Error While Creating Grant Master

Hi,
I am getting the error while creating the Grant Master.Kindly Help me
The Error Messages:
The special grant NOT RELEVANT (dummy grant) is automatically created(Message no. GMMASTERDATA111)     
Cannot get grant defaults for sponsor 0000600000(Message no. GMMASTERDATA037)
Sponsor 0000600000 does not permit grant type 01(Message no. GMMASTERDATA036)
Duplicate grant number (Message no. GMMASTERDATA031)
Thanks
Kishore

Hi
go to OMWD : group together Valuation area like Plant and Company code.
Also Check OMS2 to update qty and value at plant level
check Enterprise assignment has been done properly..
hope that helps ..
thanks
mk

Similar Messages

  • Runtime error while creating material master data

    hello sir,
    i am facing one prolem while creating MATERIAL MASTER DATA.
    AFTER GIVING ALL REQUIRED INFORMATION WHEN I AM GOING TO SAVE THE DOCUMENT ITS SHOWING ABAP RUNTIME ERROR.
    MESSAGE TYPE: - MDS_KEYMAP.
    MESSAGE CLASS: 001.
    PLEASE TELL ME WHAT TO DO?
    REGARDS..

    SIR THANK YOU FOR YOUR REPLY.
    I ALREADY DONE THAT DUMP ANALYSIS.
    SO PLEASE KINDLY GIVE ME IN DETAILS ABOUT THAT SOLUTION...

  • Error While Creating Asset Master in AS01

    Hi,
    While creating Asset Master in AS01,I am getting the below error.
    E003 SYST: Period 000 is not valid in financial year variant
    I am using the standard Fiscal year variant V3
    Kindly help me to fix this issue
    Thanks
    Kishore

    Hi
    GO to the transaction code  OBY6 , double clcik on company code  and see have you asigned the fiscal year variant to company code
    Kindly revert in case of any query
    regards
    roobal

  • Error while creating customer master data

    dear sir,
    i have created customer master and maintined all level general,compnay code and sales level data.and again deleted all areas thru t-code XD06.and thru se16n i have deleted the entires in kna1 knb1 knvv table
      again while creating one with same name showing error while maintaing sales level data
    Check: Table KNA1 does not exist, table KNVI does
    Message no. F2061
    plz help how do i rectify this problem and maintain the same cutomer no (external) again.
    regards,
    Debesh

    Hi,
    you did the wrong thing, don't remove the entries from standard table like KNA1, KNVV etc, SAP will maintained the entries in lot of tables same time.
    XD06 is used to set delete indicator, after wards you may create new customer master, if any problem for name you may change the name field as 'delete' for old customer.
    Now to solve your issue, i believe you need to first save the entries with maintainace of general data (KNA1) and then use XD02 to maintain the Sales area data, pl try this way it should work.
    If this way will not work, pl maintain the tax indicator in table KNVI manually to solve the issue.
    regards
    Vivek.
    Edited by: Vievk Vardhan on Dec 7, 2009 6:41 PM

  • Run time error while create Vendor master via MK01

    Dear Experts,
    when i try to create vendor master by MK01.....system throws run time error as below:
    "The exception 'CX_BADI_MULTIPLY_IMPLEMENTED' was raised, but it was not caught
    anywhere along
    the call hierarchy.
    Since exceptions represent error situations and this error was not
    adequately responded to, the running ABAP program
    'CVI_MAP_TITLE=================CP' has to be
    terminated."
    My current system is ECC 6 along with DBM. Business partner configuration is activated in the current system. I am getting this error after BP configuration. Could you please help me to fix this issue?.......Is it due to configuration or a dump from abap program?
    Regards
    Vetrivelan

    Hii,
       please search sdn before posting the threads.
    check these  links, it may help u............
    Short Dump - CX_BADI_MULTIPLY_IMPLEMENTED - BADI Q1SR1
    Short Dump - CX_BADI_MULTIPLY_IMPLEMENTED - BADI Q1SR1
    CX_BADI_NOT_IMPLEMENTED
    thanks.

  • Error while creating vendor master data via ALE

    Dear All
    I am trying to create vendor master data via ALE.
    I am using message type CREMAS.
    I get following error message in inbound system
    No batch input data for screen SAPMF02K 0610
    Message no. 00344
    If i try to manually create vendor , there is no error.  This particular screen belong to withholding tax, however all customizing settings for withholding tax are okay.
    please help.
    Thanks
    Sanjeev

    Try SAP Note # 96312 if that helps.

  • Error while creating asset master on a new company code

    Hi there,
    While trying to create a new asset master - Asset class XXX cannot be used in company code XXXX
        Message no. AA130
    Diagnosis
        When you create an asset, the system determines the chart of
        depreciation from the company code definition. In order for a chart of
        depreciation to be available for an asset class during asset
        maintenance, the chart of depreciation has to be entered for that asset
        class (Determine class valuation). Chart of depreciation YYYY that was
        determined is not entered for asset class 123
    System Response
        You cannot create any assets in your company code for this class.
    Please revert if you have any details regarding this. I am sure I am getting this error because of a missing entry in v_ankbv. But i am not sure on what is the config step i m missing.
    Thanks,

    You need to configure the node 'Determine Depreciation Areas in the Asset Class'  T Code-OAYZ.
    Path : Financial Accounting (New) > Asset Accounting > Valuation > Determine Depreciation Areas in the Asset Class.
    Assuming you have already done the other prior config steps involved like., Assign Chart of Depreciation to Company Code, Asset Classes etc.,
    You can also refer to the Best Practices Configuration guide (Link Below) for further details:
    http://help.sap.com/bp_bblibrary/600/html/N72_EN_DE.htm
    Regards
    Sreenivas
    Pls close the post if satisfied.

  • Error while creating material master

    hi,
    I'm getting this error message when I'm creating a material master in a specific plant/sloc. I'm probably guessing its in config. I really need some help here.
    "Tables TCURM and T001W inconsistent; notify your system administrator" .
    could any one  draw some light on this.
    thanks regards,
    chinta

    this is not application server specific problem.
    Suggest you to go to [Logistic/MM forum|SAP ERP - Logistics Materials Management (SAP MM);.
    regards,
    Vincent

  • Error while creating vendor master (xk01)

    i am trying to create a vendor master in t.code
    xk01, using standard objects, ie company code
    R300, purchasing org- R300, account group---LIEF.
    In  address screen, i entered country as US,
    system is giving an error
    *Communication error with the external tax system (VERTEX_MS0018)
    Message no. TAX_TXJCD864*
    pls give me a solution as soon as possible.
    rewards assured.

    Dear Pavan,
                   Check the input tax settings have been done in your  tax procedure with related to the country US.
    I hope it will help you
    Regards,
    Murali.

  • Error while creating the master-detail forms

    on creation of a new master-detail form or on edit of a existing master-detail form, i get the following error -
    ******** START ERROR **********
    Thu, 15 Mar 2001 23:02:16 GMT
    ORA-06502: PL/SQL: numeric or value error
    ORA-06512: at "CC_INTRANET.WWV_BIND", line 56
    ORA-06512: at "CC_INTRANET.WWV_UI_LOVF", line 3123
    ORA-06512: at "CC_INTRANET.WWV_UIFORM_BUILD", line 2850
    ORA-06512: at "CC_INTRANET.WWV_UIFORM_BUILD", line 5567
    ORA-06512: at line 8
    DAD name: cc_intranet
    PROCEDURE : CC_INTRANET.wwv_uiform_build.show_header
    URL : http://webdb.us.colorcon.com:7777/pls/cc_intranet/CC_INTRANET.wwv_uiform_build.show_header?p_wizard_mode=MASTER&
    ********** END ERROR ********
    any ideas anyone ... ?
    thanx in advance ...
    null

    more information on above -
    i upgraded webdb 2.2 to portal 3.0.6 and the new master-detail form is been created in the upgraded site.
    pls reply on this.
    thanx a bunch
    null

  • Error while creating customer master XD01

    i have created own account group and assigned external number range when am creating customer in xd01 am getting error in partner tab the SP,SH,BP,PY the no is blank and when am trying to save its gives error document is incomplete the  error   Message no. F2643
    Diagnosis
    The account group of the current customer is not defined for the required partner usage.
    where as when am assining internal number range its working fine kindly help
    Thanx

    Hi Mukesh
    Please check the following again,
    IMG > Logistic > SD > Basic functions > Partner determination > Customer master
    Define the Partner functions. If you are defining new then specify the "PARTNER TYPE" for each Partner function.
    - Define Account group. You can use existing one (0001-sod-to-party) or you can copy it or create new.
    - Define your Partner determination procedure.
    - Assign the required Partner functions (SP,SH,PY and BP are mandatory) to your Account group, so that they will be permitted for your Account group.
    - Assign the "Partner functions" to your new "Procedure ". Here you specify which are "mandatory" and which are "not changeable".
    - Assign the "Account group" to your new "Procedure".
    Now, go to XD01,enter your Account group,External number,company code,Sale area and proceed.
    If you are finding problem then,fill up all your data (general data, company code data), go to sales area data, fill up sales ,shipping and billing document tab and save it.
    Next, go to XD02, sales area data >partner function tab, here fill up the places for respective Partner functions.

  • Error while creating money market transaction - payment details not retrieving from BP master data.

    Hello friends
                      I have error while creating financial transaction. Payment details are not retrieving from BP master data to creating financial transaction screen.
    No payment details entered for transaction
    Message no. FTR0030
    Please advise to set off this.
    Thanks & Regards
    Swami

    Dear Swami,
    Please select one payment details in Business partner and use assigned tab from top selection parameter from standing instruction to assigned bank details to product type.
    It will open other window like above example for each product of treasury, then assign bank details to product. Once assigned and save.
    System will pick payment details in deal automatically based on business partner.
    Hope this solve your issue.
    Regards,
    Jain
    Message was edited by: Jain Varghese

  • Error while creating a column in master

    Hi all,
    I am using the sap business one 8.8 version.
    I am getting an error while creating a user defined column for a master table.
    The error code is -104.
    The method I had used for creating a master table is as follows.
    *#region Create Table*
            public static bool CreateTable(string TableName, string TableDescription, SAPbobsCOM.BoUTBTableType TableType, SAPbouiCOM.Application oApplication, SAPbobsCOM.Company oCompany)
                SAPbobsCOM.UserTablesMD oUserTableMD;
                int intRecCode;
                bool boolResult = false;
                oUserTableMD = (SAPbobsCOM.UserTablesMD)oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserTables);
                try
                    if (!oUserTableMD.GetByKey(TableName))
                        oUserTableMD.TableName = TableName;
                        oUserTableMD.TableDescription = TableDescription;
                        oUserTableMD.TableType = TableType;
                        intRecCode = oUserTableMD.Add();
                        if (intRecCode == 0)
                            boolResult = true;
                catch (Exception e)
                    oApplication.MessageBox(e.Message, 1, "Ok", "", "");
                finally
                    System.Runtime.InteropServices.Marshal.ReleaseComObject(oUserTableMD);
                    GC.Collect();
                return boolResult;
            #endregion
    ==================================
    The following is the code for creating a column in the above master
    private static void AddField(string TableName, string ColumnName, string ColDescription, SAPbobsCOM.BoFieldTypes FieldType, int Size, SAPbobsCOM.BoFldSubTypes SubType, string ValidValues, string ValidDescription, string
    SetValidValues, SAPbouiCOM.Application oApplication, SAPbobsCOM.Company oCompany)
    int intLoop;
                string[] strValue, strDesc;
                SAPbobsCOM.UserFieldsMD oUserFieldsMD;
                SAPbobsCOM.Recordset oRecordSet;
                oUserFieldsMD = (SAPbobsCOM.UserFieldsMD)oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserFields);
                oRecordSet = (SAPbobsCOM.Recordset)oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset);
                try
                    oRecordSet.DoQuery("SELECT COUNT(*) FROM CUFD WHERE TableID = '" + TableName + "' AND AliasID = '" + ColumnName + "'");
                    if (Convert.ToInt16(oRecordSet.Fields.Item(0).Value) == 0)
                        System.Runtime.InteropServices.Marshal.ReleaseComObject(oRecordSet);
                        oRecordSet = null;
                        strValue = ValidValues.Split(Convert.ToChar(","));
                        strDesc = ValidDescription.Split(Convert.ToChar(","));
                        if (strValue.GetLength(0) != strDesc.GetLength(0))
                            throw new Exception("Invalid Values");
                        oUserFieldsMD.TableName = TableName;
                        oUserFieldsMD.Name = ColumnName;
                        oUserFieldsMD.Description = ColDescription;
                        oUserFieldsMD.Type = FieldType;
                        if (FieldType != SAPbobsCOM.BoFieldTypes.db_Numeric)
                            oUserFieldsMD.Size = Size;
                        else
                            oUserFieldsMD.EditSize = Size;
                        oUserFieldsMD.SubType = SubType;
                        oUserFieldsMD.DefaultValue = SetValidValues;
                        for (intLoop = 0; intLoop <= strValue.GetLength(0) - 1; intLoop++)
                            oUserFieldsMD.ValidValues.Value = strValue[intLoop];
                            oUserFieldsMD.ValidValues.Description = strDesc[intLoop];
                            oUserFieldsMD.ValidValues.Add();
                        if (oUserFieldsMD.Add() != 0)
                            UpdateLastErrorDetails(-104, oCompany);
                catch (Exception e)
                { oApplication.MessageBox(e.Message, 1, "Ok", "", ""); }
                finally
                    if (oRecordSet != null)
                        System.Runtime.InteropServices.Marshal.ReleaseComObject(oRecordSet);
                        oRecordSet = null;
                    System.Runtime.InteropServices.Marshal.ReleaseComObject(oUserFieldsMD);
                    GC.Collect();

    Hi,
    I am newly using BI publisher . I am using 10.1.3.4.0 . I am just trying to create a report in test name. that is the first step to create a report where i am getting error. I am using default RPD paint , where all the user and Groups are defined .

  • Error Message no. MM214 while creating material master

    Hi folks!!
    While creating material master, when i fill the MRP controller field and press enter, I get the message...
    The MRP controller 391 does not exist for plant
    Message no. MM214
    I have checked, the MRP controller is availble in Master Data for MRP Controller. And we have already created many material master with this MRP Controller.
    What could be the possible cause for this error. Please help.
    Best regards

    Hi Qamar,
    Please go thru the bellow threads,
    Assignement of MRP controller to Plant
    MRP CONTROLLER
    MRP Controller
    Re: MRP controller extension from plant 1 to plant 2
    Thanks,
    Swamy H P

  • Error message AA119 while creating asset master through AS01

    Hi
    while creating asset master (AS01), i am getting following error:-
    Depreciation key M003 not allowed (Check your entry)
    Message no. AA119
    Diagnosis
    Depreciation key M003 is not defined.
    System Response
    Processing is terminated.
    Procedure
    You have the following choices:
    Use a defined depreciation key (use input help).
    Define a depreciation key in Customizing ("change" pushbutton) and activate the key.
    I have done following in configuration:-
    1) No change in base method
    2) copied multi level method from standard key "011" to "M03" and maintain vlaue as - Acquisiton year - 9999, Years - 999, Validity period in month - 12, Base value key as - 01and depreciation % as 10
    3) No change in Period Control Methods
    4) Copied standard depreciation key "GL20" as "M003" and maintain the multilevel method as "M03"
    5) save the configuration
    6) Activate the depreciation key by selecting depreciation key and clicking on Activate button on top of the screen
    7) Import the configuration
    now while creating asset, depreciation key M003 is appearing in drop down list but getting above error. but if I tried with depreciation key GL20 (which is standard depreciation key) system accepting the input
    In target client, depreciation key display in Active stage.
    please revert if anybody has any clue to come out from above problem.
    Regards
    DD

    Dear All Foram members
    Thanks for your response.
    I got the solution and now problem has been resolve.
    Initially i have maintain Scrap Value as Default Value from Company code and Depreciation Area in Depreciation Key  (AFAMA) and I was getting the error. But now I have change the Scrap Value as CutOff Value is ignore and problem gets resolve.
    But still do not understand the relation between the erro and Scrap Value assignment. Any Idia. It will be helpful for other members also.
    Thanks Pankaj, Madhu and Paul...........
    Regards
    DD

Maybe you are looking for