Error when generating logical port in SOAMANAGER

Hi,
When generating the logical port in SOAMANAGER transaction I get an error message 'SRT Framework exception: Uninstantiated object "subject sidl service" in method IF_SRT_WSP_CONFIG_SIDL~CREATE_CLNT_CFG_FROM_WSDL_D of class CL_SRT_WSP_CONFIG_SIDL'.
Does anyone know what the problem might be?
Thans in advance.
Kind regards,
Amel Alic

Hi,
I, by mistake, reported the same problem; however the problem is that I referenced the WSDL without endpoint (WSDL service name....). I took this URI from Servces Registry, but was wrong (altough on the SR there were a valid binding+endpoint).
I put the right IRU pointing to the compete Service COntract (with endpoint reference), and it worked.
If you did't solve the problem, try to opern on the browser the URI you are referring to, and see, at the end if it contains the endpoint like that:
<wsdl:service name="zsMy2ndCodeFirstWebService">
<wsdl:port name="zsMy2ndCodeFirstWebServiceBinding" binding="tns:zsMy2ndCodeFirstWebServiceBinding">
<soap:address location="http://xyz:8000/sap/bc/srt/rfc/sap/.....my service operation..." />
</wsdl:port>
</wsdl:service>
Hope this help.
Regards
Roberto

Similar Messages

Error generating logical port in SOAMANAGER

Hi,
When generating the logical port in SOAMANAGER transaction I get an error message 'SRT Framework exception: Uninstantiated object "subject sidl service" in method IF_SRT_WSP_CONFIG_SIDL~CREATE_CLNT_CFG_FROM_WSDL_D of class CL_SRT_WSP_CONFIG_SIDL'.
Does anyone know what the problem might be?
Thanks in advance.
Fernando.

Hi,
go to SICF transaction under /sap/bc/srt/wsil path, test the service and look for service provider you want to consume.
you get 2 links then test for logical port.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/media/uuid/20eb3174-41ab-2a10-a383-907faf60eed3
The link is constructed in the following way:
http://<host_name>:<port>/sap/bc/srt/wsil?sap-client=<sy-mandt>
or you can use transaction SICF then navigate to node /sap/bc/srt/wsil
and press "Test service" from the context menu.
In case there is a Service Registry in your system landscape to which the provider system is connected the profile-based endpoints could be found in that Service Registry as well.
you can follow note 1330545
/people/franklin.herbas/blog/2007/12/11/service-modeling-with-the-esr
/people/peter.mcnulty/blog/2008/02/04/service-implementation-in-abap
regards
nag
Edited by: welcomenag on Jun 25, 2009 5:56 PM

Error when creating Logical Port via WSDL on SOAMANAGER

Hi,
When creating Logical Port via WSDL on SOAMANAGER we're getting the following error:
"Uninstantiated object u201Csubject sidl serviceu201D in method IF_SRT_WSP_CONFIG_SIDL~CREATE_CLNT_CFG_FROM_WSDL_D of class CL_SRT_WSP_CONFIG_SIDL".
We're consuming a WS provided by a .NET application.
Our system is ECC 6.0 NW 7.01SP 7.
Anyone have faced this error before?.

hI,
Please go through this link , you will get the solution
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/media/uuid/20eb3174-41ab-2a10-a383-907faf60eed3

Error while creating logical port in SOAMANAGER

Hi,
Im consuming the webservice.While creating the new logical .Im getting the following error.
Error: Error in WSDL access: Exception occurred in communication framework:Error in HTTP Framework:401Unauthorizedhttp://vmtmasterdev.rune2emaster.rune2e.com:1080/sap/bc/srt/wsdl/sdef_Z_NUMBER/wsdl11/ws_poli
I have entered logical port name,description, URL for WSDL access.When i press enter i got the above eeror.
Please help me.
Regards,
Brahmaji

Hi,
tell me please wenn you run SOAMANAGER you have to apply an user Authentication or not?
If yes If the service that you want to configure is an Enterprise Service or Self-Modelled Service.
In case of Web Services Please Check again in The ICF Services under
sap/bc/srt/SAP and Check if your Service activated or not.
If you don´t have Access to SOAmanagement you can see the specified Roles hier
http://help.sap.com/saphelp_nw04s/helpdata/en/2b/07074155bcf26fe10000000a1550b0/frameset.htm
Regards
A.Labrache

Error in creating Logical Port in SOAMANAGER

Hello,
I create a consumer proxy for http://www.thomas-bayer.com/axis2/services/BLZService?wsdl. No when I am trying to create a logical port I am getting SRT Exception. I am able to open the link in IE. What shall I do to solve it?
Regards,
Ahmed

What type of SRT error you are getting? post complete message.
SRT error with unsupported xstream means service provider is returning non-xml message (HTML).
Please note I am able to get wsdl of this service but not the endpoint (HTTP return code: 500) so read documentation carefully if there is any additional requirement to access this service.
Regards,
Gourav

Error while creating logical port in SOAMANAGER and testing it

Hi,
When I enter WSDL Access user and password in cnfiguration tab( SOAMANAGER),Im getting error as,
Error: Error in WSDL access: Exception occurred in communication framework:Error in HTTP Framework:401Unauthorizedhttp://cryo-cell.net/Inventory/Inventory.asmx?WSDL .
if I didnt enter WSDL Access user and password in cnfiguration tab( SOAMANAGER),Im not getting error.
I continued with out giving WSDL Access user and password
I consumed the asp .net webservice, while testing it (test service consumer, SE 80) ,I got following error
after giving user id and password.
SOAP:1.007 SRT :Unsupported xstream found:
(HTTP code 401 : unautorized")
please help.
Regards,
Brahmaji

Hi,
tell me please wenn you run SOAMANAGER you have to apply an user Authentication or not?
If yes If the service that you want to configure is an Enterprise Service or Self-Modelled Service.
In case of Web Services Please Check again in The ICF Services under
sap/bc/srt/SAP and Check if your Service activated or not.
If you don´t have Access to SOAmanagement you can see the specified Roles hier
http://help.sap.com/saphelp_nw04s/helpdata/en/2b/07074155bcf26fe10000000a1550b0/frameset.htm
Regards
A.Labrache

Unable to create logical port in SOAMANAGER

Hi All,
When Im tryign to create a logical port for my consumer proxy I get
SRT Framework exception: HTTP: Current user does not have the required authorization to access the HTTP destination.
Any clue what authrizations I need? I didnt get this error while generating the proxy from the wsdl and Im using the same userid/pwd.

Hi,
Even I get the same error.
SRT Framework exception: HTTP: Current user does not have the required authorization to access the HTTP destination
I found the note : Note 1240233 - Error when maintaining logical ports using SOAMANAGER.
Applied the note, still the same error.
Have this issue is resolved?
Any other solution?
Regards,
Sunil.

Error Message "No logical port exists to call web services" installing SM7

I am trying to use SLM to download a service stack. However, the option is not available in step 2.5. There is an error message "No logical port exists to call web services". I have performed the Wizard install, but the Wizard seems to have left out this step. I have looked around for documentation on how to configure the port, but cannot find anything more useful than comments to the effect that I should configure the port.

I found the problem, I think, although I am now on to the next problem. "Web Services for software lifecycle manager not available'.
The documentation is lacking. When the RFC connection is set up, the user id is j2ee_admin, using the install password. This is not specified anywhere in the install instructions that I could find, there is only a reference to a 'user id and password'.
The LPCONFIG is used to create a logical port, that ties the RFC to the LP. However, no name is specified that is to be used for the LP.

Error when generating the report in Production Server

Hi,
I have created one infoset query in Development server of my client. It is working fine there. I had transported the request containg this query to Production server. But whenever I am trying to generate report using this query in Production server it is giving an error message
"Error when generating the report".
I am not getting what 's problem.
Samriddhi

Samriddhi,
Genarally its not suggested to transport Queries. Should be able to create Queries directly Production. There might be diferences between your Development and Production versions.
Thanks.

Error When generating dataprovider

HI ,
i get an error message while executing a query in rsrt.
"Error When generating dataprovider
Notification Number BRAIN 282 "
require help in this regard,
Rakesh.

By best approach in that case is trial and error.
Copy that query to a new one and change it step by step (creating it simpler, by removing key figures and characteristics) executing it in each step until you don't find the error. There you can see what is causing that error.
Diogo.

Error when generating the report (see long text), Message no. AQ_AD_HOC221

Hi All,
I am facing a peculiar problem while executing an infoset query.I have created 2 customized fields Compa-ratio and PIR in infotype 0008 in an infoset.I have coded in these additional fields.
When I execute a query using 1 of these customized fields the report is generated correctly.But when I put both the fields in the output the report shows an error "Error when generating the report (see long text)". The message# associated with this errAQ_AD_HOC221.
I have also checked the data types and the references. Nothing seems to be wrong here.
Does anybody has any clue about this ?
Kajal

Hi Bernd,
I had a look at those notes. But the information provided did'nt prove to be helpful. I found out the problem. I was using the same local variable for both the fields in their code. This generated the error. This error is a very generic one and does'nt help in finding out what exactly is the problem.
I changed the other local variable and it started working. When I was using the same variable that time I did'nt forget to clear the values but the query still generated the error.
Anyways thanks a lot for the reply.
Kajal

Error 500 Internal Server Error" When Generating Hyperion Financial Reports in PDF Format

We are unable to open pdf reports in Workspace with the following error. It was all working fine and doesn't work now for unknown reasons.
Error 500 Internal Server Error" When Generating Hyperion Financial Reports in PDF Format
We are on 11.1.2.1 environment. Ghost Script 8.54 and Java heap settings xms256m and xmx512m.
Please advice.

hello,
just to clarify
a) the parameter is named DESFORMAT not :DESFORMAT, there is
no : in front of the name, if you submit it via URL !
b) there are some issues with acrobat5 and IE but those are not
only caused by PDFs generated with oracle reports.
regards,
the oracle reports team --pw

Error while determining logical Port

Hi
This is a ECC to SRM scenario:
I get this error in the Call Adapter step. I am using WS Adapter at the receiving side.
"Error while determining logical port Cannot find logical port for agreement abc and interface xyz"
Why do I get that error and any suggestions ?
Regards
Harish

Baskar,
I didn't fix any issue. I was trying tofind out why the error happens. There is a proxy created at ECC side. I saw that. But target is using WS Adapter and it's that adapter which is throwing errors about logical port.
I read the blog but couldn't figure out. Does WS Adapter need proxy code? Can it work without proxy code? I don't see any proxy code for receiver WS Adapter. I was wondering whether the absence of the proxy code gave this error about logical port
Regards
Harish

Error when generating catalog SRM_EXTRACTED_CTLG

Dear All,
We are trying to transfer product and contract catalogs from SRM server to Catalog authoring tool. The RFC connections were created and scenarios in XI have been imported as per the cookbook. The XI part seems to be working fine and a correct response was received by XI (as per SXMB_MONI), but we find the following error in the SRM application log (tcode: SLG1)
The following exception was raised:
/CCM/CX_OBJECT_CREATION_FAILED
Error when generating catalog SRM_EXTRACTED_CTLG
The exception occurred at the following point:
Program /CCM/CL_CATALOG_MANAGER=======CP
$EXC_CLASS /CCM/CX_OBJECT_NOT_FOUND
The earlier threads seemed to mention applying service packs so we did a check and found everything fairly up to date, as follows:
SRM Server 5.5 (Service Pack 4)
ABAP Rel 7 (Service Pack 7)
CCM Server 2 (Service Pack 4)
As I'm basically an XI person, I'm not sure how to debug this error. Can anyone please help me out on his?
Thanks and Regards
Arun

Hi All,
Just bumping up my question again. Any pointer on this... please?
Best regards,
Arun

Error when Generating the Program

Recently there was an SP upgrade and my Planning Book started giving me this error message (SCM version =5.0 and SP = 7)
"Error when generating the program" Message no. /SAPAPO/TSM141
Diagnosis: Generated programs are programs that are generated based on individual data objects, such as planning object structure, planning areas and Infocubes. These programs are then executed in the transaction. An error occured during the generation of such a program
Possible causes:
1. The template has been corrupted
2. The object that the template uses to generate the program contains inconsistencies; for instance an Infocube has not been activated
This error occurs when I try to open the my planning book/creating the selection profile. I've re-activated the Infocube and later deactivate and active my POS and tried to do the same for the Planning Area....but the error still persists. I tried to create a new planning area and tried it again but the error still persists. I've tried to fix any inconsistencies in the planning area time series objects by running the consistency check....however the same error pops up during the consistency check....
Anyone encountered this error message and any possible solutions to this issue.
Thanks
Surender

I did find an ABAP Dump when looking at ST22. The short message is as follows:
Runtime Errors         GEN_BRANCHOFFSET_LIMIT_REACHED
Date and Time          05/14/2007 19:33:54
Short text
     Jump distance is too large and cannot be generated.
What happened?
     A jump distance is too large and cannot be generated.
     A control structure or a routine with "CHECK" or "EXIT" contains
     too many ABAP statements.
     Error in the ABAP Application Program
     The current ABAP program "GP_MET_PSTRU_BASIC_FORMS" had to be terminate
      because it has
     come across a statement that unfortunately cannot be executed.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Error analysis
     During the generation of program "GP_MET_PSTRU_BASIC_FORMS", the system
      determined that
     within an ABAP event a control structure (for example, IF..ENDIF
     or LOOP..ENDLOOP) or a routine (for example, FORM routine) has
     become too large. The resulting jump distance is too large so that
    it could no longer be generated.
    With the internal load format, the jump distance must not be
    greater than 32768 (this is the size of approximately 10.000
    ABAP statements).
    The jump distance that is to be generated, however, is 50885.
How to correct the error
   The ABAP application program must be changed.

Error when generating logical port in SOAMANAGER

Similar Messages

Maybe you are looking for