Error when executing DBMS_ERRLOG through Stored Procedures...

Hi,
We have TWO schemas like IDWH_ODS and IDWH_ERR running on Oracle 10g Rel.2.
The schema IDWH_ERR has direct SELECT privilege on all the base tables in IDWH_ODS schema. (As Pl/sql doesn't support ROLE, we have granted direct SELECT on each of the tables)
IDWH_ODS schema has tables like ACCOUNT & CUSTOMER, for which I need to create DML Error logging tables in IDWH_ERR schema.
I have one procedure 'Cr_Errlog_Tabs' in IDWH_ERR schema which gets all tables in IDWH_ODS and creates Error logging table in IDWH_ERR schema using DBMS_ERRLOG package. My problem starts here,
When I execute the DBMS_ERRLOG package in IDWH_ERR through SQL*Plus LIKE,
> exec DBMS_ERRLOG.CREATE_ERROR_LOG('idwh_ods.ACCOUNT','ERR$_ACCOUNT','idwh_err');
it's creating the error log table 'ERR$_ACCOUNT' in IDWH_ERR schema.
(...the same will be working when execute through Anonymous plsql block)
BUT, when i execute the DBMS_ERRLOG package with same parameters through the stored Procedure 'Cr_Errlog_Tabs', it throws the following error...
ORA-01031: insufficient privileges
Please let me know how the solution at the earliest.

WHY DO YOU FEEL YOU HAVE TO START A NEW THREAD FOR YOUR PROBLEM!?
Insufficient priv error when executing DBMS_ERRLOG through PLSQL

Similar Messages

Insufficient priv error when executing DBMS_ERRLOG through PLSQL

Hi,
I shall be grateful if any one of you give me the solution at the earliest.
I have 2 schemas like A & B those are running on Oracle 10g rel2.
As per my buz req' I need to create DML Error log table for 'A.T1' table in B schema using DBMS_ERRORLOG package.
I have granted direct SELECT on A.T1 to B (...not through ROLE as it doesn't work in plsql)
The problem is when i'm running the procedure,
DBMS_ERRLOG.CREATE_ERROR_LOG('A.T1', 'err_T1', 'B');
in SQL*Plus of B schema, it's creating the error log table successfully.
But the same will get failed when i run this error log procedure with in a procedure owned by B schema.
It throws 'ORA-01031: insufficient privileges'...
I hope this is related to privilege issue which is working fine in SQL*Plus but NOT in PLSQL stored procedure.
Awaiting your earliest reply.
Thanks.
- Ela

>I dont think it's an issue with direct privilege. Actually the
package is working when i execute it with in a ananymous block,
but the same get fails when execute it through procedures...
Role privs work with anonymous PL/SQL blocks. Does not work with stored PL/SQL code.
SQL> create user user1 identified by user1 default tablespace users quota 2M on users;
User created.
SQL> grant create session to user1;
Grant succeeded.
SQL> create role user1_role;
Role created.
SQL> grant create table, create procedure to user1_role;
Grant succeeded.
SQL> grant user1_role to user1;
Grant succeeded.
SQL> connect user1/user1
Connected.
PL/SQL procedure successfully completed.
SQL> create table x( n number );
Table created.
SQL> begin
2 execute immediate 'create table y( n number )';
3* end;
SQL> /
PL/SQL procedure successfully completed.
SQL> create or replace procedure CreateTable is
2 begin
3 execute immediate 'create table z( n number )';
4* end;
SQL> /
Procedure created.
SQL> exec CreateTable
BEGIN CreateTable; END;
ERROR at line 1:
ORA-01031: insufficient privileges
ORA-06512: at "USER1.CREATETABLE", line 3
ORA-06512: at line 1
SQL>

Insufficient privilege error when executing DBMS_ERRLOG through PLSQL

Hi,
I shall be grateful if any one of you give me the solution at the earliest.
I have 2 schemas like A & B those are running on Oracle 10g rel2.
As per my buz req' I need to create DML Error log table for 'A.T1' table in B schema using DBMS_ERRORLOG package.
I have granted direct SELECT on A.T1 to B (...not through ROLE as it doesn't work in plsql)
The problem is when i'm running the procedure,
DBMS_ERRLOG.CREATE_ERROR_LOG('A.T1', 'err_T1', 'B');
in SQL*Plus of B schema, it's creating the error log table successfully.
But the same will get failed when i run this error log procedure with in a procedure owned by B schema.
It throws 'ORA-01031: insufficient privileges'...
I hope this is related to privilege issue which is working fine in SQL*Plus but NOT in PLSQL stored procedure.
Awaiting your earliest reply.
Thanks.
- Ela

Hi,
It's not an issue with direct privilege. Actually the package is working when i execute it with in a ananymous block, but the same get fails when execute it through procedures...
Even we have given COMMENT ANY TABLE priv to the schema and that too didn't work out.
awaiting your reply.
-Saravanan

Error when executing DBMS_ERRLOG pkg through Stored Procedures...

Hi,
We have TWO schemas like IDWH_ODS and IDWH_ERR running on Oracle 10g Rel.2.
The schema IDWH_ERR has direct SELECT privilege on all the base tables in IDWH_ODS schema. (As Pl/sql doesn't support ROLE, we have granted direct SELECT on each of the tables)
IDWH_ODS schema has tables like ACCOUNT & CUSTOMER, for which I need to create DML Error logging tables in IDWH_ERR schema.
I have one procedure 'Cr_Errlog_Tabs' in IDWH_ERR schema which gets all tables in IDWH_ODS and creates Error logging table in IDWH_ERR schema using DBMS_ERRLOG package. My problem starts here,
When I execute the DBMS_ERRLOG package in IDWH_ERR through SQL*Plus LIKE,
> exec DBMS_ERRLOG.CREATE_ERROR_LOG('idwh_ods.ACCOUNT','ERR$_ACCOUNT','idwh_err');
it's creating the error log table 'ERR$_ACCOUNT' in IDWH_ERR schema.
(...the same will be working when execute through Anonymous plsql block)
BUT, when i execute the DBMS_ERRLOG package with same parameters through the stored Procedure 'Cr_Errlog_Tabs',
it throws the following error...
ORA-01031: insufficient privileges
Please let me know the solution at the earliest.
Thanks.
-Saravanan

duplicate post
Insufficient privilege error when executing DBMS_ERRLOG through PLSQL

Error when linking report to stored procedure defined with one input parm

Error when linking report to stored procedure defined with one input parameter
The report will work ok, when the parameter is removed from the stpred procedure
An unhandled win32 exception occurred in crw32.exe[4480]
Stored Proc (sql server 2005)
USE [Allegro]
GO
/****** Object: StoredProcedure [dbo].[SP_Test]    Script Date: 07/08/2009 10:42:14 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER procedure [dbo].[SP_Test](@valuationmode VARCHAR(55)) as
Begin
select
     valuation,
     valuationtime,
     valuationmode
from valuation
where valuationmode = @valuationmode;
End;

This is an example of a stored procedure that is trying to be linked to a new report as the only datasource.
If I remove the parameter I can create a report, however this will return all of the results of thw query to the report, rather than the desired results. If I add the parameter on the Crystal Report, the stored procedure then has to return all of the results to Crystal and then perform the filtering of records. By using a parameter in the stored procedure, you should be able to do all of the filtering as part of the query on the databse server, making this more efficient.

Out of memory error when calling a java stored procedure multiple times

Trying to run a PL/SQL loop calling a java stored procedure, I get the following error:
"ORA-04030: out of process memory when trying to allocate 262188 byte callheap,ioc_allocate free)"
(with some other error lines).
The stored procedure does two major things:
1) Open a socket to communicate with a server, of which it queries some data.
2) Use JDBC (with the default DB connection it has, as a stored procedure) to write the results to a table.
All socket connections, statements, etc. are properly closed and all memory should be garbage collected between each call.
Can anyone offer an explanation or additional checks to make? I'm quite sure the code isn't causing the problem, since I've tried running it as a stand alone application (outside of Oracle) and didn't have any problems.
Thanks.

Hi,
Verify that the database parameters are set correctly.
EA

Error when call sql server stored procedure

hello everybody,
I'm working with MII 14 and I want call a SqlServer stored procedure provided from my customer.
I configured a FixedQuery like this:
[dbo].[spElencoEntrateUscite_AV] @delta = 0, @daquando='130101', @CompanyID='000002', @Elenco = @MyCursor OUTPUT
but when i test the query i have back the error:
com.microsoft.sqlserver.jdbc.SQLServerException: Must declare the scalar variable "@MyCursor".
I tried also to set the query like this:
[dbo].[spElencoEntrateUscite_AV]
and pass Parameters:
0
130101
000002
OUTPUT
but i have this error:
com.microsoft.sqlserver.jdbc.SQLServerException: Procedure or function 'spElencoEntrateUscite_AV' expects parameter '@Elenco', which was not supplied.
Any suggestion?
thanks in advance
Alex

hello Kuldeep!
yes i solved.
I used fixed query in MII and declared the cursor:
example:
DECLARE @MyCursor CURSOR
EXEC [dbo].[spElencoEntrateUscite_AV] @delta = 0,@daquando='[Param.1]', @CompanyID='[Param.2]', @Elenco = @MyCursor OUTPUT
I hope this may help u
Alessandro

Getting HeapDump on out of memory error when executing method through JNI

I have a C++ code that executes a method inside the jvm through the JNI.
I have a memory leak in my java code that results an out of memory error, this exception is caught in my C++ code and as a result the heap dump is not created on the disk.
I am running the jvm with
-XX:+HeapDumpOnOutOfMemoryError
-XX:HeapDumpPath=C:\x.hprof
Any suggestions?
Thanks

I'll rephrase it then.
I have a java class named PbsExecuter and one static method in it ExecuteCommand.
I am calling this method through JNI (using CallStaticObjectMethod). sometimes this method causes the jvm to throw OutOfMemoryError and I would like to get a heap dump on the disk when this happens in order to locate my memory leak.
I've started the jvm with JNI_CreateJavaVM and I've put two options inside the JavaVMInitArgs that is used to create the Jvm. -XX:+HeapDumpOnOutOfMemoryError and -XX:HeapDumpPath=C:\x.hprof
which supposed to create a heap dump on the disk when OutOfMemoryError occurs.
Normally if I would execute normal java code, when this exception would occur and I wouldn't catch it the Jvm would crash and the heap dump would be created on the disk.
Since I need to handle errors in my C++ code I am use ExceptionOccured() and extracts the exception message from the exception it self and write it.
For some reason when I execute this method through JNI it doesn't create the dump.

Memory error when executing package through SQL Server Agent.

Hi!!
I have a problem with a package (SSIS) when run on SQL Server Agent.
The job is configured
with the proxy and the account has the
required privileges. Runs perfectly
if the job runs manually, but if I let it
run on schedule I get a memory error.
Also if I run the
package through DTExec.exe or VS2008,
everything runs smoothly.
I am using SQL2008R2.
If someone has something similar happened
and have found how to fix it please i need
to know how.
Thank you.

This is most likely your issue:
http://support.microsoft.com/kb/824422

ORA-03113 error when running the Java stored proc demos

Hi there,
Has anyone else run into this issue. When attempting to transfer an object type from Java to Oracle - through a Java stored proc - the session crashes with:
ORA-03113: end-of-file on communication channelLooking in the trace file generated the error message looks something like:
ksedmp: internal or fatal error
ORA-07445: exception encountered: core dump [0x8fe04468] [SIGTRAP] [unknown code] [0x8FE59034] [] []
Current SQL statement for this session:
select pointruntime.jdistance(point(1, 2), point(2, 3)) from dual
----- Call Stack Trace -----
calling              call     entry                argument values in hex
location             type     point                (? means dubious value)
ksedmp+764           call     ksedst               0 ? 2C4F4A ? 2C ? 98968000 ?
                                                   DB02C ? 27A50000 ?
ssexhd+956           call     ksedmp               3 ? 0 ? 8FE5E790 ? 5905870 ?
                                                   8FE0434C ? 40895E4 ?
0x9012c860           call     ssexhd               5 ? BFFEEF70 ? BFFEEFB0 ? 0 ?
                                                   0 ? 0 ?As you can see from the trace snippet above, I was attempting to run one of the Oracle Java stored procedure demos. Has anyone successfully run those demos? Specifically the ones where complex types (table objects or the Point object) are passed back to Oracle from the JVM.
I would appreciate some help with this. The code works fine in a Windows or Solaris environment but barfs on Apple. Truly annoying....
Anyone?
Thanks in advance,
Alex

Yes,
Apologies for not stating that information, Steve. Was a bit naughty of me! I guess the reason I didn't was because I just wanted to hear if anyone else running Oracle on Mac received such errors when executing the Java stored proc demos (specifically, the execution of PointRuntime.jDistance). Nevertheless, here's the relevant info from the trace file:
Dump file /Users/oracle/admin/sandbox/udump/sandbox_ora_1861.trc
Oracle Database 10g Enterprise Edition Release 10.1.0.3.0 - Production
With the Partitioning, Oracle Label Security, OLAP and Data Mining Scoring Engine options
ORACLE_HOME = /Users/oracle/product/10.1.0/db
System name:     Darwin
Node name:     maczilla.local
Release:     8.3.0
Version:     Darwin Kernel Version 8.3.0: Mon Oct 3 20:04:04 PDT 2005; root:xnu-792.6.22.obj~2/RELEASE_PPC
Machine:     Power Macintosh
Instance name: sandbox
Redo thread mounted by this instance: 1
Oracle process number: 10
Unix process pid: 1861, image: [email protected] for the Java version, according to the readme file in the javavm directory, I am running 1.4.1:
1.5 Java Compatibility
This release has been thoroughly tested with Sun's Java Compatibility
Kit for the JDK 1.4.1. Oracle is committed to OracleJVM keeping pace
with Java and other Internet standards.

Error when executing statement for table/stored proc

Hi All,
 I am getting this error when executing IDOC to JDBC (Stored Procedure) Scenario.
 In my stored procedure I have three insert statements to insert rows in to 3 tables.
 This stored procedure is working fine for two insert statements i.e,
 For this I have created data type for stored procedure with 10 elements and executed the scenario and was successfully running.
 when I added 3rd insert statement to stored procedure ie., when i added 5 more elements to the datatype (totally 15 elements) it starts giving the bellow error in Message Monitoring.
Exception caught by adapter framework: Error processing request in sax parser: Error when executing statement for table/stored proc. 'COGRP_TMP_PROC_1' (structure 'Statements'): java.sql.SQLException: General error
Delivery of the message to the application using connection JDBC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'COGRP_TMP_PROC_1' (structure 'Statements'): java.sql.SQLException: General error
 Note:- I have run the stored procedure with three insert statements in Sql Server, and also by calling an external program also, and was working fine.
 Note : Is there any structure needs to be follow when working with IDOC to Stored procedure.
I am struck up with the error, can any body resolve this issue.
Thanks in Advance,
Murthy

Hi narasimha,
 This seems to be any error due to incorrect query formation.In your receiver jdbc channel set the parameter logSQLstatement = true.you can find this parameter in the advanced mode. Using this parameter you will be able to see the sql query which is generated at runtime in the audit log in RWB.
Regards,
Pragati

File to JDBC :Error when executing statement for table/stored proc.

Hi,
I am getting following error when i am trying to insert data into z-table using JDBC recr adapter.
Error while parsing or executing XML-SQL document: Error processing request in sax parser: Error when executing statement for table/stored proc. 'ZTEST' (structure 'STATEMENT'): java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC][SQLServer]Invalid object name 'ZTEST'.
But the database table name 'ZTEST' exists in the system.
XML structure:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_RECR xmlns:ns0="http://urn:srini/FileToJDBC">
 <STATEMENT>
 <TEST action="INSERT">
 <table>ZTEST</table>
 <access>
 <ROLLNO>123</ROLLNO>
 <FIRSTNAME>ABC</FIRSTNAME>
 <LASTNAME>XYZ</LASTNAME>
 </access>
 </TEST>
 </STATEMENT>
</ns0:MT_RECR>
Regards,
Srinivas

Hi,
I have changed my MT str but still getting the same error.Is it possible to insert/ update a z-table using JDBC adapter.
XML str:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_RECR xmlns:ns0="http://urn:srini/FileToJDBC">
 <STATEMENT>
 <ZTEST action="INSERT">
 <access>
 <ROLLNO>123</ROLLNO>
 <FIRSTNAME>abc</FIRSTNAME>
 <LASTNAME>XYZ</LASTNAME>
 </access>
 </ZTEST>
 </STATEMENT>
</ns0:MT_RECR>
Regards,
Srinivas

Error when executing d2kwutil.pll procedure

Hi all,
I use a client/server architecture.
There was an error when executing the procedure write_registry in the w2kutil.pll. I created a test forms , and I just created a control block containing a button. In the when-button-pressed trigger I coded : win_api_environment.write_registry('HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE','TEST_REGISTR','D:\MYLOGS',true); . I already attached the d2kwutil.pll to the form module.
The error is : FRM-40734: internal error : pl/sql error occurred.
So how to resolve it ?
Thank you very much indeed.

You have that atachar the bookstore to the form and then you can make use of the contained functions inside the bookstore.

Error when executing statement for table/stored proc DB2 - Data Truncation

Hi,
I have one call sp in XI with n parameters int and two parameters out.
well, to implement the interface gives the following error
com.sap.aii.af.ra.ms.api.DeliveryException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'SPSAPAR9' (structure 'Statement'): java.sql.SQLException: The number of parameter values set or registered does not match the number of parameters
Thanks for your help
Ximena
Edited by: Ximena Gonzalez on Feb 19, 2008 11:50 AM
Edited by: Ximena Gonzalez on Feb 20, 2008 12:17 PM

My Error is change
Error while parsing or executing XML-SQL document: Error processing request in sax parser: Error when executing statement for table/stored proc. 'SAPPRG.SPSAPAR9' (structure 'Statement'): java.sql.DataTruncation: Data truncation
but de change DT SP
<?xml version="1.0" encoding="UTF-8" ?>
<ns1:AlistReqDet2_MT xmlns:ns1="urn:proxl:tmuc:proxl01:AlistReqItems">
<Statement>
<SPSAPAR9 action="EXECUTE">
<table>SAPPRG.SPSAPAR9</table>
<ISAPNU1 isInput="TRUE" type="STRING">0080000353</ISAPNU1>
<ISAPEM1 isInput="TRUE" type="STRING">'LU'</ISAPEM1>
<ISAPC05 isInput="TRUE" type="STRING">15353</ISAPC05>
<ISAPSEC isInput="TRUE" type="STRING">10</ISAPSEC>
<ISAPLOT isInput="TRUE" type="STRING">'lats'</ISAPLOT>
<ISAPCA1 isInput="TRUE" type="STRING">10</ISAPCA1>
<ISAPCA2 isInput="TRUE" type="STRING">10</ISAPCA2>
<ISAPKIL isInput="TRUE" type="STRING">10</ISAPKIL>
<ISAPES1 isInput="TRUE" type="STRING">'T'</ISAPES1>
<ISAPSW isOutput="TRUE" type="STRING" />
</SPSAPAR9>
</Statement>
</ns1:AlistReqDet2_MT>

Error when executing statement for table/stored proc. : ORA-00911

Hi All,
I am posting IDOC->XI->JDBC, approx 5000 Idocs.
But few messages are giving following error in XI-_SXMB_MONI
Can any one guide me what is the cause of error? I check whole Idoc data I am not able to see bad character? can any once guide me what are the bad character in XML to post data in oracle? so that i can search in XML and how to avoide this error.
"com.sap.aii.af.ra.ms.api.MessagingException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'HRP1001' (structure 'INSERT_PAD34'): java.sql.SQLException: ORA-00911: invalid character"

> I am talking about following IDOC.<ZRMD_A06> ->
> <E1PLOGI SEGMENT="1">-> <E1PITYP SEGMENT="1"> ->
> <E1PAD34 SEGMENT="1"> -><PROZT>0.00 #</PROZT>.
> Can we remove this # during message mapping in XI??
sure you can remove it using Replace function or by writing UDF.
as I am seing # is last character..so remove # with " " (single space) and then use the TRIM fucntion.
Thanks
Farooq.
*Rewards points if you find it useful*

Error when executing DBMS_ERRLOG through Stored Procedures...

Similar Messages

Maybe you are looking for