Error when restarting admin server
I'm testing clustering with WL 6.1.
I have one machine acting as the admin server and the EJB server and a
second machine clustered with it as another EJB server. When I restart
the non-admin machine everything works flawlessly. When I restart the
admin machine the other machine shows this error:
<Jan 28, 2002 10:09:49 AM PST> <Emergency> <Configuration Management> <Errors de
tected attempting to connect to admin server at http://e420:7001 during initiali
zation of managed server ( 10.1.1.62:7001 ). The reported error was: < null > Th
is condition generally results when the managed and admin servers are using the
same listen address and port.>
any clues? They are running on different machines so I don't really
know what to make of this.
Raj Alagumalai <[email protected]> writes:
> Chad,
>
> Can you try specifying the different IP addresses in the Listen
> address field on the console for both the servers.
>
>
> This will bind each server to that particular ip address.
>
> Thanks
>
>
> Raj Alagumalai
> Developer Relations Engineer
> BEA Support
>
Thanks, I figured it out: I was running one WL instance on one machine
that was both admin and a cluster server. I simply didn't understand
the error message.
now I'm getting this about every 7 seconds:
####<Jan 30, 2002 11:25:48 AM PST> <Debug> <Cluster> <db450> <core.62> <ExecuteT
hread: '11' for queue: 'default'> <> <> <000000> <dropped fragment from foreign
domain/cluster domainhash=-324669072 clusterhash=556877810>
>
> Chad McDaniel wrote:
>
> > I'm testing clustering with WL 6.1.
> > I have one machine acting as the admin server and the EJB server and
> > a
>
> > second machine clustered with it as another EJB server. When I restart
> > the non-admin machine everything works flawlessly. When I restart the
> > admin machine the other machine shows this error:
> > ---
>
> > <Jan 28, 2002 10:09:49 AM PST> <Emergency> <Configuration Management> <Errors de
> > tected attempting to connect to admin server at http://e420:7001 during initiali
> > zation of managed server ( 10.1.1.62:7001 ). The reported error was: < null > Th
> > is condition generally results when the managed and admin servers are using the
> > same listen address and port.>
> > ---
> > any clues? They are running on different machines so I don't really
>
> > know what to make of this.
> >
Similar Messages
-
"Not an executable or is a link" errors when starting Messaging Server
"Not an executable or is a link" errors when starting Messaging Server
<P>
If Calendar Server 3.x has been installed to the same server root
as Messaging server, it is possible that the command 'NscpMail start'
to restart the server will return a string of errors:
# /etc/NscpMail start
19971207145610:Dispatch:Notification:Local Module
(Account-Handler) is not a n executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Account-Manager) is not a n executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(AutoReply-Handler) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Configuration-Manager) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Error-Handler) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Mailbox-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Program-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(SMTP-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(SMTP-Router) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(UNIX-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(Finger-Server) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(IMAP4-Server) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(POP3-Server) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(SMTP-Accept) is not an executable or is a link.
Module not loaded.
Startup Problem:
Module Error-Handler is required for proper operation.
Netscape Messaging Server Exiting!
The Calendar server 3.x installation may have changed the permissions
on [server-root]/bin directory from 755 to 750. Simply issue the
command (as root) 'chmod 755 [server-root]/bin' and then start
the server with the 'NscpMail start' command, and it should start
without a problem."Not an executable or is a link" errors when starting Messaging Server
<P>
If Calendar Server 3.x has been installed to the same server root
as Messaging server, it is possible that the command 'NscpMail start'
to restart the server will return a string of errors:
# /etc/NscpMail start
19971207145610:Dispatch:Notification:Local Module
(Account-Handler) is not a n executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Account-Manager) is not a n executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(AutoReply-Handler) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Configuration-Manager) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Error-Handler) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Mailbox-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Program-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(SMTP-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(SMTP-Router) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(UNIX-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(Finger-Server) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(IMAP4-Server) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(POP3-Server) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(SMTP-Accept) is not an executable or is a link.
Module not loaded.
Startup Problem:
Module Error-Handler is required for proper operation.
Netscape Messaging Server Exiting!
The Calendar server 3.x installation may have changed the permissions
on [server-root]/bin directory from 755 to 750. Simply issue the
command (as root) 'chmod 755 [server-root]/bin' and then start
the server with the 'NscpMail start' command, and it should start
without a problem. -
Do we need to restart admin server evertime we restart slapd process
Hi all !
For system stability Do we need to restart admin server evertime we restart slapd process ?
-Recently i had some core dump file on my /var/core directory which is actually filling out the filesystem.
When i send core dump file to sun support they told there is a bug in Directory server BUG ID 4992815.
But to fix the core dump every time need to restart slapd process i need to restart the admin server.
It seems strange to me ...but if its how i can fix the dump then i need to follow thier instruction...
Just curious whether other people also following the same ...
Thank you for your response.... -
Error when restarting ias6.5 in cluster.....
There are 2 application servers and two ldaps configured in different machines.
(i.e) 1 app server and ldap in a single machine
same configuration in different machine.
When restarting application server, some error was thrown like ,
KAS was unable to detect any engines....
and could not connect to ldap.....
I found out that both the application server was starting at the same time.
I gave a 3 minutes interval between application servers and then tried to restart the app server and it worked fine.
I want to know whether starting or restarting application servers in cluster at the same time cause problem????Senthil
We should not start both the appservers at the same when they are in cluster. Split-brain condition occurs if you start the appservers at the same time.
If you are starting them accidentally, there is a setting in cluster configuration to avoid this split-brain.
Set the AutoRestartServerForSplitPrimaries=1
You can find this key under
SOFTWARE\iPlanet\Application Server\6.5\Clusters\<Nameof Cluster>
Create one if you don't have one. This key restarts the appserver one by one if if detects split-brain.
-Srinivas -
Username password error when ifolder admin access admin page
OS: SLES 10 SP4 i586 + online updates
OES2 SP3 + online updates.
Today, I was configuring a POC demo of iFolder to a customer, and faced the following:
iFolder configured with MS AD 2003, and initial configuration(simias-server-setup, ifolder-admin, ifolder-web) went smooth, without errors. But I can't login via ifolder admin(ifadmin) user when accessing Admin Page(http://ip/admin) I got incorrect username password error.
As already informed, that iFolder configuration went smooth(error free) and iFolder Administrator account, plus iFolder Proxy accounts are all available in MS AD 2003, also I have provided the
appropriate DN during configuration(but still I am getting 'username password' error when accessing admin page).
logs says following:
2011-12-01 16:31:18,403 [Simias Manager Start] INFO Simias.Service.Manager - "Simias Change Log Service" service started.
2011-12-01 16:31:18,404 [Simias Manager Start] INFO Simias.Service.Manager - "Simias Local Domain Provider" service started.
2011-12-01 16:31:18,422 [Simias Manager Start] INFO Simias.Service.Manager - "Simias iIdentity Sync Provider" service started.
2011-12-01 16:31:18,426 [Simias Manager Start] INFO Simias.Service.Manager - "Simias Journal" service started.
2011-12-01 16:31:18,470 [Simias Manager Start] INFO Simias.Server.Service - Could not load the configured user provider - loading InternalUser
2011-12-01 16:31:19,580 [Simias Manager Start] INFO Simias.Service.Manager - "Simias Server" service started.
2011-12-01 16:31:19,582 [Simias Manager Start] INFO Simias.Service.Manager - "Simias Report" service started.
2011-12-01 16:31:19,584 [Simias Manager Start] INFO Simias.Service.Manager - "Simias User Movement Plugin" service started.
please help asap.Issue resolved by changing
LdapResyncOnRestart=No
to
LdapResyncOnRestart=Yes
Regards,
Muhammad Sharfuddin
Originally Posted by sharfuddin
OS: SLES 10 SP4 i586 + online updates
OES2 SP3 + online updates.
Today, I was configuring a POC demo of iFolder to a customer, and faced the following:
iFolder configured with MS AD 2003, and initial configuration(simias-server-setup, ifolder-admin, ifolder-web) went smooth, without errors. But I can't login via ifolder admin(ifadmin) user when accessing Admin Page(http://ip/admin) I got incorrect username password error.
As already informed, that iFolder configuration went smooth(error free) and iFolder Administrator account, plus iFolder Proxy accounts are all available in MS AD 2003, also I have provided the
appropriate DN during configuration(but still I am getting 'username password' error when accessing admin page).
logs says following:
please help asap. -
Security Error when starting the server - WPLS 7.0
Security Error when starting the server - WPLS 7.0
what may be the reason ...
console :
BUILD SUCCESSFUL
Total time: 3 seconds
Starting WebLogic Server...
<May 30, 2005 4:22:15 PM IST> <Notice> <Management> <140005> <Loading configuration C:\cpDomain\.\config.xml>
<May 30, 2005 4:22:18 PM IST> <Info> <Logging> <000000> <FileLogger Opened at C:\cpDomain\portalServer\weblogi
c.portalServer.log>
<May 30, 2005 4:22:21 PM IST> <Info> <Security> <090516> <The RoleMapper provider has preexisting LDAP data.>
<May 30, 2005 4:22:21 PM IST> <Info> <Security> <090516> <The Authorizer provider has preexisting LDAP data.>
<May 30, 2005 4:22:21 PM IST> <Info> <Security> <090143> <The weblogic keystore provider DefaultKeyStore in re
alm cprealm cannot be used for private keys because its configured private key keystore file wlDefaultKeyStore
.jks does not exist.>
<May 30, 2005 4:22:21 PM IST> <Info> <Security> <090142> <The weblogic keystore provider DefaultKeyStore in re
alm cprealm cannot be used for trusted (root) CAs because its trusted (root) CA keystore was not configured.>
<May 30, 2005 4:22:21 PM IST> <Notice> <Security> <090082> <Security initializing using realm cprealm.>
<May 30, 2005 4:22:21 PM IST> <Critical> <WebLogicServer> <000364> <Server failed during initialization. Excep
tion:java.lang.SecurityException: Authentication for user weblogic denied
java.lang.SecurityException: Authentication for user weblogic denied
at weblogic.security.service.SecurityServiceManagerDelegateImpl.doBootAuthorization(SecurityServiceMan
agerDelegateImpl.java:411)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize(SecurityServiceManagerDeleg
ateImpl.java:539)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:917)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
>
<May 30, 2005 4:22:21 PM IST> <Emergency> <WebLogicServer> <000342> <Unable to initialize the server: Fatal in
itialization exception
Throwable: java.lang.SecurityException: Authentication for user weblogic denied
java.lang.SecurityException: Authentication for user weblogic denied
at weblogic.security.service.SecurityServiceManagerDelegateImpl.doBootAuthorization(SecurityServiceMan
agerDelegateImpl.java:411)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize(SecurityServiceManagerDeleg
ateImpl.java:539)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:917)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
>
The WebLogic Server did not start up properly.
Exception raised:
java.lang.SecurityException: Authentication for user weblogic denied
at weblogic.security.service.SecurityServiceManagerDelegateImpl.doBootAuthorization(SecurityServiceMan
agerDelegateImpl.java:411)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize(SecurityServiceManagerDeleg
ateImpl.java:539)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:917)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
Reason: Fatal initialization exception
Throwable: java.lang.SecurityException: Authentication for user weblogic denied
java.lang.SecurityException: Authentication for user weblogic denied
at weblogic.security.service.SecurityServiceManagerDelegateImpl.doBootAuthorization(SecurityServiceMan
agerDelegateImpl.java:411)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize(SecurityServiceManagerDeleg
ateImpl.java:539)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:917)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
C:\cpDomain\bin>
Thanks
Thanks & Regards,
Siva VP,
[email protected]Looks like you cannot connect to LDAP. Are you configured correctly?
-
Got Error when creating application server connection
Hi Guys...I am using SOA 10.1.3.1.0
I got the following error when creating application server connection
In Step 1:
I selected the Connection type as Standalone OC4J 10.1.3 (Why because I use this one)
In Step 2:
In this step I gave username and password (same username and password to connect to BPEL console)to authenticate connection
In step 3:
It is asking for Hostname, RMI port and URL path. My computer name is gopal-computer. I gave this hostname. RMI port number is 23791 by default. I kept this one as it is and URL path optional I think. I did not give any thing.
In step 4:
When I hit the test connection button its giving the following error
Error while getting remote MBeanServer for url: ormi://gopal-computer:23791/default:
Error reading application-client descriptor: Error communicating with server: Connection refused: connect; nested exception is:
javax.naming.CommunicationException: Connection refused: connect [Root exception is java.net.ConnectException: Connection refused: connect]
Please help me.
Thanks,
Gopal.....For SOA Suite connection you should choose "Oracle application server 10g 10.1.3"
-
Error when configuring Siebel Server in Windows server 2003
Hi
I am getting below error when configuring Siebel server in Windows server 2003 VM. All the ODBC connections and SADMIN user id & password and gateway host name and port everything correct. Able to ping and telnet to gateway port 2320. Please help on how to overcome this situation....
2021 2012-03-08 01:13:22 0000-00-00 00:00:00 -0500 00000000 001 003f 0001 09 sw_cfg_util 3940 3332 C:\sba81\siebsrvr\log\sw_cfg_util.log 8.1.1 SIA [21111] ENU
GenericLog GenericError 1 000000024f580f64:0 2012-03-08 01:13:22 Error in transferring input values ,num of arrays incorrect 0, expected : 1
GenericLog GenericError 1 000000024f580f64:0 2012-03-08 01:13:22 TransferInputsToValues returned error:3611539 to SetControlValues
GenericLog GenericError 1 000000024f58096c:0 2012-03-08 01:13:33 NSS - ErrCode 4597527 SysErr 0
GenericLog GenericError 1 000000034f58096c:0 2012-03-08 01:13:35 NSS - ErrCode 4597527 SysErr 0
GenericLog GenericError 1 000000034f58096c:0 2012-03-08 01:13:35 Validation failed : C028: Unable to connect to the Siebel Gateway Name Server ῤ粃䂬粃呸 ֓呸 ֓㷕粃Ꞡ粈㶻粃
GenericLog GenericError 1 000000034f58096c:0 2012-03-08 01:13:35 ValidateFailed for Gateway Name Server TCP/IP Port, error : C028: Unable to connect to the Siebel Gateway Name Server ῤ粃䂬粃呸 ֓呸 ֓㷕粃Ꞡ粈㶻粃Please check Doc ID 1391312.1 on support.oracle.com, this article has a list of possible causes and resolutions for the error messages you are receiving.
Hope it helps,
Wilson -
An error when registering SQL server driver
Hi
I have got the following error when register SQL server drive
"RemoteMsDataBase.java": Error #: 302 : cannot access class com.microsoft.jdbc.sqlserver.SQLServerDriver; neither class nor source found for com.microsoft.jdbc.sqlserver.SQLServerDriver at line 19, column 63
the code that cause error
// register the SQL driver
DriverManager.registerDriver(new com.microsoft.jdbc.sqlserver.SQLServerDriver());
// connect to the DB by using the driver.
String connString = "my_dbserver:1433;databasename=my_database";
String strDBConnect = "jdbc:microsoft:sqlserver://" + connString;
conn = DriverManager.getConnection(strDBConnect, userName, passwd);
To include jars to my classpath do this:
javac -deprecation -classpath msbase.jar;msutil.jar;mssqlserver.jar *.javajavac -deprecation -classpath msbase.jar;msutil.jar;mssqlserver.jar *.javaSpecify the full path for jar(s), example,
javac -deprecation -classpath .;c:\myjars\msbase.jar;c:\myjars\msutil.jar;c:\myjars\mssqlserver.jar *.java
Hope it works.
Sudha -
800w error when synching (exchange server?)
Hello,
Bought an 800w but haven't been able to synch properly since initially setting up the device. I get the following error when synching:
"The server could not be reached. This can be caused by temporary network conditions."
Googled for solutions and came to the conclusion that the phone and/or PC thinks I'm on an exchange server as if I were at work. However, this is my home PC and it is not networked (except for wireless internet).
I'm thinking this is simply a settings error, but I don't know how to fix it. Any ideas?
Much appreciated!
Post relates to: Treo 800w (Sprint)Is the error when you sync "over the air" or when you connect to your PC? What kind of email do you have set up?
Post relates to: Treo 800w (Sprint) -
Hi all,
We are using NW6 SP5.
Lately, every time I restart the server, it start with an error page
roughly as follows:
Concurrent set model. Access to the server is limited to 10000 concurrent
seats
attempting to allocate cache of 32770k. 32768k of memory used for caching.
start "mgmtdb"
cannot open transaction log file - mgfmtdb.log is not a database
Databse server stopped.
I have to hit any key then it will start to load the modules.Somebody
advised me that this is not crucial.But, it is annoying as I can't restart
remotely and has to be physically in front of the server.
Thanks for helping
JSLC> On Tue, 14 Nov 2006 10:40:13 GMT, [email protected] wrote:
>
> > I have to hit any key then it will start to load the modules.Somebody
> > advised me that this is not crucial.But, it is annoying as I can't
restart
> > remotely and has to be physically in front of the server.
>
> hmm I would say that the database is corrupted.. and i guess it is
> mgmtdb.log or?
> --
>
>
> Marcus Breiden
>
> If you are asked to email me information please change -- to - in my e-
mail
> address.
> The content of this mail is my private and personal opinion.
> http://www.edu-magic.net
Thanks
What can I do to fix it?
jslc -
Errors starting Portal Admin Server after configuring RDBMS Security Store.
Hi,
I'm using WLST to build and configure the portal domain. I've already had our DBA run all the necessary scripts on the Database.
We are using WLP 10.3 on RHEL 4 and Oracle 10G RAC. I read on some thread that RDBMS is only compatble with verion 10.3.2 but why is the feature in 10.3?
The error below seems to point to the URL; does this mean that the RDBMS config does not support RAC databases?
Hope someone can shed light on this as it's pretty urgent.
Many thanks
A
This is the configuration for the created security store:-
-rw- CompatibilityObjectName null
-rw- ConnectionProperties
user=rdbms_user,portNumber=1521,serviceName=portal_db_service
-rw- ConnectionURL
jdbc:oracle:thin:@(DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST =
portal_host)(PORT = 1521))(CONNECT_DATA = (SERVER = DEDICATED)
(SERVICE_NAME = portal_db_service)))
-rw- DriverName
oracle.jdbc.xa.client.OracleXADataSource
-rw- JMSExceptionReconnectAttempts 0
-rw- JMSTopic null
-rw- JMSTopicConnectionFactory null
-rw- JNDIPasswordEncrypted null
-rw- JNDIUsername null
-rw- Name RDBMSSecurityStore
-rw- NotificationProperties null
-rw- PasswordEncrypted ********
-rw- Username rdbms_user
This is the error I'm getting when I attempt to start the Admin Server :-
####<10-May-2010 18:19:28 o'clock BST> <Info> <Security> <server>
<AdminServer> <[ACTIVE] ExecuteThread: '0' for queue:
'weblogic.kernel.Default (sel
f-tuning)'> <<WLS Kernel>> <1273511968053> <BEA-000000> <Using
dictionary class "kodo.jdbc.sql.KodoOracleDictionary".>
####<10-May-2010 18:19:28 o'clock BST> <Info> <Security> <server>
<AdminServer> <[ACTIVE] ExecuteThread: '0' for queue:
'weblogic.kernel.Default (sel
f-tuning)'> <<WLS Kernel>> <1273511968246> <BEA-000000> <OpenJPA
is now connecting to the database in order to figure out what JDBC
driver you are using
, as OpenJPA must alter its behavior for this database depending on the
driver vendor. To avoid this connection, set the DriverVendor value in
your openjpa.j
dbc.DBDictionary configuration property to one of the following values:
oracle, oracle92 (for the 9.2 driver), datadirect, datadirect61 (for
driver versions <= 3.1), other
For example:
openjpa.jdbc.DBDictionary: oracle(DriverVendor=oracle92)>
####<10-May-2010 18:19:28 o'clock BST> <Info> <Security> <server>
<AdminServer> <[ACTIVE] ExecuteThread: '0' for queue:
'weblogic.kernel.Default (sel
f-tuning)'> <<WLS Kernel>> <1273511968257> <BEA-090511> <The
following exception has occurred:
com.bea.common.engine.ServiceInitializationException:
<openjpa-1.1.0-r422266:657916 fatal internal error>
org.apache.openjpa.util.InternalException: There was
an error when invoking the static getInstance method on the named
factory class "kodo.jdbc.kernel.KodoJDBCBrokerFactory". See the nested
exception for detai
ls.
at
com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(Serv
iceEngineImpl.java:365)
at
com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(Serv
iceEngineImpl.java:315)
at
com.bea.common.engine.internal.ServiceEngineImpl.lookupService(ServiceEn
gineImpl.java:257)
at
com.bea.common.engine.internal.ServicesImpl.getService(ServicesImpl.java
:72)
at
weblogic.security.service.internal.WLSIdentityServiceImpl.initialize(Unk
nown Source)
at
weblogic.security.service.CSSWLSDelegateImpl.initializeServiceEngine(Unk
nown Source)
at
weblogic.security.service.CSSWLSDelegateImpl.initialize(Unknown Source)
at
weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.Initi
alizeServiceEngine(Unknown Source)
at
weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initi
alizeRealm(Unknown Source)
at
weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadR
ealm(Unknown Source)
at
weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initi
alizeRealms(Unknown Source)
at
weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initi
alizeRealms(Unknown Source)
at
weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initi
alize(Unknown Source)
at
weblogic.security.service.SecurityServiceManager.initialize(Unknown
Source)
at
weblogic.security.SecurityService.start(SecurityService.java:141)
at
weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
<openjpa-1.1.0-r422266:657916 fatal internal error>
org.apache.openjpa.util.InternalException: There was an error when
invoking the static getInstance method
on the named factory class "kodo.jdbc.kernel.KodoJDBCBrokerFactory".
See the nested exception for details.
at
org.apache.openjpa.kernel.Bootstrap.getBrokerFactory(Bootstrap.java:95)
at
com.bea.common.security.storeservice.util.StoreServiceDelegate$StoreSeri
vceHelper.getPersistenceManagerFactory(StoreServiceDelegate.java:347)
at
com.bea.common.security.storeservice.util.StoreServiceDelegate.initJDO(S
toreServiceDelegate.java:145)
at
com.bea.common.security.storeservice.util.StoreServiceDelegate.<init>(St
oreServiceDelegate.java:98)
at
com.bea.common.security.internal.service.StoreServiceImpl.init(StoreServ
iceImpl.java:76)
at
com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(Serv
iceEngineImpl.java:363)
at
com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(Serv
iceEngineImpl.java:315)
at
com.bea.common.engine.internal.ServiceEngineImpl.lookupService(ServiceEn
gineImpl.java:257)
at
com.bea.common.engine.internal.ServicesImpl.getService(ServicesImpl.java
:72)
at
weblogic.security.service.internal.WLSIdentityServiceImpl.initialize(Unk
nown Source)
at
weblogic.security.service.CSSWLSDelegateImpl.initializeServiceEngine(Unk
nown Source)
at
weblogic.security.service.CSSWLSDelegateImpl.initialize(Unknown Source)
at
weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.Initi
alizeServiceEngine(Unknown Source)
at
weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initi
alizeRealm(Unknown Source)
at
weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadR
ealm(Unknown Source)
at
weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initi
alizeRealms(Unknown Source)
at
weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initi
alize(Unknown Source)
at
weblogic.security.service.SecurityServiceManager.initialize(Unknown
Source)
at
weblogic.security.SecurityService.start(SecurityService.java:141)
at
weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
java.lang.RuntimeException: There were errors initializing your
configuration: <openjpa-1.1.0-r422266:657916 fatal store error>
org.apache.openjpa.util.StoreE
xception: Invalid Oracle URL specified: OracleDataSource.makeURL
at
org.apache.openjpa.jdbc.schema.DataSourceFactory.installDBDictionary(Dat
aSourceFactory.java:235)
at
org.apache.openjpa.jdbc.conf.JDBCConfigurationImpl.getConnectionFactory(
JDBCConfigurationImpl.java:684)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.jav
a:39)
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessor
Impl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at
org.apache.openjpa.lib.conf.ConfigurationImpl.instantiateAll(Configurati
onImpl.java:288)
at
org.apache.openjpa.conf.OpenJPAConfigurationImpl.instantiateAll(OpenJPAC
onfigurationImpl.java:1409)
at
org.apache.openjpa.kernel.AbstractBrokerFactory.makeReadOnly(AbstractBro
kerFactory.java:646)
at
org.apache.openjpa.kernel.AbstractBrokerFactory.pool(AbstractBrokerFacto
ry.java:131)
at
kodo.jdbc.kernel.KodoJDBCBrokerFactory.getInstance(KodoJDBCBrokerFactory
.java:43)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.jav
a:39)
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessor
Impl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at
org.apache.openjpa.kernel.Bootstrap.invokeFactory(Bootstrap.java:124)
at
org.apache.openjpa.kernel.Bootstrap.getBrokerFactory(Bootstrap.java:90)
at
com.bea.common.security.storeservice.util.StoreServiceDelegate$StoreSeri
vceHelper.getPersistenceManagerFactory(StoreServiceDelegate.java:347)
at
com.bea.common.security.storeservice.util.StoreServiceDelegate.initJDO(S
toreServiceDelegate.java:145)
at
com.bea.common.security.storeservice.util.StoreServiceDelegate.<init>(St
oreServiceDelegate.java:98)
at
com.bea.common.security.internal.service.StoreServiceImpl.init(StoreServ
iceImpl.java:76)
at
com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(Serv
iceEngineImpl.java:363)
at
com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(Serv
iceEngineImpl.java:315)
at
com.bea.common.engine.internal.ServiceEngineImpl.lookupService(ServiceEn
gineImpl.java:257)
at
com.bea.common.engine.internal.ServicesImpl.getService(ServicesImpl.java
:72)
at
weblogic.security.service.internal.WLSIdentityServiceImpl.initialize(Unk
nown Source)
at
weblogic.security.service.CSSWLSDelegateImpl.initializeServiceEngine(Unk
nown Source)
at
weblogic.security.service.CSSWLSDelegateImpl.initialize(Unknown Source)
at
weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.Initi
alizeServiceEngine(Unknown Source)
at
weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initi
alizeRealm(Unknown Source)
at
weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadR
ealm(Unknown Source)
at
weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initi
alizeRealms(Unknown Source)
at
weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initi
alize(Unknown Source)
at
weblogic.security.service.SecurityServiceManager.initialize(Unknown
Source)
at
weblogic.security.SecurityService.start(SecurityService.java:141)
at
weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: java.sql.SQLException: Invalid Oracle URL specified:
OracleDataSource.makeURL
at
oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:
70)
at
oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:112)
at
oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:17
3)
at
oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:22
9)
at
oracle.jdbc.pool.OracleDataSource.makeURL(OracleDataSource.java:1234)
at
oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:18
4)
at
org.apache.openjpa.lib.jdbc.DelegatingDataSource.getConnection(Delegatin
gDataSource.java:113)
at
org.apache.openjpa.lib.jdbc.DecoratingDataSource.getConnection(Decoratin
gDataSource.java:93)
at
org.apache.openjpa.jdbc.schema.DataSourceFactory.installDBDictionary(Dat
aSourceFactory.java:227)
... 37 more
<openjpa-1.1.0-r422266:657916 fatal store error>
org.apache.openjpa.util.StoreException: Invalid Oracle URL specified:
OracleDataSource.makeURL
at
org.apache.openjpa.jdbc.schema.DataSourceFactory.installDBDictionary(Dat
aSourceFactory.java:235)
at
org.apache.openjpa.jdbc.conf.JDBCConfigurationImpl.getConnectionFactory(
JDBCConfigurationImpl.java:684)
at
org.apache.openjpa.jdbc.conf.JDBCConfigurationImpl.getDataSource(JDBCCon
figurationImpl.java:782)
at
org.apache.openjpa.jdbc.conf.JDBCConfigurationImpl.getDataSource2(JDBCCo
nfigurationImpl.java:789)
at
org.apache.openjpa.jdbc.sql.OracleDictionary.ensureDriverVendor(OracleDi
ctionary.java:253)
at
kodo.jdbc.sql.OracleAdvancedSQL.setDriverVendorDefaults(OracleAdvancedSQ
L.java:50)
at
kodo.jdbc.sql.OracleAdvancedSQL.getBatchLimit(OracleAdvancedSQL.java:28)
at
kodo.jdbc.kernel.AutoOrderUpdateManager.setConfiguration(AutoOrderUpdate
Manager.java:56)
at
org.apache.openjpa.lib.conf.Configurations.configureInstance(Configurati
ons.java:473)
at
org.apache.openjpa.lib.conf.Configurations.configureInstance(Configurati
ons.java:430)
at
org.apache.openjpa.lib.conf.PluginValue.instantiate(PluginValue.java:103
at
org.apache.openjpa.lib.conf.ObjectValue.instantiate(ObjectValue.java:83)
at
org.apache.openjpa.jdbc.conf.JDBCConfigurationImpl.getUpdateManagerInsta
nce(JDBCConfigurationImpl.java:577)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.jav
a:39)
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessor
Impl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at
org.apache.openjpa.lib.conf.ConfigurationImpl.instantiateAll(Configurati
onImpl.java:288)
at
org.apache.openjpa.conf.OpenJPAConfigurationImpl.instantiateAll(OpenJPAC
onfigurationImpl.java:1409)
at
org.apache.openjpa.kernel.AbstractBrokerFactory.makeReadOnly(AbstractBro
kerFactory.java:646)
at
org.apache.openjpa.kernel.AbstractBrokerFactory.pool(AbstractBrokerFacto
ry.java:131)
at
kodo.jdbc.kernel.KodoJDBCBrokerFactory.getInstance(KodoJDBCBrokerFactory
.java:43)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.jav
a:39)
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessor
Impl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at
org.apache.openjpa.kernel.Bootstrap.invokeFactory(Bootstrap.java:124)
at
org.apache.openjpa.kernel.Bootstrap.getBrokerFactory(Bootstrap.java:90)
at
com.bea.common.security.storeservice.util.StoreServiceDelegate$StoreSeri
vceHelper.getPersistenceManagerFactory(StoreServiceDelegate.java:347)
at
com.bea.common.security.storeservice.util.StoreServiceDelegate.initJDO(S
toreServiceDelegate.java:145)
at
com.bea.common.security.storeservice.util.StoreServiceDelegate.<init>(St
oreServiceDelegate.java:98)
at
com.bea.common.security.internal.service.StoreServiceImpl.init(StoreServ
iceImpl.java:76)
at
com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(Serv
iceEngineImpl.java:363)
at
com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(Serv
iceEngineImpl.java:315)Thanks, Ravi - already did all that. I have managed to stand the whole cluster up but two niggly things - one more so!
First, when I start any of the managed servers for the forst time, I get the error below; it's as if the managed server can't download the ldap config from the AdminServer - subsequent restarts work fine though.
tuning)'> <<WLS Kernel>> <> <> <1273851208837> <BEA-000436> <Allocating 3 reader threads.>
####<14-May-2010 16:33:28 o'clock BST> <Info> <Socket> <host_2> <server_2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-
tuning)'> <<WLS Kernel>> <> <> <1273851208839> <BEA-000446> <Native IO Enabled.>
####<14-May-2010 16:33:29 o'clock BST> <Info> <IIOP> <host_2> <server_2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1273851209488> <BEA-002014> <IIOP subsystem enabled.>
####<14-May-2010 16:34:28 o'clock BST> <Critical> <WebLogicServer> <host_2> <server_2> <Main Thread> <<WLS Kernel>> <> <> <1273851268370> <BEA-000
386> <Server subsystem failed. Reason: weblogic.ldap.EmbeddedLDAPException: Empty initial replica
weblogic.ldap.EmbeddedLDAPException: Empty initial replica
at weblogic.ldap.EmbeddedLDAP.getInitialReplicaFromAdminServer(EmbeddedLDAP.java:1301)
at weblogic.ldap.EmbeddedLDAP.start(EmbeddedLDAP.java:221)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
>
####<14-May-2010 16:34:28 o'clock BST> <Notice> <WebLogicServer> <host_2> <server_2> <Main Thread> <<WLS Kernel>> <> <> <1273851268601> <BEA-00036
5> <Server state changed to FAILED>
Secondly, both managed server are starting in ADMIN mode because some of the libraries aren't getting deployed. Think this is due to clashes in the Implementation-Version. I get the errors below (loads of the libraries - approx a third but I just pasted this for brevity) although after starting them with nodemanager and they go into ADMIN mode, I can always click on resume which then starts them up. Any idea why this is the case?
Many, many, thanks!
A
plementation-Version: 1.0.2.2 (WAR).>
####<14-May-2010 16:59:21 o'clock BST> <Error> <Deployer> <host_2> <server_2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (se
lf-tuning)'> <<WLS Kernel>> <> <> <1273852761063> <BEA-149205> <Failed to initialize the application 'content-management-app-lib [LibSpecVersion=10.3.2,LibImp
lVersion=10.3.2]' due to error weblogic.application.library.LibraryDeploymentException: [J2EE:160145]Failed to deploy library Extension-Name: content-manageme
nt-app-lib, Specification-Version: 10.3.2, Implementation-Version: 10.3.2.1, because of conflicting library Manifest values, and library information registere
d with the server: [Implementation-Version: 10.3.2.1 vs. 10.3.2]. Check the library"s MANIFEST.MF file, and correct version info there to match server setting
s. Or undeploy the misconfigured library..
weblogic.application.library.LibraryDeploymentException: [J2EE:160145]Failed to deploy library Extension-Name: content-management-app-lib, Specification-Versi
on: 10.3.2, Implementation-Version: 10.3.2.1, because of conflicting library Manifest values, and library information registered with the server: [Implementat
ion-Version: 10.3.2.1 vs. 10.3.2]. Check the library"s MANIFEST.MF file, and correct version info there to match server settings. Or undeploy the misconfigure
d library.
at weblogic.application.internal.library.LibraryDeploymentFactory.getLibData(LibraryDeploymentFactory.java:106)
at weblogic.application.internal.library.LibraryDeploymentFactory.createDeployment(LibraryDeploymentFactory.java:46)
at weblogic.application.internal.DeploymentManagerImpl.createDeployment(DeploymentManagerImpl.java:84)
at weblogic.deploy.internal.targetserver.BasicDeployment.createDeployment(BasicDeployment.java:149)
at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:114)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:39)
at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:187)
at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:21)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
>
####<14-May-2010 16:59:21 o'clock BST> <Info> <J2EE> <host_2> <server_2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tu
ning)'> <<WLS Kernel>> <> <> <1273852761069> <BEA-160151> <Registered library Extension-Name: content-management-app-lib, Specification-Version: 10.3.2, Imple
mentation-Version: 10.3.2.1 (EAR).>
####<14-May-2010 16:59:21 o'clock BST> <Error> <Deployer> <host_2> <server_2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (se
lf-tuning)'> <<WLS Kernel>> <> <> <1273852761074> <BEA-149205> <Failed to initialize the application 'content-management-cmis-base-web-lib [LibSpecVersion=10.
3.2,LibImplVersion=10.3.2]' due to error weblogic.application.library.LibraryDeploymentException: [J2EE:160145]Failed to deploy library Extension-Name: conten
t-management-cmis-base-web-lib, Specification-Version: 10.3.2, Implementation-Version: 10.3.2.1, because of conflicting library Manifest values, and library i
nformation registered with the server: [Implementation-Version: 10.3.2.1 vs. 10.3.2]. Check the library"s MANIFEST.MF file, and correct version info there to
match server settings. Or undeploy the misconfigured library..
weblogic.application.library.LibraryDeploymentException: [J2EE:160145]Failed to deploy library Extension-Name: content-management-cmis-base-web-lib, Specifica
tion-Version: 10.3.2, Implementation-Version: 10.3.2.1, because of conflicting library Manifest values, and library information registered with the server: [I
mplementation-Version: 10.3.2.1 vs. 10.3.2]. Check the library"s MANIFEST.MF file, and correct version info there to match server settings. Or undeploy the mi
sconfigured library.
at weblogic.application.internal.library.LibraryDeploymentFactory.getLibData(LibraryDeploymentFactory.java:106)
at weblogic.application.internal.library.LibraryDeploymentFactory.createDeployment(LibraryDeploymentFactory.java:46)
at weblogic.application.internal.DeploymentManagerImpl.createDeployment(DeploymentManagerImpl.java:84)
at weblogic.deploy.internal.targetserver.BasicDeployment.createDeployment(BasicDeployment.java:149)
at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:114)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:39)
at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:187)
at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:21)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64) -
Error when adding Essbase server...
Hi,
I installed Hyperion System 9.3.1 in my development machine and encounter the following error when adding a Essbase server in AAS for the first time.
Error: 1042017: Network error: The client or server timed out waiting to receive data using TCP/IP. Check network connections. Increase the NetRetryCount and/or NetDelay values in the ESSBASE.CFG file. Update this file on both client and server. Restart the client and try again.
I used the default user "admin" and password "password". I used my servername:10080 as the server name. I hope I am right.
Why is this happening? I tried changing netdelay settings but still get the same. Is this something else? Does this have anything to do with my TCP/IP settings? I am installing this on a virtual PC.
I couldn't find an answer in previous posts.
regards
hThe things that come to mind:
The server name you use should be the name of the virtual PC, not the machine it's running on. Also, depending on the settings for the Virtual PC environment, you may have to change the network options to allow it to be visible to the network, be in the right domain, etc...
The above may or may not get you any closer, the error message itself is just saying it can't receive a response from the server, which means the server never got the request or can't send a response back.
Good Luck, -
Error starting weblogic Admin server
Hi All,
I am not very familiar with Fusion and weblogic but here is my situation:
Background: I am trying to install Fusion Middleware so I can integrate Oracle Transport Management with E-Business Suite (as per note Integrating Oracle E-Business Suite Release 12 with Oracle BPEL in Oracle SOA Suite 11g (Doc ID 1321776.1))
I just installed the following on Oracle Enterprise Linux 64bits
- SOA Suite 11.1.1.7.0
- Weblogic Server 10.3.6
-JDK 1.7.0_25
-Jdev 11.1.1.7.0
When starting the weblogic Admin server using "DOMAIN_HOME/startWebLogic.sh' I get an error:
Starting weblogic with Java version:
Unrecognized option -jrockit
Error: Could not create the Java virtual machine
I found a few thread with similar issue (for different versions of SOA suite) where it got fixed by changing some parameters in the cmd file but I am not sure they apply to my case.
Is the jdk version compatible? (I can start JDeveloper ok) , if not which one is the appropriate version. If i need to change it, can you provide details of how to do it? (I am not expert on SOA/Jdev )
Can you please help me here ?
Thanks in advance!Well, I tested it
java -version and it shows :
1.7.0_25
Java HotSpot 64 bit Server VM
--> So I guess the problem is I don't seem to have the jrockit.
I donwloaded it (Rel 28.7) and installed it. During installation it says "for JDK 1.6.0_45"
Anyway. I let it install anyway and I modified the PATH to point to the Jrockit bin directory. Then run java -version and it now shows JDK 1.6.0_45 and jvm as rockit
Now I tried to start the weblogic server and I get the same error. it still uses the JDK 1.7
So.. again.. is this supported with JDK 7 ?
How can I fix it now that I installed everything using the JDK 7?
Thanks -
Error when starting weblogic server 10.3.6
hi am having below error when starting my weblogic server am in window xp
C:\mydomain\base_domain\bin>DIR
Volume in drive C is WinXP
Volume Serial Number is F086-F167
Directory of C:\mydomain\base_domain\bin
22/04/2011 11:10 PM <DIR> .
22/04/2011 11:10 PM <DIR> ..
22/04/2011 11:10 PM <DIR> nodemanager
22/04/2011 11:10 PM <DIR> server_migration
22/04/2011 11:10 PM <DIR> service_migration
29/11/2011 10:14 PM 14,273 setDomainEnv.cmd
29/11/2011 10:14 PM 16,221 setDomainEnv.sh
29/11/2011 10:14 PM 3,322 startManagedWebLogic.cmd
29/11/2011 10:14 PM 3,147 startManagedWebLogic.sh
29/11/2011 10:14 PM 5,914 startWebLogic.cmd
29/11/2011 10:14 PM 5,657 startWebLogic.sh
29/11/2011 10:14 PM 2,528 stopManagedWebLogic.cmd
29/11/2011 10:14 PM 2,391 stopManagedWebLogic.sh
29/11/2011 10:14 PM 2,103 stopWebLogic.cmd
29/11/2011 10:14 PM 2,081 stopWebLogic.sh
10 File(s) 57,637 bytes
5 Dir(s) 6,815,825,920 bytes free
C:\mydomain\base_domain\bin>START startWebLogic.cmd
C:\mydomain\base_domain\bin>
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=
128m -XX:MaxPermSize=512m
WLS Start Mode=Development
CLASSPATH=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar;C
:\PROGRA~1\Java\JDK16~1.0_2\lib\tools.jar;C:\wlserver\server\lib\weblogic_sp.jar
;C:\wlserver\server\lib\weblogic.jar;C:\modules\features\weblogic.server.modules
_10.3.4.0.jar;C:\wlserver\server\lib\webservices.jar;C:\modules\org.apache.ant_1
.7.1/lib/ant-all.jar;C:\modules\net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.
jar;C:\oracle\Middleware\wlserver_10.3\sip\server\lib\weblogic_sip.jar;C:\Oracle
\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;C:\wlserver\common\derby\li
b\derbyclient.jar;C:\wlserver\server\lib\xqrl.jar
PATH=;C:\wlserver\server\native\win\32;C:\wlserver\server\bin;C:\modules\org.apa
che.ant_1.7.1\bin;C:\PROGRA~1\Java\JDK16~1.0_2\jre\bin;C:\PROGRA~1\Java\JDK16~1.
0_2\bin;C:\Program Files\PC Connectivity Solution\;C:\product\11.2.0\dbhome_1\bi
n;C:\product\11.2.0\dbhome_1;C:\forms;C:\DevSuiteHome_1\jlib;C:\Program Files\PH
P;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Commo
n Files\Roxio Shared\DLLShared;C:\Program Files\Common Files\Roxio Shared\DLLSha
red;C:\Program Files\Common Files\Roxio Shared\9.0\DLLShared;C:\Program Files\Co
mmon Files\DivX Shared;c:\Program Files\Java\jdk1.6.0_21\bin;C:\Program Files\Co
mmon Files\Roxio Shared\10.0\DLLShared;C:\Program Files\Common Files\Roxio Share
d\DLLShared;C:\Program Files\Common Files\Roxio Shared\10.0\DLLShared;C:\mywls;C
:\mydomain\base_domain\bin;C:\Program Files\Java\jre6\bin\client;C:\Program File
s\Java\jre6\bin;C:\Program Files\Java\jdk1.6.0_21\jre\bin;C:\Program Files\Java\
jdk1.6.0_21\bin;C:\Program Files\Java\jdk1.6.0_21;C:\Program Files\Java\jre6;C:\
DevSuiteHome_1\forms;C:\DevSuiteHome_1\cgenf61\admin;C:\DevSuiteHome_1\forms;C:\
forms\sms_code.pll;C:\mywls\wlserver;C:\Java\jdk1.6.0_21;C:\wlserver\server\nati
ve\win\32\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.6.0_21"
Java(TM) SE Runtime Environment (build 1.6.0_21-b07)
Java HotSpot(TM) Client VM (build 17.0-b17, mixed mode)
Starting WLS with line:
C:\PROGRA~1\Java\JDK16~1.0_2\bin\java -client -Xms256m -Xmx512m -XX:CompileThr
eshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=AdminServer
-Djava.security.policy=C:\wlserver\server\lib\weblogic.policy -Xverify:none -ea
:com.bea.wcp... -da -Dplatform.home=C:\wlserver -Dwls.home=C:\wlserver\server
-Dweblogic.home=C:\wlserver\server -Dcommon.components.home=C:\Oracle\MIDDLE~1\
ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.common
s.logging.impl.Jdk14Logger -Ddomain.home=C:\mydomain\BASE_D~1 -Djrockit.optfile=
C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Dorac
le.server.config.dir=C:\mydomain\BASE_D~1\config\FMWCON~1\servers\AdminServer -D
oracle.domain.config.dir=C:\mydomain\BASE_D~1\config\FMWCON~1 -Digf.arisidbeans
.carmlloc=C:\mydomain\BASE_D~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\
mydomain\BASE_D~1\config\FMWCON~1\arisidprovider -Doracle.security.jps.config=C:
\mydomain\BASE_D~1\config\fmwconfig\jps-config.xml -Doracle.deployed.app.dir=C:\
mydomain\BASE_D~1\servers\AdminServer\tmp\_WL_user -Doracle.deployed.app.ext=\-
-Dweblogic.alternateTypesDirectory=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.os
soiap_11.1.1,C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Djav
a.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=f
alse -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole
= -Dwlw.logErrorsToConsole= weblogic.Server
Exception in thread "main" java.lang.NoClassDefFoundError: weblogic/Server
Caused by: java.lang.ClassNotFoundException: weblogic.Server
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
Could not find the main class: weblogic.Server. Program will exit.
my set is
C:\mydomain\base_domain\bin>SET
ALLUSERSPROFILE=C:\Documents and Settings\All Users
APPDATA=C:\Documents and Settings\Desmond\Application Data
CLIENTNAME=Console
CommonProgramFiles=C:\Program Files\Common Files
COMPUTERNAME=MADIMAD-B533821
ComSpec=C:\WINDOWS\system32\cmd.exe
FORMS90_PATH=C:\forms
FP_NO_HOST_CHECK=NO
HOMEDRIVE=C:
HOMEPATH=\Documents and Settings\Desmond
LOGONSERVER=\\MADIMAD-B533821
NUMBER_OF_PROCESSORS=2
ORACLE_HOME=C:\product\11.2.0\dbhome_1
OS=Windows_NT
Path=C:\Program Files\PC Connectivity Solution\;C:\product\11.2.0\dbhome_1\bin;C
:\product\11.2.0\dbhome_1;C:\forms;C:\DevSuiteHome_1\jlib;C:\Program Files\PHP;C
:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Common F
iles\Roxio Shared\DLLShared;C:\Program Files\Common Files\Roxio Shared\DLLShared
;C:\Program Files\Common Files\Roxio Shared\9.0\DLLShared;C:\Program Files\Commo
n Files\DivX Shared;c:\Program Files\Java\jdk1.6.0_21\bin;C:\Program Files\Commo
n Files\Roxio Shared\10.0\DLLShared;C:\Program Files\Common Files\Roxio Shared\D
LLShared;C:\Program Files\Common Files\Roxio Shared\10.0\DLLShared;C:\mywls;C:\m
ydomain\base_domain\bin;C:\Program Files\Java\jre6\bin\client;C:\Program Files\J
ava\jre6\bin;C:\Program Files\Java\jdk1.6.0_21\jre\bin;C:\Program Files\Java\jdk
1.6.0_21\bin;C:\Program Files\Java\jdk1.6.0_21;C:\Program Files\Java\jre6;C:\Dev
SuiteHome_1\forms;C:\DevSuiteHome_1\cgenf61\admin;C:\DevSuiteHome_1\forms;C:\for
ms\sms_code.pll;C:\mywls\wlserver;C:\Java\jdk1.6.0_21
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
PHPRC=C:\Program Files\PHP\
PROCESSOR_ARCHITECTURE=x86
PROCESSOR_IDENTIFIER=x86 Family 6 Model 23 Stepping 10, GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=170a
ProgramFiles=C:\Program Files
PROMPT=$P$G
SESSIONNAME=Console
SystemDrive=C:
SystemRoot=C:\WINDOWS
TEMP=C:\DOCUME~1\Desmond\LOCALS~1\Temp
TMP=C:\DOCUME~1\Desmond\LOCALS~1\Temp
USERDOMAIN=MADIMAD-B533821
USERNAME=Desmond
USERPROFILE=C:\Documents and Settings\Desmond
windir=C:\WINDOWS
aa__COMPAT_LAYER=EnableNXShowUITshifhiwa,
Back again? Nothing learned?
No jdev version?
You should n^know by now that you have to give at least some basic information.
A description of what you tried to do outside the listing would help too.
Timo
Maybe you are looking for
-
What is the difference between Aspect Ratios?
Hello. I couldn't find any specific documentation regarding this. I am working on an iPhoto 09 slideshow project using the scrapbook theme. I am planning to export the slideshow as a movie (it looks like the default export is mpeg 4 but I could also
-
I need instructions on the above subject. I want to send, transfer, download from my PC to someone else web page. I have no clue right now
-
Does restoring the iPhone reset the call time usage?
Mine seems to have done, and now I find it hard to know how much time I have used. One other thing, will this automatically reset at the start of a new contract month when your minutes gets renewed? Thanks
-
It took many years but the Xserve software finally became corrupt and required a full re-install. I used to be able to see the entire HD volume when looking in via AFP as an administrator. If I recall, I had to run a terminal command to make that hap
-
LabVIEW animation picture ring memory allocation
I'm creating an animation in labview, I have 1,000 images that I need to flip through, I'm using a pict ring and flipping through the images... problem is after loading about 200 images (they're 20k each) my computer throw in the towel, the RAM is fu