Facing problem when trying to start the addon manually

Hi,
I have created an add-on using simple addon installer project. The prepared addon has been installed successfully. After installation, when trying to start the addon manually by Add-On Manager,
The addon exe is giving an error message at the line when try to instantiate the SboGuiApi.
"SAPbouiCOM.SboGuiApi SboGuiApi = new SAPbouiCOM.SboGuiApi();"
The error message is -
"Could not load file or assembly 'Interop.SAPbouiCOM, Version=6.8.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified."
and finally it gives an error message "Add-On connection timed out".
Note: At the development end we have tested it on our two systems its working properly. But on the production system its giving the error
Please help!! its urgent...
Regards,
Ashok

Hi suresh,
I have tried it number of times, but the problem not been addressed yet.
Or can you please clearify what exactly do you mean by UIAPI.
What we have did at our end is -
Just removed the SAPbouiCOM.dll from the references and add it again.
"I am using SBO 2005A SP01 PL-31"
If you have any more ideas please reply back
Thanks for prompt response
Regards,
Ashok

Similar Messages

Error when trying to start the ToolsAndFrameworks to access Endeca workbenc

Hi All,
I am getting the below error when trying to start the ToolsAndFrameworks.
Starting Workbench (background process)
The BASEDIR environment variable is not defined correctly
This environment variable is needed to run this program
Regards
SK

Hi SK,
This occurs in those cases where the Endeca environment variables are not set properly. Make sure all the Endeca environment variables are set before starting the Tools services.
Executing the 'mdex_setup_ini' and 'installar_sh.ini' will setup the Endeca environment variables. Below are the commands for the same.
source /local/endeca/MDEX/6.3.0/mdex_setup_sh.ini
source /local/endeca/PlatformServices/workspace/setup/installer_sh.ini
HTH,
Mahesh

Problems when trying to update the free version of Adobe Reader Updater 11.0.00 on Windows 8. There

Problems when trying to update the free version of Adobe Reader Updater 11.0.00 on Windows 8. There is something to fix.??

Have you tried http://ardownload.adobe.com/pub/adobe/reader/win/11.x/11.0.03/misc/AdbeRdrUpd11003.msp ?

Problem when trying to start Weblogic server

Hi,
I have a problem when in was trying to start the weblogic server from the
Weblogic Console.It Loads all the necessary files and finally it comes out
giving an error "Server start message not received in allotted time, server
process killed.".
But at the same time i can start the server cooly by running the
"Wlserver.exe".Can any help me on this problem
regards
Ramesh
Baan Company

Hi!
I'm quite sure that this is a time out problem. I need about 3 minutes to start
up my weblogic server. It's no problem to start it from a command prompt
(startWeblogic.cmd), but using weblogic console application I always got a time
out after 120 seconds. On a faster computer, where the start up process can be
finished in less then 120 seconds it was no problem to start the server with the
same amount of EJBs.
Does anyone know how to increase the time out parameter for the weblogic console
application?
Best reagards,
Przemek
Ramesh wrote:
Yes Its resource problem i suppose..
My friend who is working with WL advised me to us 128 MB RAM to work with
Weblogic server.
Justin i need one more help
I registered my servlet in Weblogic.properties.But when i try to load
it from the command tab says "Property change error on LOAD".I dont know
what
properties i have to change to load this.
Even the existing example servlets i coundnt Load.!!!!
Can any one help on this problem
Justin Knowlden <[email protected]> wrote in message
news:[email protected]...
I actually got WL to work on my system yesterday. I found that it was aresource
problem. I had to shut down my X Server; if you don't know what the XServer is,
it's (basically) the app that runs a window manager. It was consuming toomuch
of my processing time. WL is now the only thing running on that machine.
Since you have NT, You may want to try shutting down all uneccesarydevices and
app's.
Ramesh wrote:
My System is
Win NT 4.00
Pentium pro 199 mhz
and 80 mb RAM
Is that because of the Memory Problem?
I dont know because i am able run it well when it trought command
prompt.
Justin Knowlden <[email protected]> wrote in message
news:[email protected]...
I posted a comment about this last week and have to receive a reply. Ialso saw
a post from April about this and there were no replies to it, either.
My problem exists on Linux whether I use the console or not. What are
the
specs
for your machine?
Mine:
Linux 2.2.15
P/Pro 199 MHx
128 MB RAM
Ramesh wrote:
Hi,
I have a problem when in was trying to start the weblogic server
from
the
Weblogic Console.It Loads all the necessary files and finally it
comes
out
giving an error "Server start message not received in allotted time,server
process killed.".
But at the same time i can start the server cooly by running the
"Wlserver.exe".Can any help me on this problem
regards
Ramesh
Baan Company--
Justin Knowlden <[email protected]>
Software Developer
MyPoints.com, Inc.
Justin Knowlden <[email protected]>
Software Developer
MyPoints.com, Inc.
Przemyslaw Rychlewski Tech@Spree Software Technology GmbH
mailto:[email protected] http://www.tech.spree.de
Tel +49 (0)30 235 520-34 Bülowstrasse 66
Fax +49 (0)30 217 520-12 10783 Berlin

[Solved] Font problem when trying to start qmon (sun grid engine)

When I tried to start the qmon (queue monitor program), the error message show up as below:
[root@sge01 ~]# qmon
Warning: Cannot convert string "-adobe-helvetica-medium-r-*--14-*-*-*-p-*-*-*" to type FontStruct
Warning: Cannot convert string "-adobe-helvetica-bold-r-*--14-*-*-*-p-*-*-*" to type FontStruct
Warning: Cannot convert string "-adobe-helvetica-medium-r-*--20-*-*-*-p-*-*-*" to type FontStruct
Warning: Cannot convert string "-adobe-helvetica-medium-r-*--12-*-*-*-p-*-*-*" to type FontStruct
Warning: Cannot convert string "-adobe-helvetica-medium-r-*--24-*-*-*-p-*-*-*" to type FontStruct
Warning: Cannot convert string "-adobe-courier-medium-r-*--14-*-*-*-m-*-*-*" to type FontStruct
Warning: Cannot convert string "-adobe-courier-bold-r-*--14-*-*-*-m-*-*-*" to type FontStruct
Warning: Cannot convert string "-adobe-courier-medium-r-*--12-*-*-*-m-*-*-*" to type FontStruct
Warning: Cannot convert string "-adobe-helvetica-medium-r-*--10-*-*-*-p-*-*-*" to type FontStruct
X Error of failed request: BadName (named color or font does not exist)
Major opcode of failed request: 45 (X_OpenFont)
Serial number of failed request: 514
Current serial number in output stream: 525
[root@sge01 ~]#
I have all the fonts from the official depository installed (verified by the command # pacman -Ssq font ). I use LXDE and the system has been updated.
Is there anything I can do to run this program?
Last edited by teetee1 (2013-08-28 04:24:40)

Thanks for the link. I was able to solve the font errors quickly, which is great!
Unfortunately some other errors remain:
X Error of failed request: BadName (named color or font does not exist)
Major opcode of failed request: 45 (X_OpenFont)
Serial number of failed request: 478
Current serial number in output stream: 489
I've tried to follow instructions from the links below:
http://ubuntuforums.org/showthread.php?t=1778584
http://www.edaboard.com/thread139363.html
But realized I already have the xorg- 100dpi and 75dpi fonts by checking with the pacman command: pacman -Ssq 100dpi (and 75dpi).
Any help is greatly appreciated.

Runtime :Javascript problem when trying to display the date binded to RFC

Hi all,
I am facing a very strange problem. I Have used a Bapi to pass some inputs to the Bapi function and binded the UI with that. But for the date field when i am running the application and trying to specify some date it is giving some Javascript Error and not Showing the date Dialog box
The Error is "SAPUR_January is null or not an object"
Is anyone has any idea on it, then please let me know at the earliest.
Mukesh

Hi armin and Mani
For armin: I did't understand for what you are refering to.
For Mani: Hi mani those are the Input fields and by default they are binded to the Date field only and user has to supply the date parameter. The Small box that comes when you bind a UI field with the Date type when i am clicking on that i am reciving that error.
Mukesh Poddar

Problem when trying to start BEx Analyzer (7.0)

Hello - We have completed an upgrade of a sandbox to NetWeaver BI 7.0 (from BW 3.5) and we are getting ready to have users start to test to find functionality issues. When I start Business Explorer (7.0), it opens Excel (2003) with no problem and the menu appears and the icons appear to be active. However, when I mouse over any of the menu items, the text is in German, and if I click on any of them nothing happens. I have run the sapbexc710.xla spreadsheet and it comes up with some yellows (version on PC is higher than expected), but no reds.
Is there a known solution to this? This is the first time we have tried to run the 7.0 version of BEx Analyzer, but we have been using the 3.5 version for a couple of years.
Any assistance is greatly appreciated!
Regards,
Blair Towe

Hi,
You need to install this support package.....bi710sp05_500-10004472
Regards
Prasad Nannuri

How can I solve the Error 110 problem when trying to modify the Description of Properties of PDF?

Hello!
I am trying to modify the Description of the PDF fies but I cannot do for some files because of the Error 110. How can I solve this problem so I can succesfully modify the Description of the Properties of the PDF files?
I also have one more question!
Why is it impossible to modify the Description parts when the File name is missing in the Description? There is a File name on each individual PDFs but some of them have to File names on the Description!
Thank you very much in advance!

Noelia, i have the same problem, did you solved it ?I had the same issue as Noelia when I investigated Noelia's issue originally (see the TwoVideos sample application in this thread: Re: How can I play different videos with only one MediaPlayer?
I tried running the TwoVideos sample application today on Windows XPsp3, JavaFX 2.1b17, JDK7u4ea and I was unable to reproduce the problem, so it is likely fixed either 2.1 or (less likely I believe) a Windows 7 only related issue.
http://www.oracle.com/technetwork/java/javafx/downloads/devpreview-1429449.html
If you can reproduce the issue with the latest developer preview, then log a bug at http://javafx-jira.kenai.com with environment details, steps, sample media and code to reproduce the issue.
Please contact me ainchilc at gmail dot com.If it is an answer to an unanswered question on a public forum, it is best to post the answer on the forum, then everybody who reads the forum will know what the answer is.

I get "ordinal 5 (and at times 18) is not found when trying to start the application? Using windows Vista Business.

when starting the application I get the following message "ordinal 5 ( and at times 18) can not be found in the dynamic link libray" I'm using a Lenovo x300 with "Vista Business"

Have you tried to put the Main-Class under a package (e.g. move LaunchSimulator to org.jyothi.sunke.LaunchSimulator or something)? I'm not sure but it's possible that Main-Class can't be located in the "root package", because the JAR launcher can't address it.
Always put your stuff in a package, otherwise it can't be addressed by other packaged classes.
- Erik

Authorisation problem when trying to see the data after loading

HI Everyone,
I loaded data in quality. when i am trying to see the data, i am getting the following messages
1.Your user master record is not sufficiently maintained for object Authorization Object for Plant
2.System error: RSDRC / FORM AUTHORITY_CHECK USER NOT AUTHORIZED ZCOPC_C21 ZCOPC_C21
3.System error: RSDRC / FUNC RSDRC_BASIC_CUBE_DATA_GET ERROR IN RSDRC_BASIC_QUERY_DATA_GET ZCOPC_C21 64
4.System error: RSDRC / FORM DATA_GET ERROR IN RSDRC_BASIC_CUBE_DATA_GET ZCOPC_C21 64
Can any one of you tell whether it is a transport issue or some authorisation problem. Guide me how to solve this.
Thanks in advance for your help.

Hi,
After you get this error goto Tcode SU53 and then you'll get the object and activity for that auth object.
You can then go and check if this is enabled in your auth profile using SUIM tcode and going to users.
If its enabled then you need to check for values if you have authorization to display data for that particular plant.
This is an auth issue and you should get approval from the appropriate person in order for you to look at the Master data and then have the Security or Basis team grant you access to the same.
Cheers,
Kedar

Facing problems when trying to access sites

Hi
I am able to open the page when I tried in web browser
but when I am trying to access the site using the below code it is failed
import java.net.*;
import java.io.*;
public class URLParser {
public static void main(String[] args) throws Exception {
          URL mysite = new URL("https://hostname:9045/maximo/");
URLConnection yc = mysite.openConnection();
          BufferedReader in = new BufferedReader(
new InputStreamReader(
yc.getInputStream()));
          String inputLine;
while ((inputLine = in.readLine()) != null)
System.out.println(inputLine);
in.close();
error message
Exception in thread "main" javax.net.ssl.SSLHandshakeException: com.ibm.jsse2.ut
il.h: PKIX path building failed: java.security.cert.CertPathBuilderException: un
able to find valid certification path to requested target
at com.ibm.jsse2.n.a(n.java:39)
at com.ibm.jsse2.jc.a(jc.java:188)
at com.ibm.jsse2.db.a(db.java:134)
at com.ibm.jsse2.db.a(db.java:328)
at com.ibm.jsse2.eb.a(eb.java:4)
at com.ibm.jsse2.eb.a(eb.java:287)
at com.ibm.jsse2.db.m(db.java:208)
at com.ibm.jsse2.db.a(db.java:259)
at com.ibm.jsse2.jc.a(jc.java:271)
at com.ibm.jsse2.jc.g(jc.java:403)
at com.ibm.jsse2.jc.a(jc.java:21)
at com.ibm.jsse2.jc.startHandshake(jc.java:228)
at com.ibm.net.ssl.www2.protocol.https.b.afterConnect(b.java:167)
at com.ibm.net.ssl.www2.protocol.https.c.connect(c.java:42)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLCon
nection.java:943)
at com.ibm.net.ssl.www2.protocol.https.a.getInputStream(a.java:73)
at URLParser.main(URLParser.java:9)
Caused by: com.ibm.jsse2.util.h: PKIX path building failed: java.security.cert.C
ertPathBuilderException: unable to find valid certification path to requested ta
rget
at com.ibm.jsse2.util.f.b(f.java:60)
at com.ibm.jsse2.util.f.b(f.java:81)
at com.ibm.jsse2.util.e.a(e.java:8)
at com.ibm.jsse2.yb.checkServerTrusted(yb.java:55)
at com.ibm.jsse2.hb.checkServerTrusted(hb.java:9)
at com.ibm.jsse2.eb.a(eb.java:299)
... 12 more
Caused by: java.security.cert.CertPathBuilderException: unable to find valid cer
tification path to requested target
at com.ibm.security.cert.PKIXCertPathBuilderImpl.buildCertPath(PKIXCertP
athBuilderImpl.java:379)
at com.ibm.security.cert.PKIXCertPathBuilderImpl.engineBuild(PKIXCertPat
hBuilderImpl.java:195)
at java.security.cert.CertPathBuilder.build(CertPathBuilder.java:215)
at com.ibm.jsse2.util.f.b(f.java:62)
... 17 more
Press any key to continue . . .

chakribobby wrote:
Caused by: java.security.cert.CertPathBuilderException: unable to find valid cer
tification path to requested targetThis exception is caused (almost always I believe) by certificates that Java can't validate with someone Java trusts. For example a self-signed certificate. Which is probably what is happening here.

An error occured when trying to start the virtual machine

I am getting an error whn trying to start an hyperv vm. The error is shown attached. any idea?

Hi,
Please confirm you dismount that guest VM disk first and did you install the AV soft on Hyper-V host? If yes, also please try to disable the AV soft then try to start the
guest vm again.
More information:
Antivirus and Hyper-V (or: Why can’t I start my virtual machine?)
http://blogs.msdn.com/b/virtual_pc_guy/archive/2009/03/17/antivirus-and-hyper-v-or-why-can-t-i-start-my-virtual-machine.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Problems when trying to access the folio builder

Hi I am not able to access my account by folio builder panel (Mac).
When I click in the popp sig to enter my account information does not open.
See what happens in the video: http://www.youtube.com/watch?v=9UgQ-YToObQ&feature=youtu.be
Indesign Cs6
Thank you.

I've never seen that before. Here are a couple of things you can try.
* Reset preferences while relaunching InDesign.
* Quit InDesign and any other CS apps. Delete the opm.db file located in /Users/"your user name"/Library/Application Support/Adobe/OOBE/opm.db. (You might need to hold down Option and choose Go > Library in Finder if system files are hidden.) Then start InDesign and try signing in to the panel.

Problem when trying to install the Catalyst 8.2 on Satellite A200-1KB

Hi,
recently I did have to change back to Windows XP, since I was having problems running some old stuff that I have and I need to run it.
The laptop has an ATI Mobility Radeon HD 2400, and I have installed the Windows XP 32 Professional, so I have downloaded the correct drivers but when im installing them I get an error that say or the driver isnt for my Windows or isnt for my Hardware aka Graphic Card :(
Since I like games I would like to have the lasted driver install on the Laptop so I can play them whitout any problems, but I cant install the last driver for it.
Thanks for your help in advance :D

Hi friend,
Ive read your post and one question about I am curios is: Where did youve downloaded the graphics driver? From the ATI homepage??
If yes, then I can tell you: the drivers from there would NEVER work since you have a special mobile chipset and not a desktop graphics card.
In such case (if you want to have the latest drivers) you will have to visit:
http://www.laptopvideo2go.com
or
http://www.omegadrivers.net/
because there and ONLY THERE you can get some modified drivers which will run on your mobile system. But install them on your own risk!!
GReetings

Mail crashing when trying to start the app.

Never had this problem until I updated the os to the latest security update a few days ago (May 26 or so). When starting up the Mail program I see the screen coming up and before having any time to do anything it just quits on me. Nothing on my system has changed. Any other people having the same problems? Any possibility to just re-install or repair the mail program without loosing any of the data?
...miakel

Did Mail start crashing immediately after installing the Security Update or a few days later? It could very well be that Mail is crashing while trying to load a message with bad HTML content.
1. Launch Mail holding the Shift key down until the main window appears. This should prevent Mail from trying to select any mailboxes or load any messages upon starting up.
If Mail doesn't crash now, then you know there is a troublesome message somewhere, and you'll have to find it and get rid of it:
2. Go to Mail > Preferences > Viewing and disable "Display remote images in HTML messages" if it's enabled -- having this setting enabled is a really bad idea for spam-related reasons anyway.
3. If the preview pane is visible in the main Mail window, drag the horizontal separator bar between the messages list pane and the message preview pane to the bottom of the window, or just double-click within the separator bar, so that the preview pane disappears and only the messages list is visible. This prevents Mail from trying to load a message when it is selected in the messages list pane.
4. You should now be able to select the message that's causing Mail to crash and delete it.
5. If you want to make the preview pane visible again, drag the horizontal separator bar up from the bottom of the window, or just double-click it again.

Facing problem when trying to start the addon manually

Similar Messages

Maybe you are looking for