Error when printing reports from forms in Linux

Im having an error when printing a report from a form. The problem is, only with certain forms. when printing a report (to PDF) from other forms, it prints with no problems. The oracle is 10g AS and operating system is Redhat AS 3.
The error, in the log from the reports server is:
[2004/9/7 7:14:59:599] Exception 62204 (): Internal error writing the image BandCombine: a row of the matrix does not have the correct number o
f entries, should be OpImage.getExpandedNumBands(source0.getSampleModel(), source0.getColorModel()) + 1..
exception oracle.reports.RWException {
oracle.reports.RWError[] errorChain={struct oracle.reports.RWError {
int errorCode=62204,
java.lang.String errorString="Internal error writing the image BandCombine: a row of the matrix does not have the correct number of entries, sh
ould be OpImage.getExpandedNumBands(source0.getSampleModel(), source0.getColorModel()) + 1..",
java.lang.String moduleName="REP"
at oracle.reports.utility.Utility.newRWException(Utility.java:604)
at oracle.reports.toolkit.image.writer.JPEGImageWriter.writeImage(JPEGImageWriter.java:130)
at oracle.reports.toolkit.image.ImageManager.writeJPEGImage(ImageManager.java:524)
at oracle.reports.engine.EngineImpl.CRunReport(Native Method)
at oracle.reports.engine.EngineImpl.run(EngineImpl.java:353)
at oracle.reports.engine.EngineClassPOATie.run(EngineClassPOATie.java:84)
at oracle.reports.engine.EngineClassPOA._invoke(EngineClassPOA.java:117)
at oracle.reports.engine.EngineClassPOA._invoke(EngineClassPOA.java:62)
at com.inprise.vbroker.poa.POAImpl.invoke(POAImpl.java:2355)
at com.inprise.vbroker.poa.ActivationRecord.invoke(ActivationRecord.java:104)
at com.inprise.vbroker.GIOP.GiopProtocolAdapter.doRequest(GiopProtocolAdapter.java:492)
at com.inprise.vbroker.IIOP.ServerProtocolAdapter.doRequest(ServerProtocolAdapter.java:64)
at com.inprise.vbroker.GIOP.GiopProtocolAdapter.dispatchMessage(GiopProtocolAdapter.java:653)
at com.inprise.vbroker.orb.TPDispatcherImpl$TPDispatcher.run(TPDispatcherImpl.java:99)
at com.inprise.vbroker.orb.ThreadPool$PoolWorker.run(ThreadPool.java:76)
[2004/9/7 7:14:59:599] Error 50103 (C Engine): 19:14:59 ERR REP-0069: Internal error
REP-62204: Internal error writing the image BandCombine: a row of the matrix does not have the correct number of entries, should be OpImage.get
ExpandedNumBands(source0.getSampleModel(), source0.getColorModel()) + 1..
[2004/9/7 7:14:59:600] Error 50103 (C Engine): Error Writing Image, ID 2
[2004/9/7 7:14:59:601] Error 50103 (rwtic:rwticga): Look up for image attributes for image 2
[2004/9/7 7:14:59:602] Error 50103 (rwtic:rwticgi): Looking up for Image, ID 2 in the cache
[2004/9/7 7:14:59:603] Error 50103 (rwtic:rwticgi): Loading the Image into the cache
[2004/9/7 7:14:59:603] Debug 50103 (ImageManager:getImageSource): Retrieving the Image object for ID : 2
[2004/9/7 7:14:59:603] Error 50103 (rwtic:rwticgi): Image successfully loaded into the cache
[2004/9/7 7:14:59:604] Debug 50103 (ImageSource:getImageHeight ): Start Height : 155
[2004/9/7 7:14:59:604] Debug 50103 (ImageSource:getImageWidth ): Start : width : 138
[2004/9/7 7:14:59:604] Debug 50103 (ImageSource:getImageColorSpace ): Start
[2004/9/7 7:14:59:608] Exception 50125 (): Caught exception: java.lang.NullPointerException
exception oracle.reports.RWException {
oracle.reports.RWError[] errorChain={struct oracle.reports.RWError {
int errorCode=50125,
If anyone could help me, is important !
Thx in advance
Bruno Santos

Raise a TAR I reckon

Similar Messages

Internal server error when running report from form

i am getting the following error when I run a report from a form using 9i:
java.lang.NumberFormatException: mgb_5
this is my code:
DECLARE
repid REPORT_OBJECT;
vc_rep VARCHAR2(20);
vc_URL VARCHAR2(100);
vc_rep_job VARCHAR2(10);
BEGIN
repid := find_report_object('rep2');
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_FILENAME,'C:\uni\mdt\cw1\rep2.rdf');
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_EXECUTION_MODE, RUNTIME);
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_COMM_MODE, SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_DESTYPE, CACHE);
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_DESFORMAT, 'htmlcss');
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_SERVER,'rep_mgb');
vc_rep := RUN_REPORT_OBJECT(repid);
vc_rep_job := substr(vc_rep,instr(vc_rep,'_')+1);
vc_URL := '/reports/rwservlet/getjobid' ||vc_rep_job||'?server='||get_report_object_property (repid,report_server);
web.show_document(vc_url, '_blank');
END;

Michael,
print out "vc_rep_job" to a message or alert to see if this contains a valid number. If this shows as a valid number try to manually type the access URL into a browser URL field. If this shows then you have a hidden character within your URL.
The PLSQL code looks okay.
Frank

Error when print report from apex using apex listener 2

Hi
Apex 4.2
I want print report to pdf from apex using apex listener 2.
The print server 'Oracle APEX listener' has been defined at the instance-level.
ACL has been configured.
I attempt to download a report in PDF mode, it appears that it downloads,
but when I go to open it up I get an error that the file is of the wrong type or possibly corrupt.
Upon opening the file in Text editor, there is an error as below
%PDF-1.4
1 瀛楄妭鐨?UTF-8 搴忓垪鐨勫瓧鑺?1 鏃犳晥銆?

If you use Windows the user that runs the reports server is usually LocalSystem. Check this in the Windows Services panel.
LocalSystem has no printer access. To be able to print, you have to use a real domain user that has access to the printer. So, change the Log on properties in the Services panel.

Error when running report from form

When i press on the button in form to run the report i get:
Microsoft Visual C++ Runtime library
Runtime Error!
Programm C:\Oracle\DB9iDS\bin\ifweb90.exe
abnormal program termination
What could be the problem?

I just installed the new patch. But now OC4J won't start -i get "-jar: illegal argument":
C:\Program Files\Common Files\System\Mapi\1060\NT>C:\oracle\livo9iDS\jdk\bin\jav
a -Dorg.omg.CORBA.ORBClass=com.inprise.vbroker.orb.ORB -Dorg.omg.CORBA.ORBSingle
tonClass=com.inprise.vbroker.orb.ORB -Doracle.security.jazn.config=C:\oracle\liv
o9iDS\j2ee\Oracle9iDS\config\jazn.xml -Doracle.home=C:\oracle\livo9iDS -DORACLE_
HOME=C:\oracle\livo9iDS -jar C:\oracle\livo9iDS\j2ee\home\oc4j.jar -userThreads
-config C:\oracle\livo9iDS\j2ee\Oracle9iDS\config\server.xml
-jar: illegal argument
usage: java [-options] class
where options include:
-help print out this message
-version print out the build version
-v -verbose turn on verbose mode
-debug enable remote JAVA debugging
-noasyncgc don't allow asynchronous garbage collection
-verbosegc print a message when garbage collection occurs
-noclassgc disable class garbage collection
-ss<number> set the maximum native stack size for any thread
-oss<number> set the maximum Java stack size for any thread
-ms<number> set the initial Java heap size
-mx<number> set the maximum Java heap size
-classpath <directories separated by semicolons>
list directories in which to look for classes
-prof[:<file>] output profiling data to .\java.prof or .\<file>
-verify verify all classes when read in
-verifyremote verify classes read in over the network [default]
-noverify do not verify any class
-nojit disable JIT compiler

When run report from form(6i) on the web,error FRM-921000

While I was trying to run report from form (6i)on the web,it will give me this error
message FRM-921000 and hang.
But when I try to call form using form,I do
not have the problem.
May I know ehat is the cause?
Anybody encounter this before?
Thanks
null

I am running Forms 6i on the web and attempting to call me report via RUN_REPORT_OBJECT. I am getting the same error as Jenny FRM-92100. I need to pass a parameter list so I don't think I can use WEB.SHOW_DOCUMENT. Any ideas???
Thanks,
Jenny N.
<BLOCKQUOTE>quote:<HR>Originally posted by Joseph Schwertner ([email protected]):
Dear Jenny,
I am running reports from Forms 6i on the WEB. I did not encounter your problem. Nevertheless I would like to share the following with you.
RUN_PRODUCT doesn't work for calling reports ON THE WEB. Instead using RUN_PRODUCT do the following:
1. Install Oracle Reports Server
2. For WEB calls of reports use WEB.SHOW_DOCUMENT
3. Learn how to pass parameters to the reports. It is a litlle bit strange, but it is explaint excellent in the documentation to the Reports Server.
I hope this will help you.
Joseph Schwertner
<HR></BLOCKQUOTE>
null

FRM-92101 error while running report from form

HI All,
I am getting the form error FRM-92101 while running report from form menu.My code is given below:
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
BEGIN
repid := FIND_REPORT_OBJECT('REPORT47');
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
IF rep_status = 'FINISHED' THEN
WEB.SHOW_DOCUMENT('http://192.168.0.21:8889/reports/rwservlet/getjobid'||
substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=repserver90','_blank');
ELSE
message('Error when running report');
END IF;
Clear_message;
END;
Clear_message;
--Arif

hi Arif
Please see this note on MOS/Metalink for some common causes of this error:
Known Causes of FRM-92101 Error In Forms [ID 604633.1]
thanks,
AMN

Hi how can print report from form directly

Hi,
I would like to print report from D2k directly....
i.e. suppose we pressed a button report has to be generated and printed automatically.... Generating of report is done by Run_product function, but how to give print directly...
please u send ur valuable suggestions to my mail id also
[email protected]
bye!

When calling the report from form, include 2 more parameters in the parameter list:
- PARAMFORM=No
- DESTYPE=Printer
hth

OAS in Unix: URL not found when run report from Form???? please help

Hi,
We have succesfully install OAS with Form Server and Report Server in
Unix. We able to run Form and Report direct from browser. But we having
problem to run Report from direct Form within the browser. The message from
the browser was 'The requested URL was not found'. We use run_product to run
report from form. Below is the statement:-
Run_Product(REPORTS, 'A10001', SYNCHRONOUS, RUNTIME, FILESYSTEM, pl_id,
NULL);
Does anyone have an idea??
Thanks in advance.
null

please check env. variables
1. FORMS60_MAPPING
2. FORMS60_OUTOUT
FORMS60_MAPPING should point to vartual directory on your forms webserver
FORMS60_OUTPUT should point to physical
directory path of vartual directory
FORMS60_MAPPING
regards
Darshan
[email protected]
<BLOCKQUOTE>quote:<HR>Originally posted by leong([email protected]):
Hi,
We have succesfully install OAS with Form Server and Report Server in
Unix. We able to run Form and Report direct from browser. But we having
problem to run Report from direct Form within the browser. The message from
the browser was 'The requested URL was not found'. We use run_product to run
report from form. Below is the statement:-
Run_Product(REPORTS, 'A10001', SYNCHRONOUS, RUNTIME, FILESYSTEM, pl_id,
NULL);
Does anyone have an idea??
Thanks in advance.
<HR></BLOCKQUOTE>
null

Getting rep-3002 when calling report from form on web

i am getting rep-3002 when i call report from a form on web environment. Report is in character mode. It is coming proper if i change it to bitmap. but my requirement is of character mode. pl. give some solution.

Hello,
If you are running in WinNT/2000 environment, the NT/2000 user which runs the Report Server service must have a printer defined. In the control panel, look at the properties for the Report Server to see what user it runs as. Log in as that user and make sure a default printer is defined.
Regards,
The Oracle Reports Team --skw

Getting   FRM-41029   when calling report from form

Hi
I have following procedure to run the report but its running fine but giving error FRM-41029 when calling the report from the form.
runrep('MATREP,'REPSER','PDF','F:\rec\RepEnt.RDF');
Repid := FIND_REPORT_OBJECT(repobj);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE, RUNTIME);
set_report_object_property(repid, REPORT_SERVER, repserv);
set_report_object_property(repid, REPORT_COMM_MODE, SYNCHRONOUS);
set_report_object_property(repid, REPORT_DESTYPE,'file');
set_report_object_property(repid, REPORT_DESFORMAT,repfor);
set_report_object_property(repid, REPORT_FILENAME,repfile);
rgds
soumya

hi
try something like this.
PROCEDURE sarah ( p_report_name varchar2, vParamValue number ) is
l_param_list paramlist;
l_rep_id      report_object;
l_rep_job     varchar2(100);
l_rep_status varchar(100);
BEGIN
l_param_list := Get_parameter_List('tmp');
IF NOT Id_Null(l_param_list ) THEN
Destroy_parameter_List( l_param_list );
END IF;
l_param_list := Create_parameter_List('tmp');
add_parameter(l_param_list ,'p_num',text_parameter,to_char( vParamValue ));
l_rep_id := FIND_REPORT_OBJECT( p_report_name );
if
     id_null ( l_rep_id )
then
msg ( 'There is no Report ' || p_report_name || ' in form ' || name_in ( 'system.current_form' ) );
raise form_trigger_failure;
end if;
SET_REPORT_OBJECT_PROPERTY(l_rep_id, REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(l_rep_id, REPORT_DESTYPE,cache);
SET_REPORT_OBJECT_PROPERTY(l_rep_id, REPORT_DESFORMAT,'PDF');
SET_REPORT_OBJECT_PROPERTY(l_rep_id, REPORT_OTHER, 'paramform=no');
l_rep_job := RUN_REPORT_OBJECT( l_rep_id, l_param_list );
l_rep_status := REPORT_OBJECT_STATUS( l_rep_job );
WHILE l_rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
l_rep_status := report_object_status( l_rep_job );
END LOOP;
WEB.SHOW_DOCUMENT('http://sarah:8889/reports/rwservlet/getjobid'||substr(l_rep_job,instr(l_rep_job,'_',-1)+1) || '?server=repserver', '_blank');
END; then u may call the procedure something like this.
when-button-pressed trigger.
begin
sarah ('REPORT6', :block.item );
end;sarah
Edited by: S@R@h on Nov 30, 2009 9:39 PM

Error while running report from Form. i am using Forms 10g.

dear all,
here is a problem when running the report from a fom. gives the pollowing error.
REP-110: Unable to open file 'f:\oracle\accano\gl\coa_list.rdf'.
REP-1070: Error while opening or saving a document.
REP-0110: Unable to open file 'f:\oracle\accano\gl\coa_list.rdf'.
i am using Forms 10g.
thanks
Muhammad Nadeem

See metalink doc id 215469.1
The purpose of this document is to:
- provide information on how to resolve the REP-110 error.
- give hints on how to troubleshoot problem.
- include a comprehensive summary of various scenarios which may
result in a REP-110 error

Page fault error while calling reports from forms

dear friends.
when a report is called from forms, just before opening up of background engine the application gets hanged with page fault. One has to forcibly shut down the application before loggin again.
The error mesage generated from log file is
Fatal NI connect error 12203, connecting to:
(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle80)(ARGV0=oracle80orcl)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))')))(CONNECT_DATA=(SID=orcl)(CID=(PR OGRAM=C:\ORAWIN95\BIN\RWRBE60.EXE)(HOST=SOUMYADIP)(USER=Soumya))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 8.0.5.0.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 8.0.4.0.0 - Production
Time: 06-MAY-00 14:03:32
Tracing not turned on.
Tns error struct:
nr err code: 12203
TNS-12203: TNS:unable to connect to destination
ns main err code: 12560
TNS-12560: TNS:protocol adapter error
ns secondary err code: 0
nt main err code: 102
TNS-00102: Keyword-Value binding operation error
nt secondary err code: 0
nt OS err code: 0
After closing if we run the report next time it runs, but after 3/4 attempts the above error again occurs.
Please Help
Prashant

I'm getting this also. I thought it was
due to my use of DATA PARAMETER. I've
logged TARS on this and have yet to hear
back from Oracle.
Maybe if enough of us get the error Oracle
will give some guidance on this one.

Urgent: Getting FRM-41211 when calling reports from forms for first time.

Hi,
We are running into the FRM-41211 error, when the users try to call a report from a form. The report is called from a form in SYNCHRONOUS mode. This is the only report that is being called. No other report is
running at that time when the users get this error. This is happening only the first time when they try to call the report from the form. After getting this error, when they click on OK, and when they try to call this
report again, the report works fine.
Any ideas?? It's urgent...
Thanks
Vamshi.
null

Maybe try to use "run_report_product"?

When calling report from forms, only html format report can show chinese characters

To all experts,
When I run report by calling run_report_object() in forms, only html format can show chinese characters. If I choose pdf format, garbage characters were shown instead of chinese characters. My settings on server are as follows:
NLS_LANG=TRADITIONAL CHINESE_HONG KONG.UTF8
FORMS60_REPFORMAT=PDF
Do you know why? I hope to print report in PDF format as PDF turned out to be more regular in format. Is there any additional settings required?
May experts here broaden my mind?
Richard

You have two different ways of generating Japanese PDF files from Reoprts. One is font aliasing and the other is font subsetting.

You will need to have the following entries in uiprint.txt (example).
[ PDF ]
.....JA16SJIS = "KozMinPro-Regular-Acro"
"MS UI Gothic".....JA16SJIS = "KozMinPro-Regular-Acro"
You may need to download and install Japanese Font Pack from Adobe's web site (if your Acrobat is non-Japanese version).

You will need to add C:\WINNT\Fonts (or wherever your TTF/TTC fonts are installed) to your REPORTS_PATH.
You will also need to have the following entries in uiprint.txt (example).
[ PDF:Subset ]
"Andale Duospace WT J" = "Aduoj.ttf"
"Albany WT J"="AlbanWTJ.ttf"
"MS UI Gothic" = "msgothic.ttc"

Error running 9i reports from forms.

Hi folks,
i am having problems running 9i reports from a form.
i have installed Oracle 9iDS on a Win XP machine with 256 MB RAM and a Pentium 1.4Ghz processor.
i also have a local Oracle 9i database. i have created several reports that i am trying to run from some forms but all efforts to date have failed.
below is some sample code.
declare
v_rid report_object;
v_rjob varchar2(100);
v_rptstatus varchar2(100);
v_jobid varchar2(100);
BEGIN
/*get handle to report object itself*/
v_rid := find_report_object('pbranchlist');
set_report_object_property(v_rid,REPORT_EXECUTION_MODE,BATCH);
set_report_object_property(v_rid,REPORT_DESFORMAT,'htmlcss');
set_report_object_property(v_rid,REPORT_DESTYPE,'CACHE');
set_report_object_property(v_rid,REPORT_SERVER,'repsrv');
set_report_object_property(v_rid,REPORT_COMM_MODE,synchronous);
v_rjob := run_report_object(v_rid);
v_rptstatus := report_object_status(v_rjob);
while v_rptstatus in ('RUNNING','OPENING_REPORT','ENQUEUED') loop
     v_rptstatus := report_object_status(v_rjob);
     message(v_rptstatus);
end loop;
if v_rptstatus = 'FINISHED' then
     /*display report in browser*/
--      web.show_document('http://steve:8888/reports/rwservlet/getjobid'||
--      substr(v_rptsvrjob,instr(v_rptsvrjob,'_',-1)+1)||'?'||'server=repsrv','_blank');
web.show_document('/reports/rwservlet/getjobid'||substr(v_rjob,instr(v_rjob,'_',-1)+1)||'?'||'server=repsrv','_blank');
else
     message('error running Report');
end if;
end;
pbranchlist is defined in the form,
repsrv is a report server i installed and explicitly started.
on clicking the button to run the above code, i get a message on the browser status bar as follows
opening http://steve:8888/reports/rwservlet/getjobid11?server=repsrv...
that's it. it stays like that forever and a progress bar showing the status of the operation gets to the halfway mark and stays there for up to 15 minutes.
I eventually halted the operation by clicking the stop button of the browser. The form then becomes totally non-responsive with the mouse indicator changing to the hour-glass shape and a small vertical bar moving rapidly back and forth at the bottom of the form window.
My only recourse then is to explicitly close the browser window.
I have already configured Reports to run in non single sign-on mode by setting SINGLESIGNON=NO in the rwservlet.properties file.
Is there anything i have not done properly?
Thanks in advance.

Steve,
can you check the Reports cache directory if the Reports file got created? I would assume yes, but better check.
Frank

Error when printing reports from forms in Linux

Similar Messages

Maybe you are looking for