Error When Trying To Publish In Visual Studio 2013 C# Project

I have a C# Winforms app in Visual Studio that has a problem. when I click on Project->Properties->Publish and click on the Options button, I get a prompt saying "An error occurred trying to load the page. An item with the same key has already
been added."
What causes this and how do I fix it?

Carl,
Here's a screenshot of my project's Solution Explorer:
OK, so I have a file called "Resources.resx" and another folder down below called "Resources" which contains images. Which one should I rename and what do I do about possible errors that might pop up when I try to Build or Run the app?
Hello,
I mean the .resx file, but based on your screenshot, the Resources.resx file was generated by Visual Studio and it was not added by yourself, right?
This issue has beend discussed in the following thread, you could compare it with yours to narrow down this issue, since the error message shows that the project added duplicate data.
http://stackoverflow.com/questions/3003914/vs2010-an-item-with-the-same-key-has-already-been-added
You could follow that thread to check both the .resx file and the .csproj file to see whether there are duplicate data have been added.
Regards,
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

Visual Studio error when trying to open a Feature in a SharePoint Project (An exception occurred while calling 'OnImportsSatisfied')

I am getting the following error message in both Visual Studio 2012 and Visual Studio 2013 when I try to open any "Feature" in a SharePoint 2013 project.
An exception occurred while calling the 'OnImportsSatisfied' method on type 'Microsoft.VisualStudio.SharePoint.Designers.Package.ViewModels.FeatureViewModel'.
(the stack trace then continues on for ages - shown in full below)
I _think_ this started happening when I ran Windows Update recently.
This happens for both old and new projects, both Sandbox and Farm solutions.
I have tried:
Removing all Windows Updates from the past week
Removing all previous versions of Visual Studio (2012)
Completely uninstalling and reinstalling Visual Studio (with reboots inbetween)
Installing VS2013 Update 1
Nothing that I do seems to fix this ..
Full Error:
regards
Martin Hatch
MCPD & MCITP SharePoint 2010
MCTS WSS 3.0 | MOSS 2007
www.martinhatch.com

Hi,
Please check that whether you have installed the Microsoft Office Developer Tools for Visual Studio 2012.
The link below will provide more details:
Prerequisites for creating SharePoint 2013 projects using Visual Studio 2012
Best regards
Patrick Liang
TechNet Community Support

When trying to run a Visual Studio 2010 program under Task Scheduler, it always gives a return code of 3762507597.

I am trying to run a Visual Studio 2010 program under Task Scheduler. We were running the program under Scheduled Tasks
in Windows XP with no problems. When it runs under Task Scheduler it always gives a return code of 3762507597. If I run
the program out of Task Scheduler it runs fine. Running Task Scheduler as Administrator and running the program with
Run with highest privileges.. Any help or suggestions would be appreciated.... Thanks

Hi,
Could you let us know the exact error message? How did you configure it?
Please follow this guide to check your settings:
Use the Task Scheduler to Launch Programs Without UAC Prompts
http://www.7tutorials.com/use-task-scheduler-launch-programs-without-uac-prompts
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Karen Hu
TechNet Community Support

Client ADI App File Server Connection error when trying to publish report.

Our users are having intermittent problems when trying to publish reports from their Client ADI process to Excel. They are receiving the error:
"An error occurred while attempting to establish an Applications File Server Connection. There may be a network configuration problem, or the TNS listener may not be running. Nodename:"
The problem is this issue will be present for a user and then for no reason that user will be able to publish reports again. Or several users will get this error and one user will be able to publish reports. The only consistency is when it errors out they get this message. The listener appears to be up and running as well.
We are running 11.5.10.2 and ADI version: 7.2.12
Any helps or tips would be appreciated.

"An error occurred while attempting to establish an Applications File Server Connection. There may be a network configuration problem, or the TNS listener may not be running. Nodename:"Please see these MOS docs.
ADI: Troubleshooting Connection Problems with ADI/GLDI [ID 70669.1]
Troubleshooting the "Error Occurred While Attempting to Establish an Applications File Server Connection" [ID 117012.1]
How To Validate FNDFS For Applications Desktop Integrator - ADI [ID 364796.1]
ADI: Unable To View Reports In ADI [ID 1018797.102]
Can not View Reports Submitted through ADI/Request Center [ID 135128.1]
ADI RRA:Prefix When Connecting to Server with Muiltple Apps Instances [ID 201492.1]
ADI Application File Server Connection Error [ID 146220.1]
Thanks,
Hussein

Adobe Captivate 6.0 fatal error when trying to publish

Currently working on Adobe Captivate 6.0 and recently have experienced a fatal error message when trying to publish my project. The fatal error message creates a backup and requests to restart Adobe Captivate.

Hello ,
Welcome to Adobe Forums!
Could you please check the exact version of Adobe Captivate you are using (Go to help > About Adobe Captivate)?
Are you having the same issue with other projects as well ?
Please make sure the project files and published folder should be on local computer and not on any network location.
Thanks
Himanshu

I get an error when trying to publish iPhotos to Facebook.

I get an error when trying to upload iPhotos to Facebook. Is there something I need to do to be able to share photos?

Put in your Facebook login info again.

Get error when trying to publish crystal report to infoview

Hi, Gurus,
I got an error while trying to publish a Crystal report.
The error message says: Fail to read data from report file C:\TEMP~crw{70BDE794-E283-4773-A259-BA810F3E1697}.rpt. Failed to read parameter object.
I'm using a dynamic cascading parameter. The report runs fine in development enviornment.
I'm using Crystal 2008 SP2 and XI3.1
Thank you.
Kiki

There are several SAP NOTES (KB articles) on this error, have you tried searching Knowledge base ?
Most likely it's due to the fact that you have a verson mismatch between CR 2008 and XI3.1.

Can't update SQL 2014 DB during web publish from Visual Studio 2013

According to Visual Studio 2013 I have "SQL Server Data Tool 12.0.40706.0" installed, which should allow me to update a SQL 2014 database but when I try to publish my web application I get the error: "Web deployment task failed. (Could not
generatedeployment script. Internal Error. The database platform service with type Microsoft.Data.Tools.Schema.Sql.Sql120DatabaseSchemaProvider is not valid. You must make sure the service is loaded, or you must provide the full type name of a valid database
platform service. Internal Error. The database platform service with type Microsoft.Data.Tools.Schema.Sql.Sql120DatabaseSchemaProvider is not valid. You must make sure the service isloaded, or you must provide the full type name of a valid database platform
service. Learn more at:
http://go.microsoft.com/fwlink/?LinkId=221672#ERROR_EXECUTING_METHOD.)" I can update the database fine if I go into the package managment console and run -UPDATE-DATABASE but I don't want to have to go into myweb.config, update it to point to the production
database, run the update command, and then change my web.config back everytime I try to update my database. What do I have to do to getthis working? I had no problems when I was on an Azure DB.

Actually problem seems to be related when web publish to remote server. I tried local web publish to sql2014 db and it works.
For remote server web publish works to sql 2012 express db but when try with sql 2014 express db on same server get bellow error.
Error message "The database platform service with type Microsoft.Data.Tools.Schema.Sql.Sql120DatabaseSchemaProvider
is not valid. You must make sure the service is loaded, or you must provide the full type name of a valid database platform service."
Any ideea what may be causing it? I have installed the sql server 2014 express with advanced services x86, exact same version as on my local machine, and also restarted server after install. Need install/configure anything else on server like SSDT 2014 to
make this work?
Cheers!

Visual Studio 2013 - New Project

Hi
Many years ago I wrote a VB6 program for school students for diet analysis in terms of energy and a range of vitamins and minerals. It drew comparisons against the national guidelines. Results were tabulated, graphed and output provided in Word
and Excel files. The VB6 program used an Access database containing about 850 foods. It has been used by quite a few schools and appears to always be used across a network.
My intention is to re-write the whole program in Visual Studio 2013 using Visual Basic code. I intend to refresh the whole program and add a wider range of foods and update the comparisons using the latest national guidelines and food label formats.
This will be my first attempt at Visual Studio and I intend to use a Windows Forms Application approach. The data used is "static" - it does not change it is simply a "read only" file - get the data, multiply for mass and add up each
category (energy, vitamins and minerals). It is a "file of data" rather than a true database. In reality a 1000 food data file should only be about 200 Kbytes. As an Excel file it is only 150Kbytes but as an Access file it is bloated
up to a 550Kbyte file.
The program is not sophisticated, so, should I be using a WPF Application or a Window Forms Application? The WFA just feels a bit more familiar than a WPF. Also, the program is intended for loading onto a network at some schools or on a stand-alone
computer.
My greatest concern is about the choice of approaching the data. A "true" database is not needed because the data is simply for about 1000 rows of food each with about 20 columns of data (numeric and text). The Access file is simple
but I could create an mdf file (I think) but would that be an advantage? With the Access data I appear to have loaded the file and created a DataAdapter and I have experimented with GetData() which works. My attempts to use ExecuteReader() failed
completely. Is there a better approach? such as SQL "DataTable.Rows(RowPosition)(“column name")”?? It seems a very sophisticated method for a small file of data.
The Access Database that I have experimented with in VS2013 appears to use Jet Drivers???? which proved to create a few problems for installations in the past. Should I be using an mdf file approach?? I will need to distribute the data in a "resx"
file. I could use SQL Server Management Studio (free download) and then use VS2013 to read the Access file and build a new mdf database.....
I am not convinced that I have the best solution. Any comments and suggestions would be very greatly appreciated.
Many thanks for reading this far.
Winchestermili
Winchestermili

Frank
Looking good! The "attachment" to a new project worked first time.
I can see all the new Classes by hovering a pointer over the "declarations" above "Public Class Form1"
Seems to access the VBNetForum URL quite quickly using a high speed BB connection.
I am greatly looking forward to the next stage...........
Regards
Keith
Winchestermili
Keith,
I intentionally truncated that post with “let me know when you’re that far along” simply because it’s very easy to get lost
with a concept that’s new. This isn’t as different as you might think though – you’ve been using a database, and now you’ll be using instances of a class (various ones).
Over the years here, I’ve seen many times where people use databases because they assume “that’s the only way to do it”. The
“it” actually being encapsulation.
Encapsulation
is what they need and certainly a database provides that (and a lot more), but it’s not the only way it can be done.
Think about this a bit: A DataRow encapsulates the related data for whatever it is. For example maybe it’s a person’s data –
you’d want to keep the person’s first name, surname, and things like that all together because it defines something related to that one person. You then have a collection of those DataRows in a DataTable.
In much the same way, what I have here is similar: Instead of a DataRow, I’m using instances of a class. Instead of columns
in a DataRow, I’m using properties of the instance, and instead of a DataTable, I’m using a List(Of Class).
…the concept is identical.
Classes are a means of building an object in OOP. In and of itself, it’s really just a template or a blueprint (overused metaphor).
Deborah Kurata put it best, in my opinion, when she said that a class is like a cookie-cutter and the objects created are cookies. You eat the cookies, not the cookie-cutter!
A class works that way exactly: You can’t “consume” a class; you consume the objects (instances) created by them and in this
case, like a DataTable housing DataRows, I’m storing them in a very specific type of collection known as a List(Of T).
I don’t want to get too far adrift about classes and/or OOP here – not that I would mind the discussion – but it’s a new concept
to you and it’s easy to get confused about what’s doing what. I’ll get more to the specifics next.
That entire class library is the data layer; it doesn’t work with controls of any sort, only the data.
That said though, in the following I’ll explain how controls can be ‘assisted’ by the methods in the classes.
The main class in this is the one called “FoodComposition”. That one is only barely started – the
only
method in it so far is an overloaded way to add a new instance to a list of them.
Two of the classes are really just ‘supporting classes’ – those being the ones called “FoodCategory” and “LabelNote”. Don’t
get me wrong here, they do have methods in them (with more to be added), but you won’t too much be working with those in the user’s program – you will in the program that I’ll create for you to add/modify/remove* and so on, but for now let’s set those two
aside.
* The fact that these are “supporting” classes, I have it set up such that you cannot remove an instance of those if there’s
a reference to them in FoodComposition. If you want to see where/how I’m doing that, look at the code of the class FoodCategory, for example, and go to line 633, then read the code of that method named “Remove”.
The one class in the bunch which is pretty much self-contained is the one called DietaryReferenceValue (DRV is the name you
used). That one makes for a good topic to explain how I can provide methods which lend a helping hand to your controls but don’t, directly, have anything to do with controls.
I have a method in that class named “GetAllGroupNames” which is a function that returns a string array containing the names
of each instance’s group. That might be used, for example, if you wanted to show a ListBox or a ComboBox to allow the user to select one of the group names:
Private Sub Form1_Load(ByVal sender As System.Object, _
ByVal e As System.EventArgs) _
Handles MyBase.Load
Dim url As String = _
"http://www.fls-online.com/VBNet_Forum/12-13-14/NutritionData.xml"
GetNutritonData(url)
ListBox1.Items.AddRange(NutritionData.DietaryReferenceValue.GetAllGroupNames(drvList))
End Sub
So, for example, when the user selects one of them:
Private Sub ListBox1_SelectedIndexChanged(ByVal sender As System.Object, _
ByVal e As System.EventArgs) _
Handles ListBox1.SelectedIndexChanged
Try
If ListBox1.SelectedIndex > -1 Then
Dim selectedGroup As String = _
ListBox1.Items(ListBox1.SelectedIndex).ToString
Dim drv As NutritionData.DietaryReferenceValue = _
NutritionData.DietaryReferenceValue.GetInstance(drvList, selectedGroup)
MessageBox.Show(drv.ToString, drv.SexAndAgeGroup)
End If
Catch ex As Exception
MessageBox.Show("An error occurred:" & vbCrLf & vbCrLf & ex.Message, _
"Program Error", MessageBoxButtons.OK, _
MessageBoxIcon.Warning)
End Try
End Sub
As you can see there, I’m using the .ToString method which I have overridden in the class. That’s also part of what I wanted
to discuss: What it gets.
Currently I don’t have much else (other than maintenance routines like adding, removing, renaming) in there; the methods that
you use are methods that I set up – but in the words of Hamlet, “therein lies the rub” … I don’t know what you want!
Give some thought to just what methods you might want to have in there. For example maybe you might want to have a method which
will return the value of one specific nutrient which you specify. I can do that, I just don’t know yet that you want it so it’s not there.
Quite often I’ll also provide what I’m come to call “convenience properties”. For example with the property named “Sodium”,
I might have another property (read-only) named “Sodium_String” which returns a string in whatever format you wanted it to have.
These are things I don’t know that you want and also things which you may not have known can be done, thus this writing. ;-)
The other day I asked about units. It may not be where you want to go with this but I’d also like to offer that we can provide
more granularity to the nutrients themselves. Don’t get me wrong, it’d be an overhaul of what I have right now, but I’ll do it if you want to proceed:
Imagine that we have a class, all by itself, that we call “Nutrients”. At the very least that class would have members like
Name and UnitOfMeasure, but it could have anything else you wanted. An example that comes to mind might be the URL to a page on Wikipedia about it, or maybe a URL to an appropriate image or … whatever you dream of here.
So then when using them in the other classes, “Calcium” would, itself, be an object which has a name (“Calcium”), a unit-of-measure
(maybe “milligram”), and so on.
It’s a lot to take in all at once and even this is something you may want to reread, but do give it thought. Let me know what
methods you want in the classes which will help you in your user’s program.
Still lost in code, just at a little higher level.

Error when trying to publish in Flash 9

Hi,
I am currently working on a project in Flash and I can not
publish, test or view the action script. I have around 20 different
Flash files that I have created but only 2 work 100% fine. But last
week they were all working fine.
Here is the error code, AppName: flash.exe AppVer: 9.0.0.494.
I am not the only person to have this issue, as the link will
prove,
http://www.developmentnow.com/g/68_2007_9_0_0_1021366/Constant-error-message-Need-Help.htm
Does anyone know why this is happening? The only thing I can
think of doing is re-installing.

Carl,
Here's a screenshot of my project's Solution Explorer:
OK, so I have a file called "Resources.resx" and another folder down below called "Resources" which contains images. Which one should I rename and what do I do about possible errors that might pop up when I try to Build or Run the app?
Hello,
I mean the .resx file, but based on your screenshot, the Resources.resx file was generated by Visual Studio and it was not added by yourself, right?
This issue has beend discussed in the following thread, you could compare it with yours to narrow down this issue, since the error message shows that the project added duplicate data.
http://stackoverflow.com/questions/3003914/vs2010-an-item-with-the-same-key-has-already-been-added
You could follow that thread to check both the .resx file and the .csproj file to see whether there are duplicate data have been added.
Regards,
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Error when trying to debug in Visual Cafe

I get a class not found exception when I run the server in Visual Cafe.
Are there any clear directives on how to run the server (JDK 1.2.2, WIN NT)
in debug mode?
This is my class that I'm running and below is the error I receive.
Any help is greatly appreciated.
/Filip
public static void main(String[] args) {
String wlcl =
"d:\\weblogic\\classes;d:\\weblogic\\lib\\weblogicaux.jar;.;D:\\GetLuckyFast
\\release;d:\\weblogic\\classes;d:\\weblogic\\license;d:\\weblogic\\myserver
\\serverclasses;d:\\weblogic\\lib\\weblogicaux.jar;D:\\GetLuckyFast\\release
;D:\\GetLuckyFast\\release\\java_extensions\\cdkjava12_3210.jar;D:\\GetLucky
Fast\\release\\java_extensions\\jsdk.jar;D:\\GetLuckyFast\\release\\java_ext
ensions\\javax.ejb.zip;D:\\GetLuckyFast\\release\\java_extensions\\jndi.jar;
D:\\GetLuckyFast\\release\\java_extensions\\jms.jar;D:\\GetLuckyFast\\releas
e\\java_extensions\\javax_jts.zip;D:\\GetLuckyFast\\release\\java_extensions
\\mail.jar;D:\\GetLuckyFast\\release\\java_extensions\\dcxjp.zip;D:\\GetLuck
yFast\\release\\java_extensions\\activation.jar;D:\\GetLuckyFast\\release\\j
ava_extensions\\jaxp.jar;D:\\GetLuckyFast\\release\\java_extensions\\jcert.j
ar;D:\\GetLuckyFast\\release\\java_extensions\\jnet.jar;D:\\GetLuckyFast\\re
lease\\java_extensions\\jsse.jar;d:\\weblogic\\classes;c:\\jdk1.2.2\\lib\\to
ols.jar;D:\\GetLuckyFast\\release;D:\\GetLuckyFast\\release\\java_extensions
\\dcxjp.zip;D:\\GetLuckyFast\\release\\java_extensions\\mail.jar;D:\\GetLuck
yFast\\release\\java_extensions\\activation.jar;D:\\GetLuckyFast\\release\\j
ava_extensions\\jcert.jar;D:\\GetLuckyFast\\release\\java_extensions\\jnet.j
ar;D:\\GetLuckyFast\\release\\java_extensions\\jsse.jar;D:\\GetLuckyFast\\re
lease\\java_extensions\\jaxp.jar;D:\\GetLuckyFast\\release\\java_extensions\
\cdkjava12_3210.jar";
System.getProperties().put("weblogic.system.home","d:\\weblogic");
System.getProperties().put("classpath","C:\\jdk1.2.2\\lib\\tools.jar;d:\\web
logic\\license");
System.getProperties().put("weblogic.class.path",wlcl);
System.getProperties().put("registration.properties","D:\\GetLuckyFast\\rele
ase\\registration.properties");
System.getProperties().put("weblogic.system.name","myserver");
System.getProperties().put("java.security.manager","");
System.getProperties().put("java.security.policy","d:\\weblogic\\weblogic.po
licy");
try {
weblogic.Server.main(args);
} catch (Exception t) {
System.err.println(new java.util.Date() + "####**** ERROR
t.printStackTrace();
}//main
main (17:59:46): weblogic.ejb.common.DeploymentException: Deployment
Descriptor class could notbe found in ser file:
main (17:59:46): java.lang.ClassNotFoundException:
[Lweblogic.security.acl.User;
main (17:59:46): at
java.io.ObjectInputStream.inputArray(ObjectInputStream.java:806)
main (17:59:46): at
java.io.ObjectInputStream.readObject(ObjectInputStream.java:357)
main (17:59:46): at
java.io.ObjectInputStream.inputClassFields(ObjectInputStream.java:1831)
main (17:59:46): at
java.io.ObjectInputStream.defaultReadObject(ObjectInputStream.java:502)
main (17:59:46): at
javax.ejb.deployment.AccessControlEntry.readObject(AccessControlEntry.java:1
96)
main (17:59:46): at java.lang.reflect.Method.invoke(Native Method)
main (17:59:46): at
java.io.ObjectInputStream.invokeObjectReader(ObjectInputStream.java:1685)
main (17:59:46): at
java.io.ObjectInputStream.inputObject(ObjectInputStream.java:1165)
main (17:59:46): at
java.io.ObjectInputStream.readObject(ObjectInputStream.java:369)
main (17:59:46): at
java.io.ObjectInputStream.inputArray(ObjectInputStream.java:951)
main (17:59:46): at
java.io.ObjectInputStream.readObject(ObjectInputStream.java:357)
main (17:59:46): at
java.io.ObjectInputStream.inputClassFields(ObjectInputStream.java:1831)
main (17:59:47): at
java.io.ObjectInputStream.defaultReadObject(ObjectInputStream.java:502)
main (17:59:47): at
java.io.ObjectInputStream.inputObject(ObjectInputStream.java:1166)
main (17:59:47): at
java.io.ObjectInputStream.readObject(ObjectInputStream.java:369)
main (17:59:47): at
java.io.ObjectInputStream.readObject(ObjectInputStream.java:232)
main (17:59:47): at
weblogic.ejb.internal.EJBDeployment.setup(EJBDeployment.java:279)
main (17:59:47): at
weblogic.ejb.internal.EJBDeployment.setup(EJBDeployment.java:271)
main (17:59:47): at
weblogic.ejb.internal.EJBDeployment.<init>(EJBDeployment.java:232)
main (17:59:47): at
weblogic.ejb.internal.EJBManagerImpl.deploy(EJBManagerImpl.java:204)
main (17:59:47): at
weblogic.ejb.internal.EJBManagerImpl.deployBeans(EJBManagerImpl.java:354)
main (17:59:47): at
weblogic.ejb.internal.EJBManagerImpl.<init>(EJBManagerImpl.java:126)
main (17:59:47): at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java:1278)
main (17:59:47): at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:793)
main (17:59:47): at java.lang.reflect.Method.invoke(Native Method)
main (17:59:47): at
weblogic.Server.startServerDynamically(Server.java:87)
main (17:59:47): at weblogic.Server.main(Server.java:61)
main (17:59:47): at T3Debugger.main(T3Debugger.java:16)
main (17:59:47): at symantec.tools.debug.Agent.runMain(Native Method)
main (17:59:47): at symantec.tools.debug.MainThread.run(Agent.java:48)

Carl,
Here's a screenshot of my project's Solution Explorer:
OK, so I have a file called "Resources.resx" and another folder down below called "Resources" which contains images. Which one should I rename and what do I do about possible errors that might pop up when I try to Build or Run the app?
Hello,
I mean the .resx file, but based on your screenshot, the Resources.resx file was generated by Visual Studio and it was not added by yourself, right?
This issue has beend discussed in the following thread, you could compare it with yours to narrow down this issue, since the error message shows that the project added duplicate data.
http://stackoverflow.com/questions/3003914/vs2010-an-item-with-the-same-key-has-already-been-added
You could follow that thread to check both the .resx file and the .csproj file to see whether there are duplicate data have been added.
Regards,
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Network Error when trying to Publish to iWeb

My website was working very well until I made many changes a few weeks ago to my sites on iWeb. Then I had difficulty publishing again until I tried to shut down the program and found it needed to be updated. I updated iWeb and made changes to the website and because it would not let me publish to .Mac I published to a folder. Now, I can no longer publish to .Mac or a folder. I have tried again and agin to publish to iWeb but I continuously receive this Network Error: Publish failed due to a network error. Check your Internet connection and try again.
If anyone can help me that would be great!
Thanks...CCM in CR

Here's another piece of data on this problem. I have also been experiencing the Network Error when publishing, but only on a dialup connection. And in testing I found that if I removed the images from the site so that it contained only shapes and text, it would publish over dialup successfully. The original site including images publishes instantly on a machine at another location that has a DSL connection.
There doesn't seem to be any problem with line quality on the dialup connection, and the same machine that gets the Network Error on publishing from iWeb can sychronize to a .Mac account and use iDisk to backup images over that connection without any problems.
So these results seem to indicate that iWeb has some parameters around network timeouts that are restrictive depending probably on a combination of factors like size of data objects in the site file, network traffic and connection speed. It would be nice if a detailed transaction log could be generated that would pin down what is happening more precisely.
-Allan

Getting an error when trying to Publish the Schedule back to ERP in PS

Hi,
I am trying to release the Approved schedule back to ERP(“Release Schedule” option) from PS workbench but getting error messages like:
Error 1: PS\messageDictionary.txt doesnot exist
Error 2: An error occurred when trying to execute script:
c:\scp\8.12.1\ps\bin\..\..\commom\start\FileUploader_ps.bat C:\scp\8.12.1\ps\bin\..\..\..\data_stpre\5 5-gzip
Please advice
regards,
Praveena

Check the installation. Go to start --> All programs. verify that the folder avaialble is 'Oracle Supply Chain Planner'.
If you have JD Edward supply chain planner then you will not be able to publish back the schedule. There are 2 installers involved. In case of Oracle installer, it is silent installation and the instllation path is picked up from the profile option 'MSC:PS/SNO Installation path'.
In case of JD Edward installer, the PS installation wizard will open and you need provide the path. Remove PS from you client machine, clear java cache and try to download any model. If you have Oracle installer then model will open directly. If you get JD Edward installer, it will pen the wizard and you need to carry out installation steps manually. If you get JD Edward installers, you will not be able to publish back the schedule.

Unknown validation error when trying to publish Iweb

Im trying to publish my iweb page but it sends me to a mobile me login page. This has never happened since i first set up my mobile me. When I type in my password which is 7 characters then click on the login the password jumps to 12 characters and I get an unknown validation error. Any ideas
Message was edited by: WorshipPastor

This is from the Account page of the MobileMe website. I'm unable to update my website right now and I believe this must be the reason.
System Status
* MobileMe System Preferences on Mac OS X
* MobileMe members may be unable to sign in to MobileMe in Mac OS X System Preferences. Normal service will be restored ASAP. We apologize for any inconvenience.

Why do I get a 'Certutil: A referral was returned from the server' error when trying to publish my renewed Offline Root CRL to AD?

Hi,
I renewed my Offline Root CA and now trying to publish the CRL to AD on my Sub Issuing CA with the Certutil -dspublish command, however I get a 'Certutil: A referral was returned from the server' error. Kinda makes sense cause the Offline Root CA is
not on the network, so then how do I publish my renewed CRL to AD given this?
Thanks for your help! SdeDot

Looks like your CRL do not include Active Directory container specification and certutil don't know where to publish the CRL.
Does root CA define LDAP url in CDP extension? If not, then you don't need to publish CRL in Active Directory, because no one will use it.
Vadims Podāns, aka PowerShell CryptoGuy
My weblog: en-us.sysadmins.lv
PowerShell PKI Module: pspki.codeplex.com
PowerShell Cmdlet Help Editor pscmdlethelpeditor.codeplex.com
Check out new: SSL Certificate Verifier
Check out new:
PowerShell File Checksum Integrity Verifier tool.

Error When Trying To Publish In Visual Studio 2013 C# Project

Similar Messages

Maybe you are looking for