Error when importing UTF8 Files into SOD

I was trying to import a UTF8 csv file into SOD (Lead Object) and I,m running into wierd errors only for some of the records. Mentioned below is the error: "An unexpected error occurred during the import of the following row".
It is basically messing the sequence of columns in the row.
Please advise.

Send me your CSV file and log file to [email protected] and I will take look at it.
Edited by: Bob B on Oct 1, 2008 9:17 AM

Similar Messages

Error when importing psd files into Premiere Pro

I am using Adobe Premiere Pro CS4 and Photoshop CS4. Whenever I attempt to import a psd file I get this error message: "File format not supported". I have tested it with different file sizes and properties. My files are RGB and 8 bits/channel. Is there any way to resolve this problem? I am also using Adobe After Effects and importing psd files works great with it.
Thanks

Welcome to the forum.
The RGB and 8-bit take care of two possible causes, so thanks for getting those out of the way early on.
Does the PSD file contain Layers? Are any of them mostly Transparent, with just a few pixels, such as a small logo? Those have created issues.
What is the exact version of CS4, that you are running? Seems that there WAS an issue with PSD's in an earlier version, and that a later update fixed that.
There is another element with PSD's, that has caused issues, but my feeble mind is suddenly blank on what that was about. Seems that Colin Brougham commented on it not that long ago. I'll see if I can drege up one of those threads, but you might aslo want to do a Search on "PrPro" and "PSD," though the forum Search might still be broken. Maybe Google, and also look for replies from Colin. I'll do the same too. IIRC, one had to Open the offending PSD in PS, and just do a Save_As with a short file name, and a short Path (not buried deeply inside a sub-folder structure), and all was good, but do not recall any other details at the moment. I would also eliminate any spaces in the new file name, just to eliminate any issue there - use the _ like in the old DOS days, though do not think that one had to adhere to the old 8.3 structure.
Good luck,
Hunt

Error while importing tpz file into XI Design

Hi All,
When i am trying to import latest exported tpz file from Dev system into Q system i am getting below error.
Also the tpz file i am importing , with same file name already i have imported earlier into Q system through other Dev system. Now i am importing the exported file through prod fix environment dev system. Please help me , how to import the file without this error. Also, how to avaoid duplicate file name for importing tpz files or overwrite exiting imported tpz file which is having same file name.
Batch rolled back. Caused by java.sql.BatchUpdateException: ORA-00001: unique constraint (SAPSR3DB.SYS_C00136623) violated at oracle.jdbc.driver.DatabaseError.throwBatchUpdateException(DatabaseError.java:343) at oracle.jdbc.driver.OraclePreparedStatement.executeBatch(OraclePreparedStatement.java:10698) at com.sap.sql.jdbc.basic.BasicPreparedStatement.executeBatch(BasicPreparedStatement.java:263) at com.sap.sql.jdbc.oracle.Oracle10gPreparedStatement.executeBatch(Oracle10gPreparedStatement.java:100) at com.sap.sql.jdbc.direct.DirectPreparedStatement.executeBatch(DirectPreparedStatement.java:1129) at com.sap.sql.jdbc.common.CommonPreparedStatement.executeBatch(CommonPreparedStatement.java:991) at com.sap.engine.services.dbpool.wrappers.StatementWrapper.executeBatch(StatementWrapper.java:270) at com.tssap.dtr.pvc.basics.transaction.StatementReleasingConnection.executeBatch(StatementReleasingConnection.java:297) at com.tssap.dtr.pvc.versionmg.DefaultIntegrator.fireSQLBatches(DefaultIntegrator.java:1072) at com.tssap.dtr.pvc.versionmg.DefaultIntegrator.executeDBUpdates(DefaultIntegrator.java:384) at com.tssap.dtr.pvc.versionmg.DefaultIntegrator.integrate(DefaultIntegrator.java:337) at com.tssap.dtr.pvc.versionmg.VersionSet.integrate(VersionSet.java:183) at com.sap.aii.ib.server.pvcadapt.ImmutableVersionSet.integrate(ImmutableVersionSet.java:197) at com.sap.aii.ib.server.versioning.integration.VersionSetIntegratorImpl._integrateUnconditionally(VersionSetIntegratorImpl.java:300) at com.sap.aii.ib.server.versioning.integration.VersionSetIntegratorImpl.integrateClosedVersionSet(VersionSetIntegratorImpl.java:119) at com.sap.aii.ib.server.versioning.integration.VersionSetIntegrator.integrateClosedVersionSet(VersionSetIntegrator.java:52) at com.sap.aii.ib.server.propagation.PropagatorImpl.integrateObjectVersions(PropagatorImpl.java:261) at com.sap.aii.ib.server.propagation.Propagator.integrateObjectVersions(Propagator.java:174) at com.sap.aii.ib.server.transport.impl.pvc.PvcTransport.pvcIntegrate(PvcTransport.java:191) at com.sap.aii.ib.server.transport.impl.service.InternalTransportServiceImpl.integrateVersionset(InternalTransportServiceImpl.java:480) at com.sap.aii.ibrep.server.transport.impl.service.InternalRepTransportServiceImpl.autoIntegrate(InternalRepTransportServiceImpl.java:546) at com.sap.aii.ib.server.transport.impl.service.InternalTransportServiceImpl.importZippedStream(InternalTransportServiceImpl.java:716) at com.sap.aii.ib.server.transport.impl.service.InternalTransportServiceImpl.importFromImportSource(InternalTransportServiceImpl.java:362) at com.sap.aii.ib.server.transport.impl.service.TransportServiceImpl.importFromImportSource(TransportServiceImpl.java:151) at com.sap.aii.ib.sbeans.transport.TransportServiceBean.importFromImportSource(TransportServiceBean.java:75) at com.sap.aii.ib.sbeans.transport.TransportServiceRemoteObjectImpl1_0.importFromImportSource(TransportServiceRemoteObjectImpl1_0.java:730) at com.sap.aii.ib.sbeans.transport.TransportServiceRemoteObjectImpl1_0p4_Skel.dispatch(TransportServiceRemoteObjectImpl1_0p4_Skel.java:100) at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:312) at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:199)
at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Thanks in advance.
Rajesh
Edited by: rajesh amrabad on Sep 11, 2008 10:35 PM

In addition to abobe answers,
Keep this .tpz file at below mentioned location
\usr\sap\<SID>\SYS\global\xi\repository_server\import\XI7_0_SAP_BASIS_7.00_09_00.tpz
then login to the IR and peoceed as Tools -
> import design objects. Her you will get this .tpz file, just import it.
follow the steps given in this link and check if you are doing the correct thing.
http://help.sap.com/saphelp_nw04/helpdata/en/93/a3a74046033913e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content.htm
The steps that you require are listed below,
1) You must have the role SAP_XI_ADMINISTRATOR or SAP_XI_CONTENT_ORGANIZER to be able to export and import XI content.
2)You import the XI content by first copying the provided export files into an import directory on the host of the Integration Builder and then importing the files into the Integration Repository.
3)Copy the export files into the import directory for the Integration Repository (<systemDir>\xi\repository_server\import).If the files are packed, you must unpack them before importing.The actual export files have the extension .tpz. You must not unpack these files.
4)The import directory is created the first time you call the Integration Builder.
5)Start the Integration Builder and call the Integration Repository.
To do this, perform the following steps:
a. Log on to the SAP system on which your Integration Builder has been installed.
b. Open the Integration Builder start page by calling it either from your user menu or with Transaction SXMB_IFR.
c. Choose Integration Repository.
Choose Tools u00AE Import design objects to import the XI content.
6)Only the files from the import directory are offered to be imported. The sequence in which
you import the export files is not important.
7)After a successful import, the Integration Builder moves the imported TPZ files into the directory <systemDir>/xi/repository_server/importedFiles. The support package stack of imported software component versions is displayed on the Details tab page for the relevant software component version in the Integration Builder. If an error occurs, this information is important for support.
Hope i have been of some help.

Import error when importing .psd file created in Photoshop CS3

I have a file that was created in Photoshop CS3. I am trying to import this file into Catalyst CS5, but I keep getting an input error. I created a file in Photoshop CS5 and I was able to import this .psd file successfully into catalyst. So I guess my question is this; Does Catalyst support .psd files created in Photoshop CS5 only? If this is the case, how can I convert the CS3 .psd to a CS5 .psd

I am now building my files using photoshop CS5. A few challenges I have experienced while trying to import into Catalyst:
- If I do a straight import into Catalyst, I loose all my colors in Catalyst. That is, catalyst imports all my vectors without any of the colors I had in Photoshop. My understanding is that Catalyst has libraries to support Photoshop files, so your import from Photoshop should not look any different in Catalyst.
Work Around: I have had to rasterize / merged all my image layers for the different components I have built in Photoshop CS5. Then when I start the import process I click the Advanced button on the catalyst import dialog. From the advanced dialog, I have to flatten (to bitmap) all the images I intend to import.
This process takes about two hours because I have a lot of components on the page.
Is there something I'm not doing right here? I'm not seeing the value add to Catalyst, if it's taking me this long to just import .psd files

No sound when importing MTS files into Premiere Pro?

Hey guys, I'm editing a film for my Drama Assessment at school. I used a Canon HD Camcorder which saves files as .MTS extension. My problem is that when i import the files into Premiere Pro CS5 there appears to be no sound???? CAN ANYONE HELP ME PLEASE!!!

if you can hear the audio with media player or with any other player in your computer then check settings
EDIT--PREFERENCES--AUDIO HARDWARE AND CLICK ON ASIO SETTINGS.
another dialog box will appear and in that under
INPUT AND OUTPUT TAB
MAKE SURE ALL THE OPTIONS/BOXES SHOULD BE CHECKED .
DO NOT FORGET TO UPDATE TO 5.0.3

File error when importing .mp4 files

Hi there,
I have a problem concerning importing files.
I had some .mkv files, which I converted to .mp4 files with just 1 audio track and no subtitles using Handbrake.
Problem is, I can't import these files into Final Cut Pro 7.
It gives the following error:
"File error: 1 file(s) recognized, 0 access denied, 1 unknown."
I have no problem importing .avi files, or .mp4 files that haven't been converted.
Does anyone know what I should do? I don't know any other program to convert .mkv files, so basically, I'm bound to using Handbrake.
Thanks in advance!!

I didn't know Handbrake was such a bad tool.
I never did much video-editing before, so I usually used iMovie, and the Handbrake-converted files worked fine with that.
And I did what you said, I converted the video to .mov with MPEG Streamclip, using the mentioned presets, but now I have another problem.
A 22 minute file, which was 360MB before converting, turned into a 6.2GB file after converting.
Since I use videoclips from a TV Serie, which has over 60 episodes, this is going to cost a lot of space. Is there any way to reduce the filesize without destroying the video quality, or is there any, ANY, way to make FCP accept .mp4 files?
I don't care if it slows down my Mac or anything, it's just that I know it's possible, with the 700MB file from one of my posts above.

Trouble getting audio files when importing R3D files into CS5.5 Prem Pro

Importing R3D files into Premiere Pro CS5.5 works for Video but the audio doesn't convert properly.   There is an audio file included in the R3D file that PP can see but it just has a few spikes.
This same file played in REDcine-X plays the video/audio just fine.   Is there some audio setting in Premiere Pro that I should be setting?
Oddly enough if I use REDcine-X to output a RED Trim file and then import it into PP, the audio file is shown separately and is imported correctly.   This of course involves a file conversion step in the workflow and a step that we are hoping to avoid.

In order to import all kinds of r3d, we had better convert it to adobe more compaitble video format like dv, mpeg, avi
You may refer to the following step by step guide on how to convert .r3d movies at Convert R3D to ProRes, MOV, AVI, MP4, WMV, 3GP, MKV
The guide applies to:
Convert R3D to ProRes 4444, 422, 422 (HQ), 422 (LT), and 422 (Proxy) to fast import any version of Final Cut Pro or Final Cut Pro X.
Convert R3D to MOV, MP4 to import R3D to iMovie for easy editing or to play R3D in QuickTime, iTunes, iPad, iPod, iPhone, Apple TV.
Convert R3D to AVI, WMV, MPG to edit R3D in Avid, Adobe Premiere, Sony Vegas, Windows Movie Maker or play R3D in Windows Media player, Xbox 360, Microsoft Surface.
Convert R3D to FLV, WebM, H.264, MP4 for upload R3D video files to YouTube
Convert R3D to DV, VOB, ASF, SWF, RM, 3GP, OGV, FLAC, OGG, MP3, WAV, WMA, AC3, AIFF, WMA and etc.

Getting error while importing CRDelta file into SLD

When we are applying SAP Note 669669 - Importing delta in SLD we are getting the below mentioned error message.
"The selected aggregate import is not applicable to the current version SAP_CR2.0 of the target namespace"
We are trying to import the zip file CRDelta1511_0-10004549.ZIP.
However we were successfully able to import the cimsap1511_0-10004549.zip into the SLD successfully.
We are doing this import activity (upgrading the SLD) as we are unable to locate the ESS related mandatory Software Component EP_BUILDT in the current SLD version.
Waiting for a quick response
Regards,
Narpal

Hello Sihag,
No matter what product version we choose it throws the same error.
But when I give Integration process(in the same software component where the integration scenario) for the application component and then creating it works.
Afterwards I removed the integration process from application system, and its not throwing any error when i check (F7) in Integration scenario.
907897 - Check this before you import
Before you upgrade to the model version 1.5, check which version is currently imported in the SLD Web UI (Administration -> Details). If the current version is lower than 1.4.30, import model 1.4.x (x must be 30 or higher) before updating to model version 1.5. You can find this version on SAP Service marketplace under SAP MASTER DATA FOR SLD 2.0, "SAP CIM model 1.4 Support Package 08". Version Support Package 18 already contains the data for the conversion to Version 1.5.
Do let me know if your problem is getting resolved.
Thank you.
Regards,
Manomeet
- Award points if helpful -

Header Error when importing Wav files

The problem I'm experiencing is that Premiere CS6 will not import my Wav audio files. When I try to import them it gives the following message and fails to import the file:
"The file cannot be opened because of a header error".
The original audio file, which opened happily in FCP 7 (I'm migrating the project to Premiere from a previous Final Cut Pro project) is in the following format (as described in the Movie Inspector of QuickTime Player):
Linear PCM
16 bit little-endian signed integer
2 channels
48000 Hz
Although the files won't open in Premiere, they will open in Adobe Audition, which gives their bit depth as 32 (it also describes the original format as "16 bit little-endian" - I confess that this technical side of sound files is unclear to me).
Any suggestions of how I can coax Premiere into importing and opening these files?
Thanks, Andrew

Perhaps some of the suggestions in this thread: http://forums.adobe.com/message/4713932#4713932 will be helpful?
Good luck,
Hunt

Illegal combination when importing xml file into xmltype column

I have the following control file.
LOAD DATA
CHARACTERSET UTF8
INFILE *
INTO TABLE IMPORTRAWXML TRUNCATE
SITEID constant 0
,VENDORID constant 17
,SITEFORMATID constant 2
,"\\plutonium\outcomes\AHA GWTG-Outpatient\Programs\DataTransfer\LoadTest\V17_standard_test.xml" filler char(1000)
,RAWDATA LOBFILE ("\\plutonium\outcomes\AHA GWTG-Outpatient\Programs\DataTransfer\LoadTest\V17_standard_test.xml")
TERMINATED BY EOF
)When I run it using sqlldr command line I get the following error:
SQL*Loader-350: Syntax error at line 1.
Illegal combination of non-alphanumeric characters
<?xml version="1.0" encoding="ISO-8859-1"?>Does anyone have any idea what I am doing wrong here? If I remove the fully resolved path (both the control file and xml file are in the same folder) it tells me it can't find the file to load.
HELP!!!!
Thanks,
Eva

evaleah wrote:
I have made sure all my home settings are correct in my registry editor and they are. Another thing to note is the control file I am using works 100% perfectly, beautifully when called from Toad for Oracle. It is when called from the command line utility that it fails. Is there anyway to determine what the difference could be?
So we know that I can work (toad works), but it doesn't yet work in a "cmd" environment.
Just as any other program Toad is also a client and uses NLS and other environment settings. Maybe these are stored in the registry, maybe the are being set by Toad by reading a configuration file while it is started or while running.
As said, on Windows its tricky...
Setting properties in the registry will not mean that they are the same a "cmd" window or maybe not even been set.
If you execute / run "cmd" then the "set" statement/command will output the environment settings that will be used during the livetime of that "cmd" session.
C:/> setIn my laptop environment (windows 7 64 bit) it will show the following
C:\>set
ALLUSERSPROFILE=C:\ProgramData
APPDATA=C:\Users\marco\AppData\Roaming
CommonProgramFiles=C:\Program Files\Common Files
CommonProgramFiles(x86)=C:\Program Files (x86)\Common Files
CommonProgramW6432=C:\Program Files\Common Files
COMPUTERNAME=00-00-000
ComSpec=C:\Windows\system32\cmd.exe
DEFLOGDIR=C:\ProgramData\McAfee\DesktopProtection
FP_NO_HOST_CHECK=NO
HOMEDRIVE=C:
HOMEPATH=\Users\marco
LOCALAPPDATA=C:\Users\marco\AppData\Local
LOGONSERVER=\\AMISNT
MpConfig_ProductAppDataPath=C:\ProgramData\Microsoft\Windows Defender
MpConfig_ProductCodeName=AntiSpyware
MpConfig_ProductPath=C:\Program Files\Windows Defender
MpConfig_ProductUserAppDataPath=C:\Users\marco\AppData\Local\Microsoft\Windows
Defender
MpConfig_ReportingGUID=CA08B82B-EF0A-4107-89D8-ED5BB37E7515
NUMBER_OF_PROCESSORS=2
OS=Windows_NT
Path=C:\oracle\product\11.2.0\dbhome_1\bin;C:\Windows\system32;C:\Windows;C:\Win
dows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
PERL5LIB=c:\oracle\product\10.2.0\db_1\perl\5.8.3\lib\MSWin32-x64;c:\oracle\prod
uct\10.2.0\db_1\perl\5.8.3\lib;c:\oracle\product\10.2.0\db_1\perl\site\5.8.3;c:\
oracle\product\10.2.0\db_1\perl\site\5.8.3\lib;c:\oracle\product\10.2.0\db_1\sys
man\admin\scripts;
PROCESSOR_ARCHITECTURE=AMD64
PROCESSOR_IDENTIFIER=Intel64 Family 6 Model 23 Stepping 10, GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=170a
ProgramData=C:\ProgramData
ProgramFiles=C:\Program Files
ProgramFiles(x86)=C:\Program Files (x86)
ProgramW6432=C:\Program Files
PROMPT=$P$G
PSModulePath=C:\Windows\system32\WindowsPowerShell\v1.0\Modules\
PUBLIC=C:\Users\Public
SESSIONNAME=Console
SystemDrive=C:
SystemRoot=C:\Windows
TEMP=C:\Users\marco\AppData\Local\Temp
TMP=C:\Users\marco\AppData\Local\Temp
USERDNSDOMAIN=AMIS
USERDOMAIN=AMIS
USERNAME=marco
USERPROFILE=C:\Users\marco
VBOX_INSTALL_PATH=C:\Program Files\Sun\VirtualBox\
VSEDEFLOGDIR=C:\ProgramData\McAfee\DesktopProtection
windir=C:\Windows
C:\>The only thing that identifies that I have Oracle installed is set in the %PATH% variable and %PERL5LIB%. From the path setting you can also deduct that I have Oracle 11 and Oracle 10 software installed. So when I execute "sqlldr" what NLS settings will it use and which tnsnames.ora alias for example to connect to the database...?
You can you do it and see what happens...
C:\>sqlldr
SQL*Loader: Release 11.2.0.1.0 - Production on Wed May 12 20:36:25 2010
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
Usage: SQLLDR keyword=value [,keyword=value,...]
Valid Keywords:
...So it will pick the first "sqlldr" in the %PATH% environment setting. But what about NLS...? As said to be absolute sure you will have to set it in your environment.
C:/> set ORACLE_HOME="C:\oracle\product\10.2.0\db_1"
C:\> set
Path=C:\oracle\product\11.2.0\dbhome_1\bin;C:\Windows\system32;C:\Windows;C:\Win
dows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
PERL5LIB=c:\oracle\product\10.2.0\db_1\perl\5.8.3\lib\MSWin32-x64;c:\oracle\prod
uct\10.2.0\db_1\perl\5.8.3\lib;c:\oracle\product\10.2.0\db_1\perl\site\5.8.3;c:\
oracle\product\10.2.0\db_1\perl\site\5.8.3\lib;c:\oracle\product\10.2.0\db_1\sys
man\admin\scripts;
ORACLE_HOME="C:\oracle\product\10.2.0\db_1"
C:\> echo %ORACLE_HOME%
"C:\oracle\product\10.2.0\db_1"Because if I enter "sqlldr" it will pick the executable from the 11.2 install, but the ORACLE_HOME is set to the wrong environment
Executing sqlldr now will give me an error
C:\>sqlldr
Message 2100 not found; No message file for product=RDBMS, facility=ULMessage 21
00 not found; No message file for product=RDBMS, facility=UL
C:\>Another thing you can notice now is that from that output alone, you can't deduct the Oracle "sqlldr" version anymore. Setting the ORACLE_HOME environment to either 10.2 or 11.2 will cause "sqlldr" to execute normally (at least thats how it looks) BUT in the case of the oracle 10.2 setting it will use the wrong message files etc. At least not the correct software versions / files "sqlldr" is shipped with. So you can (and most of the time) will get strange errors.
C:\> set ORACLE_HOME=C:\oracle\product\10.2.0\db_1
C:\>sqlldr
SQL*Loader: Release 11.2.0.1.0 - Production on Wed May 12 20:45:00 2010
C:\>set ORACLE_HOME=C:\oracle\product\11.2.0\dbhome_1
C:\>sqlldr
SQL*Loader: Release 11.2.0.1.0 - Production on Wed May 12 20:49:50 2010
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
Usage: SQLLDR keyword=value [,keyword=value,...]
...In the registry you can find a lot of those variables are set for ORACLE_HOME, ORACLE_BASE, SQLPATH, maybe TNS_ADMIN, ORACLE_SID, NLS_LANG. You can find the variables IN the registry on two places. The most common one is the SYSTEM wide environment settings under //HKEY_LOCAL_MACHINE/SOFTWARE/ORACLE and in my case for 11.2 under //HKEY_LOCAL_MACHINE/SOFTWARE/ORACLE/KEY_OraDb11g_Home1.
You could overrule this for to be active on "my user session", my login session as account "marco" under //HKEY_CURRENT_USER/Software/Oracle, but no one using Windows is doing this.
Besides the "cmd" and registry environment, there is a different place as well were you can set these parameters. In windows go to "start", click "control panel", click "system", click tab "Advanced" and then click on the button on the bottum with "Environment Variables". Here you can see the distinction between user and system wide variables as well. Here you can also set NLS_LANG, ORACLE_HOME etc. If I am not mistaken than these will be the default values used in a fresh "cmd" window session. But they can and will interfere with programs you start via clicking them. For example something a Java program like SQL Developer (and/or Toad). If those values are not overrulled by the program by for example using his own variables from a config file or else, those sessings from the "system" / control panel item will be used. If it is the wrong mix, you will encounter strange issues.
Setting ORACLE_HOME and ORACLE_BASE will be used by a lot of derived other settings for example the default place SQL*Net drivers and tnsnames aliases etc will be checked. For example setting the ORACLE_HOME to
C:\> set ORACLE_HOME=C:\oracle\product\10.2.0\db_1will result in that the tnsnames aliases from
C:\> set ORACLE_HOME=C:\oracle\product\10.2.0\db_1\NETWORK\adminwill be used and NOT the ones maybe needed from
C:\oracle\product\11.2.0\dbhome_1\NETWORK\adminYou can overrule this behavior by setting the TNS_ADMIN variable. By default, most explicit form for example on linux and Unix, the following rule will be used by Oracle
1) .tnsnames.ora in the home directory of the user
2) standard default: $ORACLE_HOME/network/admin
3) behavior can be overruled via setting $TNS_ADMINThe fact that you are able via Toad to execute it correctly proves you that it can be done. But Toad uses in your session "SQL*Net" or JDBC or ODBC or ADO or ? via its own configuration environment settings that are being set on which values...?
Both Oracle and Toad use the OSI model (http://en.wikipedia.org/wiki/OSI_model), both have to follow the same rules. There hasn't been changed that much over the years, character set conversions are done in the "two task common" layer of the data transport on either side (client/server) when data travels between a client and server. And don't forget a database can be also be a client when for instance database links are being used. One of the reasons to read old manuals because there the basics are still perfectly explained: http://download.oracle.com/docs/cd/A57673_01/DOC/net/doc/NWUS233/ch2.htm#twotask (Oracle 7.3.4 Networking Manual).
This long long story is just to show you that you have more control if you set variables explicitly in a "cmd" window (and or in a linux/unix shell (as long as the session isn't "forked")) BUT you will have to be precise. Check the environment a set those environment variables that control / that are being used by "sqlldr" (and that are probably more then you realised, for example that SQL_PATH variable is the default directory where SQL*Plus is looking and saving its "SQL" and spool "LIS" files).
HTH

"Red Error" when importing video files

Hello, I tried importing video files (.MOV) into Final Cut Pro X but this "red file error" just comes out and I don't know what to do. I even tried importing my video clip from my iSight camera but it just shows that red error. I feel like every video file imported gets "redded". I don't know how to solve this problem. Thank you all!
- MT
P.S. Final Cut Pro X 10.0.3

You have "Proxy media" selected under Preferences->Playback, but you are not creating proxy media for your clips on import. That's why you get the red clips.
This is easy to solve. Either:
1) Create the proxy media for your clips, by control-clicking, and choosing "Transcode Media..." and checking the box for proxy media;
or
2) Choose "Original/Optimized media" in Preferences->Playback.
Proxy media uses less disk space and is easier to handle than either the original or optimized media, but is of lower quality; but you can do all the editing in proxy, and then just before you are done, switch again to original/optimized. This way you get lower overhead when editing, and still get the better quality result.
This may be even more relevant for older, less powerful macs, or when you need to use an internal drive, or a slow usb drive with FCP X. If you have a fast mac and a fast drive, you can work away without transcoding, for the most part (multicam clips and other heavier edits may still warrant a transcode).

Error when importing static files in run-time installation

Hello all,
I have a development environment running 3.2 and also a run-time test environment running 3.2. I'm trying to import an export of static files from the development environment into the test environment, and we're getting the following:
SQL> @static_file.sql
Set Credentials...
Check Compatibility...
API Last Extended:20090112
Your Current Version:20090112
This import is compatible with version: 20090112
COMPATIBLE (You should be able to run this import without issues.)
Set Application ID...
...static file repository
declare
ERROR at line 1:
ORA-00001: unique constraint (APEX_030200.WWV_FLOW_HTML_REPO_IDX1) violated
ORA-06512: at "APEX_030200.WWV_FLOW_HTML_API_PRIVATE", line 84
ORA-06512: at "APEX_030200.WWV_FLOW_HTML_API", line 45
ORA-06512: at line 6
We've exported and imported these same static files in the past with no issues, and we also exported and imported two applications and an image export without issues.
Any idea what is causing this?
Thanks!
John

Update:
I had two static files in my export - one was assigned to a specific application and one wasn't. When I ran into the issue importing, I had elected to export "all static files". I just tried it again, but exported and imported each of them individually, and it worked fine so I'm back in business.
But perhaps there is an issue when exporting all files, when they aren't all assigned the same way? Maybe something to be looked into...
John

Error while importing .tpz file into ESR..

Hi Gurus,
I am facing one problem.
I developed one interface in XI3.0 development server.
I imported the integration directory object into quality but when importing the ESR part it got imported successfully,.But was not visible in list.when I went to change list it , and tried to activate the SWCV it gives error.
In ID I had exported whole configuration scenario and in ESR I had exported Namespace.
But first time when I exported ESR part I had checked "inlcude deleted objects". but I again exported and tried importing the ESR namespace, this time without checking "included deleted objects"
Error I am getting while activating the SWCV:
Namespace cannot be deleted since the software component version still contains objects in namespace "http://Namespacename"
Delete the objects first Originality indicator for the software component version set later. Ensure that the software component version only contains one original repositor
How can I delete it when I can even see it?
please help.
Thanks

Hey guys, the issue got reolved.
I did "Reject change".
Actually , when I first imported the .tpz I could not see the namespace,and tried doing it again.
But when I did reject change the namespace came in the list.

Error after importing PAR file into NWDS

Hi Experts,
I have imported a par file into my NWDS worlspace . While building the project it's giving the following error .
import javax.servlet.http.HttpServletResponse can't be resolved .
While i am organizing the importa , the same import is getting deleted and i am getting a new error as follows .
The project was not built since its classpath is incomplete. Cannot find the class file for javax.servlet.http.HttpServletRequest. Fix the classpath then try rebuilding this project.
jdk1.5 has been configured correctly inside NWDS and i have tested it also .
Can anybody help me out regarding this .
Thanks in advance .

Hi Jain,
Just right click on project to properties->java build path-> add external jars add the jar file servlet.jar.
Venkat.

Problems when importing multiple files into key frames

I'm creating an interactive flash application that uses hundreds of individual renders from a 3d modelling app. The image file size is 800 x 600. Each sequence that i import to the stage is around 120 images and each gets put into a separate key frame. The problem is, often when I import batches of files into flash the program crashes and stops responding. The problem gets worse after each succesful import ie. after importing the first lot of files, its unlikely that the second lot of files will import.
Interestingly, I dont have this problem on my pc. So I can do all the importing on my pc, but when I try and compile the swf file my pc does not create a file and sometimes crashes. So I am having to import on my pc and compile the swf on my mac.
Anyone else having similar problems? is there a better way of going about this?

flash is limited to 16,000 frames.
use several swfs and load them into a main swf.

Error when importing UTF8 Files into SOD

Similar Messages

Maybe you are looking for