Error while creating datasource userdsn for oracle 10g Errorcode (998)

while creating datasource userdsn for oracle 10g i am getting error "The setup routines for the oracle in OraDb10g_home1 odbc driver could not be loaded due to system error code 998" please give reply soon

Thanks for your reply , Steve.
I noticed that there is a default datasouce on the EM with the following parameters:
<data-source
          class="com.evermind.sql.DriverManagerDataSource"
          name="OracleDS"
          location="jdbc/OracleCoreDS"
          xa-location="jdbc/xa/OracleXADS"
          ejb-location="jdbc/OracleDS"
          connection-driver="oracle.jdbc.driver.OracleDriver"
          username="scott"
          password="->pwForScott"
          url="jdbc:oracle:thin:@localhost:1521:oracle"
          inactivity-timeout="30"
     />
The location and xa-location attributes that I use for my "test" data source are the same as the default one. So, could this be the issue?
What should be the values for location and xa-location attributes from my "test" data source?
Any help will be greatly appreciated.
Thanks,
Shyam

Similar Messages

"Error while accessing porting layer for ORACLE database via getSessionId()

Hi,
My ejb3.0 Entity is created from Emp table in scott/tiger schema of an Oracle 10g database. I am guessing I made some mistake creating the datasource or uploading the driver, because when I run my application, I get a long exception stack trace. The bottom-most entry in the stack trace is:
Caused by: com.sap.sql.log.OpenSQLException: Error while accessing porting layer for ORACLE database via getSessionId().
     at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:148)
     at com.sap.sql.jdbc.direct.DirectConnectionFactory.createPooledConnection(DirectConnectionFactory.java:527)
     at com.sap.sql.jdbc.direct.DirectConnectionFactory.createDirectPooledConnection(DirectConnectionFactory.java:158)
     at com.sap.sql.jdbc.direct.DirectConnectionFactory.createDirectPooledConnection(DirectConnectionFactory.java:118)
     at com.sap.sql.connect.factory.PooledConnectionFactory.createPooledConnection(PooledConnectionFactory.java:119)
     at com.sap.sql.connect.factory.DriverPooledConnectionFactory.getPooledConnection(DriverPooledConnectionFactory.java:38)
     at com.sap.sql.connect.datasource.DBDataSourceImpl.createPooledConnection(DBDataSourceImpl.java:685)
     at com.sap.sql.connect.datasource.DBDataSourcePoolImpl.matchPool(DBDataSourcePoolImpl.java:1081)
     at com.sap.sql.connect.datasource.DBDataSourcePoolImpl.matchPooledConnection(DBDataSourcePoolImpl.java:919)
     at com.sap.sql.connect.datasource.DBDataSourcePoolImpl.getConnection(DBDataSourcePoolImpl.java:67)
     at com.sap.engine.core.database.impl.DatabaseDataSourceImpl.getConnection(DatabaseDataSourceImpl.java:36)
     at com.sap.engine.services.dbpool.spi.ManagedConnectionFactoryImpl.createManagedConnection(ManagedConnectionFactoryImpl.java:123)
     ... 90 more

Actually, now (after the GRANT described in my reply before) the Exception has changed to:
Caused by: com.sap.sql.log.OpenSQLException: Error while
accessing porting layer for ORACLE database via
<b>getDatabaseHost</b>().
     at com.sap.sql.log.Syslog.createAndLogOpenSQLException
(Syslog.java:148)
     at com.sap.sql.jdbc.direct.DirectConnectionFactory.
createPooledConnection(DirectConnectionFactory.java:527)
     at com.sap.sql.jdbc.direct.DirectConnectionFactory.
createDirectPooledConnection(DirectConnectionFactory.java:158)
     at com.sap.sql.jdbc.direct.DirectConnectionFactory.
createDirectPooledConnection(DirectConnectionFactory.java:118)
     at com.sap.sql.connect.factory.PooledConnectionFactory.
createPooledConnection(PooledConnectionFactory.java:119)
     at com.sap.sql.connect.factory.DriverPooledConnectionFactory.
getPooledConnection(DriverPooledConnectionFactory.java:38)
     at com.sap.sql.connect.datasource.DBDataSourceImpl.
createPooledConnection(DBDataSourceImpl.java:685)
     at com.sap.sql.connect.datasource.DBDataSourcePoolImpl.
matchPool(DBDataSourcePoolImpl.java:1081)
     at com.sap.sql.connect.datasource.DBDataSourcePoolImpl.
matchPooledConnection(DBDataSourcePoolImpl.java:919)
     at com.sap.sql.connect.datasource.DBDataSourcePoolImpl.
getConnection(DBDataSourcePoolImpl.java:67)
     at com.sap.engine.core.database.impl.DatabaseDataSourceImpl.
getConnection(DatabaseDataSourceImpl.java:36)
     at com.sap.engine.services.dbpool.spi.
ManagedConnectionFactoryImpl.createManagedConnection(ManagedConnectionFactoryImpl.java:123)
     ... 90 more

Error while creating a task for creating an generic task /app/dac/CustomSQ

Hi ,
I have created a sql file in DAC server /app/dac/CustomSQLs/ ,just to fire an update sql in database
In DAC task tab i have created a task with the following:
Command for incremental load :/app/dac/CustomSQLs/DBNameBeforeLoad.sql
Primary source :flatfileconnection
target source:DBCONNECTION_OLAP
Execution type:SQL FILE
Task phase:GENERAL
I created subject area and assembled ,then created a Execution plan.
When i try to execute this EP ,it shows the following error in DAC log:
ANOMALY INFO::: Error while creating a task for creating an generic task /app/dac/CustomSQLs/DBNameBeforeLoad.sql
MESSAGE:::/app/dac/CustomSQLs/DBNameBeforeLoad.sql - invalide template name!
EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.TaskInitializationException
com.siebel.analytics.etl.etltask.SQLFileTask.doInit(SQLFileTask.java:69)
com.siebel.analytics.etl.etltask.GenericTaskImpl.init(GenericTaskImpl.java:194)
Does my above configuration is correct ..?

verify the following settings:
1. mapping of ECC plant and storage location and logical system number with the appropriate availability group code since this links the stock types in EWM to ECC org elements (SPRO -> EWM -> Interfaces -> ERP Integration -> Goods movement)
2. ensure the availability group configuration is correct (SPRO -> EWM -> GR Process -> Configure availability group for putaway) - check all applicable nodes in this configuration since the availability group code is assigned in the pertinent storage types

T4CConnection Error while creating datasource in SOA 11g

Hi All,
i getting the below error while creating the data source with an oracle database in oracle SOA 11g. I trying to create the datasource in the weblogic console page. The error is specifically coming while testing the database connection.
However, i am able to telnet the database box on this particular port.. Also this used to be a working connection earlier and i am able to create the same datasource from other similar SOA 11g instance...
the error details are:-
java.sql.SQLRecoverableException: IO Error: Connection reset
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:428)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:538)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:228)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:521)
at java.sql.DriverManager.getConnection(DriverManager.java:582)
at java.sql.DriverManager.getConnection(DriverManager.java:154)
at utils.dbping.main(dbping.java:204)
Caused by: java.net.SocketException: Connection reset
at java.net.SocketInputStream.read(SocketInputStream.java:168)
at oracle.net.ns.Packet.receive(Packet.java:293)
at oracle.net.ns.DataPacket.receive(DataPacket.java:104)
at oracle.net.ns.NetInputStream.getNextPacket(NetInputStream.java:315)
at oracle.net.ns.NetInputStream.read(NetInputStream.java:260)
at oracle.net.ns.NetInputStream.read(NetInputStream.java:185)
at oracle.net.ns.NetInputStream.read(NetInputStream.java:102)
at oracle.jdbc.driver.T4CSocketInputStreamWrapper.readNextPacket(T4CSocketInputStreamWrapper.java:124)
at oracle.jdbc.driver.T4CSocketInputStreamWrapper.read(T4CSocketInputStreamWrapper.java:80)
at oracle.jdbc.driver.T4CMAREngine.unmarshalUB1(T4CMAREngine.java:1136)
at oracle.jdbc.driver.T4CMAREngine.unmarshalSB1(T4CMAREngine.java:1113)
at oracle.jdbc.driver.T4C8TTIdty.receive(T4C8TTIdty.java:668)
at oracle.jdbc.driver.T4C8TTIdty.doRPC(T4C8TTIdty.java:575)
at oracle.jdbc.driver.T4CConnection.connect(T4CConnection.java:1120)
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:308)
please let me know in case any of you know the fix..

i also used the weblogic jar to do a db ping.. and it errored out with the above error. however if i db ping from any other app server it works... below is the success response from another server and the command used..
[applmgr@g3te2soa lib]$ java -classpath /u01/app/Middleware/wlserver_10.3/server/lib/weblogic.jar utils.dbping ORACLE_THIN apps appsuat abc1.xyz.net:1525:oru1
**** Success!!! ****
You can connect to the database in your app using:
java.util.Properties props = new java.util.Properties();
props.put("user", "apps");
props.put("password", "appsuat");
java.sql.Driver d =
Class.forName("oracle.jdbc.OracleDriver").newInstance();
java.sql.Connection conn =
Driver.connect("jdbc:oracle:thin:@abc1.xyz.net:1525:oru1", props);
is it some netwrok issue.. but why is then the telnet working for the same server on this port ????

Error while creating datasource

I am getting this error while creating the datasource on console of html page.
java.lang.NullPointerException
     at weblogic.management.console.utils.MBeans.getMBeanClassNameFor(MBeans.java:1153)
     at weblogic.management.console.actions.mbean.EditMBeanAction.getMBeanClass(EditMBeanAction.java:210)
     at weblogic.management.console.actions.mbean.EditMBeanAction.getDialogTypeKey(EditMBeanAction.java:188)
     at weblogic.management.console.actions.internal.InternalActionContext.setAction(InternalActionContext.java:158)
     at weblogic.management.console.actions.internal.ActionServlet.doAction(ActionServlet.java:170)
     at weblogic.management.console.actions.internal.ActionServlet.doPost(ActionServlet.java:85)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:945)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:332)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:242)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:5360)
     at weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManager.java:721)
     at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3043)
     at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2468)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:152)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:133)

well thankx for the inputs. well but te screen dosent move from tht point. as we enter a datasource name, it gives this error. and we havent logged into anywhr to give the access credentials.
am wondering how then whts the point in knowing the username and pwd if i give edit datasource .
thankx

Error while creating new user in Oracle 11i EBS

I am getting following error while creating new user. How solve this issue?
“Unable to load java class % specified profile option SIGNON_PASSWORD_CUSTOM. Please verify that the class exists and that it implements the java interface oracle.apps.fnd.security.PasswordValidation”.

Following is the text from Note for Custom Password Validation logic:
Customers who wish to use their own password validation logic may do
so by writing their own Java classes that implement the
oracle.apps.fnd.security.PasswordValidation Java interface. The
interface requires 3 methods to be implemented:
1) public boolean validate(String user, String password)
    - This method takes a username and password, and then returns true
or false, indicating whether the user's password is valid or invalid,
respectively.
2) public String getErrorStackMessageName()
    - This method returns the name of the message to display when the
user's password is deemed invalid (i.e., the validate() method returns
false).
3) public String getErrorStackApplicationName()
    - This method returns the application shortname for the
aforementioned error message.
After writing the Java class to perform customized password
validation, the customer must then set the value of the profile option
SIGNON_PASSWORD_CUSTOM to be the full name of the class. If, for
example, the name of the Java class is
oracle.apps.fnd.security.AppsPasswordValidation, then the value of the
SIGNON_PASSWORD_CUSTOM profile option must be
oracle.apps.fnd.security.AppsPasswordValidation. Note that AOL/J
will attempt to load this class dynamically. Hence it is necessary to
make the class accessible by AOL/J. This means that in Forms, the
class must first be loaded into the database using the loadjava
command.
You will need to apply the following patches for 11.5.1:
   1344802
   1363919
   1472974
   1351004
   1377615
You will need to apply the following patches for 11.5.2:
   1377615

Error while creating datasource from table MBEWH

Hi all,
I am facing an error message while creating datasource from table MBEWH
"Invalid extract structure template MBEWH of DataSource "; This operation failed, because the template structure quantity fields or currency fields, for example, field LBKUM refer to a different table.
Can anyone help me that why system is not allowing me to generate generic datasource for table MBEWH to transfer my month wise inventory data.
thanks and regards.

Hi Zakir,
      This was comming for classification data... when ever you want to extract some classification related data then we can't create generic datasources directly.. for that you need to go with CTBW ( tcode ) and   create one datasource...
   so, you need to check that   related table also.. for that MBEWH table..
    ALL THE CLASSIFICATION RELATED DATASOURCES WE CAN'T CREATE DIRECTLY... JUST LIKE AUSP table also.. liek this..
regards
@jay

Gating error while creating standby database in oracle 11g

Dear Gurus
I am getting following error while creating standby database. My database version is oracle 11g 11.2.0.1 in Redhat 5.2
RMAN> duplicate target database for standby from active database;
Starting Duplicate Db at 10-MAY-12
using channel ORA_AUX_DISK_1
contents of Memory Script:
backup as copy reuse
targetfile '/oracle/product/11.2.0/dbhome_1/dbs/orapworcl' auxiliary format
'/oracle/product/11.2.0/dbhome_1/dbs/orapwstdb' ;
executing Memory Script
Starting backup at 10-MAY-12
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 05/10/2012 15:44:18
RMAN-03015: error occurred in stored script Memory Script
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 05/10/2012 15:44:18
ORA-17629: Cannot connect to the remote database server
ORA-17627: ORA-12528: TNS:listener: all appropriate instances are blocking new connections
ORA-17629: Cannot connect to the remote database server
RMAN>
Regards
Rabi

Hello;
Generally for the connection to work you need to add something like this to the listener.ora file :
(SID_DESC =
    (global_dbname = STANDBY.hostname)
    (ORACLE_HOME = /u01/app/oracle/product/11.2.0.2)
    (sid_name = STANDBY)
)You should stop and start the listener on the Standby after adding this. Also your tnsnames.ora must be correct on both the primary and the Standby.
Also you need an INIT for the Standby side :
STANDBY.__db_cache_size=343932928
STANDBY.__java_pool_size=4194304
STANDBY.__large_pool_size=4194304
STANDBY.__oracle_base='/u01/app/oracle'#ORACLE_BASE set from environment
STANDBY.__pga_aggregate_target=281018368
STANDBY.__sga_target=834666496
STANDBY.__shared_io_pool_size=0
STANDBY.__shared_pool_size=469762048
STANDBY.__streams_pool_size=0
audit_file_dest='/u01/app/oracle/admin/PRIMARY/adump'
audit_trail='db'
compatible='11.2.0.0.0'
control_files='/u01/app/oracle/oradata/PRIMARY/control01.ctl','/u01/app/oracle/oradata/PRIMARY/control02.ctl'
db_block_size=8192
db_domain='SOME.DOMAIN.COM'
db_flashback_retention_target=2880
db_name='PRIMARY'
db_recovery_file_dest_size=2147483648
db_recovery_file_dest='/u01/app/oracle/flash_recovery_area'
diagnostic_dest='/u01/app/oracle'
dispatchers='(PROTOCOL=TCP) (SERVICE=PRIMARYXDB)'
log_archive_dest_1='LOCATION=USE_DB_RECOVERY_FILE_DEST'
open_cursors=300
pga_aggregate_target=277872640
processes=150
remote_login_passwordfile='EXCLUSIVE'
sga_target=833617920
undo_tablespace='UNDOTBS1'
log_archive_dest_1='LOCATION=USE_DB_RECOVERY_FILE_DEST VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=STANDBY'
log_archive_dest_2='SERVICE=PRIMARY LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) '
LOG_ARCHIVE_DEST_STATE_1=ENABLE
LOG_ARCHIVE_DEST_STATE_2=DEFER
LOG_ARCHIVE_MAX_PROCESSES=30
FAL_SERVER=STANDBY
STANDBY_FILE_MANAGEMENT=AUTO
DB_UNIQUE_NAME=STANDBYFinally
startup nomount
Start RMAN and issue duplicate command
$ORACLE_HOME/bin/rman target=sys/@primary auxiliary=sys/@standby
RMAN>duplicate target database for standby from active database NOFILENAMECHECK;
Keys to success
1. New Standby start NOMOUNT on new password file. ( On Oracle 11 you must copy and rename the file from Primary server )
2. Hard coded listener on new Standby server.
3. Correct tnsnames.ora files.
4. Correct duplicate command.
Please consider closing some of you old answered questions
Best Regards
mseberg
Edited by: mseberg on May 10, 2012 7:06 AM

Error while Creating a formula for field AZNOR (T-Code : OP17)

Dear Experts,
i am facing a problem in Transaction OP17 while creating a formula for field AZNOR ( No of indivual capacity in work center) in work center (T-Code : CR02) .
It shows the error
The data object "F" has no component called "AZNOR''..
Please let me know the solution..
Thanks & Regards
Birendra Kumar

Hi,
I have the same problem.
Could You tell me witch is the correct origin?
Thanks a lot!
Bye
Laura

Error while creating datasource from view ZBSIS_VIEW

Hi all,
I could not create the datasource on the database table BSIS as it said "Invalid extract structure template BSIS of Datasource". I had suggestions that I should create a view and then create the Datasource on it. So I created the view and tried. But still I am facing an error message while creating datasource from custom Database View ZBSIS_VIEW.
"Invalid extract structure template ZBSIS_VIEW of DataSource"
Can anyone help on this regard.
thanks.

Hi,
Yes. You need a create a view on tables BSIS, BKPF and T001 as the currency/quantity fields in BSIS have reference fields from the other 2 tables.
In BSIS, in the currency/quantity fields tab, you have some ref tables and fields. You would need to include these tables and join in the view. You would also need to include the ref fields like WAERS, HWAE2, HWAE3, etc in the view. Then you would be able to create the datasource.

Error while creating logical port for Consumer Proxy in SOAMANGER

Hi,
While creating logical port for my consumer proxy in SOAMANGER, I am getting the error shown below
SRT Framework exception: HTTP: Current user does not have the required authorization to access the HTTP destination
I have searched in the forums but none of the answers helped me.
I have specifed my PI user ID and password and the user has the followwing roles assigned to it.
SAP_BC_WEBSERVICE_SERVICE_USER
SAP_BC_WEBSERVICE_ADMIN_TEC
SAP_BC_WEBSERVICE_CONSUMER
SAP_BC_WEBSERVICE_ADMIN
Current user in the error message refers to the PI user that i have specified or the user with which i have logged in the backend ABAP system?
Please help me reslove this issue.
Thanks and regards
Sreehari Nambiar

Hi,
Please add the following roles as well.
SAP_BC_WEBSERVICE_ADMIN_BIZ
SAP_BC_WEBSERVICE_DEBUGGER
SAP_BC_WEBSERVICE_OBSERVER
Also make sure that you are doing the role comparison after adding all SAP* roles in your profile.
Let me know if this works?
Thanks,
Sridhar

Getting the following error while creating the model for webdynpro app.

Plugin Name: Web Dynpro Model Editor Services
Plugin ID : com.sap.ide.webdynpro.service.modeleditor
Class :ap.ide.webdynpro.modeleditor.wizards.model. creation.ModelDialog
Method : nextPressed
Exception : org.eclipse.swt.SWTException: Failed to execute runnable (java.lang.NoClassDefFoundError)
This is the error i am getting while creating the model for the webdynpro application. Can some one help ?
Thanks & Regards
Lalith

hi
This error occurs mainly due to the reason that particular plugin is not there in the NWDS.
So please try to reinstall the NWDS or try tracing out whether that particular plugin is there or not.
Thank,
kris

Error while creating Ear File for project Containing (WAR+MAR) in jdev

hi,
I am trying to deploy my adf application containing MDS customization.While creating EAR from application properties--->deploy--->deploye to EAR i am getting following error.
Wrote MAR file to C:\JDeveloper\mywork\MDSApp\deploy\AutoGeneratedMar.mar
[04:40:07 PM] Wrote Web Application Module to C:\JDeveloper\mywork\MDSApp\ViewController\deploy\MDSApp_ViewController_webapp1.war
*[04:40:07 PM] Warning: Some of the customization documents under '/' are packaged as part of WAR. This metadata cannot be accessed from WAR using MDS.*
*[04:40:07 PM] Info: Namespace '/xliffbundles' is mapped to deploy-target metadata-store-usage 'MAR_TargetRepos' in adf-config.xml but no metadata from the namespace is included in the MAR*.
[04:40:07 PM] Wrote Enterprise Application Module to C:\JDeveloper\mywork\MDSApp\deploy\MDSApp_application1.ear
[04:40:07 PM] Elapsed time for deployment: 4 seconds
[04:40:07 PM] ---- Deployment finished. ----
my adf-config.xml is as below
<?xml version="1.0" encoding="windows-1252" ?>
<adf-config xmlns="http://xmlns.oracle.com/adf/config"
xmlns:adf="http://xmlns.oracle.com/adf/config/properties"
xmlns:sec="http://xmlns.oracle.com/adf/security/config">
<adf:adf-properties-child xmlns="http://xmlns.oracle.com/adf/config/properties">
<adf-property name="adfAppUID" value="MDSApp-3718"/>
</adf:adf-properties-child>
<sec:adf-security-child xmlns="http://xmlns.oracle.com/adf/security/config">
<CredentialStoreContext credentialStoreClass="oracle.adf.share.security.providers.jps.CSFCredentialStore"
credentialStoreLocation="../../src/META-INF/jps-config.xml"/>
<sec:JaasSecurityContext initialContextFactoryClass="oracle.adf.share.security.JAASInitialContextFactory"
jaasProviderClass="oracle.adf.share.security.providers.jps.JpsSecurityContext"
authorizationEnforce="true"
authenticationRequire="true"/>
</sec:adf-security-child>
<adf-mds-config xmlns="http://xmlns.oracle.com/adf/mds/config">
<mds-config xmlns="http://xmlns.oracle.com/mds/config" version="11.1.1.000">
<cust-config>
<match path="/">
<customization-class name="oracle.model.mycompany.SiteCC"/>
<customization-class name="oracle.adf.share.config.UserCC"/>
</match>
</cust-config>
<persistence-config>
<metadata-namespaces>
<namespace path="/xliffbundles" metadata-store-usage="MAR_TargetRepos"/>
</metadata-namespaces>
<metadata-store-usages >
<metadata-store-usage id="MAR_TargetRepos" deploy-target="true">
<metadata-store class-name="oracle.mds.persistence.stores.db.DBMetadataStore">
<property name="jndi-datasource" value="jdbc/mds/DEV_MDS"/>
<property name="partition-name" value="part1"/>
</metadata-store>
</metadata-store-usage>
</metadata-store-usages>
</persistence-config>
</mds-config>
</adf-mds-config>
<adf-faces-config xmlns="http://xmlns.oracle.com/adf/faces/config">
<taglib-config>
<taglib uri="http://xmlns.oracle.com/adf/faces/rich">
<tag name="column">
<attribute name="displayIndex">
<persist-changes>true</persist-changes>
</attribute>
<attribute name="frozen">
<persist-changes>true</persist-changes>
</attribute>
<attribute name="noWrap">
<persist-changes>true</persist-changes>
</attribute>
<attribute name="selected">
<persist-changes>true</persist-changes>
</attribute>
<attribute name="visible">
<persist-changes>true</persist-changes>
</attribute>
<attribute name="width">
<persist-changes>true</persist-changes>
</attribute>
</tag>
<tag name="showDetailHeader">
<attribute name="disclosed">
<persist-changes>true</persist-changes>
</attribute>
</tag>
<tag name="panelSplitter">
<attribute name="collapsed">
<persist-changes>true</persist-changes>
</attribute>
<attribute name="splitterPosition">
<persist-changes>true</persist-changes>
</attribute>
</tag>
</taglib>
</taglib-config>
<persistent-change-manager>
<persistent-change-manager-class>oracle.adf.view.rich.change.MDSDocumentChangeManager</persistent-change-manager-class>
</persistent-change-manager>
</adf-faces-config>
</adf-config>

hi frank,
If you have any idea plz reply...We r stucked with metadat-namespace path attribute.

Error While Querying DB Link from Oracle 10g to Postgres 8.2

Hi,
I have installed unixodbc 2.3.1, postgres odbc driver (psqlodbc-07.03) and dg4odbc 11.2
On querying : select sysdate from dual@dblink_postgresql, the following error occurs:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[unixODBC][Driver Manager]Can't open lib '/oracle/psqlodbc/lib/libpsqlodbc.a' : file not found {01000}
ORA-02063: preceding 2 lines from DBLINK_POSTGRES
Similar error appears in the trace file as well.
[unixODBC][Driver Manager]Can't open lib '/oracle/psqlodbc/lib/libpsqlodbc.a'
$ isql -v postgresql postgres postgres@2012
[01000][unixODBC][Driver Manager]Can't open lib '/oracle/psqlodbc/lib/libpsqlodbc.a' : file not found
[ISQL]ERROR: Could not SQLConnect
However the file is present in the location and has no permission related problems.
$ pwd
/oracle/psqlodbc/lib
$ ls -lrt
total 2952
-rwxr-xr-x 1 oracle oinstall 663 Mar 25 15:28 psqlodbc.la
-rw-r--r-- 1 oracle oinstall 731419 Mar 25 15:28 libpsqlodbc.a
-rw-r--r-- 1 oracle oinstall 12215 Mar 25 22:11 win_md5.o
-rw-r--r-- 1 oracle oinstall 18100 Mar 25 22:11 options.o
-rw-r--r-- 1 oracle oinstall 13196 Mar 25 22:11 misc.o
-rw-r--r-- 1 oracle oinstall 4234 Mar 25 22:11 lobj.o
-rw-r--r-- 1 oracle oinstall 122442 Mar 25 22:11 info.o
-rw-r--r-- 1 oracle oinstall 26464 Mar 25 22:11 execute.o
-rw-r--r-- 1 oracle oinstall 22070 Mar 25 22:11 environ.o
-rw-r--r-- 1 oracle oinstall 8633 Mar 25 22:11 drvconn.o
-rw-r--r-- 1 oracle oinstall 83758 Mar 25 22:11 convert.o
-rw-r--r-- 1 oracle oinstall 62529 Mar 25 22:11 connection.o
-rw-r--r-- 1 oracle oinstall 5685 Mar 25 22:11 columninfo.o
-rw-r--r-- 1 oracle oinstall 19724 Mar 25 22:11 bind.o
-rw-r--r-- 1 oracle oinstall 3768 Mar 25 22:11 tuplelist.o
-rw-r--r-- 1 oracle oinstall 2816 Mar 25 22:11 tuple.o
-rw-r--r-- 1 oracle oinstall 36770 Mar 25 22:11 statement.o
-rw-r--r-- 1 oracle oinstall 10490 Mar 25 22:11 socket.o
-rw-r--r-- 1 oracle oinstall 74140 Mar 25 22:11 results.o
-rw-r--r-- 1 oracle oinstall 22686 Mar 25 22:11 qresult.o
-rw-r--r-- 1 oracle oinstall 1977 Mar 25 22:11 psqlodbc.o
-rw-r--r-- 1 oracle oinstall 25893 Mar 25 22:11 pgtypes.o
-rw-r--r-- 1 oracle oinstall 706 Mar 25 22:11 pgapi30.o
-rw-r--r-- 1 oracle oinstall 34071 Mar 25 22:11 parse.o
-rw-r--r-- 1 oracle oinstall 706 Mar 25 22:11 odbcapi30.o
-rw-r--r-- 1 oracle oinstall 41540 Mar 25 22:11 odbcapi.o
-rw-r--r-- 1 oracle oinstall 11601 Mar 25 22:11 multibyte.o
-rw-r--r-- 1 oracle oinstall 706 Mar 25 22:11 info30.o
-rw-r--r-- 1 oracle oinstall 5972 Mar 25 22:11 gpps.o
-rw-r--r-- 1 oracle oinstall 37546 Mar 25 22:11 dlg_specific.o
My odbc.ini and init4dg4odbc looks like below:
$ pg odbc.ini
[postgresql]
Description = Test to Postgres
Driver = /oracle/psqlodbc/lib/libpsqlodbc.a
Trace = Yes
TraceFile = postgres.log
Database = postgres
Servername = TCLDSAPORTUAT
UserName = postgres
Password = postgres@2012
Port = 5432
Protocol = TCP
ReadOnly = Yes
RowVersioning = No
ShowSystemTables = No
ShowOidColumn = No
FakeOidIndex = No
$ pg initdg4odbc.ora
# This is a sample agent init file that contains the HS parameters that are
# needed for the Database Gateway for ODBC
# HS init parameters
HS_FDS_CONNECT_INFO = postgresql
HS_FDS_TRACE_LEVEL = DEBUG
HS_FDS_SHAREABLE_NAME = /oracle/unixodbc64/lib/libodbc.so
# ODBC specific environment variables
set ODBCINI=/oracle/unixodbc64/etc/odbc.ini
# Environment variables required for the non-Oracle system
#set <envvar>=<value>
I found similar threads in the forum but could not find solution for this problem.
Please help to resolve this issue.
Thanks,
Akanksha
Edited by: 996208 on Mar 26, 2013 5:35 AM

Hi Mike,
I used the truss option for diagnosis, the output is really long and shows the same error at the end of execution:
$truss isql -v postgresql postgres postgres@2012
getuidx(4) = 207
getuidx(2) = 207
getuidx(1) = 207
getgidx(4) = 203
getgidx(2) = 203
getgidx(1) = 203
kload("/usr/lib/nls/loc/en_US__64", 17301632, "/oracle/unixodbc64/lib") = 648518346072918576
getuidx(4) = 207
getuidx(2) = 207
getuidx(1) = 207
getgidx(4) = 203
getgidx(2) = 203
getgidx(1) = 203
kload("/usr/lib/nls/loc/en_US__64", 17301632, "/oracle/unixodbc64/lib") = 648518346072918576
access("/usr/lib/nls/msg/en_US/execerr.cat", 0) = 0
_getpid()                                       = 27262980
kopen("/usr/lib/nls/msg/en_US/execerr.cat", O_RDONLY) = 3
kioctl(3, 22528, 0x0000000000000000, 0x0000000000000000) Err#25 ENOTTY
kfcntl(3, F_SETFD, 0x0000000000000001) = 0
kioctl(3, 22528, 0x0000000000000000, 0x0000000000000000) Err#25 ENOTTY
kread(3, "\0\001 ù\001\001 I S O 8".., 4096) = 4096
lseek(3, 0, 1) = 4096
lseek(3, 0, 1) = 4096
lseek(3, 0, 1) = 4096
_getpid()                                       = 27262980
lseek(3, 0, 1) = 4096
_getpid()                                       = 27262980
lseek(3, 0, 1) = 4096
_getpid()                                       = 27262980
lseek(3, 0, 1) = 4096
lseek(3, 4639, 0) = 4639
kread(3, "\t 0 5 0 9 - 1 9 4 E x".., 4096) = 1686
getuidx(4) = 207
getuidx(2) = 207
getuidx(1) = 207
getgidx(4) = 203
getgidx(2) = 203
getgidx(1) = 203
kload("/usr/lib/nls/loc/en_US__64", 17301632, "/oracle/unixodbc64/lib") = 648518346072918576
getuidx(4) = 207
getuidx(2) = 207
getuidx(1) = 207
getgidx(4) = 203
getgidx(2) = 203
getgidx(1) = 203
kload("/usr/lib/nls/loc/en_US__64", 17301632, "/oracle/unixodbc64/lib") = 648518346072918576
getuidx(4) = 207
getuidx(2) = 207
getuidx(1) = 207
getgidx(4) = 203
getgidx(2) = 203
getgidx(1) = 203
kload("/usr/lib/nls/loc/en_US__64", 17301632, "/oracle/unixodbc64/lib") = 648518346072918576
getuidx(4) = 207
getuidx(2) = 207
getuidx(1) = 207
getgidx(4) = 203
getgidx(2) = 203
getgidx(1) = 203
kload("/usr/lib/nls/loc/en_US__64", 17301632, "/oracle/unixodbc64/lib") = 648518346072918576
getuidx(4) = 207
getuidx(2) = 207
getuidx(1) = 207
getgidx(4) = 203
getgidx(2) = 203
getgidx(1) = 203
kload("/usr/lib/nls/loc/en_US__64", 17301632, "/oracle/unixodbc64/lib") = 648518346072918576
getuidx(4) = 207
getuidx(2) = 207
getuidx(1) = 207
getgidx(4) = 203
getgidx(2) = 203
getgidx(1) = 203
kload("/usr/lib/nls/loc/en_US__64", 17301632, "/oracle/unixodbc64/lib") = 648518346072918576
kioctl(1, 22528, 0x0000000000000000, 0x0000000000000000) = 0
[01000][unixODBC][Driver Manager]Can't open lib '/oracle/psqlodbc/lib/psqlodbc.o' : file not found
kwrite(1, " [ 0 1 0 0 0 ] [ u n i x".., 99)     = 99
[ISQL]ERROR: Could not SQLConnect
kwrite(2, " [ I S Q L ] E R R O R :".., 34) = 34
kfcntl(1, F_GETFL, 0x0000000010DF0051) = 67110914
kfcntl(2, F_GETFL, 0x0000000010DF0051) = 67110914
_exit(1)
Do I need to install postgres software also?
While installing postgres odbc driver in /oracle/psqlodbc only two folders were created viz. lib and share
In lib folder two files were created viz. psqlodbc.la and libpsqlodbc.a
And everybody on the net seems to refer psqlodbc.so in the "Driver = " parameter
Today, I extracted the libpsqlodbc.a by using ar -X 64 -xv libpsqlodbc.a again, still no file with .so has been created.
$ ls -lrt
total 2952
-rwxr-xr-x 1 oracle oinstall 663 Mar 25 15:28 psqlodbc.la
-rwxr-xr-x 1 oracle oinstall 731419 Mar 28 13:51 libpsqlodbc.a
-rw-r--r-- 1 oracle oinstall 12215 Apr 01 13:50 win_md5.o
-rw-r--r-- 1 oracle oinstall 3768 Apr 01 13:50 tuplelist.o
-rw-r--r-- 1 oracle oinstall 2816 Apr 01 13:50 tuple.o
-rw-r--r-- 1 oracle oinstall 36770 Apr 01 13:50 statement.o
-rw-r--r-- 1 oracle oinstall 10490 Apr 01 13:50 socket.o
-rw-r--r-- 1 oracle oinstall 74140 Apr 01 13:50 results.o
-rw-r--r-- 1 oracle oinstall 22686 Apr 01 13:50 qresult.o
-rw-r--r-- 1 oracle oinstall 1977 Apr 01 13:50 psqlodbc.o
-rw-r--r-- 1 oracle oinstall 25893 Apr 01 13:50 pgtypes.o
-rw-r--r-- 1 oracle oinstall 706 Apr 01 13:50 pgapi30.o
-rw-r--r-- 1 oracle oinstall 34071 Apr 01 13:50 parse.o
-rw-r--r-- 1 oracle oinstall 18100 Apr 01 13:50 options.o
-rw-r--r-- 1 oracle oinstall 706 Apr 01 13:50 odbcapi30.o
-rw-r--r-- 1 oracle oinstall 41540 Apr 01 13:50 odbcapi.o
-rw-r--r-- 1 oracle oinstall 11601 Apr 01 13:50 multibyte.o
-rw-r--r-- 1 oracle oinstall 13196 Apr 01 13:50 misc.o
-rw-r--r-- 1 oracle oinstall 4234 Apr 01 13:50 lobj.o
-rw-r--r-- 1 oracle oinstall 706 Apr 01 13:50 info30.o
-rw-r--r-- 1 oracle oinstall 122442 Apr 01 13:50 info.o
-rw-r--r-- 1 oracle oinstall 5972 Apr 01 13:50 gpps.o
-rw-r--r-- 1 oracle oinstall 26464 Apr 01 13:50 execute.o
-rw-r--r-- 1 oracle oinstall 22070 Apr 01 13:50 environ.o
-rw-r--r-- 1 oracle oinstall 8633 Apr 01 13:50 drvconn.o
-rw-r--r-- 1 oracle oinstall 37546 Apr 01 13:50 dlg_specific.o
-rw-r--r-- 1 oracle oinstall 83758 Apr 01 13:50 convert.o
-rw-r--r-- 1 oracle oinstall 62529 Apr 01 13:50 connection.o
-rw-r--r-- 1 oracle oinstall 5685 Apr 01 13:50 columninfo.o
-rw-r--r-- 1 oracle oinstall 19724 Apr 01 13:50 bind.o
Thanks,
Akanksha

Error while creating standby database for ebs prod database

Hi,
We are getting error while trying to create a standby database for EBS database by using RMAN DUPLICATE commands,
Steps followed:
1.) Backup the primary database (Ebs PROD db). This was done on 12-Mar-2012
***RMAN backups are scheduled to run @10:00 pm every night. Flash Recovery Area has been configured and backup is taken at this location
everyday.
2.) Tar the backupset, autobackup, archivelogs etc in FRA .... and copy this to the target server (STANDBY).
*** Copy(oracle rdbms binaries and FRA) completed @12:00AM on 14-Mar-2012
3.) Tried to create standby database by using RMAN duplicate on 14-Mar-2012
RMAN> rman sys/sys@PROD auxiliary /
RMAN> duplicate target database for standby dorecover nofilenamecheck;
After, some time the RMAN DUPLICATE process errors out with,
ORA-19563: header validation failed for file
We are not sure about the cause of this error. While searching in Metalink, we got several notes (ex, 352074.1) but all the causes stated for this error
are not applicable in our case. We double checked our instance to confirm this.
We have also found that in PROD database there are 65 datafiles and after the RMAN DUPLICATE errors out in the targer server (STANDBY) the RMAN managed to restore 51 datafiles before erroring out.
# Please note PROD database was also backed up on 13-Mar-2012. We have a suspicion that backup on 13-Mar may be a possible cause for this error but we are
not sure.
Need suggestions if there can be any other possible causes???
We are in a fix and it would be appreciable if we get some quick suggestions..
Regards,
Rupdipt
Edited by: orarup on Mar 14, 2012 12:29 AM

When opening the file to be placed in a copy or backup set, to be inspected, or used as the target for an incremental restore, its header was not recognized as a valid file header for a file of the indicated type (data file, archived log, or control file) belonging to the current database.
Kindly Ensure that the correct files are being specified for the copy or backup operation.
Regs,
Bhavi Savla.

Error while creating datasource userdsn for oracle 10g Errorcode (998)

Similar Messages

Maybe you are looking for