Error when updating Client Access Front End Service to Exchange 2013 Update 6

When updating to Exchange 2013 Update 6 we received the following error at the Step 11 of 13: Client Access role: Client Access Front End service step:
Error:
The following error was generated when "$error.Clear();
$fe = get-ActiveSyncVirtualDirectory -server $RoleFqdnOrName -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
if ($fe -eq $null)
new-ActiveSyncVirtualDirectory -DomainController $RoleDomainController -Role ClientAccess;
else
update-ActiveSyncVirtualDirectory $fe -DomainController $RoleDomainController -InstallIsapiFilter $true
" was run: "System.Management.Automation.ParameterBindingException: Cannot convert 'System.Object[]' to the type 'Microsoft.Exchange.Configuration.Tasks.VirtualDirectoryIdParameter' required by parameter 'Identity'. Specified method is not supported. ---> System.NotSupportedException: Specified method is not supported.
at System.Management.Automation.ParameterBinderBase.CoerceTypeAsNeeded(CommandParameterInternal argument, String parameterName, Type toType, ParameterCollectionTypeInformation collectionTypeInfo, Object currentValue)
--- End of inner exception stack trace ---
at System.Management.Automation.Internal.PipelineProcessor.SynchronousExecuteEnumerate(Object input, Hashtable errorResults, Boolean enumerate)
at System.Management.Automation.PipelineOps.InvokePipeline(Object input, Boolean ignoreInput, CommandParameterInternal[][] pipeElements, CommandBaseAst[] pipeElementAsts, CommandRedirection[][] commandRedirections, FunctionContext funcContext)
at System.Management.Automation.Interpreter.ActionCallInstruction`6.Run(InterpretedFrame frame)
at System.Management.Automation.Interpreter.EnterTryCatchFinallyInstruction.Run(InterpretedFrame frame)".
Problem was that if you have more than one ActiveSyncVirtualDirectory, the installer for Update 6 fails because it's not expecting an array of virtual directories to be returned. Solution is to remove the "extra" virtual directory, perform the
installation, and then re-add the virtual directory.
None of the other types of virtual directories are susceptible to this, only ActiveSync.

Hi,
Please try to reset registrar state:
http://tsoorad.blogspot.in/2013/04/lync-2013-ee-pool-wont-start.html
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Kent Huang
TechNet Community Support

Similar Messages

401 Unauthorized Error When calling a SharePoint REST web service from SharePoint 2013 Workflow

We have our Workflow Manger installed on the same server as our SharePoint 2013 WFE development environment. When creating a SharePoint 2013 Workflow all Calls to a SharePoint 2013 REST web service results in a 401 Unauthorized error.
As an example I created a simple workflow that should return a JSON result. The REST Url returns the results in the browser without error.
Set Variable:webServiceUrl to https://<hostnamedsitecollection>/_vti_bin/client.svc/web/lists/getbytitle('ISR%20Approvers')/Items?$select=Title&$filter=Title%20eq%20%27General%27
then Build{...} Dictionary (Output to Variable:requestHeaders)
then Call [%Variable:webServiceUrl%] HTTP web service with request (ResponseContent to Variable:responseContent |ResponseHeaders to responseHeaders | ResponseStatusCode to Variable:responseCode)
The RequestHeader is set to the requestHeaders variable though the web service call properties
then Log Variable:responseCode to the workflow history list
After manually running the workflow in SharePoint on a list item in the ISR Approvers list it Logs "Unauthorized" in the Workflow History Log. It does this with every SharePoint REST web service call that I have tried through the workflow.
It doesn't have anything to do with the Workflow Manger being installed on the same machine as the SharePoint WFE does it?
Thank You for any insight

Hi,
According to your post, my understanding is that you had 401 Unauthorized Error when calling a SharePoint REST web service from SharePoint 2013 Workflow.
Please make sure you use the ‘Call HTTP Web Service’ correctly.
You can enter the URL into the brower to check whether it is correctly.
You need to
create the Request header requestHeaders
using a Dictionary:
Accept : application/json;odata=verbose
Content-Type : application/json;odata=verbose
To associate the
requestHeaders variable, select the Call action
property, set the RequestHeaders property to
requestHeaders.
Please refer to the following articles:
Working with Web Services in SharePoint 2013 Workflows using SharePoint Designer 2013
Calling the SharePoint 2013 Rest API from a SharePoint Designer
Workflow
In addtion, you need to make sure you install the workflow manager correctly.
More information:
Install and configure workflow for SharePoint Server 2013
Known Issues in Workflow Manager 1.0
Troubleshooting Workflow Manager 1.0 Management and Execution
Best Regards,
Linda Li
Linda Li
TechNet Community Support

HTTP error when trying to access RESTful web service from application

Hi,
We are getting the following error when trying to access a RESTful web service coming from Apex workspace 4.2.1 and Apex listener 2.1:
ORA-29273: HTTP request failed ORA-06512: at "SYS.UTL_HTTP", line 1130 ORA-29024: Certificate validation failure
In the Debug report, besides the above I also see:
error_backtrace: ORA-06512: at "SYS.UTL_HTTP", line 1130 ORA-06512: at "APEX_040200.WWV_FLOW_WEB_SERVICES", line 543 ORA-06512: at "APEX_040200.WWV_FLOW_WEB_SERVICES", line 1164 ORA-06512: at "APEX_040200.WWV_FLOW_PROCESS", line 396
We get that error whether we use https or http in the URI pointing to the web service. When I test the Web Service in Workspace RESTful service GUI, I get the data back. When I go build an application with a report calling the RESTful Web Service I get that error. Both the Application and the Workspace RESTful services are on the same Apex environment and even the same workspace.
What is odd is that I can actually put the URL of the web service into a browser and I get the data: (using the demo hr data in sample RESTful services.)
IN browser-- https://weblogic-dev.edu/apex/ace/hr/empinfo/
yields:
7839,KING,PRESIDENT,,1981-11-17T05:00:00Z,5000,,10 7698,BLAKE,MANAGER,7839,1981-05-01T04:00:00Z,2850,,30 7782,CLARK,MANAGER,7839,1981-06-09T04:00:00Z,2450,,10 7566,JONES,MANAGER,7839,1981-04-02T05:00:00Z,2975,,20 7788,SCOTT,ANALYST,7566,1982-12-09T05:00:00Z,3000,,20 7902,FORD,ANALYST,7566,1981-12-03T05:00:00Z,3000,,20 7369,SMITH,CLERK,7902,1980-12-17T05:00:00Z,800,,20 7499,ALLEN,SALESMAN,7698,1981-02-20T05:00:00Z,1600,300,30 7521,WARD,SALESMAN,7698,1981-02-22T05:00:00Z,1250,500,30 7654,MARTIN,SALESMAN,7698,1981-09-28T04:00:00Z,1250,1400,30 7844,TURNER,SALESMAN,7698,1981-09-08T04:00:00Z,1500,0,30 7876,ADAMS,CLERK,7788,1983-01-12T05:00:00Z,1100,,20 7900,JAMES,CLERK,7698,1981-12-03T05:00:00Z,950,,30 7934,MILLER,CLERK,7782,1982-01-23T05:00:00Z,1300,,10
Any ideas on what would be causing the Error above in our application?
Thanks,
Pat
Edited by: patfmnd on Mar 11, 2013 3:25 PM
In reviewing the above error, I think we are realizing that we have to have the Weblogic layer SSL cert (actually the CERT from our BigIP load balancer which also does our SSL termination) imported into the Oracle server wallet where Apex is installed. Am I correct?
PM

We resolved our problem. The Apex Administrative Guide made us realize that we had to set up Wallet path in the Instance. This required working with DBAs to follow the Advanced networking guide to get the wallet set up on our server. We then added that path to the Instance configuration. (Manager Instance --> Instance settings). We ran into another other issue related to our implementation of CAS but were able to resolve that, and 'voila' were able to get the sample RESTful service consumed by our application!!
Now to the task of figuring out how to get Basic Auth working between client application and RESTful web service. If anyone has that working, let us know!!
It would be helpful if in the documentation of the Apex 2.x listener or Apex install/configuration there was clear reference to the above steps required for HTTPS access to RESTful web services.
Pat

Error when adding MB servers to a DAG in Exchange 2013

Hello,
I have already pre-staged my CNO in active directory. I also have created my DAG in exchange 2013. When I try to add my mailbox servers to my DAG, I receive the following error. I also tried to install the Failover Clustering feature manually, but I received
the same following error. Could you please assist me with this?
<label style="font-weight:bold;">ERROR</label>
A server-side database availability group administrative operation failed. Error Failed to add or remove the Failover-Clustering feature. Error: The request to add or remove features on the specified server failed. Installation of one or more roles, role
services, or features failed. Error: 0x800f0922 .
Pooriya Aghaalitari

Hi,
From the error message, it seems that the issue is related to failover clustering feature.
What’s your Windows version?
Based on
this article, if you're installing the Mailbox server role and you intend for the server to be a member of a database availability group (DAG), you must be running Windows Server 2012 R2 Standard or Datacenter Edition, Windows Server 2012 Standard or Datacenter
Edition, or Windows Server 2008 R2 SP1 Enterprise Edition. Windows Server 2008 R2 SP 1 Standard Edition doesn't support the features needed for DAGs.
Please make sure you meet this requirement.
Best regards,
Belinda Ma
TechNet Community Support

Front-End Service Starup Error: Store procedure to GET progress vector failed.

Hi,
We have a two front end servers in our Lync deployment and I'm getting an interesting error message on one of the servers when the "Lync Server Front-End Service" is starting up. All the services on that server will eventually start but I'm pretty
sure it's affecting users in some way.
Here is the error message in the Event Viewer:
Log Name:      Lync Server
Source:        LS User Services
Date:          2013-09-17 8:00:32 AM
Event ID:      32194
Task Category: (1006)
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      BGC-VAN-LYNC2.domain.ca
Description:
Store procedure to GET progress vector failed.
Execution Error: 0x00000000(ERROR_SUCCESS).
Native Error: 8144.
Error Details: [# [Microsoft][SQL Server Native Client 11.0][SQL Server]Procedure or function SyncReplicationGetProgressVector has too many arguments specified. #].
Cause: This may indicate a problem with connectivity to local database or some unknown product issue.
Resolution:
Ensure that connectivity to local database is proper. If the error persists, please contact product support with server traces.
Event Xml:
<Event xmlns=>
<System>
    <Provider Name="LS User Services" />
    <EventID Qualifiers="50158">32194</EventID>
    <Level>2</Level>
    <Task>1006</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2013-09-17T15:00:32.000000000Z" />
    <EventRecordID>16971</EventRecordID>
    <Channel>Lync Server</Channel>
    <Computer>BGC-VAN-LYNC2.domain.ca</Computer>
    <Security />
</System>
<EventData>
    <Data>0x00000000(ERROR_SUCCESS)</Data>
    <Data>8144</Data>
    <Data>[# [Microsoft][SQL Server Native Client 11.0][SQL Server]Procedure or function SyncReplicationGetProgressVector has too many arguments specified. #]</Data>
</EventData>
</Event>
The error happens 15 times every minute, following with this event:
Name:      Lync Server
Source:        LS User Services
Date:          2013-09-17 8:23:46 AM
Event ID:      32189
Task Category: (1006)
Level:         Information
Keywords:      Classic
User:          N/A
Description:
The following Fabric service for routing groups have been closed:
{F515134C-71B7-52FD-B0C3-6A9DB39CF750}
{8A5D6B36-2A01-53DB-BC4E-3286C05E0836}
{B35AAFC9-F6BF-5FFE-8C31-4AA5C36B2065}
{69223418-78DC-5066-81A8-78E05914EC7B}
{80414C96-1137-5DDC-8387-C3EA7A54B078}
{641E6ABD-B862-55A1-B1B1-C83BC92D2F85}
{1EA68EA4-77F7-5CFC-B781-0093CBC18403}
{2FDE333D-FF7F-5D6A-B85B-93ADC1EAC12A}
{A43BBA3A-8963-51C4-BD7A-19E1EC3DDFDB}
{D3F4532F-61C8-5072-9B3B-3E2CCF15442F}
{4449243E-5E96-56AC-AB6B-C5E785543542}
{58B30261-65B6-5F6A-BC50-60F85782D052}
{DB4B76B0-2510-5BF8-A7B1-8B37BD3AA7B9}
{917CC217-966B-56AC-A912-97BA64BA13EB}
Anyone knows what this is about and how to resolve this?
Thanks,
VH.

Hi,
Please try to reset registrar state:
http://tsoorad.blogspot.in/2013/04/lync-2013-ee-pool-wont-start.html
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Kent Huang
TechNet Community Support

The Lync Server Front-End service terminated with service-specific error %%-1008124893.

Hello, everyone
I've installed Lync Server 2010. There was no error during installation. But when i start Lync Server Front End Server, i'm getting following error:
The Lync Server Front-End service terminated with service-specific error %%-1008124893.
In event viewer:
The evaluation period for Microsoft Lync Server 2010 has expired. Please upgrade from the evaluation version to the fully licensed version of the product. Look at help for Setup.exe to learn how to upgrade from evaluation version to the licensed version.
Cause: The evaluation period for Microsoft Lync Server 2010 has expired.
I've upgraded Lync Server according to http://technet.microsoft.com/en-us/library/gg521005.aspx?ppud=4
Also I've installed all Lync Server updates.
But I still could not start Lync Front End Sever. How can I solve this problem?
Thanks

Hi,
Can you try to run
start-cswindowsservice -report c:\report.html
and post the report so we can have more information about your problem ?
Regards,
Adrian TUPPER - ABC Systemes - http://thelyncexperience.blog.com/ If answer is helpful, please hit the green arrow on the left, or mark as answer Thank you

Design Question: Can I use Rest-CsPoolRegisterState command in order start Front End Service when Quorum is lost and less than 85% of FES are available?

Hi,
Assuming below setup for Enterprise edition Lync 2013
Single Pool Stretched architecture with 4 FES servers
Site A Data Center
Site B Data Center
FES
2
2
SQL
1 Primary
1 Mirror
Fact: In a situation when we lose network connectivity to Site A DC, and due to less than 50% FES servers, Quorum will be lost and as a result Front End Service will stop after 5 minutes.
The question is, would I be able to do a manual intervention by using this command
Reset-CsPoolRegistrarState –PoolFqdn <pool name fqdn> –ResetType QuorumLossRecovery , and start FES with just 2 FES servers in Site B DC and 1 SQL
Server?
The reason I am asking this question is because it is mentioned in one of the Lync manuals that at least 85% of the servers must be available to recover once the Quorum has lost. The same manual also mentions to use above
mentioned command in order to recover from Quorum Loss despite the fact that the lost FES servers are still not available.
Thanks in Advance

Hi,
In Lync server 2013 Stretched pools are not supported for the Front End, Edge, Mediation, and Director server roles. It need two Lync pools.
If one pool fail to connect, An administrator can declare an emergency and fail over the pool to the backup pool. That is done by using the:
Invoke-CsPoolFailover –PoolFQDN <Pool fqdn> –DisasterMode –Verbose
More details:
http://blog.avtex.com/2012/07/26/understanding-lync-2013-server-failover/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information
found there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Error when trying to access Shared Services Console

When trying to access the Shared Services Console, I recieved an error message which indicated that an error had occured while performing this operation. http://localhost:28080/interop/jsp/config/defaultError.jsp. The error message from the diagnostics reports indicate that the error has to do with the SSO service error: java.net.ConnectException: Connection refused: connect.
I am installing EPM 11.1.1.2 Hyperion 9.5
Any ideas would be great.

Make sure the Shared Services from the Services have been started and the Database configured with the Shared Services is up.

Lync Front-end service won't start

Hello everybody
I have this error when a I try to start Lync front-end service:
Failed starting a worker process.
Process: 'C:\Program Files\Microsoft Lync Server 2013\Server\Core\RtcHost.exe' Exit Code: C3E8302D!_HRX! (The worker process failed to initialize itself in the maximum allowable time.!_HRM!).
Cause: This could happen due to low resource conditions or insufficient privileges.
Resolution:
Try restarting the server. If the problem persists contact Product Support Services.
event id: 12330 source LS Server
and
An exception caused the process to stop.
Exception Details. System.ApplicationException: Failed to start Fabric Pool Manager.
at Microsoft.Rtc.AppDomainHost.Launcher.Initialize(String[] args)
at Microsoft.Rtc.AppDomainHost.Launcher.Main(String[] args)
Cause: Check the eventlog description.
Resolution:
Examine prior event log entries to find and resolve the problem. If the problem persists contact product support.
event ID 500006 Source LS AppDomain Host Process
When I try this powershell command Reset-CsPoolRegistrarState -ResetType QuorumLossRecovery -poolfqdn poolfqdn
I have this message
Reset-CsPoolRegistrarState : Could not connect to any server in Pool lync2013servername during Phase 1.
At line:1 char:1
+ Reset-CsPoolRegistrarState -ResetType QuorumLossRecovery
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (:) [Reset-CsPoolRegistrarState], Exception
+ FullyQualifiedErrorId : Error resetting fabric state. For details, see inner exception.,Microsoft.Rtc.Management.Hadr.ResetPoolFabric
StateCmdlet
Can you help me please

Have you check your Sql database? Maybe a problem with correct accessing the SQL Database.
How looks you Lync pool? Enterprise, Standard, how much FE server?
regards Holger Technical Specialist UC

How to implement Oracle user/role security with Access front end?

Hi,
We have successfully migrated our Access database tables to Oracle 10g using SQL developer. We've recreated all the users and roles(i.e., access groups) in Oracle and granted rights to tables.
In the Access front end database, in the Database window we have saved linked Oracle tables which replaced the Access tables. The forms, reports, queries run fine with the linked Oracle tables. All the linked table use one ODBC DSN to the Oracle database with the same Oracle user id.
We need to be able to authenticate users into the Oracle database and RE-link the tables based on their own unique user id. By during so we can allow users to use the Oracle standard user id/role and system privileges to control select, update, ect. rights to the database.
I've been able to use the VB code within Access to logon into the database with a unique id, but I have not been able to find out how to RE-link the tables to the unique user id using VB. There should be some way to relink tables dynamically, based on users login into the Access front end.
I don't know a great deal about Access projects, but I do know with SQL server allows login into your Access project and link tables dynamically.
Can someone give me some assistance or point me in the right direction?
Thanks in advance,
Larry

We had one of our programmers here come up with a VB code solution for re-linking table within Access. However the relinking takes 3-4 minutes for 100+ tables.
In an effort to help you understand the situation better, I will attempt to elaborate on the problem:
We have an Access 2003 application which currently has a front end using Access(forms, reports, queries, & VB code) and a MS Access 2003 backend.
We have migrated the backend tables to Oracle. However, we still have a need to maintain the front end in Access, since we have over 60 forms, 40 reports, 200+ queries in Access. Its easy to understand, we have a significant investment in the front end(Obviously, the plan is to migrate the front end also at some future date).
In order to utilized the existing front end, we have to validate and modify the current front end connections to the new Oracle backend. One of the features of Access is that you can "link" tables and save the link for runtime. Each Access table can have its own link which is a separate ODBC/JET connection. As such, each separate link has its own userid/database information.
The other issue with using the Access front-end is that Access utilizes a workgroup file to implement user and group security. The workgroup file contains all the users and which groups the users belong to in Access. Then within Access, you allow users access to object(tables, queries, ect) by their userid and or group. When users open an Access database with Access security enabled, they are required to log into Access. The login is authenticated by the workgroup file. Once, logged into Access, users have rights to Access objects based on their rights granted to their userid and groups they belong. The problem here is that when you remove the linked Access tables and replace them with linked Oracle tables, Access has knowledge about Oracle table rights granted to users; nor would you expect it to.
The dilema is the disconnect between Access and the fact Oracle utilizes a similar but much more sophisticated security model. It creates users and roles(which are similar to Access groups), and again this is independent of Access security.
Our solution was to still use the Access workgroup file security along with the Oracle security model. By using the Access userid and then creating a similar Oracle userid with similar table rights granted in Access, you could apply security within Access and also with the Oracle database.
For example, a user BOB logs into Access via the workgroup file, using VB code, Access then establishes a Oracle connection logining into Oracle using the same unique userid BOB into Oracle.
After connecting and validating user BOB into Oracle, then the Access tables are relinked to Oracle using the user BOB userid and table rights.
This Oracle userid has been granted table rights specific for this userid.This allows the user BOB to use the Access application and still be authenticated into the Oracle database.
The problem with this solution is that the relinking of the saved Access tables takes 3-7 minutes for about 100+ tables. This is not acceptable for users each time they log into the application.
Our current alternative is to use one Oracle userid to login each user, and use Access form restrictions/security to allow/prevent users from updating/viewing data. Obviously, this is not the optimal solution in respect to security, but it at least allows us to control access to the data(via the forms) by using one logon required for each user, and quick startup time for the application.
I understand SQL server does a better job in integration, but we use Oracle which is what I am trying to work with.
Larry

Error when trying to access the RBAC User editor and Message tracking

Hi,
I am getting an error when trying to access the RBAC User editor and Message tracking on the Web Mgmt interface. I verified that the admin account trying to access is in the Organization Management group and has the correct Role Assignment Policy applied.
I searched through this thread below and saw that matching the msExchRoleLink and msExchUserLink attributes fixed the issue.
https://social.technet.microsoft.com/Forums/exchange/en-US/fc568cc6-8691-4127-b70b-bcc82f9b1f7f/first-2010-cas-server-no-administrator-rights-emc-permissions-gone?forum=exchange2010
However I have another environment where this is not the case and works just fine; the msExchUserLink attribute has a value of CN=Organization Management,OU=Microsoft Exchange Security Groups,DC=Domain,DC=Local which is different as per the issue outlined in
the above thread so I am not convinced that this will work and also don’t want to blindly edit something in adsiedit without being sure.
I then checked the event logs on the server and saw the below error logged;
Current user: 'Domain/Server Services Accounts/administrator'
Request for URL 'https://server.domain.com/ecp/default.aspx?p=AdminDeliveryReports&exsvurl=1' failed with the following error:
System.Web.HttpUnhandledException: Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.Exchange.Management.ControlPanel.UrlNotFoundOrNoAccessException: The page may not be available or you might not have permission to open the
page. Please contact your administrator for the required credentials. For new credentials to take effect, you have to close this window and log on again.
at Microsoft.Exchange.Management.ControlPanel._Default.CreateNavTree()
at Microsoft.Exchange.Management.ControlPanel._Default.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
--- End of inner exception stack trace ---
at System.Web.UI.Page.HandleError(Exception e)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)
at ASP.default_aspx.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Microsoft.Exchange.Management.ControlPanel.UrlNotFoundOrNoAccessException: The page may not be available or you might not have permission to open the page. Please contact your administrator for the required credentials. For new credentials to take effect, you
have to close this window and log on again.
at Microsoft.Exchange.Management.ControlPanel._Default.CreateNavTree()
at Microsoft.Exchange.Management.ControlPanel._Default.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
I then had a look at the IIS permissions for ecp and owa. The account did not have permissions so I added them there but still got the same error. I’ve also tried all of the above with a newly-created account but still got the same issue.
Any ideas as to what the above event log is specifically referring to?

Hi,
From your description, I would like to clarify the following thing:
If you want to search message tracking logs, the account you use should be a member of the role groups below:
Organization Management role group, Records Management role group, Recipient Management role group.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Login error when trying to access iCloud Mail

I am receiving the following error when trying to access iCloud Mail. All other iCloud services are functioning.
IS FATAL
true
APPLICATION NAME
mail
TITLE
Mail could not be loaded
MESSAGE
There was a problem loading the application due to a possible network error or missing resources. Please try again.
LOG
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: MAIL in main()
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: Creating local CK.User object
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: Creating local CK.AccountPreferences object
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: --> Request 1:   POST to https://p03-mailws.icloud.com:443/wm/preference?clientBuildNumber=15B.9bb3ce9&cl ientId=523F12B2-FC11-4D72-952C-A9AA1C424022&dsid=103705688, headers: Content-Type=text/plain, body: (omitted)
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: ----------------> Request out: /wm/preference-list-->1425991198034/1
wmsid: null
params: {"locale":"en-us","timeZone":"US/Central"}
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: SC.Object:sc1473:dispatch('load content')
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: "2.0 Waiting for Content" handled event 'load content' (no transition)
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: SC.Object:sc2647:dispatch('noContent')
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG:   "6.2 pop up View" handled event 'noContent' with a transition to "6.2.2 No Content"
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG:     -> entering "6.2.2 No Content"
Tue, 10 Mar 2015 12:39:58 GMT: WARN: REJECTING SERVER RESPONSE CoreMail.MailRequest.willReceive:
Status:0
Request:/wm/preference
Wmsid:null
Redirect Count:1
Timeout Redirect Count:1
ResponseText:
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: --> Request 2:   POST to https://p03-mailws.icloud.com:443/wm/preference?clientBuildNumber=15B.9bb3ce9&cl ientId=523F12B2-FC11-4D72-952C-A9AA1C424022&dsid=103705688, headers: Content-Type=text/plain, body: (omitted)
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: ----------------> Request out: /wm/preference-list-->1425991198034/1
wmsid: null
params: {"locale":"en-us","timeZone":"US/Central"}
Tue, 10 Mar 2015 12:39:58 GMT: ERROR: GIVING UP ON RETRIES, CoreMail.MailRequest.willReceive:
responseText: ,
this._redirectCount: 1
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: <-- Response 2: 0 (72ms), headers:   body: (empty)
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: <---------------- Request in: /wm/preference-list-->1425991198034/1,httpStatus: 0,round trip time: 71ms, wmsid: null
Tue, 10 Mar 2015 12:39:58 GMT: ERROR: retrieveResponseError:
ServerPreferencesDataSource.retrieveResponse
error:-1/0
guid:serverPrefsGuid
Tue, 10 Mar 2015 12:39:58 GMT: ERROR: Bootstrap error: Preferences.RefreshError
TYPE
server
APP STATECHART
SC.Statechart:sc1030
initialized: true
name: cloudos-statechart
current-states: [
    active.springboard.displayingSpringboard.springboard
state-transition:
    active: false
    suspended: false
handling-event: false
BUILD NUMBER
15B.169e9f7
TIME
Tue Mar 10 2015 07:40:01 GMT-0500 (CDT)        (1425991201489)
HOST
www.icloud.com
USER AGENT
Mozilla/5.0 (Macintosh; Intel Mac OS X 10_10_2) AppleWebKit/600.3.18 (KHTML, like Gecko) Version/8.0.3 Safari/600.3.18
DSID
103705688
ENVIRONMENT
PROD
RECENT LOG MESSAGES
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: MAIL in main()
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: Creating local CK.User object
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: Creating local CK.AccountPreferences object
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: --> Request 1:   POST to https://p03-mailws.icloud.com:443/wm/preference?clientBuildNumber=15B.9bb3ce9&cl ientId=523F12B2-FC11-4D72-952C-A9AA1C424022&dsid=103705688, headers: Content-Type=text/plain, body: (omitted)
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: ----------------> Request out: /wm/preference-list-->1425991198034/1
wmsid: null
params: {"locale":"en-us","timeZone":"US/Central"}
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: SC.Object:sc1473:dispatch('load content')
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: "2.0 Waiting for Content" handled event 'load content' (no transition)
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: SC.Object:sc2647:dispatch('noContent')
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG:   "6.2 pop up View" handled event 'noContent' with a transition to "6.2.2 No Content"
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG:     -> entering "6.2.2 No Content"
Tue, 10 Mar 2015 12:39:58 GMT: WARN: REJECTING SERVER RESPONSE CoreMail.MailRequest.willReceive:
Status:0
Request:/wm/preference
Wmsid:null
Redirect Count:1
Timeout Redirect Count:1
ResponseText:
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: --> Request 2:   POST to https://p03-mailws.icloud.com:443/wm/preference?clientBuildNumber=15B.9bb3ce9&cl ientId=523F12B2-FC11-4D72-952C-A9AA1C424022&dsid=103705688, headers: Content-Type=text/plain, body: (omitted)
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: ----------------> Request out: /wm/preference-list-->1425991198034/1
wmsid: null
params: {"locale":"en-us","timeZone":"US/Central"}
Tue, 10 Mar 2015 12:39:58 GMT: ERROR: GIVING UP ON RETRIES, CoreMail.MailRequest.willReceive:
responseText: ,
this._redirectCount: 1
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: <-- Response 2: 0 (72ms), headers:   body: (empty)
Tue, 10 Mar 2015 12:39:58 GMT: DEBUG: <---------------- Request in: /wm/preference-list-->1425991198034/1,httpStatus: 0,round trip time: 71ms, wmsid: null
Tue, 10 Mar 2015 12:39:58 GMT: ERROR: retrieveResponseError:
ServerPreferencesDataSource.retrieveResponse
error:-1/0
guid:serverPrefsGuid
Tue, 10 Mar 2015 12:39:58 GMT: ERROR: Bootstrap error: Preferences.RefreshError

After activatin iCloud, my dotMac account wouldn't retrieve mail anymore. It kept saying that my username or password were not good. No matter how many times I tried, I couldn't restore the service.
Here's how I got it working again.
Apparently my 6 letter password is no longer acceptable. You need to update it to an 8 letter password that includes numbers and capital letters.
So I went to https://iforgot.apple.com and asked to reset my password.
Because I could still get my emails logging into iCloud with Safari, I responded to Apple's email, and created a stronger password.
Than I updated the passwords on my computer's Mail program, iPhone, and iPad (and of course everything else, iTunes, etc.).
That was it!
Everything works as normal again, I even was finally able to synchronize calendars over different computers again.
Try it out, it could be your issue as well.

Front End Service is not starting

Hi ,
Any one can help me to resolve this issue.
I have one enterprise edition front end server .if i try to start the front end service it give the following error
Server startup is being delayed because fabric pool manager is initializing.
Cause: This is normal when Pool is bootstrapped and indicates that the Front-End is waiting for a quorum of other Front-Ends to be started.
Resolution:
If this event recurs persistently, ensure that 85% of the Front-Ends configured for this Pool are up and running. For 2 or 3 machine Pools, initial cold-start of the Pool requires all machines to be started. If multiple Front-Ends have been recently decommissioned,
run Reset-CsPoolRegistrarState -ResetType QuorumLossRecovery to enable the Pool to recover from Quorum Loss and make progress.

If understand the problem Correctly You one Lync enterprise edition installed is that right?
If yes Please note For a recommended Lync Server 2013 EE pool deployment, there should be at least three Lync Server 2013 front-end servers in the EE pool.
http://technet.microsoft.com/en-us/library/gg412996.aspx
We recommend that all your Enterprise Edition Front End pools include at least three Front End Servers
Also refer Why 3 server pool?
http://social.technet.microsoft.com/Forums/lync/en-US/1e277415-01b0-4123-a5bc-260909368d5b/why-3-server-pool?forum=lyncdeploy
If you just want one Lync server please install Lync Standard Edition
Front End Pools with Two Front End Servers
We do not recommend deploying a Front End pool that contains only two Front End Servers. If you do ever need to deploy such a pool, follow these guidelines:
If one of the two Front End Servers goes down, you should try to bring the failed server back up as soon as you can. Similarly, if you need to upgrade one of the two servers, bring it back online as soon as the upgrade is finished.
If for some reason you need to bring both servers down at the same time, do the following when the downtime for the pool is finished:
The best practice is to restart both Front End Servers at the same time.
If the two servers cannot be restarted at the same time, you should bring them back up in the reverse order of the order they went down.
If you cannot bring them back up in that order, then use the following cmdlet before bringing the pool back up:.
Reset-CsPoolRegistrarState -ResetType QuorumLossRecovery -PoolFQDN <FQDN>
Please remember, if you see a post that helped you please click ;Vote As Helpful" and if it answered your question please click "Mark As Answer"
Regards Edwin Anthony Joseph

Error when trying to access a form through https

Hi,
I'm facing this error when trying to access a form through https, i'm using OAS10g 10.1.2.3 over linux, it has webutil configured and is working perfectly with https
I'm accessing the form through webcache.
the error:
Java Plug-in 1.6.0_37
Usar versión JRE 1.6.0_37-b06 Java HotSpot(TM) Client VM
Directorio local del usuario = C:\Users\Carlos
c:   borrar ventana de consola
f:   finalizar objetos en la cola de finalización
g:   liberación de recursos
h:   presentar este mensaje de ayuda
l:   volcar lista del cargador de clases
m:   imprimir sintaxis de memoria
o:   activar registro
q:   ocultar consola
r:   recargar configuración de norma
s:   volcar propiedades del sistema y de despliegue
t:   volcar lista de subprocesos
v:   volcar pila de subprocesos
x:   borrar antememoria del cargador de clases
0-5: establecer nivel de rastreo en <n>
cargar: clase oracle.forms.webutil.common.RegisterWebUtil no encontrada.
java.lang.ClassNotFoundException: oracle.forms.webutil.common.RegisterWebUtil
     at sun.plugin2.applet.Applet2ClassLoader.findClass(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadClass0(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadClass(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadCode(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager.createApplet(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Excepción: java.lang.ClassNotFoundException: oracle.forms.webutil.common.RegisterWebUtil
cargar: clase oracle.forms.engine.Main no encontrada.
java.lang.ClassNotFoundException: oracle.forms.engine.Main
     at sun.plugin2.applet.Applet2ClassLoader.findClass(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadClass0(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadClass(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadCode(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager.createApplet(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Excepción: java.lang.ClassNotFoundException: oracle.forms.engine.Mainwhat could be the reason it can not find the webutil libraries with https ?? i tried erasing the java's cache but still the same error :(
Regards
Carlos

I got it, i only had to check the option 'Use SSL 2.0 compatible ClientHello format' from the java's control panel advanced tab.
Metalink's note: 787739.1
:)

How can I use an Access front end and Access button to control a LabView Shared variable boolean?

My company has invested a lot of money on the office network to write many many access databases and front ends. I'm looking for a way to tie a button on an access front end to toggle a LabView boolean shared variable to notify me when they changed something on their side of the network. I'm not seeing anything that helps on a web or forum search. They don't like the idea of a separate labview control that they have to push a button on to let me know.
Thanks
Solved!
Go to Solution.

Hi Patrick,
While this is not the intended purpose of Network-Published Shared Variables, you might be able to accomplish this by writing separate accessor VIs for reading from and writing to the variable, making sure to wire the inputs and outputs. Then, you could build a DLL, making sure that you include the accessor VIs as Exported VIs and include the DLL Library in the Always Included section of the DLL Build Specifications. During this process, you will define the function prototype, which will provide the function call, required parameters, and return values. Once the DLL is created, you can then call it and its functions from another programming language (C, C++, C#, VB, etc.). This may or may not work, but it is the only way that I can think of at this point. I have included some references that may help you in this process.
Building a Shared Library in LabVIEW (White Paper)
Calling LabVIEW VIs from Other Programming Languages (White Paper)
Calling LabVIEW DLL From C# (Forum with Examples)
I hope this helps.
Regards,
Mike Watts
Product Marketing - Modular Instruments

Error when updating Client Access Front End Service to Exchange 2013 Update 6

Similar Messages

Maybe you are looking for