Error when loading XSLT mapping of the application

Hi,
I am using XSLT mapping in XI.
It is working ok when I test it in Interface Mapping but it gives below error when I test end to end scenario.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">TRANSFORMER_CONF_EX</SAP:Code>
<SAP:P1>com/cba/***.xsl</SAP:P1>
<SAP:P2>urn:**:**</SAP:P2>
<SAP:P3>450326d0-1559-11dd-99a1-d89c0a0a380b</SAP:P3>
<SAP:P4>-1</SAP:P4>
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when loading XSLT mapping of the application</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Yes, I have activated it
Regards,
Anirudh.

hi
please assure that if you save your xslt stylesheet locally, that it is saved in UTF-8 format, before you import it.
Pls do export the imported archive as a zip file to your local disk and try opening the same. If its not then the zip file which you have uploaded might have got corrupted/is not fully uploaded.
Try activating the imported archive and do a check before you do that. This you can do with a minor change in the description or so.
reward points if found helpfull
regards
chandra.k

Similar Messages

Exception occurred during XSLT mapping of the application

Hi
While Developing XSLT mapping i got the error message as
<SAP:Code area="MAPPING">TRANSFORMER_EXCEPTION</SAP:Code>
<SAP:P1>OTA_VehAvailRateRQ_XSLT</SAP:P1>
<SAP:P2>http://kcdata.com/OTA_VehAvailRate</SAP:P2>
<SAP:P3>b5351710-4911-11dd-a7f7-ed57ac1600cf</SAP:P3>
<SAP:P4>-1</SAP:P4>
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Exception occurred during XSLT mapping of the application</SAP:Stack>
please provide me your help

Hi all,
The Problem is solved as we later realised the actual problem is with the input XML file provided to us.
We tried using a different XML file which was processed succesfully earlier ..and its working all fine now.
Thanx all,
take care

Error when loading a flat file from Application server.

Hi,
I am trying to load a flatfile from the application server, and I am getting the message
Error while accessing the application server file
Message no. RSDS_ACCESS002
I checked for notes and found only one:
Note 1033978 - Correction: Loading Unicode files from application server
but we have 19 SP level, and the note says it needs 13 SP level, so I think it would not be of any help.
does anybodie know what to do??
thanks for the help.
Mauricio

Error in accessing while application server file..
when i am trying load the data to psa
when i am taking the file name: text-type file from app server
plz reslove me for this problem??
another question
when i am saving the file with using * in the filename in .CSV file its not saving,
whats the reason????
ASHOK

App throws error when loading in browser for the first time

I have designed an app for outlook which I am testing in the web version of office. When I first click on the app it says there is a problem loading the app and I have to press reload. The app is a asp.net app but the most of the code is an angular SPA. Is there a way of stopping this error.
Chris

Hi,
The platform requires that Office.js is invoked within 5 seconds of us navigating to the page of where your app is. Can you make sure that you are adding the Office.js script at the very top of the page?

There is an error when I want to reinstall the applications that came with my mac (after having reinstalled the Mac OS X DVD). What can I do?

I erased my hard disk and then installed the Mac OS X DVD. After having done this I wanted to install the applications too, for which I introduced the Applications DVD. The DVD is recognized and I follow the instructions given. On the last step, the installation, the Installer shows me a Message. It says that there is an error, and that I should contact the Software developer. It is very weird, because there is no error number or any other explanation. If somebody could help, I would be enormously thankful.

If you have a backup (and I hope you did one as before any potentially dangerous task), you can restore it.
If you don't, but have a recent system, you may try to boot in recovery mode.
If you can't, you have to get another computer (or simply your Windows Mac) to "burn" your system image either on a DVD or a flashdisk (.dmg are just .iso so you can change suffix).
Anyway, each and every data you had on you HDD, including 3rd party apps, would be lost.

JAVAMAP-Sax Parser ...............Linkage error when loading the class.

Dear all,
Do we have any extra things to execute the Java mapping using the Sax Parser?
When I am executing the interface mapping ,I am getting the" Linkage error when loading the class" error.
Kindly let me know your personnel maildId so that I can mail you the screen shots.
Thanks,
Srinivasa

Dear sunil,
Find the File.
Source:
<MTO_FTP_MAT_DETAILS>
<MATDETAILS>
<MAKTX>
<MATNR>
<WERKS>
<LABST>
<MEINS>
<PERCNT>
TARGET
MTI_FTP_MAT_DETAILS
<MATDETAILS>
<MAKTX>
<MATNR>
<WERKS>
<LABST>
<MEINS>
<PERCNT>
Source:
<MTO_FTP_MAT_DETAILS>
<MATDETAILS>
<MAKTX>
<MATNR>
<WERKS>
<LABST>
<MEINS>
<PERCNT>
TARGET
MTI_FTP_MAT_DETAILS
<MATDETAILS>
<MAKTX>
<MATNR>
<WERKS>
<LABST>
<MEINS>
<PERCNT>
import java.io.IOException;
import java.io.InputStream;
import java.io.OutputStream;
import java.util.Map;
import javax.xml.parsers.SAXParser;
import javax.xml.parsers.SAXParserFactory;
import org.xml.sax.Attributes;
import org.xml.sax.SAXException;
import org.xml.sax.helpers.DefaultHandler;
import com.sap.aii.mapping.api.StreamTransformation;
class Echo {
public static OutputStream out;
public class myEcho extends DefaultHandler implements StreamTransformation {
private Map map;
public void setParameter(Map param) {
map = param;
public void execute(InputStream in, OutputStream out) {
DefaultHandler handler = this;
SAXParserFactory factory = SAXParserFactory.newInstance();
try {
SAXParser saxParser = factory.newSAXParser();
Echo.out = out;
saxParser.parse(in, handler);
} catch (Throwable t) {
t.printStackTrace();
public void startDocument() throws SAXException {
try {
Echo.out.write("<?xml version='1.0' encoding='UTF-8'?>".getBytes());
} catch (IOException e) {
e.notify();
public void endDocument() throws SAXException {
try {
Echo.out.flush();
} catch (IOException e) {
throw new SAXException("I/O error", e);
public void startElement(String namespaceURI, String sName, // simple name
String qName, // qualified name
Attributes attrs) throws SAXException {
String eName = sName; // element name
if ("".equals(eName))
eName = qName; // not namespace-aware
if ("ns0:MTO_SAP_MAT_DETAILS".equals(qName)) {
try {
Echo.out.write(("<MTI_FTP_MAT_DETAILS>").getBytes());
} catch (Exception e) {
e.printStackTrace();
} else {
try {
Echo.out.write(("<" + qName + ">").getBytes());
} catch (Exception e) {
e.printStackTrace();
public void endElement(String namespaceURI, String sName, // simple name
String qName // qualified name
) throws SAXException {
String eName = sName; // element name
if ("".equals(eName))
eName = qName; // not namespace-aware
if ("ns0:MTO_SAP_MAT_DETAILS".equals(qName)) {
try {
Echo.out.write(("</MTI_FTP_MAT_DETAILS>").getBytes());
} catch (Exception e) {
e.printStackTrace();
} else {
try {
Echo.out.write(("</" + qName + ">").getBytes());
} catch (Exception e) {
e.printStackTrace();
public void characters(char buf[], int offset, int len)
throws SAXException {
String s = new String(buf, offset, len);
try {
Echo.out.write(s.getBytes());
} catch (Exception e) {
e.printStackTrace();

Error on load: System.IO.IOException: The process cannot access the file : error in event viewer when users want to view documents from this third party deployed scan solution

Error on load: System.IO.IOException: The process cannot access the file
'\\server1\SCANSHARED\.pdf' because it is being used by another process.
   at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
   at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)
   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share)
   at System.IO.File.WriteAllBytes(String path, Byte[] bytes)
   at abc.Scan.Layouts.ICC.Scan.View.Page_Load(Object sender, EventArgs e)
I faced this error in event viewer when users want to view documents from this third party deployed scan solution
here I have two WFS servers and they configured with load balancing in F5 .
when I enable both servers in F5 I receive this error messages in 2nd server,
when users want to view documents
adil

Do you have antiVirus installed on the sharepoint servers?
These folders may have to be excluded from antivirus scanning when you use file-level antivirus software in SharePoint. If these folders are not excluded, you may see unexpected behavior. For example, you may receive "access denied" error messages when files
are uploaded.
Please follow this KB and exclude the folders from Scanning.
http://support.microsoft.com/kb/952167
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

When trying to open iphoto I get the error message "You can't open the application iPhoto because it may be damaged or incomplete." How do I fix this and get my photo's back?

When trying to open iphoto I get the error message "You can't open the application iPhoto because it may be damaged or incomplete." How do I fix this and get my photo's back?

To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store you can find it in your Purchases List.

I am facing the problem on downloading apps from Mac App Store, when I try to install the application from App store, I am getting an error message "Status_Code_Error" while click on "Login"

I am facing the problem on downloading apps from Mac App Store, when I try to install the application from App store, I am getting an error message "Status_Code_Error" while click on "Login"

Same problem here in Brazil.
It seems to be a problem with logging in App Store in the Mac (Yosemite 10.10.2).
When I tried the very same userid and password I was able to login in to use my iCloud account from the same computer and also from my iPhone.

I keep getting the error message: " You can't open the application "%@" because it may be damage or incomplete" when I try to install a software that I purchased.

I have a typing software that I bought a while ago. I had installed it on an old pc but I just bought a macbook and I'd like to install it onto the new macbook, as I no longer use the old pc. When I open the installer, I get the error message: " You can't open the application "%@" because it may be damage or incomplete"
Does anybody know if this is fixable or if I need to just buy a new disk?
Thanks!!!

I copy pasted this from the developers website for the minimum requirements of your device: Macintosh® OS X 10.4 – 10.5, PowerPC G4, G5 or Intel Core Duo processor, 800 MHz processor or higher, 256 MB RAM, CD/DVD-ROM drive, 300 MB free hard disk space, Video card with 32 MB of video RAM, 1024 x 768 24-bit color display, Speakers, keyboard & mouse.
Does a macbook pro meet these requirements?

Error -5000 and: Error when loading the transcode setting

For a couple of days I've been trying to export my project on a DVD, but on the half way of the transcoding it comes the Error -5000, and then there is such a message, something about the navigation, can't be found etc... I work on a mac OS X, using Encore CS3, all my data I've got on my external harddisk, with space of 80 GB.
Besides, when I'm trying to export my project on a blu-ray disc, there comes a message: Error when loading the transcode setting! I know that there are only two codecs there - H.264 and MPEG-2, and there are only MPEG-2 movie files there, so I set the MPEG-2 codec. And there comes such a thing! Having set the H.264, there comes the same. What can it be?
And the last one is the copy protection. I know that it can be activated, with CGMS and Macrovision, only if the CSS option is set on "permit no copies". So I do, and then there comes a message - "for these settings there is no copy protection provided". So what now to do?

My flash drive PNY comes up with error -5000 and i do not know what to do can you help me with this problems

Error 1003 when loading subpanel VI in build application (VI not executable)

Error 1003 loading subpanel VI in build application (VI not executable). I referenced all supanel VI callers in my build app. What am I missing?

Thanks for your reply!! I tried a few things I found online including the article you posted...this unfortunately did not solve my problem. Through some trial and error process I found the issue was with my build properties in the advanced section shown below.
I had to check LabVIEW8.x file layout to allow the subpanel VI to load into my main app. I didn't think to check this cuz my code was developed in version 2010. I'm guesssing some of the callers where originally created in older versions and needed the the LabVIEW8 file layout, even though all my source code is compiled in version 10. If you think I might be wrong on this assumption let me know.
P

Error when loading the callback component

Hi friends
Am getting this error. Error when loading the callback component. Am working in Travel expense workflow which is 2 level based on condition. If its EG > 8 its one level and EG < 8 its 2 level. When the approver does the approval am changing the status from 3 to 4 at that time the pernr is getting locked. Next step itself mail step. But the workflow is throwing the error and mail its hanging in the mail step. I have try to restart the workflow but its not restarting. Error when loading the callback component this error is showing in the lock pernr. Am not locking the pernr system locks the pernr by itslef and not unlocking the pernr. How to solve this issue.
Regards
vijay

Hello,
Check if OSS Note 854495 is applicable.
regards
Rick Bakker
Hanabi Technology

Hey, I recently purchased the creative cloud and installed photoshop but now when I go to open the application it tells me theres a configuration error. It suggests restarting or contacting customer support but I thought I'd try this first. the error code

I recently purchased the creative cloud and installed photoshop but now when I go to open the application it tells me theres a configuration error. It suggests restarting or contacting customer support but I thought I'd try this first. the error code is error: 213:19. Does anyone seeing this please have any advice on what to do?

This is an open forum, not Adobe support... you need Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

I want to update my adobe photoshop, but when I go to open the application it gives me an error code 6

I want to update my adobe photoshop, but when I go to open the application it gives me an error code 6

So you disabled both the firewall and antivirus?
You can try a manul update/restore using the instructions here:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch

Error when loading XSLT mapping of the application

Similar Messages

Maybe you are looking for