Error when I try to "test connection " in JCO destination
com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscapeException: Error while obtaining JCO connection.
we made entry in services file, the logon groups are existing,
is there any solution to rectify this error
Thanks in Advance,
Murali.M
Hi
Please check if you are able to login to SAP R/3 first. Second when you are creating the
JCO connections ensure that you give the password to connect to SAP in capital letters. There was a problem in SP11. Just check if that is the problem.
Ensure that you have the following completed.
1. You have added the entry in the services file and restarted your SLD
2. In Visual Administrator you have configured the SLD data supplier to point to your SLD.
3. Created the system in SLD with the correct information.
4. Then when you create the JCO connections check if you are giving teh password in caps just for correctness.
Moreover the entires for logon group and System name should be picked up from SLD. You should have configured the system in SLD. just check if it has been done properly. If it is just restart the server just in case.
You should then be able to see the values in the dropdown when you create a JCO connection.
Also remember that WD_MODELDATA_DEST should be Application data and WD_RFC_METADATA_DEST should be Dictionary Data.
If you have done all the steps and still face the error do let me know.
Hope that helps you.
regards
Ravi
Similar Messages
-
I try to "test connection " in JCO destination
com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscapeException: Error while obtaining JCO connection.
what's wrong with it?Hi Hua,
Check following links to configure SLD.
Re: Configuration of SLD
SLD
Regards,
Bhavik -
My 2nd generation ipod touch is giving me the following error when I try accessing Itunes or the app store. "Cannot connect to the Store. A secure connection could not be established. Please check your date & time settings" I am on a secure networkl.
Can't connect to the iTunes Store
Make sure that time zone is correct in addition to date and time -
"Unauthorized Host" error when you try to connect to the admin server
"Unauthorized Host" error when you try to connect to the admin server
<p>
If you see this error message when you try to connect to a Netscape
administration server:<P>
Internal Error
The administration server was unable to fulfill your request.
Reason: Unauthorized host
--------------------------<P>
Here is how to solve the problem and gain access. First you should
temporarily open access to all sites, and then once you make sure that
this lets you get into your administration server, try again to set up
the domain name or IP address access restrictions you want.<P>
For all 2.x/3.x Netscape servers on Windows NT and Unix, or for Commerce and
Communications servers (1.x) on Unix:<P>
<OL>
<LI>Open the "ns-admin.conf" file with a text editor. You can
find this file in the "admserv" directory under your Netscape
server root. The directory is named "admin-serv" in 3.x servers.<P>
<LI>Delete the "Hosts" and "Addresses" lines you see there (either one
of them might not be present). Don't confuse the "Addresses" line,
which you should delete, with the "Address" line, which you should NOT
delete.<P>
<LI>Save the file, then restart your administration server (on Unix run
"stop-admin" then "start-admin"; on Windows NT go into the Services
control panel and stop/start the "Netscape Admin Server" service).<P>
</OL><P>
For Commerce Server or Communications Server (1.x) on Windows NT:<P>
<OL>
<LI>Go into the registry editor. On Windows NT 4.0, run the command
"regedit". On Windows 3.51, run the command
"regedt32".<P>
<LI>Navigate down to the section
"HKEY_LOCAL_MACHINE\SOFTWARE\Netscape\Administration".<P>
<LI>Delete the "Hosts" and "Addresses" entries you see there (either one
of them might not be present). Don't confuse the "Addresses" entry,
which you should delete, with the "Address" entry, which you should NOT
delete.<P>
<LI>Close the registry editor, then restart your administration server
by going into the Services control panel and stopping then starting the
"Netscape Administration" service.<P>
</OL>
Now try again to access your administration server. Remember, the URL
will be something like "http://servername:12345/", where
"12345" is where the administration server's port number goes.<P>
If you still get the same "Unauthorized host" error, then make sure that
your "ns-admin.conf" file really doesn't contain any "Hosts" or
"Addresses" lines any more, and try stopping your administration server
again then starting it back up.<P>
Once you have access to your administration server, you can try again to
set up the access controls you want.<P>
<UL>
<LI>For the administration server on a 3.x server installation, select
"Admin Preferences" from the General Administration page (the first page
you see when you connect to the admin server), then click on "Superuser Access
Control" and enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the subsrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that
your DNS can resolve those hostnames -- it's generally safer to stick
with IP address restrictions. When you're finished configuring this,
click "OK" then restart your admin server.<P>
<LI>For the administration server on a 2.x server installation, select
"Configure Administration" from the Server Selector page (the first page
you see when you connect to the admin server), then click on "Access
Control" and enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the subsrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that
your DNS can resolve those hostnames -- it's generally safer to stick
with IP address restrictions. When you're finished configuring this,
click "OK" then restart your admin server.<P>
<LI>For the administration server on a 1.x server installation, select
"Configure Administration Server" from the bottom of the Server Manager
page, then enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the substrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that your
DNS can resolve those hostnames -- it's generally safer to stick with IP address
restrictions.
When you're finished configuring this, click "Make These Changes" then
restart your admin server.<P>
</UL><P>
If you still find yourself getting an "Unauthorized host" error message,
you can use the above steps to open up access and try different
settings.<P>"Unauthorized Host" error when you try to connect to the admin server
<p>
If you see this error message when you try to connect to a Netscape
administration server:<P>
Internal Error
The administration server was unable to fulfill your request.
Reason: Unauthorized host
--------------------------<P>
Here is how to solve the problem and gain access. First you should
temporarily open access to all sites, and then once you make sure that
this lets you get into your administration server, try again to set up
the domain name or IP address access restrictions you want.<P>
For all 2.x/3.x Netscape servers on Windows NT and Unix, or for Commerce and
Communications servers (1.x) on Unix:<P>
<OL>
<LI>Open the "ns-admin.conf" file with a text editor. You can
find this file in the "admserv" directory under your Netscape
server root. The directory is named "admin-serv" in 3.x servers.<P>
<LI>Delete the "Hosts" and "Addresses" lines you see there (either one
of them might not be present). Don't confuse the "Addresses" line,
which you should delete, with the "Address" line, which you should NOT
delete.<P>
<LI>Save the file, then restart your administration server (on Unix run
"stop-admin" then "start-admin"; on Windows NT go into the Services
control panel and stop/start the "Netscape Admin Server" service).<P>
</OL><P>
For Commerce Server or Communications Server (1.x) on Windows NT:<P>
<OL>
<LI>Go into the registry editor. On Windows NT 4.0, run the command
"regedit". On Windows 3.51, run the command
"regedt32".<P>
<LI>Navigate down to the section
"HKEY_LOCAL_MACHINE\SOFTWARE\Netscape\Administration".<P>
<LI>Delete the "Hosts" and "Addresses" entries you see there (either one
of them might not be present). Don't confuse the "Addresses" entry,
which you should delete, with the "Address" entry, which you should NOT
delete.<P>
<LI>Close the registry editor, then restart your administration server
by going into the Services control panel and stopping then starting the
"Netscape Administration" service.<P>
</OL>
Now try again to access your administration server. Remember, the URL
will be something like "http://servername:12345/", where
"12345" is where the administration server's port number goes.<P>
If you still get the same "Unauthorized host" error, then make sure that
your "ns-admin.conf" file really doesn't contain any "Hosts" or
"Addresses" lines any more, and try stopping your administration server
again then starting it back up.<P>
Once you have access to your administration server, you can try again to
set up the access controls you want.<P>
<UL>
<LI>For the administration server on a 3.x server installation, select
"Admin Preferences" from the General Administration page (the first page
you see when you connect to the admin server), then click on "Superuser Access
Control" and enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the subsrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that
your DNS can resolve those hostnames -- it's generally safer to stick
with IP address restrictions. When you're finished configuring this,
click "OK" then restart your admin server.<P>
<LI>For the administration server on a 2.x server installation, select
"Configure Administration" from the Server Selector page (the first page
you see when you connect to the admin server), then click on "Access
Control" and enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the subsrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that
your DNS can resolve those hostnames -- it's generally safer to stick
with IP address restrictions. When you're finished configuring this,
click "OK" then restart your admin server.<P>
<LI>For the administration server on a 1.x server installation, select
"Configure Administration Server" from the bottom of the Server Manager
page, then enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the substrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that your
DNS can resolve those hostnames -- it's generally safer to stick with IP address
restrictions.
When you're finished configuring this, click "Make These Changes" then
restart your admin server.<P>
</UL><P>
If you still find yourself getting an "Unauthorized host" error message,
you can use the above steps to open up access and try different
settings.<P> -
"Unable to connect to server" I have wifi connection but I'm getting this error when I try to purchase an app. Why? If anyone knows can you please help me thank you in advance. :-(
Can you load a webpage in Safari with that wifi connection? If so then it's a problem with the iTunes Store app connection. If not then your wifi isn't fully functional and you need to troubleshoot that first.
-
HT5622 I have a connection error when I try to sign on to icloud, what is wrong?
I have a connection error when I try to sign on to icloud, what is wrong? My phone is stolen and I'm trying to track it. Icloud was working fine earlier today. Help anybody please!
If you are getting this error when trying to use icloud.com on a computer, follow these steps.
-
Helpme I have error when I try connect from struts to web service
helpme I have error when I try connect from struts to web service using basic authentication . the error message is
[SOAP Exception: fault code= SOAP-ENV Protocol; msg=Unsupported response content type "text/html" must be "text/xml"; ] Response was <html><body> 401 Unauthorized </body></html>
I'm not using ldap for authentication only xml (jazx-data.xml) ... I already create user with jazn.jar for that user , and I dont know why it still error like that ..
Please helpme I don't have anytime more to find the mistake , ??
I'm using Jdeveloper 9i , and oc4j 9.0.4 Server (Not embedded with Jdev)
But when I use with sample java client it success .....
then I try with Struts the response is unsupported response content type text/html must be text/xml response was 401 Unauthorized1.The reason why this error occurs is, we are getting non SOAP response when the program is expecting a SOAP response. Did you set the proxy server correctly? Try to handle the exception and see the content type of the response in your program.
2. While creating the client stub u must check an option for authentication for webservice .should solve ur problem.
thanks
sirisha -
I get the following error when I try to import a DB from my machine (9.2) to a 8.1.7.4 Unix (Sol 2.8) box. I can import locally on my 9.1 fine. Anyone hab=ve any ideas?
Thanks
Here is the message:
Import: Release 9.2.0.1.0 - Production on Wed Feb 5 07:46:50 2003
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to: Oracle8i Enterprise Edition Release 8.1.7.4.0 - Production
With the Partitioning option
JServer Release 8.1.7.4.0 - Production
IMP-00003: ORACLE error 942 encountered
ORA-00942: table or view does not exist
IMP-00023: Import views not installed, please notify your DBA
IMP-00000: Import terminated unsuccessfullyHi,
Whenever you are exporting and importing database remember following rules;
1. The Import utility and the database to which data is being imported (the target database) must be the same version.
2. The version of the Export utility must be equal to the lowest version of the source or target database.
Good luck. :)
-San -
Why am I getting an ORA-04052 error when I try to compile a Procedure?
Hi,
The following procedure I'm getting an ORA-04052 error when I try to compile the following procedure.
CREATE OR REPLACE PROCEDURE APPS.Find_String (
pin_referenced_name IN dba_dependencies.referenced_name%TYPE)
IS
cursor cur_get_dependancy
is
SELECT distinct owner, name, type
FROM [email protected] -- prod.world
WHERE lower(referenced_name) = lower(pin_referenced_name) --'ftbv_salesrep_all_1d'
AND referenced_type <> 'SYNONYM'
AND owner <> 'SYS'
order by name;
v_owner varchar2(40);
v_name varchar2(50);
v_type varchar2(40);
BEGIN
dbms_output.put_line(upper(pin_referenced_name)||' is found in the following objects.');
dbms_output.put_line(' ');
dbms_output.put_line(RPAD('OWNER', 30, ' ')||RPAD('NAME', 60, ' ')||RPAD('OBJECT TYPE', 30, ' '));
dbms_output.put_line('-------------------------------------------------------------------------------------------------------------------');
FOR i IN cur_get_dependancy
LOOP
v_owner := RPAD(i.owner, 30, ' ');
v_name := RPAD(i.name, 45, ' ');
v_type := RPAD(i.type, 30, ' ');
dbms_output.put_line(v_owner ||v_name|| v_type);
END LOOP;
END find_string;I'm using the link [email protected]. The procedure compiles for other database links used in the cursor including the one commented to the right of the code 'prod.world'.
What's even stranger is that I took the SELECT statement
SELECT distinct owner, name, type
FROM [email protected] -- prod.world
WHERE lower(referenced_name) = lower(pin_referenced_name) --'ftbv_salesrep_all_1d'
AND referenced_type <> 'SYNONYM'
AND owner <> 'SYS'
order by name;out of the procedure and ran it on the command line using the @pinp.world link, the SQL statement ran just fine. But when I tried to compile the above procedure with that exact same SQL statement with the exact same link I get the following string of errors.
ORA-04052: error occurred when looking up remote object [email protected]
ORA-00604: error occurred at recursive SQL level 1
ORA-02068: following severe error from PINP
ORA-03113: end-of-file on communication channelHow can the link work just fine in a regular SQL statement but then cause an error when its compiled in code that otherwise compile just fine when using any other link or even just a plain database. Does anyone have any suggestions?OK Justin,
Here's the query by itself run in another database using the @pinp.world link and querying the dba_dependencies table in the pinp.world database. As you can see the query using this link works just fine returning the requested rows. I can't figure out why the compiler is having an issue with essentially this same query when I try to compile it in a cursor in TOAD. Also this is the database (dev1.world) that I'm trying to compile this Procedure in.
By the way I'm in an Oracle 9.2.0.6 database and TOAD v9.2.
SQL> conn apps/apps1@dev1
Connected.
SQL> SELECT distinct owner, name, type
2 FROM [email protected]
3 WHERE lower(referenced_name) = lower('ALL_USERS')
4 AND referenced_type <> 'SYNONYM'
5 AND owner <> 'SYS'
6 order by name;
OWNER NAME TYPE
PUBLIC ALL_USERS SYNONYM
XDB DBMS_XDBUTIL_INT PACKAGE BODY
XDB DBMS_XDBZ0 PACKAGE BODY
SYSTEM MVIEW_EVALUATIONS VIEW
SYSTEM MVIEW_EXCEPTIONS VIEW
SYSTEM MVIEW_FILTER VIEW
SYSTEM MVIEW_LOG VIEW
SYSTEM MVIEW_RECOMMENDATIONS VIEW
SYSTEM MVIEW_WORKLOAD VIEW
ORASSO WWCTX_API PACKAGE BODY
PORTAL WWCTX_API PACKAGE BODY
ORASSO WWEXP_UTL PACKAGE BODY
PORTAL WWEXP_UTL PACKAGE BODY
PORTAL WWPOB_API_PAGE PACKAGE BODY
PORTAL WWPOF PACKAGE BODY
ORASSO WWPRO_PROVIDER_VALIDATION PACKAGE BODY
PORTAL WWPRO_PROVIDER_VALIDATION PACKAGE BODY
PORTAL WWSBR_EDIT_ATTRIBUTE PACKAGE BODY
PORTAL WWSBR_FOLDER_PORTLET PACKAGE BODY
PORTAL WWSBR_USER_PAGES_PORTLET PACKAGE BODY
ORASSO WWUTL_API_PARSE PACKAGE BODY
OWNER NAME TYPE
PORTAL WWUTL_API_PARSE PACKAGE BODY
PORTAL WWUTL_EXPORT_IMPORT_LOV PACKAGE BODY
ORASSO WWUTL_LOV PACKAGE BODY
PORTAL WWUTL_LOV PACKAGE BODY
PORTAL WWV_CONTEXT PACKAGE BODY
PORTAL WWV_CONTEXT_UTIL PACKAGE BODY
PORTAL WWV_DDL PACKAGE BODY
PORTAL WWV_GENERATE_UTL PACKAGE BODY
PORTAL WWV_GLOBAL PACKAGE
PORTAL WWV_MONITOR_DATABASE PACKAGE BODY
PORTAL WWV_PARSE_AS_SPECIFIC_USER PACKAGE BODY
PORTAL WWV_PARSE_AS_USER PACKAGE BODY
PORTAL WWV_SYS_DML PACKAGE BODY
PORTAL WWV_SYS_RENDER_HIERARCHY PACKAGE BODY
PORTAL WWV_THINGSAVE PACKAGE BODY
PORTAL WWV_UTIL PACKAGE BODY
PORTAL WWV_UTLVALID PACKAGE BODY
38 rows selected.
SQL>Let me know what you think.
Thanks again. -
Get file not found error when I try to sync
I get file not found error when I try to sync Iphone.
SteveDVD,
The use of the .WMV was because that was part of the Library .EM template. I would not anticipate problems with other formats, so long as they are supported and the same for all of your Menus in the Project.
If you have done several Motion Menu Renderings, you might want to clear Encore's Media Cache, just in case it is still referencing previous Render files.
And yes, the re-Importation should yield the same result as Linking/re-Linking.
Unfortunately, I do not have CS4, so I can't test this for you. There do seem to be a few real Bugs in the various CS4 programs, and maybe this is one?
That "File Not Found" rings a bell in my feeble brain. Seems that there was a post on that, but I do not remember it being related to Motion Menus. Maybe search will yield something of use.
Good luck,
Hunt -
Error when I try to run a Journal report, Works fine in previous month
Hi,
I am getting an error when I try to run a Journal report in HFM. The report runs fine for October Month but fials in November. does anyone have any ideas what it could be. The error message details are per below
Error Reference Number: {B6DCF307-AB72-476F-9634-70E35C3E8F2F};User Name: vivek.singha@WorleyParsons
Num: 0x8004023b;Type: 0;DTime: 12/20/2010 7:42:24 PM;Svr: AUHODWRLYP9;File: CHsvDSCalcStatus.cpp;Line: 391;Ver: 9.3.1.6.2558;
Num: 0x8004023b;Type: 0;DTime: 12/20/2010 7:42:24 PM;Svr: AUHODWRLYP9;File: CHsvDSCalcStatus.cpp;Line: 7035;Ver: 9.3.1.6.2558;
Num: 0x8004023b;Type: 0;DTime: 12/20/2010 7:42:24 PM;Svr: AUHODWRLYP9;File: DataSecurity.cpp;Line: 696;Ver: 9.3.1.0.2042;
Num: 0x8004023b;Type: 0;DTime: 12/20/2010 7:42:24 PM;Svr: AUHODWRLYP9;File: DataSecurity.cpp;Line: 329;Ver: 9.3.1.0.2042;
Num: 0x8004023b;Type: 0;DTime: 12/20/2010 7:42:24 PM;Svr: AUHODWRLYP9;File: SecurityInternal.cpp;Line: 1695;Ver: 9.3.1.0.2042;
Num: 0x8004023b;Type: 0;DTime: 12/20/2010 7:42:24 PM;Svr: AUHODWRLYP9;File: CHsvJournals.cpp;Line: 1249;Ver: 9.3.1.0.2042;
Num: 0x8004023b;Type: 0;DTime: 12/20/2010 7:42:24 PM;Svr: AUHODWRLYP9;File: CHsvJournals.cpp;Line: 988;Ver: 9.3.1.0.2042;
Num: 0x8004023b;Type: 0;DTime: 12/20/2010 7:42:24 PM;Svr: AUHODWRLYP9;File: CHsvJournalsACM.cpp;Line: 1734;Ver: 9.3.1.0.1502;
Num: 0x8004023b;Type: 0;DTime: 12/20/2010 7:42:24 PM;Svr: AUHODWRLYP9;File: CHsvJournalsACM.cpp;Line: 1648;Ver: 9.3.1.0.1502;
Num: 0x8004023b;Type: 0;DTime: 12/20/2010 7:42:24 PM;Svr: AUHODWRLYP9;File: ReportGenerator_Journal.cpp;Line: 136;Ver: 9.3.1.0.2176;
Num: 0x8004023b;Type: 0;DTime: 12/20/2010 7:42:24 PM;Svr: AUHODWRLYP9;File: CHsvReportGeneratorACM.cpp;Line: 575;Ver: 9.3.1.0.2176;
Num: 0x8004023b;Type: 0;DTime: 12/20/2010 7:42:24 PM;Svr: AUHODWRLYP9;File: HFMActionsExecution.cpp;Line: 2189;Ver: 9.3.1.0.2385;
Num: 0x8004023b;Type: 0;DTime: 12/20/2010 7:42:24 PM;Svr: AUHODWRLYP9;File: HFMActions.cpp;Line: 72;Ver: 9.3.1.0.2385;
Num: 0x8004023b;Type: 0;DTime: 12/20/2010 7:42:24 PM;Svr: AUHODWRLYP9;File: HFMCESAction.cpp;Line: 28;Ver: 9.3.1.0.2385;
Num: 0x8004023b;Type: 0;DTime: 12/20/2010 7:42:25 PM;Svr: AUHODWRLYP9;File: Actions.cpp;Line: 291;Ver: 9.3.1.0.2385;
Regards
VivekHi All,
I narrowed it down by running a report excluding working journals and that worked fine.
This was being caused by an invalid working Journal. I exported all journals from Prod, and tried loading them to test. One of the errors was
"Line: 7736, Error: Invalid parent.child entity dimension specified"
Looking at the row the journal did not have an entity specified for one of the lines.
When a valid entity was specified the journal report then starts working.
Lesson. Check all journals are valid. To find error, load journals export in a different environment.
Thanks all for your help.
Regards
Vivek -
I get an error when I try to move instances of public folders.
We have exchange 2003 and exchange 2010 setup in a coexistence environment. I get an error when I try to move instances of public folders from Exchange 2003 to Exchange 2010. "Unable to create the required MAPI profile. Please verify that you have
sufficient permissions to write to the MAPISVC.INF file. ID no: c103073a Exchange system Manager." I have checked the permissions on the exchange 2003 server. I am unable to locate the MAPISVC.inf file on the exchange 2010 server. This is the last set
before we begin our move to exchange 2010 and then on to exchange 2013. Any help would be appreciated.Hi,
Do you mean you get the error like the following one?
An error occurred while trying to establish a connection to the Exchange Server. Be sure that port 443 (for ssl) or port 80 (for non-ssl) can be reached. If you are connecting to the public folders, be sure that the public store is mounted. If you are connecting
to the mailboxes and the progress bar shows particular mailbox. Be sure that the user has at least one email address.
Exception failed to connect using secure URL https://gsfcdp16es/esadmin/admin/nyu.email.gs.com/publicfolders with error.
The underlying connection was closed. Unable to connect to the remove server.
Please check if you can expand PF tree in ESM.
Please make sure SSL is disabled on /ExAdmin and /Public virtual directory. If possible, you can recreate the ExAdmin virtual directory to check result.
Best regards,
Belinda Ma
TechNet Community Support -
Error when I try to run a form
Hi,
I created a table-based form, but I get a error when I try to run it (CTRL+R):
java.lang.ClassNotFoundException: oracle.forms.engine.Main
How can I fix it?
Thanks
Savio BarrosIf you have JInitiator installed successfully that is if you are able to run the test form try this
Open the control panel of your JInitiator (double click on the JInitiator icon in windows control panel) in the Proxies tab, see if you have the Use Browser Settings check box checked.
Otherwise configure the proxy settings and test your form.
Regards,
Tony -
Error when I try to access my yahoo mailbox
I am using JavaMail for accesing my yahoo mailbox.
I get the following error when I try to access my mailbox
Exception :: javax.mail.AuthenticationFailedException: Error logging in.
Session session = Session.getInstance(properties,new Authenticator()
public PasswordAuthentication getPasswordAuthentication()
String username = getUser();
String password = getPassword();
return new PasswordAuthentication(username,password);
Store store = session.getStore("pop3");
store.connect(getPopHost(),user,password);
please any one help me.
i thinked error problem in
Store store = session.getStore("pop3");
store.connect(getPopHost(),user,password);
any of this lines.
please tell ur sugestions.
thanks in advance.try it.
public class SendMailUsingAuthentication
private static final String SMTP_HOST_NAME = "myserver.smtphost.com";
private static final String SMTP_AUTH_USER = "myusername";
private static final String SMTP_AUTH_PWD = "mypwd";
private static final String emailMsgTxt = "a message.";
private static final String emailSubjectTxt = "a subject";
private static final String emailFromAddress = "[email protected]";
// Add List of Email address to who email needs to be sent to
private static final String[] emailList = {"[email protected]", "[email protected]"};
public static void main(String args[]) throws Exception
SendMailUsingAuthentication smtpMailSender = new SendMailUsingAuthentication();
smtpMailSender.postMail( emailList, emailSubjectTxt, emailMsgTxt, emailFromAddress);
System.out.println("Sucessfully Sent mail to All Users");
public void postMail( String recipients[ ], String subject,
String message , String from) throws MessagingException
boolean debug = false;
//Set the host smtp address
Properties props = new Properties();
props.put("mail.smtp.host", SMTP_HOST_NAME);
props.put("mail.smtp.auth", "true");
Authenticator auth = new SMTPAuthenticator();
Session session = Session.getDefaultInstance(props, auth);
session.setDebug(debug);
// create a message
Message msg = new MimeMessage(session);
// set the from and to address
InternetAddress addressFrom = new InternetAddress(from);
msg.setFrom(addressFrom);
InternetAddress[] addressTo = new InternetAddress[recipients.length];
for (int i = 0; i < recipients.length; i++)
addressTo[i] = new InternetAddress(recipients);
msg.setRecipients(Message.RecipientType.TO, addressTo);
// Setting the Subject and Content Type
msg.setSubject(subject);
msg.setContent(message, "text/plain");
Transport.send(msg);
* SimpleAuthenticator is used to do simple authentication
* when the SMTP server requires it.
private class SMTPAuthenticator extends javax.mail.Authenticator
public PasswordAuthentication getPasswordAuthentication()
String username = SMTP_AUTH_USER;
String password = SMTP_AUTH_PWD;
return new PasswordAuthentication(username, password); -
Error when I clone a test plan
Hi All
I get the below error when I clone a test plan.
I've no steps or attachments in the test case mentioned below. It helps to more than one test case
clone operation encountered an error while processing test case 21428. Exclude this test case from the suites being cloned and retry the operation. Error details : Failed to parse xml in the UITest file attachment or TCM.Steps field. Make usre this data
is valid and retry the opeartion
Please let me know how to fix this issue?
ThanksHi Sathish,
Base on the error message, it seems that there are something issue in test case 21428. I suggest that you could create a new test case that similar to test case 21428 and try again.
Regards
Starain
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
Maybe you are looking for
-
N73 / PC Suite 6.82.22.0 / Restore problems
I safely backed up all my phone's data via data cable before upgrading the software on my phone (again, via data cable). All went well and the software upgrade was fine. But on restoring it only puts the multimedia data back on there. So I only have
-
JSP Weblogic server question.
Hi, I'm new with Weblogic, and I have running the server already. I'm able to run servlets through the browser, however I want to start working with JSP. I created a sample jsp file and when trying to launch it
-
Can I reference page-flow bean from a bounded-task-flow page-fragment?
I have a view activity implemented as page fragment in my bounded task flow. I declare a page-flow scope managed-bean in adfc-config.xml to do some initialization for the bounded-task-flow: <managed-bean id="__23"> <managed-bean-name id="__22">TaskFl
-
Function with select if statement query
Hi, I want to use if condition in select statement in function. But i implemented in case too ,its taking more time to return the value while using case statement. My function is like this create or replace FUNCTION GET_CODE (pv_type IN table1.type%T
-
How do I Open word document looking EXACTLY like it did when last closed?
How do I open a word document looking like it did when I closed it? In the same shape, position on screen, size etc?