This doesn't fit, but I have questions New MACBOOK pro 15 inch
I am going to get the new Macbook Pro 15inch. I want the 2.8Ghz and I will build up the RAM later. Anyway, for the money should I go the 3.0 GHz? I am a video editor that works on SD and HD, usually never over 720p. I also do a little work in AE, I make my titles and some low level graphics. Will there be a big difference for me in 2.2Ghz of chip power, or can will I be fine for a while with the 2.8.
I know the MAC isn't out yet, but I am trying to save some money. It beats the old price of the mac daddy 15 inch that was topping out at 2300 bucks.
Cheers.
The 2.8Ghz should work fine. I don't think you would notice that much difference going to the 3.0Ghz. Get a large/fast HD though for video. I just put a 500GB 7200RPM in my aluminum MBP. The 250GB 7200RPM stock drive outgrew me fast.
Dave M.
MacOSG Founder/Ambassador An Apple User Group iTunes: MacOSG Podcast
Creator of 'Mac611 - Mobile Mac Support' (designed exclusively for an iPhone/iPod touch)
Similar Messages
-
Hello, this might be a basic question, but how do you open QuickTime to record a new webinar? I have a new MacBook Pro with Yosemite and can only get QuickTime to appear in Finder but not actually open to allow me to record something new. Thx.
Hi Winterwilly,
Welcome to Apple Support Communities.
The article linked below answers your question of how to use QuickTime to record something on your MacBook Pro’s screen.
QuickTime Player 10.x: Record your computer’s screen
Cheers,
-Jason -
I have a new Macbook Pro but it does not have iDVD. How can I get this application?
I have a new Macbook Pro but it does not have iDVD. How can I get this application?
I have a new Macbook Pro but it does not have iDVD. How can I get this application?
If you are still within your 15 day return period. Call Apple they will sent out iDVD at no charge. (There are no realistic substitutes.)
Nicely explain that you may return the computer without iDVD. That usually does the trick. You MUST speak to a senior advisor to get a free copy. The first tier people cannot do it.
408-996-1010
800-692-7753
If that doesn't work you can purchase iLife 11 (includes iDVD) on disk.
IDVD is a wonderful piece of software and well worth the low cost of $40.
http://www.amazon.com/Apple-MC623Z-A-iLife-VERSION/dp/B003XKRZES/ref=sr_1_1?ie=U
http://dealmac.com/lw/artclick.html?1,527850,1872219 -
I know many have this issue but i can't find a solution to the problem. i get message saying insuffisiant disk space in the volume iPhoto library and i have plenty of space available. i have the new macbook pro with retina display. i have never seen this message before and i have 2 other macbooks and have had many other also. i am assuming this is a problem with the new macbook retina. does anyone know the exact fix to this issue? i have seen many sugestions to try to fix this issue but none have solved the issue for anyone that i can find in the Apple Support Community. thank for looking into this in advance.
******A true apple fan********Actually your suggestions are the ones that i have tried. i have seen that you have tried to help others with this issue and the only one that i could find that said they found the problem said that it was an ilife update issue and it fixed it and i have no available updates. i know it has to do with something in photo stream because it happens when i create a new library and it is loading the photos but i get the message before i reach the maximum 1000 photos. so i've tried updating, new library(first backing up photos and then deleting them from iPhoto), reinstalling OSX many times, running disc utilities. I called Apple the first day i had this issue and i was the first person to call them for support with the retina display and i actually had it escalated to a senior advisor and we thought we fixed the problem but we did not. i am pretty fluent in dealing with troubleshooting these type of issues and this is the first time i'm reaching out to the community. i figured now that the retina has been out some time now that there would be an obvious answer to this issue. thanks for the quick reply.
Bebers5 -
I have a new MacBook Pro with OS10.8.2 and cannot get Contacts to print a list of addresses with pictures showing. There is a check box selecting "picture" which has been checked - but no picture. This worked fine on OS10.7.5. Problem??
First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long. -
I have a new MacBook Pro. I am using firefox version 7.0.1, but my homepage is set to google. Firefox constantly keeps opening new tabs to its own homepage by itself. How can I disable this feature.
Hi [email protected]
If you have set Google to be your homepage, that should be the first one to appear. Are you seeing the Firefox home page when you open new tabs? New tabs should be blank by default. The only reason I've seen Firefox open new tabs with Firefox data on it is after an upgrade of the product. -
Have CS 5 Installed on my iMac and works ok. But installed on my new MacBook Pro it won't open NEF files from my Nikon D810. Displays NEF icons, but when I try and open them the response is: Make sure latest RAW updates are installed. If problem persists follow link: http://www.adobe.com/go/kb407111. Have installed Bridge 5.0.2.4; Raw Ref Version 7.0.0.308; DNG converter_8_7_1.dmg; Bridge 5.0.2 Update 2. Also same problem with Lightroom which I don't normally use. Lightroom_3_LS11_mac_3_6.dmg installed.
In the link you posted it states that the Nikon 810 requires ACR 8.6 or newer.
Version of ACR are specific to versions of Photoshop. You cannot use 8.6 nor even 7.0.in CS5.
I believe that ACR 6.7 is the latest that will work with CS5, so make sure you have this installed and get rid of ACR 7.
Having 2 versions of ACR will cause problems.
You have already downloaded DNG Converter 8.7.1.
Have you double clicked the DMG file to allow you to install DNG Converter on your computer?
Be aware that DNG converter is a stand-along application and not a plug-in.
You need to open DNG converter at select the FOLDER that contain your .NEF files.
Don't open the folder and try to select individual files, it doesn't work that way.
After converting your D810 files to DNGs you can then open the DNGs in CS5
The problem is your camera didn't exist when CS5 & its version of ACR was developed.
i don't use Lightroom, but the list mentions Lightroom 5.6 as needed to open D819 so your 3.6 version of LR won't cut it. -
I have a new macbook pro and want to transfer my Mail autofill from my old mac. Never used Time Machine or Migration Assistant -- looks complicated. Any easy way to do this?
caitlinfromcambridge wrote:
Thanks -- I would like to try this. I do not know how to reach hard drive from old mac to new. Can you help me with this?
There are two ways - you can boot your old Mac in Target Mode (reboot your Mac, and as soon as you hear the startup chime hold down the T key on the keyboard until you see the yellow/orange Firewire logo on screen). You can then use a FireWire cable to connect your new mac to your old one. The old Mac hard drive will appear on your new Mac as if it is an external hard drive.
Details on Target Disk Mode: http://support.apple.com/kb/ht1661
If you don't have a firewire cable but you do have a home network (i.e. both computers can access the Internet at the same time), you can share the hard drive on your old Mac and then connect to it on your new Mac.
Good article on sharing your hard drive: http://support.apple.com/kb/HT1549
Finally, if the above doesn't thrill you, you can hook an external drive to your old Mac, copy the mail folder over to it, then connect the external drive to your new Mac and copy it over. It's two steps, but if you don't have a firewire cable and aren't comfortable with sharing over a network it will work just as well - you just have to wait for the mail folder to copy twice instead of once.
If you get stuck post back! -
I have a new macbook pro and just made a video on imovie and it asked me to put it on idvd but there is no idvd listed as an option. How can i get idvd. it doesn't seem available
Since Apple has stopped supporting and offering iDVD you'll need to purchase the iLIfe 11 disk from a 3rd party retailer like Amazon.com: iLife 11 which will include iDVD 7.
OT -
I have a new Macbook Pro hooked up to a new Belkin wireless router. I can connect to the internet without a problem. I have an HP officejet printer hooked up the the router to work wirelessley, The router is reading it as connected. My computer reads it as offline. If I reset my computer it will print whatever the first thing is in the que but nothing else and does not work after that. Is there some sort of setting that I am missing? I am trying to set this printer up to work wirelessly from three mac laptops in my house but I can't even get it to work on one right now. Any help would be awesome
Mac OS X 10.7 Help: Troubleshoot a network printer
-
I have a new macbook pro running lion and want to update to ios 5 on my ipod touch. My old macbook only has 10.4.11 and can't be updated to lion - and won't update my ipod touch to ios 5. But the message on my new macbook pro says I have to update on the computer I normally use for syncing or my music will be lost. Is there any solution for this?
try exporting your iTunes libary from the old computer to the new one
take a look at this from apple
http://support.apple.com/kb/HT4527
I am not sure you have home shareing with 10.4.11 but if you do it works very nicely
Mike -
I have a new Macbook Pro and an old Canon ip Pixma 8500. I have downloaded the software from Canon but my printer settings will still not register it. Looks like I can print a colour calendar but not a letter!
Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps. -
I have a new Macbook Pro. Trying to migrate files etc from my Macbook Air using a Thunderbolt Cable between them.
I follow the directions but the two computers never "discover" each other - using a WiFi connection works but 70 hours is a rough deal.
(Mac OS 10.8.2 on both computers)Are you trying target disk mode?
http://support.apple.com/kb/PH10725
Ciao -
hello everyone! i have a new macbook pro and i want to download aperture. my app store says it is already installed (on my old macbook pro). how do i install aperture from the app store in this instance please?
Are yoy sure that Apeture is not in the Applications folder of the new system? If it is move it to the trash and the App Store will let you download Aperture from it.
You will need to make sure you use the same Apple ID you used to purchase it in the past.
regards -
I have a new MacBook Pro with OS X Lion 10.7.4. The DVD player does not have a feature to store film clips. Why? This is useful for my work and I had it on my older computer? Why the loss of capacity?
I cannot recall the DVD player ever being a place to "store" videos - it is simply an app to play videos.
If your machine is new, then iMovie should be included as the "shrunk" version of iLife is included with Lion (iMovie, Garageband, and iPhoto). However, iMovie is not a place to store videos either - it is a video editor. You import your clips and edit them in order to then burn to a DVD or share via a social media site.
Have you considered simply dragging the clips to your folder "Movies"? That would be a great place to just store them (please be aware that videos are usually large files, so keep your hard drive space in mind so you keep a minimum free and available for the OS to operate properly):
Maybe you are looking for
-
I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust m
-
Update the database table inside an user exit.
Hi Experts, I have a issue where i have to update a custom table in an User exit. I am using Lock object for ENQUE/DEQUE. I have tried to use statements like UPDATE/MODIFY inside the user exit. But the problem is that it's not updating the database t
-
CFBuilder 3 loses second server settings on cfbuilder exit/restart
I have two servers which I have connected to the cfbuilder. First one is localhost, which works okay, even debugger. Second is vmware XP image, which i can connect to the builder via new add server setup window. settings: Name:Vmware XP type: Other h
-
Analog line (FXO) Incoming calls getting connected after 3 rings
HI, we are having 4 Analog line (FXO)...Every time when callers call the number they hear 3 rings & after that call frwds to AA or any extension. In show voice port summary, we can see that voice port is getting connect at the first ring but aft
-
Error message when listing activities with Oracle BPEL Control and Java API
I'm implementing some BPEL processes in an Oracle Application server 10.1.3.3 environment. I use the Oracle BPEL Process Manager Client Java API to access some BPEL instances but when I want to list their activities with IInstanceHandle.listActivitie