Error while calling badi using class cl_exithandler with getInstance
hi experts...we are using SAP ECC 6.0 version
I have created BADI Def and Implementation using se18 and se19 with some interface methods..
Problem:
I'm writing a report to call that using class CL_EXITHANDLER but it shows an Exception..
" Exception condition "DATA_INCONS_IN_EXIT_MANAGEM" raised."
Report example:
DATA: CL_EXIT TYPE REF TO CL_EXITHANDLER,
IF_USER_INSTANCE TYPE REF TO ZIF_EX_USER_MAILID1.
CALL METHOD cl_exithandler=>get_instance
EXPORTING
EXIT_NAME = 'ZBADI_USERMAIL_DEF'
* NULL_INSTANCE_ACCEPTED = SEEX_FALSE
* IMPORTING
* ACT_IMP_EXISTING =
CHANGING
instance = IF_USER_INSTANCE
* EXCEPTIONS
* NO_REFERENCE = 1
* NO_INTERFACE_REFERENCE = 2
* NO_EXIT_INTERFACE = 3
* CLASS_NOT_IMPLEMENT_INTERFACE = 4
* SINGLE_EXIT_MULTIPLY_ACTIVE = 5
* CAST_ERROR = 6
* EXIT_NOT_EXISTING = 7
* DATA_INCONS_IN_EXIT_MANAGEM = 8
* others = 9
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
so i found that all EXITs are in the Table " SXS_ATTR"
but what i have created BADI has not exist in that Table so that it gets an Exception(while i'm debugging found this)
so kindly tel me whats problem my BADI "ZBADI_USERMAIL_DEF" not maintained that Database table
but in Implentation class its working fine..
yes i have created badi in Enhancement spot so regarding what u told i'm using GET BADI and CALL BADI
DATA:W_HANDLE TYPE REF TO ZBADI_USERMAIL_DEF.
GET BADI W_HANDLE.
CALL BADI w_handle->get_user_mailid
EXPORTING
uname = UNAME
changing
mailid = W_EMAIL
WRITE: / 'UNAME:',UNAME.
WRITE: / 'EMAIL ID',W_EMAIL.
CALL BADI w_handle->get_user_address_data
EXPORTING
uname = UNAME
changing
addrdata = W_ADDRDATA
IF W_ADDRDATA IS NOT INITIAL.
WRITE: / W_ADDRDATA-BNAME,W_ADDRDATA-NAME1,W_ADDRDATA-NAME2,W_ADDRDATA-TELPR,W_ADDRDATA-TELNR,W_ADDRDATA-TEL01.
ENDIF.
but here BADI are not called
Interface implementation class methods not executed so kindly tel me whats problem here.
Thanks in Advance
sivakumar
Similar Messages
-
Error while calling a super class public method in the subclass constructor
Hi ,
I have code like this:
CLASS gacl_applog DEFINITION ABSTRACT.
PUBLIC SECTION.
METHODS:
create_new_a
IMPORTING pf_obj TYPE balobj_d
pf_subobj TYPE balsubobj
pf_extnumber TYPE string
EXPORTING pfx_log_hndl TYPE balloghndl
EXCEPTIONS error
ENDCLASS.
CLASS gacl_applog IMPLEMENTATION.
METHOD create_new_a.
DATA: ls_log TYPE bal_s_log.
Header aufsetzen
MOVE pf_extnumber TO ls_log-extnumber.
ls_log-object = pf_obj.
ls_log-subobject = pf_subobj.
ls_log-aluser = sy-uname.
ls_log-alprog = sy-repid.
ls_log-aldate = sy-datum.
ls_log-altime = sy-uzeit.
ls_log-aldate_del = ls_log-aldate + 1.
CALL FUNCTION 'BAL_LOG_CREATE'
EXPORTING
i_s_log = ls_log
IMPORTING
e_log_handle = pfx_log_hndl
EXCEPTIONS
OTHERS = 1.
IF ( sy-subrc NE 0 ).
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
RAISING error.
ENDIF.
ENDMETHOD.
CLASS gcl_applog_temp DEFINITION INHERITING FROM gacl_applog.
PUBLIC SECTION.
DATA: log_hndl TYPE balloghndl READ-ONLY
, t_log_hndl TYPE bal_t_logh READ-ONLY
METHODS: constructor
IMPORTING pf_obj TYPE balobj_d
pf_subobj TYPE balsubobj
pf_extnumber TYPE string
EXCEPTIONS error
, msg_add REDEFINITION
, display REDEFINITION
ENDCLASS.
CLASS gcl_applog_temp IMPLEMENTATION.
METHOD constructor.
CALL METHOD create_new_a
EXPORTING pf_obj = pf_obj
pf_subobj = pf_subobj
pf_extnumber = pf_extnumber
IMPORTING pfx_log_hndl = log_hndl.
IF ( sy-subrc NE 0 ).
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
RAISING error.
ENDIF.
ENDMETHOD.
A public method of Super class has been called from the constructor of the sub class. we are getting the syntax error :
' In the constructor method, you can only access instance attributes, instance methods, or "ME" after calling the constructor of the superclass '
Can you please suggest how to change the code with out affecting the functioanlity.
Thank you ,
Lakshmi.Hi,
Call that method by instance of Subclass. OR
SUPER-->method.
Read very useful document
Constructors
Constructors are special methods that cannot be called using CALL METHOD. Instead, they are called automatically by the system to set the starting state of a new object or class. There are two types of constructors - instance constructors and static constructors. Constructors are methods with a predefined name. To use them, you must declare them explicitly in the class.
The instance constructor of a class is the predefined instance method CONSTRUCTOR. You declare it in the public section as follows:
METHODS CONSTRUCTOR
IMPORTING.. [VALUE(]<ii>[)] TYPE type [OPTIONAL]..
EXCEPTIONS.. <ei>.
and implement it in the implementation section like any other method. The system calls the instance constructor once for each instance of the class, directly after the object has been created in the CREATE OBJECT statement. You can pass the input parameters of the instance constructor and handle its exceptions using the EXPORTING and EXCEPTIONS additions in the CREATE OBJECT statement.
The static constructor of a class is the predefined static method CLASS_CONSTRUCTOR. You declare it in the public section as follows:
CLASS-METHODS CLASS_CONSTRUCTOR.
and implement it in the implementation section like any other method. The static constructor has no parameters. The system calls the static constructor once for each class, before the class is accessed for the first time. The static constructor cannot therefore access the components of its own class.
Pls. reward if useful.... -
Error while recording process using a component with a custom data type
Hello,
I created a component that returns a CheckAttachmentResult object. This object contains an int named resultCode and a String named resultMessage. In the CheckAttachmentResult class, I do have a getter and a setter function for both values.
When I use the component, I can retrieve the CheckAttachmentResult object, see the values that are set (i.e. resultMessage and resultCode) and work on them (for instance build a condition on the resultCode).
However when the current process goes into a subprocess after having used this component, I get the following error:
Failed evaluating outgoing routes for action=template:ReceptionDtpBriefingV2/branch:main-branch/pool:POOL/swimlane:Extraction du DTP/action:Check DTP attachments: java.lang.NullPointerException at com.adobe.idp.auditworkflow.dsc.service.storage.ProcessRecordingStorageImpl.persistDocume ntVariables(ProcessRecordingStorageImpl.java:409)
at com.adobe.idp.auditworkflow.dsc.service.storage.ProcessRecordingStorageImpl.serialize(Pro cessRecordingStorageImpl.java:390)
at com.adobe.idp.auditworkflow.dsc.service.storage.ProcessRecordingStorageImpl.persist(Proce ssRecordingStorageImpl.java:151)
at com.adobe.idp.auditworkflow.dsc.service.AuditWorkflowServiceImpl.auditEvent(AuditWorkflow ServiceImpl.java:62)
at sun.reflect.GeneratedMethodAccessor1278.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.adobe.idp.dsc.component.impl.DefaultPOJOInvokerImpl.invoke(DefaultPOJOInvokerImpl.jav a:118)
at com.adobe.idp.dsc.interceptor.impl.InvocationInterceptor.intercept(InvocationInterceptor. java:140)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
at com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor$1.doInTransaction(Transa ctionInterceptor.java:74)
at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionCMTAdapterBean.execute(EjbTr ansactionCMTAdapterBean.java:342)
at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionCMTAdapterBean.doRequiresNew (EjbTransactionCMTAdapterBean.java:284)
at sun.reflect.GeneratedMethodAccessor236.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.jboss.invocation.Invocation.performCall(Invocation.java:345)
at org.jboss.ejb.StatelessSessionContainer$ContainerInterceptor.invoke(StatelessSessionConta iner.java:214)
at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionI nterceptor.java:149)
at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke(StatelessSessionInstance Interceptor.java:154)
at org.jboss.webservice.server.ServiceEndpointInterceptor.invoke(ServiceEndpointInterceptor. java:54)
at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:48)
at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:106)
at org.jboss.ejb.plugins.TxInterceptorCMT.runWithTransactions(TxInterceptorCMT.java:389)
at org.jboss.ejb.plugins.TxInterceptorCMT.invoke(TxInterceptorCMT.java:166)
at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:153)
at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:192)
at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor. java:122)
at org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:624)
at org.jboss.ejb.Container.invoke(Container.java:873)
at org.jboss.ejb.plugins.local.BaseLocalProxyFactory.invoke(BaseLocalProxyFactory.java:415)
at org.jboss.ejb.plugins.local.StatelessSessionProxy.invoke(StatelessSessionProxy.java:88)
at $Proxy169.doRequiresNew(Unknown Source)
at com.adobe.idp.dsc.transaction.impl.ejb.EjbTransactionProvider.execute(EjbTransactionProvi der.java:143)
at com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor.intercept(TransactionInt erceptor.java:72)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
at com.adobe.idp.dsc.interceptor.impl.InvocationStrategyInterceptor.intercept(InvocationStra tegyInterceptor.java:55)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
at com.adobe.idp.dsc.interceptor.impl.InvalidStateInterceptor.intercept(InvalidStateIntercep tor.java:37)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
at com.adobe.idp.dsc.interceptor.impl.AuthorizationInterceptor.intercept(AuthorizationInterc eptor.java:109)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
at com.adobe.idp.dsc.interceptor.impl.JMXInterceptor.intercept(JMXInterceptor.java:48)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
at com.adobe.idp.dsc.engine.impl.ServiceEngineImpl.invoke(ServiceEngineImpl.java:115)
at com.adobe.idp.dsc.routing.Router.routeRequest(Router.java:118)
at com.adobe.idp.dsc.provider.impl.base.AbstractMessageReceiver.routeMessage(AbstractMessage Receiver.java:91)
at com.adobe.idp.dsc.provider.impl.vm.VMMessageDispatcher.doSend(VMMessageDispatcher.java:21 5)
at com.adobe.idp.dsc.provider.impl.base.AbstractMessageDispatcher.send(AbstractMessageDispat cher.java:57)
at com.adobe.idp.dsc.clientsdk.ServiceClient.invoke(ServiceClient.java:208)
at com.adobe.workflow.audit.WorkflowAudit.invokeCallback(WorkflowAudit.java:471)
at com.adobe.workflow.audit.WorkflowAudit.breakpointRouteEvaluationCompleted(WorkflowAudit.j ava:268)
at com.adobe.workflow.engine.PEUtil.evaluateRules(PEUtil.java:425)
at com.adobe.workflow.engine.SynchronousBranch.getNextActionOrStallOnFailure(SynchronousBran ch.java:801)
at com.adobe.workflow.engine.SynchronousBranch.updateBranchInstanceStatus(SynchronousBranch. java:649)
at com.adobe.workflow.engine.SynchronousBranch.execute(SynchronousBranch.java:887)
at com.adobe.workflow.engine.ProcessEngineBMTBean.continueBranchAtAction(ProcessEngineBMTBea n.java:2773)
at com.adobe.workflow.engine.ProcessEngineBMTBean.asyncInvokeProcessCommand(ProcessEngineBMT Bean.java:704)
at sun.reflect.GeneratedMethodAccessor503.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.jboss.invocation.Invocation.performCall(Invocation.java:345)
at org.jboss.ejb.StatelessSessionContainer$ContainerInterceptor.invoke(StatelessSessionConta iner.java:214)
at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionI nterceptor.java:149)
at org.jboss.webservice.server.ServiceEndpointInterceptor.invoke(ServiceEndpointInterceptor. java:54)
at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:48)
at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:106)
at org.jboss.ejb.plugins.AbstractTxInterceptorBMT.invokeNext(AbstractTxInterceptorBMT.java:1 58)
at org.jboss.ejb.plugins.TxInterceptorBMT.invoke(TxInterceptorBMT.java:62)
at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke(StatelessSessionInstance Interceptor.java:154)
at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:153)
at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:192)
at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor. java:122)
at org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:624)
at org.jboss.ejb.Container.invoke(Container.java:873)
at org.jboss.ejb.plugins.local.BaseLocalProxyFactory.invoke(BaseLocalProxyFactory.java:415)
at org.jboss.ejb.plugins.local.StatelessSessionProxy.invoke(StatelessSessionProxy.java:88)
at $Proxy202.asyncInvokeProcessCommand(Unknown Source)
at com.adobe.workflow.engine.ProcessCommandControllerBean.doOnMessage(ProcessCommandControll erBean.java:156)
at com.adobe.workflow.engine.ProcessCommandControllerBean.onMessage(ProcessCommandController Bean.java:99)
at sun.reflect.GeneratedMethodAccessor457.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.jboss.invocation.Invocation.performCall(Invocation.java:345)
at org.jboss.ejb.MessageDrivenContainer$ContainerInterceptor.invoke(MessageDrivenContainer.j ava:475)
at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionI nterceptor.java:149)
at org.jboss.ejb.plugins.MessageDrivenInstanceInterceptor.invoke(MessageDrivenInstanceInterc eptor.java:101)
at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:106)
at org.jboss.ejb.plugins.TxInterceptorCMT.runWithTransactions(TxInterceptorCMT.java:335)
at org.jboss.ejb.plugins.TxInterceptorCMT.invoke(TxInterceptorCMT.java:166)
at org.jboss.ejb.plugins.RunAsSecurityInterceptor.invoke(RunAsSecurityInterceptor.java:94)
at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:192)
at org.jboss.ejb.MessageDrivenContainer.internalInvoke(MessageDrivenContainer.java:389)
at org.jboss.ejb.Container.invoke(Container.java:873)
at org.jboss.ejb.plugins.jms.JMSContainerInvoker.invoke(JMSContainerInvoker.java:1077)
at org.jboss.ejb.plugins.jms.JMSContainerInvoker$MessageListenerImpl.onMessage(JMSContainerI nvoker.java:1379)
at org.jboss.jms.asf.StdServerSession.onMessage(StdServerSession.java:256)
at org.jboss.mq.SpyMessageConsumer.sessionConsumerProcessMessage(SpyMessageConsumer.java:904 )
at org.jboss.mq.SpyMessageConsumer.addMessage(SpyMessageConsumer.java:160)
at org.jboss.mq.SpySession.run(SpySession.java:333)
at org.jboss.jms.asf.StdServerSession.run(StdServerSession.java:180)
at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:748)
at java.lang.Thread.run(Thread.java:595)
It turns out that this error is related to the recording of the process. When I stop the recording, this error disappears. Do you have any idea on what goes wrong ? Did I miss something or made something wrong ?
I attached the component.xml file of the component to this post.
Thank you in advance
SteveThis seems to be recorded in CAR#405941. The whole thing is a bit strange but I will try to go over the potential workarounds as best as I can. I tested a lot of these myself and here is what I found.
1. Make sure the custom control you have made was created in LabVIEW 2012 or you save it to a previous version. If you save it to a previous version you might also need to open the .ctl in LabVIEW 2012 and resave it (I needed to do this). I tried creating my own control in 2012 as well as saving the control to a previous version, both worked but I did not end up with the same result (I don't understand this but I wanted to mention it so that you knew).
2. It seems that you are able to make the shared variable programmatically by modifying the community example to fit your needs. If you do not need to create many variables this may be the best option if it works for you.
I would also try adding the variable from the LabVIEW project you are working on. This was not a direct troubleshooting step but there are multiple ways to do things in LabVIEW and sometimes one of them works while the other does not.
Edit: Community Example is here https://decibel.ni.com/content/docs/DOC-16863
Matt J
Professional Googler and Kudo Addict
National Instruments -
Error while calling java using pl/sql
hi..
i would like to load and call simple java into oracle database. this is my simple java code.
public class SimpleJava {
public void main(String[] args) {
System.out.println("Here we are");
then, i created .class file and ready to be loaded into oracle database using loadjava utility. i already loaded it successfully into a database. but, when i use pl/sql to call it in SQl*Plus, i got this error.... can anyone help me to solve this problem?
SQL> create or replace procedure call_simplejava
2 as language java
3 name 'SimpleJava.showMessage()';
4 /
Procedure created.
SQL> set serveroutput on;
SQL> call dbms_java.set_output(50);
Call completed.
SQL> execute call_simplejava;
java.lang.NoSuchMethodException: No applicable method found
at
oracle.aurora.util.JRIExtensions.getMaximallySpecificMethod(JRIExtensions.java:4
33)
at
oracle.aurora.util.JRIExtensions.getMaximallySpecificMethod(JRIExtensions.java:4
75)
BEGIN call_simplejava; END;
ERROR at line 1:
ORA-29531: no method showMessage in class SimpleJava
ORA-06512: at "GISDB.CALL_SIMPLEJAVA", line 1
ORA-06512: at line 1Hi,
public class SimpleJava {
public void main(String[] args) {
System.out.println("Here we are");
then, i created .class file and ready to be loaded into oracle database using loadjava utility. i already loaded it successfully into a database. but, when i use pl/sql to call it in SQl*Plus, i got this error.... can anyone help me to solve this problem?Did you run the SimpleJava in your ED or on command prompt??
I created the same class file but when I said
java SimpleJava
It threw the following error
java.lang.NoSuchMethodException: No applicable method found
So modify your code
as
public class SimpleJava {
public static void main(String[] args) {
System.out.println("Here we are");
}Twinkle -
Error while calling RFC when using BSP Web Interface
Hi,
we have a problem with the Authorization when we use an Web Interface for BSP. We have assigned all roles to the user which were mentioned in the SAP standard documentation:
R_AREA
R_METHOD
R_PACKAGE
R_PARAM
R_PLEVEL
R_PM_NAME
R_PROFILE
R_STS_PT
R_STS_SUP
R_WEBITF
S_RS_ADMWB
S_RS_AUTH
S_RS_COMP
S_RS_COMP1
S_RS_DAS
S_RS_ICUBE
but we still get the error message: "Error while calling RFC".
When using a user with SAP_ALL, it works.
What can we do?
Thx for your time.
JoergActually that's surprising - because BSP (Business Server Pages) and RFC (Remote Function Call) are not related; they use totally different transport protocols (http vs. RFC). Even if an BSP application is calling a function module remotely (acting as RFC client) no authorizations for S_RFC are required - in the calling system (but in the called system, i.e. the RFC server).
Since assigning SAP_ALL seems to "cure" the problem, it seems to be an authorization issue, indeed. In that case it makes sense to use the authorization trace (ST01 - notice: that's specific to one single ABAP application server; you might have to activate the trace on multiple instances) to find out which authorizations are checked / demanded. -
Type error while calling function module with in FOX formula
Hi,
I am getting following error while calling function module from FOX Formula:
"Types of parameter DAY_IN () and variable J_CALDAY(D) are inconsistent"
Following is the code:
DATA I_CALDAY TYPE 0CALDAY.
DATA N_CALDAY TYPE 0CALDAY.
DATA KYF TYPE KEYFIGURE_NAME.
FOREACH I_CALDAY, KYF.
CALL FUNCTION SLS_MISC_GET_LAST_DAY_OF_MONTH
EXPORTING
DAY_IN = I_CALDAY
IMPORTING
LAST_DAY_OF_MONTH = N_CALDAY.
{KYF, N_CALDAY} = {KYF, L_CALDAY}.
ENDFOR.
Import parameter DAY_IN is of type sy-datum (that inturn is data element SYDATUM of data type DATS - same as 0CALDAY). Not sure why error is being thrown. Any idea? Thanks.
Edited by: SAP_BOY on Dec 4, 2009 5:26 PMHi,
I think It will not identify ,though you have (data element SYDATUM of data type DATS - same as 0CALDAY).Check it out by assigning it through a variable of type D.
Data I_CALDAY TYPE D.
Hope it may work out.
Regards,
Indu -
Error while calling WebService inside ISchedulerTask.
Hi,
Env: NW 2004s
I have a requirement of calling webservice frequently. I developed a portal project with scheduler, where the application gives a runtime error while calling/reading the property file (which is generated during the webservice proxy generation, without it webservice call is impossible).
I have varified the ear file which contains all the required class files and config files including property file.
fyi:
portalapp.xml file looks like this.
+
<?xml version="1.0" encoding="utf-8"?>
<application>
<application-config>
<property name="SharingReference" value="usermanagement, knowledgemanagement, landscape, htmlb, exportalJCOclient, exportal"/>
</application-config>
<components/>
<services>
<service name="RFServiceWrapper">
<service-config>
<property name="className" value="com.sap.netweaver.rf.wrapper.RFServiceWrapper"/>
<property name="startup" value="true"/>
</service-config>
</service>
</services>
</application>
+
Any input will be highly appreciated.
Thanks,
VinodFollowing is the error message:
msg1:
at <package>.AFFERAAFWSServiceImpl.<init>(AFFERAAFWSServiceImpl.java:10)
msg2:
at com.sap.engine.services.webservices.jaxrpc.wsdl2java.ServiceBase.loadProtocolsFromPropertyFile(ServiceBase.java:238)
Reporting from Logs and Traces.
Error Located @ following code inside AFFERAAFWSServiceImpl.java, which is a proxy class generated using apache axis
input = this.getClass().getClassLoader().getResourceAsStream("<package>/protocols.txt");
loadProtocolsFromPropertyFile(input);
protocols.txt is another config file generated along with AFFERAAFWSServiceImpl.java, which is been used @ run time.
FYI: All these files are present on ear file. -
Error while insert data using execute immediate in dynamic table in oracle
Error while insert data using execute immediate in dynamic table created in oracle 11g .
first the dynamic nested table (op_sample) was created using the executed immediate...
object is
CREATE OR REPLACE TYPE ASI.sub_mark AS OBJECT (
mark1 number,
mark2 number
t_sub_mark is a class of type sub_mark
CREATE OR REPLACE TYPE ASI.t_sub_mark is table of sub_mark;
create table sam1(id number,name varchar2(30));
nested table is created below:
begin
EXECUTE IMMEDIATE ' create table '||op_sample||'
(id number,name varchar2(30),subject_obj t_sub_mark) nested table subject_obj store as nest_tab return as value';
end;
now data from sam1 table and object (subject_obj) are inserted into the dynamic table
declare
subject_obj t_sub_mark;
begin
subject_obj:= t_sub_mark();
EXECUTE IMMEDIATE 'insert into op_sample (select id,name,subject_obj from sam1) ';
end;
and got the below error:
ORA-00904: "SUBJECT_OBJ": invalid identifier
ORA-06512: at line 7
then when we tried to insert the data into the dynam_table with the subject_marks object as null,we received the following error..
execute immediate 'insert into '||dynam_table ||'
(SELECT887684 wrote:
ORA-00904: "SUBJECT_OBJ": invalid identifier
ORA-06512: at line 7The problem is that your variable subject_obj is not in scope inside the dynamic SQL you are building. The SQL engine does not know your PL/SQL variable, so it tries to find a column named SUBJECT_OBJ in your SAM1 table.
If you need to use dynamic SQL for this, then you must bind the variable. Something like this:
EXECUTE IMMEDIATE 'insert into op_sample (select id,name,:bind_subject_obj from sam1) ' USING subject_obj;Alternatively you might figure out to use static SQL rather than dynamic SQL (if possible for your project.) In static SQL the PL/SQL engine binds the variables for you automatically. -
Error while calling the Mapping function module for BW Extraction
Hi
iam getting runtime error while calling the BW mapping function
The error description is as shown below.
Runtime Errors CALL_FUNCTION_UC_STRUCT
Except. CX_SY_DYN_CALL_ILLEGAL_TYPE
<b>Short text</b>
Type conflict during structure parameter transfer at CALL FUNCTION.
<b>What happened?</b>
Error in the ABAP Application Program
The current ABAP program "GP466CV1Y7W2VML1PJ3VB80KDOP" had to be terminated
because it has
come across a statement that unfortunately cannot be executed.
<b>Error analysis</b>
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was
not caught in
procedure "CALL_MAPPING_FUNCTION" "(FORM)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
In the function "CMS_CB_BW_MAP", the STRUCTURE parameter "EXTRACT_DATA" is
typed in such a way
that only actual parameters are allowed, which are compatible in Unicode
with respect to the fragment view. However, the specified actual
parameter " " has an incompatible fragment view.
I am passing the EXTRACT_DATA parameter as specification LIKE with the associated type - corresponding structure
Please let me know how can i resolve this issue
Regards
LeonDear benarji ,
I'm having the same problem help me to correct . I have mentioned below as what error i got.
Runtime Errors CALL_FUNCTION_UC_STRUCT
Except. CX_SY_DYN_CALL_ILLEGAL_TYPE
Short text
Type conflict during structure parameter transfer at CALL FUNCTION.
What happened?
Error in the ABAP Application Program
The current ABAP program "ZDLROUTSTANDING_COPY" had to be terminated because it
has
come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was
not caught in
procedure "PDF" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
In the function "/1BCDWB/SF00000080", the STRUCTURE parameter "IT_WORKS_SF" is
typed in such a way
that only actual parameters are allowed, which are compatible in Unicode
with respect to the fragment view. However, the specified actual
parameter "SFTWORKS" has an incompatible fragment view.
Missing RAISING Clause in Interface
Program ZDLROUTSTANDING_COPY
Include ZDLROUTSTANDING_COPY
Row 876
Module type (FORM)
Module Name PDF
Trigger Location of Exception
Program ZDLROUTSTANDING_COPY
Include ZDLROUTSTANDING_COPY
Row 894
Module type (FORM)
Module Name PDF
Source Code Extract
Line SourceCde
864 ** i_logo = 'ENJOYSAP_LOGO'
865 * IT_LIST_COMMENTARY = I_LIST_COMMENTS1.
866
867 ENDFORM. "alv_top_of_page1
868 *&---------------------------------------------------------------------*
869 *& Form PDF
870 *&---------------------------------------------------------------------*
871 * text
872 *----------------------------------------------------------------------*
873 * --> p1 text
874 * <-- p2 text
875 *----------------------------------------------------------------------*
876 FORM pdf .
877
878 * *** Smartforms & PDF ***
879
880 ssfctrlop-no_dialog = 'X'.
881 ssfctrlop-preview = 'X'.
882 ssfctrlop-getotf = 'X'.
883 ssfcompop-tddest = 'ERP7'.
884 DATA : mcheck LIKE sy-subrc.
885 CLEAR : fm_name.
886
887 "Get Function module name for given smartform
888 CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
889 EXPORTING
890 formname = 'ZSFDLOS1'
891 IMPORTING
892 fm_name = fm_name.
893
>>>> CALL FUNCTION fm_name
895 EXPORTING
896 control_parameters = ssfctrlop
897 output_options = ssfcompop
898 mrefno = mrefno
899 * P_TITLE = MTITLE
900 IMPORTING
901 document_output_info = st_document_output_info
902 job_output_info = st_job_output_info " IT_OTF_DATA
903 job_output_options = st_job_output_options
904 TABLES
905 it_works_sf = sftworks
906 EXCEPTIONS
907 formatting_error = 1
908 internal_error = 2
909 send_error = 3
910 user_canceled = 4
911 OTHERS = 5.
912
913 IF sy-subrc NE 0.
Advance Thanks -
Finding an error while calling an RFC
Hi,
My requirement is as follows.
The internal table(ITAB) which i am using has a field X of length 20 and the Internal table(RFCITAB) field Y found the RFC is of length 10. Here i am creating another 3rd internal table(ITAB1) with field Z of length 10 and i am moving the content of field X from ITAB to ITAB1 and i am passing Z value of ITAB1 to the RFC.
While executing it i am getting the error 'Interface data error'.
please let me know why this error is getting populated.
Regards,
SumiHi,
I have a field lenght of 20 digits in BKPF-AWKEY and it has value of only 10 digits.
I am moving this 10 digits to a new field in a new internal table and i am passing this value to the RFC.
I am getting error while calling the RFC.
Regards,
Yamini.A -
Error while calling the EAI Viewer
Dear all,
I am working on Document Management System ECC 6.00
I am able to upload a PDF document in to the system, but when i save it and try to call the document back it is giving me the folllowing error."Error while calling the EAI Viewer" But when i try to open the same in the next PC it is opening. the work station application which i have defined is EAIWeb.webviewer2D.1 %SAP-CONTROL% for the application .pdf.
Kindly suggest what will be the problem as it is not opening in my PC but opening in an different PC with the same user name.
Kindly suggest.Hi Kishuz ,
ECL Viewer comes with SAP
It is Engineering client viewer, which works for files like *.jt(jupiter technology), *.pdf(acrobat), *.dwg(autocad), *.step, *.iges
with ECL viewer you can view files like dwg without having Autocad Installed on your machine.
Alos it gives redlining feature...
thus layers help in indicating the modifications needed or commenting on the drawings...
Now the procedure for installation,
1. Install the latest SUN JAVA version. The path could be <b>c:\program files\java\</b>
2. While installing SAP GUI, ensure that the ECL component is not selected from R/3 Add On.
4. Install ECL Viewer 5.1.2 on local machine.
5. Ensure the path is as follows :(C:\Program Files\Common Files\SAP Shared\System or C:\Program Files\Common Files\SAP Shared\System\Java )
6. Ensure that the following files are in the <b>c:\program files\java\1.5.0_08\lib\ext</b>
folder:
- VisWebS.jar,
- VisWeb.jar,
- eaisupport.jar,
- eaisupportS.jar
- version.ini
- vctk.ini
In case, please copy the mentioned files from <ECL Install DIR>\java.
(C:\Program Files\Common Files\SAP Shared\System or
C:\Program Files\Common Files\SAP Shared\System\Java )
Reward points if useful...
regards
Niranjan -
Error while calling PERFORM in SAPSCRIPT
Hi all,
I am encoutering a error while calling a perform in sapscript.
Does anyone know what is the main cause?
The shortdump description is:
Short text
Missing parameter with PERFORM.
I do not know what is missing here.
/: PERFORM GET_SPRAS IN PROGRAM ZPFI_F150_DUNN
/: USING &MHNK-KUNNR&
/: CHANGING &GV_SPRAS&
/: CHANGING &GV_LAND1&
/: ENDPERFORM
*& Form GET_SPRAS
FORM GET_SPRAS TABLES intable STRUCTURE itcsy
outtable STRUCTURE itcsy
outtable2 STRUCTURE itcsy.
DATA: lv_kunnr LIKE kna1-kunnr.
CLEAR: GV_SPRAS.
lv_kunnr = intable-value.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = lv_kunnr
IMPORTING
output = lv_kunnr.
SELECT SINGLE LAND1 SPRAS INTO (gv_land1, gv_spras) FROM KNA1
WHERE KUNNR = lv_kunnr.
IF sy-subrc = 0.
READ TABLE outtable INDEX 1.
outtable-value = gv_spras.
MODIFY outtable INDEX 1.
READ TABLE outtable2 INDEX 1.
outtable2-value = gv_land1.
MODIFY outtable INDEX 1.
ENDIF.
IF gv_land1 EQ 'DE'.
CLEAR: GV_LAND1,
GV_SPRAS.
ENDIF.
ENDFORM.Hi,
Though there are a lot of importing parameters, you should give only one structure for outtable, and read as index 1 and index 2.
FORM GET_SPRAS TABLES intable STRUCTURE itcsy
outtable STRUCTURE itcsy.
DATA: lv_kunnr LIKE kna1-kunnr.
CLEAR: GV_SPRAS.
lv_kunnr = intable-value.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = lv_kunnr
IMPORTING
output = lv_kunnr.
SELECT SINGLE LAND1 SPRAS INTO (gv_land1, gv_spras) FROM KNA1
WHERE KUNNR = lv_kunnr.
IF sy-subrc = 0.
READ TABLE outtable INDEX 1.
outtable-value = gv_spras.
MODIFY outtable INDEX 1.
READ TABLE outtable INDEX 2.
outtable-value = gv_land1.
MODIFY outtable INDEX 2.
ENDIF.
IF gv_land1 EQ 'DE'.
CLEAR: GV_LAND1,
GV_SPRAS.
ENDIF.
ENDFORM.
Edited by: Srinivas Kalluri on Mar 30, 2009 5:00 AM
Edited by: Srinivas Kalluri on Mar 30, 2009 5:10 AM -
Error while trying to use '{' in the query
Hi,
The below mentioned query is giving Error while trying to use '{'
Query:
select s,x from table(SEM_MATCH(
'{?s rdf:type <http://www.cs.com/sbip/dwh/mdm/data_modeling#Base_Term> .
?s ?p ?x}',
SEM_Models('foundation'),
SEM_RuleBases('OWLPRIME'),
SEM_ALIASES(SEM_ALIAS('dm','http://www.cs.com/sbip/dwh/mdm/data_modeling#'),
SEM_ALIAS('owl','http://www.w3.org/2002/07/owl#')), null, 'INVALID'))
where regexp_like(x,'Customers','i');
Error details:
ORA-29532: Java call terminated by uncaught Java exception: oracle.spatial.rdf.server.TokenMgrError: Lexical error at line 1, column 1. Encountered: "{" (123), after : ""
ORA-06512: at "MDSYS.RDF_MATCH_IMPL_T", line 178
ORA-06512: at "MDSYS.RDF_MATCH_IMPL_T", line 67
ORA-06512: at line 4
I am unable to use Option, Filter in query.
Any solution?
Please let me know do i need to apply any patch?
Note: I am using Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
Regards,
Kavitha.Hi,
For OPTIONAL support in 11.1.0.7.0, you need the following patch
Patch 7600122: CURLY BRACE SYNTAX,VIRTUAL MODELS, NETWORK INDEXES AND HINTO FRAMEWORK SUPPORT
Support for SPARQL FILTERs in SEM_MATCH is not available for 11.1.0.7.0. You will need version 11.2.0.1.0 or later for FILTER support. With 11.2.0.1.0, we recommend that you apply our latest patch set:
Patch 9819833: SEMANTIC TECHNOLOGIES 11G R2 FIX BUNDLE 2
All of the above patches are available through My Oracle Support.
Thanks,
Matt -
Error while executing SAP E-Commerce Application with UME system
When attempting to login to the B2B application (http://hostname:port/b2b/init.do), we receive the following error:
Error while executing SAP E-Commerce Application with UME system; try again to log on. If the problem persists, call our hotline.
I checked the defaultTrace log and every time the login page is called the following messages are displayed:
#System.err#sap.com/crm~b2b#System.err#Guest#0##n/a##70cf2ba0756b11df86050003ba827311#SAPEngine_Application_Thread[impl:3]_0##0#0#Error##Plain###com.sap.engine.services.servlets_jsp.server.exceptions.WebIllegalStateException: The output is committed.
#System.err#sap.com/crm~b2b#System.err#Guest#0##n/a##70cf2ba0756b11df86050003ba827311#SAPEngine_Application_Thread[impl:3]_0##0#0#Error##Plain### at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:354)#
another 40 lines of similar text
When a login is attempted, the following messages are appended to the trace file:
#tracing.isa.runtime#sap.com/crm~b2b#tracing.isa.runtime#Guest#0##n/a##f6384ec0756b11df81380003ba827311#SAPEngine_Application_Thread[impl:3]_0##0#0#Debug##Plain###[actionxecution]='begin' [actionclass]='com.sap.isa.user.action.PrepareLoginBaseAction' [path]='/preparelogin'#
tracing.isa.runtime#sap.com/crm~b2b#tracing.isa.runtime#USER1#7439##n/a##f6384ec0756b11df81380003ba827311#SAPEngine_Application_Thread[impl:3]_0##0#0#Debug##Plain###[actionxecution]='end' [actionclass]='com.sap.isa.user.action.PrepareLoginBaseAction' [path]='/preparelogin' [forward]='/login.do' [exectime]='42'#
#tracing.isa.runtime#sap.com/crm~b2b#tracing.isa.runtime#USER1#7439##n/a##f6384ec0756b11df81380003ba827311#SAPEngine_Application_Thread[impl:3]_0##0#0#Debug##Plain###[jcofuncionexecution]='begin' [funcname]='CRM_ISA_SSO_LOGIN_CHECKS' [ashost]='<hostname>' [sysid]='CRM'#
#tracing.isa.runtime#sap.com/crm~b2b#tracing.isa.runtime#USER1#7439##<hostname>_CJM_678801250#USER1#f6384ec0756b11df81380003ba827311#SAPEngine_Application_Thread[impl:3]_0##0#0#Debug##Plain###[jcofunctionexecution]='end' [funcname]='CRM_ISA_SSO_LOGIN_CHECKS' [ashost]='<hostname>' [sysid]='CRM' [exectime]='12'#
I have modified the userid and hostname in the above trace output.
Does anyone know how we can debug this issue further?
Thanks,
SetuHi,
Are you using UME login type for your B2B Scenario?
In your B2B XCM setting have you selected UME related login type?
eCommerce Developer -
Getting error while calling this BAPI:Field MATNR has been transferred inco
Hi,
I have a rquirement to upload material master data into sap for Plant 1251.(For plant 1251 we need to upload both Basi veiw and Extended View).
I am getting the following error while calling this BAPI.Field MATNR has been transferred inconsistently or is blank
the errror is :Field MATNR has been transferred inconsistently or is blank.
I have written the below logic in the program to upload material master data into SAP.
Please help me out to resolve this issue.
Thanks in advance.
Program logic which i have wriiten in the program is
LOOP AT it_rpt.
CLEAR lwa_return.
v_tabix = sy-tabix.
IF ( it_rpt-werks EQ p_werks AND
it_rpt-matnr IS INITIAL ).
retrieve internal number
PERFORM get_internal_number USING lc_mtart
lc_mbrsh
CHANGING it_rpt-matnr.
ENDIF.
IF NOT it_rpt-matnr IS INITIAL.
PERFORM convert_field_input CHANGING it_rpt-matnr.
ENDIF.
Header data
CLEAR lwa_headdata.
lwa_headdata-material = it_rpt-matnr.
lwa_headdata-ind_sector = lc_mbrsh.
lwa_headdata-matl_type = lc_mtart.
lwa_headdata-basic_view = 'X'.
IF NOT it_rpt-vkorg IS INITIAL.
lwa_headdata-sales_view = 'X'.
ENDIF.
lwa_headdata-purchase_view = 'X'.
lwa_headdata-mrp_view = 'X'.
lwa_headdata-storage_view = 'X'.
lwa_headdata-forecast_view = 'X'.
lwa_headdata-work_sched_view = 'X'.
lwa_headdata-account_view = 'X'.
lwa_headdata-cost_view = 'X'.
*Client data
CLEAR: lwa_clientdata, lwa_clientdatax.
IF it_rpt-werks EQ c_1251.
lwa_clientdata-matl_group = it_rpt-matkl.
lwa_clientdata-old_mat_no = it_rpt-bismt.
lwa_clientdata-base_uom = it_rpt-meins.
lwa_clientdata-manu_mat = it_rpt-mfrpn.
lwa_clientdata-mfr_no = it_rpt-mfrnr.
ENDIF.
lwa_clientdata-division = it_rpt-spart.
lwa_clientdata-unit_of_wt = lc_gewei.
lwa_clientdata-trans_grp = lc_tragr.
IF it_rpt-werks EQ c_1251.
lwa_clientdatax-matl_group = 'X'.
lwa_clientdatax-old_mat_no = 'X'.
lwa_clientdatax-base_uom = 'X'.
lwa_clientdatax-manu_mat = 'X'.
lwa_clientdatax-mfr_no = 'X'.
ENDIF.
lwa_clientdatax-unit_of_wt = 'X'.
lwa_clientdatax-trans_grp = 'X'.
lwa_clientdatax-division = 'X'.
Material Description
IF it_rpt-werks EQ c_1251.
lt_matdesc-langu = sy-langu.
lt_matdesc-matl_desc = it_rpt-maktx.
APPEND lt_matdesc.
ENDIF.
*Plant data
CLEAR lwa_plantdata.
lwa_plantdata-plant = it_rpt-werks.
lwa_plantdata-availcheck = lc_mtvfp.
lwa_plantdata-mrp_type = lc_dismm.
lwa_plantdata-mrp_group = lc_disgr.
lwa_plantdata-auto_p_ord = 'X'.
lwa_plantdata-proc_type = 'F'.
IF it_rpt-werks EQ c_1251.
it_rpt-prctr = lc_prctr. "1252
ELSEIF it_rpt-werks EQ c_1261.
it_rpt-prctr = lc_prctr1. "1262
ENDIF.
lwa_plantdata-profit_ctr = it_rpt-prctr.
lwa_plantdata-period_ind = lc_perkz.
lwa_plantdata-max_stock = it_rpt-stawn.
lwa_plantdata-countryori = it_rpt-herkl.
lwa_plantdata-sloc_exprc = it_rpt-lgfsb.
CLEAR lwa_plantdatax.
lwa_plantdatax-plant = it_rpt-werks.
lwa_plantdatax-availcheck = 'X'.
lwa_plantdatax-mrp_type = 'X'.
lwa_plantdatax-mrp_group = 'X'.
lwa_plantdatax-auto_p_ord = 'X'.
lwa_plantdatax-proc_type = 'X'.
lwa_plantdatax-profit_ctr = 'X'.
lwa_plantdata-period_ind = 'X'.
lwa_plantdatax-max_stock = 'X'.
lwa_plantdatax-countryori = 'X'.
lwa_plantdatax-sloc_exprc = 'X'.
*Valuation data
CLEAR lwa_valuationdata.
lwa_valuationdata-val_area = it_rpt-werks.
lwa_valuationdata-price_ctrl = lc_vprsv.
lwa_valuationdata-price_unit = lc_peinh.
lwa_valuationdata-val_class = it_rpt-bklas.
CLEAR lwa_valuationdatax.
lwa_valuationdatax-val_area = it_rpt-werks.
lwa_valuationdatax-price_ctrl = 'X'.
lwa_valuationdatax-price_unit = 'X'.
lwa_valuationdatax-val_class = 'X'.
*Storage location
CLEAR lwa_storagelocation.
lwa_storagelocation-plant = it_rpt-werks.
lwa_storagelocation-stge_loc = it_rpt-lgort.
CLEAR lwa_storagelocationx.
lwa_storagelocationx-plant = it_rpt-werks.
lwa_storagelocationx-stge_loc = it_rpt-lgort.
*Tax Classifications
IF it_rpt-werks EQ c_1251.
it_rpt-tatyp = lc_tatyp. "u2018MWSTu2019
ELSEIF it_rpt-werks EQ c_1261.
it_rpt-tatyp = lc_tatyp1. "u2018UTXJu2019
ENDIF.
lt_taxclass-tax_type_1 = it_rpt-tatyp.
lt_taxclass-taxclass_1 = lc_taxkm.
lt_taxclass-tax_ind = lc_taxim.
APPEND lt_taxclass.
*Sales data
CLEAR: lwa_salesdata, lwa_salesdatax.
IF it_rpt-werks EQ c_1251.
it_rpt-vkorg = lc_vkorg.
ELSEIF it_rpt-werks EQ c_1261.
it_rpt-vkorg = lc_vkorg1.
ENDIF.
lwa_salesdata-sales_org = it_rpt-vkorg.
lwa_salesdata-distr_chan = lc_vtweg.
lwa_salesdata-cash_disc = lc_sktof.
lwa_salesdata-item_cat = lc_mtpos.
lwa_salesdatax-sales_org = it_rpt-vkorg.
lwa_salesdatax-distr_chan = lc_vtweg.
lwa_salesdatax-cash_disc = 'X'.
lwa_salesdatax-item_cat = 'X'.
*Forecast parameters
CLEAR: lwa_forecast, lwa_forecastx.
lwa_forecast-plant = it_rpt-werks.
lwa_forecast-fore_model = lc_prmod.
lwa_forecast-fore_pds = lc_anzpr.
lwa_forecast-hist_vals = lc_peran.
lwa_forecastx-plant = it_rpt-werks.
lwa_forecastx-fore_model = 'X'.
lwa_forecastx-fore_pds = 'X'.
lwa_forecastx-hist_vals = 'X'.
Purchasing long text
IF it_rpt-werks EQ c_1251.
IF it_rpt-tdline1 <> ' '.
lv_tdobject = 'MATERIAL'.
lv_tdid = 'BEST'.
lv_tdname = it_rpt-matnr.
PERFORM fill_longtext TABLES lt_longtext
USING lv_tdobject
lv_tdname
lv_tdid
sy-langu
it_rpt-tdline1.
ENDIF.
Basic long text
IF it_rpt-tdline2 <> ' '.
lv_tdobject = 'MATERIAL'.
lv_tdid = 'GRUN'.
lv_tdname = it_rpt-matnr.
PERFORM fill_longtext TABLES lt_longtext
USING lv_tdobject
lv_tdname
lv_tdid
sy-langu
it_rpt-tdline2.
ENDIF.
*Units of measure
CLEAR : lt_uom,lt_uomx.
lt_uom-alt_unit = it_rpt-meins.
lt_uom-alt_unit_iso = it_rpt-meins.
lt_uom-unit_of_wt = it_rpt-gewei.
APPEND lt_uom.
lt_uomx-alt_unit = it_rpt-meins.
lt_uomx-alt_unit_iso = it_rpt-meins.
lt_uomx-unit_of_wt = 'X'.
APPEND lt_uomx.
ENDIF.
CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
EXPORTING
headdata = lwa_headdata
clientdata = lwa_clientdata
clientdatax = lwa_clientdatax
plantdata = lwa_plantdata
plantdatax = lwa_plantdatax
forecastparameters = lwa_forecast
forecastparametersx = lwa_forecastx
storagelocationdata = lwa_storagelocation
storagelocationdatax = lwa_storagelocationx
valuationdata = lwa_valuationdata
valuationdatax = lwa_valuationdatax
salesdata = lwa_salesdata
salesdatax = lwa_salesdatax
IMPORTING
return = lwa_return
TABLES
materialdescription = lt_matdesc
unitsofmeasure = lt_uom
unitsofmeasurex = lt_uomx
materiallongtext = lt_longtext
taxclassifications = lt_taxclass
returnmessages = it_messages.
Regards,
ReddyCan you check with below code .
CALL FUNCTION 'CONVERSION_EXIT_MATN1_INPUT'
EXPORTING
INPUT = it_rpt-matnr
IMPORTING
OUTPUT = it_rpt-matnr
EXCEPTIONS
LENGTH_ERROR = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Move it_rpt-matnr to lwa_headdata-material .
Regard's
Smruti
Maybe you are looking for
-
In Select query how to fetch values through multiple parameters where conditon
Dear Experts, I have one table(T) with 4 fields: f1, f2, f3, f4. In that based on f2, f3, f4 and parameter condition( f2 values) how to fetch f1 values. I have attached screen shot. What is the where condition in select query? DATA: it_T type standar
-
My BB has just Died - Please Help.. what can I do
I have a blackberry curve 8520, for no reason it died. I tried to turn back on but nothing; I swapped over to another battery - I was able to get a red light and the blackberry screen flashed up but then disappeared then reappeared as if it was loadi
-
Material stock in material master
Hi , In which view of material master can I see the stock of current and previous period. Regards Kumar
-
I am having a problem with the Facebook application.Whenever I type the username and password and then try to log in,I get a message that they don't match.What could be the cause? Nokia E63-1, RM-437, 510.21.010 Nokia C5-00.2,RM-745,091.002
-
A very slow machine (ibook G4)
How do I deal with my extremely slow ibook of late. I am unable to do anything without the beach ball spinning for at least 5 minutes. My hard drive is almost full (that may help) and if this is the reason how do i retrieve space without getting rid