Error while Creating WBS element using BAPI 'BAPI_BUS2054_CREATE_MULTI'

Hi Expert,
I've a requirement to create WBS elements using BAPI. And I am using BAPIs in the following manner.
CALL FUNCTION 'BAPI_PS_INITIALIZATION'
CALL FUNCTION 'BAPI_BUS2054_CREATE_MULTI'
 EXPORTING
 i_project_definition = g_pdwbs
TABLES
 it_wbs_element = it_wbs_element
 et_return = it_return
EXTENSIONIN =
EXTENSIONOUT =
 CALL FUNCTION 'BAPI_PS_PRECOMMIT'
 CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
When I do so I am getting the below errors. Please suggest.
"Individual check for creating the object WBS Element C-497082 required ".
"Individual check for creating the object WBS Element C-497082-0001 required".
Please suggest how to correct this error.
<REMOVED BY MODERATOR - REQUEST OR OFFER POINTS ARE FORBIDDEN>
Edited by: Alvaro Tejada Galindo on Aug 18, 2008 5:25 PM

I am getting the same error, but I cannot figure it out how to detect it and fix it. Will you please share your solution?
Thanks,

Similar Messages

Problem while creating WBS elements using LSMW

Hello experts,
I am able to create Project Definitions using LSMW. (using recording)
But there is a problem while creating WBS elements.
Tcode CJ20 has table control and that will become problem for multiple rows (levels).
Can anyone suggest a solution to mass upload WBS elements?
Thanks for your valuable advice.

Hi,
Instead of using "BAPI_PROJECT_MAINTAIN", use following solution. We are using this solution and it is working pretty good.
If the WBS element is already created and you want to create one more with same data, first get the WBS related information using BAPI_PROJECT_GETINFO as you are doing currently.
I am using different sets of BAPIs to create project, create / change WBS element.
I use function module from Function group CJ2001 ( Project related BAPIs ), CJ2054 ( WBS related BAPIs ) and PS_BAPI ( pre/post processing BAPIs ). There are specific order in which you need to execute these BAPIs.
For example if you want to create / change the WBS element, the BAPIs sequence is:
1. BAPI_PS_INITIALIZATION
2. BAPI_BUS2054_CREATE_MULTI ( to create WBS )
or
2. BAPI_BUS2054_CHANGE_MULTI ( to change WBS )
3. BAPI_PS_PRECOMMIT
4. BAPI_TRANSACTION_COMMIT
Check the documentation of BAPI "BAPI_BUS2054_CREATE_MULTI " to see how these function modules work.
Let me know if you need further information.
Regards,
RS

Error while creating WBS element.. regarding source structure

I am creating a project and then a WBS element. Its a investment project. While creating WBS element XXX, it gives me error that "WBS element XXX: SOurce assignments for source structure A1 missing in Investment Profile ZZZZZ."
What shall I check? what could be the reason?
Thanks,
A

hi,
In this IMG activity, you define the source structures used when settling and costing joint products.
A source structure contains several source assignments, each of which contains the individual cost elements or cost element intervals to be settled using the same distribution rules
Just consult with your CO Consultant...
Venkatesh

Error while creating activity by using BAPI

Hi,
While creating activity by using BAPI Im getting error as follows,
Start processing of refference object handle generated.
Integrity rule a d0008 broken
business partner with function from vbkakom not vbpakom
Integrity rule a d0008 broken
edit all incomplete field .
Please help me for solving this issue.
Regards,
Suresh

Not received any proper reply Closing the issue.

BAPI_BUS2054_CREATE_MULTI error while creating WBS Element

Hi Gurus,
I am trying to create WBS element by using BAPI_BUS2054_CREATE_MULTI
but bapi raise an error that I can not understand.
in return table I got the following error with the error code CJ - 021
" XXXX-YYYY-ZZZZ WBS Element does not exist "
But I try to create already? What does 'Does not exist' mean?
By the way I am using
CALL FUNCTION 'BAPI_PS_INITIALIZATION'. before using BAPI_BUS2054_CREATE_MULTI
thanks in advance, it is an very important
Mehmet Ali

Hi.
I have the same problem. Have you solved?
Thanks.
Angie

Creating WBS element using bapi BAPI_PS_INITIALIZATION

Hi All,
I have created Project definition successfully using function module "BAPI_PROJECT_MAINTAIN" .
But while trying to create Wbs-Element for the project definition using same function module "BAPI_PROJECT_MAINTAIN" we are getting the following error
Key does not correspond to mask: TR.XXXXX.X.X.XXX
Could any one help me out to resolve this issue.
Thanks in advance.
harsha p

Hi harsha p,
Error CJ609 "Key does not correspond to mask:TR.XXXXX.X.X.XXX" is always caused by an inconsistency between the project/WBS object number and the coding mask. Therefore, to solve the problem can you please try to run report ZZADJUSTPOSID from note 453280 attached?
The report should be imported into your system manually by SE38.
Please run it first in test mode to check the wrong entries and then correct them in update mode.
Best Regards,
Edna

Error while creating fixed asset using BAPI BAPI_FIXEDASSET_OVRTAKE_CREATE

Hi
I am getting an error stating "O DEP START field is not ready for input, while trying to create asset using the BAPI BAPI_FIXEDASSET_OVRTAKE_CREATE.How to make the field input enabled in BAPI .Kindly suggest.
Thanks

Hello,
Review AO21.
Regards
Waza

Unable to capture error message while creating an SO using bapi

Hi,
Can anybody suggest how to capture the error message while creating a SO using BAPI.
I have developed a customeized BAPI and using the BDC format to create the SO.
Note: i am using a call transaction method for the BDC.
I am sending the message into message1.
but i am unable to send the same into an internal table
shyam.

Hi Shyam
If my understanding is correct, you are performing BDC process within the customized BAPI...
And you want to collect the messages from BDC to an internal table and pass to the output.
Proceed as below:
1. While calling BDC, use CALL TRANSACTION .... with addition: MESSAGES INTO itab. The structure of itab should be like BDCMSGCOLL.
2. Now the messages will be collected in ita.
3. Prepare the messages using FM: FORMAT_MESSAGE
4. Collect to the returning table.
Hope this helps...
Though i could not understand the reason of creating a BDC within BAPI, you can opt for loading orders via BAPI's like: BAPI_SALESORDER_CREATEFROMDAT1 or BAPI_SALESORDER_CREATEFROMDAT2.
Kind Regards
Eswar

Error while creating resource group using non-globalzones.

Dear all,
Hi techs please guide me how to create failover resource group in nongloablzones.
I'm getting error while creating resource group using non-globalzones.
My setup:
I have two node cluster running sun cluster 3.2 configured and running properly.
node1: sun5
nide2: sun8
I have create non-globalzone "zone1" in node:sun5
I have create non-globalzone "zone2" in node:sun8
node:sun5# clrg create -n sun5:zone1,sun8:zone2 zonerg
*(C160082) WARNING: one or more zones in the node list have never been fully booted in the cluster mode,verify that correct zone name was entered.*
kindly guide me how to create Apache resource group using non-glabalzones, i'm new to sun cluster 3.2. please guide me step by step information.
Thanks in advance,
veera
Edited by: veeraa on Dec 19, 2008 1:54 AM

Hi Veera,
Actually you are getting a warning message where one of two things could have happened. Either you specified an incorrect zone name or one of the zones has not been fully booted. It's likely that you haven't booted the zones, so please follow this:
zoneadm list -iv
If zone1 or zone2 are not running then boot and configure them
zoneadm -z <zone> boot
zlogin -C <zone>
After that you can continue to follow the step by step instructions at
http://docs.sun.com/app/docs/doc/819-2975/chddadaa?a=view
These may also help
http://blogs.sun.com/Jacky/entry/a_simple_expample_about_how
http://blogs.sun.com/SC/en_US/entry/sun_cluster_and_solaris_zones
Regards
Neil

Create Excise invoice(J1IIN) document while creating billing document using bapi BAPI_BILLINGDOC_CREATEMULTIPLE

Dear Experts,
My scenario is:
We have batch split scenario, where the parent line item of billing document has 0 quantity and its subsequent item (item with batch number) holds actual quantity data.
When we create billing document using VF01 against delivery document, system creates billing document along with excise invoice document (J1IIN Document). And in excise document contain same number of line items that of billing document. Please see the below attachment:
Biiling document screen shot:
While creating billing document, the J1IIN Document created automatically. Below is the screen-shot for the same.
Now the issue is:
When we create billing document using BAPI: BAPI_BILLINGDOC_CREATEMULTIPLE system creating only billing document and not creating excise invoice document.
When we create excise document manually using J1IIN the zero quantity line items are excluded in excise invoice document.
Please see the below screen-shot for the same; The z quantity line items are missing.
We want excise document to be created while creating billing document using BAPI BAPI_BILLINGDOC_CREATEMULTIPLE. Or is there any other BAPI for the same purpose.
Customization is also maintained for creating excise invoice document automatically.
Regards,
Rajesh Sadula.

HI
Pricing will be carried basing on the pricing
procedure.
Case1: Prices will be carried out automatically if
necessary condition records are maintained for the
condition type.
For this you can go to Sales Order-> Item Conditions
In the screen you can click on command button Analysis,
which gives you the list of condition types associated
to the pricing procedure. By clicking on the condition
type you can know the action that has taken place.
Case2: Manually forcing prices for Items.
To do this, you have to populate ORDER_CONDITIONS_IN &
ORDER_CONDITIONS_INX. Also note to identify the item
numbers, you manually pass the item number for each item
in the sales order, use the same item number for
populating conditions.
Parameters required:
ORDER_CONDITIONS_IN:
ITM_NUMBER, COND_TYPE, COND_VALUE, CURRENCY
ORDER_CONDITIONS_INX:
ITM_NUMBER, COND_TYPE, UPDATEFLAG, COND_VALUE,CURRENCY.
Hope the above info helps you. Do revert back if you
need more info.
Kind Regards
Eswar

Error in creating WBS element BAPI_BUS2054_CREATE_MULTI

Hi
I am calling BAPI_BUS2054_CREATE_MULTI for creating WBS elements for the blocked project . I am passing the detailed project definitiion with level ( like A5/01/01) . I am getting error that WBS element for the object could not be created error 076 that BAPI is not initialized .
Now to solve this I called BAPI_PS_INITIALIZATION first then am calling BAPI_BUS2054_CREATE_MULTI then its throwing dump and if I want to run thru se37 then still giving the same error mentioned above
Please let me know what should I need to do to remove the error .
Helpful answer will definetly ..
Thanks a lott in advance

Hi ,
I want to create a WBS element using the BAPI's BAPI_BUS2054_CREATE_MULTI .
I did this sequence of test :
BAPI_PS_INITIALIZATION
BAPI_BUS2054_CREATE_MULTI
And I have this return
S CNIF_PI 004 Individual check for creating the object WBS Element U008-F033-001 required
CAn you tell me what to do in order to resolve this problem ( calling a commit after this sequence leads to 'DUMP' bacause no precommit is called before )
can u send me a code Plz...
Thanks in advance

Error while creating new projects using api

Hello,
I am having error while creating projects using standard api, PA_PROJECT_PUB.CREATE_PROJECTS. The error I am having is as follow.
Source template ID is invalid.
===
My code is as follow:
SET SERVEROUTPUT ON SIZE 1000000
SET VERIFY OFF
define no=&amg_number
DECLARE
-- Variables used to initialize the session
l_user_id NUMBER;
l_responsibility_id NUMBER;
cursor get_key_members is
select person_id, project_role_type, rownum
from pa_project_players
where project_id = 1;
-- Counter variables
a NUMBER := 0;
m NUMBER := 0;
-- Variables needed for API standard parameters
l_commit VARCHAR2(1) := 'F';
l_init_msg_list VARCHAR2(1) := 'T';
l_api_version_number NUMBER :=1.0;
l_return_status VARCHAR2(1);
l_msg_count NUMBER;
l_msg_data VARCHAR2(2000);
-- Variables used specifically in error message retrieval
l_encoded VARCHAR2(1) := 'F';
l_data VARCHAR2(2000);
l_msg_index NUMBER;
l_msg_index_out NUMBER;
-- Variables needed for Oracle Project specific parameters
-- Input variables
l_pm_product_code VARCHAR2(30);
l_project_in pa_project_pub.project_in_rec_type;
l_key_members pa_project_pub.project_role_tbl_type;
l_class_categories pa_project_pub.class_category_tbl_type;
l_tasks_in pa_project_pub.task_in_tbl_type;
-- Record variables for loading table variables above
l_key_member_rec pa_project_pub.project_role_rec_type;
l_class_category_rec pa_project_pub.class_category_rec_type;
l_task_rec pa_project_pub.task_in_rec_type;
-- Output variables
l_workflow_started VARCHAR2(100);
l_project_out pa_project_pub.project_out_rec_type;
l_tasks_out pa_project_pub.task_out_tbl_type;
-- Exception to call messag handlers if API returns an error.
API_ERROR EXCEPTION;
BEGIN
-- Initialize the session with my user id and Projects, Vision Serves (USA0
-- responsibility:
select user_id into l_user_id
from fnd_user
where user_name = 'SSHAH';
select responsibility_id into l_responsibility_id
from fnd_responsibility_tl
where responsibility_name = 'Projects Implementation Superuser';
pa_interface_utils_pub.set_global_info(
p_api_version_number => l_api_version_number,
p_responsibility_id => l_responsibility_id,
p_user_id => l_user_id,
p_msg_count => l_msg_count,
p_msg_data => l_msg_data,
p_return_status => l_return_status);
if l_return_status != 'S' then
raise API_ERROR;
end if;
-- Provide values for input variables
-- L_PM_PRODUCT_CODE: These are stored in pa_lookups and can be defined
-- by the user. In this case we select a pre-defined one.
select lookup_code into l_pm_product_code
from pa_lookups
where lookup_type = 'PM_PRODUCT_CODE'
and meaning = 'Conversion';
-- L_PROJECT_IN: We have to provide values for all required elements
-- of this record (see p 5-13, 5-14 for the definition of the record).
-- Customers will normally select this information from some external
-- source
l_project_in.pm_project_reference := 'AGL-AMG Project &no';
l_project_in.project_name := 'AGL-AMG Project &no';
l_project_in.created_from_project_id := 1;
l_project_in.carrying_out_organization_id := 2864; /*Cons. West*/
l_project_in.project_status_code := 'UNAPPROVED';
l_project_in.start_date := '01-JAN-11';
l_project_in.completion_date := '31-DEC-11';
l_project_in.description := 'Trying Hard';
l_project_in.project_relationship_code := 'Primary';
-- L_KEY_MEMBERS: To load the key member table we load individual
-- key member records and assign them to the key member table. In
-- the example below I am selecting all of the key member setup
-- from an existing project with 4 key members ('EE-Proj-01'):
for km in get_key_members loop
-- Get the next record and load into key members record:
l_key_member_rec.person_id := km.person_id;
l_key_member_rec.project_role_type := km.project_role_type;
-- Assign this record to the table (array)
l_key_members(km.rownum) := l_key_member_rec;
end loop;
-- L_CLASS_CATEGORIES: commented out below should fix the error we get
-- because the template does not have an assigment for the mandatory class
-- 'BAS Test'
l_class_category_rec.class_category := 'Product';
l_class_category_rec.class_code := 'Non-classified';
-- Assign the record to the table (array)
l_class_categories(1) := l_class_category_rec;
-- L_TASKS_IN: We will load in a single task and a subtask providing only
-- the basic fields (see pp. 5-16,5-17,5-18 for the definition of
-- the task record)
l_task_rec.pm_task_reference := '1';
l_task_rec.pa_task_number := '1';
l_task_rec.task_name := 'Construction';
l_task_rec.pm_parent_task_reference := '' ;
l_task_rec.task_description := 'Plant function';
-- Assign the top task to the table.
l_taskS_in(1) := l_task_rec;
-- Assign values for the sub task
l_task_rec.pm_task_reference := '1.1';
l_task_rec.pa_task_number := '1.1';
l_task_rec.task_name := 'Brick laying';
l_task_rec.pm_parent_task_reference := '1' ;
l_task_rec.task_description := 'Plant building';
-- Assign the subtask to the task table.
l_tasks_in(2) := l_task_rec;
-- All inputs are assigned, so call the API:
pa_project_pub.create_project
(p_api_version_number => l_api_version_number,
p_commit => l_commit,
p_init_msg_list => l_init_msg_list,
p_msg_count => l_msg_count,
p_msg_data => l_msg_data,
p_return_status => l_return_status,
p_workflow_started => l_workflow_started,
p_pm_product_code => l_pm_product_code,
p_project_in => l_project_in,
p_project_out => l_project_out,
p_key_members => l_key_members,
p_class_categories => l_class_categories,
p_tasks_in => l_tasks_in,
p_tasks_out => l_tasks_out);
-- Check the return status, if it is not success, then raise message handling
-- exception.
IF l_return_status != 'S' THEN
dbms_output.put_line('Msg_count: '||to_char(l_msg_count));
dbms_output.put_line('Error: ret status: '||l_return_status);
RAISE API_ERROR;
END IF;
-- perform manual commit since p_commit was set to False.
COMMIT;
--HANDLE EXCEPTIONS
EXCEPTION
WHEN API_ERROR THEN
FOR i IN 1..l_msg_count LOOP
pa_interface_utils_pub.get_messages(
p_msg_count => l_msg_count,
p_encoded => l_encoded,
p_msg_index => i,
p_msg_data => l_msg_data,
p_data => l_data,
p_msg_index_out => l_msg_index_out);
dbms_output.put_line('ERROR: '||to_char(l_msg_index_out)||': '||l_data);
END LOOP;
rollback;
WHEN OTHERS THEN
dbms_output.put_line('Error: '||sqlerrm);
FOR i IN 1..l_msg_count LOOP
pa_interface_utils_pub.get_messages(
p_msg_count => l_msg_count,
p_encoded => l_encoded,
p_msg_index => i,
p_msg_data => l_msg_data,
p_data => l_data,
p_msg_index_out => l_msg_index_out);
dbms_output.put_line('ERROR: '||to_char(l_msg_index_out)||': '||l_data);
END LOOP;
rollback;
END;
===
Msg_count: 1
Error: ret status: E
ERROR: 1: Project: 'AGL-AMG Project 1123'
Source template ID is invalid.
PL/SQL procedure successfully completed.

I was using a custom Application, which had a id other then 275 (which belongs to Oracle projects)

Error while creating new crosstab using

I am getting the following error while creating a new crosstab object within Swing application. This error has started coming after we applied Oracle patch 9206 on database. The error originates from one of the classes in the olap_api_92.jar.
==========================================================
Wed Feb 02 09:13:51 CST 2005 In BuilderWizardValidateAdapter::wizardValidatePage
oracle.express.idl.util.OlapiException: No more data to read from socket
 at oracle.express.idl.ExpressOlapiDataSourceModule.DefinitionManagerInterfaceStub.crtCurMgrs2(DefinitionManagerInterfaceStub.java:927)
 at oracle.express.olapi.data.full.DefinitionManagerSince9202.createOLAPICursorManagers(DefinitionManagerSince9202.java:611)
 at oracle.express.olapi.data.full.ExpressDataProvider.createCursorManagers(ExpressDataProvider.java:1325)
=========================================================
Please check the BIcheckconfig output. It does not show any errors.
=========================================================
<?xml version="1.0" encoding="UTF-8" ?>
<BICheckConfig version="1.0.2.0">
<Check key="JDEV_ORACLE_HOME" value="C:\Mohan\Installs\Jdev904"/>
<Check key="JAVA_HOME" value="C:\Mohan\Installs\Jdev904\jdk"/>
<Check key="JDeveloper version" value="9.0.4.0.1419"/>
<Check key="BI Beans release description" value="BI Beans 9.0.4 Production Release"/>
<Check key="BI Beans component number" value="9.0.4.23.0"/>
<Check key="BI Beans internal version" value="2.7.5.32"/>
<Check key="host" value="db03schgefage"/>
<Check key="port" value="1521"/>
<Check key="sid" value="biolapp"/>
<Check key="user" value="nairs5"/>
<Check key="Connecting to the database" value="Successful"/>
<Check key="JDBC driver version" value="9.2.0.4.0"/>
<Check key="JDBC JAR file location" value="C:\Mohan\Installs\Jdev904\jdev\lib\patches"/>
<Check key="Database version" value="9.2.0.6.0"/>
<Check key="OLAP Catalog version" value="9.2.0.6.0"/>
<Check key="OLAP AW Engine version" value="9.2.0.6.0"/>
<Check key="OLAP API Server version" value="9.2.0.6.0"/>
<Check key="BI Beans Catalog version" value="N/A; not installed in nairs5"/>
<Check key="OLAP API JAR file version" value="9.2"/>
<Check key="OLAP API JAR file location" value="C:\Mohan\Installs\Jdev904\jdev\lib\ext"/>
<Check key="OLAP API Metadata Load" value="Successful"/>
<Check key="Number of metadata folders" value="3"/>
<Check key="Number of metadata measures" value="569"/>
<Check key="Number of metadata dimensions" value="5"/>
<Check key="OLAP API Metadata">
<![CDATA[==============================================================================
Type Name (S=Schema, C=Cube, M=Measure, D=Dimension)
========= ====================================================================
Folder... ROOT
Folder... Auto Claim Measures
Folder... Service Measures
Folder... Claim Counts
Folder... Cell Summary Cube
Folder... Actual Measures
Measure.. Actual Acceptance Rate
Measure.. Actual Annualized Bill amt
Measure.. Actual Application Count
Measure.. Actual Avg Annual Billing
Measure.. Actual Contacts Count
Measure.. Actual Commission Amt
 at oracle.express.olapi.data.full.ExpressDataProvider.internalCreateCursorManager(ExpressDataProvider.java:680)
 at oracle.express.olapi.data.full.ExpressDataProvider.createCursorManager(ExpressDataProvider.java:586)
 at oracle.olapi.data.source.DataProvider.createCursorManager(DataProvider.java:268)
 at oracle.dss.dataSource.QueryUtilities.setUpCursors(QueryUtilities.java:559)
 at oracle.dss.dataSource.QueryServer._setUpCursorsForMainQuery(QueryServer.java:7039)
 at oracle.dss.dataSource.QueryServer._getCursorForCube(QueryServer.java:4098)
 at oracle.dss.dataSource.QueryServer._updateCube(QueryServer.java:4055)
 at oracle.dss.dataSource.QueryServer._applySelections(QueryServer.java:2661)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:324)
 at oracle.dss.util.Operation.execute(Operation.java:69)
 at oracle.dss.dataSource.OperationQueue.update(OperationQueue.java:68)
 at oracle.dss.dataSource.common.BaseOperationQueue.addOperation(BaseOperationQueue.java:176)
 at oracle.dss.dataSource.common.BaseOperationQueue.addOperation(BaseOperationQueue.java:146)
 at oracle.dss.dataSource.QueryServer.queueOperation(QueryServer.java:7076)
 at oracle.dss.dataSource.QueryServer.applySelection(QueryServer.java:2192)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:324)
 at oracle.dss.util.Operation.execute(Operation.java:69)
 at oracle.dss.dataSource.QueryManagerServer.sendQueue(QueryManagerServer.java:1549)
 at oracle.dss.dataSource.common.OperationQueue.update(OperationQueue.java:198)
 at oracle.dss.dataSource.common.BaseOperationQueue.addOperation(BaseOperationQueue.java:176)
 at oracle.dss.dataSource.common.BaseOperationQueue.addOperation(BaseOperationQueue.java:146)
 at oracle.dss.dataSource.common.OperationQueue.addOperation(OperationQueue.java:127)
 at oracle.dss.dataSource.client.QueryClient.applySelection(QueryClient.java:970)
 at oracle.dss.dataSource.common.QueryQueryAccess$SelCursor.getDataAccess(QueryQueryAccess.java:1133)
 at oracle.dss.dataSource.common.QueryQueryAccess.getDataAccess(QueryQueryAccess.java:278)
 at oracle.dss.datautil.QueryAccessUtilities._getValues(QueryAccessUtilities.java:639)
 at oracle.dss.datautil.QueryAccessUtilities._getValues(QueryAccessUtilities.java:705)
 at oracle.dss.datautil.QueryAccessUtilities.getValues(QueryAccessUtilities.java:608)
 at oracle.dss.queryBuilder.QueryBuilderUtils.getSelectedMeasures(QueryBuilderUtils.java:623)
 at oracle.dss.queryBuilder.SelectedItemsPanel.populateTree(SelectedItemsPanel.java:298)
 at oracle.dss.queryBuilder.SelectedItemsPanel.refreshTree(SelectedItemsPanel.java:333)
 at oracle.dss.queryBuilder.SelectedItemsPanel.setActive(SelectedItemsPanel.java:366)
 at oracle.dss.queryBuilder.ItemsPanel.setActive(ItemsPanel.java:251)
 at oracle.dss.datautil.gui.DefaultBuilderDialog.setActive(DefaultBuilderDialog.java:1072)
 at oracle.dss.datautil.gui.DefaultBuilderDialog.validateNextPreviousEvent(DefaultBuilderDialog.java:1396)
 at oracle.dss.datautil.gui.DefaultBuilderDialog$BuilderWizardValidateAdapter.wizardValidatePage(DefaultBuilderDialog.java:2113)
 at oracle.bali.ewt.wizard.WizardPage.processWizardValidateEvent(Unknown Source)
 at oracle.bali.ewt.wizard.WizardPage.validatePage(Unknown Source)
 at oracle.dss.datautil.gui.CustomImageWizardPage.validatePage(CustomImageWizardPage.java:81)
 at oracle.bali.ewt.wizard.BaseWizard.validateSelectedPage(Unknown Source)
 at oracle.bali.ewt.wizard.BaseWizard.doNext(Unknown Source)
 at oracle.dss.datautil.gui.CustomWizard.doNext(CustomWizard.java:415)
 at oracle.bali.ewt.wizard.BaseWizard$Action.actionPerformed(Unknown Source)
 at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1786)
 at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(AbstractButton.java:1839)
 at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
 at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
 at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:245)
 at java.awt.Component.processMouseEvent(Component.java:5100)
 at java.awt.Component.processEvent(Component.java:4897)
 at java.awt.Container.processEvent(Container.java:1569)
 at java.awt.Component.dispatchEventImpl(Component.java:3615)
 at java.awt.Container.dispatchEventImpl(Container.java:1627)
 at java.awt.Component.dispatchEvent(Component.java:3477)
 at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483)
 at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3198)
 at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3128)
 at java.awt.Container.dispatchEventImpl(Container.java:1613)
 at java.awt.Window.dispatchEventImpl(Window.java:1606)
 at java.awt.Component.dispatchEvent(Component.java:3477)
 at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
 at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
 at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
 at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:141)
 at java.awt.Dialog$1.run(Dialog.java:540)
 at java.awt.Dialog.show(Dialog.java:561)
 at java.awt.Component.show(Component.java:1133)
 at java.awt.Component.setVisible(Component.java:1088)
 at oracle.bali.ewt.wizard.WizardDialog.runDialog(Unknown Source)
 at oracle.dss.datautil.gui.DefaultBuilderDialog.runDialog(DefaultBuilderDialog.java:489)
 at oracle.dss.datautil.gui.DefaultBuilderDialog.run(DefaultBuilderDialog.java:466)
 at oracle.dss.queryBuilder.QueryBuilder.run(QueryBuilder.java:2401)
 at gecf.pmg.PmgBiOlapApp.newCrosstabWiz(PmgBiOlapApp.java:1622)
 at gecf.pmg.PmgBiOlapApp.mNewCrosstab_ActionPerformed(PmgBiOlapApp.java:1563)
 at gecf.pmg.PmgBiOlapApp$5.actionPerformed(PmgBiOlapApp.java:696)
 at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1786)
 at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(AbstractButton.java:1839)
 at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
 at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
 at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:245)
 at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:231)
 at java.awt.Component.processMouseEvent(Component.java:5100)
 at java.awt.Component.processEvent(Component.java:4897)
 at java.awt.Container.processEvent(Container.java:1569)
 at java.awt.Component.dispatchEventImpl(Component.java:3615)
 at java.awt.Container.dispatchEventImpl(Container.java:1627)
 at java.awt.Component.dispatchEvent(Component.java:3477)
 at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483)
 at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3198)
 at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3128)
 at java.awt.Container.dispatchEventImpl(Container.java:1613)
 at java.awt.Window.dispatchEventImpl(Window.java:1606)
 at java.awt.Component.dispatchEvent(Component.java:3477)
 at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
 at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
 at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
 at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
 at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
 at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)

I suspect that you have either not fully applied the patch or alternatively the patching process did not complete.
If you are using an analytic workspace, connect as OLAPSYS account and run the following commands:
exec CWM2_OLAP_METADATA_REFRESH.MR_REFRESH
exec CWM2_OLAP_METADATA_REFRESH.MR_AC_REFRESH
If this does not resolve the error, and assuming your system worked prior to applying the 9206 patch, then the patch may need to be reapplied.
Hope this helps
Business Intelligence Beans Product Management Team
Oracle Corporation

Error while creating a material using Bapi_material_savedata

Hi,
there is an error encountered while creating a material using BAPI_MATERIAL_SAVEDATA..
The Error description is " Material description is not transfered " even after supplying the Material description and other mandatory field information like industrial sector, material type ,basic view indicator,Base UOM,Base UOM ISO code.
Please let me know the solution, if you know.

Hi,
Please search the SCN for the answers
https://www.sdn.sap.com/irj/scn/advancedsearch?query=errorinBAPI_MATERIAL_SAVEDATA+&cat=sdn_all

Error while creating logical file using transaction FILE

Hello there,
I am facing an error while creating Logical File name definition using transaction FILE
This is the input which I'm trying to give
Logical file name: ZTEST
Name : ZTEST
Physical file : ZTEST_1<DATE><TIME>.csv
Data format: ASC
Application area: BW
Logical path:ZTEST_1_DATAOUT
when I tried to save it throws me an error like ASSIGN_SUBSTRING_NOT_ALLOWED
Please help.

Hi,
Please check the OSS Notes :
Note 792061 - SP Case Locator: Dump: ASSIGN to a substring isn't allowed.
SAP Note 1297989 - Short dump ASSIGN_SUBSTRING_NOT_ALLOWED
Hope this solves the problem.
-Vikram

Error while Creating WBS element using BAPI 'BAPI_BUS2054_CREATE_MULTI'

Similar Messages

Maybe you are looking for