Error when publishing topology after adding persistent chat
Hello everyone.
I could use some help, if anyone has some pointers.
I have Lync 2013 Standard running perfectly - everything works fine (a/v, chat, app sharing, etc).
I want to add a persistent chat server, so I set up a Lync Enterprise FE server and created a new pool.
I set up a SQL 2012 Server for the backend, and created a separate instance for Chat. I changed the ports in SQL manager, opened the ports, added the FQDN as a C Name to DNS. Added it to Lync.
Every time I try to publish the topology, I get an error that the machine I'm publishing isn't found in AD.
(If I remove the chat server, I can publish the topology without issue.)
Any ideas?
Thanks!
Candee
I'm a little confused. Did you set up a Lync Enterprise Front end just for persistent chat or for another reason? You wouldn't need a separate FE pool which is what confused me there.
Why are you using a DNS CNAME? Is that for the SQL server? Why not just use the real FQDN? If you're using a cname in the topology builder, than that's likely why it's complaining, because there's no AD object with that actual
name in AD.
I might have misunderstood though, can you clarify?
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.
Similar Messages
-
Error when Refresh Planning after adding attribute V9.2.1
Has anyone encountered this and what is the solution:
Added new attribute dimension in planning web and added attribute members. When I try to do incremental or full refresh, receive error message:
Errors detected (AssocAttrDimension, 1060057) Could not associate attribute with member (attribute,member) Decanatura, Career -2147218881
Career is the dimension and Decanatura is the attribute added
Using 9.2.1
Thanks
JeffHi Jeff,
please find some findings from planning DBAG which may be useful to resolve your issue:
You can assign attributes only to sparse dimensions.
You cannot assign attributes to label-only members.
After you create attributes and attribute values, you can assign attribute values to each member of the dimension.
You must assign attribute values to dimension members at the same member level within a dimension.
You can define attribute values for Entity, user-defined custom dimensions, and Account
members if the Account dimension is designated as a sparse dimension in all plan types. You
can then assign attribute values to members of a dimension.
Attribute values for an attribute must be assigned to the same-level sparse dimension members.
Assigning an attribute value to another level causes an error during the application refresh.
hope this helps.
www.dornakal.blogspot.com
Edited by: Dornakal on May 28, 2009 5:55 AM -
Window error when publishing Muse change, can't pubish page update
Window error when publishing Muse change, can't pubish page update. Any suggestions?
It happens after I updated my website payment page with a new Paypal html. That html is below with x's put in to the code. Why doesn't Muse or Windows like this code in Muse?
<script type="text/javascript" data-pp-pubid="9xxxxx6cec" data-pp-placementtype="540x200"> (function (d, t) {
"use strict";
var s = d.getElementsByTagName(t)[0], n = d.createElement(t);
n.src = "//paypal.adtag.where.com/merchant.js";
s.parentNode.insertBefore(n, s);
}(document, "script"));
</script>Window error when publishing Muse change, can't pubish page update. Any suggestions?
It happens after I updated my website payment page with a new Paypal html. That html is below with x's put in to the code. Why doesn't Muse or Windows like this code in Muse?
<script type="text/javascript" data-pp-pubid="9xxxxx6cec" data-pp-placementtype="540x200"> (function (d, t) {
"use strict";
var s = d.getElementsByTagName(t)[0], n = d.createElement(t);
n.src = "//paypal.adtag.where.com/merchant.js";
s.parentNode.insertBefore(n, s);
}(document, "script"));
</script> -
SharePointDesigner - Error when publishing a workflow
Hi.
When i´m publishing my workflow, sharepoint designer rises the following exception:
"Error were found when compiling the workflow. The workflow files were saved but cannot be run." - "Unexpected error on server associating the workflow."
The workflow is really simple; i used some custom activities (to read details from an attached excel document) and then i have to do many checks and about 12 approvals.
I have recreated the workflow and it seems that adding the 7th approval creates this error; when publishing with 6 approvals everything is fine.
My Question: What is the error, where can i find more information regarding this issue, maybe it´s a bug in designer? Are there any known workarounds that can help? I really need so many approvals :-)
Is there a way to split the workflow in 2 or 3 parts, that can do the "job" of the big one?
I´m using Sharepoint Server 2010 with the current SPD (-> Microsoft Information Worker VM).
Thx for helpI finally found a solution how to solve this issue:
In the web.config file of the current site collection (where i was publishing my workflow) i have appended a timeoutvalue for my requests:
Old entry: <httpRuntime maxRequestLength="51200"/>
New entry: <httpRuntime
maxRequestLength="51200"
executionTimeout="300"
/>
This will give my workflow some more time to publish!
Source: http://www.manjuke.com/2011/05/fixed-sharepoint-designer-error.html -
404 error when publishing to FTP server.
I'm getting the 404 error when publishing my iWeb site to my FTP server. Please help.
It says I have a good connection and publishes but then I get the error when I "Click to go to the site." I've read where I have to upload the file to my server but with the file index_html. Do I rename my iWeb file, domain, to index_html?I'm getting the 404 error when publishing my iWeb site to my FTP server. Please help.
It says I have a good connection and publishes but then I get the error when I "Click to go to the site."
A 404 errors means the file is not on the server.
Checking the connection is just testing the FTP connection.
I've read where I have to upload the file to my server but with the file index_html. Do I rename my iWeb file, domain, to index_html?
Do I rename my iWeb file, domain, to index_html?
No, you don't. The domain file is where iWeb stores its assets. It stays on your computer. It has no meaning outside it. iWeb publishes the index.html file and all the other files.
Read this : The concept of iWeb Sites
So if your pages do not load, check for their presence on the server. -
So I have an applicational prototype that I need to have out by the end of the day today, and all of a sudden Flash Catalyst states that the project cannot be published due to an error. It also said to check the Code view to see what's wrong. Yesterday it did say that the error was a "Java Heap Space" error, but today there is absolutely nothing in the problems listing even though it still outputs that there's an error when publishing the project.
The prototype builds and runs in the browser just fine, but it's publishing that becomes the problem. I am not a Flex developer by any means, but as a user experience designer, I understand how to edit some of the coding, so if anyone could shed some light on this, I will do my best to fix the problem with any solutions that will work.
I appreciate the help guys!
-- RickTo the original poster, Rick:
If you're seeing a "Java Heap Space" error message, this is a (not very user-friendly) way of the program telling you it's running out of memory. Catalyst tries to detect and warn you when your project is getting too large, but it's not always perfect.
Did you see any warnings about the size of the images you've imported into your project? Very large images can certianly be one source of problems.
Here are a few tips for dealing with large images:
Resize them to be smaller using a another app like Photoshop, before you import into Catalyst. Shoot for a file size of 100-300 KB at the most, for very large "gallery"-style photos. Other images should be < 100 KB (remember, people viewing your site will have to download all this).
In Catalyst, when you're done shrinking down an image to the right size, choose Optimize Artwork > Rasterize in the heads-up display to "lock in" the smaller size.
In Catalyst, choose Optimize Artwork > Convert to Linked Image for any especially large photos. This can speed up the initial load time of your site, and it will also help avoid memory problems when publishing.
Hope that helps!
- Peter -
I now get an 500 Internal Server error when loading Firefox, after updating RealPlayer
I now get an 500 Internal Server error when loading Firefox, after updating RealPlayer.
When I try to open Firefox, it opens. But there is the error message.
What is this? How do I did rid of it?
'''bold text'''Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
You can also check the connection settings in Tools > Options > Advanced : Network : Connection<br />
If you do not need to use a proxy to connect to internet then select "No Proxy"
See "Firefox connection settings":
* [[Firefox cannot load websites but other programs can]] -
WorkFlow Error when publishing
Hello,
I am having errors publishing workflows. This was working and all of a sudden stopped. From the error message I am taking it as a permissions issue?
Here is the code it spits out:
System.InvalidOperationException: Operation failed with error System.UnauthorizedAccessException: Attempted to perform an unauthorized operation.
at Microsoft.SharePoint.SPAppPrincipalManager.GetManager(SPWeb web)
at Microsoft.SharePoint.WorkflowServices.SPWebWorkflowSecurityContext.EnsureAppPrincipal(SPWeb elevatedWeb)
at Microsoft.SharePoint.WorkflowServices.SPWebWorkflowSecurityContext.<SetupApplicationEcosystem>b__3()
at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass5.<Run
Anyone have any thoughts? This happens with all sorts of workflows, even basic ones as shown in the above example!
Thanks,
WillHi,
For your issue, Re-register the workflow service using command:
Register-SPWorkflowService -SPSite 'https://myhost/mysite' -WorkflowHostUri 'https://workflowhost' -AllowOAuthHttp -Force
Reopened SharePoint Designer again and test again.
Here are similar posts, you can use as a reference:
https://social.technet.microsoft.com/Forums/en-US/61b2cfad-355d-4a43-8dd6-7d6813cd1b2f/sharepointdesigner-error-when-publishing-a-workflow?forum=sharepointcustomizationprevious
http://sp2013.pro/2013/04/solution-errors-were-found-when-compiling-the-workflow-the-workflow-files-were-saved-but-cannot-be-run-cannot-set-unknown-member/
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support -
Error when registring Provider after finished install the portal.
Error when registring Provider after finished install the portal.
Hi.. we are using Oracle9iAS 9.0.2.0.1, Sun Solaris 8.
Our problem is, after we finished installed the iAS, then open the Portal, and we tried to register a provider, we get these errors:
"You are not authorized to view this page"
"This component ID: 1068970504 has no existing versions - you need to create one first (WWV-01808)"
"Error : Failed to service the client. No further information available"
"Error: The XML parser encountered an Error, and could not complete the conversion for portlet id=6,343, it returned the following message: XML Parsing Error "
can anybody help?...Should we, after the installation, should install any patches?
Thanks.Hi
When you boot from the install disk, before you proceed through the install screens, first go to the Installers menu, and choose Disk Utility. If the internal drive appears, select it and click Repair Disk. See if you get errors, and if Disk Utility is able to correct those errors. If the drive does not appear, you may have serious drive issues which another drive utility (such as DiskWarrior) may be able to correct, but it may be severe enough to necessitate replacing the drive.
Since you've already tried Erase and Install, can I assume you have a backup of any files you need? If not, if you have access to another Mac, can you restart the G5 in Firewire mode (restart with the T key held down) and connect it using a Firewire cable to your other Mac. If the G5's drive appears on the other Mac's desktop, copy across any files you need.
Matt -
i keep getting "an unknown error" when publishing to file or publishing all to mobileme...
It still works if i just publish to mobileme.
Any ideas?
Im trying to get my site going on go daddy, and kinda really need it in a folder...If you are still getting the error then its likely that you have a corrupt domain file.
To prove this, quit iWeb, create a new folder on your desktop and drag your domain file out of - Home Folder/Library/Application Support/iWeb - into this.
Relaunch iWeb to force it to create a new domain file, add some content and try publishing to a folder.
If this works, your original file is corrupt. -
Adobe Captivate 6 Error when publishing
Help! I having trouble publishing a training that my employees can view. When they open the project they are getting the first image here that is essentially blank. I have attempted to reduce the size and save to different folders etc. but nothing seems to work.
Hi there,
Could you tell me the complete version of Captivate (Help > About Adobe Captivate). 6.0.1.240
Which version of Adobe Reader or Acrobat are they using? Adobe Reader XI
Can you publish this locally on your system (not to network drive directly), check force republish option also, and are you able to view it on your end? I can pull up the file from my computer that is saved in the same drive that the agents are attempting to pull up. But, I am not sure if it is viewing for me because I have it on my system.
Re: Adobe Captivate 6 Error when publishing
created by Varun Kalra<http://forums.adobe.com/people/Varun+Kalra> in Adobe Captivate - View the full discussion<http://forums.adobe.com/message/5855412#5855412 -
Publishing error when publishing one section
I am publishing my material per module and receive the following error when publishing one of the modules:
Publishing Activity Log:
Task
GMT Training Guide / Creating numbering styles in document
Path
/49b77e2d-7666-443e-a2fa-edbfc9aa22b2/Parts/pr.oxmlprint.multi.xml
Comment
Processing project failed
Ref. #
-1673847682
All of the other modules publish with no problems.
Any assistance in this regard would be much appreciated.
Thanks,
AngieDid you copy the text in there? Could be the following:
The problem is related to concept frames. Some concept frames have not regular charachters. Those characters aren't visible in the edit mode. The are only visible if you copy the text of the concept frame to word. In word use the button "display unknow characters". It seemed like they will appear if you copy and paste text in the conceptframes.
You need to copy the text of the editor to Word. Click on the button "display unknown characters" to see all characters in text (including e.g.enter and spacebar). Remove the strange characters such as small circles. Copy the text and paste it back into the editor.
Save the editor (and publish again).
Good luck. -
Hi,
I am getting the below error when I am trying to publish existing project back to server after making
changes The error message was The project could not be saved to the server. Please retry
saving the project. If the probelm persists, save the project as a MPP file and contact your system administrator.
I get this error as an admin when other PM tries to publish don't get any error it shows it publish but its not saving any changes made to the project. As
the tasks doesn't appear in Resources timesheets as well.
Any help why?That's weird.. If you published correctly, the timesheet should be populated or at least you should be able to insert the task. Moreover you can see the assignments in the resource assignments page..
Are you sure that the publication was correctly processed, no error message in the queue and the ULS logs?
Have the resources the "New Task Assignment" permission?
Can you try on a blank new project?
The ultimate way will be to delete the task and assignments (or just the assignments) and recreate them.
An intermediate way is to change the assignment owner to another value, publish the project, change back the assignment owner and publish
again the project.
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS | -
Html snippets and unknown error when publishing - the mystery deepens
Can anyone make sense of this?
I have been using iWeb for a year or so. Personal site with added extra goodies like widgets using iweb more.
Upgraded to iWeb 08 with a few formatting problems (which I chose to ignore for now) - after version 2.01 I replaced my iweb more extras with the new html snippet thingy and everything was fine - although I still didn't get around to sorting the formatting issues.
Now we are at 2.02 I decided to use one of the new themes and so I created a new page using golden rod and merrily cut and paste from the existing page. I was loathe to delete the old page until I knew the new one was fine - my plan was then to do a bit of page renaming and voila a newly themed home page. Anyway what I got was;
Unknown error - when the new page was being created.
Ok - deleted the offending page - site now publishes fine -so we know this isn't .mac.
Now I decided to build the new page a bit at a time to see what was causing the problem.
It turns out to be a html snippet (which works fine on my home page still);
div style="text-align:center"
a href="http://outcampaign.org/"
img border="0" alt="image" width="143" src="http://pharyngula.org/images/scarlet_A.png" height="122"/
/a
(I have broken the tags by removing the 's so you can see the text itself)
When I added this to an HTML snippet the unknown error returned.
Now I have deleted it and I still get the unknown error for that page.
So this is definitely an iWeb problem and not a .mac problem.
Any ideas?
Home page;
http://web.mac.com/theedonfamily/Site/Home.htmlwhy do you use the snippet to actually add the thing? you can just place the image directly into iweb and then activate it as a link. (there are some errors in the script as well!)
if you want to use the snippet way, then id just change the code a bit:
+⊗p style="text-align: center;"⊗+
+⊗a href="http://outcampaign.org/"⊗+
+⊗img style="border: none;" alt="Image" width="143" src="http://pharyngula.org/images/scarlet_A.png" height="122" /⊗+
⊗/a⊗
⊗/p⊗
replace every ⊗ with either < or >.
max -
Error message in WebGUI after adding fields with EEWB - Class doesn't exist
Hello!
After adding fields to the component BT111H_OPPT within EEWB and BSP_WD_CMPWB I recieved an error message while trying to open an Opportunity in the WebGUI, stating:
Cannot display view MainWindow
An exception has occured
Exception Class CX_SY_DYN_ILLEGAL_CLASS - Method call of IF_BSP_WD_DYN_RT_REP_SUPPORT~GET_URL_PARAMETERS failed; the class ZL_BT111H_O_BSPWDCOMPONEN_IMPL does not exist
Method: CL_BSP_WD_COMPONENT_FACTORY=>GET_REPOSITORY_XML
Source text Row:25
An exception occured during the activation of target view CUBTOpptOverview.MainWindow for the navigation
An exception has occured
Exceptions Class CX_BSP_WD_RUNTIME_ERROR - View CUBTOpptOverview.MainWindow could not be bound
Method: CL_BSP_WD_VIEW_CONTROLLER=>BIND_VIEW
Source text Row:162
Has any one an idea, if this could be a bug or what went wrong? I am especially irritated, that it seems, that class was not created. After all I never changed any tables or anything in the background manually. I just used the standard tool EEWB, nothing else.
Many thanks for any kind of help!
By the way, I tried to go back all the steps I took previously to, kind of "un-do" my error, but I was not able to delete all created extensions, due to a another error - but that's a different story, or isn't it?
Cheers,
MarekHello Experts,
I know my question was a tricky one and no-one was able to help me from this forum. That's why I would like to share with you the solution I just recieved from SAP:
Although all classes that were created whilst extending the component BT111H_OPPT were deleted, there still existed a seperate extension definition in ViewCluster BSPWDVC_CMP_EXT still persisted.
I wasn't aware of the fact, that I had to delete that too.
Note: in order to delete ViewCluster, use tx SM34
The problem ist now solved!
Cheers!
Marek
Maybe you are looking for
-
Suddenly having problems with my Canon C1 printer from our two Macs running on 10.6.4. Using Canon IPr server Q1.1(UK) driver. • Quark files are printing out with elements missing. Usually text. This is also happening when we export the file to PDF -
-
Ok I bought a SB X-Fi extreme music in Feb and installed on my PC which had been running fine for some months. I recently had to re-format and reinstall XP. I updated Windows first and then put the X-Fi software on. I did this FIVE times, each time a
-
Hi, I need to make a database designer type application. Where there are floating list boxes that can be moved around. Each of the list boxes will represent a tables and you can drag relationships between the list boxes which will create a line map
-
Hi I would like to know if you can convert decimal to binary using actionscript 3.0?
Hi I would like to know if you can convert decimal to binary using actionscript 3.0?
-
Levels, Threshold and other image compression not working
I am trying to hyper compress the tonal range of a noise layer in order to get speckles, but I cannot get any of the adjustments to stick. They preview correctly, but once they are applied the image reverts to it's original state. The adjustment is l