Error when rendering for Flash

I have had two projects crash when rendering an Encore CS3 project.
The info in the data collection is:
AppName: adobe encore.exe AppVer: 3.0.1.8 ModName: dvacore.dll
ModVer: 2.0.0.60016 Offset: 0008bdb3
Any clues?

OK... I use Premiere Pro and then encode files with an application called Cinema Craft for m2v files. These are loaded into Encore and authored for dvd, tested and all work fine.
With two projects, encore crashes with the error I mentioned in my first post. Others have gone through fine but are consistent with how I always create projects.
I do work with a Matrox RXT.100 board with PP2.0 and have seen posts that PP CS# does not like rxt.100. This should not have any bearing on projects that are exported into m2v or wav and then imported into Encore CS3.
Is it best NOT to export into an mgp format and let Encore transcode video?
If more info is needed I would be glad to supply.

Similar Messages

Float4() causes "error saving Pixel Bender Byte Code file" error when exporting for flash player

Simple test
<languageVersion : 1.0;>
kernel untitled
<   namespace : "Your Namespace";
    vendor : "Your Vendor";
    version : 1;
>
    input image4 src;
    output pixel4 dst;
    void
    evaluatePixel()
        dst = float4(sampleNearest(src, outCoord()));
The above code will produce a "error saving Pixel Bender Byte Code file" error when exporting for flash player in Pixel Bender Toolkit 2.5.449694.
"dst = (sampleNearest(src, outCoord()));" works fine. And anything like "float4 a= float4(b);" will give same error.

Thank you for the error report. I'll put it into our bug database. We're bottling things up for the current version. Gven the workaround, it is unlikely we'll be addressing this bug soon. Please accept my apologies for the annoyance this will cause.
In your second example, float4 a = float4(b), does it return an error if b is only a float4 or regardless of what b is? If b is a scalar float, for example, is the conversion performed correctly? If so, this could be an error that only crops up when using constructor/conversion syntax when the thing being converted is already the correct type.
Thanks,
Chuck.

Error when rendering! Desperately in need of help!

Just out of nowhere I´m getting this error when rendering in a ProRes project:
"Codec not found. You may be using a compression type without the corresponding hardware card"
I have done nothing with my setup and have never had problems with this before. What can I do to fix this?

I started getting this error after exporting prores 422 (and 422 HQ) files from AE and dropping them into FCP. It happened a couple of days ago, right after I updated to QT 7.6.2. i checked out the details on the QT update and the update seems to focus on prores 422 functionality. so i think your theory about this having something to do with the update is spot on.
my solution was to export out of AE using photo-jpeg. it's pretty close to identical on the visual and color correctable if not. this project has the flexibility for this type of codec switch since everything originates in AE -- you may not have that flexibility.

Dynamic text not displaying when publishing for flash 8

This dynamic text works fine when the movie is published for
flash 7, but when i export for the flash 8 player it seems to be
invisible. Is there any obvious reason for this happenning?
thanks
jon

Ok, thanks, looks like you've pointed me in the right
direction. I havent fixed it yet though. Heres where i am at:
eval(theTarget+".buttonPrime").tex.embedFonts = false;
now i can see my text. of course its using a default font.
var my_fmt:TextFormat = new TextFormat();
my_fmt.font = "arial14b";
eval(theTarget+".buttonPrime").tex.embedFonts = true;
eval(theTarget+".buttonPrime").tex.text = "wasssup?";
eval(theTarget+".buttonPrime").tex.setTextFormat = my_fmt;
this isnt working. I have added a font object to the library
and linked it for actionscript using the monkier "arial14b".
however my text is quite invisible. i have checcked, 'export in
first frame' for the font object i even tried it with this
deselected. i have deselected the embed font option on the text
feild itself. that doesnt work either (unless i dont try to set the
text format, so long as i accept a default font, its fine).
so err, help?
confused
jon
ps further to this is have discovered more about this strange
behaviour. i can set the text to a different string, provided i do
not try to embed the font in any way. if i set the font to embed, i
can have the text display with the correct font, until i change the
text. then it dissappears. also i cannot seem to affect properties
like font size by means of my TextFormat object. the textFormat
object also does not seem to affect the font of the text.
in short, when exporting for flash 8, i cannot seem to
successfully embed fonts for dynamic text. the only thigs i have
gotten to work are: static text (or a dynamic text feild with
unchanged text) with an embedded font, or dynamic text with a
default font.

Error when searching for entries in secure store

Hi All,
I need to assign the certificate in the sender agreement for signature verification and decrpting. So when i search for entries, i am getting the error as " Error when searching for entries in Secure Store".
Details of the Error is showing as:
Service call exception; nested exception is: com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (401) Unauthorized.
What is the reason for the above error and how to rectify it..?
Suggest some useful solution
Regards
Prakash

Hi All,
Can anyone suggest some ways to rectify the error, as i am not able to find solution for the error in the
forum.
Regards
Prakash

Error when compiling for IOS

When compiling for IOS in Standard mode an error ocurred:
Error occurred while packaging the application:
Exception in thread "main" com.adobe.air.ipa.ProcessError: Assembler failed
          at com.adobe.air.ipa.AOTCompiler.launchProcess(AOTCompiler.java:263)
          at com.adobe.air.ipa.AOTCompiler.compileBitcode(AOTCompiler.java:935)
          at com.adobe.air.ipa.AOTCompiler.trimAndCompileBitcode(AOTCompiler.java: 763)
          at com.adobe.air.ipa.ASMGenerator.main(ASMGenerator.java:72)
Compilation failed while executing : ADT
Flex 4.6
Windows 7
Any idea?

Sinious thanks for your answer.
I tried compiling from adt and it worked using this command line script.
@set java_cmd="C:\Program Files\Common Files\Adobe\Adobe Flash CC\jre\bin\java.exe"
@set java_param=-Xmx8192m -jar
@set adt_cmd="C:\Program Files\Adobe\Adobe Flash CC\AIR4.0\lib\adt.jar"
@set target=ipa-test
@set cert=samples.p12
@set cert_pass=12345
@set provisioning=samples.mobileprovision
@set build_file=Testing.ipa
@set desc_files=Testing-app.xml
@set files=Testing.swf assets externalSWF
%java_cmd% %java_param% %adt_cmd% -package -target %target% -storetype pkcs12 -keystore %cert% -storepass %cert_pass% -provisioning-profile %provisioning% %build_file% %desc_files% %files%
pause
Still there is now a different problem.
When trying to compile more than a certain number of external swfs (eg. 350) then the process never ends. The java.exe process consumes all of my memory and it is just stuck there for hours( I've waited for it to compile for nearly 10 hours before I killed the java.exe process). When I randomly remove some swfs then everything goes fine and the process finishes after nearly half an hour or so.
The pc i'm using has an i7 processor with 16gb of ram and the java process consumes it all even though i've set a limit using the -Xmx8192m command.
Is there a problem with the xmx command?
Do i need even more ram to compile a larger number of swfs.
Is there a way to monitor the java process in order to catch any errors that occur or maybe use any different java params to control ram usage limits?
Thank you for your help.

File Not Found Error When Rendering Motion Menu

Hi there.
I'm attempting to render a motion menu and keep getting the error "file not found". All of the necessary files are available and no specific missing file is mentioned.
The background video is a .m2v, and there is a .wav audio file too. They are 42 seconds long.
I tried other Encore projects and 2 others are doing the same thing, or coming up with a 'General Error'.
I have cleaned the Database in the Media Cache. I have uninstalled and reinstalled Encore. There are no updates available.
Any suggestions?
Thanks,
David

Yeah, it would have taken me quite a while to redo the menus completely! So I was very thankful for the save to menu template option.
When I (not recently, thank goodness!) have a project I suspect of corruption, I create a new project, and just "import as menu" from the old menu subdirectory. The method you used deletes the menus, so exporting the menus helps.
Mac OS 10.6.8
That's Snow Leopard, right?
Actually, I'm not really sure about Encore terminology (this was my first project), but the only motion I have in my menus is the line that appears under the button text when that button is highlighted. At one point I had the photo buttons (for videos) set to animate, but I removed that option.
A highlight is just a highlight, not "motion." Animated buttons, when rendered as the menu, are actually a video background, so that was a motion menu.
All 30 slideshows are actually individual video timelines. They were created and exported from Photosho Lightroom 3.
In Encore terminology, those are just videos - many Encore users choose to do slideshows as videos.
I had originally tried creating each one as a slideshow from within Encore, but I was DEEPLY dismayed by how slow Encore became, evetually locking up at least once per hour. It was ridiculous, even taking into account the fact that it is not a 64-bit program. I planned to leave 2 of the songs as Encore slideshows (Lightroom can't do Pan/Zoom), but in the end I had to replace them with mp4s because the slideshows just would not play. Really, it was about 11 wasted days plus 4 productive days to get me through the project!
Encore has a variety of problems with slideshows, but I suspect from your description that you were using very large images. Scaling them down a bit can improve performance.

Error: No renderer for extension png

content is not appearing in the publish instance. The Publish error.log has this message for all the resources
Here's a snippet of the error log
/content/asthmastudy/en/welcome.navimage.png HTTP/1.1] org.apache.sling.servlets.get.impl.DefaultGetServlet No renderer for extension png, cannot render resource JcrNodeResource, type=gskstudy/components/page/contentpage, superType=null, path=/content/asthmastudy/en/welcome/jcr:content
29.01.2013 10:33:22.752 *ERROR* [10.10.0.14 [1359473602752] GET /content/asthmastudy/en/about.navimage.png HTTP/1.1] org.apache.sling.servlets.get.impl.DefaultGetServlet No renderer for extension png, cannot render resource JcrNodeResource, type=gskstudy/components/page/contentpage, superType=null, path=/content/asthmastudy/en/about/jcr:content
29.01.2013 10:33:22.752 *ERROR* [10.10.0.14 [1359473602752] GET /content/asthmastudy/en/participants.navimage.png HTTP/1.1] org.apache.sling.servlets.get.impl.DefaultGetServlet No renderer for extension png, cannot render resource JcrNodeResource, type=gskstudy/components/page/contentpage, superType=null, path=/content/asthmastudy/en/participants/jcr:content
29.01.2013 10:33:22.752 *ERROR* [10.10.0.14 [1359473602752] GET /content/asthmastudy/en/locations.navimage.png HTTP/1.1] org.apache.sling.servlets.get.impl.DefaultGetServlet No renderer for extension png, cannot render resource JcrNodeResource, type=gskstudy/components/page/contentpage, superType=null, path=/content/asthmastudy/en/locations/jcr:content
29.01.2013 10:33:22.752 *ERROR* [10.10.0.14 [1359473602752] GET /content/asthmastudy/en/aboutdisease.navimage
I've activated a numbe of branches on the tree to the publish instance.
What would cause this error to appear?
ltemplin

There's nothing overriding it but when activating that branch - /libs/foundation/components/primary/cq/Page a error appears - NullPointerException and the branch fails to activate. The error log starts with:
at org.apache.jsp.libs.cq.replication.components.treeactivation.POST_jsp$Processor.process(P OST_jsp.java:172)
          at org.apache.jsp.libs.cq.replication.components.treeactivation.POST_jsp$Processor.process(P OST_jsp.java:284)
          at org.apache.jsp.libs.cq.replication.components.treeactivation.POST_jsp$Processor.process(P OST_jsp.java:284)
          at org.apache.jsp.libs.cq.replication.components.treeactivation.POST_jsp$Processor.process(P OST_jsp.java:142)
          at org.apache.jsp.libs.cq.replication.components.treeactivation.POST_jsp._jspService(POST_js p.java:473)
          at org.apache.sling.scripting.jsp.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
          at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
          at org.apache.sling.scripting.jsp.jasper.servlet.JspServletWrapper.service(JspServletWrapper .java:419) and continues from there for another 60 lines
I'm using CQ 5.4, Java version 1.6.0_34-b04
Luke

Getting choppy footage when rendering plus "flash" frames

Hi all,
I've been using Final Cut Pro 7 for about two years for casual video editing. I use H.264 files with a framerate of 24fps and I always set sequences to fit the native format of the video files I use in them. Today, I noticed an odd "bug" when rendering video files. It's a bit hard to explain, but I'll try my best.
Let's say I take a 5-second clip from an hour-long video file and place it in the timeline. I cut off a bit of the end and add some keyframes to adjust the opacity. I then render this small piece. However, upon playback, the footage appears to "stagger", and even the playhead appears to pause for a moment before continuing on. This is confusing to me, because the footage is rendered properly, so shouldn't it play normally, like the unedited segment of the clip?
I've also had a problem with getting "flashes" of a frame that isn't meant to be in said clip. When I scroll over the clip using the playhead, this "flashing" frame is nowhere to be found.
I'm using Mountain Lion (10.8.5).
Can anyone lend a hand with this? Thanks in advance.

David and Ian are absolutely correct in their posts about the problems with trying to work with h264 quicktimes in fcp. But the issues you are having may also have something to do with your frame rate.
Do you mean 24 fps or 24P? 24p is actually 23.976 frames per second. Most US video is 29.97 fps and 23.976 fps is a relatively easy conversion to 29.97 fps using "pulldown." Early DSLR's sometimes shot exactly 24 or 30 frames per second. New DSLR's now shoot 23.976 and 29.97. Unfortunately, spec sheets don't always describe the frame rate accurately. 24 fps is not a standard video frame rate and there can be problems putting a 24 fps clip in a 24p sequence.
Here's a user tip describing these frame rate issues in greater detail
https://discussions.apple.com/docs/DOC-4731
If any of this isn't clear, post back. It's complicated.

VCS Expressway event log errors when Jabber for iPhone and Windows log in

hi folks,
I've deployed Collaboration Edge with VCS Control and Expressway:
my Jabber for iPhone succesfully can log in from Internet and it can IM but not calls and I see next messages in VCS Expressway when Jabber is logging in:
2015-03-27T18:00:28+02:00
tvcs: Event="Authentication Failed" Service="SIP" Src-ip="Client-in-the-Internet-IPaddress" Src-port="49543" Detail="No valid authentication" Protocol="TLS" Method="REGISTER" Level="1" UTCTime="2015-03-27 16:00:28,204"
2015-03-27T17:58:55+02:00
tvcs: Event="Authentication Failed" Service="SIP" Src-ip="Client-in-the-Internet-IPaddress" Src-port="49535" Detail="No valid authentication" Protocol="TLS" Method="REGISTER" Level="1" UTCTime="2015-03-27 15:58:55,786"
2015-03-27T17:58:32+02:00
tvcs: Event="Authentication Failed" Service="SIP" Src-ip="Client-in-the-Internet-IPaddress" Src-port="49527" Detail="No valid authentication" Protocol="TLS" Method="REGISTER" Level="1" UTCTime="2015-03-27 15:58:32,202"
2015-03-27T17:58:08+02:00
tvcs: Event="Inbound TLS Negotiation Error" Service="SIP" Src-ip="Client-in-the-Internet-IPaddress" Src-port="49512" Dst-ip="Expressway-IPaddress" Dst-port="5061" Detail="No SSL error available, probably remote disconnect" Protocol="TLS" Level="1" UTCTime="2015-03-27 15:58:08,582"
"Digest User" in the "Protocol Specific Information" section of Phone Configuration selected right user. in this Jabber I see following error "Failed to get device configuration". however Jabber for Windows and for Android hasn't such issues - they succesfully can log in from Internet and it can do calls and IM but I see next messages in VCS Expressway when Jabber is logging in. The same log line appears when Jabber for Android log in:
tvcs: Event="Inbound TLS Negotiation Error" Service="SIP" Src-ip="Client-in-the-Internet-IPaddress" Src-port="56751" Dst-ip="Expressway-IPaddress" Dst-port="5061" Detail="No SSL error available, probably remote disconnect" Protocol="TLS" Level="1" UTCTime="2015-03-27 14:19:11,769"
and I can't find any information which describe such types of error.
thanks!

Thanks Srini, but the instructions have two options:
1. Use the Control Panel, select "Oracle 11g..." and uninstall from there.
This is of course the first thing I tried, but as I said, there is no entry for Oracle 11g in my "Programs and Features" applet.
2. Download the install package and run OracleXE.exe with the remove iss file.
Firstly, there is no OracleXE.exe in the package I downloaded, just setup.exe;
Secondly, setup.exe ignores the iss parameter and tells me that OracleXE is already installed (setup.log contains ResultCode=-3) so it can't be installed.
Is there somewhere else to get an OracleXE.exe that will work for 11g? Or are these the instructions for 10g and haven't been updated yet?
Am I unusual in not having a Control Panel entry?
(and I understand this is a beta - that's partly why I'd like to uninstall it - I'll go back to 10g and not be so impatient :))
Regards,
Andrew

Error When Prompting for Substitution Variable

Hi - I'm receiving an error when I try to run the following using the substitution variable - but only when I enter a string; when I enter a numeric value it runs fine.
DECLARE
    l_SCR_Info            VARCHAR2(50) := '''SCR'||&SCR_NUM||'-'||'''';
begin
dbms_output.put_line(l_SCR_Info);
end;Here is the error I receive when I supply a string value when prompted:
ORA-06550: line 3, column 52:
PLS-00201: identifier 'AB' must be declared
ORA-06550: line 3, column 27:
PL/SQL: Item ignored
ORA-06550: line 10, column 22:
PLS-00320: the declaration of the type of this expression is incomplete or malformed
ORA-06550: line 10, column 1:
PL/SQL: Statement ignoredCan anyone shed some light on what I'm missing here?
Thanks!
Christine

Hi,
It looks like you just want one string there:
l_SCR_Info            VARCHAR2(50) := '''SCR&SCR_NUM-''';Remeber how substitution variables work: SQL*Plus replaces them with values before sending the code to the back end to be compiled.
If you give a value like AB for the variable, the code you posted is equivalent to:
     l_SCR_Info            VARCHAR2(50) := '''SCR'|| AB ||'-'||'''';by the time it reaches the compiler. AB is not inside quotes, so the compiler looks for a variable or function called AB.
If you gave a number:
     l_SCR_Info            VARCHAR2(50) := '''SCR'|| 123 ||'-'||'''';there's no problem; the compile knows what the literal number 123 is.

Error when enrolling for a class

Users receive this error when they click on enrol.
You have encountered an unexpected error. Please contact the System Administrator for assistance.
Click here for exception details.
About Previous Page
Can someone please help.

This is very Generic Error. Check the setup once again. Ask DBA to bounce the apache once.
Thanks

ORA-01841 Error when value for date col is NULL in .dat (using SQL Loader)

Hello Gurus,
I have some data in .dat file which needs to be loaded into oracle table. I am using SQL * Loader to do the job. Although "NULLIF col_name =BLANKS" works for character datatype, but when value for date col is NULL then I get ORA-01841 error. I have to make NULL for all rows withour value for date column
Early reply will be highly appreciated
Farooq

Hi,
May be this problem is not with the NULLIF. The value for the date column is not in proper date format.
create table:
create table kk (empno number, ename varchar2(20), deptno number, hiredate date)
Control file:
LOAD DATA
INFILE 'd:\kk\empdata.dat'
insert into TABLE kk ( empno position (1:2) integer external,
ename position(4:5) char NULLIF ename=BLANKS,
deptno position (7:8) integer external NULLIF deptno=BLANKS,
hiredate position (10:20) date NULLIF hiredate=BLANKS)
data file:
10 KK 01-jan-2005
20 10
SELECT * FROM KK;
EMPNO ENAME DEPTNO HIREDATE
10 KK 01-JAN-05
20 10
Verify the data file.
Hope it will help

N95 Error when updating Adobe Flash player

On my Nokia N95, the Adobe Flash lite player got the version 2.0 built in (that version do not support Flash application ver. 8)
So I tried to update the player on the Adobe web site to Flash Lite 2.1 for Symbian and even tried to install the plug-in Flash Lite 2.1 for Flash Professional 8, but each time, it give me the error message : unable to install. Component already built in. So I would like to know if it's possible to update the Adobe Flash lite player ver. 2 to ver. 2.1 ?
Thanks in advance for any help.

You should look for the Nokia Software Updater and upgrade your device firmware, this will include Flash Lite 3.0
Regards,
Mark
www.flashmobileblog.com

ERROR:HDLParsers:3370 Compile Error when compiling for NI-5640R

I'm trying to get a FFT Core working inside the NI-5640R FPGA. In my latest debugging step, I have received the following error when compiling:
Compiling vhdl file "C:/NIFPGA82/srvrTmp/LOCALH~1/IFBC3E~1/bushold.vhd" in Library work.
Entity <bushold> compiled.
ERROR:HDLParsers:3370 - "C:/NIFPGA82/srvrTmp/LOCALH~1/IFBC3E~1/bushold.vhd" Line 142. Value 0 is not included in the range, 1 to 2147483647, of kConfiguration_ClkMaxWidth.
ERROR:HDLParsers:3370 - "C:/NIFPGA82/srvrTmp/LOCALH~1/IFBC3E~1/bushold.vhd" Line 143. Value 0 is not included in the range, 1 to 2147483647, of kConfiguration_ClkCounterWidth.
Has anybody seen this before? I am including my FPGA VI that is causing this error (FFT (FPGA).vi). I am also including my previous step in debugging the FFT that worked (FFTworking (FPGA).vi).
Attachments:
FFT (FPGA).vi ‏125 KB
FFTworking (FPGA).vi ‏119 KB

Hi,
The main cause of this error message is the large array size. You configured a 16-bit fixed-size array with 4096 element for a total array size of 65536 (16 * 4096). Array uses a lot of FPGA resource and the general recommendation to limit the use and size of array as much as possible on the FPGA VI. This VI will certainly overmap the FPGA resource because of the large array size.
Although this error message is not directly related to the array size, it has however been reported to R&D (#4G3COBJ0) for further investigation. A possible workaround would be to reduce the size of the array or use DMA FIFO to pass the data to the host.
Thanks for the feedback!
Tunde A.
LabVIEW FPGA

Error when rendering for Flash

Similar Messages

Maybe you are looking for