Error while entering Applicant Data PB10

Dear Experts...
While entering the initial data of applicant when in save the data ann error occurs : "No application assigned to this applicant no. (Infotype Application)".
I have checked all integration components they are working fine. I also check the number ranges they are also assigned properly. Plz help.

Dear Delik...
I am selecting that.... Even then system gives me error....Even number ranges are properly choosen and activated. Basically this is not error message....its simple message but system doesnot allow us to save the data. Simple message means it is marked with Green tick... not red cross.

Similar Messages

Error While Entering the Data: Code and Name

Hi Experts,
I have defined the Two User Defined tables and SBO created Two User Defined Forms.
i am able added the Data in One of the Form with the same value in Code columns for multiple rows and different value in Name columns for multiple rows.
but when i am trying to do the same thing second form, i am getting the following Error.
"This entry already exists in the following tables '' (@ABC) (ODBC -2035) [Message 131-183]"
Thanks in Advance
Regards
Lokesh

Hi,
U cannot enter the same value again and again... they are unique fields..
Vasu Natari.

Error While entering data in VA01

Hi,
I get the following error while entering data for "Plant" in Sales order creation (VA01). Can anyone please tell me how to solve this problem.
Runtime Errors SAPSQL_INVALID_TABLENAME
Except. CX_SY_DYNAMIC_OSQL_SEMANTICS
Date and Time 27.04.2009 12:57:13
Short dump has not been completely stored (too big)
Short text
A table name, specified in an SQL command, is unknown.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLV61Z" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYNAMIC_OSQL_SEMANTICS', was
not caught in
procedure "SEL_KONDTAB" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
An invalid table name "A996" was specified in an Open SQL command:
Due to one of the following reasons, the error occurs only at runtime:
- the table name was specified dynamically, or
- the SELECT clause, WHERE clause, GROUP-BY clause, HAVING clause, or
ORDER-BY clause was specified dynamically.
Missing RAISING Clause in Interface
Program SAPLV61Z
Include LV61ZU01
Row 260
Module type (FORM)
Module Name SEL_KONDTAB
Trigger Location of Exception
Program SAPLV61Z
Include LV61ZU01
Row 724
Module type (FORM)
Module Name SEL_KONDTAB
Source Code Extract
Line SourceCde
694 and kschl = se_kschl
695 and datbi >= se_date
696 and datab <= se_date
697 and (coding_tab).
698 endif.
699 endif.
700 else.
701 if t681-ksdat is initial.
702 if not <entrytab> is assigned.
703 select * from (t681-kotab) appending table <cond_tab>
704 where kappl = se_kappl
705 and kschl = se_kschl
706 and (coding_tab).
707 else.
708 select * from (t681-kotab) appending table <cond_tab>
709 for all entries in <entrytab>
710 where kappl = se_kappl
711 and kschl = se_kschl
712 and (coding_tab).
713 endif.
714 h_subrc = sy-subrc.
715 if select_split ne 0.
716 modify coding_tab from coding_alter index select_split.
717 select * from (t681-kotab) appending table <cond_tab>
718 where kappl = se_kappl
719 and kschl = se_kschl
720 and (coding_tab).
721 endif.
722 else.
723 if not <entrytab> is assigned.
>>>>> select * from (t681-kotab) appending table <cond_tab>
725 where kappl = se_kappl
726 and kschl = se_kschl
727 and datbi >= se_date
728 and datab <= se_date
729 and (coding_tab).
730 else.
731 select * from (t681-kotab) appending table <cond_tab>
732 for all entries in <entrytab>
733 where kappl = se_kappl
734 and kschl = se_kschl
735 and datbi >= se_date
736 and datab <= se_date
737 and (coding_tab).
738 endif.
739 h_subrc = sy-subrc.
740 if select_split ne 0.
741 modify coding_tab from coding_alter index select_split.
742 select * from (t681-kotab) appending table <cond_tab>
743 where kappl = se_kappl
Thank you in advance....
Regards,
Sriram.

An invalid table name "A996" was specified
in an Open SQL command
Find out the transport request pertaining to Table A996 and ensure that both that request and the configuration request pertaining to that table are moved simultaneously.
thanks
G. Lakshmipathi

Error while loading the data from PSA to Data Target

Hi to all,
     I'm spacing some error while loading the data to data target.
Error : Record 1 :Value 'Kuldeep Puri Milan Joshi ' (hex. '004B0075006C0064006500650070002000500075007200690
Details:
Requests (messages): Everything OK
Extraction (messages): Everything OK
Transfer (IDocs and TRFC): Errors occurred
      Request IDoc : Application document posted
      Info IDoc 2 : Application document posted
      Info IDoc 1 : Application document posted
      Info IDoc 4 : Application document posted
      Info IDoc 3 : Application document posted
      Data Package 1 : arrived in BW ; Processing : Data records for package 1 selected in PSA - 1 er
Processing (data packet): Errors occurred
      Update PSA ( 2462 Records posted ) : No errors
      Transfer Rules ( 2462 -> 2462 Records ) : No errors
      Update rules ( 2462 -> 2462 Records ) : No errors
      Update ( 0 new / 0 changed ) : Errors occurred
      Processing end : Errors occurred
I'm totally new to this issue. please help to solve this error.
Regards,
Saran

Hi,
I think you are facing an invalid character issue.
This issue can be resolved by correcting the error records in PSA and updating it into the target. For that the first step should be to identify if all the records are there in PSA. You can find out this from checking the Details tab in RSMO, Job log , PSA > sorting records based on status,etc. Once its confirmed force the request to red and delete the particular request from the target cube. Then go to PSA and edit the incorrect records (correcting or blanking out the invalid entries for particular field InfoObject for the incorrect record) and save it. Once all the incorrect records are edited go to RSA1>PSA find the particular request and update to target manually (right click on PSA request > Start update immediately).
I will add the step by step procedure to edit PSA data and update into target (request based).
In your case the error message says Error : Record 1 :Value 'Kuldeep Puri Milan Joshi '. You just need to conver this to Capital letter in PSA and reload.
Edit the field to KULDEEP PURI MILAN JOSHI in PSA and push it to target.
Identifying incorrect records.
System wont show all the incorrect records at the first time itself. You need to search the PSA table manually to find all the incorrect records.
1. First see RSMO > Details > Expand upate rules / processing tabs and you will find some of the error records.
2. Then you can go to PSA and filter using the status of records. Filter all the red requests. This may also wont show the entire incorrect records.
3. Then you can go to PSA and filter using the incorrect records based on the particular field.
4. If this also doesnt work out go to PSA and sort (not filter) the records based on the particular field with incorrect values and it will show all the records. Note down the record numbers and then edit them one by one.
If you want to confirm find the PSA table and search manually."
Also Run the report RS_ERRORLOG_EXAMPLE,By this report you can display all incorrected records of the data & you can also find whether the error occured in PSA or in TRANSFER RULES.
Steps to resolve this
1. Force the request to red in RSMO > Status tab.
2. Delete the request from target.
3. Come to RSMO > top right you can see PSA maintenace button > click and go to PSA .
4.Edit the record
5. Save PSA data.
6. Got to RSA15 > Search by request name > Right click > update the request from PSA to target.
Refer how to Modify PSA Data
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40890eda-1b99-2a10-2d8b-a18b9108fc38
This should solve your problem for now.
As a long term you can apply some user exit in source system side or change your update rules to ensure that this field is getting blanked out before getting loaded in cube or add that particular char to permitted character list in BW.
RSKC --> type ALL_CAPITAL --> F8 (Execute)
OR
Go to SE38 and execute the program RSKC_ALLOWED_CHAR_MAINTAIN and give ALL_CAPITAL or the char you want to add.
Check the table RSALLOWEDCHAR. It should contain ALL_CAPITAL or the char you have entered.
Refer
/people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
/people/sap.user72/blog/2006/07/08/invalid-characters-in-sap-bw-3x-myths-and-reality-part-1
/people/aaron.wang3/blog/2007/09/03/steps-of-including-one-special-characters-into-permitted-ones-in-bi
http://help.sap.com/saphelp_nw04/helpdata/en/64/e90da7a60f11d2a97100a0c9449261/frameset.htm
For adding Other characters
OSS note #173241 Allowed characters in the BW System
Thanks,
JituK
Edited by: Jitu Krishna on Mar 22, 2008 1:52 PM

Urgent Help Req.: Exception=ORABPEL-11162 Error while reading native data

Hi All,
I am getting below error: Exception=ORABPEL-11162
Error while reading native data.
[Line=6, Col=7|http://forums.oracle.com/forums/] Not enough data available in the input, when trying to read data of length "22" for "element with name PurOrderNum" from the specified position, using "style" as "fixedLength" and "length" as "22".
Ensure that there is enough data from the specified position in the input.
Let me also give you the brief scenario of what I am trying to achieve.
INTERFACE FUNCTIONING:_
I have an interface which reads the records in a file in a chunk through ChunkRead adapter and and after one successful reading if chunk it calls the DB adapter to insert the records in the table.
Now these records are committed and next chunk is read and the process goes on till all the records are read.
After this the API is called which does the processing of these records.
Inserting records in the DB is a XA transaction which means if anything goes wrong while inserting the data, the records which are added earlier are rolled back.
ISSUE:_
Now the issue comes when I do the negative testing. Since my file is based on fixed length schema., I change the length of last record from 15 to 13. (say total are 10 records)
Now what happens is when chunkread tries to read the record of 15 length it gets only 13 characters and hence ignores the records.
But the chunkread reads all other 9 records correctly and sends this to DB adapter which now inserts them correctly in the DB.
But being a global transaction I want that if any record is missing from DB in comparison to those in file then whole transaction should roll back.
So I am unable to make this whole process as global transaction. This is because the ChunkRead adapter inspite of detecting the error doesn’t throw it back.
Moreover if this problem occurs in say next chunk then also I am unable to find out how to rollback the whole transaction. Because the first chunk was correct.
So basically two concerns are there:+
How to detect that chunkread adapter has missed one record?+
Secondly, If it’s detected then how should I rollback the transaction that caused earlier records to enter into database?+
Please let me know if anyone has faced this issue earlyer and how it got resolved. Any pointers regarding this would be of great help.
Also attached is the chunkread log for reference.
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2008-10-06T09:23:58.466-04:00</TSTZ_ORIGINATING>
<COMPONENT_ID>tip</COMPONENT_ID>
<MSG_TYPE TYPE="TRACE"></MSG_TYPE>
<MSG_LEVEL>16</MSG_LEVEL>
<HOST_ID>usmlrh01.xyz.com</HOST_ID>
<HOST_NWADDR>192.168.245.39</HOST_NWADDR>
<MODULE_ID>esb.server.service.impl.inadapter</MODULE_ID>
<THREAD_ID>57</THREAD_ID>
<USER_ID>orasoa</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>192.168.245.39:29832:1223297491683:44</UNIQUE_ID><SEQ>130</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>JCA: FileRejector::rejectTextualMessage errList=[oracle.tip.pc.services.translation.xlators.nxsd.ErrorList@a5213b]</MSG_TEXT>
</PAYLOAD>
</MESSAGE>
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2008-10-06T09:23:58.466-04:00</TSTZ_ORIGINATING>
<COMPONENT_ID>tip</COMPONENT_ID>
<MSG_TYPE TYPE="TRACE"></MSG_TYPE>
<MSG_LEVEL>16</MSG_LEVEL>
<HOST_ID>usmlrh01.xyz.com</HOST_ID>
<HOST_NWADDR>192.168.245.39</HOST_NWADDR>
<MODULE_ID>esb.server.service.impl.inadapter</MODULE_ID>
<THREAD_ID>57</THREAD_ID>
<USER_ID>orasoa</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>192.168.245.39:29832:1223297491683:44</UNIQUE_ID><SEQ>130</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>JCA: FileRejector::rejectTextualMessage badCount=[1]</MSG_TEXT>
</PAYLOAD>
</MESSAGE>
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2008-10-06T09:23:58.467-04:00</TSTZ_ORIGINATING>
<COMPONENT_ID>tip</COMPONENT_ID>
<MSG_TYPE TYPE="TRACE"></MSG_TYPE>
<MSG_LEVEL>1</MSG_LEVEL>
<HOST_ID>usmlrh01.xyz.com</HOST_ID>
<HOST_NWADDR>192.168.245.39</HOST_NWADDR>
<MODULE_ID>esb.server.service.impl.inadapter</MODULE_ID>
<THREAD_ID>57</THREAD_ID>
<USER_ID>orasoa</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>192.168.245.39:29832:1223297491683:44</UNIQUE_ID><SEQ>130</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>JCA: Rejecting message fileName=/rh01/s01/n01/Distributions/B2B/Gentran/In/855/Test.txt, startLine=4, startColumn=1, endLine=-1, endCol=-1, Exception=ORABPEL-11162
Error while reading native data.
[Line=6, Col=7] Not enough data available in the input, when trying to read data of length "22" for "element with name PurOrderNum" from the specified position, using "style" as "fixedLength" and "length" as "22".
Ensure that there is enough data from the specified position in the input.
}</MSG_TEXT>
</PAYLOAD>
</MESSAGE>
PFB the version details :
SOA suite version : 10.1.3.3.1 and JDEV : 10.1.3.3
Edited by: SOA Team on Oct 6, 2008 10:48 PM

Just a thought, you could set the terminator for the last field as {eol} instead of length, this means that it should read the last field regardless of the length.
Depending on the logic of Db adapter the error could be traped due to incorrect length.
If the file starts each row with a constant(s), e.g. 01 then you can terminate the previous line on that, this is the better option but relys on the file format.
The other option is a little thing call compensation, ouch. Basically this allows you to back out commited rows but you have to provide all the logic, it is generally something people avoid because of the complexity.
cheers
James

Error while reading access data (URL, user,password) for the Adapter Engine

Hi,
Any idea on below message? I am doing file to file scenario and got the below tarce from sxmb_moni.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1>af.pi1.piserver1</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>no_messaging_url_found: Unable to find URL for Adapter Engine af.pi1.piserver1</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading access data (URL, user, password) for the Adapter Engine af.pi1.piserver1</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Thanks
Balaji

It looks like the adapter engine is not able to register him self on SLD, you have to check in the SLD the "Exchange Infrastructure" domain, you have to verify restarting the J2EE the adapter engine update the entries in the SLD related to the specific XI Domain.
Launch Visual Administrator >> Server >> Services >> SAP AF CPA Cache
Enter the appropriate values for:
SLD.selfregistration.hostname (Use fully qualified hostname)
SLD.selfregistration.httpPort
SLD.selfregistration.httpsPort
Sandro

Error while reading access data (URL, user, password) for the Adapter Engin

Hi all,
I encountered a red flag in sxmb_moni and when I click on the flag, I get the following message:
Error while reading access data (URL, user, password) for the Adapter Engine
Is there any way I can resolve this? thanks all
Regards,
IX

Possible reason is Adapter engine is not registered on SLD. Check in SLD.
You can also try restarting J2EE adapter engine and update SLD entries specific to XI domain.
Lauch Visual admin go to Server > services > SAP AF CPA Cache
Enter the appropriate values for:
SLD.selfregistration.hostname (Use fully qualified hostname)
SLD.selfregistration.httpPort
SLD.selfregistration.httpsPort
Finally, if all the above seem to be correct check the userID / pwd for user ID : PI*.

Error while entering Timesheet into SAP

Hi All,
While entering Timesheet data into SAP through interface, we are facing an error as follows....
"The attendance/absence type 00/INOR does not exist".
Can anyone explain me about this error?
How to resolve this error?
Thanks and Regards
Pavan

Pavan
Attendance type means
general atttendance
Over time attendance
etc
I belive you are trying to upload attendance infotype 2002 that infotype might have subtype which is not matching properly
Please check
Best Regards

Error while Activating DSO Data

Hello
I am having a problem, I am getting an Error while activating DSO Data, Data is loaded in DSO succefully but can not be activated with this error
"Activation of M records from DataStore object 0FIAR_O03 terminated"
Thanks

Hi,
The activation would have failed due to varies reasons..
It would be a short dump,check in ST22.
check the job log in SM37 for better understanding of the issue.
Have you loaded the respective master data?
if it is a transaction data load,then the SID is checked at the time of activation and not during loading.
So if the master data is not loaded then the activation would fail.
It can also be due to the system performance at that moment.
Even if the data volume is huge ,there are chances of the activation failing..
Try repeating the activation once again.it might succeed..
Else check the logs to understand the actual issue.

Getting an error while viewing a data in owb

Hi,
I created an External table based on a flat file. But I am not able to view the data in the external table while the flat file has the data.
I am using this external table as a source in my mapping but no data is getting loaded even after the successful execution of the mapping.I am getting the following error while viewing the data
ORA-29913: error in executing ODCIEXTTABLEFETCH callout
ORA-29400: data cartridge error
KUP-04040: file ATLAS in ATLAS_LOCATION1 not found
Please help me regarding this. I am new to the owb 11g.

Thanks for you reply. Still I can't view the data. Actually what i did is imported a .csv file using files then created a external table configured , validated and deployed.In next step created a mapping with this excel this using table operator validated and genrated code. In next step using the control center manager i deployed it. But i can't view the data still in the external table.
Is this procedure is correct for loading the excel sheet in to databse. My client environment is on windows xp and database is on linux environment.
Please help me regarding this.I am new to owb.

Error while deleting master data (Message no. RSDMD118)

Dear all,
I am performing a test to create and delete new Company Codes in Consolidation Workbench.
Creation of new Company Codes went on successfully but deleting them give me the following error message upon saving:
Error while deleting master data
Message no. RSDMD118
Since they are new Company Codes, they have not been used and stored in any BW cubes. Any idea on why BCS prevents me from deleting them?
Appreciate assistance to troubleshoot and resolve this error.
Thank you.

Thank you both for your replies.
I am sure those are not the case here as I deleted the Company immediately after creating it.
Just to make sure, I performed "Where-Used List" again and BCS confirmed that it is not being used anywhere:
Use of: Company UAT1 UAT Company 1
Number of Uses Found: 0
However, the same error message was displayed again after I tried to delete the Company and save the configuration. Still can't find any solid reason behind this.

Error while deleting the Data Source

Hi gurus,
I am getting an error while deleting a Data Source - "Source system XXXXX not found RSAR205".
but that source system no more available.
Is there any way to delete the Data Source.
Thanks in advance.
CK.

Hi,
That source system deleted.
Using RSDS also same error.
Thanks,
CK
Edited by: CK on Oct 3, 2008 11:37 AM

Error while extracting the data in R/3 production system,

Hi Team,
We got the following error while extracting the data in R/3 production system,
Error 7 When Sending an IDoc R3 3
No Storage space available for extending the inter 44 R3 299
No storage space available for extending the inter R3 299
Error in Source System RSM 340
Please guide us to fix the issue

It´s very difficult to help you without knowing
- what is going to be transferred
- where you get this error
- system configuration
- actual memory usage
- operating system
- database and configuration etc. etc.etc. etc.
I suggest you open an OSS call and let the support have a look on your system. It´s much easier if one has system access to find out the cause for that problem.
Markus

Error while creating requirements data in pendulum list indirect sales.

hi all,
i am getting the following error while creating requirement data in pendulum list indirect sales. t - code - /BEV4/PLAN
" ERROR OCCURED WHILE DETERMINING PERIOD IDENTIFIER""
-- help would be much appreciated..
thanks in advance
leo

var spObj = $().SPCascade({
destListColTitles: ['Continent','Country','State','City'],
srcListColInternalNames: ['Continent','Country','State','Title'],
srcListName: 'CitiesLookupList',
srcListFilterCAMLQuery: "<Query><Where><Contains>
<FieldRef Name='Continent'/><Value Type='Text'>America</Value>
</Contains></Where></Query>"
spWebURL: 'http://sharepointurl',
getDataOnly: 'false',
debug: 'true',
});

Error while uploading the data using FM"upload"

Hi,
I encountering an error while uploading the data using text file with FM " UPLOAD"
The error is "File does not exist or cannot be opened "
But there is a file with name and extenstion right.
Regards
Vishnu

You have to create RC29P-IDNRK(var) using concatenate statement. Try this.
DATA: new_mark TYPE bdcdata-fnam.
CONCATENATE 'RC29P-IDNRK(' var ')' INTO new_mark.
PERFORM bdc_field USING new_mark W_BOM-QTY

Error while entering Applicant Data PB10

Similar Messages

Maybe you are looking for