Error while Enabling Active Data Cache Clustering Services: error 1753

I have installed the Oracle BAM with Enterprise link.All the installation was successful.But while Enabling Active Data Cache Clustering Services using the following command:
cluster.exe restype "Oracle Business Activity Monitoring Active Data Cache" /create /dll:"C:\OracleBAM\ADCClusterResourceType.dll"
i am getting the folllowing error:
System error 1753 has occurred.
There are no more endpoints available from the endpoint mapper.
Although i stopped the Active Data Cache Service..?
I am unable to resolve it
Kindly help me out
Ramesh Nambala

Hi.
I encountered the same problem. In my case, the reason was that I created a new user for BAM (to be provided when installing BAM) but ran the installation under another user account. It seems like these users must be the same to make it work.
Greetings,
cor

Similar Messages

Error in Starting Active Data Cache

Hi All,
I am trying to start the BAM services, all other services are getting started except 'Active Data Cache'.
Its erroring out with the following msg in the log....
Could any one look in to this issue......Thanks in Advance.
here is the log msg
2009-01-16 15:56:56,538 [10688] ERROR - ActiveDataCache DPAPI was unable to decrypt data. CryptUnprotectData failed. Error -2146893813: Key not valid for use in specified state.
2009-01-16 15:56:56,538 [10688] WARN - ActiveDataCache Exception occurred in method Startup
Stack trace:
at Oracle.BAM.Common.Security.DataProtector.DPAPI.Decrypt(Byte[] cipherTextBytes, Byte[] entropyBytes, String& description)
at Oracle.BAM.Common.Security.DataProtector.DPAPI.Decrypt(String cipherText, String entropy, String& description)
at Oracle.BAM.Common.Security.DataProtector.DPAPI.Decrypt(String cipherText)
at Oracle.BAM.Common.Security.DataProtector.DataProtector.Decrypt(String strData)
at Oracle.BAM.ActiveDataCache.Kernel.StorageEngine.Oracle.ConnectionStringDecrypter.Decrypt(String strEncrypted)
at Oracle.BAM.ActiveDataCache.Kernel.StorageEngine.Oracle.OracleDataFactory.GetInstance()
at Oracle.BAM.ActiveDataCache.Kernel.StorageEngine.Oracle.OracleStorageEngine.GetDataFactory()
at Oracle.BAM.ActiveDataCache.Kernel.StorageEngine.Oracle.OracleStorageEngine.GetServerVersion()
at Oracle.BAM.ActiveDataCache.Kernel.StorageEngine.Oracle.OracleStorageEngine.Startup(IDictionary oParameters)
at Oracle.BAM.ActiveDataCache.Kernel.Server.DataStoreServer.Startup()
2009-01-16 15:56:56,553 [10688] ERROR - ActiveDataCache The Oracle BAM Active Data Cache service failed to start. Oracle.BAM.ActiveDataCache.Common.Exceptions.CacheException: ADC Server exception in Startup(). ---> System.Exception: DPAPI was unable to decrypt data. CryptUnprotectData failed. Error -2146893813: Key not valid for use in specified state.
at Oracle.BAM.Common.Security.DataProtector.DPAPI.Decrypt(Byte[] cipherTextBytes, Byte[] entropyBytes, String& description)
at Oracle.BAM.Common.Security.DataProtector.DPAPI.Decrypt(String cipherText, String entropy, String& description)
at Oracle.BAM.Common.Security.DataProtector.DPAPI.Decrypt(String cipherText)
at Oracle.BAM.Common.Security.DataProtector.DataProtector.Decrypt(String strData)
at Oracle.BAM.ActiveDataCache.Kernel.StorageEngine.Oracle.ConnectionStringDecrypter.Decrypt(String strEncrypted)
at Oracle.BAM.ActiveDataCache.Kernel.StorageEngine.Oracle.OracleDataFactory.GetInstance()
at Oracle.BAM.ActiveDataCache.Kernel.StorageEngine.Oracle.OracleStorageEngine.GetDataFactory()
at Oracle.BAM.ActiveDataCache.Kernel.StorageEngine.Oracle.OracleStorageEngine.GetServerVersion()
at Oracle.BAM.ActiveDataCache.Kernel.StorageEngine.Oracle.OracleStorageEngine.Startup(IDictionary oParameters)
at Oracle.BAM.ActiveDataCache.Kernel.Server.DataStoreServer.Startup()
--- End of inner exception stack trace ---
at Oracle.BAM.ActiveDataCache.Kernel.Server.DataStoreServer.Startup()
at Oracle.BAM.ActiveDataCache.Kernel.Server.Server.Startup()
at Oracle.BAM.ActiveDataCache.Service.DataServer.Run()

Hi.
I encountered the same problem. In my case, the reason was that I created a new user for BAM (to be provided when installing BAM) but ran the installation under another user account. It seems like these users must be the same to make it work.
Greetings,
cor

Getting Error while accessing the data using odata service

Hi All,
Iam new to SAP FIORI.
Iam getting the below error while accessing the data using odata service.
"Failed to load resource: the server responded with a status of 404 (Not found)"
"No 'Access-Control-Allow-Origin' header is present on the requested resource. Origin "
i have tried all the solutions like changing the url pattern "proxy/htttp".
and disabled - security in chrome (Chrome is Updated version).
i tried with IE still got the same problem.
And installed all the required software in eclipse
While installing GWPA plugin i got the following error.
let me know if any one have idea.
Thanks in advance.

> Do you want to add and/or update the data in the already existing tables or do you want to replace the content completely?
>
> so in that way :
> bot the options are fine what ever take less time.
Sorry mate, but YOU have to know what you want here.
I gave you an easy to follow set of steps.
As you don't seam to mind the outcome, just might just use them...
> I wanted to know weathe i can use the loadercli for thie export import or not? if yes then is there any new steps to do before i do the export import?
We had this discussion before...
>
> For that the easiest option would be just to drop the tables of SAPR3 and run the import again.
>
> For ease of use you could also just do:
> - logon as superdba
> - drop user SAPR3
> - create user SAPR3 password SOMEPW not exclusive dba
>
> After these steps you can easily pump the data into the database again.
>
> So here in th above given steps , i am creating a new SAPR3 user and why it is not exclusive dba ?
> i already have that user SAPR3 can i use the same.
Yes, you do have the SAPR3 user.
But you don't seem to like to read documentation or learn about how the tools work or anything like that.
Therefore I gave you s simple way to reach your goal.
Of course it's possible to reuse the user.
But then you would have to deal with already existing tables, already existing data etc.
You don't seem to be able to do that. So, the easy steps might be better suited for your needs.
regards,
Lars

Error while "Enabling Security for Oracle Management Service"

Hi,
I have installed OEM 10GR1 on Solaris 9. I am using 9.2.0 database for repository.
My first installation of OEM and agent went smoothly, and everything was working fine.
Then, I tried to follow configurating security for Grid Control Framework. I got following error:
/oracle/app/oracle/product/10gEM>cd bin
/oracle/app/oracle/product/10gEM/bin>./emctl secure oms
Oracle Enterprise Manager 10g Release 10.1.0.3.0.
Copyright (c) 1996, 2004 Oracle Corporation. All rights reserved.
Enter Enterprise Manager Root Password :
Enter Agent Registration password :
Enter a Hostname for this OMS :
Checking Repository... Done.
Checking Repository for an existing Enterprise Manager Root Key... Done.
Generating Enterprise Manager Root Key (this takes a minute)... Done.
Fetching Root Certificate from the Repository... Done.
Generating Registration Password Verifier in the Repository... Done.
Generating Oracle Wallet Password for Enterprise Manager OMS... Done.
Generating Oracle Wallet for Enterprise Manager OMS...Missing /oracle/app/oracle/product/10gEM/sysman/wallets/oms.uxtora1/ewallet.p12
:/oracle/app/oracle/product/10gEM/bin>
Please help.

Thanks for response. I had temp space full issue with repository database. After bouncing database, the temp tablespace became empty, and the secure operation went smooth.

Error starting Oracle BAM active data cache service

Hi
after installing BAM every thing working fine ,but if restart my system Oracle BAM active data cache service throwing following error
"The Oracle BAM Active Data Cache service on Local computer started and then stopped.Some services stop automatically if they have no work to do,for example the performance logs and alerts service"
Database is running fine
Following is the ADC log file error
2007-12-07 17:19:29,640 [2928] ERROR - ActiveDataCache The Oracle BAM Active Data Cache service failed to start. Oracle.BAM.ActiveDataCache.Common.Exceptions.CacheException: ADC Server exception in Startup(). ---> System.DllNotFoundException: Unable to load DLL (OraOps10.dll).
at Oracle.DataAccess.Client.OpsTrace.GetRegTraceInfo(UInt32& TrcLevel, UInt32& StmtCacheSize)
at Oracle.DataAccess.Client.OraTrace.GetRegistryTraceInfo()
at Oracle.DataAccess.Client.OracleConnection..ctor(String connectionString)
at Oracle.DataAccess.Client.OracleConnection..ctor(String connectionString)
at Oracle.BAM.ActiveDataCache.Kernel.StorageEngine.Oracle.OracleDataFactory.GetConnection()
at Oracle.BAM.ActiveDataCache.Kernel.StorageEngine.Oracle.OracleStorageEngine.GetServerVersion()
at Oracle.BAM.ActiveDataCache.Kernel.StorageEngine.Oracle.OracleStorageEngine.Startup(IDictionary oParameters)
at Oracle.BAM.ActiveDataCache.Kernel.Server.DataStoreServer.Startup()
--- End of inner exception stack trace ---
at Oracle.BAM.ActiveDataCache.Kernel.Server.DataStoreServer.Startup()
at Oracle.BAM.ActiveDataCache.Kernel.Server.Server.Startup()
at Oracle.BAM.ActiveDataCache.Service.DataServer.Run()
2007-12-07 17:24:45,250 [1524] ERROR - ActiveDataCache Unable to load DLL (OraOps10.dll).
2007-12-07 17:24:45,265 [1524] WARN - ActiveDataCache Exception occurred in method Startup
Please help me in resolving this issue .Am getting this issue every time
Thanks
BS

Make sure the path to the ODAC used by BAM (C:\OracleBAM\ClientForBAM\bin) is the first item in the system PATH
environment variable. Restart your computer after fixing this.
If that doesn't fix it, please check the Troubleshooting section in the BAM Install Guide.
Regards, Stephen

Error in Starting Oracle BAM Active Data Cache

I am not able to start "Oracle BAM Active Data Cache" on my machine.
The other two components "Oracle BAM Event Engine" and "Oracle BAM Report Cache" are starting properly.
When I see the event log file of my Computer I could see the details as below:
Event Type: Error
Event Source: Oracle BAM Active Data Cache
Event Category: None
Event ID: 0
Date: 2/7/2007
Time: 3:51:25 PM
User: N/A
Computer: CHNANDA-WXP
Description:
ActiveDataCache: The Oracle BAM Active Data Cache service failed to start. Oracle.BAM.ActiveDataCache.Common.Exceptions.CacheException: ADC Server exception in Startup(). ---> Oracle.DataAccess.Client.OracleException ORA-12541: TNS:no listener at Oracle.DataAccess.Client.OracleException.HandleErrorHelper(Int32 errCode, OracleConnection conn, IntPtr opsErrCtx, OpoSqlValCtx* pOpoSqlValCtx, Object src, String procedure)
at Oracle.DataAccess.Client.OracleConnection.Open()
at Oracle.DataAccess.Client.OracleConnection.Open()
at Oracle.BAM.ActiveDataCache.Kernel.StorageEngine.Oracle.OracleStorageEngine.GetServerVersion()
at Oracle.BAM.ActiveDataCache.Kernel.StorageEngine.Oracle.OracleStorageEngine.Startup(IDictionary oParameters)
at Oracle.BAM.ActiveDataCache.Kernel.Server.DataStoreServer.Startup()
--- End of inner exception stack trace ---
at Oracle.BAM.ActiveDataCache.Kernel.Server.DataStoreServer.Startup()
at Oracle.BAM.ActiveDataCache.Kernel.Server.Server.Startup()
at Oracle.BAM.ActiveDataCache.Service.DataServer.Run()
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Could anyone pls help me?
Thanks and Regards,
Chinmaya Nanda

hi Chinmaya -can yoy tell us your companyname,project ? Your problem is very simple.BAM ADC is notable to reachoracle db.fromyour dos prompt- try tnsping <yrDB> [default is oraclebam or orcl ]/ Also see FAQ pages. there is a requirement on dos prompt setting, with <clientforBAM>as 1st parameter

BAM Report and Active data cache

I am having problems with reports that have automatic active data retrieval.
It does not work.
If I load the report it extracts the data correctly from an external data source. If I Reprompt or refresh it brings back changed data from the data source.
It does not automatically poll for changes even though it is set in the report properties.
If I stop and start the Active data cache service it starts polling and reconnecting, but not resynching the data.
In the Active data cache log I have the following entries :
2005-12-01 09:36:54,062 [3576] ERROR - ActiveDataCache Viewset not found:
2005-12-01 09:36:54,078 [3576] WARN - ActiveDataCache Exception occurred in method GetChangeList
Stack trace:
at Oracle.BAM.ActiveDataCache.Kernel.Viewsets.ViewsetManager.GetViewset(String strViewsetID)
at Oracle.BAM.ActiveDataCache.Kernel.Viewsets.ViewsetManager.GetChangeList(String strViewsetID, Int32 iTimeout)
at Oracle.BAM.ActiveDataCache.Kernel.Server.DataStoreServer.GetChangeList(String strViewsetID, Int32 iTimeout)
Has anyone any ideas on what the problem is ?
Thanks

Sriram
Can you identify your company and project.?
a) Maximum capacity of ADC == maximum capacity of your underlying Oracle DB used by BAM as repository.
b) Retention period - infinite - data is there in BAM ADC (also in BAM repository) till you manually delete it (there is no automatic delete of old data)
c) Yes ADC stores its data internally in the Oracle database (aka BAM repository)
d) No - we generally donot publish ADC internals. This is a known decision since end users will only work either to put data into ADC or plot reports/dashboards from BAM GUI. You have to be very specific on what your are trying to acheive and we can suggest possible alternates.

Error while reading access data (URL, user,password) for the Adapter Engine

Hi,
Any idea on below message? I am doing file to file scenario and got the below tarce from sxmb_moni.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1>af.pi1.piserver1</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>no_messaging_url_found: Unable to find URL for Adapter Engine af.pi1.piserver1</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading access data (URL, user, password) for the Adapter Engine af.pi1.piserver1</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Thanks
Balaji

It looks like the adapter engine is not able to register him self on SLD, you have to check in the SLD the "Exchange Infrastructure" domain, you have to verify restarting the J2EE the adapter engine update the entries in the SLD related to the specific XI Domain.
Launch Visual Administrator >> Server >> Services >> SAP AF CPA Cache
Enter the appropriate values for:
SLD.selfregistration.hostname (Use fully qualified hostname)
SLD.selfregistration.httpPort
SLD.selfregistration.httpsPort
Sandro

Error while reading access data (URL, user, password) for the Adapter Engin

Hi all,
I encountered a red flag in sxmb_moni and when I click on the flag, I get the following message:
Error while reading access data (URL, user, password) for the Adapter Engine
Is there any way I can resolve this? thanks all
Regards,
IX

Possible reason is Adapter engine is not registered on SLD. Check in SLD.
You can also try restarting J2EE adapter engine and update SLD entries specific to XI domain.
Lauch Visual admin go to Server > services > SAP AF CPA Cache
Enter the appropriate values for:
SLD.selfregistration.hostname (Use fully qualified hostname)
SLD.selfregistration.httpPort
SLD.selfregistration.httpsPort
Finally, if all the above seem to be correct check the userID / pwd for user ID : PI*.

Error in Loading Meta Data File for Service 'CL_ACCOUNTING_DOCUMENT_DP'

Hi Guys,
Need to your assistance in solving the below Error.
1. Error while loading metadata file for various service which required Connectors to be created .
Example : CL_ACCOUNTING_DOCUMENT_DP',
BEP
ZCB_COST_CENTER_SRV
1
Cost Center Service
CB_COST_CENTER_SRV
1
BEP
ZCB_GOODS_RECEIPT_SRV
1
Goods Receipt Service
CB_GOODS_RECEIPT_SRV
1
2. While Expanding the node for connectors in ESH_COCKPIT for SAPAPPLH . Below Error occurs
Could not rename Data Type "SIG_IL_USA_2" in SWC EAAPPLH - errors occurred during renaming
Could not rename Data Type "SIG_IL_SDR_2" in SWC EAAPPLH - errors occurred during renaming
Could not rename Data Type "SIG_IL_RES_2" in SWC EAAPPLH - errors occurred during renaming
Could not rename Data Type "SIGN_TYPE_UD_1" in SWC EAAPPLH - errors occurred during renaming
Could not rename Data Type "SIGN_TYPE_SM_1" in SWC EAAPPLH - errors occurred during renaming
Could not rename Data Type "SIGN_TYPE_RR_1" in SWC EAAPPLH - errors occurred during renaming
Could not rename Data Type "RMXTE_TRIALID_1" in SWC EAAPPLH - errors occurred during renaming
Could not rename Data Type "QZUSMKZHL_1" in SWC EAAPPLH - errors occurred during renaming
Could not rename Data Type "QWERKVORG_1" in SWC EAAPPLH - errors occurred during renaming
Could not rename Data Type "QVNAME_2" in SWC EAAPPLH - errors occurred during renaming
Could not rename Data Type "QVMENGE_2" in SWC EAAPPLH - errors occurred during renaming
Could not rename Data Type "QVINSMK_2" in SWC EAAPPLH - errors occurred during renaming
Could not rename Data Type "QVGRUPPE_2" in SWC EAAPPLH - errors occurred during renaming
Could not rename Data Type "QVEZAEHLER_2" in SWC EAAPPLH - errors occurred during renaming

Hi,
do you have solved this issue? We have the same problem with ESH_COCKPIT and SAPAPPLH component.
Regards,
Martin Sindlar

Error while retrieving bulk data from mdm in staging server

I am getting an error while retrieving bulk data from MDM. The error goes like this "NiRawReadError: An error occured when reading data from socket.".
Could anyone please suggest me about the possible cause of this error. Please reply soon.
Moderator message: network error, relation to ABAP development unclear, please search for available answers, check with system administrators, consult SAP service marketplace.
Edited by: Thomas Zloch on Nov 22, 2010 5:16 PM

Can you elaborate the thing... I don't think /*+ APPEND */ this is working for me ,still I am getting same error.
If you have any other suggestion,I would like to hear.
Should i not put commit after some 500 records inserted ? As i am putting commit once after whole data gets inserted.

Urgent Help Req.: Exception=ORABPEL-11162 Error while reading native data

Hi All,
I am getting below error: Exception=ORABPEL-11162
Error while reading native data.
[Line=6, Col=7|http://forums.oracle.com/forums/] Not enough data available in the input, when trying to read data of length "22" for "element with name PurOrderNum" from the specified position, using "style" as "fixedLength" and "length" as "22".
Ensure that there is enough data from the specified position in the input.
Let me also give you the brief scenario of what I am trying to achieve.
INTERFACE FUNCTIONING:_
I have an interface which reads the records in a file in a chunk through ChunkRead adapter and and after one successful reading if chunk it calls the DB adapter to insert the records in the table.
Now these records are committed and next chunk is read and the process goes on till all the records are read.
After this the API is called which does the processing of these records.
Inserting records in the DB is a XA transaction which means if anything goes wrong while inserting the data, the records which are added earlier are rolled back.
ISSUE:_
Now the issue comes when I do the negative testing. Since my file is based on fixed length schema., I change the length of last record from 15 to 13. (say total are 10 records)
Now what happens is when chunkread tries to read the record of 15 length it gets only 13 characters and hence ignores the records.
But the chunkread reads all other 9 records correctly and sends this to DB adapter which now inserts them correctly in the DB.
But being a global transaction I want that if any record is missing from DB in comparison to those in file then whole transaction should roll back.
So I am unable to make this whole process as global transaction. This is because the ChunkRead adapter inspite of detecting the error doesn’t throw it back.
Moreover if this problem occurs in say next chunk then also I am unable to find out how to rollback the whole transaction. Because the first chunk was correct.
So basically two concerns are there:+
How to detect that chunkread adapter has missed one record?+
Secondly, If it’s detected then how should I rollback the transaction that caused earlier records to enter into database?+
Please let me know if anyone has faced this issue earlyer and how it got resolved. Any pointers regarding this would be of great help.
Also attached is the chunkread log for reference.
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2008-10-06T09:23:58.466-04:00</TSTZ_ORIGINATING>
<COMPONENT_ID>tip</COMPONENT_ID>
<MSG_TYPE TYPE="TRACE"></MSG_TYPE>
<MSG_LEVEL>16</MSG_LEVEL>
<HOST_ID>usmlrh01.xyz.com</HOST_ID>
<HOST_NWADDR>192.168.245.39</HOST_NWADDR>
<MODULE_ID>esb.server.service.impl.inadapter</MODULE_ID>
<THREAD_ID>57</THREAD_ID>
<USER_ID>orasoa</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>192.168.245.39:29832:1223297491683:44</UNIQUE_ID><SEQ>130</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>JCA: FileRejector::rejectTextualMessage errList=[oracle.tip.pc.services.translation.xlators.nxsd.ErrorList@a5213b]</MSG_TEXT>
</PAYLOAD>
</MESSAGE>
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2008-10-06T09:23:58.466-04:00</TSTZ_ORIGINATING>
<COMPONENT_ID>tip</COMPONENT_ID>
<MSG_TYPE TYPE="TRACE"></MSG_TYPE>
<MSG_LEVEL>16</MSG_LEVEL>
<HOST_ID>usmlrh01.xyz.com</HOST_ID>
<HOST_NWADDR>192.168.245.39</HOST_NWADDR>
<MODULE_ID>esb.server.service.impl.inadapter</MODULE_ID>
<THREAD_ID>57</THREAD_ID>
<USER_ID>orasoa</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>192.168.245.39:29832:1223297491683:44</UNIQUE_ID><SEQ>130</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>JCA: FileRejector::rejectTextualMessage badCount=[1]</MSG_TEXT>
</PAYLOAD>
</MESSAGE>
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2008-10-06T09:23:58.467-04:00</TSTZ_ORIGINATING>
<COMPONENT_ID>tip</COMPONENT_ID>
<MSG_TYPE TYPE="TRACE"></MSG_TYPE>
<MSG_LEVEL>1</MSG_LEVEL>
<HOST_ID>usmlrh01.xyz.com</HOST_ID>
<HOST_NWADDR>192.168.245.39</HOST_NWADDR>
<MODULE_ID>esb.server.service.impl.inadapter</MODULE_ID>
<THREAD_ID>57</THREAD_ID>
<USER_ID>orasoa</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>192.168.245.39:29832:1223297491683:44</UNIQUE_ID><SEQ>130</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>JCA: Rejecting message fileName=/rh01/s01/n01/Distributions/B2B/Gentran/In/855/Test.txt, startLine=4, startColumn=1, endLine=-1, endCol=-1, Exception=ORABPEL-11162
Error while reading native data.
[Line=6, Col=7] Not enough data available in the input, when trying to read data of length "22" for "element with name PurOrderNum" from the specified position, using "style" as "fixedLength" and "length" as "22".
Ensure that there is enough data from the specified position in the input.
}</MSG_TEXT>
</PAYLOAD>
</MESSAGE>
PFB the version details :
SOA suite version : 10.1.3.3.1 and JDEV : 10.1.3.3
Edited by: SOA Team on Oct 6, 2008 10:48 PM

Just a thought, you could set the terminator for the last field as {eol} instead of length, this means that it should read the last field regardless of the length.
Depending on the logic of Db adapter the error could be traped due to incorrect length.
If the file starts each row with a constant(s), e.g. 01 then you can terminate the previous line on that, this is the better option but relys on the file format.
The other option is a little thing call compensation, ouch. Basically this allows you to back out commited rows but you have to provide all the logic, it is generally something people avoid because of the complexity.
cheers
James

36 duplicate record found. -- error while loading master data

Hello BW Experts,
Error while loading master data
( green light )Update PSA ( 50000 Records posted ) No errors
( green light )Transfer rules ( 50000 ³ 50000 Records ): No errors
( green light )Update rules ( 50000 ³ 50000 Records ): No errors
( green light ) Update ( 0 new / 50000 changed ): No errors
( red light )Processing end: errors occurred
     Processing 2 finished
Þ     36 duplicate record found. 15718 recordings used in table /BIC/PZMATNUM
Þ     36 duplicate record found. 15718 recordings used in table /BIC/XZMATNUM
This error repeats with all the data-packets.
what could be the reason of the error. how to correct the error.
Any suggestions appreciated.
Thanks,
BWer

BWer,
We have exactly the same issue when loading the infoobject 0PM_ORDER, the datasource is 0PM_ORDER_ATTR.
The workaround we have been using is 'Manual push' from the details tab of the monitor. Weirdly we don't have this issue in our test and dev systems, even in Production, this doesn't occur somedays. We have all the necessary settings enabled in the infopackage.
Did you figure out a solution for your issue, if so please let me know and likewise I will.
-Venkat

ADC exception=BAM-01262: Active Data Cache server exception in openViewset

Hi All,
I am getting the below mentioned error when i try to open a report from Active Studio in BAM.
If i give parameter value ' All ' in the prompt, it shows all the value. But if i give specific values like one parameter value 1007 and other All etc, it gives the below error. I tried giving parameter value ' All ' in the prompt after getting the error, its not showing the values.
The below error is from front end:-
SQL EXCEPTION NULL : Invalid column index
The below error from back end:-
[2012-01-10T06:39:07.916+05:30] [bam_server1] [ERROR] [] [oracle.bam.reportcache] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 83cdf926093045b8:4fde7fa7:134bf505061:-8000-00000000000044f4,0] [APP: oracle-bam#11.1.1] *ReportCache: ReportCacheServer.OpenViewSet: ADC exception=BAM-01262: Active Data Cache server exception in openViewset(). [[*
at oracle.bam.adc.kernel.util.Util.getCacheException(Util.java:101)
at oracle.bam.adc.kernel.util.Util.getCacheException(Util.java:154)
at oracle.bam.adc.kernel.util.Util.getCacheException(Util.java:172)
at oracle.bam.adc.kernel.server.DataStoreServer.openViewset(DataStoreServer.java:1110)
at oracle.bam.adc.ejb.BamAdcServerBean.openViewset(BamAdcServerBean.java:841)
at sun.reflect.GeneratedMethodAccessor702.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at com.bea.core.repackaged.springframework.jee.intercept.MethodInvocationInvocationContext.proceed(MethodInvocationInvocationContext.java:104)
at oracle.bam.adc.ejb.BamAdcServerBean.interceptor(BamAdcServerBean.java:266)
at sun.reflect.GeneratedMethodAccessor374.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
[2012-01-10T06:39:07.913+05:30] [bam_server1] [ERROR] [] [oracle.bam.adc] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 83cdf926093045b8:4fde7fa7:134bf505061:-8000-00000000000044f4,0] [APP: oracle-bam#11.1.1] ActiveDataCache: Exception occurred in method openViewset(_TPT_PO_HEADER_STG_TBL,0)[[
Exception: java.sql.SQLException: SQLError(17003) SQLState(99999) Invalid column index
at oracle.jdbc.driver.OraclePreparedStatement.setStringInternal(OraclePreparedStatement.java:6336)
at oracle.jdbc.driver.OraclePreparedStatement.setObjectCritical(OraclePreparedStatement.java:10605)
at oracle.jdbc.driver.OraclePreparedStatement.setObjectInternal(OraclePreparedStatement.java:10518)
at oracle.jdbc.driver.OraclePreparedStatement.setObjectInternal(OraclePreparedStatement.java:11574)
at oracle.jdbc.driver.OraclePreparedStatement.setObject(OraclePreparedStatement.java:11544)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.setObject(OraclePreparedStatementWrapper.java:249)
at oracle.bam.adc.common.externaldatasources.JDBC.getDataReader(JDBC.java:322)
at oracle.bam.adc.kernel.datasets.ExternalStorageEngine.getDataReader(ExternalStorageEngine.java:76)
at oracle.bam.adc.kernel.viewsets.utilities.externaldata.DataImporter.executeQuery(DataImporter.java:95)
at oracle.bam.adc.kernel.viewsets.utilities.externaldata.ExternalDataManager.importExternalData(ExternalDataManager.java:228)
at oracle.bam.adc.kernel.viewsets.utilities.externaldata.ExternalDataManager.importExternalFactData(ExternalDataManager.java:151)
at oracle.bam.adc.kernel.viewsets.utilities.externaldata.ExternalDataManager.getExternalData(ExternalDataManager.java:103)
at oracle.bam.adc.kernel.viewsets.Viewset.loadData(Viewset.java:259)
at oracle.bam.adc.kernel.viewsets.ViewsetBase.initialize(ViewsetBase.java:171)
at oracle.bam.adc.kernel.viewsets.Viewset.initialize(Viewset.java:220)
at oracle.bam.adc.kernel.viewsets.ViewsetBase.open(ViewsetBase.java:154)
Please give me any suggestion on this.
Thanks,
Manikandan

This problem was solved when I installed a new product version.

Mapping debbuging error:DBG1006: Error while initializing test data

Hi,
I have created a mapping in which I am trying to delete data from a table based on exisitence of rows in another table with a filter condtion in between them.When i try to run the debbugger, it throws following error:
============
Analyzing map for debug...
Retrieving Control Center connection info...
Connecting to Control Center schema...
Checking character set of Control Center schema...
Configuring sources and targets...
Mapping Debugger Error:
oracle.wh.service.sdk.mapping.debugger.WBMappingDebuggerException: DBG1006: Error while initializing test data for sources and targets:
oracle.wh.repos.sdk.CMPException: Trying to access invalid Object.
Element ID: 110138
Status: 4
Owning FCO: 98409
==================
Any idea what could be the possible cause?
Query which I am trying to simulate is of following type:
Delete from TableA t1
where exits(select 1 from TableB t2 where t1.col1 = t2.col1 and t2.col2 = 'delete')
Thanks
AJ.

Oops..thats weird.
Tell me one thing...then how gud is the code generated in terms of working...if someone has to really test the code pre-hand for expected business logicWhy i am raising this concern is becoz there are many features for which OWB provides support in indirect way(workaround) like exists/not exists.
Do we need to deploy mapping each time and then test through a run from Control centre?
Other thing, As far i understand, the code generated is not in such a format that one can directly copy paste it in any sql/plsql editor and test it...
Regards
AJ.

Error while Enabling Active Data Cache Clustering Services: error 1753

Similar Messages

Maybe you are looking for