Error when no results found

Hi, I made a workflow that does the following:
1. Find Finder Items
2. Move Finder Items
I am using it to search a folder for files of a certain title and move them to a specific folder. Basically a standard folder organizer. It works great when the first command, Find Finder Items, returns results. However, the workflow stops and throws an error when no results are found.
Is there any way to end the script gracefully (without causing an error) if no results are found or skip the Move Finder Items command and continue with the rest of the workflow? I am sure this can be solved with an AppleScript but I would like to stick with Automator. Thanks.
Thanks!

I have the same question. Basically I'm trying to take a folder full of unorganized files and sort them by name and move files to different folders.
Basically I have to repeat the commands several times
- get folder items
- sort items
- move items to folder
- get folder items
- sort items
- move items to folder
I basically have to do this for each item I want to move so for me its like a dozen times. The problem is that if the automator reaches the sort items part and doesn't find any of that file type then the automator errors and stops there rather than just continuing on.
Is there any way of just getting it to ignore errors and continue running the automator? I can't find any way to do this.

Similar Messages

Formatting issues with reports when no results found

Hi,
I have dashboard where in I have two reports, one displays images based on the claculation of fact and targets for the current week and the other report which displays just the fact data for the previous six weeks. We are displaying the KPI labels only for the first report and placed both the reports in the same section horizontally, to make it easy for comparision.
The problem araises when there is no data found for the first report, then the KPI labels will also not be displayed.
If we display the lables for the second report also, then it could be redundant.
Both the reports shuold have a single title.
Is there any way to design such a layout!!
Any immediate help would be appreciated.
Thanks!!
Vasantha.P

One thing you might do is this. Don't display the Title View in your reports. You can do this either by deleting the views from the Compound Layout or, within Edit Dashboard, by selecting only the view that contains the report. (Obviously, if your report has several view, you would need to choose the first route.)
Instead of the Title View, do this: In the Dashboard section which contains both reports, click on the "Rename" button. Type the name of that best illustrates both reports, check the "Display Section Heading" checkbox and click "OK."
Next, click the "Rename" button again and this time go in to the formatting section to format as required. (Note: After you check the checkbox, if you don't click "OK" right after, the check mark won't stick. So click "OK" and then go back in to do any formatting you wish.)
This method allows the user to collapse the section and still see what the section is about. This is good practice when you have several reports in one dashboard page. Even collapsing all the sections, you can see what is "inside" and expand the appropriate section.
HTH,

Memory Error When Compiling Resulting in Program Termination

When I compile my file, it prints the following message
"There is not enough memory for this task. Quit one or more
programs to increase available memory and then try again."
I can rule out memory and incorrectly named files:
* I have 1 GB memory with no other programs open after a
clean reboot when I get this message. My virtual memory is adequate
as well. I also have 20 GB free drive space on C drive and 15 GB
free on the network drive.
* I have no spaces in the file names; all spaces are replaced
with underscores.
Any idea of what can cause this or how to fix this?

Looks like the classes that you are using were compiled with a different JDK version.
Try using JDeveloper 10.1.3 - which has built in JDK 5.

Get error when CONNECT BY PRIOR used by where

Hi
I get "No more data to read from socket" error when the result of CONNECT BY PRIOR used after where, is there anybody encounter this error?
example SQL:
select
from table_A
where exists
(select 1 from table_b
START WITH table_b.col1 = 'value'
CONNECT BY PRIOR table_b.col1 = table_b.col2)
The sql select 1 from table_b START WITH table_b.col1 = 'value' CONNECT BY PRIOR table_b.col1 = table_b.col2 can return 2 row correct, but the whole sql does not work.

Hi! Rahul,
Thank you for your reply first. Your method doesn't work in my case. Can you tell me the steps of creating a new layout for added records and draft documents. I have created a quotation layout which work with added records only, the steps has been show below and please comments, thanks.
1. In Crystal Report > new blank report > create new connection > Choose "SAP Business One" > Select OQUT under "B1 Tables".
2. Insert "CardName" field to report > Create DocKey@ parameter and set it equal to DocEntry in select expert record function
3. Click Add-ins > SAP Business One > Save > Choose company database and input manager password.
Regards,
Ivan

I am Getting an error as file not found when i am trying to open vm virtual

I am getting an error when i am trying to open my oracle vm virtual box
The error is as follows
Runtime error opening 'C:\Users\S Pavan Kumar Reddy\VirtualBox VMs\Windows\Windows.vbox' for reading: -102 (File not found.).
E:\tinderbox\win-rel\src\VBox\Main\src-server\MachineImpl.cpp[724] (long __cdecl Machine::registeredInit(void)).
Result Code:
E_FAIL (0x80004005)
Component:
Machine
Interface:
IMachine {22781af3-1c96-4126-9edf-67a020e0e858}
So please anybody can help me to solve my problem or anybody can say how to back up the data present in my virtual box because my whole project is rest in that virtual box so please help me out to solve my problem

Hi EJ,
I wanted to check in to make sure you have everything working at this point?
Let me know if you have further questions.
Regards, Stacy

Get file not found error when I try to sync

I get file not found error when I try to sync Iphone.

SteveDVD,
The use of the .WMV was because that was part of the Library .EM template. I would not anticipate problems with other formats, so long as they are supported and the same for all of your Menus in the Project.
If you have done several Motion Menu Renderings, you might want to clear Encore's Media Cache, just in case it is still referencing previous Render files.
And yes, the re-Importation should yield the same result as Linking/re-Linking.
Unfortunately, I do not have CS4, so I can't test this for you. There do seem to be a few real Bugs in the various CS4 programs, and maybe this is one?
That "File Not Found" rings a bell in my feeble brain. Seems that there was a post on that, but I do not remember it being related to Motion Menus. Maybe search will yield something of use.
Good luck,
Hunt

Error when sending message: 404 not found

Hi,
New to XI, practicing file to jdbc scenario. File is pickedup from the source folder but nothing appearing on the receiver end ms access database.
In the Component Monitoring, tried sending message manually with all the right info in Integration engine, getting an error message saying:
"Error when sending message : 404 not found"
Also tried in Adapter Engine and the result same.
Before doing this scenario, I tried file - file scenario then also the sender file pickedup from source folder but nothing happend at the receiver end.
Any idea's?? what might be the issue????
Thanks,
Venu.

Hi Venu,
"404 is a not found error", plz make a check of your URL you're using is correct? do you use the right port? Normally the port is 80<SystemNo>, so rather 8001 than 7001.
Also check in transaction SICF, if the node /sap/xi/adapter_plain has been activated, if not, activate it and try again.
If you are testing sending the message to the Adapter Engine, then the Send Message URL should be like this:
http://<server>:<J2EEport>/MessagingSystem/receive/AFW/XI
For your error, refer to the following threads:
Unable to find an associated SLD element
Unable to refresh cache contents in XI.
Unable to find an associated SLD element
Also check that the Adapter Engine is successfully registered in the SLD. To do this, call the Content Maintenance function in the SLD as follows:
http://<sld-host>:<sld-j2ee-port>/sld u2192 Administration u2192 Content Maintenance.
Select XI Adapter Framework.
Thirteen associations have to be registered.
(Source: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2498bf90-0201-0010-4884-83568752a857)
If you can't find all the associations, then you will have to create the associations manually.
This is a very good blog which answers ur question:
check this weblog
https://weblogs.sdn.sap.com/pub/wlg/4061?page=last&x-showcontent=off [original link is broken] [original link is broken] [original link is broken]
Regards,
Vinod.

Drag&Relate with error 'no matching records found' when adding UDF columns

in SBO 2007A I added a large amount of UDF fields to marketing documents title section. Then I tried Drag&Relate, as result i got only the error 'no matching record found ....'.
I removed some of the UDF Fields and Drag&Relate works correct. It seems to be a length problem of the table row. But I have no information about such a restriction and the error message dont say anything about length problem.
Does anybody know about this behavior and the maximum length of table rows, or is there any other solution to fix this problem?

Hello,
there are approximatly 170 fields and most of them are alphanumeric (internaly nvarchar(max)) - when i remove 2 fields it works.
Best regards
Klaus
Edited by: Klaus Steinkellner on Jan 13, 2011 4:27 PM

CAUFVD gets initialized result in dump with error Production ord not found

Hi All,
We want to make change of start date and end date of a production order via CO02 (Production order change). Based on these changes we want to update an existing a Purchasing Planned Order Start Dt and Finsih Dt (MD12)
We are using Enhancement component (PPCO0007) : Exit when saving production order
Within this exit we are using BAPI_PALNNEDORDER_CHANGE to update some other purchasing planned order dates.
The BAPI_PALNNEDORDER_CHANGE is executing succesfully however the production order structure (CAUFVD) gets initialized resulting in dump with error Production order not found
How can we update and save a purchased planned order and also the production order
Barada
Edited by: barada satapathy on Dec 8, 2010 9:14 AM

Hi Max,
Thanks for the reply...
The error details are as below:
Dump gets generated via program : (SAPLCOBT).
Exception condition ORDER_NOT_FOUND raised.
include = LCOBPU16.
Row No: = 21.
Module Type = (Function)
Module Name = CO_BT_ORDER_DET_TEMP
We also give brief details on what is happening:
My exit calls from Standard (LCOZVU01) :
CALL CUSTOMER-FUNCTION '001'
           EXPORTING
                header_imp = caufvd
           IMPORTING
                header_exp = caufvd_tmp
                no_update = answer.
*     Check if update of header necessary and allowed
      IF caufvd-aufnr EQ caufvd_tmp-aufnr AND
         caufvd       NE caufvd_tmp.
        PERFORM caufv_upd(saplcobh) USING caufvd_tmp.
      ENDIF
When BAPI for planned order is executed within the exit, the structure (caufvd) values are found refreshed. This structure is further updating the production order.

Error code "File not found Result code = -43" PLEASE HELP!

I keep getting this error message: "File not found Result code = -43" when trying to load instruments from the media tab. Does anyone know why this is happening and know how to fix this problem? I'm in the middle of a project and need help! Thanks.

So, I've narrowed down the problem to happening with the following steps (could someone possibly try this and see if the same problem is happening?)
If I load an instrument track and its blank and select a GARAGEBAND loop from the media list, I get the error message.
If I load a new instrument track and select any other instrument from the media list (besides a Garageband instrument) everything loads fine, AND THEN if I select a Garageband instrument from the list, it loads fine with no error.
If I select "No plug-in" in the channel strip after this, and try to load a Garageband loop, I get the error message and all other instruments from the media lists fail to load until I select "no-plugin" again from the channel strip and select an instrument from the media list BESIDES a Garageband instrument and then go from there (and can then load a Garageband instrument).
Is anything like this happening to anyone else? Does anyone have any ideas why this would be happening?

Error when using API.DataWindow.Utilities.mShellAndWait: File not found

I am trying to run a simple command using API.DataWindow.Utilities.mShellAndWait, however I am experiencing the following error in FDM web. Strangely, I do not see the same error when the command is run from FDM Workbench:
Error: File not found
At Line: ###
The command is as follows:
Dim strCMD
strCMD = "ECHO %DATE% %TIME% >> \\<servername>\<folder1>\<folder2>\File.Log"
API.DataWindow.Utilities.mShellAndWait strCMD, 0
This command works fine when run directly from the command line. I am using a UNC path so thought this would have worked. Can anyone please suggest how I can resolve this? I have also tried the following and this results in a similar error:
Dim strCMD
strCMD = "ECHO %DATE% %TIME% >> \\<servername>\<folder1>\<folder2>\File.Log"
Set WshShell = CreateObject("WScript.Shell")
Set WshShellExec = WshShell.Exec(strCMD)
Error: The system cannot find the file specified.

I would expect the issue is due to user access priviledges.
When you run it through Workbench, the shell and wait is using your (logged on user's) credentials.
When it operates through the web stie, it is using the service account credentials.
If the service account does not have permissions, that could explain the 'file not found', though I would expect an access is denied error.
$.02

IView not found error when searching

Hi,
We see the below error when trying to do any search on the EP6 SP14 portal. The search function was working, but now we see this error.
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
iView not found:
pcd:portal_content/every_user/general/eu_role/com.sap.km.home_ws/com.sap.km.hidden/com.sap.km.urlaccess/com.sap.km.basicsearch.
Exception id: 01:29_09/03/06_0003_1786050
See the details for the exception ID in the log file
The search functionality was working last week. The
com.sap.km.basicsearch iview is there.
Any help is greatly appreciated.
Regards,
Rick

Rick,
Goto the Physical location of the iView and see whether the iView exists there. If yes, then right-click on it and select 'Preview' and then try to enter anything and say Search. Do you get the same error message here also.
Or create your own iView from the par(basicSearch iview) and try to search from your own iView also. Let me know the results.
Regards
Vaib

When I book the PTO or ATO model, I am getting the error "Configuration validation resulted in error(s)."

Deal All,
When I try to BOOK the PTO or ATO model, I am getting this error "Configuration validation resulted in error(s).". System is not allowing me to BOOK the order.
Really appreciate if anyone faced this type of issue and please provide some solution on this.
Regards
Subramanyam Jayaram
Mobile : +91-888 680 1966

Please review the following docs and see if any helps.
Configuration Validation Resulted In Error(s) While Booking after Upgrade to R12 (Doc ID 1679380.1)
Configuration validation resulted in error(s); ORA-01403: no data found in Package oe_config_pvt (Doc ID 384266.1)
11.5.10.25.37 or lower - When Booking, Configuration Validation Resulted In Error(s) (Doc ID 727949.1)
"CONFIGURATION VALIDATION RESULTED IN ERROR(S)" WHEN BOOKING THE ORDER (Doc ID 1065818.1)
Configuration Validation Resulted In Error(s) While Booking (Doc ID 358164.1)
OEXOEORD: Booking Errors. Configuration Validation Resulted In Error(S). (Doc ID 311606.1)
Thanks,
Hussein

Captivate 8: Why am I getting a HTTP 404 Not Found error when I try to preview a responsive project?

Captivate 8: Why am I getting a HTTP 404 Not Found error when I try to preview a responsive project?

Out of curiosity, some here have recommended renaming an EXE file behind the scenes to eliminate that firewall message when starting up. Are you one of those folks that tried this? My thought is that if so, perhaps this is a result?
Cheers... Rick

"No Results Found" Grammatical Error

I don't know how else to notify Spotify of the minor grammatical error on the "No Results Found" page; the subtext says "...or use less or different keywords" when it should say "...or use fewer or different keywords". Not a major fix, but it would make the program seem more professional.

I have the same question. Basically I'm trying to take a folder full of unorganized files and sort them by name and move files to different folders.
Basically I have to repeat the commands several times
- get folder items
- sort items
- move items to folder
- get folder items
- sort items
- move items to folder
I basically have to do this for each item I want to move so for me its like a dozen times. The problem is that if the automator reaches the sort items part and doesn't find any of that file type then the automator errors and stops there rather than just continuing on.
Is there any way of just getting it to ignore errors and continue running the automator? I can't find any way to do this.

Error when no results found

Similar Messages

Maybe you are looking for