Error while calling a adobe form?

Hi All,
in my webdynpro component , i am calling adobe form.but i am getting error as mentioned below.
Error when processing your request .......
Webdynpro Exception:The ADS call has failed.you can find information about the
cause in the error.pdf on the application server.
why this error coming? even when i execute a standard application also i am getting this.why?
Regards,
lakshmi.

Abhi
I too got the same error:
WebDynpro Exception: The ADS call has failed. You can find information about the cause in the error.
I refered the link provided by you for testing the ADS configuration and it displayed a 2 page report.
Is that mean that there is a problem in my form?
Regards
Vijai

Similar Messages

Access denied Error while calling Web Service form Infopath Form 2010.

Hi Dear All,
I have been facing an error while calling an GetUserProfileByName() web service method from InfoPath 2010 from.
i have FBA(Forms Base Authentication )configured . After Infopath form published to site collection when i select an user from people picker control i want to get Email Id of Selected user for that i am calling getUserProfileByName() Web Method, but
i am getting Access denied error code 500.
Any Help would be more than welcome.
Thanks.

Hi,
Greetings. Please check
Check the IE settings. Click Internet Options> Security>Custom level. Make sure that the ‘Access data source across domains’ is enabled. Make sure that you have permission to the web service and to the content which the web service tries to modify.
For more information, please refer to this site:
"Access is denied." error in Infopath 2007 form + ASMX: http://us.generation-nt.com/answer/access-denied-error-infopath-2007-form-plus-asmx-help-65808252.html
Please remember to click 'Mark as Answer' on the answer if it helps you

Error while opening the ADOBE FORM via mail

Hi to all,
I have created a program to attached ADOBE FORM to mail.
When I execute the program, it sends ADOBE FORM to my mail ID successfully.
But when I open my mail and try to open attached ADOBE FORM, it gives error
ADOBE READER COULD NOT OPEN u2018PDF FORM (1). PDFu2019 because it is either not a supported file type or because the file has been damaged ( for example, it was sent as an email attached and wasnu2019t correctly decoded).
Please can any tell me, what the problem is and what the solution is for that?
I shall be thankful to you for this.
Regards
Pavneet Rana
Edited by: pavneet rana on Aug 1, 2011 2:22 PM

Thanks for reply,
below is the code.
data:
l_fm_name         TYPE rs38l_fnam,
   l_formname   TYPE fpname VALUE 'ZTESTF1' ,
fp_docparams      TYPE sfpdocparams,
FP_FORMOUTPUT     TYPE FPFORMOUTPUT,
fp_outputparams   TYPE sfpoutputparams.
data: I_ATT_CONTENT_HEX type SOLIX_TAB.
START-OF-SELECTION.
data: st TYPE ZTABFM11.
data: it type table of sflight.
data: wa like LINE OF it.
data: wa_st like LINE OF ST.
fp_docparams-langu   =      'E'.
fp_docparams-country =      'US'.
fp_docparams-fillable =      'X'.
fp_outputparams-nodialog = 'X'.
fp_outputparams-preview =   'X'.
fp_outputparams-device   = 'LP01'.
fp_outputparams-getpdf =   'X' .
fp_outputparams-dest   =    'LP01'.
fp_outputparams-reqimm =   'X'.
fp_outputparams-reqdel =   'X' .
fp_outputparams-xfpoutdev = 'LP01'.
CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
    EXPORTING
      i_name     = l_formname
    IMPORTING
      e_funcname = l_fm_name.
E_INTERFACE_TYPE           =
CALL FUNCTION 'FP_JOB_OPEN'
    CHANGING
      ie_outputparams = fp_outputparams
    EXCEPTIONS
      cancel          = 1
      usage_error     = 2
      system_error    = 3
      internal_error = 4
      OTHERS          = 5.
select * from sflight into TABLE it.
loop at it into wa.
    wa_st-CARRID = wa-CARRID.
    wa_st-CONNID = wa-CONNID.
    wa_st-FLDATE = wa-FLDATE .
    wa_st-PLANETYPE   = wa-PLANETYPE.
    append wa_st to st.
    endloop.
CALL FUNCTION l_fm_name
    EXPORTING
      /1bcdwb/docparams = fp_docparams
          st               = st
    IMPORTING
      /1BCDWB/FORMOUTPUT = FP_FORMOUTPUT
    EXCEPTIONS
      usage_error        = 1
      system_error       = 2
      internal_error     = 3
      OTHERS             = 4
   CALL FUNCTION 'FP_JOB_CLOSE'
IMPORTING
    E_RESULT             = result
   EXCEPTIONS
     usage_error          = 1
     system_error         = 2
     internal_error       = 3
     OTHERS               = 4
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
    EXPORTING
      BUFFER                = FP_FORMOUTPUT-PDF
APPEND_TO_TABLE       = ' '
IMPORTING
OUTPUT_LENGTH         =
    TABLES
      BINARY_TAB            = I_ATT_CONTENT_HEX .
CLASS cl_bcs DEFINITION LOAD.
DATA:
lo_send_request TYPE REF TO cl_bcs VALUE IS INITIAL.
lo_send_request = cl_bcs=>create_persistent( ).
Message body and subject
DATA:
lt_message_body TYPE bcsy_text VALUE IS INITIAL,
lo_document TYPE REF TO cl_document_bcs VALUE IS INITIAL.
APPEND 'Dear,' TO lt_message_body.
append ' ' to lt_message_body.
APPEND 'Fill the details.'
TO lt_message_body.
append ' ' to lt_message_body.
APPEND 'Thank You,' TO lt_message_body.
lo_document = cl_document_bcs=>create_document(
i_type = 'RAW'
i_text = lt_message_body
i_subject = 'flight details' ).
DATA: lx_document_bcs TYPE REF TO cx_document_bcs VALUE IS INITIAL.
TRY.
      lo_document->add_attachment(
      EXPORTING
      i_attachment_type = 'PDF'
      i_attachment_subject = 'flight details'
I_ATTACHMENT_SIZE =
I_ATTACHMENT_LANGUAGE = SPACE
I_ATT_CONTENT_TEXT =
I_ATTACHMENT_HEADER =
      I_ATT_CONTENT_HEX = I_ATT_CONTENT_HEX ).
    CATCH cx_document_bcs INTO lx_document_bcs.
ENDTRY.
Add attachment
Pass the document to send request
lo_send_request->set_document( lo_document ).
Create sender
DATA:
lo_sender TYPE REF TO if_sender_bcs VALUE IS INITIAL,
l_send type ADR6-SMTP_ADDR value 'mail id '.
lo_sender = cl_cam_address_bcs=>create_internet_address( l_send ).
lo_sender = cl_sapuser_bcs=>create( sy-uname ).
Set sender
lo_send_request->set_sender(
EXPORTING
i_sender = lo_sender ).
Create recipient
DATA:
lo_recipient TYPE REF TO if_recipient_bcs VALUE IS INITIAL.
lo_recipient = cl_sapuser_bcs=>create( sy-uname ).
lo_recipient = cl_cam_address_bcs=>create_internet_address( l_send ).
Set recipient
lo_send_request->add_recipient(
EXPORTING
i_recipient = lo_recipient
i_express = 'X' ).
lo_send_request->add_recipient(
EXPORTING
i_recipient = lo_recipient
i_express = 'X' ).
Send email
DATA: lv_sent_to_all(1) TYPE c VALUE IS INITIAL.
lo_send_request->send(
EXPORTING
i_with_error_screen = 'X'
RECEIVING
result = lv_sent_to_all ).
COMMIT WORK.
message 'Form sucessfuly send to person' type 'I'.
plesase can any one, provide the soultion.
i shall be thankful toy you for this.
regards
pavneet rana

Error while Uploading Interactive Adobe Form

Hi,
I have been given a template Interactive Adobe form by Adobe which i have to upload in SAP. I created a test interface and form then i am trying to import the template into the layout. I get following error -
" Can not Load: "http://dldtc00.wdf.sap.corp:5800/sap/bc/soap/wsdl11?services=test&sap-client120&sap-user=ag&sap-password=d01&. Check that path is correct and that the file is a valid WSDL file."
Could you please tell me why am i getting this error and how to fix it?
Thanks,
Amit

Abhi
I too got the same error:
WebDynpro Exception: The ADS call has failed. You can find information about the cause in the error.
I refered the link provided by you for testing the ADS configuration and it displayed a 2 page report.
Is that mean that there is a problem in my form?
Regards
Vijai

Getting error while calling reports through form

Hi I want to call a report from a form i put the following code on when-button-pressed but i am getting the following error.I can generate and run the reports.The object REPORTS is created under forms report object
FRM-41211: Integration error: SSL Failure running another report
DECLARE
repid REPORT_OBJECT;
report_prop VARCHAR2(20);
v_rep VARCHAR2(100);
BEGIN
repid := find_report_object('REPORTS');
set_report_object_property(repid,report_other,'p1=15 p2=19 paramform=yes');
v_rep := RUN_REPORT_OBJECT(repid);
END;
rgds
shyam

Hi
I can able to run the reports from the browser there was a syntax error, but not able to call from a form
I am getting error but i can run another forms without any problem
FRM-92101: There Was a failure in the FormsServer during startup
oracle.forms.net.connectionexception:forms session aborted:unable to communicate with the runtime process
rgds
rosh

Getting javascript error while opening offline adobe forms sent via email.

ERROR: script failed(language is formcalc,context is xfa[0].form[0].data[0].FORM[0].
 script = BODY.instanceManager.addInstance(1);
 Error:accessor "BODY.instanceManager.addInstance(1)" is unknown.
I have written the code in Javascript and run at client.
Below is my sample code:
var nlength = ROW.BODY.nodes.length;
var nrow = 0;
for(var nCount=0;nCount<nlength;nCount++)
{nrow = nrow + 1;}
if (nrow == 7)
xfa.host.messageBox("Maximum allowable rows is 7","Warning",3);
else
{ROW.BODY.instanceManager.addInstance(1);
xfa.form.recalculate(1);
xfa.host.messageBox("Row added");}
Rows are getting added.
I am not getting the problem,Pls help me.

Hello all,
 Thanks for your replies.
I have made Show -> click and Language -> Javascript and Run at -> Client for the button 'ADD'(this button inserts line) and in the blank space i have written the code as stated above.
Then,i have activated the form.
As per the Submit button it is working fine...
I am new to adobe forms and i have done a self-training for this..
Maybe I am doing something wrong...
Pls help.
Thanks and regards,
Raka.

Syntax error while running the Adobe Form

Hi to all,
I have created an interface for adobe from
Example: F4_HELP type ZST
Where ZST is structure type.
ZST structure has following field.
1) MATERIAL type MATNR
2) BASE_QTY type BASMN (BASMN of type QUAN, length 13 with ref table RC29K, and ref field BMEIN)
Interface and form successful activated.
But when I run adobe from it give syntax error for ref table RC29K, and ref field BMEIN
Field u201CRC29K- BMEIN u201Cis unknown. It is neither in one of the specified tables nor defined by a "DATA" statement.
Please can anyone tell me the solution for that?
I shall be thankful to you for this.
Regards
Pavneet Rana

Thanks For reply
I have already maintained the ref table and field for field BASE_QTY type BASMN
Ref table RC29K, and ref field BMEIN.
But still error is coming.
please can any one tell me the solution for that.
i shall be thankful to you for this.
Regards
Pavneet Rana

Page fault error while calling reports from forms

dear friends.
when a report is called from forms, just before opening up of background engine the application gets hanged with page fault. One has to forcibly shut down the application before loggin again.
The error mesage generated from log file is
Fatal NI connect error 12203, connecting to:
(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle80)(ARGV0=oracle80orcl)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))')))(CONNECT_DATA=(SID=orcl)(CID=(PR OGRAM=C:\ORAWIN95\BIN\RWRBE60.EXE)(HOST=SOUMYADIP)(USER=Soumya))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 8.0.5.0.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 8.0.4.0.0 - Production
Time: 06-MAY-00 14:03:32
Tracing not turned on.
Tns error struct:
nr err code: 12203
TNS-12203: TNS:unable to connect to destination
ns main err code: 12560
TNS-12560: TNS:protocol adapter error
ns secondary err code: 0
nt main err code: 102
TNS-00102: Keyword-Value binding operation error
nt secondary err code: 0
nt OS err code: 0
After closing if we run the report next time it runs, but after 3/4 attempts the above error again occurs.
Please Help
Prashant

I'm getting this also. I thought it was
due to my use of DATA PARAMETER. I've
logged TARS on this and have yet to hear
back from Oracle.
Maybe if enough of us get the error Oracle
will give some guidance on this one.

Error "Job already started" when calling a adobe form in Z function module

Hi All,
I have a error when calling a adobe form in a custom function module.
I am using FP_FUNCTION_MODULE_NAME to get the adobe form function module and then i am using FP_JOB_OPEN function module to control the printing parameters such as no print preview or no dialog ..etc.. I dont have any exceptions during the call of FP_JOB_OPEN function module ..
Later I am calling my function module which was generated for the adobe form and i am getting the error called " JOB ALREADY STARTED".
I tried executing the same function module in se37 and the PDF form output was generated, and also by commenting FP_JOB_OPEN function module the PDF form output was generated.
But i need the FP_JOB_OPEN function module to control the output based on the output type which triggers the form output such as the medium from nast record which says print or email or fax.. etc
Please let me know how to handling this error.

Just as a followup note. If you are testing a function module from SE37 and the test button you will get a value in SY-CPROG. You must override this value for everything to work.
If you override the value of SY-CPROG with the main program that will be calling the function module you have no problem.
John W.

Adobe form error while calling through SE80

Hi All,
We have done the ADS configuration in our server and it is running fine but when calling the adobe form through SE80 (Web Dynpro) its giving the following error-:
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_WD_GENERAL', was not caught and
therefore caused a runtime error.
The reason for the exception is:
WebDynpro Exception: ADS: com.adobe.ProcessingException: Could not retrieve a
password for credential: ReaderRights(200.101).
When I searched I came to know that we need to install a PKCS #12 file.
Correct me if I m wrong.
In Directory path I:\usr\sap\XIT\SYS\global\AdobeDocumentServices\TrustManagerService\trust
Certificates,Credentials and CRls directories are empty.
Pls suggest
Regards,
Prashant

Please check the following link for step by step configuration of credentials :
[https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f03414f8-d4ce-2a10-d4b6-ab201b329d98]
and the below link for temporary license :
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/70aa75cc-6ac3-2910-c78c-ade192ec861e]
Thanks
Naresh

Problem using RFC to call an adobe form to create pdf file........

Hi,
 I have an RFC that calls an adobe form to display the pdf output back in a bsp page...the RFC fails at the call to the adobe form (next call after after getting the form name) ...while debugging it looks like within this call it is trying to call fpcomp_job_open and failing on the call check_job_open ...
The code in my RFC looks like this....
DATA:
 gs_outputparams TYPE sfpoutputparams,
 fn_name TYPE rs38l_fnam,
 fp_docparams TYPE sfpdocparams,
 fp_formoutput TYPE fpformoutput,
 frm_result TYPE sfpjoboutput,
 lv_form TYPE fpname.
DATA: l_pdf_xstring TYPE xstring,
 l_pdf_len TYPE i.
lv_form = 'ZHR_ASSESSMENT_FORM'.
Start formrocessing - OPEN spool job to send to printer
gs_outputparams-getpdf = 'X'.
call function 'FP_JOB_OPEN'
 changing
 ie_outputparams = gs_outputparams
 exceptions
 others = 1.
IF sy-subrc <> 0.
*// RAISE FP Open Error.
 exit.
ENDIF.
Get name of the generated function module for the form
CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
 EXPORTING
 i_name = lv_form
 IMPORTING
 e_funcname = fn_name.
IF sy-subrc <> 0.
*// RAISE FP Get Form Module Name Error.
 exit.
ENDIF.
Call the Adobe Form
CALL FUNCTION fn_name
EXPORTING
 /1bcdwb/docparams = fp_docparams
 gv_appraisal_id = gv_appraisal_id
IMPORTING
 /1bcdwb/formoutput = fp_formoutput
 EXCEPTIONS
 usage_error = 1
 system_error = 2
 internal_error = 3
 others = 4.
IF sy-subrc <> 0.
*// RAISE Call Form Module Error.
 perform f_build_message using 'E'
 'ZEXT'
 012
 changing return.
 exit.
ENDIF.
End from processing - Close spool job
CALL FUNCTION 'FP_JOB_CLOSE'
 IMPORTING
 e_result = frm_result
 EXCEPTIONS
 usage_error = 1
 system_error = 2
 internal_error = 3
 OTHERS = 4.
IF sy-subrc <> 0.
*// RAISE FP Close Error.
 exit.
ENDIF.
form = fp_formoutput-pdf.
Thanks,
Venkatesh

what is the solution for this problem? I have the same problem. I get sy-subrc = 1 after CALL FUNCTION 'FPCOMP_JOB_OPEN'.
If I look more in detail I see that "Perform check_job_open" is creating the problem:
FORM check_job_open.
IF fpstat-is_opened = c_true. (--> exactly here is the problem. This condition is true so the program is terminated.)
 PERFORM reset_status.
 MESSAGE ID 'FPRUNX' TYPE 'E' NUMBER '101' RAISING usage_error.
ENDIF.
fpstat-is_opened = c_true.
fpstat-is_started = c_false.
ENDFORM.
Does somebody know why my job is open and what is the solution to have the job closed at the beginning of my processing?
Thanks in advance.

Error while calling the Mapping function module for BW Extraction

Hi
iam getting runtime error while calling the BW mapping function
The error description is as shown below.
Runtime Errors CALL_FUNCTION_UC_STRUCT
Except. CX_SY_DYN_CALL_ILLEGAL_TYPE
Short text
 Type conflict during structure parameter transfer at CALL FUNCTION.
What happened?
 Error in the ABAP Application Program
 The current ABAP program "GP466CV1Y7W2VML1PJ3VB80KDOP" had to be terminated
 because it has
 come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
 The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was
 not caught in
 procedure "CALL_MAPPING_FUNCTION" "(FORM)", nor was it propagated by a RAISING
 clause.
 Since the caller of the procedure could not have anticipated that the
 exception would occur, the current program is terminated.
 The reason for the exception is:
 In the function "CMS_CB_BW_MAP", the STRUCTURE parameter "EXTRACT_DATA" is
 typed in such a way
 that only actual parameters are allowed, which are compatible in Unicode
 with respect to the fragment view. However, the specified actual
 parameter " " has an incompatible fragment view.
I am passing the EXTRACT_DATA parameter as specification LIKE with the associated type - corresponding structure
Please let me know how can i resolve this issue
Regards
Leon

Dear benarji ,
I'm having the same problem help me to correct . I have mentioned below as what error i got.
Runtime Errors CALL_FUNCTION_UC_STRUCT
Except. CX_SY_DYN_CALL_ILLEGAL_TYPE
Short text
 Type conflict during structure parameter transfer at CALL FUNCTION.
What happened?
 Error in the ABAP Application Program
 The current ABAP program "ZDLROUTSTANDING_COPY" had to be terminated because it
 has
 come across a statement that unfortunately cannot be executed.
Error analysis
 An exception occurred that is explained in detail below.
 The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was
 not caught in
 procedure "PDF" "(FORM)", nor was it propagated by a RAISING clause.
 Since the caller of the procedure could not have anticipated that the
 exception would occur, the current program is terminated.
 The reason for the exception is:
 In the function "/1BCDWB/SF00000080", the STRUCTURE parameter "IT_WORKS_SF" is
 typed in such a way
 that only actual parameters are allowed, which are compatible in Unicode
 with respect to the fragment view. However, the specified actual
 parameter "SFTWORKS" has an incompatible fragment view.
Missing RAISING Clause in Interface
 Program ZDLROUTSTANDING_COPY
 Include ZDLROUTSTANDING_COPY
 Row 876
 Module type (FORM)
 Module Name PDF
Trigger Location of Exception
 Program ZDLROUTSTANDING_COPY
 Include ZDLROUTSTANDING_COPY
 Row 894
 Module type (FORM)
 Module Name PDF
Source Code Extract
Line SourceCde
864 ** i_logo = 'ENJOYSAP_LOGO'
865 * IT_LIST_COMMENTARY = I_LIST_COMMENTS1.
866
867 ENDFORM. "alv_top_of_page1
868 *&---------------------------------------------------------------------*
869 *& Form PDF
870 *&---------------------------------------------------------------------*
871 * text
872 *----------------------------------------------------------------------*
873 * --> p1 text
874 * <-- p2 text
875 *----------------------------------------------------------------------*
876 FORM pdf .
877
878 * *** Smartforms & PDF ***
879
880 ssfctrlop-no_dialog = 'X'.
881 ssfctrlop-preview = 'X'.
882 ssfctrlop-getotf = 'X'.
883 ssfcompop-tddest = 'ERP7'.
884 DATA : mcheck LIKE sy-subrc.
885 CLEAR : fm_name.
886
887 "Get Function module name for given smartform
888 CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
889 EXPORTING
890 formname = 'ZSFDLOS1'
891 IMPORTING
892 fm_name = fm_name.
893
>>>> CALL FUNCTION fm_name
895 EXPORTING
896 control_parameters = ssfctrlop
897 output_options = ssfcompop
898 mrefno = mrefno
899 * P_TITLE = MTITLE
900 IMPORTING
901 document_output_info = st_document_output_info
902 job_output_info = st_job_output_info " IT_OTF_DATA
903 job_output_options = st_job_output_options
904 TABLES
905 it_works_sf = sftworks
906 EXCEPTIONS
907 formatting_error = 1
908 internal_error = 2
909 send_error = 3
910 user_canceled = 4
911 OTHERS = 5.
912
913 IF sy-subrc NE 0.
Advance Thanks

Error while calling PERFORM in SAPSCRIPT

Hi all,
I am encoutering a error while calling a perform in sapscript.
Does anyone know what is the main cause?
The shortdump description is:
Short text
    Missing parameter with PERFORM.
I do not know what is missing here.
/: PERFORM GET_SPRAS IN PROGRAM ZPFI_F150_DUNN
/: USING &MHNK-KUNNR&
/: CHANGING &GV_SPRAS&
/: CHANGING &GV_LAND1&
/: ENDPERFORM
*&      Form GET_SPRAS
FORM GET_SPRAS TABLES intable   STRUCTURE itcsy
                      outtable STRUCTURE itcsy
                      outtable2 STRUCTURE itcsy.
DATA: lv_kunnr LIKE kna1-kunnr.
CLEAR: GV_SPRAS.
lv_kunnr = intable-value.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
    EXPORTING
      input = lv_kunnr
    IMPORTING
      output = lv_kunnr.
SELECT SINGLE LAND1 SPRAS INTO (gv_land1, gv_spras) FROM KNA1
    WHERE KUNNR = lv_kunnr.
IF sy-subrc = 0.
    READ TABLE outtable INDEX 1.
    outtable-value = gv_spras.
    MODIFY outtable INDEX 1.
    READ TABLE outtable2 INDEX 1.
    outtable2-value = gv_land1.
    MODIFY outtable INDEX 1.
ENDIF.
IF gv_land1 EQ 'DE'.
    CLEAR: GV_LAND1,
           GV_SPRAS.
ENDIF.
ENDFORM.

Hi,
Though there are a lot of importing parameters, you should give only one structure for outtable, and read as index 1 and index 2.
FORM GET_SPRAS TABLES intable   STRUCTURE itcsy
                                          outtable STRUCTURE itcsy.
DATA: lv_kunnr LIKE kna1-kunnr.
CLEAR: GV_SPRAS.
lv_kunnr = intable-value.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
    EXPORTING
      input = lv_kunnr
    IMPORTING
      output = lv_kunnr.
SELECT SINGLE LAND1 SPRAS INTO (gv_land1, gv_spras) FROM KNA1
    WHERE KUNNR = lv_kunnr.
IF sy-subrc = 0.
    READ TABLE outtable INDEX 1.
    outtable-value = gv_spras.
    MODIFY outtable INDEX 1.
    READ TABLE outtable INDEX 2.
    outtable-value = gv_land1.
    MODIFY outtable INDEX 2.
ENDIF.
IF gv_land1 EQ 'DE'.
    CLEAR: GV_LAND1,
           GV_SPRAS.
ENDIF.
ENDFORM.
Edited by: Srinivas Kalluri on Mar 30, 2009 5:00 AM
Edited by: Srinivas Kalluri on Mar 30, 2009 5:10 AM

How to avoid Print pop-up while using a Adobe form.

Hi Experts,
I am calling a adobe form from a BAPI.I am using the following function modules FP_FUNCTION_MODULE_NAME and CALL FUNCTION fun_name. But when I try to execute the BAPI a print preview pop-up appears.Please let me know the steps to avoid the print preview pop-up while execution of the BAPI.
Thanks in Advance.
Warm Regards,
Arun.

Hello
I don´t understand the connection between BAPI and the printing program. I guess - at least that is what I have done - is to generate the form when creating and invoice or something, then I could understand.
When you ask for GETPDF = 'X' then you always get the PDF data back and not the popup.
Or if you would like to display the print preview without a print settings popup. Or variants...
FUNCTION ZPDF_SET_OUTPUT_MODE.
*"*"Lokální rozhraní:
*" CHANGING
*" VALUE(FP_OUTPUTPARAMS) TYPE SFPOUTPUTPARAMS
fp_outputparams-dest = 'ZPDF'.
fp_outputparams-nodialog = 'X'.
fp_outputparams-preview = 'X'.
ENDFUNCTION.
regards Otto

Error during activation in adobe form

Hi Guys,
While activating the adobe form i am getting the error message as 'Error during activation' with out any futher details.Its not showing any error details.Appreciate you for your help.
Regards
Syed

Hi,
I am facing the same problem of "Error during activation" while activating the SAP interactive form.
I am using ECC 6.0, ADL 7.1 and Adobe reader 8.0
Could you please suggest a way out.
Thank You
Aser

Error while calling a adobe form?

Similar Messages

Maybe you are looking for