Error when registering service to ESB server

Hello, I try to register a service on ESB from jDeveloper, but I get a "Error 500" message back. From the log on the ESB I see:
<PAYLOAD>
<MSG_TEXT>Exception occured while enqueuing control event</MSG_TEXT>
<SUPPL_DETAIL><![CDATA[javax.jms.ResourceAllocationException: allocateConnection: javax.resource.spi.ResourceAllocationException: [b]Unable to allocate new connection - pool is full and timed out waiting for a connection to be freed up.
at oracle.j2ee.ra.jms.generic.RAUtils.make(RAUtils.java:525)
I've just tried to restart the whole server, but I still have the same problem.

Here is the complete log snip:
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2007-10-08T17:00:26.343+02:00</TSTZ_ORIGINATING>
<COMPONENT_ID>tip</COMPONENT_ID>
<MSG_TYPE TYPE="NOTIFICATION"></MSG_TYPE>
<MSG_LEVEL>1</MSG_LEVEL>
<HOST_ID>oslsoad1</HOST_ID>
<HOST_NWADDR>10.47.136.65</HOST_NWADDR>
<MODULE_ID>esb.console</MODULE_ID>
<THREAD_ID>32</THREAD_ID>
<USER_ID>SYSTEM</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>1191855325:10.47.136.65:4708:836:23</UNIQUE_ID><SEQ>1</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>Rollback starting ++++++++++++++++</MSG_TEXT>
</PAYLOAD>
</MESSAGE>
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2007-10-08T17:00:26.343+02:00</TSTZ_ORIGINATING>
<COMPONENT_ID>tip</COMPONENT_ID>
<MSG_TYPE TYPE="NOTIFICATION"></MSG_TYPE>
<MSG_LEVEL>1</MSG_LEVEL>
<HOST_ID>oslsoad1</HOST_ID>
<HOST_NWADDR>10.47.136.65</HOST_NWADDR>
<MODULE_ID>esb.console</MODULE_ID>
<THREAD_ID>32</THREAD_ID>
<USER_ID>SYSTEM</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>1191855325:10.47.136.65:4708:836:23</UNIQUE_ID><SEQ>1</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>Cleaning up the txn dir in rollback</MSG_TEXT>
</PAYLOAD>
</MESSAGE>
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2007-10-08T17:00:28.625+02:00</TSTZ_ORIGINATING>
<COMPONENT_ID>tip</COMPONENT_ID>
<MSG_TYPE TYPE="ERROR"></MSG_TYPE>
<MSG_LEVEL>1</MSG_LEVEL>
<HOST_ID>oslsoad1</HOST_ID>
<HOST_NWADDR>10.47.136.65</HOST_NWADDR>
<MODULE_ID>esb.console</MODULE_ID>
<THREAD_ID>32</THREAD_ID>
<USER_ID>SYSTEM</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>1191855325:10.47.136.65:4708:836:23</UNIQUE_ID><SEQ>1</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>Unable to get connection to Repository
Ensure repository is accessible</MSG_TEXT>
</PAYLOAD>
</MESSAGE>
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2007-10-08T17:00:30.828+02:00</TSTZ_ORIGINATING>
<COMPONENT_ID>tip</COMPONENT_ID>
<MSG_TYPE TYPE="ERROR"></MSG_TYPE>
<MSG_LEVEL>1</MSG_LEVEL>
<HOST_ID>oslsoad1</HOST_ID>
<HOST_NWADDR>10.47.136.65</HOST_NWADDR>
<MODULE_ID>esb.console</MODULE_ID>
<THREAD_ID>32</THREAD_ID>
<USER_ID>SYSTEM</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>1191855325:10.47.136.65:4708:836:23</UNIQUE_ID><SEQ>1</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>Unable to get connection to Repository
Ensure repository is accessible</MSG_TEXT>
</PAYLOAD>
</MESSAGE>
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2007-10-08T17:00:33.235+02:00</TSTZ_ORIGINATING>
<COMPONENT_ID>tip</COMPONENT_ID>
<MSG_TYPE TYPE="ERROR"></MSG_TYPE>
<MSG_LEVEL>1</MSG_LEVEL>
<HOST_ID>oslsoad1</HOST_ID>
<HOST_NWADDR>10.47.136.65</HOST_NWADDR>
<MODULE_ID>esb.console</MODULE_ID>
<THREAD_ID>32</THREAD_ID>
<USER_ID>SYSTEM</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>1191855325:10.47.136.65:4708:836:23</UNIQUE_ID><SEQ>1</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>Unable to get connection to Repository
Ensure repository is accessible</MSG_TEXT>
</PAYLOAD>
</MESSAGE>
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2007-10-08T17:00:35.439+02:00</TSTZ_ORIGINATING>
<COMPONENT_ID>tip</COMPONENT_ID>
<MSG_TYPE TYPE="ERROR"></MSG_TYPE>
<MSG_LEVEL>1</MSG_LEVEL>
<HOST_ID>oslsoad1</HOST_ID>
<HOST_NWADDR>10.47.136.65</HOST_NWADDR>
<MODULE_ID>esb.console</MODULE_ID>
<THREAD_ID>32</THREAD_ID>
<USER_ID>SYSTEM</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>1191855325:10.47.136.65:4708:836:23</UNIQUE_ID><SEQ>1</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>Unable to get connection to Repository
Ensure repository is accessible</MSG_TEXT>
</PAYLOAD>
</MESSAGE>
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2007-10-08T17:00:37.611+02:00</TSTZ_ORIGINATING>
<COMPONENT_ID>tip</COMPONENT_ID>
<MSG_TYPE TYPE="ERROR"></MSG_TYPE>
<MSG_LEVEL>1</MSG_LEVEL>
<HOST_ID>oslsoad1</HOST_ID>
<HOST_NWADDR>10.47.136.65</HOST_NWADDR>
<MODULE_ID>esb.console</MODULE_ID>
<THREAD_ID>32</THREAD_ID>
<USER_ID>SYSTEM</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>1191855325:10.47.136.65:4708:836:23</UNIQUE_ID><SEQ>1</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>Unable to get connection to Repository
Ensure repository is accessible</MSG_TEXT>
</PAYLOAD>
</MESSAGE>
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2007-10-08T17:00:37.611+02:00</TSTZ_ORIGINATING>
<COMPONENT_ID>tip</COMPONENT_ID>
<MSG_TYPE TYPE="ERROR"></MSG_TYPE>
<MSG_LEVEL>1</MSG_LEVEL>
<HOST_ID>oslsoad1</HOST_ID>
<HOST_NWADDR>10.47.136.65</HOST_NWADDR>
<MODULE_ID>esb.console</MODULE_ID>
<THREAD_ID>32</THREAD_ID>
<USER_ID>SYSTEM</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>1191855325:10.47.136.65:4708:836:23</UNIQUE_ID><SEQ>1</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>Rollback Failed due to Rollback called with no active Transaction</MSG_TEXT>
</PAYLOAD>
</MESSAGE>
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2007-10-08T17:00:37.611+02:00</TSTZ_ORIGINATING>
<COMPONENT_ID>tip</COMPONENT_ID>
<MSG_TYPE TYPE="ERROR"></MSG_TYPE>
<MSG_LEVEL>1</MSG_LEVEL>
<HOST_ID>oslsoad1</HOST_ID>
<HOST_NWADDR>10.47.136.65</HOST_NWADDR>
<MODULE_ID>esb.console</MODULE_ID>
<THREAD_ID>32</THREAD_ID>
<USER_ID>SYSTEM</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>1191855325:10.47.136.65:4708:836:23</UNIQUE_ID><SEQ>1</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>Commit Failed due to Timed out</MSG_TEXT>
<SUPPL_DETAIL><![CDATA[javax.transaction.RollbackException: Timed out
     at com.evermind.server.ApplicationServerTransaction.checkForRollbackOnlyWhileInCommit(ApplicationServerTransaction.java:633)
     at com.evermind.server.ApplicationServerTransaction.doCommit(ApplicationServerTransaction.java:273)
     at com.evermind.server.ApplicationServerTransaction.commit(ApplicationServerTransaction.java:162)
     at com.evermind.server.ApplicationServerTransactionManager.commit(ApplicationServerTransactionManager.java:472)
     at oracle.tip.esb.console.XMLConsoleManagerImpl.commit(XMLConsoleManagerImpl.java:2316)
     at oracle.tip.esb.configuration.deployment.JDevDeploymentManager.deploy(JDevDeploymentManager.java:223)
     at oracle.tip.esb.configuration.deployment.DeploymentServlet.doPost(DeploymentServlet.java:120)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
     at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:396)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:623)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)
]]></SUPPL_DETAIL>
</PAYLOAD>
</MESSAGE>

Similar Messages

An error when registering SQL server driver

Hi
I have got the following error when register SQL server drive
"RemoteMsDataBase.java": Error #: 302 : cannot access class com.microsoft.jdbc.sqlserver.SQLServerDriver; neither class nor source found for com.microsoft.jdbc.sqlserver.SQLServerDriver at line 19, column 63
the code that cause error
// register the SQL driver
DriverManager.registerDriver(new com.microsoft.jdbc.sqlserver.SQLServerDriver());
// connect to the DB by using the driver.
String connString = "my_dbserver:1433;databasename=my_database";
String strDBConnect = "jdbc:microsoft:sqlserver://" + connString;
conn = DriverManager.getConnection(strDBConnect, userName, passwd);
To include jars to my classpath do this:
javac -deprecation -classpath msbase.jar;msutil.jar;mssqlserver.jar *.java

javac -deprecation -classpath msbase.jar;msutil.jar;mssqlserver.jar *.javaSpecify the full path for jar(s), example,
javac -deprecation -classpath .;c:\myjars\msbase.jar;c:\myjars\msutil.jar;c:\myjars\mssqlserver.jar *.java
Hope it works.
Sudha

Error when sending message: 500 Internal Server Error

Hi
IE is not accepting any messages,
when I try to send the messgae to the IE ( using RWB) i am getting the below error " Error when sending message: 500 Internal Server Error".
following things what i have noticed.
1. Pipleline URL is fine, both in the BS of XI and in the RFC destnation which i am maintaing on the IE admin) URL is "http://<host>:8000/sap/xi/engine?type=entry"
2. SICF all the XI serivess are up and running, i am able to test these service.
3. The http port is active ( SMICM )
Pls note the error is 500 Internal Server Error
regards
Nisar

I think in a simple term 500 can be said as "the request cannot be processed curretnly", these options mentieoned by you are not applicable in my case.
This generally occurs due to load problem or if you are on an SP less than 12 or even if there is an administration problem---I am on PI7.0 , what are the administration problem you are talking about?
1 Check Table Space is enough. ---i had installed server recently & very few interface running.
2 Server licence Date or Time. In this case change system date and restart server.---i have recently installed server.
3 Check the service pack levels on your XI. If it is obsolete upgrade it with latest versio----Can u explain more on this?
Try restart the java stack(XI Server) and follwing services.
com.sapii.af.app ---I am not passing trough Adater framework, so i dont think this service will matters....
com.sapii.cpa.af.app.---CPA cahe is done sucessfully, as i said i am not passsing through adapter framework.
basically for a simple HTTP post what might cause 500 error if all necessary services are up and running?
regards
Nisar

Fatal error when trying to backup SharePoint server (Failed to set request to pause search application)

I have powershell script that is used to backup SharePoint server. It was working correctly until last week. I found this error message indicate that search application cannot be paused. I don't know what happen and what should I do to solve this issue.
Please help me find solution for this.
[20/1/2557 18:53:53] FatalError: Object Search Service Application failed in event OnBackup. For more information, see the spbackup.log or sprestore.log file located in the backup directory.
InvalidOperationException: Failed to set request to pause search application

Hi,
According to your post, my understanding is that you got an error when you backup your SharePoint Server.
You can do the steps below, then check whether it works.
Look for any One-time timer job for Backup/Restore and delete it (From Central Administration > Monitoring > Review Job Definitions)
Clear the timer cache following the below link:
http://blogs.msdn.com/b/jamesway/archive/2011/05/23/sharepoint-2010-clearing-the-configuration-cache.aspx
Run the below command from the SharePoint Management Shell:
$ssa = Get-SPEnterpriseSearchServiceApplication –Identity <SearchServiceApplicationName>
Suspend-SPEnterpriseSearchServiceApplication -Identity $ssa
Once the above steps are completed successfully start the full farm backup from the Central Administration > Backup and Restore > Farm Backup
Once backup is completed run the below command to resume the SSA
$ssa = Get-SPEnterpriseSearchServiceApplication –Identity <SearchServiceApplicationName>
Resume-SPEnterpriseSearchServiceApplication -Identity $ssa
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Error when registering a portlet provider

I got the following error when registering a new portlet provider:
An error occurred when attempting to call the providers register function. (WWC-43134)
The following error occurred during the call to Web provider: 301: Moved Permanently (WWC-43147)
May I know what I may have done wrong?
I was able to open the portlet provider page by itself
Thanks

Can you double check whether the provider node is accessible from the portal middle tier (ping)?

JVM Initialization Error when Starting the Second Managed Server

Hi,
I am getting the below error when starting the 2nd Managed server on Solaris X86 machine.
starting weblogic with Java version:
java version "1.5.0_17"
Java(TM) Platform, Standard Edition for Business (build 1.5.0_17-b04)
Java HotSpot(TM) Client VM (build 1.5.0_17-b04, mixed mode, sharing)
Starting WLS with line:
/usr/jdk/instances/jdk1.5.0/bin/java -client -Xms256m -Xmx512m -XX:CompileThre shold=8000 -XX:PermSize=48m -XX:MaxPermSize=128m -Xverify:none -da -Dplatform .home=/beafiler/weblogic10g/bea/wlserver_10.0 -Dwls.home=/beafiler/weblogic10g/b ea/wlserver_10.0/server -Dweblogic.home=/beafiler/weblogic10g/bea/wlserver_10.0/ server -Dwli.home= -Dweblogic.management.discover=false -Dweblogic.management.s erver=http://test_admin:7001 -Dwlw.iterativeDev=false -Dwlw.testConsole=false - Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=/beafiler/weblogic10g/bea/patch_wss 110/profiles/default/sysext_manifest_classpath:/beafiler/weblogic10g/bea/patch_w lw1021/profiles/default/sysext_manifest_classpath:/beafiler/weblogic10g/bea/patc h_wls1002/profiles/default/sysext_manifest_classpath:/beafiler/weblogic10g/bea/p atch_cie640/profiles/default/sysext_manifest_classpath -Dweblogic.security.provi ders.authentication.LDAPDelegatePoolSize=50 -Dweblogic.Name=wls_test2 -Djava.sec urity.policy=/beafiler/weblogic10g/bea/wlserver_10.0/server/lib/weblogic.policy weblogic.Server
Error occurred during initialization of VM
Could not reserve enough space for object heap
Can any one please help me troubleshoot this?
Edited by: user4877326 on Jul 13, 2010 1:33 PM

Hi P.k,
The table QRTZ92_TRIGGERS is there in the database.But while trying to run this command (UPDATE QRTZ92_TRIGGERS set NEXT_FIRE_TIME=1 where NEXT_FIRE_TIME < 0)in database i am getting the table or view does not exist.
What is GTC resource?
OIM version - 11.1.1.5.0.
-Deena.

SRT Framework exception: ICF: Error when creating service node. [rc:wrong_icf_name] No special characters allowed in name

Hi,
I have created a web service in SAP ECC from a RFC.
While configuring the web service in SOA management to publish it, getting error SRT Framework exception: ICF: Error when creating service node. [rc:wrong_icf_name] No special characters allowed in name
How to resolve the same.
Thanks
Tanmay

Hello Tanmay,
Are you including quotes (') in the name, I assume not?
Regards,
Siddhesh

Error when getting service facade : Service manager initialization failed I

Dear Friends,
we have created entities in CAS((nwds 7.0.1)) and deployed in J2ee.
During Testing:
when we right click on entity and click on test.
service Browser. is opening with two Buttons.
One Button it is " start with CAF source".
when we select this its throwing error
Error text:
Error when getting service facade : Service manager initialization failed Illegal argument exception: Unable to create javax.ejb.EJBObject. because of this we are unable to test the entity.
request to throw pointers to clear this error.
Answers will be rewared.
Regards
shekar chandra

even if go using this url http://hostnae:portname/caf
i could see the main page then i click TestTools->Service browsser, Still lso i am getting the same screen with Buttons.
one saying "Start with CAF Source" @ other "Start with ABAP
Source"
If .ear is one of the cause I have removed all the projects from DC->.dtr.Now my NWDS is empty.
Still why it is comming.
Regards
Shekar Chandra

Error when creating service node. [rc:special_service_error]

Hi,
I have updated or created Inbound Service Interface in PI ISR, but when i acitivate the SI in SPROXY, the following message raised:""Error when creating service node. [rc:special_service_error] Method: ServiceCreate; return code: 3 Exception of class CX_SRT_WSP_ICF",
anyone can solve this issue,thanks?
Gongtao

Please check with your SAP Security Team if you have complete authorization/roles to generate proxies.
See related issue on this link: Inbound Proxy Error - JDBC to PROXY Scenario
Regards,
Jenny

403 error when registering proxy server (non-central AE)

Hi all.
I'm getting 403 error when trying to register proxy server in my local non-central Adapter Engine. When listing the ProxyServer servlet available commands (http://host:port/ProxyServer/), it says that "xi_jpr_register_bindings" security role is required, but my local UME has not that role.
Thanks,
Gari.

Thanks a lot Prateek.
Your reply was very helpful because it works now. One of the configuration steps in the page says to use the Security Provider service of the Visual Administrator to verify that some security roles are assigned to the appropriate user groups. The Scurity Roles section (inside Security Provider service) in my Visual Administrator does not show the roles and groups directly. I had to navigate to ProxyServer and MessagingSystem components so that the roles and groups where visible to me and assign them to my user.
Should I see them into Security Roles section directly? The roles and groups are not visible from User Management Section.
Thanks again.
Gari.

Error when re-starting an SQL Server Instance from VBA - [SQL-DMO]Service Control Error: Access is denied.

Our Application needs to have the use of the [Named Pipes] and [TCP/IP] Protocols. To save our Users the hassle of having to enable them manually our application has always done it for them and then stopped and restarted SQL Server. However
since the advent of Vista and Windows 7, the restart stopped working. We solved the problem by detecting the failure to re-start and giving Users sufficient instructions for them to do it themselves. Since this only occurs during installation on
the Server, this approach has not been too much of a hassle. However we would like to tidy this up if possible. This the VBA code that is causing the problem:
    obj_SQLServerInstance2.Start _
        g_SQL_UseWindowsAuthentication, _
        SQLServerInstance, _
        UserName, _
        Password
This still works when run under XP, but fails under Windows 7 with the Error:
[SQL-DMO]Service Control Error: Access is denied.
Does anyone know how to resolve the problem?

This still works when run under XP, but fails under Windows 7 with the Error:
[SQL-DMO]Service Control Error: Access is denied.
Hello Brian,
Under Windows 7 you have to run the VBA script with admin permission, a normal user don't have permissions to start/stop services.
Olaf Helper
[ Blog] [ Xing] [ MVP]

RFC connection error when registering PROGRAM ID.

Hi,
I created a RFC connection of type T.
I gave the following parameters ->
gateway host: hostname and then ip-address
gateway service: sapgwxx
Registered program id: xxx
It is giving me the following error:
Error Details     Error when opening an RFC connection
Error Details     ERROR: program sapgwxx not registered
Error Details     LOCATION: SAP-Gateway on host <hostname> / sapgwxx
Error Details     DETAIL: TP sapgwxx not registered
Error Details     COMPONENT: SAP-Gateway
Error Details     COUNTER: 2696
Error Details     MODULE: gwr3cpic.c
Error Details     LINE: 1777
Error Details     RETURN CODE: 679
Error Details     SUBRC: 0
Error Details     RELEASE: 700
Can anyone help me in troubleshooting the issue.
Also I am not able to register this program id in Visual Admin -> Services -> JCo RFC Provider. Here it is giving me an error. Can anyone guide me in this?
Points to be rewarded for any kind of small help.

Thanks Ramesh.
I followed the blog. Here are the steps that I did.
RFC destination:
1. To create the RFC go to TCODE: SM59 <b>-> Done</b>2. Create new destination of type T (TCP/IP) <b>-> Done</b>
3. Make sure you select Registered Server Program option before writing your program ID <b>-> Done</b>
4. Write you program ID (remember it's case-sensitive) <b>-> gave the SID name</b>
5. In the gateway host and gateway service write the values of your "Application system" - business system (not the XI server) <b>-> Typed the gateway hostname and gateway service "sapgw<instance no>", that I got from SMGW.</b>
But still I face the same problem. It get the following error:
Logon     Connection Error
Error Details     Error when opening an RFC connection
Error Details     ERROR: program <SID name> not registered
Error Details     LOCATION: SAP-Gateway on host xxxxx / sapgwxx
Error Details     DETAIL: TP <SID Name> not registered
Error Details     COMPONENT: SAP-Gateway
Error Details     COUNTER: 2719
Error Details     MODULE: gwr3cpic.c
Error Details     LINE: 1777
Error Details     RETURN CODE: 679
Error Details     SUBRC: 0
Error Details     RELEASE: 700
Error Details     TIME: Thu Nov 1 10:39:43 2007
Error Details     VERSION: 2
Kindly help me out.

Error when I startup the Weblogic server.

Hi
Look I chance my proxy configuration 'Cause before I have a free LAN to navigate on internet. Since then, when I want to startup the weblogic service the following error :
Enter username to boot WebLogic server:weblogic
Enter password to boot WebLogic server:
<14-sep-2010 20H08' PET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<14-sep-2010 20H08' PET> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<14-sep-2010 20H08' PET> <Notice> <Log Management> <BEA-170019> <The server log file /u01/oracle/user_projects/domains/CoreNevadoDomain/servers/CoreNevadoAdminServer/logs/CoreNevadoAdminServer.log is opened. All server side log events will be written to this file.>
<14-sep-2010 20H08' PET> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<14-sep-2010 20H08' PET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<14-sep-2010 20H08' PET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
*<14-sep-2010 20H14' PET> <Error> <Deployer> <BEA-149205> <Failed to initialize the application '01-eng-CoreNevadoEngine' due to error weblogic.application.ModuleException: Exception preparing module: EJBModule(engine-CoreNevadoEngine.jar)*
*[EJB:011025]The XML parser encountered an error in your deployment descriptor. Please ensure that your DOCTYPE is correct. You may wish to compare your deployment descriptors with the WebLogic Server examples to ensure the format is correct. The error was:*
*ParseError at [row,col]:[5,148]*
Message: Tried all: '2' addresses, but could not connect over HTTP to server: 'www.oracle.com', port: '80'..
weblogic.application.ModuleException: Exception preparing module: EJBModule(engine-CoreNevadoEngine.jar)
[EJB:011025]The XML parser encountered an error in your deployment descriptor. Please ensure that your DOCTYPE is correct. You may wish to compare your deployment descriptors with the WebLogic Server examples to ensure the format is correct. The error was:
ParseError at [row,col]:[5,148]
Message: Tried all: '2' addresses, but could not connect over HTTP to server: 'www.oracle.com', port: '80'.
at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:454)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:58)
Truncated. see log file for complete stacktrace
javax.xml.stream.XMLStreamException: ParseError at [row,col]:[5,148]
Message: Tried all: '2' addresses, but could not connect over HTTP to server: 'www.oracle.com', port: '80'
at com.sun.xml.stream.XMLReaderImpl.next(XMLReaderImpl.java:560)
at weblogic.ejb.container.dd.xml.EjbDescriptorReaderImpl.isDTDBased(EjbDescriptorReaderImpl.java:451)
at weblogic.ejb.container.dd.xml.EjbDescriptorReaderImpl.parseWLDD(EjbDescriptorReaderImpl.java:525)
at weblogic.ejb.container.dd.xml.EjbDescriptorReaderImpl.processWeblogicEjbJarXML(EjbDescriptorReaderImpl.java:388)
at weblogic.ejb.container.dd.xml.EjbDescriptorReaderImpl.createReadOnlyDescriptorFromJarFile(EjbDescriptorReaderImpl.java:196)
Truncated. see log file for complete stacktrace
>
14-sep-2010 20:14:48 com.sun.faces.config.ConfigureListener contextInitialized
INFO: Initializing Sun's JavaServer Faces implementation (1.2_03-b04-FCS) for context '/console'
14-sep-2010 20:14:48 com.sun.faces.config.ConfigureListener contextInitialized
INFO: Completed initializing Sun's JavaServer Faces implementation (1.2_03-b04-FCS) for context '/console'
********* Oracle® BPM - WorkSpace Administrator (Version 10.3.1.0.0 Service Pack 1 Build #94375) is starting *********
Checking Java Runtime Enviroment ...Ok
Initializing enviroment...Ok
Loading Plugins for Workspace Administrator ...Ok
log4j:WARN No appenders could be found for logger (com.sun.faces.config.ConfigureListener).
log4j:WARN Please initialize the log4j system properly.
OpenLog: verbosity level = 2
OpenLog: Registered application name: OpenControls.srvapptest
OpenControls.srvapptest
help me,plz.
Thanks

Hi,
You can write it inside your ManagedServers Start Script or even you can write it in your "setDomainEnv.sh"(if u are in UNIX OS) or in "setDomainEnv.cmd (if it is WINDOWS)"as described in the below Image:
http://weblogic-wonders.com/weblogic/wp-content/uploads/2010/09/setting_JAVA_JOME_In_script.jpg
The Only difference will be....in the JAVA_OPTION as below:
Unix OS case below
*JAVA_OPTIONS=${JAVA_OPTIONS} -Dhttp.proxyHost=YourProxyHostName -Dhttp.proxyPort=yourProxyPort*
Windows OS Case below
set JAVA_OPTIONS=%JAVA_OPTIONS% -Dhttp.proxyHost=YourProxyHostName -Dhttp.proxyPort=yourProxyPort
Thanks
Jay SenSharma

Problem in soademo registering FulfillmentESB with ESB Server

Hi,all
I am a beginner in soa suite. Now I am stuck in a problem about registering FulfillmentESB module with ESB Server in soademo. The ESB registeration summary dialog display this error message:
Entity Deployment Failed
error code: 1003 : 5
summary: Failed to create System "Fullfillment"
Fix: Ensure that the (a) Repository is available. (b) The Connection information for the Repository is Valid. Also verify the detailed cause of error if available. Contact Oracle Support if error not fixable.
Then I try to enter the ESB Control from the SOA page. After logon, I can't see anything in the ESB Control. It seems like the ESB IS is not connecting to the backend DB. But How can I solve this problem?
Any help would be appreciated!
Peter

Dear Martin,
First of all I should thank for your attention. In order to save time, I should say that another thread is started regarding this problem, so to have a better focus I am inserting messages that may give some clues here too.
1. Regarding service OLITE, I should say that there is no service with this name. I think it is because I have used recommendations of soademo and used oracleXE database. If I'm right.
2.I am using DHCP, and all of the things are installed on my laptop, and there would be no need to other network resources.
3.In hosts file there is only one line :
127.0.0.1 localhost
4.Windows firewall has been activated but some exceptions have been available.
The exact messages in log files are followed:
default_group_home_default_group-1:1.Unable to create a connection to "karimi_vaio/192.168.32.55:12,601" as user "null".
javax.jms.JMSException: Unable to create a connection to "karimi_vaio/192.168.32.55:12,601" as user "null"
2.<2007-04-28 00:53:27,859> <ERROR> <collaxa> <ProcessJob::execute> Timed out reading http://karimi_vaio:8888
oc4j\log :1.deployment failed with error
2.Entity Deployment Failed
Thanks in advance

Error when try to install exchange Server 2013 in windows server 2008 R2 Sp1

Hi
I'm getting these errors while trying to install Microsoft Exchange Server 2013 on my Windows Server 2008 R2 SP1 the user i'm using is the Administrator and it is already a member of "Enterprise
Admins" and "Schema Admins"
in my organization there is 6 Exchange server 2013 in 3 site windows server 2012 in this case
I have to install exchange 2013 in windows Server 2008 r2 sp1
the functional level 2008 R2 I getting these errors please help.
Errors:
This computer doesn't belong to a valid Active Directory site. Check the site and subnet definitions.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.InvalidADSite.aspx
Error:
A reboot from a previous installation is pending. Please restart the system and then rerun Setup.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.RebootPending.aspx
Error:
There is a pending reboot from a previous installation of a Windows Server role or feature. Please restart the computer and then run Setup again.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.PendingRebootWindowsComponents.aspx
Error:
You must be a member of the 'Organization Management' role group or a member of the 'Enterprise Admins' group to continue.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.GlobalServerInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install or upgrade the first Mailbox server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedBridgeheadFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install the first Client Access server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedCafeFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install the first Client Access server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedFrontendTransportFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install or upgrade the first Mailbox server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedMailboxFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install or upgrade the first Client Access server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedClientAccessFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install the first Mailbox server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedUnifiedMessagingFirstInstall.aspx
Error:
Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency. See the Exchange setup log for more
information on this error.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.AdInitErrorRule.aspx
Error:
Either Active Directory doesn't exist, or it can't be contacted.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.CannotAccessAD.aspx

I think it's from subnet in site and services
have 3 site A,B,C and new site is "D"I have problem in "D" site
A subnet is 10.33.50.0/24 AD 2012 ,exchange 2013
B subnet is 10.35.50.0/24 AD 2012 ,exchange 2013
C subnet is 10.36.50.0/24 AD 2012 ,exchange 2013
D subnet is 10.100.100.0/25 AD 2008 ,exchange 2013 error when install it
find event error
The description for Event ID 6 from source MSExchange CmdletLogs cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair
the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
test-SetupPrerequisites
{Roles={LanguagePacks, Bridgehead, ClientAccess, UnifiedMessaging, Mailbox, FrontendTransport, Cafe}, LanguagesAvailableToInstall=True, DomainController=, CustomerFeedbackEnabled=True, ExchangeVersion=15.0.847.32, LanguagePackDir=D:\Exchange
Server Software, SufficientLanguagePackDiskSpace=True, ADInitError=Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites
or by rep, ScanType=PrecheckInstall, LanguagePackVersioning=True, HostingDeploymentEnabled=False, TargetDir=C:\Program Files\Microsoft\Exchange Server\V15, SetupRoles={LanguagePacks, AdminTools, Bridgehead, ClientAccess, UnifiedMessaging, Mailbox, FrontendTransport,
Cafe}}

Error when registering service to ESB server

Similar Messages

Maybe you are looking for