Error while editing the item condition data : urgent
Hi,
I am using a bdc. when i try to edit any of the item condition value (KBETR) and also if i try to insert a new condition , I am getting error as " Message_type_X " and the message no :00341, and the BDC is terminating at the point.
Can anybody kindly suggest a work around
shyam
Hi Shyam,
Try with this code.
*-----Adding the Condition Types at item level
PERFORM bdc_dynpro USING 'SAPMV45A' '5003'.
PERFORM bdc_field USING 'BDC_CURSOR' 'KOMV-KSCHL(01)'.
PERFORM bdc_field USING 'BDC_OKCODE' '=V69A_KONY'.
PERFORM bdc_dynpro USING 'SAPMSSY0' '0120'.
PERFORM bdc_field USING 'BDC_CURSOR' '05/04'.
PERFORM bdc_field USING 'BDC_OKCODE' '=PICK'.
*----1. Unitprc ( ZPR0 )
PERFORM bdc_dynpro USING 'SAPMV45A' '5003'.
PERFORM bdc_field USING 'BDC_CURSOR' 'KOMV-KSCHL(01)'.
PERFORM bdc_field USING 'BDC_OKCODE' '=V69A_KOAN'.
PERFORM bdc_dynpro USING 'SAPMV45A' '5003'.
PERFORM bdc_field USING 'BDC_CURSOR' 'KOMV-KBETR(02)'.
WRITE x_item-unitprc TO v_unitprc CURRENCY komv-waers NO-SIGN.
PERFORM bdc_field USING 'KOMV-KSCHL(02)' 'ZPR0'.
PERFORM bdc_field USING 'KOMV-KBETR(02)' v_unitprc.
PERFORM bdc_field USING 'BDC_OKCODE' '/00'.
*-----End of Addition
PERFORM bdc_dynpro USING 'SAPMV45A' '5003'.
PERFORM bdc_field USING 'BDC_OKCODE' '/EBACK'.
Regards,
Aman
Message was edited by:
Amandeep Kumar
Similar Messages
-
Siebel -00284 Error while editing the Custom object Data
I have created one custom object and when i tried to edit the data which i have entered , i am not able to edit the data on Custom object. Could you please suggest me on this. Please find the below error.
You do not have permission to edit the record. Click cancel or Back link to continue.(SBL-DAT-00284)
Edited by: Subbu on Jun 29, 2010 1:57 AMHi Shyam,
Try with this code.
*-----Adding the Condition Types at item level
PERFORM bdc_dynpro USING 'SAPMV45A' '5003'.
PERFORM bdc_field USING 'BDC_CURSOR' 'KOMV-KSCHL(01)'.
PERFORM bdc_field USING 'BDC_OKCODE' '=V69A_KONY'.
PERFORM bdc_dynpro USING 'SAPMSSY0' '0120'.
PERFORM bdc_field USING 'BDC_CURSOR' '05/04'.
PERFORM bdc_field USING 'BDC_OKCODE' '=PICK'.
*----1. Unitprc ( ZPR0 )
PERFORM bdc_dynpro USING 'SAPMV45A' '5003'.
PERFORM bdc_field USING 'BDC_CURSOR' 'KOMV-KSCHL(01)'.
PERFORM bdc_field USING 'BDC_OKCODE' '=V69A_KOAN'.
PERFORM bdc_dynpro USING 'SAPMV45A' '5003'.
PERFORM bdc_field USING 'BDC_CURSOR' 'KOMV-KBETR(02)'.
WRITE x_item-unitprc TO v_unitprc CURRENCY komv-waers NO-SIGN.
PERFORM bdc_field USING 'KOMV-KSCHL(02)' 'ZPR0'.
PERFORM bdc_field USING 'KOMV-KBETR(02)' v_unitprc.
PERFORM bdc_field USING 'BDC_OKCODE' '/00'.
*-----End of Addition
PERFORM bdc_dynpro USING 'SAPMV45A' '5003'.
PERFORM bdc_field USING 'BDC_OKCODE' '/EBACK'.
Regards,
Aman
Message was edited by:
Amandeep Kumar -
Errors while editing the xsl for dataview web part
while modifying a dataview webpart in sharepoint designer, i finding the issues for the below line
<xsl:for-each select="$Rows[substring-before(substring-after(substring-after(@FullName, '?ID='), '>'), '<') = $FullName]">
errors:
the tag is marked invalid because it is missing quote for '>' and '<'
the tag is marked invalid because it has an extra quote ">Hi ,
According to your description, my understanding is that you got an error when you edited the xsl for dataview web part.
Please try to change
<xsl:for-each select="$Rows[substring-before(substring-after(substring-after(@FullName, '?ID='), '>'), '<') = $FullName]">
To
<xsl:for-each select="$Rows[substring-before(substring-after(substring-after(@FullName, '?ID='), '>'), '<') = $FullName]">
Best Regards,
Wendy
Wendy Li
TechNet Community Support -
Error while entering the Final Process Date for an employee
Hi,
I am receiving the below mentioned Error Message when I try to enterthe Final Process date and save for an employee on the End Employment screen.
HR_51746_ASG_INV_ASG_ID (PROCEDURE=pay_us_tax_internal.maintain_tax_percentage)
Please let me know if anyone has an idea on the cause for this error message and how to fix this.
Thanks,
Jithendra
Edited by: user11688089 on Feb 6, 2013 3:11 AMWhat is the termination date on this employee and what Final process date are you using? Are there any payrolls that ran after his/her Term date. Because even though this employee has been terminated a while ago, if there are any payrolls run after that (even if this employee is skipped), the system still includes this emp in that run and doesn't allow you to enter a Final process date prior to that pay date
Either try to use a final process date which is in the next pay period after the latest payroll run or try running deltax.sql (removes tax records) on that assignment and see if that works
-Karthik -
Error while mainitain the pricing ( condition type - j3ap )
Hi,
While i am creating the pricing for an AFS material in T code mek1 ( condition type is j3ap ) i am getting the following error ::
Information 857 Report RV13F002 generated.
Information 711 No Screens are generated.
Information 857 Report RV13F003 generated.
Information 711 No screens are generated
Errors 806 Report RV13F004 has a syntax error
Information 711 No screens are generated.
What is these error?? what setting should i change to correct it ,.
Regards
Rakeshyou can refer to
http://www.triggergroup.org/blog/archives/585 -
Error while editing the project from CJ20
Hi All,
We are working on capital projects, one of our open projects was created in Jan 2010 with ten WBS elements with two levels and in between we have done profit center field as mandatory field in Dec 2010. For the same project initially we didnu2019t assign the profit center, I have released the project and done some partial settlements to final asset. Now I want to assign the profit center to the particular WBS element.
When I am trying to assign the profit center to first level WBS element system is showing an error: u2018Asset xxxxxxxxx is not in Company Code xxxxu2019. If I am trying to assign the profit center to second level WBS system is showing a message: u2018Costs have been posted to WBS element XXX00079.CAP.1u2019, and not accepting, not allowing for saving the project.Hi,
system is throwing valid error that "Profit Center cannot be changed once actual costs are booked"
1. Use Screen Variant for that Particular Old Project & make the Profit Center an optional field.
2. Copy your old Project Profile to a new one & make field selection with influencing field as the new Project Profile (By this, only the new Projects will get your field mandatory effect)
Revert for implications in the above suggestions.
regards -
Error while editing 0585&0586 Infotypes in ess
Hi Folks,
I am getting an error while editing the 0585&0586 infotypes in ess.
When i select the field edit it shows me the record with correct dates (Financial year dates) and when i start edidting the amounts and saving the data it was taking the current date as start date and throws an error saying
Begin date and End date for the infotype must match financial year dates.
A record already exists for the current financial year.
Please help in this regard.
Regards
SIvaHi ,
If you want to edit the Info types -0585&0586.The control reocrd and the info type start period should be in the same fincial year.
Thanks,
Bhaskar -
Access Denied error while editing interactive forms in NWDS
Hi,
I am getting following error while editing the Adobe Interactive form in NWDS, I didnt understand why i am getting this error please help me in this issue
the error i am getting is as follows
java.io.FileNotFoundException: C:\Documents and Settings\my user\Application Data\Adobe\Designer\FormDesigner.ini (Access is denied)
at java.io.RandomAccessFile.open(Native Method)
at java.io.RandomAccessFile.<init>(RandomAccessFile.java:212)
at com.sap.ide.webdynpro.adobetemplatedesigner.internalisation.AdobelanguageSettingService.setAdobeLanguage(AdobelanguageSettingService.java:43)
at com.sap.ide.webdynpro.adobetemplatedesigner.AdobeDesignerEditorPart.createPartControl(AdobeDesignerEditorPart.java:123)
at org.eclipse.ui.internal.EditorReference.createPartHelper(EditorReference.java:661)
at org.eclipse.ui.internal.EditorReference.createPart(EditorReference.java:428)
at org.eclipse.ui.internal.WorkbenchPartReference.getPart(WorkbenchPartReference.java:594)
at org.eclipse.ui.internal.EditorReference.getEditor(EditorReference.java:266)
at org.eclipse.ui.internal.WorkbenchPage.busyOpenEditorBatched(WorkbenchPage.java:2820)
at org.eclipse.ui.internal.WorkbenchPage.busyOpenEditor(WorkbenchPage.java:2729)
at org.eclipse.ui.internal.WorkbenchPage.access$11(WorkbenchPage.java:2721)
at org.eclipse.ui.internal.WorkbenchPage$10.run(WorkbenchPage.java:2673)
at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:70)
at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2668)
at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2652)
at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2635)
at com.sap.ide.webdynpro.adobetemplatedesigner.listener.ViewDesignerActionListener.launchAdobeDesigner(ViewDesignerActionListener.java:73)
at com.sap.ide.webdynpro.adobetemplatedesigner.contentprovider.LaunchDesignerAction.run(LaunchDesignerAction.java:30)
at org.eclipse.ui.internal.PluginAction.runWithEvent(PluginAction.java:251)
at org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection(ActionContributionItem.java:583)
at org.eclipse.jface.action.ActionContributionItem.access$2(ActionContributionItem.java:500)
at org.eclipse.jface.action.ActionContributionItem$5.handleEvent(ActionContributionItem.java:411)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1003)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3823)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3422)
at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2384)
at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2348)
at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2200)
at org.eclipse.ui.internal.Workbench$5.run(Workbench.java:495)
at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:288)
at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:490)
at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:113)
at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:193)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:386)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:549)
at org.eclipse.equinox.launcher.Main.basicRun(Main.java:504)
at org.eclipse.equinox.launcher.Main.run(Main.java:1236)
thanks
AnuHi Anu,
Please check if you have permissions in C:\Documents and Settings\my user\Application Data\Adobe\Designer\FormDesigner.ini
Change "my user" to the actual user.
Best regards, Aldo. -
Error while creating the user mapping
hi friends i was gettig this error while editing the logon data in user mapping.
An exception occurred while processing a request for :
iView : pcd:portal_content/administrator/super_admin/super_admin_role/com.sap.portal.user_administration/com.sap.portal.user_mapping/com.sap.portal.userMappingAdmin/com.sap.portal.userMappingAdmin
Component Name : com.sap.portal.usermanagement.admin.UserMappingAdmin
User Mapping not fully available..
Exception id: 12:54_19/02/07_0002_9709050
See the details for the exception ID in the log fileHi Rajesh,
Navigate to <b>User Administration---->User Mapping</b>
Under Search, Search for your user id in users.
You will get ID, Name with <b>Edit Link</b> and by the side "System" Drop Down Box which contains the name of the system Aliases that u created.
<b>Click on Edit Link,</b> It will ask for user and password. Give the user and password for R/3 System and clicked save. After this you will get an info like, Logon Data Saved.
******Hope this helps you. Reward Points if you find this helpful.
Regards,
Eben. J <i></i><i></i><i></i> -
I've installed SQL Server 2012 SP1 + SP server 2012 + SSRS and PowerPivot add-in.
I also configured excel services correctly. Everything works fine but the powerview doesn't work!
While I open an excel workbook consist of a PowerView report an error occurs: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions
to access the data source."
error detail:
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message xmlns="http://www.microsoft.com/sql/reportingservices">An
error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3128.0</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the
data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'EntityDataSource'.</Message><MoreInformation><Source></Source><Message>For more information about this error navigate
to the report server on the local server machine, or enable remote errors</Message></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices" /></detail>
Please help me to solve this issue. I don't know if uploading the excel workbook is enough or maybe It needed to connect to another data source.
I Appreciate in advance.Hi Ali.y,
Based on the current error message, the error can be related to the
Claims to Windows Token Service (C2WTS) and is an expected error under certain conditions. To verify the issue, please check the aspects below:
1. The C2WTS Windows service and C2WTS SharePoint service are both running.
2. Check the SQL Server Browser service is running on the machine that has the PowerPivot instance of SSAS.
3. Check the domain. You're signing into SharePoint with a user account in some domain (call it Domain A). When Domain A is equal to Domain B which SharePoint server itself is located (they're the same domain), or Domain
A trusts Domain B.
In addition, the error may be caused by Kerberos authentication issue due to missing SPN. In order to make the Kerberos authentication work, you need to configure the Analysis Services to run under a domain account, and register the SPNs for the Analysis
Services server.
To create the SPN for the Analysis Services server that is running under a domain account, run the following commands at a command prompt:
• Setspn.exe -S MSOLAPSvc.3/Fully_Qualified_domainName OLAP_Service_Startup_Account
Note: Fully_Qualified_domainName is a placeholder for the FQDN.
• Setspn.exe -S MSOLAPSvc.3/serverHostName OLAP_Service_Startup_Account
For more information, please see:
How to configure SQL Reporting Services 2012 in SharePoint Server 2010 / 2013 for Kerberos authentication
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support -
An error occurred while loading the model for the item or data source 'EntityDataSource'.
Hi Team,
We are trying to configure the Power View in SharePoint 2013. We did the entire configuration by following below steps. When we open the excel workbook (2013) containing
Power View sheet (using excel web services) deployed in SharePoint Document library, we get the below error.
“An error occurred while loading the model for the item or data source
'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source.”
Steps followed for configuring Power View in SharePoint Server 2013 (Single Machine setup):
Installed SharePoint Server 2013 Enterprise edition
Did not configure it at this time
Installed SQL Server 2012 with default instance installation (selected every features)
Later installed SP1 for SQL Server 2012
After that installed Analysis Server in SharePoint mode (SQL Server PowerPivot for SharePoint)
Again installed another Analysis Server and selected the tabular mode of data model
Then ran the configuration wizard of Share point 2013 for farm configuration (only for central admin creation)
Later we ran the PowerPivot for SharePoint 2013 (spPowerpivot.msi)
Then using the Power Pivot Configuration tool for 2013 and completed all the steps and configured the excel service and registered the above two analysis service instances.
Questions/Doubts are:
Is our steps followed as mentioned above is correct for configuring Power View in SharePoint Server 2013 Enterprise edition?
Is the SQL Server 2012 Enterprise edition with SP1 installed is sufficient to view Power View sheets in SharePoint 2013 or we need to use the SQL Server 2012 SP1
CTP3 software for Power View feature as mentioned in the below link.
http://technet.microsoft.com/en-us/library/jj219634.aspx
but we don’t have an option to download CTP3 software now from Microsoft site
Or do we need to install
Microsoft SQL Server 2012 With Power View For Multidimensional Models
CTP
http://www.microsoft.com/en-sg/download/details.aspx?id=35822
Few blogs says that SQL Server 2012 instance should have been installed with SP1 at one go (not seperately).
http://www.microsoft.com/en-in/download/details.aspx?id=35575
Error detail :
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message
xmlns="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access
the data source.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3000.0</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3000.0</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3000.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access
the data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3000.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'EntityDataSource'.</Message><MoreInformation><Source>Microsoft.AnalysisServices.SPClient</Source><Message>We
cannot locate a server to load the workbook Data Model.</Message><MoreInformation><Source></Source><Message>We cannot locate a server to load the workbook Data Model.</Message><MoreInformation><Source>Microsoft.Office.Excel.Server.WebServices</Source><Message>We
cannot locate a server to load the workbook Data Model.</Message></MoreInformation></MoreInformation></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices"
/></detail>
Please help me in configuring Power View for SharePoint 2013.
Thanks in advance.
Pavan KumarI'll bet that I know the answer to this one - and you probably won't like it ;)
Here's the telling portion of that error: "We cannot locate a server to load the workbook Data Model."
This error is thrown in two scenarios; the first, when you haven't registered an analysis server. The second appears to be the issue you're having:
PowerPivot requires SQL Server 2012 SP1. Microsoft issued a release of SQL Server 2012 SP1 that really wasn't SP1...
Check the version of SQL that you are running. It should be version 11.0.3000 or greater. If it's not, you have the wrong "SP1" installed. The correct one is
here.
Here's the bad news- you can't simply redeploy the correct one... because the installer already thinks that SP1 is installed. You'll have to backup (or detach and copy) your databases, then re-install SQL with the correct SP1, then restore or reattach
the databases. Once you've done that, PowerPivot and PowerView will work properly.
I sincerely hope this resolves your issues - we wasted TWO WEEKS of our time with this problem! -
Error while Editing Item - After importing pagegroup
Hi All,
We have Oracle Application server 10g (10.1.2) with Oracle Portal 10.1.2.0.0. as a test environment in win 2000 server.
We installed a new Oracle Application server 10g (10.1.2) (production) with 10.1.2.0.2 in Suse Linux Enterprise server 9. every thing was fine.
We have migrated one simple page group from source(win) to a new Portal in Linux ( by following the steps of Portal export / import Doc.). This is by exporting transport set, dmp file in source side and importing dmp file and transport set on the target. The import was successful. I checked the Navigator and found the imported page Group. Also all the sub pages and items have been found with proper regions.
But when i'm trying to edit any item,region or adding region,item, it shows the following error. -----------------------
ERROR :General invalidation message processing exception: User-Defined Exception (WWC-40018)
General invalidation message processing exception: Error invalidating content, Non-200 status code returned by Web Cache. Status: 407 Proxy Authentication Required ( The ISA Server requires authorization to fulfill the request. Access to the Web Proxy service is denied. ) (WWC-40018)
Note:Please kindly note that our repository and portal midtier on same machine. So there is no firewall between portal and repository. Also there is no proxy settings given in Portal. Moreover, I reinitialized the webcache invalidator password in both web cache admin and Portal. Nothing is working.
Please kindly help me in this regard urgently. and provide me the solution along with the navigation details.
Thanks in Advance,
Abdullah ShafiHI,
Pls reply me.did your issue resolved regarding webcache wwc-400018 ,same is the problem for me,webachacheadmin and invalidator pages are not working and while editing items in portal does reflect instaed it gives the error
Error
General invalidation message processing exception: An error occurred while closing the HTTP connection after receiving an error while getting the invalidation response from Web Cache: ORA-29273: HTTP request failed
ORA-06512: at "SYS.UTL_HTTP", line 1389
ORA-29261: bad argument
ORA-29273: HTTP request failed
ORA-06512: at "SYS.UTL_HTTP", line 1231
ORA-29259: end-of-input reached (WWC-40018)
General invalidation message processing exception: An error occurred while getting the invalidation response from Web Cache: ORA-29273: HTTP request failed
ORA-06512: at "SYS.UTL_HTTP", line 1231
ORA-29259: end-of-input reached (WWC-40018)
Thanks and Regards,
Azeem. -
ORA-29861 Error while editing or adding search keywords in a File Item
Hi,
We are getting the following error while editing or adding search keywords to a file item:
ORA-29861: domain index is marked LOADING/FAILED/UNUSABLE
DAD name: portal30 PROCEDURE : PORTAL30.wwv_edit_tab.edititem
Can you please tell us what went wrong.
ThanksVikas,
From the server error messages reference:
Cause: An attempt has been made to access a domain index that is being built or is marked failed by an unsuccessful ODCIIndexCreate or is marked unusable by a DDL operation.
Action: Wait if the specified index is marked LOADING Drop the specified index if it is marked FAILED Drop or rebuild the specified index if it is marked UNUSABLE.
It's possible you were loading the document while the index was being rebuilt. Search all_indexes where DOMIDX_STATUS <> 'VALID' OR DOMIDX_OPSTATUS <> 'VALID' to find the offending index and rebuild it.
Regards,
Jerry
null -
Error while loading the data from PSA to Data Target
Hi to all,
I'm spacing some error while loading the data to data target.
Error : Record 1 :Value 'Kuldeep Puri Milan Joshi ' (hex. '004B0075006C0064006500650070002000500075007200690
Details:
Requests (messages): Everything OK
Extraction (messages): Everything OK
Transfer (IDocs and TRFC): Errors occurred
Request IDoc : Application document posted
Info IDoc 2 : Application document posted
Info IDoc 1 : Application document posted
Info IDoc 4 : Application document posted
Info IDoc 3 : Application document posted
Data Package 1 : arrived in BW ; Processing : Data records for package 1 selected in PSA - 1 er
Processing (data packet): Errors occurred
Update PSA ( 2462 Records posted ) : No errors
Transfer Rules ( 2462 -> 2462 Records ) : No errors
Update rules ( 2462 -> 2462 Records ) : No errors
Update ( 0 new / 0 changed ) : Errors occurred
Processing end : Errors occurred
I'm totally new to this issue. please help to solve this error.
Regards,
SaranHi,
I think you are facing an invalid character issue.
This issue can be resolved by correcting the error records in PSA and updating it into the target. For that the first step should be to identify if all the records are there in PSA. You can find out this from checking the Details tab in RSMO, Job log , PSA > sorting records based on status,etc. Once its confirmed force the request to red and delete the particular request from the target cube. Then go to PSA and edit the incorrect records (correcting or blanking out the invalid entries for particular field InfoObject for the incorrect record) and save it. Once all the incorrect records are edited go to RSA1>PSA find the particular request and update to target manually (right click on PSA request > Start update immediately).
I will add the step by step procedure to edit PSA data and update into target (request based).
In your case the error message says Error : Record 1 :Value 'Kuldeep Puri Milan Joshi '. You just need to conver this to Capital letter in PSA and reload.
Edit the field to KULDEEP PURI MILAN JOSHI in PSA and push it to target.
Identifying incorrect records.
System wont show all the incorrect records at the first time itself. You need to search the PSA table manually to find all the incorrect records.
1. First see RSMO > Details > Expand upate rules / processing tabs and you will find some of the error records.
2. Then you can go to PSA and filter using the status of records. Filter all the red requests. This may also wont show the entire incorrect records.
3. Then you can go to PSA and filter using the incorrect records based on the particular field.
4. If this also doesnt work out go to PSA and sort (not filter) the records based on the particular field with incorrect values and it will show all the records. Note down the record numbers and then edit them one by one.
If you want to confirm find the PSA table and search manually."
Also Run the report RS_ERRORLOG_EXAMPLE,By this report you can display all incorrected records of the data & you can also find whether the error occured in PSA or in TRANSFER RULES.
Steps to resolve this
1. Force the request to red in RSMO > Status tab.
2. Delete the request from target.
3. Come to RSMO > top right you can see PSA maintenace button > click and go to PSA .
4.Edit the record
5. Save PSA data.
6. Got to RSA15 > Search by request name > Right click > update the request from PSA to target.
Refer how to Modify PSA Data
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40890eda-1b99-2a10-2d8b-a18b9108fc38
This should solve your problem for now.
As a long term you can apply some user exit in source system side or change your update rules to ensure that this field is getting blanked out before getting loaded in cube or add that particular char to permitted character list in BW.
RSKC --> type ALL_CAPITAL --> F8 (Execute)
OR
Go to SE38 and execute the program RSKC_ALLOWED_CHAR_MAINTAIN and give ALL_CAPITAL or the char you want to add.
Check the table RSALLOWEDCHAR. It should contain ALL_CAPITAL or the char you have entered.
Refer
/people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
/people/sap.user72/blog/2006/07/08/invalid-characters-in-sap-bw-3x-myths-and-reality-part-1
/people/aaron.wang3/blog/2007/09/03/steps-of-including-one-special-characters-into-permitted-ones-in-bi
http://help.sap.com/saphelp_nw04/helpdata/en/64/e90da7a60f11d2a97100a0c9449261/frameset.htm
For adding Other characters
OSS note #173241 Allowed characters in the BW System
Thanks,
JituK
Edited by: Jitu Krishna on Mar 22, 2008 1:52 PM -
Error while compiling the PO Item Category KFF
Kindly help me. I am new and learning Purchasing module and now stuck because of an error while compiling the PO Item Category KFF. This is because a segment is saved in the database incompletely.
Now the segment does not show in the Segments Summary form. But when I enter the same Number, I get the error APP-FND-00924: You chose a sement number that is used by another segment.
When I freeze and compile the structure with different segments, I get the error
APP-FND-00668: The data that defines the flexfield on this field may be inconsistent. Inform your system administrator that the function: FDFRKS could not find the structure definition for the flexfield specified by Application = &APPL, Code = MCAT and Structure number = 201 (APPID=401)
APP-FND-00738: Error detected when attempting to load value set on Context: &CONTEXT for Segment: &SEGMENT in Routine: FDFBKS
APP-FND-01564: ORACLE error 1403 in FDFAVS3
Cause: FDFAVS3 failed due to ORA-01403: no data found.
The SQL statement being executed at the time of the error was: and was executed from the file &ERRFILE.
Regards
ReemHi Sandeep
Sorry that I am bothering with basic questions, but I am not able to run any Select queries. It gives error Table or View does not exist. I can see the table from ALL_TABLES view, but I cannot Select.
I have logged in as oracle user. This is not Vision datbase. Can you let me know the default dba user and password or how to get the permission?
Regards
Reem
Maybe you are looking for
-
IOS 6.1.2 for iPhone 4s draining battery?
I downloaded iOS 6.1.2 for my iPhone 4s a few days ago when my phone told me it was time to update. Now all I get is 17 minutes of usage and 6 hours of standby when I used to get at least 18 hours of standby and 6 hours of usage before my phone neede
-
I am having a lot of trouble running I-tunes since I upgraded os to Windows 8.1
-
Hi, I am New to Apex development, I have created a List menu (left sidebar) with 4 to 5 Menu Options in that. When I click a Menu, it should open the corresponding page along with the menu in the left side. Can you Please guide me to achieve the same
-
Macbook pro will not charge, green light stay on.
today it ran out of charge and ive plugged the charger in, but it doesnt seem to charge. The light on the charger did not turn from green to orange, it stayed green. It has been like that for about 30 minutes now. The computer will not turn on when I
-
Cant find info about dirt behind sreen, 4 mo old
my 3gs is only 4 mo old and it has dirt behind the screen! realy bug'n me now, iv had at&t for several years now and the first thing they tell me is they dont work on them. anyone know what apple will do about it? iv searched it but iv not dropped it