Error while database export in package SAPDODS_33 (Unicode conversion)
Hello,
I am performing Unicode conversion on an upgraded BI 7.0 system. This is running on AIX/DB2.
When I take database export for conversion, one package fails (SAPDODS_33) with error "The file system is full". In fact, df -k doesn't show that any file system is full.
I am taking the export to the following location: /db2/BWS/sapdata/EXPORT_DIR
There are 3 system-managed temporary tablespaces: PSAPTEMP, PSATEMP16 & SYSTOOLSTMPSPACE which were residing in /db2/BWS/saptemp1/NODE0000. This was getting full during the export. Now these temp.tablespaces have been relocated to a new file system of size 15GB.
But still the package SAPDODS_33 doesn't get exported. Could you please let me know how to solve this issue?
Thanks a lot!
Sundar.
=====================================================================================
SAPDODS_33.log
(DB) INFO: connected to DB
(rscpsumg) Please look also into "SAPDODS_33012.xml".
(rscpMC) Warn: env I18N_NAMETAB_TIMESTAMPS = IGNORE
(rscpMC) Warn: UMGCONTAINER has 1 problems.
(rscpMC) Warn: Global fallback code page = 1160
(rscpMC) Warn: Common character set is not 7-bit-ASCII
(rscpMC) Warn: Collision resolution method is 'fine'
(rscpMC) Warn: R3trans code pages = Normal
(rscpMC) Warn: EXPORT TO ... code pages = Normal
(rscpMC) Warn: Source is 'MDMP'
(rscpMC) Warn: I18N_NAMETAB_NORM_ALLOW = 0
(rscpMC) Warn: I18N_NAMETAB_NORM_LOG = 0
(rscpMC) Warn: I18N_NAMETAB_ALT_ALLOW = 0
(rscpMC) Warn: I18N_NAMETAB_ALT_LOG = 0
(rscpMC) Warn: I18N_NAMETAB_OLD_ALLOW = 0
(rscpMC) Warn: I18N_NAMETAB_OLD_LOG = 0
(GSI) INFO: dbname = "BWS
(GSI) INFO: vname = "DB6 "
(GSI) INFO: hostname = "UNKNOWN
(GSI) INFO: sysname = "AIX"
(GSI) INFO: nodename = "itmlartdev01x"
(GSI) INFO: release = "3"
(GSI) INFO: version = "5"
(GSI) INFO: machine = "002417CA4C00"
(GSI) INFO: instno = "0020169337"
(EXP) ERROR: DbSlExeRead failed
rc = 99, table "/BIC/B0000786000"
(SQL error -968)
error message returned by DbSl:
SQL0968C The file system is full. SQLSTATE=57011
(DB) INFO: disconnected from DB
/usr/sap/BWS/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/BWS/SYS/exe/run/R3load: END OF LOG: 20071211053119
p/sapinst/sapinst_instdir/NW04S/LM/COPY/DB6/EXP/CENTRAL/AS-ABAP/EXP #
Hi Sundar,
if the problem is due to a high temp space usage. The root cause is typically the
sort during export. If the table is large, the sort spills to temp.
You can avoid the sort by doing an unsorted export or tweak the DB2 optimizer to use the primary key to do the sort.
Before DB2 9, you can reduce the OVERHEAD tablespace parameter to zero. Return this value to its previous value after the successful export. This is a indirect hint to the optimizer that random IOs are cheap. This might not help.
With DB2 9, this should not happen, because the DB2_OPT_MAX_TEMP_SIZE=10240 registry variable is set under DB2_WORKLOAD=SAP which limits the temp space usage to 10GB if possible. You can reduce this parameter further if necessary. Another problem could be that the optimizer has chosen the wrong temp space. The optimizer choses the temp space with the largest amount of pages (not size).
Regards, Jens
Similar Messages
-
Syntax Error while running step 34 (35) after unicode conversion
Hello,
We are converting our test system to Unicode to find out how to do it
in our production system. We are at step 34/35 (Starting RFC job's) in
the database installation so we are almost done but we have encounted a
problem that we can't find a solution to. The error log in Sapinst give this
information:
ERROR 2008-11-09 11:19:19 [iaxxrfcimp.cpp:1103] CAbRfcImpl::performFunctionCall FRF-00025 Unable to call function.
Error message: ?`>?/?????????>??????/_???&<?(????????????????????????????????????????????????? .
At the same time we can read the following text in dev_w1 (and dev_w0 and so on):
A *** ERROR => Syntax error in program SAPLBTCH [abgen.c 1388]
A *** ERROR => > Include LBTCHF39 line 173 [abgen.c 1390]
A *** ERROR => > Statement "âu2018âu2018âu2018âu2018âu2018IF" is not defined. Check your spelling. spelling. [abgen.c 1393]
The error don't always look the same, here is another example:
A *** ERROR => Syntax error in program SAPLSALC [abgen.c 1388]
A *** ERROR => > Include LSALCU54 line 55 [abgen.c 1390]
A *** ERROR => > No component exists with the name "MTSYSIDâu2018MTMCNAMEâu2018MTNUMRANGEâu2018MTUIDâu2018". "MTSYSID [abgen.c 1393]
A *** ERROR => > âu2018MTMCNAMEâu2018MTNUMRANGEâu2018MTUIDâu2018". [abgen.c 1395]
The common thing is Syntax error. If we try to log in to the system using SAP Gui we get this message: "Syntax error in program SAPMS380".
In the file dev_disp we can read a lot of these:
Tue Nov 11 14:06:32 2008
*** WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
But we should have enough WP since noone has loggen on to the system.
Facts:
Tue Nov 11 14:06:07 2008
kernel runs with dp version 138000(ext=102000) (@(#) DPLIB-INT-VERSION-138000-UC)
length of sys_adm_ext is 524 bytes
sysno 60
sid S01
systemid 274 (HP (IA-64) with HP-UX)
relno 6400
patchlevel 0
patchno 258
intno 20020600
make: single threaded, Unicode, 64 bit
pid 20538
HPUX on Intel IA64 with Oracle 10.0.2.0.2
SAP ERP Central Component 5.0
SAP_ABA 640 0021 SAPKA64021
SAP_BASIS640 0021 SAPKB64021
Please let me know that there is some small setting that I can change to regenerate the programs or something like that...
Br Linus HellsingHello Ralph
Here they are:
TOC files
SAPAPPL0.TOC:
vn: R6.40/V1.4
id: 084ac0df0000003d
cp: 4102
data_with_checksum
tab: [HEADER]
fil: SAPAPPL0.001 1024
SAPAPPL1.TOC:
vn: R6.40/V1.4
id: 084ac0df0000003d
cp: 4102
data_with_checksum
tab: [HEADER]
fil: SAPAPPL1.001 1024
EXPORT log:
SAPAPPL0.log
/sapmnt/S01/exe/R3load: START OF LOG: 20081029110702
/sapmnt/S01/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
/sapmnt/S01/exe/R3load: version R6.40/V1.4
Compiled Aug 16 2008 18:01:48
/sapmnt/S01/exe/R3load -ctf E /mnt/s01_exp_uni/DATA/SAPAPPL0.STR /mnt/s01_exp_uni/DB/DDLORA.TPL /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL0.TSK ORA -l /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL0.log
/sapmnt/S01/exe/R3load: job completed
/sapmnt/S01/exe/R3load: END OF LOG: 20081029110703
/sapmnt/S01/exe/R3load: START OF LOG: 20081029110709
/sapmnt/S01/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
/sapmnt/S01/exe/R3load: version R6.40/V1.4
Compiled Aug 16 2008 18:01:48
/sapmnt/S01/exe/R3load -datacodepage 4102 -e /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL0.cmd -l /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL0.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(EXP) INFO: check NameTab widths: Ok.
(DB) INFO: Export without hintfile
(RSCP) INFO: UMGCOMCHAR read check, OK.
(RSCP) INFO: init SUMG interface; package name: "SAPAPPL0".
(RSCP) INFO: "/mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL0001.xml" created.
(RSCP) INFO: environemnt variable "I18N_POOL_WIDTH" is not set. Checks are active.
(RSCP) INFO: I18N_NAMETAB_TIMESTAMPS not in env: checks are ON (Note 738858)
(RSCP) INFO: UMGSETTINGS nametab creation: ok.
(RSCP) INFO: Global fallback code page = 9491
(RSCP) INFO: Common character set is not 7-bit-ASCII
(RSCP) INFO: Collision resolution method is 'fine'
(RSCP) INFO: R3trans code pages = Normal
(RSCP) INFO: EXPORT TO ... code pages = Normal
(RSCP) INFO: Check for invalid language keys: activated
(RSCP) INFO: I18N_NAMETAB_NORM_ALLOW = 999999999
(RSCP) INFO: I18N_NAMETAB_NORM_LOG = 1000000002
(RSCP) INFO: I18N_NAMETAB_ALT_ALLOW = 10000
(RSCP) INFO: I18N_NAMETAB_ALT_LOG = 10003
(RSCP) INFO: I18N_NAMETAB_OLD_ALLOW = 0
(RSCP) INFO: I18N_NAMETAB_OLD_LOG = 500
(GSI) INFO: dbname = "S0120081016081020 "
(GSI) INFO: vname = "ORACLE "
(GSI) INFO: hostname = "scar "
(GSI) INFO: sysname = "HP-UX"
(GSI) INFO: nodename = "scar"
(GSI) INFO: release = "B.11.23"
(GSI) INFO: version = "U"
(GSI) INFO: machine = "ia64"
(GSI) INFO: instno = "1220008646"
(EXP) TABLE: "/BDL/LOCK"
(EXP) TABLE: "/BEV1/BO_CONT"
(EXP) TABLE: "/BEV1/BO_ENQUEUE"
(EXP) TABLE: "/BEV1/CLCONT1"
(EXP) TABLE: "/BEV1/CLDEB"
and so on
(EXP) TABLE: "ADR9S2"
(CNV) WARNING: code page conversion problem
Number of substitutions: 4
(row 30 of current buffer, table ADRC)
CLIENT 30 30 30 |000 |
ADDRNUMBER 30 30 30 30 30 31 34 38 36 39 |0000014869 |
DATE_FROM 30 30 30 31 30 31 30 31 |00010101 |
NATION 20 | |
(CNV) WARNING: code page conversion problem
Number of substitutions: 2
(row 41 of current buffer, table ADRC)
CLIENT 30 30 30 |000 |
ADDRNUMBER 30 30 30 30 30 32 31 39 38 32 |0000021982 |
DATE_FROM 30 30 30 31 30 31 30 31 |00010101 |
NATION 20 | |
(RSCP) INFO: 51 lines written to /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL0001.xml
(EXP) TABLE: "ADRC"
(RSCP) INFO: 3 lines written to /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL0001.xml
(EXP) TABLE: "ADRCOMC"
and then its the same with table SETHEADERT and SKAT and SNAP and STXH.
I will not include the whole file as it is 14213 lines long.
SAPAPPL1.log
/sapmnt/S01/exe/R3load: START OF LOG: 20081029110701
/sapmnt/S01/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
/sapmnt/S01/exe/R3load: version R6.40/V1.4
Compiled Aug 16 2008 18:01:48
/sapmnt/S01/exe/R3load -ctf E /mnt/s01_exp_uni/DATA/SAPAPPL1.STR /mnt/s01_exp_uni/DB/DDLORA.TPL /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL1.TSK ORA -l /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL1.log
/sapmnt/S01/exe/R3load: job completed
/sapmnt/S01/exe/R3load: END OF LOG: 20081029110702
/sapmnt/S01/exe/R3load: START OF LOG: 20081029110709
/sapmnt/S01/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
/sapmnt/S01/exe/R3load: version R6.40/V1.4
Compiled Aug 16 2008 18:01:48
/sapmnt/S01/exe/R3load -datacodepage 4102 -e /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL1.cmd -l /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL1.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(EXP) INFO: check NameTab widths: Ok.
(DB) INFO: Export without hintfile
(RSCP) INFO: UMGCOMCHAR read check, OK.
(RSCP) INFO: init SUMG interface; package name: "SAPAPPL1".
(RSCP) INFO: "/mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL1001.xml" created.
(RSCP) INFO: environemnt variable "I18N_POOL_WIDTH" is not set. Checks are active.
(RSCP) INFO: I18N_NAMETAB_TIMESTAMPS not in env: checks are ON (Note 738858)
(RSCP) INFO: UMGSETTINGS nametab creation: ok.
(RSCP) INFO: Global fallback code page = 9491
(RSCP) INFO: Common character set is not 7-bit-ASCII
(RSCP) INFO: Collision resolution method is 'fine'
(RSCP) INFO: R3trans code pages = Normal
(RSCP) INFO: EXPORT TO ... code pages = Normal
(RSCP) INFO: Check for invalid language keys: activated
(RSCP) INFO: I18N_NAMETAB_NORM_ALLOW = 999999999
(RSCP) INFO: I18N_NAMETAB_NORM_LOG = 1000000002
(RSCP) INFO: I18N_NAMETAB_ALT_ALLOW = 10000
(RSCP) INFO: I18N_NAMETAB_ALT_LOG = 10003
(RSCP) INFO: I18N_NAMETAB_OLD_ALLOW = 0
(RSCP) INFO: I18N_NAMETAB_OLD_LOG = 500
(GSI) INFO: dbname = "S0120081016081020 "
(GSI) INFO: vname = "ORACLE "
(GSI) INFO: hostname = "scar "
(GSI) INFO: sysname = "HP-UX"
(GSI) INFO: nodename = "scar"
(GSI) INFO: release = "B.11.23"
(GSI) INFO: version = "U"
(GSI) INFO: machine = "ia64"
(GSI) INFO: instno = "1220008646"
(EXP) TABLE: "/BDL/ADDONKEYS"
(EXP) TABLE: "/BDL/BADHOST"
and so on until
(EXP) TABLE: "SEWADATCOL"
(EXP) TABLE: "SFHX"
(CNV) WARNING: code page conversion problem
Number of substitutions: 1
(row 3519 of current buffer, table SFIWP)
LANGU 4a |J |
WORDF 82 41 45 82 a8 82 ad 95 4b 97 56 82 aa 82 a0 82 |.AE.¨..K.V.ª. .|
WORDF c8 82 55 45 82 b7 81 42 20 20 20 20 20 20 20 20 |È.UE.·.B |
WORDF 20 20 20 20 20 20 20 20 | |
and table STERM_TEXT. As before I will not include it all, the log file is 7775 lines long.
IMPORT log
SAPAPPL0.log
/sapmnt/S01/exe/R3load: START OF LOG: 20081106102704
/sapmnt/S01/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
/sapmnt/S01/exe/R3load: version R6.40/V1.4 [UNICODE]
Compiled Aug 16 2008 18:23:56
/sapmnt/S01/exe/R3load -ctf I /mnt/s01_exp_uni/DATA/SAPAPPL0.STR /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/DDLORA.TPL /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL0.TSK ORA -l /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL0.log
/sapmnt/S01/exe/R3load: job completed
/sapmnt/S01/exe/R3load: END OF LOG: 20081106102705
/sapmnt/S01/exe/R3load: START OF LOG: 20081106103529
/sapmnt/S01/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
/sapmnt/S01/exe/R3load: version R6.40/V1.4 [UNICODE]
Compiled Aug 16 2008 18:23:56
/sapmnt/S01/exe/R3load -dbcodepage 4102 -i /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL0.cmd -l /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL0.log -stop_on_error -k 54FB9C39DB
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(GSI) INFO: dbname = "S0120081106091135 "
(GSI) INFO: vname = "ORACLE "
(GSI) INFO: hostname = "scar "
(GSI) INFO: sysname = "HP-UX"
(GSI) INFO: nodename = "scar"
(GSI) INFO: release = "B.11.23"
(GSI) INFO: version = "U"
(GSI) INFO: machine = "ia64"
(DB) INFO: /BDL/LOCK created #20081106103642
(IMP) INFO: import of /BDL/LOCK completed (0 rows) #20081106103642
(DB) INFO: /BDL/LOCK~0 created #20081106103642
(DB) INFO: /BEV1/BO_CONT created #20081106103642
and so on until the end:
(DB) INFO: ZWF_STATUSCHANGE created #20081106173307
(IMP) INFO: import of ZWF_STATUSCHANGE completed (0 rows) #20081106173307
(DB) INFO: ZWF_STATUSCHANGE~0 created #20081106173307
(DB) INFO: disconnected from DB
/sapmnt/S01/exe/R3load: job completed
/sapmnt/S01/exe/R3load: END OF LOG: 20081106173307
/sapmnt/S01/exe/R3load: START OF LOG: 20081107092517
/sapmnt/S01/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
/sapmnt/S01/exe/R3load: version R6.40/V1.4 [UNICODE]
Compiled Aug 16 2008 18:23:56
/sapmnt/S01/exe/R3load -dbcodepage 4102 -i /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL0.cmd -l /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL0.log -stop_on_error -k 54FB9C39DB
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(GSI) INFO: dbname = "S0120081106091135 "
(GSI) INFO: vname = "ORACLE "
(GSI) INFO: hostname = "scar "
(GSI) INFO: sysname = "HP-UX"
(GSI) INFO: nodename = "scar"
(GSI) INFO: release = "B.11.23"
(GSI) INFO: version = "U"
(GSI) INFO: machine = "ia64"
(DB) INFO: disconnected from DB
/sapmnt/S01/exe/R3load: job completed
/sapmnt/S01/exe/R3load: END OF LOG: 20081107092541
/sapmnt/S01/exe/R3load: START OF LOG: 20081107111014
/sapmnt/S01/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
/sapmnt/S01/exe/R3load: version R6.40/V1.4 [UNICODE]
Compiled Aug 16 2008 18:23:56
/sapmnt/S01/exe/R3load -dbcodepage 4102 -i /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL0.cmd -l /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL0.log -stop_on_error -k 54FB9C39DB
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(GSI) INFO: dbname = "S0120081106091135 "
(GSI) INFO: vname = "ORACLE "
(GSI) INFO: hostname = "scar "
(GSI) INFO: sysname = "HP-UX"
(GSI) INFO: nodename = "scar"
(GSI) INFO: release = "B.11.23"
(GSI) INFO: version = "U"
(GSI) INFO: machine = "ia64"
(DB) INFO: disconnected from DB
/sapmnt/S01/exe/R3load: job completed
/sapmnt/S01/exe/R3load: END OF LOG: 20081107111041
The log file is 81163 lines long.
SAPAPPL1.log
/sapmnt/S01/exe/R3load: START OF LOG: 20081106102702
/sapmnt/S01/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
/sapmnt/S01/exe/R3load: version R6.40/V1.4 [UNICODE]
Compiled Aug 16 2008 18:23:56
/sapmnt/S01/exe/R3load -ctf I /mnt/s01_exp_uni/DATA/SAPAPPL1.STR /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/DDLORA.TPL /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL1.TSK ORA -l /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL1.log
/sapmnt/S01/exe/R3load: job completed
/sapmnt/S01/exe/R3load: END OF LOG: 20081106102703
/sapmnt/S01/exe/R3load: START OF LOG: 20081106103529
/sapmnt/S01/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
/sapmnt/S01/exe/R3load: version R6.40/V1.4 [UNICODE]
Compiled Aug 16 2008 18:23:56
/sapmnt/S01/exe/R3load -dbcodepage 4102 -i /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL1.cmd -l /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL1.log -stop_on_error -k 54FB9C39DB
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(GSI) INFO: dbname = "S0120081106091135 "
(GSI) INFO: vname = "ORACLE "
(GSI) INFO: hostname = "scar "
(GSI) INFO: sysname = "HP-UX"
(GSI) INFO: nodename = "scar"
(GSI) INFO: release = "B.11.23"
(GSI) INFO: version = "U"
(GSI) INFO: machine = "ia64"
(DB) INFO: /BDL/ADDONKEYS created #20081106103603
(IMP) INFO: import of /BDL/ADDONKEYS completed (0 rows) #20081106103603
(DB) INFO: /BDL/ADDONKEYS~0 created #20081106103603
(DB) INFO: /BDL/BADHOST created #20081106103603
(IMP) INFO: import of /BDL/BADHOST completed (0 rows) #20081106103603
(DB) INFO: /BDL/BADHOST~0 created #20081106103603
And so on until the end:
(DB) INFO: ZWF_INVH created #20081107211801
(IMP) INFO: import of ZWF_INVH completed (116640 rows) #20081107211817
(DB) INFO: ZWF_INVH~0 created #20081107211818
(DB) INFO: ZWF_INVI created #20081107211818
(IMP) INFO: import of ZWF_INVI completed (20557 rows) #20081107211820
(DB) INFO: ZWF_INVI~0 created #20081107211820
(DB) INFO: disconnected from DB
/sapmnt/S01/exe/R3load: job completed
/sapmnt/S01/exe/R3load: END OF LOG: 20081107211820
The log file is 52583 lines long.
There are 55 import log files and 28 export log files.
I hope some of this information is helpful for you and thank you again for your assistance!
Br Linus Hellsing -
Tried to install OS X Yosemite on my MacBook. Got message that it could not be installed on my computer due to error while extracting files from package "Essentials.pkg". When i quit the installer as recommended it goes in a loop and gets stuck.
Hey corrafromlondon,
Thanks for the question. After reviewing your post, it sounds like the installer file isn't working. Have you tried deleting the installer and redownloading the installer? I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
How to install OS X Yosemite on your Mac - Apple Support
you can find the Yosemite installer app in your Applications folder or Launchpad.
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
ERROR WHILE SYSTEM EXPORT (BEK) ERROR: SAPSYSTEMNAME not in environment
HI ALL,
we have started migration of ecc6.0 from windows (mssql) to linux(maxdb).
While taking export abap all the export packages are ended with same error .
I have set the envirornment variables . even though i am getting the same error.here i paste the log of 'TODIR' export package:
All the export abap package job ended with same error so i pasted only one package log.
E:\usr\sap\DE5\SYS\exe\run\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#21 $ SAP
E:\usr\sap\DE5\SYS\exe\run\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled May 3 2010 23:35:53
E:\usr\sap\DE5\SYS\exe\run\R3load.exe -e TODIR.cmd -datacodepage 4103 -l TODIR.log -stop_on_error (DB) INFO: connected to DB (DB)
INFO: Export without hintfile (RD)
ERROR: unexpected end of file "F:\mexico_latest_export\ABAP\DATA\TODIR.TOC" (WTF)
INFO: expected error, don't panic ... (GSI)
INFO: dbname = "DE5MEXICO " (GSI)
INFO: vname = "MSSQL " (GSI)
INFO: hostname = "MEXICO " (GSI)
INFO: sysname = "Windows NT" (GSI)
INFO: release = "5.2" (GSI)
INFO: version = "3790 Service Pack 2" (GSI)
INFO: machine = "2x Intel 80686 (Mod 23 Step 8)"
(BEK) ERROR: SAPSYSTEMNAME not in environment
E:\usr\sap\DE5\SYS\exe\run\R3load.exe: job finished with 1 error(s)
E:\usr\sap\DE5\SYS\exe\run\R3load.exe: END OF LOG: 2011051008
Can any one please help me in solving this issue.
Thanks in advance.
VardhanHi Markus,
Thanks for the reply.
I am taking Export with Administrator.
Could you please tell me how to define SAPSYSTEMNAME .
I can define the envirornment variables.
But how i mean how would be the format of defining the SAPSYSTEMNAME variable.
Thanks!
Vardhan. -
Error while running data manager package
Hi All,
when i am running data manager package for currency conversion i am getting the following error
"An exception with the type CX_SY_CREATE_DATA_ERROR occurred, but was neither handled locally, nor declared in a RAISING clause
The data object could not be created: The type /B28/MHED7W9U does not exist."
Plase suggest where i am making mistake.
ThanksBelow are our BPC versions:
BPC on Server Manager: 5.0.486
Data Manager from eData: 5.0.484
BPC from eTool: 5.0.486
Below is the total error message as per your suggestion to run Export package. (even with service account which we used to install the software we are getting same error message.)
TOTAL STEPS 2
1. Dump Data: Failed in 0 sec.
[Selection]
FILE=\ApShell_SK\FINANCE\DataManager\DataFiles\SKTEST.TXT
TRANSFORMATION=\ApShell_SK\FINANCE\DataManager\TransformationFiles\System Files\Export.xls
MEASURENAME=PERIODIC
(Member Selection)
Category: ACTUAL
Time: 2006.JAN
Entity:
Account:
DataSrc:
IntCo:
RptCurrency:
[Messages]
An error occurred while executing a package.
Package Error Events:
ErrorCode = -1073668060
Source = Dump Data
SubComponent=
Description = The task "Dump Data" cannot run on this edition of Integration Services. It requires a higher level edition.
IDOfInterfaceWithError= {8BDFE889-E9D8-4D23-9739-DA807BCDC2AC} -
R3load system copy: Error on database export
Hello all,
I am trying to do a system copy via r3load - Export and then import on a WAS 640 oracle Netweaver based system which has both ABAP and JAVA stack. The source and target system are on the same win2000 host. I am getting below errors in the export stage of the system copy. I am following the sap doc: Homogeneous and Heterogeneous System Copy for SAP Systems based on SAP Web AS ABAP 6.40 SR1 .pdf
As per the doc the below are the main steps
1) Generate DLL-statements [Page 55] (Call transaction SE38 and run the program SMIGR_CREATE_DDL...Execute the program. The DDL statements are generated and are written to thespecified directory.)
2) Run SAPinst to export the database [Page 48].
3) Set up the target system [Page 60].
I am stuck at 2) with the below errors during the export.
For step 2, the sapinst asked me to enter
source <SID>
Source <DBSID>
Source schema: I gave this as SAP<SID>
no of process and alphabetic load.
Afer this...
R3ldctlExport.log reports the below errors
WARNING: no technical settings for table "WFQUE" in SAP data dictionary - defaults used
WARNING: no technical settings for table "WFSTO" in SAP data dictionary - defaults used
WARNING: value for DD28S.CONSTANTS not in quotes, view "COVMVSVW"
WARNING: value for DD28S.CONSTANTS not in quotes, view "DVTOPAY"
WARNING: value for DD28S.CONSTANTS not in quotes, view "V_LTDX"
WARNING: value for DD28S.CONSTANTS not in quotes, view "W3TEMPLATE"
DbSl Trace: ORA-24508 occured when executing SQL statement (parse error offset = 29)
ERROR: ExeRead for get_loc_table_inf failed
ORA-24508: Message 24508 not found; product=RDBMS; facility=ORA
Error generating DDLINF.TPL
(UPT) Info: Preparing tables and tablespace entries.
(UPT) Info: Distributing tables and tablespace entries.
(WLL) Info: finished writing location lists
And sapinst reports several of the below errors...
ERROR 2007-06-17 17:24:14
MSC-01015 Process finished with error(s), check log file D:\Program Files\sapinst_instdir\NW04SR1\WEBAS_ABAP_ORA_UC\EXP/SAPUSER.log
ERROR 2007-06-17 17:22:44
MSC-01015 Process finished with error(s), check log file D:\Program Files\sapinst_instdir\NW04SR1\WEBAS_ABAP_ORA_UC\EXP/SAPDODS.log
ERROR 2007-06-17 17:22:44
MSC-01015 Process finished with error(s), check log file D:\Program Files\sapinst_instdir\NW04SR1\WEBAS_ABAP_ORA_UC\EXP/SAPPOOL.log
ERROR 2007-06-17 17:22:44
MSC-01015 Process finished with error(s), check log file D:\Program Files\sapinst_instdir\NW04SR1\WEBAS_ABAP_ORA_UC\EXP/SAPSDIC.log
...etc
*.TSK files are being created.
For example, if I describe for one particular package...
SAPSSEXC.TSK has entries like the below
D DM45T E ok
D DM46S E ok
D DOKCLU E err
D DOKHL E xeq
D DOKIL E xeq
D DSYST E xeq
D DYNPSOURCE E xeq
D ENLFDIR E xeq
D EUDB E xeq
D EUGUITEXT E xeq
D EUOBJ E xeq
D EUOBJEDIT E xeq
A log file SAPSSEXC.log exists which notes the termination of the r3load export process.
EXP) TABLE: "DM42S"
(EXP) TABLE: "DM42T"
(EXP) TABLE: "DM43T"
(EXP) TABLE: "DM45L"
(EXP) TABLE: "DM45T"
(EXP) TABLE: "DM46S"
(NT) Error: DOKCLU : normal NameTab from 20041108162211 younger than alternate NameTab from 20010201171049!
Syslog: k CQF : DOKCLU &20010201171049&2004110rscpgdio 47myCluster (55.13.Exp): 874: received return code 64 from rscpCheckNTTimeStamps.
myCluster (55.13.Exp): 875: suspicious create timestamp of alternate nametab encountered.
myCluster (55.13.Exp): 879: create timestamps of nametab: 20041108162211; alternate nametab: 20010201171049.
myCluster (55.13.Exp): 297: error when retrieving physical nametab for table DOKCLU.
(CNV) ERROR: code page conversion failed
rc = 2
.--============.| RSCP - Error || Error from: Codepage handling (RSCP) 3 || code: 64 RSCPECALL Illegal mixture of procedure calls. || Altername NameTab too old || module: rscpgdio no: 47 line: 2876 T100: TS007 || TSL01: CQF p3: DOKCLU &20010201171049&2004110|| |`--
'(rscpMC) Warn: env I18N_NAMETAB_TIMESTAMPS not set
(DB) INFO: disconnected from DB
I:\usr\sap\VIK\SYS\exe\run/R3load.exe: job finished with 1 error(s)
I:\usr\sap\VIK\SYS\exe\run/R3load.exe: END OF LOG: 20070617185123
Also some of the other log files for other packages terminate with:" disconnected from db" in the middle of the export.
What I tried: I tried putting in the latest patch level for r3ldctl, r3load and r3szchk kernel files. It was at kernel patch 43. I upgraded to latest 175 from market place. And restarted sapinst again to start the export again. Again I face the same problem. Sapinst aborts at this stage again. I basically took the whole sapexedb patch 175 and yupdated the kernel but it did not help.
If any of you out there can lead me in the right direction so that I can get over this stumbling block, would be grateful.
Many Thanks, Vikram
[email protected]Could anybody please tell what is the required codepage for oracle?
Our system has NLS_LANG=AMERICAN_AMERICA.WE8DEC
Thanks a lot! -
Error while creating a setup package .
Hi ALL,
We are trying to create a setup package (SP20 client) for our application
after assinging the device configurations their roles and conditions to the Hierarchy Group which we created It gives the following error while creation of the setup package
Error
0050 tc.mobile.admin.bl 113101 20080222
Retrieving device id failed.
However we tried to dig up for it in help.sap.com and forum we could not resolve the error .
Please suggests the neccessary solution,Its urgent.
Thanks & Regards
Aditi VyasHI
This problem is already resolved in SP20. Kindly make use of the latest patch of NWMADMIN and NWMClient and the error should get resolved.
Best regards
Sivakumar -
Error while running legal consolidation package RUNCONSOL
Hi All
I have below error while i run the consolidation package can anyone throw light on the same
Start time --->5:17:46 PM - Date:1/6/2009 (build code:254)
User:BPCDEV\bpcadmin
Appset:FTIL
App:LEGALAPP
Logic mode:1
Logic by:
Scope by:
Data File:
Debug File:D:\BPC\Data\WebFolders\FTIL\LEGALAPP
..\AdminApp\LEGALAPP\LegalConsolidation.txt
Logic File:D:\BPC\Data\WebFolders\FTIL\LEGALAPP
..\AdminApp\LEGALAPP\LegalConsolidation.lgx
Selection:D:\BPC\Data\WebFolders\FTIL\LEGALAPP\PrivatePublications\bpcadmin\TempFiles\FROM_81_.TMP
Run mode:1
Query size:0
Delim:,
Query type:0
Simulation:0
Calc diff.:0
Formula script:
Max Members:
Test mode:0
Is Modelling:1
Number of logic calls:1
Call no. 1, logic:D:\BPC\Data\WebFolders\FTIL\LEGALAPP
..\AdminApp\LEGALAPP\LegalConsolidation.lgx
Building sub-query 1
Query Type:0
Max members:
Executing SPRUNCONSO [LEGALAPP], [ACTUAL], [C_FTILG], [SPSCOPE_200127],[SPLOG_282986]
SPRunConso Version 2.06
ERROR CSD-015 No instruction retreived from the ELIM Table with FLOW Dimension
Time to run stored procedure:1.6 sec.
call 1 completed and data posted in 1.6 sec.
Run completed in 1.8 sec.
End time --->5:17:48 PM - Date:1/6/2009
SPRunConso Version 2.06
ERROR CSD-015 No instruction retreived from the ELIM Table with FLOW Dimension
Thanks and Regards
Harish B KHi this was due to not maintaining proper design and it was solved later once we setup all the parameters perfectly
and had time dimension members for one year prior (though seems strange) -
Error while deploying the Bussiness package in CE 7.1 SP5
Hi All,
I am facing the problem while deploying the Bussiness package. The same bussiness package has been deployed on EP 7.0 using SDM. In CE 7.1 while deploying the package we are getting error. Please check the log.
-- Deployment Items -
1. Client path '
\sapmnt\trans\EPS\in\BPERP5COM03_0-10004453.SCA\DEPLOYARCHIVES\tc~sl.ut.content.erp.bp_erp.sda'
Sdu info :name 'tc~sl.ut.content.erp.bp_erp', vendor 'sap.com', location 'MAIN_ERP52VAL_C', version '1592825', software type ('J2EE', sub type ''), dependencies :[none]
Deploy status is 'Aborted'
Time statistics( ms ):
1.validate : -1
1.1.deployment : 218
1.1.1.Notify:Event triggered : 15
1.1.2.Disable LCM deployment : 203
1.1.2.1.Perform delivery : 203
1.1.2.1.1.Application Deployer : 203
Description:'1. [ERROR CODE DPL.DS.6193] Error while ; nested exception is:
com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5082] Exception while validating application sap.com/tc~sl.ut.content.erp.bp_erp.
No one of the [developmentserver, com.sap.security.login-modules] containers, which processed it, returned deployed component names.
The registered containers in this moment were [CTCContainer, com.sap.security.ume, developmentserver, com.sap.security.login-modules, app_libraries_container, Cache Configuration Upload, servlet_jsp, dbcontentcontainer, connector, Cluster File System, JMSConnector, MigrationContainer, Monitoring Configurator, dbschemacontainer, appclient, orpersistence, PortalRuntimeContainer, SAP-EU-GP, JDBCConnector, EJBContainer, metamodelrepository, webservices_container, scheduler~container, ConfigurationsContainer, Content Container].
Possible reasons :
1.An AS Java service, which is providing a container, is stopped or not deployed.
2.The containers, which processed it, are not implemented correct. They deployed or started initially the application, but didn't return deployed components in the application deployment info.'.
I have checked all the services in NWA, they are all running fine but one of the service is not available com.sap.security.login-modules and also in the log file it is saying that nested exeception.
I am Basis consultant i couldnt able to get what is nested exception.
How to undeploy the packages?
In CE there is no SDM is there any alternative tool to undeploy and deploy the Packages like SDM other JSPM.
Please guide on this.
Thanks in Advance.
Mahesh CHi,
You can undeploy using the IDE itself.
1. Go to Deploy perspective (Window>open perpective>other-->Deploy)
2. There u can select Deploy view or undeploy view.
Regards,
Srinivasan Subbiah -
Getting an error while importing/exporting the universe from my BO Designer
Hi,
I am facing a issue while importing/exporting the universe from my BO Designer to the Server.The error is mentioned below.
'File Repository Server Input is down'
Once I click the OK button on this error message, it displays the message
'Could not import the Universe'.
I tried the check the status of the File Repository Server (Ouput and Input) and also the of the Root Directory on the Physical Server and also my machine.They all have read-write access.
Installed Version of the Universe Designer Client: Business Object XI Release 2 SP3
Installed Version of the BO Enterprise Server: Business Object XI Release 2 SP2
Can you please help me to resolve the issueHi,
The step you have mentioned may not be applicable to my issue as one of my colleagues can import/export the universe from the same server
The second thing is that a DB2 Client v9 is installed on both mine and my colleagues system.The Designer software can recognise the DB2 drivers on his system but it cannot recognise the same drivers on my system.I even checked the versions of the BO software installed on his and my system and they are same.
The only difference is that his machine is a Windows XP Machine and mine is a Network Desktop.
Will any of the above two things will affect the operation of the BO Designer.
Thanks
Prabhakar Korada -
Hi Guys,
While Client export with any profile Background work process stop reason is RFC. system in single system landscape. I want export client profile through SCC8 only. please solve my problem
Regards
GaneshHello Ganesh,
I had received the same kind of error once, we applied the following workaround
Execute the client export in foreground. The client export at SAP level won't take much time and would get completed quickly.
BUT yes, this does NOT mean that the Co-files & Datafiles are generated quickly.
You will notice, that the file size & timestamp of cofile & datafile being updated. Once the timestap of the co-files & datafile stops you can be sure that the client export has completed.
Incase you still want to find the RCA of your problem, please send us the export log details.
Regards,
Ammey Kesarkar -
Error while monitoring the Info Package
Hi,
While monitoring the info package, I'm having the following errors:(The data source is of type standard R3 Datasource).
" Error when updating Idocs in Source System
Diagnosis
Errors have been reported in Source System during IDoc update:
System Response
Some IDocs have error status.
Procedure
Check the IDocs in Source System . You do this using the extraction monitor.
Error handling:
How you resolve the errors depends on the error message you get. "
pls help me in this...
With regards,
Yokesh.Hi Yokesh,
Try these to solve your issue,
tRFC Error - status running Yellow for long time (Transact RFC will be enabled in Status tab in RSMO).
Step 1: Goto Details, Status get the IDoc number,and go to BD87 in R/3,place the cursor in the RED IDoc entroes in tRFC
queue thats under outbound processing and click on display the IDOC which is on the menu bar.
Step 2: In the next screen click on Display tRFC calls (will take you to SM58 particular TRFC call)
place the cursor on the particular Transaction ID and go to EDIT in the menu bar --> press 'Execute LUW'
(Display tRFC calls (will take you to SM58 particular TRFC call) ---> select the TrasnID ---> EDIT ---> Execute LUW)
Rather than going to SM58 and executing LUW directly it is safer to go through BD87 giving the IDOC name as it will take you
to the particular TRFC request for that Idoc.
OR
Go into the JOB Overview of the Load there you should be able to find the Data Package ID.
(For this in RSMO Screen> Environment> there is a option for Job overview.)
This Data Package TID is Transaction ID in SM58.
OR
SM58 > Give * / user name or background (Aleremote) user name and execute.It will show you all the pending TRFC with
Transaction ID.
In the Status Text column you can see two status
Transation Recorded and Transaction Executing
Don't disturb, if the status is second one Transaction Executing. If the status is first one (Transation Recorded) manually
execute the "Execute LUWs"
OR
Directly go to SM58 > Give * / user name or background (Aleremote) user name and execute. It will show TRFCs to be executed
for that user. Find the particular TRFC (SM37 > Req name > TID from data packet with sysfail).select the TrasnID (SM58) --->
EDIT ---> Execute LUW
OR
In RSMO, select the particular load you want to monitor.
In the menu bar, Environment >>> Transact. RFC >>> Select whichever is required, BW or Source System.
In the next screen you can select the Execute button and the IDOCS will be displayed.
Hope it helps
Regards,
Arun.M.D -
Error while openign the info Package
Hi , i am getting the following short dump error while trying to open the info package. these are the Ipaks which were in use before but now getting short dump after R/3 upgrade.
Can you please help me
"MESSAGE_TYPE_X" C
"SAPLRSS1" or "LRSS1F11"
"RSM1_CHECK_FOR_DELTAUPD"
Thanks.Hi Chris,
Please check OSS note: 852443 - Dump in include LRSSMU36/RSSM_OLTPSOURCE_SELECTIONS
There are also a couple of threads here talking about the same problem.
Hope this helps... -
Error while creating procedure and package
Hi,
I am getting an error while creating an procedure
create or replace procedure mke_test (mke_gender varchar2) is
begin
declare global temporary table mag_hotline_glob
INDIVIDUAL_ID NUMBER,
ONE_MONTH NUMBER,
THREE_MONTH NUMBER,
SIX_MONTH NUMBER,
TWELVE_MONTH NUMBER,
CHILDREN_PRES VARCHAR2(1 BYTE)
) with replace on commit preserve rows not logged;
begin
insert into mag_hotline_glob
select * from magazine_gender;
end;
end;
can anybody plz suggestIt's a total mess. You need to read the documentation first.
Create your table separately
CREATE global temporary table mag_hotline_glob(INDIVIDUAL_ID NUMBER,
ONE_MONTH NUMBER,
THREE_MONTH NUMBER,
SIX_MONTH NUMBER,
TWELVE_MONTH NUMBER,
CHILDREN_PRES VARCHAR2(1 BYTE)) with replace on commit preserve rows not logged;Then use the procedure (I don't know why, this INSERT statement you can fire yourself)
create or replace procedure mke_test(mke_gender varchar2) is
begin
insert into mag_hotline_glob
select * from magazine_gender;
end;If you want to create the GTT inside the procedure(should be avoided) then Use EXECUTE IMMEDIATE.
By the way, where are you using the IN parameter ? It' unnecessary. -
Error while running the SSIS package from SQL DB to excel file - export option
hi all,
I have 4.6 million records in my sql db and i want to copy this into a excel file. for this i went to the db and rt click and export to command and started the ssis package running. but after
few minutes, it throws me an error that "error in transferring data into excel file."
Can anyone help me why this happened and the resolution ?
help is appreciated!
Copying to `excel1_Wbook` (Error)
Messages
Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x8007000E.
(SQL Server Import and Export Wizard)
Error 0xc0047022: Data Flow Task 1: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Destination - excel1_Wbook" (217) failed with error code 0xC0202009 while processing input "Destination Input" (228).
The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information
about the failure.
(SQL Server Import and Export Wizard)
Error 0xc02020c4: Data Flow Task 1: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
(SQL Server Import and Export Wizard)
Error 0xc0047038: Data Flow Task 1: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on Source - excel1_Wbook returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The
meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)You need to split your data and create (at least 5) worksheet targets.
For example if you have a ROW_NUMBER column you can use for instance a
Conditional Split for something like:
ROW_NUMBER % 5 == 0 for Case 1 (excel 1)
ROW_NUMBER % 5 == 1 for Case 2 (excel 2)
ROW_NUMBER % 5 == 2 for Case 3 (excel 3)
ROW_NUMBER % 5 == 3 for Case 4 (excel 4)
ROW_NUMBER % 5 == 4 for Case 5 (excel 5)
Maybe you are looking for
-
Oracle Service Bus 10.3.1 proxy consuming jms (AQJMS)
Hi, I need to use AQJMS with Oracle Service Bus proxy. We have an installation with WLS 10.3 and OSB 10.3.1 and another with WLS 10.3.1 where I defined a JMS Foreign Server like appears in the documentation http://download.oracle.com/docs/cd/E12839_0
-
Generate barcode image in 10g Reports
Hi, I have installed *10g Application server* on linux machine I want to show my employee code as barcode on a report Please help me out i shall be very thankfull to you. Regards, Zafar
-
In some site collections old user accounts are not replacing after stsadm migrateuser
Hi, When running stsadm migrate user that actually not replacing the old account for some users in the site collection. Any idea please?
-
Hi friends, We have installed xRPM 4.5. And we are in the process of activating the templates for it. For that we have been asked to access RSA1 tcode.we did the same through our client 500 bit it thrown an error like should be accessed only through
-
ITunes acts weird when syncronizing.
All of the songs in my iTunes library are on my fifth generation iPod. When I sync to iTunes it seems to remove about 100-105 song then re-syncs them to my iPod, the songs are always still on my iPod they aren't missing after this odd occurrence. It