Error while configuring channels in B2B 11g

Hi b2bgurus,
I am implementing RosettaNet protocol in 11g. 3C3 Invoice Notification. While configuring channels i got this following error:
"Messages for this page are listed below.
Acme_Custom_V02.00_Invoice_Notification_Outbound is not valid. Please correct the following errors.
Error -: B2B-52255: Certificate alias not specified in the secure delivery channel Acme_Channel.
Error -: B2B-52326: Transport protocol with https url has to have valid keystore location and password in host "
I get the above error while I provide http url as input. Do we have a protocol where we can provide https url?
Please explain i am new to B2B.
Thanks in advance

get this error when i provide the url while channel creation. SSL is enabled by using BIG IP. Hence preparation of Key store is not requiredYou understanding is not correct. If you are initiating a SSL connection from Oracle B2B (by giving a HTTPS URL in delivery channel), then you have to configure identity and trust store in your Weblogic servers (SOA server) and you have to configure keystore on Oracle B2B console as well. As I mentioned earlier also refer the blog (http://anuj-dwivedi.blogspot.com/2010/10/enabling-ssl-on-oracle-b2b-11g.html) and perform the required steps.
If you don't configure a keystore then you CAN NOT initiate a SSL connection from Oracle B2B.
If you want Big IP to handle SSL then from Oracle B2B you have to initiate a plain HTTP connection and at BIG IP you have to route the request to the respective HTTPS channel (which I am not sure is possible though I am not familier with BIG IP)
Regards,
Anuj

Similar Messages

Error while configuring SSL in OID 11g - LDAP 50 Insufficient Access rights

HI,
I am trying to configure SSL in OID 11g.As per the doc http://download.oracle.com/docs/cd/E12839_01/oid.1111/e10029/ssl.htm#CBHGBGAF ,i tried creating a Self-Signed Wallte using Fusion Middleware control,But i am getting an error LDAP 50: Insufficient access rights".I logged into Fusion Middle Ware control as Weblogic user.Is anybody faced this issue?.Thanks in advance.

I am not sure how you tried, but I would recommend to do the following...
1. Add the 'user1' to "OU=Franchisees,ou=People,dc=company,dc=com"
2. Delete the 'user1' from 'OU=Internal,ou=People,dc=company,dc=com'

Agilent N6702A - Error While Configuring Channel 4

Hi Guys,
I'm using the Agilent N6700 LabVIEW drivers for configuring the instrument. I am able to configure the first 3 channels whithout any problem but when I try to configure the Channel 4, it throws and error -222 " Data Out Of Range". I'm able to configure the channel 4 physcally on the instrument but not from LabVIEW.
Has anyone faced this issue??
Any help would be appreciated.
regards,
Nitz
Solved!
Go to Solution.

Hey Guys,
I kind of figured out the issue myself. The Channel 4 was grouped with Channel 3 in which case, only the lower channel (ch3) is configurable which will inturn configure the entire group. I was missing this point which I found in the data sheet.
Thank you all who looked into this post and tried to help.
regards,
Nitzz

Error while configuring VM for SOA 11g

Hi,
I am getting below error message while running the VM after +" Import the VM (File-->Import Appliance)+
+Click Choose... to browse the file system and select the file vbox-oel5u4-soabpm-11gr1ps2-bp1-otn.ovf+
+Click Next "+
Can someone pls help me on this.
Error message:-
Result Code:
VBOX_E_OBJECT_IN_USE (0x80BB000C)
Component:
Medium
Interface:
IMedium {9edda847-1279-4b0a-9af7-9d66251ccc18}
Failed to import appliance C:\Users\bk\Desktop\VMWARE\vbox-oel5u4-soabpm-11gr1ps2-bp1-otn.ovf.
Medium 'C:\Users\Baljeet Antim\VirtualBox VMs\vbox-oel5u4-soabpm-11gr1ps2-bp1-otn_1\vbox-oel5u4-soabpm-11gr1ps2bp1-root_2.vmdk'
cannot be closed because it is still attached to 1 virtual machines.
http://www.oracle.com/technetwork/middleware/soasuite/learnmore/vmsoa-172279.html

I got the problem - it was due to one of the corrupt file

Error in configuring SOA from jdev 11g TP4

i get an error while configuring SOA from jdev 11g, error is in Test DB setting in first step. These are the details
DB Connection String : localhost:1521:XE
DB User Name: adrs_soainfra
DB Password: welcome1
error is “There was a problem in establishin a test connection to [localhost:1521:XE]. please review your Database settings and retry(oracle.jdbc.driver.T4CTTIoer processError
SEVERE: Throwing SQLException: ORA-00942: table or view does not exist
942
DB is up and connected via SQLPLUS. All required env parameters are there i.e ORACLE_HOME, PATH, ORACLE_SID

This error is due to the scripts not being run correctly. Read the instructions carefully and run them again. The first script is run as user "sys", the second one as your user you indicate in the parameters to the first script. Make sure you use the _all scripts.
Heidi.

Error while trying to start oc4j 11g in standalone mode

I get this error while trying to start oc4j 11g (that comes with JDeveloper 11g Technical Preview 2 ) in standone mode. Any ideas ?
Sep 17, 2007 6:29:21 PM com.sun.faces.spi.InjectionProviderFactory createInstance
INFO: jsf.core.injection.provider_generic_web_configured
Sep 17, 2007 6:29:23 PM org.apache.myfaces.trinidad.component.UIXComponentBase _createType
SEVERE: Could not load type properties
java.lang.NullPointerException
at oracle.classloader.PolicyClassLoader.findLocalClass(PolicyClassLoader.java:1491)
at oracle.classloader.SearchPolicy$FindLocal.getClass(SearchPolicy.java:226)
at oracle.classloader.SearchSequence.getClass(SearchSequence.java:119)
at oracle.classloader.SearchPolicy.loadClass(SearchPolicy.java:852)
at oracle.classloader.PolicyClassLoader.askParentForClass(PolicyClassLoader.java:1315)
at oracle.classloader.SearchPolicy$AskParent.getClass(SearchPolicy.java:72)
at oracle.classloader.SearchSequence.getClass(SearchSequence.java:119)
at oracle.classloader.SearchPolicy.loadClass(SearchPolicy.java:852)
at oracle.classloader.PolicyClassLoader.askParentForClass(PolicyClassLoader.java:1315)
at oracle.classloader.SearchPolicy$AskParent.getClass(SearchPolicy.java:72)
at oracle.classloader.SearchSequence.getClass(SearchSequence.java:119)
at oracle.classloader.SearchPolicy.loadClass(SearchPolicy.java:852)
at oracle.classloader.PolicyClassLoader.askParentForClass(PolicyClassLoader.java:1315)
at oracle.classloader.SearchPolicy$AskParent.getClass(SearchPolicy.java:72)
at oracle.classloader.SearchSequence.getClass(SearchSequence.java:119)
at oracle.classloader.SearchPolicy.loadClass(SearchPolicy.java:852)
at oracle.classloader.PolicyClassLoader.askParentForClass(PolicyClassLoader.java:1315)
at oracle.classloader.SearchPolicy$AskParent.getClass(SearchPolicy.java:72)
at oracle.classloader.SearchSequence.getClass(SearchSequence.java:119)
at oracle.classloader.PolicyClassLoader.internalLoadClass(PolicyClassLoader.java:1681)
at oracle.classloader.PolicyClassLoader.loadClass(PolicyClassLoader.java:1642)
at oracle.classloader.PolicyClassLoader.loadClass(PolicyClassLoader.java:1627)
at org.apache.myfaces.trinidad.component.UIXComponentBase._createType(UIXComponentBase.java:1393)
at org.apache.myfaces.trinidad.component.UIXComponentBase.<clinit>(UIXComponentBase.java:96)
at oracle.adfinternal.view.faces.renderkit.rich.DialogRenderer.<init>(DialogRenderer.java:34)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
at java.lang.Class.newInstance0(Class.java:350)
at java.lang.Class.newInstance(Class.java:303)
at com.sun.faces.config.ConfigureListener.configure(ConfigureListener.java:1024)
at com.sun.faces.config.ConfigureListener.configure(ConfigureListener.java:1096)
at com.sun.faces.config.ConfigureListener.configure(ConfigureListener.java:505)
at com.sun.faces.config.ConfigureListener.contextInitialized(ConfigureListener.java:398)
at com.evermind.server.http.HttpApplication.initDynamic(HttpApplication.java:1285)
at com.evermind.server.http.HttpApplication.<init>(HttpApplication.java:856)
at com.evermind.server.ApplicationStateRunning.getHttpApplication(ApplicationStateRunning.java:473)
at com.evermind.server.Application.getHttpApplication(Application.java:753)
at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.createHttpApplicationFromReference(HttpSite.java:2039)
at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.<init>(HttpSite.java:1958)
at com.evermind.server.http.HttpSite.initApplications(HttpSite.java:645)
at com.evermind.server.http.HttpSite.setConfig(HttpSite.java:289)
at com.evermind.server.http.HttpServer.setSites(HttpServer.java:270)
at com.evermind.server.http.HttpServer.setConfig(HttpServer.java:177)
at com.evermind.server.ApplicationServer.initializeHttp(ApplicationServer.java:2747)
at com.evermind.server.ApplicationServer.setConfig(ApplicationServer.java:1255)
at com.evermind.server.ApplicationServerLauncher.run(ApplicationServerLauncher.java:129)
at java.lang.Thread.run(Thread.java:595)
07/09/17 18:29:26 Oracle Containers for J2EE 10g (11.1.1.0.0) initialized
Thanks
Ramesh

Using the OTN2 tech preview build 4684 now available on OTN, I used the JDEVHOME/jdev/bin/start_oc4j script to startup the embedded server in standalone mode and cannot reproduce these errors.
Can you try with build 4684 from OTN and see if the same issue still reproduces?
If so, does it occur even before ever deploying any applications of your own to the instance?

Error while Configuring environment parameters

Hi,
I am installling Oracle Utilities Business Intelligence 2.3.2 version . I am getting error while configuring Environment Paramameters
Database- Oracle 11g R2
OS- Windows Server 2008
1. Environment Description
Environment Description: DEV01
2. Business Application Server Configuration
Business Server Host: 01HW342889
WebLogic Server Name: myserver
Business Server Application Name: SPLService
MPL Admin Port Number: 6502
MPL Automatic startup: false
3. Web Application Server Configuration
Web Server Host: 01HW342889
Web Server Port Number: 6500
WebLogic SSL Port Number: 6501
Web Context Root: ouaf
WebLogic JNDI User ID: systemjndi
WebLogic JNDI Password: ENC(tEky0TX65m0nDNIlnX
CcwlbnXl2b1kMnvE8DD0wfI1Y=)
WebLogic Admin System User ID: {3DES}gg8gG+5N+gwJBPWG
IhRRuQ==
WebLogic Admin System Password: {3DES}gg8gG+5N+gwJBPWG
IhRRuQ==
WebLogic Server Name: myserver
Web Server Application Name: SPLWeb
Application Admin User ID: appladmin
Application Admin Password: ENC(OrIg4HyDLxi2kQ6uSs
cBz4cubUr2U5BbRl75SY2pP6Q=)
Expanded Directories: false
Application Viewer Module: true
4. Database Configuration
JDBC Name: oubi-jdbc
MPL Database User ID: SPLADMV2
MPL Database Password: ENC(mfG7quacTagw5qEvov
oaQIRpnogRvroY4NcXp6WZCZo=)
XAI Database User ID: SPLADMV2
XAI Database Password: ENC(tNfRJUthvYQR990TzW
314nXU+5jWBuYBDs5AgT5qG7g=)
Batch Database User ID: SPLADMV2
Batch Database Password: ENC(L5BXr/lXp/riShr9Lp
kFDsgUIjDm5I6TJU5Suz0Wy/k=)
JDBC Database User ID: SPLADMV2
JDBC Database Password: {3DES}L43JfrbOrCtupkwm
4I/Adw==
Database Name: DEV1
Database Server: 01HW342889
Database Port: 1701
ONS Server Configuration:
Database Override Connection String:
Oracle Client Character Set NLS_LANG: AMERICAN_AMERICA.UTF8
5. General Configuration Options
Batch RMI Port: 6509
Batch Mode: CLUSTERED
Coherence Cluster Name: OUBICLUSTER1
Coherence Cluster Address: 172.25.138.45
Coherence Cluster PORT: 6508
Coherence Cluster Mode: dev
Each item in the above list should be configured for a successful install.
Choose option (1,2,3,4,5, <P> Process, <X> Exit): P
--> Calculating additional variables ... done.
--> Writing variables to E:\OUBI2\ouaf\temp\FW.V4.0.2\tmp\2011-06-10-0954\ENVIRO
N.INI ... done.
Can't open E:\OUBI2\ouaf\temp\FW.V4.0.2\install_FW_E:\OUBI2\ouaf\DEV01.log for o
utput at E:\OUBI2\ouaf\temp\FW.V4.0.2\data\bin\perllib/SPL/splLog.pm line 190.
"ERROR - Detected while running install.plx."
Thks,
Mohan

This is a common error people get when configuring Repository Service in Admin Console...
Main reason for this is that there is an incompatible bit versions of Oracle Database and Informatica Server and windows. Try to reinstall Oracle DB or Infa Server and tryconfiguring the same it will work
Or it could be parameter issues if it is linux...
Please mark helpful this post

Error while Configuring Repository INS0017: Installation of the seeded data

I am getting error while configuring repository at 36%
Error:
Seeding Failed:
The warehouse builder workspace owner installation failed on user OWBSYS.
INS0017:Installation of the seeded data failed java.io.FileNotFoundException:
xmlClasses.xml (Access is denied)
Operating system: Windows 2008 server 64 bit
Database: Oracle 11g Release 11.2.0.1.0 64 bit
Log file is not created in given location(Unified repos)

Hi David,
But we have successfully Created the Repository(Using Repository Assistance) using OWB 10.2.0.4 on Oracle 11.1.0.7 Db on Solaris OS.
and i also checked the Metalink it say the OWB 10.2.0.4 can be used with Oracle 11.1.0.7 Db.
Nawneet

Dac error while configuring

Hello All,
I am trying to configure Dac on windows7 64 bit but getting the error...
Configuration: Windows7 64bit
Oracle DB: Oracle 11g
Dac Version : 10.1.3.4.1
Informatica: 9x
Obiee 11g
Already copy the file odjbc5.jar file into dac_home\bifoundation\dac\lib
Created the user Dac_rep with all the required privileges.
But still getting below error while configuring and testing:
MESSAGE:::The Network Adapter could not establish the connection
EXCEPTION CLASS::: java.sql.SQLException
oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:412)
oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:531)
oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:221)
oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:503)
java.sql.DriverManager.getConnection(DriverManager.java:582)
java.sql.DriverManager.getConnection(DriverManager.java:185)
com.siebel.etl.gui.login.LoginDataHandler$LoginStructure.testConnection(LoginDataHandler.java:514)
com.siebel.etl.gui.login.LoginDataHandler.testConnection(LoginDataHandler.java:386)
com.siebel.etl.gui.login.ConnectionTestDialog$Executor.run(ConnectionTestDialog.java:290)
::: CAUSE :::
MESSAGE:::The Network Adapter could not establish the connection
EXCEPTION CLASS::: oracle.net.ns.NetException
oracle.net.nt.ConnStrategy.execute(ConnStrategy.java:359)
oracle.net.resolver.AddrResolution.resolveAndExecute(AddrResolution.java:422)
oracle.net.ns.NSProtocol.establishConnection(NSProtocol.java:672)
oracle.net.ns.NSProtocol.connect(NSProtocol.java:237)
oracle.jdbc.driver.T4CConnection.connect(T4CConnection.java:1042)
oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:301)
oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:531)
oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:221)
oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:503)
java.sql.DriverManager.getConnection(DriverManager.java:582)
java.sql.DriverManager.getConnection(DriverManager.java:185)
com.siebel.etl.gui.login.LoginDataHandler$LoginStructure.testConnection(LoginDataHandler.java:514)
com.siebel.etl.gui.login.LoginDataHandler.testConnection(LoginDataHandler.java:386)
com.siebel.etl.gui.login.ConnectionTestDialog$Executor.run(ConnectionTestDialog.java:290)
::: CAUSE :::
MESSAGE:::Connection refused: connect
EXCEPTION CLASS::: java.net.ConnectException
java.net.PlainSocketImpl.socketConnect(Native Method)
java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
java.net.Socket.connect(Socket.java:519)
oracle.net.nt.TcpNTAdapter.connect(TcpNTAdapter.java:141)
oracle.net.nt.ConnOption.connect(ConnOption.java:123)
oracle.net.nt.ConnStrategy.execute(ConnStrategy.java:337)
oracle.net.resolver.AddrResolution.resolveAndExecute(AddrResolution.java:422)
oracle.net.ns.NSProtocol.establishConnection(NSProtocol.java:672)
oracle.net.ns.NSProtocol.connect(NSProtocol.java:237)
oracle.jdbc.driver.T4CConnection.connect(T4CConnection.java:1042)
oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:301)
oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:531)
oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:221)
oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:503)
java.sql.DriverManager.getConnection(DriverManager.java:582)
java.sql.DriverManager.getConnection(DriverManager.java:185)
com.siebel.etl.gui.login.LoginDataHandler$LoginStructure.testConnection(LoginDataHandler.java:514)
com.siebel.etl.gui.login.LoginDataHandler.testConnection(LoginDataHandler.java:386)
com.siebel.etl.gui.login.ConnectionTestDialog$Executor.run(ConnectionTestDialog.java:290)
Kindly help, already googled but no luck.
Thanks & Regards
Anu

Check your config.bat config
just in case refere this Oracle BI Solutions: DAC - Installation and Configuration v10.1.3.4.1 on Windows

SQM uploader error while configuring BizTalk Server

Hi,
I am getting following error while configuring BizTalk Server 2013 on Windows Azure VM
Log Name: Application
Source: Application Error
Date: 8/26/2013 1:08:46 PM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: BizTalk2013VM
Description:
Faulting application name: SqmUploader.exe, version: 3.10.229.0, time stamp: 0x50fe35e2
Faulting module name: KERNELBASE.dll, version: 6.1.7601.18015, time stamp: 0x50b8479b
Exception code: 0xe0434352
Fault offset: 0x0000000000009e5d
Faulting process id: 0x988
Faulting application start time: 0x01cea27eec7ba1b4
Faulting application path: C:\Program Files (x86)\Microsoft BizTalk Server 2013\CEIP\SqmUploader.exe
Faulting module path: C:\Windows\system32\KERNELBASE.dll
Report Id: 2acf119c-0e72-11e3-9e61-00155d6120c3
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-08-26T17:08:46.000000000Z" />
<EventRecordID>32154</EventRecordID>
<Channel>Application</Channel>
<Computer>BizTalk2013VM</Computer>
<Security />
</System>
<EventData>
<Data>SqmUploader.exe</Data>
<Data>3.10.229.0</Data>
<Data>50fe35e2</Data>
<Data>KERNELBASE.dll</Data>
<Data>6.1.7601.18015</Data>
<Data>50b8479b</Data>
<Data>e0434352</Data>
<Data>0000000000009e5d</Data>
<Data>988</Data>
<Data>01cea27eec7ba1b4</Data>
<Data>C:\Program Files (x86)\Microsoft BizTalk Server 2013\CEIP\SqmUploader.exe</Data>
<Data>C:\Windows\system32\KERNELBASE.dll</Data>
<Data>2acf119c-0e72-11e3-9e61-00155d6120c3</Data>
</EventData>
</Event>
Any help will be highly appreciated.

Hi Nilesh,
Following article should help you:
http://social.technet.microsoft.com/wiki/contents/articles/11426.windows-azure-biztalk-services-resources-on-the-technet-wiki.aspx
I hope this helps!!!!!!
Maheshkumar S. Tiwari|BizTalk Developer Interview Questions and Answers
http://tech-findings.blogspot.com/

Getting error while configuring OIM11gR2 on windows 64 bit machiine

Hi,
I am getting below error while configuring OIM 11gR2: INST-6193: The attribute JpsContextName in MBean com.oracle.sdp.messaging:Location=soa_server1, name=ServerConfig, type=SDPMessagingServerConfig,Application=usermessagingserver not found. Check the SOA version comparability.
My system details are: Windows 7 64 bit
Installables downloaded from Oracle cloud:
Oracle WebLogic Server 11gR1 (10.3.6) Generic and Coherence
Oracle SOA Suite 11g Patch Set 5 (11.1.1.6.0) (Part 1 of 2)
Oracle SOA Suite 11g Patch Set 5 (11.1.1.6.0) (Part 2 of 2)
Oracle Fusion Middleware Repository Creation Utility 11g (11.1.1.6.0) for Microsoft Windows
Oracle Identity and Access Management 11g (11.1.2.1.0) (Part 1 of 2)
Oracle Identity and Access Management 11g (11.1.2.1.0) (Part 2 of 2)
Oracle Database 11g Release 2 (11.2.0.1.0) for Microsoft Windows x64 (64-bit) (Part 1 of 2)
Oracle Database 11g Release 2 (11.2.0.1.0) for Microsoft Windows x64 (64-bit) (Part 2 of 2)
Please let me know if I have to apply some patches.
Regards,
Kalpana

you might want to look at this:
Installation and Configuration Issues for Oracle Identity and Access Management - 11g Release 2 (11.1.2.1)

Getting an error while configuring VMM for System Center 2012. error - An internal error has occurred trying to contact an agent on the WIN-NTJU8CNU server: : . Ensure the agent is installed and running.

Hi,
I am trying to install "System Center 2012 - Virtual Machine Manager by Using a Pre-Configured VHD".
I downloaded install guide & the binaries from http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=10712
I have followed the installation document & getting an error while configuring VMM for System Center 2012.
error details from log file given below:
01:12:24:VMMPostinstallProcessor threw an exception: Threw Exception.Type: Microsoft.Carmine.WSManWrappers.WSManProviderException, Exception.Message: An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
01:12:24:StackTrace:   at Microsoft.Carmine.WSManWrappers.ErrorContextParameterHelper.ThrowTranslatedCarmineException(WsmanSoapFault fault, COMException ce)
   at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.RetrieveUnderlyingWMIErrorAndThrow(SessionCacheElement sessionElement, COMException ce)
   at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
   at Microsoft.Carmine.WSManWrappers.AgentManagement.AssociateLibrary(WsmanAPIWrapper wsmanObject, String CertificateSubjectName, String& ExportedCertificate, ErrorInfo& ErrorInfo)
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateAgentServer(String fullyQualifiedServerName)
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateDefaultLibraryServer()
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.SetupLibraryShare()
   at Microsoft.VirtualManager.Setup.InstallItemCustomDelegates.PangaeaServerPostinstallProcessor()
01:12:24:InnerException.Type: System.Runtime.InteropServices.COMException, InnerException.Message: There is a time and/or date difference between the client and server.
01:12:24:InnerException.StackTrace:   at WSManAutomation.IWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
   at Microsoft.Carmine.WSManWrappers.MyIWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
   at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
01:12:24:ProcessInstalls: Running the PostProcessDelegate returned false.
01:12:24:ProcessInstalls: Running the PostProcessDelegate for PangaeaServer failed.... This is a fatal item. Setting rollback.
01:12:24:SetProgressScreen: FinishMinorStep.
01:12:24:ProcessInstalls: Rollback is set and we are not doing an uninstall so we will stop processing installs
I have completed MSSQL server configuration and while configuring VMM the below error displayed in the wizard:
An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
I have checked that the following services are running:
1) Verified WS-Management srvice 2) MSSQL server + MSSQL (agent) 3)SC VM Manager Agent 4) Windows management instrumentation .
I have joined the VM (on which installing SC VMM) in a domain(as per install guide) and installing VMM using domain account & it is in local Administrators group.
Also I would like know if there is any stand alone SC VMM installer. If yes then please let me know the installer location & install guide.
thanks.
====

Have you installed AppController on the same machine with VMM?

Error while configuring work repository details in topology Manager

Hi,
Could anyone pls advice, is it possible creating more than one Master repository connection for the same instance.
When i try to do so, am getting the below error while configuring the work repository details in topology manager.
“A work repository already exists for this connection.
Enter the repository password to declare it in your Master Repository”
I tried with both the new master and work repository password. But no luck.
Previous Master & work details:
Master: PCS_MASTER
Work:PCS_WORKREP
New Details
Master: PCS_MASTER_INT
Work:PCS_WORKREP_INT
Instance: PCBID
Am trying to create new master repository for PCS_MASTER_INT.

In the same oracle schema you can have only 1 master and 1 work repository. Usually they take 2 schema (1 for each).
If you need 2 master repository you have to use 2 different jdbc path. I'm using a db with several master / work, each repo has got its schema..

Error while configuring talent profile for ESS

Dear Experts
I am having following error while configuring talent profile for ESS:
The URL http://pplkhidr05.ppl.com.pk:8000/sap/bc/webdynpro/sap/hrtmc_employee_profile was not called due to an error.
Note
The following error text was processed in the system TRG : Access via 'NULL' object reference not possible.
The error occurred on the application server PPLKHIDR05_TRG_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: GET_PLVAR of program /1BCWDY/81IYQOEI3SKMOOB9TXW5==CP
Method: IWCI_HRTMC_TP_SHARED_DATA~GET_PLVAR of program /1BCWDY/81IYQOEI3SKMOOB9TXW5==CP
Method: OVERRIDE_EVENT_OIF of program /1BCWDY/828X5HC99194NVUUKJ30==CP
Method: IWCI_IF_FPM_OIF_CONF_EXIT~OVERRIDE_EVENT_OIF of program /1BCWDY/828X5HC99194NVUUKJ30==CP
Method: GET_UIBBS_FOR_EVENT of program /1BCWDY/7V06LYNNPH3D2G2T1W0Z==CP
Method: IWCI_IF_FPM_FLOORPLAN_COMP~GET_UIBBS_FOR_EVENT of program /1BCWDY/7V06LYNNPH3D2G2T1W0Z==CP
Method: IF_FPM_FLOORPLAN~GET_UIBBS_FOR_EVENT of program CL_FPM_OIF_INTERNAL===========CP
Method: GET_NEXT_UIBBS of program CL_FPM========================CP
Method: PROCESS_EVENT of program CL_FPM========================CP
Method: RUN_EVENT_LOOP of program CL_FPM========================CP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system TRG in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server PPLKHIDR05_TRG_00 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server PPLKHIDR05_TRG_00 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Any suggestions on how to resolve the error?
Regards
Imran

Imran,
check this thread
http://forums.sdn.sap.com/click.jspa?searchID=43957204&messageID=8996092
Thanks
Bala Duvvuri

Error While Configuring the Shared Service with Active Directory

Hi All,
I am getting a error while configuring MSAD with Shared Service, when entering the User Id and password and clicking next, the following error is displayed:
"EPMCSS-05180:Failed to validate Security configuration. Failed to connect. Invalid values for Base DN, User DN or Password. Enter valid value(s). Root Cause : [LDAP: error code 49 - 80090308: LdapErr: DSID-0C0903A9, comment: AcceptSecurityContext error, data 52e, v1db1]"
The AD user has the read access to the all users and group in Active Directory. If I use an Active Directory user with Admin privilege, It is getting connected.
But client is not ready to provide the Admin Access due to their internal policy and I also don't have any document which says admin privilege is required. According to the document,the user should have the following privileges only.
"The distinguished name of the user that Shared Services should use to bind with the user directory. This user must have search privilege on the RDN attribute within the DN. For example, in the dn: cn=John Doe, ou=people, dc=myCompany, dc=com, the bind user should have search access to the cn attribute.Special characters in User DN must be specified using escape characters. See “Using Special Characters” on page 46 for restrictions.
Example: cn=admin,dc=myCompany,dc=com
But I am getting confused with the statement "This user must have search privilege on the RDN attribute within the DN". Is it not search privillege?
Can anybody help me with required privilege for Active Directory user to configure with Shared Service.
Thanks in Advance,
Sunil

Thank you All,
i tried connecting using AD Browser from Microsoft, and it went in properly. then i found out that the AD Team here were giving a Wrong Credentials to connect, they Gave me HYP_OID which infact turned out to be a Principal name instead of a 'cn'.
after searching in the AD Browser i found the correct cn which is "Hyperion OID", then it went to the second Screen where now i am trying to search for the Users based on thier Job Nature.
Thank you for all the Support Guys, you both "Celvin" and "John" are the Top Guys under my Search list for any technical Assistance.
Thank you once again Friends....
Regards,
Sunil...
Shantan....

Error while configuring channels in B2B 11g

Similar Messages

Maybe you are looking for