Error when hitting PI runtime cache - Value Mapping Replication

Hi,
Below is the error
Delivery of the message to the application using connection JPR failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error processing inbound message. FaultException: com.sap.aii.proxy.xiruntime.core.ESPXISystemFaultException: Error encountered during processing of XI request message in inbound ESP; Hint: com.sap.engine.interfaces.webservices.runtime.RuntimeProcessException: Unexpected uriID '/{http://sap.com/xi/XI/System}ValueMappingReplication'. Found: BindingData 'null', interfaceMapping 'null' interfaceDefinition 'null'
.................. working on ValueMappingReplication .. where am i going wrong?
below is the URL I am hitting PI server with from SOAP UI (the above error is in Message Monitor):-
http://host:port/XISOAPAdapter/MessageServlet?senderParty=&senderService=BC_ValueMappingRep&receiverParty=&receiverService=&interface=ValueMappingReplicationOut&interfaceNamespace=http://sap.com/xi/XI/System

Hi Diptendu - I don't think it's an issue with URL.
Did you register the service?
http://<host>:<port>/ProxyServer/register?ns=http://sap.com/xi/XI/System&interface=ValueMappingReplicati
onOutSynchronous&bean=localejbs/sap.com/com.sap.xi.services/ValueMappingApplicationSynchronous&m
ethod=ValueMappingReplicationOutSynchronous
Reference :
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e07dd2ae-f783-2c10-9aa6-ca69f67dd20f?QuickLink=index&…
what is your receiver channel?

Similar Messages

Value mapping replication - java cache

i used value mapping replication and successfully loaded values to the java cache (i can see the in the cache monitoring but not in the configuration).
when i try to use a scenario with value mapping using the agencies and schemes which i loaded, the mapping doesn't work and i receive the same value that was entered.
what could be the problem?
P.S
i used the same groupid for each pair of source and target value when i loaded them. is that the right way?

Tomer,
what is the context that u used. Did you give the correct context in mapping as in Runtime Cache.
Regards,
Sudharshan N A

Cache update in value mapping replication

Could anyone let me know when value mapping replication of mass data is done , the updated values in the java runtime cache that we can view in RWB->Cache Monitoring->Mapping Runtime Cache - are they deleted on system restart or are persisted somewhere.Is it only cached in Java memory and after restart we need to re invoke the scenario again to update the same.
Regards
Subhro

Hi,
You can refer the following post which talks about the same issue.
Re: Value Mapping Considerations for significantly high input
Also, go through this link for value mapping replication
http://help.sap.com/saphelp_nw04s/helpdata/en/2a/9d2891cc976549a9ad9f81e9b8db25/content.htm
Regards

How to achieve transport of value mapping replication cache table values ?

During the migration of our interface from XI3.0 to PI 7.11,
I need to transport the value mapping replication cache table values present in cache monitoring of runtime workbench in
XI 3.0 PRD to PI 7.11 DEV .
Please let me know the ways to acheive this so that I can have the same values present in PI 7.11 Value Mapping Cache table as maintained in XI 3.0.
Please point me into correct direction.
Regards
PS

Click on "Tools" option, select "Export Configuration Objects" -> "Individual Objects" -> Choose the "Value Mapping Group" type, and then select the value mappings you want to transport.

Value Mapping Replication - Issue - Authorization Error

Hi all,
I am trying to do value mapping replication of the data from a table in ECC system using an outbound proxy on ECC and ASync Inbound interface on XI - valuemappingreplication.
Steps followed:
1. Created Table Stucture and did write a report to extract the data from the table in ECC to send the data through Outbound proxy.
2.Followed this blog - Value Mapping replication
When tried to execute the scenario after all the steps in the above blog, we have an error in sxmb_moni saying that the authentication failed. I used pisuper, pidiruser in the receiver communication channel
3.Generated a Java Proxy for the valuemappingreplication interface.
4.Tried to deploy the .jar from the above step using SDM, I was not able to deploy it.
reg
Edited by: naveen chitluri on Jul 16, 2008 12:55 PM

All,
For the value mapping replication,
I have tried to send the message to URL directly for RWB, Test Message in the Component Monitoring http://server:50400/MessagingSystem/receive/JPR/XI.
I am getting an error saying that:
Delivery of the message to the application using connection JPR failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Interface urn:flatfile:to:flatfile#MI_EMP_FILE_ASYNC_OUT not registered: com.sap.aii.proxy.xiruntime.core.XmlRecoverableException: Interface urn:flatfile:to:flatfile#MI_EMP_FILE_ASYNC_OUT not registered
Can anyone throw some light on this.
reg

401 - Unauthorized error in Value Mapping Replication scenario

Hi,
I'm trying to push some Value Mapping replication data from one of the clients (which is a non-Integration Server) of XI system to IS. When I execute the program which calls the outbound proxy, the XI message fails with the error HTTP_RESP_STATUS_CODE_NOT_OK 401 Unauthorised.
As given in SAP help, I registered the inbound java proxies and generated the outbound proxies. I confiured the receiver channel with path /MessagingSystem/receive/JPR/XI. In authentication data, I tried several users such as XISUPER, XIAPPLUSER, XIISUSER..Still I get the same error.
What is missing/wrong?
Thanks in advance
Praveen Sirupa

Hi Praveen,
Could you pls do the following...just for verification....
enter the url http://<was_server>:5<sysnr>00/MessagingSystem/receive/JPR/XI
and when it asks for authentication give the XIAPPLUSER and password...you should get an xml that looks like this...
<?xml version="1.0" encoding="UTF-8" ?>
- <scenario>
<scenname>MSG_SCEN</scenname>
<scentype>SERV</scentype>
<sceninst>MSG_001</sceninst>
<scenversion>001</scenversion>
- <component>
<compname>SERVLET</compname>
<compdesc>Messaging System</compdesc>
<comphost>localhost</comphost>
<compinst>MSG_001</compinst>
- <message>
<messalert>OKAY</messalert>
<messseverity>100</messseverity>
<messarea>QR</messarea>
<messnumber>801</messnumber>
<messparameter>na</messparameter>
<messtext>MessagingServlet is active.</messtext>
</message>
</component>
</scenario>
Thanks,
Renjith

Getting Error :Error when instantiating WebService runtime

Hello All,
I am a new to Webservices and writing a test program .I am using the ECC 5.0 .I am calling a Webservice from R/3 .I am trying to call this webservice :[http://webservices.daehosting.com/services/isbnservice.wso?WSDL].
I am getting the following exception
{<?xml version="1.0" encoding="utf-8" ?>
- <asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
- <asx:values>
<SYSTEMFAULT href="#o68" />
</asx:values>
- <asx:heap xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:abap="http://www.sap.com/abapxml/types/built-in" xmlns:cls="http://www.sap.com/abapxml/classes/global" xmlns:dic="http://www.sap.com/abapxml/types/dictionary">
- <cls:CX_AI_SYSTEM_FAULT id="o68">
- <CX_ROOT>
<TEXTID>F63AFF63DBE4BB4786A7F52CC4167145</TEXTID>
<PREVIOUS href="#o55" />
<KERNEL_ERRID />
- <INTERNAL_SOURCE_POS>
<PROGID>191</PROGID>
<CONTID>558</CONTID>
</INTERNAL_SOURCE_POS>
</CX_ROOT>
<CX_STATIC_CHECK />
- <CX_AI_SYSTEM_FAULT>
<CODECONTEXT>Local</CODECONTEXT>
<CODE>ERROR_WEBSERVICE_RUNTIME_INIT</CODE>
<ERRORTEXT>Error when instantiating WebService runtime (Error when initializing SOAP client application )</ERRORTEXT>
<LANGUAGE />
</CX_AI_SYSTEM_FAULT>
</cls:CX_AI_SYSTEM_FAULT>
- <cls:CX_XMS_SYSERR_PROXY id="o55">
- <CX_ROOT>
<TEXTID>3F829CAF9A45633CE10000000A155117</TEXTID>
<PREVIOUS />
<KERNEL_ERRID />
- <INTERNAL_SOURCE_POS>
<PROGID>0</PROGID>
<CONTID>0</CONTID>
</INTERNAL_SOURCE_POS>
</CX_ROOT>
<CX_STATIC_CHECK />
- <CX_XMS_SYSTEM_ERROR>
<ID>ERROR_WEBSERVICE_RUNTIME_INIT</ID>
<P1>Error when initializing SOAP client application</P1>
<P2 />
<P3 />
<P4 />
<INFO />
<CATEGORY>XIProxy</CATEGORY>
<AREA>ABAP</AREA>
<RETRY>M</RETRY>
</CX_XMS_SYSTEM_ERROR>
- <CX_XMS_SYSERR_PROXY>
<CO_AREA_ABAP>ABAP</CO_AREA_ABAP>
</CX_XMS_SYSERR_PROXY>
</cls:CX_XMS_SYSERR_PROXY>
</asx:heap>
</asx:abap>}
This is what i have given in LPCONFIG Tcode
LPCONFIG->General setting-> Call parameters->
URL->http://webservices.daehosting.com/services/isbnservice.wso?WSDL
Please help out what I am missing here
Thanks
Krishna

I had the same error, while implementing a new client webservice.
The Error ERROR_WEBSERVICE_RUNTIME_INIT was in my case solved by:
1. regenerating the CL_SOAP_APPLICATION_CLIENT class.
and
2. deleting the LPCONFIG setting and creating a new one.
Edwin.

Have a problem with Lightroom 5.4. Since the program crashed yesterday it won't launch, it comes up with the message "Lightroom encountered an error when reading its preview cache and needs to quit". " Lightroom will attempt to fix this problem net ti

Have a problem with Lightroom 5.4. Since the program crashed yesterday it won't launch, it comes up with the message "Lightroom encountered an error when reading its preview cache and needs to quit". " Lightroom will attempt to fix this problem next time it launches". Except that it doesn't, I keep getting the same message and the program closes. Does anyone know what I can do to repair it? Can't back up, can't do anything.

There are dozens of threads in this forum that describe the fix

Can not launch lightroom says error when reading its preview cache

I can not launch Lightroom is puts up a error message that says it encountered an error when reading its preview cache and goes in to a loop that keeps closing the program
I have restarted my comp 4 times same this each time
I can't find any trouble shooting and when I try and download lightroom again it just puts me back at the creative cloud desktop which I can't click in anything

You need to delete the preview cache. LR will automatically create new previews.
Read here and here are the locations. Don't touch the *.lrcat file.

"Error when interpreting the runtime repository" BSP Component workbench

Hello,
I have enhance the Component BP_HEAD_SEARCH under some enhancement set in my development system. After transporting all my changes to Quality system, when checking the same development in BSP_WD_CMPWB it is showing an error -- "Error when interpreting the runtime repository" for the same component and enhancement set.
I have copied the repository.xml file from the development and again transported it to Quality system, even then the same error is coming.
Could anyone please suggest how to remove it Quality system, the error is not coming in Development system.
Regards,
Shobhit Srivastava

Hi Pankaj,
Try as above said
find the enhancement Z_* bsp application ,compare it with SAP bsp application.
if the XML file lost,
add the xml file toZ_* BSP application..
If it doesnt work leave it as it is.It will not affect your system.In our system also there is a same error .
Have a nice time!!!!!!!!!

Error when interpreting the runtime repository Message no. BSP_WD_TOOLS030

Hi All,
I have created an enhancement for ICWC component ICCMP_BP_DETAIL.
While trying to diplay this using trn BSP_WD_CMPWB , I am getting the message
Error when interpreting the runtime repository Message no. BSP_WD_TOOLS030.
What is the reason behind this? Also while testing this application the web page that
opens up remains blank...
Can anybody help me out with this?
thanks
Juhi Kulshreshtha

Juhi,
I meant Re: Error while loading the runtime repository in transaction BSP_WD_CMPWB
check it out.
Regards,
Amar.

"Error when interpreting the runtime repository" for IUICOBJD component

Hello experts,
I create an enhancement set for IUICOBJD component, and the systems return my the error:
"Error when interpreting the runtime repository"
Then in ICWEB, this enhancement affect to the view connectionObject. And this view doesn't appear.
Someone had some problems to create an enhancement set for IUICOBJD component ??
Is necesary to make somenthing with IUICOBJ component before to create the enhancement for IUICOBJD.
Could you tell me the steps to solve this??
Thanks in advance.
Best regards.

Hello Ismail, thanks for you help, I have tried to make this and the repository is the same code.
Do you know if is necesary to make something special to create an enhancement for IUICOBJD component ?? make something first with IUICOBJ and then with IUICOBJD???
I haven't any problems with other components for example with IUICMD the enhancement run ok.
Thanks in advance.
Best regards.

Cache not updated on Value Mapping Replication PI 7.1

Hi,
I already configure an scenario to do Value Mapping Replication on PI 7.1
I am sending the xml file thru an HTTP client and it seems to go all the way down. I have a "Processed Successfully" status in the moni but the thing is that I can not see any difference in the Cache at the RWB.
My receiver agreement uses the ValueMappingReplication interface to a CC of type XI.
Any ideas on what could be wrong?
Thanks in advance.
Luis

Hi Udo,
Your reply pointed me to the right direction.
In the RWB I found out that my group-id was in the wrong format, so to be sure, I used a function module called /OSP/GET_GUID. That way I generate a correct 32-bit group-id.
Now it works.
Thanks.
Luis.

Error - 403 - Value mapping replication - not authorized

Hello Experts,
I tried to implement the value mapping replication in PI 7.1as per the below article.
"http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e07dd2ae-f783-2c10-9aa6-ca69f67dd20f"
As given in the article i have configured everything in Integration Directory.
I have tried the same thing but getting the following error in "call adapter step" after sending the XML from soap client.
"<b>&nbsp;&nbsp;You are not authorized to view the requested resource.</b>"
I am able to find 2 error messages in SXMB_MONI.
i think this is an issue with user details in XI channels.
Please let me know what is the issue,user we have to give in XI receiver channel andwhat ROLE one should have to test the scenario.
Many thanks.
Regards,
Harish

Hi Hareesh,
Can you try to use the RFC/ communication user in the communication channel and try?
Please check the authentication type also, check if you will require non-sap type or sap type.
Thanks,
Hetal

Error when calling SOAP Runtime functions

Hi Guys,
I have a requirement in which i have to consume a webservice and get a response from it but when i consumed the web service and tried to test it i got the below error please let me know solution for this as it is very urgent and also i am very new to web services stuff
Error when calling SOAP Runtime functions: SRT: Processing error in Internet Communication Framework: ("ICF Error when receiving the response: ICM_HTTP_CONNECTION_FAILED")
Thanks
shivraj

Hi,
Have a look at this blog from Michal Krawczyk to find a solution:
The specified item was not found.
Hope this helps,
Grzegorz

Error when hitting PI runtime cache - Value Mapping Replication

Similar Messages

Maybe you are looking for