Error while adding a second template to the same data definition

Hi,
I am quite new to XML Publisher. I am developing a report using XML Publisher.
I have added one template to the Data Definition. When I tried to add another Template(with different name as previous, to the same concurrent program and application) to the same Data Definition I am getting the following error.
Error: You entered a duplicate template entry. Please change the Name, Code and/or Application and reapply.
Can anyone help me out solving this problem. I am reaching my deadline. Please suggest me what can be done.
Regards,
Sita

Hi
Try to change the Template code name also and then check it.
Thanks
Sudheer

Similar Messages

  • Error while adding a used relationship between the New DC and the Web DC

    Hi Gurus
    We are getting the Error in NWDS while Adding  a used relationship between the New DC and the Web DC.
    Steps what we are Done
    1. Create the custom project from inactiveDC's
    2.creating the project for the component crm/b2b in SHRAPP_1
    3.After that we changed the application.xml and given the contect path.
    4.Then we tried to add Dependency to the custom create DC we are getting the error saying that illegal deppendency : the compartment sap.com_CUSTCRMPRJ_1 of DC sap.com/home/b2b_xyz(sap.com.CUSTCRMPRJ_1) must explicitly use compartment sap.com_SAP-SHRWEB_1 of DC sap.com/crm/isa/ like that it was throwing the error.
    so, we skip this step and tried to create the build then it is saying that build is failed..
    Please help us in this regard.
    Awaiting for ur quick response...
    Regards
    Satish

    Hi
    Please Ignore my above message.
    Thanks for ur Response.
    After ur valuble inputs we have added the required dependencies and sucessfully created the projects, then building of the  projects was also sucessfully done and  EAR file was created.
    We need to deploy this EAR file in CRM Application Server by using the interface NWDI.
    For Deploying the EAR into NWDI, we need to check-in the activites what i have created for EAR. once i check-in the activites ,the NWDI will deploy the EAR into CRM Application Server.
    In the Activity Log we are able to check the Activities as Suceeded but the Deployment column is not showing any status.
    When i  right click on my activity Id the deployment summery is also disabled.
    So finally my Question is that where can i get the deployment log file, and where can i check the deployment status for my application..
    Any pointers in this regard would be of great help..
    Awaiting for ur valuble Responses..
    Regards
    Satish

  • Error while adding a new field to the Segment in we31

    Hi ,
    I am getting error when i am trying to add the new field to the cust. segment.
    It is released for the adding the new fields i am cancelling the release , but i got a message like this
    Error while resetting release of segment 'segment name'.
    it is comming from the message class EA and message number 259.
    Thanks in advance.
    Reagrds,
    bharani

    Hi,
    Have you tried Cancelling the release before adding the version?
    Select the active version of the IDOC Segment and cancel its release first. Only then you will be able to add a version.
    Please let me know if it worked!
    Vijay

  • Error while adding oracle database resource to the fail safe group

    Hi,
    we are installaing ERP 6.0 EHP4 , oracle10.2.04  in MSCS
    During the step, Adding the oracle Database Resource to the fail safe
    group , I am getting the error.
    28  13:21:57    ** WARNING : FS-10288: Parameter file C:\oracle\BCP\102\database\init<SID>_OFS.ora is not located on a cluster disk
    29  13:21:57    ** WARNING : FS-10404: The database uses a nonclustered disk in one of the system parameters.  Value of parameter is C:\ORACLE\<SID>\102\RDBMS\AUDIT
    30  13:21:58    ** ERROR : FS-10036: The resource uses disk SAP HDD, which is also used by cluster resource SAP VIP in another group
    31  13:21:58    ** ERROR : FS-10778: The Oracle Database resource provider failed to configure the cluster resource <SID>.WORLD
    32  13:21:58    ** ERROR : FS-10890: Oracle Services for MSCS failed during the add operation
    33  13:21:58    ** ERROR : FS-10497: Starting clusterwide rollback of the operation
    34  13:21:58  FS-10488:<primary node name> : Starting rollback of operation
    35  13:21:58   > FS-10090: Rolling back Oracle Net changes on node <primary node name>
    I am having one local disk C: one shared disk Z: and quorum disk Q:
    Shared disk Z: is already used for SAP<sid> group.
    Regards,
    Joel

    Joeldhanaraj wrote:>
    > Hi,
    >
    > we are installaing ERP 6.0 EHP4 , oracle10.2.04  in MSCS
    >
    > During the step, Adding the oracle Database Resource to the fail safe
    > group , I am getting the error.
    >
    > 28  13:21:57    ** WARNING : FS-10288: Parameter file C:\oracle\BCP\102\database\init<SID>_OFS.ora is not located on a cluster disk
    > 29  13:21:57    ** WARNING : FS-10404: The database uses a nonclustered disk in one of the system parameters.  Value of parameter is C:\ORACLE\<SID>\102\RDBMS\AUDIT
    > 30  13:21:58    ** ERROR : FS-10036: The resource uses disk SAP HDD, which is also used by cluster resource SAP VIP in another group
    > 31  13:21:58    ** ERROR : FS-10778: The Oracle Database resource provider failed to configure the cluster resource <SID>.WORLD
    > 32  13:21:58    ** ERROR : FS-10890: Oracle Services for MSCS failed during the add operation
    > 33  13:21:58    ** ERROR : FS-10497: Starting clusterwide rollback of the operation
    > 34  13:21:58  FS-10488:<primary node name> : Starting rollback of operation
    > 35  13:21:58   > FS-10090: Rolling back Oracle Net changes on node <primary node name>
    >
    > I am having one local disk C: one shared disk Z: and quorum disk Q:
    >
    > Shared disk Z: is already used for SAP<sid> group.
    Hi Joel,
    how about following the advice given by the error message and moving the mentioned files/folder (init<sid>_OFS.ora, AUDIT folder) to a clustered resource disk?
    just my 2 pence...

  • Adding a second printer of the same model

    I am currently printing successfully to two printers on my AEBS, an Epson C86 and an Epson CX7400. I am attempting to add another Epson CX7400. The Print/Fax panel allows me to add the third printer and the Airport Utility recognizes it. However, when I print to the third printer it never prints. Yet if you look to the completed jobs for that printer, the job shows as having been printed.
    I've restarted the computer and printer after adding it to the print/Fax panel in the hopes that that might help but with change. I've changed the name of the second CX7400 thinking the process might need to differentiate printers by their names. That didn't help either.
    All the while, both the original CX7400 and C86 still faithfully print. Is it just that two of the same model printers can't be networked together?

    It looks like the AEBS keeps track of the printers via the model number supplied as part of the USB Plug and Play standard.
    I guess the Apple engineers never figured someone would want two if the same printer on the same base station, (or else they figured that noone would need more than 2 printers per AEBS.)
    You may have to get a stand-alone print server for the new printer.

  • I can't get my ICloud started. Each time i try to sign in..it indicates that theres a problem with my email apple address but never indicates what. I added a second email but the same result. Have changed my password numerous times...no result?????

    I have followed the instruction relating to Icloud connection.When i went to system preferences, my Apple address is continually rejected. I have added a second email as suggusted by an Apple site but i still get the same message. Im not told why the Apple ID/email is not accepted when it is accepted in all other Apple sites. I changed my password numerous times to ensure it wasnt the password but to no result. It continued to state that my Apple ID was the problem. I live in Malta,Europe. Have new Apple Mac Pro and Ipod. The annoying thing is that ICloud continually send me the problem notice but do nothing to tell me how to fix it? Can i switch this notice off? Help???????

    Welcome to the Apple community Yao.
    If you mean that Find My Phone is asking for a password to a different Apple ID to your current Apple ID.
    This feature has been introduced to make stolen phones useless to those that have stolen them.
    However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7, or if you restore from a previous back up made before you changed your details.
    The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID using your current password, you don’t need access to this address if it’s previously been used with your Apple ID, once you have saved these details enter the password as requested on your device and then turn off "find my phone" and delete the account from your device.
    You should then change your Apple ID back to its current state, save it once again and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
    This article provides more information about Activation Lock.

  • Error while Configuring Repository INS0017: Installation of the seeded data

    I am getting error while configuring repository at 36%
    Error:
    Seeding Failed:
    The warehouse builder workspace owner installation failed on user OWBSYS.
    INS0017:Installation of the seeded data failed java.io.FileNotFoundException:
    xmlClasses.xml (Access is denied)
    Operating system: Windows 2008 server 64 bit
    Database: Oracle 11g Release 11.2.0.1.0 64 bit
    Log file is not created in given location(Unified repos)

    Hi David,
    But we have successfully Created the Repository(Using Repository Assistance) using OWB 10.2.0.4 on Oracle 11.1.0.7 Db on Solaris OS.
    and i also checked the Metalink it say the OWB 10.2.0.4 can be used with Oracle 11.1.0.7 Db.
    Nawneet

  • VBA Merge PDFs - Error when first and second PDF are the same

    Using http://khkonsulting.com/2009/03/adobe-acrobat-and-vba-an-introduction/ as a guide, I am able to successfully merge multiple pdf's together into one document using VBA (Access mdb), except when the PDF being merged to has the same name as the next PDF.
    Here's my scenario.  An Access table is updated with a list of reports that need to be printed.  All of these reports are PDF's.  I loop thru this table and merge the PDF's according to an identifier, then print the group.  There are times
    when there are multiple copies of the same report for an identifier.  If the PDF being merged to has the same name of the PDF being merged, an error occurs.  How can I handle this situation?
    Sample data:  This identifier (ESO and Pulling) needs to merge these PDF's (Aaa.PDF) together which happen to have the same name.  Aaa.PDF is trying to merge Aaa.PDF and this throws an error.
    Aaa.PDF ESO  Pulling
    Aaa.PDF ESO  Pulling
    This identifier merges fine despite having the same PDF twice.  But the first PDF is not named the same.  Xxx.PDF is the first PDF and merges the next two into it.  The last two
    are named the same.
    Xxx.PDF  916  Pulling
    Bbb.PDF  916  Pulling
    Bbb.PDF  916  Pulling
    Code:
    pdfDoc1.Open (filesToMerge(1))
    numPages = pdfDoc1.GetNumPages()
    Set pdfDoc2 = CreateObject("AcroExch.PDDoc")
    Dim i As Integer
    For i = 2 To intNbr - 1
    pdfDoc2.Open (filesToMerge(i))
    If pdfDoc1.InsertPages(numPages - 1, pdfDoc2, 0, pdfDoc2.GetNumPages(), True) = False Then
    MsgBox "Cannot insert pages"
    End If
    pdfDoc2.Close
    Next i
    If pdfDoc1.Save(PDSaveFull, "C:\....\ReportPacket__" & Trim(CStr(intReportCount)) & "__" & ... & ".pdf") = False Then
    MsgBox "Cannot save the modified document"
    End If
    pdfDoc1.Close
    The pdfDoc1.InsertPages command fails, displays "Cannot insert pages", then displays "Method 'Close' of object 'CAccroPDDoc' failed.
    Thanks for any help or advice.

    Hi
    As far as I know, Access didn't provide such method. But I think you are able to achieve this goal through some 3rd party PDF component
    Hope this will help you.
    Best Regards
    Lan
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Advice on adding a second iPod to the same PC

    Hi
    I've had my iPod for years, and never had any problems! I've always had my iPod set up on this PC along with my library etc.
    I've recently moved in with the girlfriend who used to have her library for her iPod nano on her parents PC. Obviously she cannot go back to her parents everytime just to sync it! If we try plug it into my PC, it throws a hissy fit, saying it's not the iPod that belongs to this computer. Is it mainly because she has songs that I don't have in my library? Should she remove all the tracks from it and try again?
    Do we have to have the same music on both iPods if they are both sharing the same library?
    Just some advice on the best ways to keep us both happy would be ace.
    Thanks all
    Gary

    A single iTunes library can feed many iPods, and each iPod can get it's own tailored load of tracks and playlists to boot. But without using non-Apple tools or methods, you can't get the current tracks on the nano to load into your library. iTunes only supports wiping it clean and loading with selections from your library.

  • Error while adding a new method to the Session Bean

    Hello everyone. I'm using jdev 11g, ejb, jpa & jsf. Everything works fine. But when I try to add a custom method to the Session Bean, I'm having an error.
    Here is my steps:
    1) I added a new method to SessionBean.java. Something like this:
    public void Hello() {
    System.out.println("Hello!");
    2) Then using Structure palette I exposed this method through Local interface and created data control
    3) Finally, I made a command button binded to this method (just droped it from DataControls.dcx to my page)
    When I start the page and click the button, I'm having the following error:
    Error 500--Internal Server Error
    javax.faces.el.EvaluationException: Method not found: Hello.execute(javax.faces.event.ActionEvent)
         at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:58)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1227)
         at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183)
         at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:70)
    ... (I've truncated the log because there is nothing important in the missing part)

    Yes, I have binding in the page def. Everything is correct there:
    <methodAction id="Hello" RequiresUpdateModel="true" Action="invokeMethod"
    MethodName="Hello" IsViewObjectMethod="false"
    DataControl="PriceServiceLocal"
    InstanceName="PriceServiceLocal.dataProvider"/>
    I've droped the method from the Data Controls panel

  • Error while adding content type fields in the EditForm.aspx for an customlist item.

    This is office 365. I have content type which is attached to custom list.
    Added new site column "CustomerAction" which was added to Content type, now when I added this field in the EDITForm.aspx using the SharePoint designer, this form is called when the custom list item is being edited.
    But when I added this extra field to EDITFORM.aspx it is giving error,. the standard correlationid error.
    Can anyone suggest, what could be problem !
    Thanks
    Labhesh
    Labhesh Shrimali

    Hi Labhesh,
    When we add the site column to the content type, there is an option to update the all
    content types which inheriting from this type.
    If we set this to Yes, then the site column will be added to the list where the content type or its child content type has been used and this column will be added to the EDITFORM.aspx too.
    So we don’t need to re-add this site column to EDITFORM.aspx.
    Thanks,
    Victoria
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Victoria Xia
    TechNet Community Support

  • The external credentials in the SSO database are more recent --- Receiving this error while adding entries to SSO database.

    We are getting this error while adding entries to SSO database. Its working in other environments and failing in only environment. Please advice.
    error MSB4018: The "BizTalk.BuildGenerator.Tasks.SSO.PopulateApplicationProperty" task fa
    iled unexpectedly.\r
    : error MSB4018: System.Runtime.InteropServices.COMException (0xC0002A40): The external cre
    dentials in the SSO database are more recent.\r
     error MSB4018: \r
     error MSB4018:    at Microsoft.BizTalk.SSOClient.Interop.ISSOConfigStore.SetConfigInfo(St
    ring applicationName, String identifier, IPropertyBag properties)\r
     error MSB4
    018:    at BizTalk.BuildGenerator.Tasks.SSO.SSOConfiguration.Write(String appNa
    me, String propName, String propValue)\r
     error MSB4018:    at BizTalk.BuildGenerator.Tasks.SSO.PopulateApplicationProperty.Execute
    ()\r
     error MSB4018:    at Microsoft.Build.BackEnd.TaskExecutionHost.Microsoft.Build.BackEnd.IT
    askExecutionHost.Execute()\r
     error MSB4018:    at Microsoft.Build.BackEnd.TaskBuilder.ExecuteInstantiatedTask(ITaskExe
    cutionHost taskExecutionHost, TaskLoggingContext taskLoggingContext, TaskHost t
    askHost, ItemBucket bucket, TaskExecutionMode howToExecuteTask, Boolean& taskRe
    sult)
    Thanks, Pavan MCTS-Microsoft Biztalk Windows Server 2010

    Hi,
    This error generally arises when your system datetime is not in sync with the Domain Controller datetime. Try following steps:
    1. Check if the Windows Time Service is running on your machine or not. Try restarting this service and then restart host instances. Then run your script.
    2. If this does not works, have a look at this
    link
    Hope this will help.
    HTH,
    Sumit
    Sumit Verma - MCTS BizTalk 2006/2010 - Please indicate "Mark as Answer" or "Mark as Helpful" if this post has answered the question

  • Getting an error while adding the user in Sharepoint foundation 2010 environment.

    Hi,
    I am having full control access to SharePoint site. Then i tried add user for that site.
    But i am getting following error while adding the user to the site.
    An unexpected error has occurred.
    Troubleshoot issues with microsoft SharePoint Foundation.
    Correlation ID:3035B777-1B7C-4463-B35E-06657B72C2E4
    Can you please help me anyone on this.
    Thanks,
    Ashok

    This could be any one of a number of things.  You need to lookup the Correlation ID in the ULS logs on the SharePoint server.  That should provide the additional information necessary to diagnose and solve the problem.  Here's a blog post
    on how to find the error.
    http://habaneroconsulting.com/Blog/Posts/Get_the_Real_SharePoint_Error_using_the_ULS_Logs.aspx#.UvEuffldWik 
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

  • HELP --- Error while adding Portlets to the Page. (WWC-44012)

    Hi all,
    I have a pl/sql portlet. It compiles fine and shows up perfectly in portlet repository. But when i add this to the page, I get following error
    Error while adding Portlets to the Page. (WWC-44012)
    An unexpected error occurred: User-Defined Exception (WWC-43000)
    An unexpected error occurred: User-Defined Exception (WWC-43000)
    An unexpected error occurred: User-Defined Exception (WWC-51004)
    (WWC-00000)
    I checked the portlet specification file (.pks) and body file (.pkb) for any mistakes but they seems fine.
    Does anyone know what can cause this error?
    Any pointers in this regards will be highly appreciated.
    Thanks!!!
    Rajesh

    Rajesh,
    Could you provide some more details about your code? I will try to look into possible causes of the error. One thing you may try is subscribing to the Knowledge Exchange on http://portalcenter.oracle.com. Then you could post your code in your community folder and everyone would be able to test it out.
    Of course, this means you must be willing to share your code with everyone.
    James

  • Time Machine error message while restoring..."an error occurred while adding a recovery system to the destination disk

    I had to change my hard drive in my MBP 15".  I use Time Machine on a Time Capsule for backup.  I am booting up my laptop with a bootable USB key.  I have partitioned my new hard drive (bigger than the old one) and named it Macintosh HD (same as the old one).  I select the option to restore from Time Machine Backup.  I select one of my latest backup....select my destination drive...the restore process starts but stop within minutes with the following message.  "An error occurred while adding a recovery system to the destination disk"  It then prompts me to restart....
    I need your help...what can it be.
    Thanks

    I've encountered this issue when the Time Machine was encrypted with FileVault.
    Article:  HT4718
    Additional Information
    Please note that OS X Recovery must be present on the computer's startup volume in order to use FileVault 2. Using RAID partitions or a non-standard Boot Camp partition on the startup disk may prevent OS X from installing a local Recovery system. See "OS X: Some features of Mac OS X are not supported for the disk (volume name)" for more information.
    What seems to work, is reinstalling the OSX from the internet, and then using migration assistant to pull the user from the time machine backup external when logged into a temporary administrator user to move the original user back over.
    Perhaps if you're stubborn, what would work is the following from the same article:
    What to do if the installer warns that no Recovery System can be created
    Some disk partition configurations may result in the OS X installer reporting that it could not create a Recovery System. In these situations, even if you are permitted to continue the install, you may want to quit the installation and create an external, bootable OS X hard drive with a Recovery System, first. You can continue your OS X upgrade on your computer's startup drive after creating an external Recovery System.
    Your storage device must have at least 13 GB available (after formatting) to install OS X Lion or later and a Recovery partition.
    These steps erase and reformat the storage device. This article instructs you on setting up a storage device to use the GUID partition scheme and the Mac OS Extended (Journaled) format, which are required to install OS X and a Recovery partition on your external storage device. You should back up any important files that are on the device to a different drive.
    This procedure installs a version of OS X that is compatible with the Mac it was created with. Using this OS X system with a different Mac model may produce unpredictable results.
    Your computer's serial number is sent to Apple as part of this process to help authenticate your request to download and install OS X Lion.
    All of this information was collected by browsing through the public articles on the Apple Support website.

Maybe you are looking for