Error when trying to start the ToolsAndFrameworks to access Endeca workbenc

Hi All,
I am getting the below error when trying to start the ToolsAndFrameworks.
Starting Workbench (background process)
The BASEDIR environment variable is not defined correctly
This environment variable is needed to run this program
Regards
SK

Hi SK,
This occurs in those cases where the Endeca environment variables are not set properly. Make sure all the Endeca environment variables are set before starting the Tools services.
Executing the 'mdex_setup_ini' and 'installar_sh.ini' will setup the Endeca environment variables. Below are the commands for the same.
source /local/endeca/MDEX/6.3.0/mdex_setup_sh.ini
source /local/endeca/PlatformServices/workspace/setup/installer_sh.ini
HTH,
Mahesh

Similar Messages

[SOLVED] Errors when trying to start the X

When I try to start x using startx command , I get three lines with errors (taken from /var/log/Xorg.0.log) :
(EE) Failed to load module "vesa" (module does not exist, 0)
(EE) Failed to load module "modesetting" (module does not exist, 0)
(EE) Failed to load module "fbdev" (module does not exist, 0)
Last edited by skiabox (2012-11-17 00:07:27)

It is usually under /etc/X11 when using the proprietary driver, but you are using the open source driver.
You could see if the radeon driver is loaded with this command
# lsmod | grep radeon
if it is not, you can try to load it manually with
# modprobe radeon
and see if you get any errors...
edit:
For some reason I thought your X failed to start. If it works, you can forget about the above
Last edited by drobole (2012-11-16 22:55:02)

I get an error that says that LR5 encounterd a preview cach error when trying to start LR5 and that it will try to fix it the next time it starts. What can I do to fix this error?

I get an error that says that LR5 encountered a preview cache error when trying to start LR5 and that it will try to fix it the next time it starts. What can I do to fix this error?

Go to the folder with you Lightroom Catalog (usually in Pictures) and delete the folder ending in .lrpreviews
This contains the previews for the files Lightroom has linked to. They will need to be rebuilt which can be done while working or selecting an amount you want to rebuild and accessing the rebuild command in the Library Dropdown menu...

Dns error when trying to start ssgd 4.4

Hi,
I get the following error when trying to start a fresh install of SSGD 4.4 on sun solaris 10 sparc machine
bash-3.00# /opt/tarantella/bin/tarantella start
Starting Secure Global Desktop server (version 4.40.917). Please wait...
2008/05/12 18:34:43.082 (pid 27580) server/common/fatalerror #1210597482966
Sun Secure Global Desktop Software (4.4) FATAL ERROR:
The configured DNS name of the server (unknown) couldn't be
resolved in DNS.
The server can't start.
Check your DNS configuration.
I tried changing the servername in the httpd.conf file but still get the above errors. What could be the possibel reasons for this error.
Thanks,

Hi,
I changed the peerdns name to "penguin.everett.nl"
Cbash-3.00# /opt/tarantella/bin/tarantella status
Array members (1):
- penguin.everett.nl (primary): NOT ACCEPTING CONNECTIONS.
bash-3.00#
However, when I now start the tarantella I get the following error :
bash-3.00# /opt/tarantella/bin/tarantella stop
Secure Global Desktop services are not currently running.
bash-3.00# /opt/tarantella/bin/tarantella start
Starting Secure Global Desktop server (version 4.40.917). Please wait...
javax.naming.NameNotFoundException: asad.properties [Root exception is java.io.FileNotFoundException: /opt/tarantella/var/serverconfig/global/beans/asad.properties]
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at com.sco.jndi.toolkit.provider.SimpleContinuation.getSimpleException(SimpleContinuation.java:62)
at com.sco.jndi.toolkit.provider.SimpleContinuation.getSimpleException(SimpleContinuation.java:82)
at com.sco.jndi.toolkit.provider.ToolkitContext.namingException(ToolkitContext.java:386)
at com.sco.jndi.toolkit.provider.ToolkitContext.namingException(ToolkitContext.java:401)
at com.sco.jndi.toolkit.provider.ToolkitContext.nameNotFound(ToolkitContext.java:436)
at java.lang.Thread.run(Thread.java:619)
Caused by: java.io.FileNotFoundException: /opt/tarantella/var/serverconfig/global/beans/asad.properties
at com.sco.jndi.provider.file.FileCacheObject.<init>(FileCacheObject.java:62)
at com.sco.jndi.provider.file.FileCacheObject.<init>(FileCacheObject.java:39)
at com.sco.jndi.provider.file.FileCache.lookup(FileCache.java:83)
at com.sco.jndi.provider.file.FileCache.lookup(FileCache.java:68)
at com.sco.jndi.provider.file.FileContext.child(FileContext.java:612)
at com.sco.jndi.provider.file.FileContext.f_lookupLink(FileContext.java:889)
... 12 more
java.io.IOException: Failed to load all Beans : javax.naming.NameNotFoundException: asad.properties [Root exception is java.io.FileNotFoundException: /opt/tarantella/var/serverconfig/global/beans/asad.properties]
at com.sco.tta.server.server.JServer.<init>(JServer.java:327)
at TTAServer.run(TTAServer.java:391)
at java.lang.Thread.run(Thread.java:619)
bash-3.00# /opt/tarantella/bin/tarantella status
Array members (1):
- penguin.everett.nl (primary): NOT ACCEPTING CONNECTIONS.
bash-3.00#

WDS Server Service won't start - 'An error occurred trying to start the Windows Deployment Services Server.'

I'm having issues installing starting the WDS server service on Win 2008 R2, this is happening on multiple (all 2008 R2) systems on this domain so I'm beginning to think it's either AD or network related, in event viewer I get the following error.
'An error occurred trying to start the Windows Deployment Services Server.'
Error Information: 0x0906
EventID : 257
single domain, single forest, 2008 R2 functional level, both system are virtual plugged into same vswitch on a flat network.
any ideas what might be the issue? I've never had an issue getting this working on many occasions before today and I've come to many a dead end looking at other articles thus far...
With WDS tracing enabled I get the following error information:
[4304] 09:22:11: ===>Starting logging of module [WDSServer]
[4304] 09:22:11: [UDPPorts] Policy: 1, Dynamic Port Range: 64001-65000.
[4304] 09:22:11: [RPC] Using Tcp Port 5040 for Rpc Calls.
[4304] 09:22:11: [RPC] Client Impersonation Logging=Disabled
[4304] 09:22:11: [RPC] Host Name: sccm.domain.local
[4304] 09:22:11: [RPC] NTLM/Kerberos Spn: ldap/sccm.domain.local
[4304] 09:22:11: [RPC] Initialized
[3756] 09:22:11: [RPC] Server Started.
[4304] 09:22:11: [BINLSVC][RPC][Ep={5F4FB9F0-C0E3-41C1-AA00-9A7C690AC3A3}] Registered
[4304] 09:22:11: [BINLSVC] Provider Initialized.
[4304] 09:22:11: [WDSDDPS][RPC][Ep={FA0A27E1-C2BA-4B3B-94B2-025E82FFAA6D}] Registered
[4304] 09:22:11: [WDSDDPS][RPC][Ep={011D24AC-CB3A-4739-A339-5D2E1B5306CE}] Registered
[4304] 09:22:11: [51][WDSDDPS] [d:\w7rtm\base\ntsetup\opktools\wds\ddp\server\ddpprovider.cpp:196] Expression: , Win32 Error=0x906
[4304] 09:22:11: [WDSDDPS][RPC][Ep={FA0A27E1-C2BA-4B3B-94B2-025E82FFAA6D}] Closed
[4304] 09:22:11: [WDSDDPS][RPC][Ep={011D24AC-CB3A-4739-A339-5D2E1B5306CE}] Closed
[4304] 09:22:11: [d:\w7rtm\base\ntsetup\opktools\wds\wdssrv\server\src\wdsprovider.cpp:144] Expression: , Win32 Error=0x906
[4304] 09:22:11: [WDSDDPS] Initialization Failed (rc=2310)
[4304] 09:22:11: [d:\w7rtm\base\ntsetup\opktools\wds\wdssrv\server\src\wdsprovhdl.cpp:172] Expression: , Win32 Error=0x906
[4304] 09:22:11: [WDSDDPS] Deleted.
[4304] 09:22:11: [d:\w7rtm\base\ntsetup\opktools\wds\wdssrv\server\src\wdsservice.cpp:178] Expression: , Win32 Error=0x906
[4304] 09:22:11: [Udp] Listen Shutdown.
[3756] 09:22:11: [RPC] Server terminated (rc=0)
[4304] 09:22:11: [RPC] Listen Stopped.
[4304] 09:22:11: [BINLSVC] Shutting down
[4304] 09:22:11: [BINLSVC][RPC][Ep={5F4FB9F0-C0E3-41C1-AA00-9A7C690AC3A3}] Closed
[4304] 09:22:11: [BINLSVC] Deleted.

It seems I've found out the solution myself, the issue seems to be caused when DHCP and WDS are on the same server, The installation must identify this during the first installation of WDS but not on subsequent installations, the method to
get it working again is:
1.
Install WDS Role (using defaults)
2.
Make the following registry change:
HKLM\SYSTEM\CurrentControlSet\services\WDSServer\Providers\WDSPXE\UseDhcpPorts = 0
3.
Run the following command line to initialize Windows Deployment Services:
wdsutil /initialize-server /reminst:D:\RemoteInstall
4.
Run the following command to enable the DHCP port registry setting
wdsutil /Set-Server /UseDHCPPorts:No /DHCPOption60:Yes

Error when trying to start Apache Chemistry Workbench (./workbench.sh)

Hi colleagues,
when trying to start the Apache Chemistry Workbench with ./workbench.sh (as described in Unit 4 of Week 3 of the SAP HANA course), i'am getting the following error:
Can someone please help me?
Thanks and regards
Thorsten

Hi Dieter,
yes, that solved the problem. I'am using MKS Toolkit under Windows, so that i can use the bash in the command prompt. I thought wrong. ;-) With the batch file it works fine.
Thanks
Thorsten

Facing problem when trying to start the addon manually

Hi,
I have created an add-on using simple addon installer project. The prepared addon has been installed successfully. After installation, when trying to start the addon manually by Add-On Manager,
The addon exe is giving an error message at the line when try to instantiate the SboGuiApi.
"SAPbouiCOM.SboGuiApi SboGuiApi = new SAPbouiCOM.SboGuiApi();"
The error message is -
"Could not load file or assembly 'Interop.SAPbouiCOM, Version=6.8.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified."
and finally it gives an error message "Add-On connection timed out".
Note: At the development end we have tested it on our two systems its working properly. But on the production system its giving the error
Please help!! its urgent...
Regards,
Ashok

Hi suresh,
I have tried it number of times, but the problem not been addressed yet.
Or can you please clearify what exactly do you mean by UIAPI.
What we have did at our end is -
Just removed the SAPbouiCOM.dll from the references and add it again.
"I am using SBO 2005A SP01 PL-31"
If you have any more ideas please reply back
Thanks for prompt response
Regards,
Ashok

I'm getting a -2003F error when trying to run the internet recovery after installing a new hard disk in my macbook pro, any suggestions?

After installing a new hard drive in my 2011 macbook pro, I'm getting a apple.com/support -2003F error when trying to run the internet recovery. Any suggestions?

Did you format the new HDD? What is the status of the old HDD?
Do you have an early or late 2011 MBP?
Ciao.

I keep getting an error when trying to receive the new update iOS7 on iPhone5. Any suggestions?

I keep getting an error when trying to receive the new update iOS7 on iPhone5. Any suggestions?

Do the update using iTunes on your computer.
Plug your iPhone into iTunes (current version), let it sync, then click "Check for Updates" on the iPhone's summary page in iTunes.

I am getting an error when trying to download the new Game of Thrones shows. The error is err = -61 You do not have the privilege to make changes. (err = -61) you do not have the privilege to make changes. I have not had this problem before

I am getting an error when trying to download the new Game of Thrones shows. The error is err = -61 You do not have the privilege to make changes. (err = -61) you do not have the privilege to make changes. I have not had this problem before

Solution:
Open Disk Utility.
Select your external hard disk and run a “verify” on it. After a few minutes (depending on the size of your drive), you should be good to go. You don’t need to run a “repair” on it... (at least I didn’t have to). See photo for reference.
This should fix the permissions issue, because on my Mac running Mountain Lion I was unable to edit the permissions in the get info dialog window even after "unlocking" the drive.

I get an error when trying to open "The application Creative Cloud can't be opened. -1712

I get an error when trying to open "The application Creative Cloud can't be opened. -1712

The application Install.app can't be opened. -1712

Error when trying to refresh the current report-Invalid prompt def.WIS00005

I am trying to create a Webi report using a Universe created with Universe Design Tool 4.0. I have created a new universe with a secured relational connection from a cube in our BBD system. The Universe can be created and exported in UDT (and when I test the connection, I get a message saying the server is responding). I can see values for the BEx query in BEx analyzer.
When I open Webi and connect to a universe, I can see the universe, but when I put a dimension to our results tab and go to "run query", I first get the error "Error when trying to refresh the current report". If I close this error I get the error "Invalid Prompt Definiton - WIS00005". Has anybody else had this issue and if so, where can I begin to troubleshoot the error?

Hi,
Please note that if the object parses at Universe level it may still fail at runtime especially for the prompts.
If you still experience the error after applying Patch 11 please analyze the characteristics of the prompt, get some trace logs with High level of detail, they surely will help.
Thanks!
Best regards,
Simone

Error when trying to refresh the current report

I am having this error message "Error when trying to refresh the current report on my reports appear before they are executed. It has been a very random so I am unable to pinpoint what is causing it. I am currently working with BO 4.1 and it is connected to BW, whereby the authentication is SSO.
Either way the reports are able to run with problems but I dislike having to insist with the refresh button or having to close and reopen the report for it to run as it should.
I did some investigations but did not find anything conclusive because there is no problems with authorizations, there are no merged dimensions nor grouping variables used in the report and it is based on just one query.
Does anyone know why this error message appears? What its cause is?

Hi
While creating the report if we select the authentication mode as :Use specified user name and password or Use Business Objects credential mapping, will get the same error.
So if possible can you please test change Connection Type Authentication Mode to Single Sign on.
Find the below link.
http://scn.sap.com/community/semantic-layer/blog/2014/06/06/how-to-change-connection-type-authentication-mode-to-sso-1

"please use setup.exe for installation instead of blackberry desktop software.msi" error when trying to install the software through 610_b038_multilanguage.exe

"please use setup.exe for installation instead of blackberry desktop software.msi" error when trying to install the software through 610_b038_multilanguage.exe
I need to install this so that i can transfer my contacts and calendar to my laptop

Hi and Welcome to the Community!
Sorry to be dense, but what happens when you do exactly as the message instructs?
Thanks!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Always getting a server error when trying to download the products

I' always getting a server error when trying to download the products since yesterday, what can I do ?

Try using a different browser

Error when trying to start the ToolsAndFrameworks to access Endeca workbenc

Similar Messages

Maybe you are looking for