Iam a new user to Material Management unable to create any Purchasing docments (PR,RFQ,P.o..etc).
As Iam trying to procure a material for stock, selected the Accountassignment as Unknown.
got following two errors
1.Unknown account assignment not defined for use here
2.Source not included in list despite sorce list requirement
pls suggest me something to avoid these errors and create P.Os.
ThanksHi,
I got some clue ,
1. As I have specified it is a stock material, It should not ask for any account assignment.
It is asking because I have not updated the material quantity,value updations in IMG settings for the material type
2.The issue was I have checked the source list for plant in the sorce list configuration settings (SPRO> Materials management>Purchasing>Sourcelist>Define source list requirement at plant level)
And I have not maintained the source list.
If you check the above setting, you need to maintain source list for the material
As you specified I have checked the configuration for combination item category-account assignment for item category that was used when creating purchasing document.
for standard itemcategory,unknown account assignment type has been defined.
Now I could able to create P.Os for stock material by updating qty,value updation in material type, and if I don't update this, and use account assingment as unknown I'm getting the saemerror as "unknown account assignment not defind for use here"
pls let me know how to avoid this error, hep me what are the required settings for making a P.O for accountassignment categories
Thanks -
Error when creating link to documents from material
Hi all,
while creating the purchase order the error message "Error when creating link to documents from material 61260224060" is displayed.
why this error message is displayed.?
Regards,
GaneshRajaHello Ganesh
Please check material master - view 'Bases data 2'.
There is checkbox 'No link'. You can activate this checkbox if you are not storing any drawing/designe docuemnt for this material.
Try to do this and check out again.....
If this helps you in resolving your issue, i would appreciate if you reward the answer with suitable points.
Best Regards
Avinash -
Error when creating files for transport request SAPK-700BGINPLMWUI
Hello experts,
We're upgrading our 46c System to ERP 6.0 EHP4.
In Phase EHP_INCLUSION we get the following error Message: Disassembling package queue failed, rc = "2", reason = "Error when creating files for transport request SAPK-700BGINPLMWUI"
We've already checked the SAINT version; Upgrade Fix, SAPCAR version. We've checked our TMS as well and everything seems O.K.
Any help would be really appreciated!!!
Complete Error message:
EhP component PLMWUI, 700
Looking for SAINT package for 'PLMWUI' ...
R3upReadNewPackages:
patchType='U', langVect='DEC'
RFC Login to: System="X05", Nr="00", GwHost="sxt ", GwService="sapgw00"
RFC Login succeeded
Calling function module "spda_read_new_packages" by RFC
ismovesVersion='0'
R3upReadNewPackages: exit: rc=0
... No matching package found.
R3upReadNewPackages:
patchType='I', langVect='DEC'
RFC Login to: System="X05", Nr="00", GwHost="sxt ", GwService="sapgw00"
RFC Login succeeded
Calling function module "spda_read_new_packages" by RFC
ismovesVersion='0'
R3upReadNewPackages: exit: rc=0
Found: name = 'PLMWUI', release = '700', package = 'SAPK-700BGINPLMWUI', type = 'AOI'
... Matching package found: 'PLMWUI','700','SAPK-700BGINPLMWUI'
(trc) R3upPatchDisassembleQueue: 1 package queue entries
(trc) R3upPatchDisassembleQueue: force=YES
(trc) R3upPatchDisassembleQueue: 1 packages will be disassembled
Starting disassembling package queue
Date & Time: 20100319133139
Starting RFC Login to: System = "X05", GwHost = "sxt ", GwService = "sapgw00"
RFC Login to: System="X05", Nr="00", GwHost="sxt ", GwService="sapgw00"
RFC Login succeeded
Calling function module "SPDA_DISASSEMBLE_QUEUE" by RFC
Input table IT_PATQ:
"SAPK-700BGINPLMWUI","000","AOI","PLMWUI","700","SAP PLM Web UI","00"
Call of function module "SPDA_DISASSEMBLE_QUEUE" by RFC succeeded
Logging off from SAP system
Date & Time: 20100319133139
Disassembling package queue failed, rc = "2", reason = "Error when creating files for transport request SAPK-700BGINPLMWUI"Hello Anthes,
Please Check the things in following sequence :
1.Use latest SAPehpi, R3trans and tp versions.
2. users/group authorization issue and/or ownersip limitations (set 777) .Reboot the server to make sure, that the authorisations are updated and there is no lock on a file in the EHPI dir.Repeat the phase.
Folders where permissions should be 777 are Upgrade directory, Data Directory, Cofile directory and .../EPS/in.
3. Source file corruption can be ruled out by execution
R3trans -l /usr/sap/<SID>/..../abap/data/R-700BGINPLMWUI.SAP (The data file corresponding to the Package which is giving error). Check if this ends fine.
Note 2050
4. Confirm that your transport tool is 'healthy' by testing it in STMS. In SPAM in client 000 use the function Disassemble package and enter the package <Package name>.
5. Try to update the kernel if it not helps.
Best Regards
Niraj -
Error when creating index with parallel option on very large table
I am getting a
"7:15:52 AM ORA-00600: internal error code, arguments: [kxfqupp_bad_cvl], [7940], [6], [0], [], [], [], []"
error when creating an index with parallel option. Which is strange because this has not been a problem until now. We just hit 60 million rows in a 45 column table, and I wonder if we've hit a bug.
Version 10.2.0.4
O/S Linux
As a test I removed the parallel option and several of the indexes were created with no problem, but many still threw the same error... Strange. Do I need a patch update of some kind?This is most certainly a bug.
From metalink it looks like bug 4695511 - fixed in 10.2.0.4.1 -
Error while creating resource group using non-globalzones.
Dear all,
Hi techs please guide me how to create failover resource group in nongloablzones.
I'm getting error while creating resource group using non-globalzones.
My setup:
I have two node cluster running sun cluster 3.2 configured and running properly.
node1: sun5
nide2: sun8
I have create non-globalzone "zone1" in node:sun5
I have create non-globalzone "zone2" in node:sun8
node:sun5# clrg create -n sun5:zone1,sun8:zone2 zonerg
*(C160082) WARNING: one or more zones in the node list have never been fully booted in the cluster mode,verify that correct zone name was entered.*
kindly guide me how to create Apache resource group using non-glabalzones, i'm new to sun cluster 3.2. please guide me step by step information.
Thanks in advance,
veera
Edited by: veeraa on Dec 19, 2008 1:54 AMHi Veera,
Actually you are getting a warning message where one of two things could have happened. Either you specified an incorrect zone name or one of the zones has not been fully booted. It's likely that you haven't booted the zones, so please follow this:
zoneadm list -iv
If zone1 or zone2 are not running then boot and configure them
zoneadm -z <zone> boot
zlogin -C <zone>
After that you can continue to follow the step by step instructions at
http://docs.sun.com/app/docs/doc/819-2975/chddadaa?a=view
These may also help
http://blogs.sun.com/Jacky/entry/a_simple_expample_about_how
http://blogs.sun.com/SC/en_US/entry/sun_cluster_and_solaris_zones
Regards
Neil -
Vehicle Scheduling Error:Error when creating transport structures in live C
HI Gurus,
We have one background job defined for Vehicle scheduling, which shows completed successfully but in log it says that :
: Error when creating transport structures in liveCache and Not possible to schedule shipment in the planning horizon.
My planning horizon is for 90 days from current date and demand horizon is for 30 days.
I have checked the VS profile and i dont find any problem with profile.
Can you please help me in finding what exaclty went wrong
Thanks,
AMolTry This..
1. Open the crystal client on your local machine and import that particular report.
2. Do Database -> Verify Database. Then refresh the report on your PC and make sure that it returns data as expected.
3. Export it back to repository and try scheduling it again. You can verify through CMC for Crystal Reports under " Database Configuration" property to make sure it points to the right ODBC.
Let us know. -
Error when creating a folder ,iviews in the portal
Dear sap gurus ,
I m facing a error when creating a Folder or an iview in my portal i'm using EP 7.0 sp11 ,The error is :
Portal Runtime Error
An exception occurred while processing a request for :
<b>iView : pcd:portal_content/com.sap.pct/admin.templates/iviews/editors/com.sap.portal.defaultFolderWizard
Component Name : com.sap.portal.admin.defaultwizards.DefaultFolderWizard
SQLException is not transient, error code = 1654, sql state = 72000 Batch rolled back. Caused by java.sql.BatchUpdateException: ORA-01654: unable to extend index SAPSR3DB.SYS_C004057 by 128 in tablespace PSAPSR3DB at oracle.jdbc.driver.DatabaseError.throwBatchUpdateException(DatabaseError.java:343) at oracle.jdbc.driver.OraclePreparedStatement.executeBatch(OraclePreparedStatement.java:10698) at com.sap.sql.jdbc.basic.BasicPreparedStatement.executeBatch(BasicPreparedStatement.java:263) at com.sap.sql.jdbc.oracle.Oracle10gPreparedStatement.executeBatch(Oracle10gPreparedStatement.java:100) at com.sap.sql.jdbc.direct.DirectPreparedStatement.executeBatch(DirectPreparedStatement.java:1129) at com.sap.sql.jdbc.common.CommonPreparedStatement.executeBatch(CommonPreparedStatement.java:991) at com.sap.engine.services.dbpool.wrappers.StatementWrapper.executeBatch(StatementWrapper.java:270) at com.sapportals.portal.pcd.pl.AttributeHeadersTable.insert(AttributeHeadersTable.java:259) at com.sapportals.portal.pcd.pl.PlObject.save(PlObject.java:518) at com.sapportals.portal.pcd.pl.PlContext.createSubcontext(PlContext.java:544) at com.sapportals.portal.pcd.gl.xfs.XfsContext.createChildOnPersistence(XfsContext.java:1374) at com.sapportals.portal.pcd.gl.xfs.XfsContext.createChildAndNotify(XfsContext.java:1128) at com.sapportals.portal.pcd.gl.xfs.XfsContext.createChild(XfsContext.java:1087) at com.sapportals.portal.pcd.gl.xfs.XfsContext.createSubcontext(XfsContext.java:843) at com.sapportals.portal.pcd.gl.xfs.BasicContext.createBasicSubcontext(BasicContext.java:190) at com.sapportals.portal.pcd.gl.PcdPersContext.createSubcontext(PcdPersContext.java:191) at com.sapportals.portal.pcd.gl.PcdFilterContext.filterCreateSubcontext(PcdFilterContext.java:254) at com.sapportals.portal.pcd.gl.PcdProxyContext.createSubcontext(PcdProxyContext.java:147) at com.sapportals.portal.pcd.gl.PcdGlContext.createSubcontext(PcdGlContext.java:440) at com.sapportals.portal.pcd.gl.PcdProxyContext.createSubcontext(PcdProxyContext.java:624) at com.sapportals.portal.pcd.gl.PcdProxyContext.createSubcontext(PcdProxyContext.java:619) at com.sap.portal.admin.wizard.folderwizardpanes.SavePane.doAfterSubmit(SavePane.java:59) at com.sapportals.admin.wizardframework.core.WizardInstance.doPost(WizardInstance.java:356) at com.sapportals.admin.wizardframework.core.WizardInstance.doWizard(WizardInstance.java:174) at com.sapportals.admin.wizardframework.core.WizardInstance.doWizard(WizardInstance.java:99) at com.sapportals.admin.wizardframework.AbstractDynamicWizard.doContent(AbstractDynamicWizard.java:98) at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209) at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114) at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189) at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215) at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645) at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189) at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753) at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240) at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522) at java.security.AccessController.doPrivileged(Native Method) at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) .
Exception id: 10:50_23/11/07_0005_16892850
See the details for the exception ID in the log file</b>
Thanks and Regards,
sathyaHi Sathya
The following line in your log tells you what is wrong:
ORA-01654: unable to extend index SAPSR3DB.SYS_C004057 by 128 in tablespace PSAPSR3DB
This is a configuration that you or the dba people need to do. The first thing I would check is if autoextend is on/off on your tablespace PSAPSR3DB. If it's 'off' you either need to put it to 'on' or manually extend the size of your tablespace depending on how much harddrvive space you have to play with. Here is a more detailed solution on how to do it:
Oracle Error : ORA-01654: unable to extend index string.string by string in tablespace string
Cause: Failed to allocate an extent of the required number of blocks for an index segment in the tablespace indicated.
Action: Use ALTER TABLESPACE ADD DATAFILE statement to add one or more files to the tablespace indicated.
Br
Göran
Maybe you are looking for
-
Unable to use MTS files or have AVCHD sequences presets
Unable to use MTS files in premiere pro cs5. I have a imac processor: 3.06GHz Intel Core 2 Duo, memory: 4 GB 1067 MHz DDR3, Graphics: ATI Radeon HD 4670 256 MB, software Mac OS X Lion 10.7.4. The software dont have none of the AVCHD or HD sequences
-
MIRO(PO inclusive of excise)
Hi , We have one issue regarding MIRO for PO inclusive of excise . We are following the MRP indicator process during MIGO-J1iex . For example PO value - 1000 (inclusive of excise) , Excise total -200 , Tax code V0 - (VAT condition record maint
-
Z87-GD65 fails to boot when I enable X.M.P.
Guys, Looking for any advise out there. I have two systems with new Z87-GD65 with an Intel 4770K and 16GB ADATA RAM and one of the systems fails to boot whenever I enable X.M.P. I've switched out the RAM from one system to the other and everything
-
Hi everyone, e use the user exit MV50AFZ1 to create billing automatically when Post Goods Issue is performed. Here we are getting an error: Log: 0017367105 000000 Document 0017367105 is currently being processed The required processing is stopped, as
-
Archive Logs Suddenly generating more
Hi to all, My production database is Oracle 9i Enterprise Edition and sitting in Windows Box. My Average Archive log file generation is 8 files a day. My single log file size is 50 MB. Suddenly from last month 25th onwards my log files count is 70 on