Error while executing Initialize with Data Transfer for 0FI_GL_10
Hello All,
Post Pre prod refresh, our timestamp for the datasource 0FI_GL_10 got reset. Due to which our deltas did not bring any records to the BW system.
First we did an Initialize without data transfer for all the BW related datasources. The deltas were then set properly for all datasources except 0FI_GL_10.
We then raised a message to SAP and they suggested to run the 'Initialize with data transfer' for 0FI_GL_10 so that the timestamp is set and accordingly the deltas are fixed.
The issue now is we are getting the following error message while running INIT with data transfer.
Job terminated in source system --> Request set to red
Message no. RSM078
We have copied the data till July 1st week of 2011.
Please advice. The issue is very critical.
Thanks & Regards
Sneha
Hi Arvind
Thanks for your inputs.
Please find below the details of the short dump.
Runtime Errors DBIF_RSQL_SQL_ERROR
Exception CX_SY_OPEN_SQL_DB
Date and Time 09/07/2011 11:25:32
Short text
SQL error in the database when accessing a table.
What can you do?
Note which actions and input led to the error.
For further help in handling the problem, contact your SAP administrator
You can use the ABAP dump analysis transaction ST22 to view and manage
termination messages, in particular for long term reference.
How to correct the error
Database error text........: "ORA-01652: unable to extend temp segment by 128
in tablespace PSAPTEMP"
Internal call code.........: "[RSQL/FTCH/FAGLFLEXT ]"
Please check the entries in the system log (Transaction SM21).
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
Information on where terminated
Termination occurred in the ABAP program "GP_GLX_FAGLFLEXT" - in
"FETCH_TO_ISTRUCTURE".
The main program was "SBIE0001 ".
In the source code you have the termination point in line 903
of the (Include) program "GP_GLX_FAGLFLEXT".
The program "GP_GLX_FAGLFLEXT" was started as a background job.
Job Name....... "BIREQU_4N3PZQ12IA0X0PYGEA85IG39S"
Job Initiator.. "BIWREMOTE"
Job Number..... 11203300
The termination is caused because exception "CX_SY_OPEN_SQL_DB" occurred in
procedure "FETCH_TO_ISTRUCTURE" "(FORM)", but it was neither handled locally
nor declared
in the RAISING clause of its signature.
The procedure is in program "GP_GLX_FAGLFLEXT "; its source code begins in line
840 of the (Include program "GP_GLX_FAGLFLEXT ".
Similar Messages
-
Difference between initialization with data transfer?
Dear Ones,
What is the Difference between initialization with data transfer,initialization without data transfer and early delta initialization?
Please explain me in senario basis..
Thanks
ShivaHello Shivananda,
See oss note 505700 :
The early delta initialization is used to admit document postings
in the OLTP system as early as possible during the initialization
procedure.
Regards,
Fred -
Error while executing bts_ConfigureBizTalkLogShipping with SQL Server 2012 and BTS 2013
Hi,
while configuring the DR site for Log shipping (http://msdn.microsoft.com/en-us/library/aa560961(v=bts.10).aspx)
exec bts_ConfigureBizTalkLogShipping @nvcDescription = '<MyLogShippingSolution>',
@nvcMgmtDatabaseName = '<BizTalkServerManagementDatabaseName>',
@nvcMgmtServerName = '<BizTalkServerManagementDatabaseServer>',
@SourceServerName = null, -- null indicates that this destination server restores all databases
@fLinkServers = 1 -- 1 automatically links the server to the management database
Getting errors while trying to execute the stored procedure "bts_ConfigureBizTalkLogShipping".
OLE DB provider "SQLNCLI11" for linked server "(null)" returned message "Login timeout expired".
OLE DB provider "SQLNCLI11" for linked server "(null)" returned message "A network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible.
Check if instance name is correct and if SQL Server is configured to allow remote connections. For more information see SQL Server Books Online.".
Msg -1, Level 16, State 1, Line 0
SQL Server Network Interfaces: Error Locating Server/Instance Specified [xFFFFFFFF].
This is very strange because with the same server name (which I am passing in above query) I am able to connect from SQL Server Studio from DR site.
Any help would be much appreciated.
Thanks!
Regards,
Gautam
Thanks! Regards, GautamYou need to check the DTC Connectivity between your DC and DR SQL Instance. The Linked Server requires DTC connectivity. Secondly this activity is better done from the SQL Server in question (the DC server in your case).
You can also manually add the Linked Server. Refer
http://msdn.microsoft.com/en-IN/library/ms188279(v=sql.105).aspx - Linking Servers and
http://msdn.microsoft.com/en-IN/library/ff772782(v=sql.105).aspx - Creating Linked Servers.
After having created the Linked Server(s) you can run the log shipping configuration again BUT using @fLinkServers = 0.
Regards. -
Error while activating the Master Data InfoSource for attributes
Hai
Im trying to load the attributes for master data characteristics .
I created the InfoSource and when im trying to activate it .
Then it gives the following error like below
Diagnosis
An error occurred in the program generation:
Program / Template: RSTMPL80
Error code / Action: 6
Row: 505
Message: The data object "P_S_COMM" has no component called
Procedure
If the problem occurred during the data load or transport, activate the transfer rule.
If the problem persists, search in the SAP note system under 'RSAR 245'
So please tell the what is the error and how to resolve this issue.
And pls give the error 'RSAR 245' message from SAP note system.
I will assign the points
bye
rizwanhi Rizwan,
check if helps Note 602318 - RSAR 245 error analysis with RSTMPL80
Summary
Symptom
The process of generating transfer rules or loading data terminates with error RSAR 245.
The long text for error message RSAR 245 indicates the cause of the generation error.
1. Error code: 6
a) Message: The P_S_COMM data object has no component
This is very likely to be due to an 'obsolete' communication structure.
b) Message: <table name> is already declared.
c) Other messages
2. Error code: 7
Other terms
RSAR245, RSAR 245, activate transfer structure, monitor, request
Solution
1. Error code: 6
a) 'Obsolete' communication structure:
Due to an optimization algorithm, pressing the 'Generating button' does not have any affect on the communication structure. Therefore, use the following workaround:
Select 'Communication structure' -> 'Change'.
Add any InfoObject (for example, '0MATERIAL') to the communication structure -> 'ENTER'.
Communication structure ---> 'Save'
Selet the InfoObject you inserted and delete it.
Communication structure ---> 'Save'
Communication structure -> 'Generate'.
a) Message: <table name> is already declared. Check whether the local part of your routines contains TABLE statements. TABLE statements always have global validity and should therefore be in the global part of the routine.
b) If the error occurs when data is being loaded, the transfer rule should be generated using RSA1.
In many cases, generating transfer rules using RSA1 results in a detailed error message.
2. Error code:
Program to be generated is locked by parallel process.
This error can sporadically occur if parallel processes simultaneously try to generate the same program.
Unfortunately, you cannot completely prevent the error from occurring since these types of lock situations can still crop up during data loading in parallel processes. We are currently working on improving system stability relating to lock situations during the load task.
Reloading usually works without any problems. -
Error while executing WDA with PDf form
Hi,
when i'm executing WDA with PDF form i'm getting the following error message.
i've checked for Reader credential properties from Basis, they say evething is okay.
http://help.sap.com/saphelp_nw2004s/helpdata/en/56/f2c94a069f44a785b85748e11f82a0/content.htm
what must be theproblem.
Also when i execute other WDA application with PDF it is generating PDF .
pls help.
Error when processing your request
What has happened?
The URL http://dv1d11.corp.abc.pvt:8011/sap/bc/webdynpro/sap/zktest_pdf_try3/ was not called due to an error.
Note
The following error text was processed in the system D11 : WebDynpro Exception: ADS: com.adobe.ProcessingException: Could not retrieve a password for credential: ReaderRights(200,101).
The error occurred on the application server dv1d11_D11_11 and in the work process 2 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: RAISE of program CX_WD_GENERAL=================CP
Method: CREATE_PDF of program CL_WD_ADOBE_SERVICES==========CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/LADOBE==================CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/LADOBE==================CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L7STANDARD==============CP
Method: CONV_VIEW_INTO_VE_ADAPTER_TREE of program CL_WDR_INTERNAL_WINDOW_ADAPTERCP
Method: SET_CONTENT_BY_WINDOW of program CL_WDR_INTERNAL_WINDOW_ADAPTERCP
Method: RENDER_WINDOWS of program CL_WDR_CLIENT_SSR=============CP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system D11 in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server dv1d11_D11_11 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 2 in transaction ST11 on the application server dv1d11_D11_11 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 100 -u: 09039694 -l: E -s: D11 -i: dv1d11_D11_11 -w: 2 -d: 20081007 -t: 162655 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework TeamWhen you tried other WDAs with PDFs, where they interactive PDFs? The reader rights are only needed for interactive PDFs.
>WebDynpro Exception: ADS: com.adobe.ProcessingException: Could not retrieve a password for credential: ReaderRights(200,101).
That error message would sure to seem to point that the credentials are not accessible to the user that ADS webservice call is being made by. That would certainly seem to me to point to a configuration problem at the Basis level. -
Error while posting GR with MvT 835 for Brazil Plant using transaction MBSU
Hi,
While posting GR with MvT 835 through transaction MBSU with reference to GI document, we are receiving below error :-
Balance not zero: **** - debit: ****
credit: ****
Message No.: M7050.
We are using TAXBRA procedure for Brazil.
We request you to please let us know what all configuration do we need to check.
Regards,
KiranAnswered.
-
Error while executing the reversal in KO88 for an internal order
Hi Experts,
I am getting the below error while doing the Actual settlement : order reverse through t code KO88. we are currently using the SAP ECC 5.0 and i found the SAP notes 215944 and 335428, which are upto release 4.6C.
System error - deletion not possible
Message no. AAPO186
i can see that the doc has generated for the settlement and for reversal it is giving the error. Can some one help me who has faced this type of problem earlier.
Thanks & Regards,
VenkatHi,
Additionally, try to check 300273 note.
Regards,
Eli -
Error while executing Query with Variable.
Hi All,
I have written a query to fetch values from some user tables and sap tables. The query is as below.
select a.docentry,a.u_scname,e.block,e.[City],
e.[Country], e.[State1],
e.[StreetNo], e.[ZipCode],
e.[Building], e.[Cellular],a.[U_WONo], a.[U_DocDate],
a.[UserSign], b.[LineId], b.[U_Des],
b.[u_SDes], b.[U_UoM],
b.[U_Qty], b.[U_Rte],
b.[U_Tamt], a.[U_PrjName], a.[u_WO_PB],
a.[U_WO_UL], a.[U_WO_FC],
a.[U_WO_PYT], a.[U_WO_COP],
a.[U_WO_TRMT], a.[U_WO_DocSub],
a.[U_WO_ADV], a.[U_WO_OCondition],
a.[U_WO_PRPBY], a.[U_WO_RCMBY],e.[CntctPrsn],
(T4.[WhsName]+ '-' + T4.[Street] +'-' + T4.[Block]) as 'Work Address ',
T4.[Building], T4.[City],
T4.[ZipCode], T4.[U_PMCNT], T4.[WhsName], e.Taxid0
from [@e360_owor] as a join [@e360_wor1] as b
on a.docentry = b.docentry
left outer join
( select c.cardname,d.TaxId0,d.Taxid1, c.block, c.[City],
c.[Country], c.[State1],
c.[StreetNo], c.[ZipCode],
c.[Building], c.[Cellular], c.[CntctPrsn] from ocrd
as c join crd7 as d on c.cardcode = d.cardcode
where d.TaxId0 is not <b>null</b> ) as e
on
a.U_SCName = e.CardName
left outer join OWHS T4 on T4.[WhsName] = a.[U_Prj]
where
a.U_WONo = '[%0]'
In this code, when the variable is assigned to field U_WONo, then I get an error
Must Specify A Table To Select From. Statement 'Service Contractors' (OCTR) (s) could nto be prepared.
But when the values for variables are hard coded, the query executes.
I have been working on it from long time, but same error exists. Could anybody help resolve the same...
I am using SAP B1 2007 B, patch level 15.
Thanks in advance,
Regards
RohanThe error messages may be misleading. With complicated queries with parameter request I frequently saw references to service contract (or something other).
Sometimes SBO does not manage correctly variables in complicated queries and there is a note about the workaround to solve the problem:[Note730960|https://websmp130.sap-ag.de/sap/bc/bsp/spn/sapnotes/index2.htm?numm=730960] -
Error while executing mapping with 500 K records
Hi,
I have a mapping which has couple of transformation operators (Procedures) and some joiners and a splitter. The operation mode is set based fail over to row based. The target is set to update/insert. The target has about 20 fields.
I am loading about 500k records from source to target. I get the following error"
unable to extend segment by 4 in undo tablespace". My DBA has set 14 gigs space for the tablespace.
Can anybody provide pointers/ideas why this is happening and how can I overcome this.
My target and source are on Oracle 10g R2 and OWB is also 10g R2.
Thanks a lot in advance!
MaruthiHi, Maruthi!
Running OWB 10.1.0.4 on an Oracle 10gR1 database we had similar problems with UNDO tablespaces.
One reason could be that the UNDO tablespace is too small, but 500K rows with 20 columns do not seem very large to me (of course it depends on the column types, but I suppose they are mainly some NUMBERs, VARCHARs or DATEs).
You could use TOAD to have a quick look at the tablespaces or use the following statement:
SELECT *
FROM dba_data_files
WHERE tablespace_name = 'SYS_UNDO';
Another reason could be improper UNDO Management settings.
You should contact the DBA to check them to fit the application's requirements.
Regards,
Günther -
Short dump while executing job SM:EXEC SERVICES for EWA alert generation
Hello All,
I'm getting short dump error while executing job SM:EXEC SERVICES for EWA alert generation.I'm using EHP1@SP22 of Sol Man.
Please find the logs
Error in the ABAP Application Program
The current ABAP program "SAPLDSVAS_PROC" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "RDSVASCABAP_TRANS__________073
" in include "RDSVASIABAP_TRANS__________073 " in
line 1782:
"Field "STATEMENT_SUMMARY001019" is unknown. It is neither in one of th"
"e specified tables nor defined by a "DATA" statement. "DATA" statement"
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "SAPLDSVAS_PROC" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
If anyone came across such kind of dump, please reply asap, due to this, i could not generate EWA report for R/3 system 6.04.
Thanks,
Anand.>
Anand Tigadikar wrote:
> Thx Paul, but i already did checked this note and its not solving my issue
Dear Anand,
Did you perform a complete service definition replacement for SDCC/SDCCN as described in the note?
These are manual steps you need to perform on the system and are not code corrections.
I would suggest you perform it, if you have not, and check the SDCCN logs to review the process ran cleanly.
Note: Please make sure SDCC_OSS is functioning and a connection to SAP can be made before
deleting the service definitions.
If you have already replaced the service defintions on the Solution Manager system, then no point doing it again. However checking a note and applying it are not the same thing. So I am uncertain if you replaced the service definitions or not. The dump you are getting in SM:EXEC SERVICES suggests its due to a problem with the service definitons. The recommendation is to replace them according to the process described in SAP Note 727998. If you have not done so please do so.
If you have successfully replaced the service definitions are you still getting the same dump, or has it possibly changed?
Regards,
Paul -
Web Analysis Error -- Error while executing query and retrieving data
Regarding Web Analysis:
We have a number of reports that we created. yesterday they were all working fine. today we try to open them and most are generating an error.
The error is:
Error while executing query and retrieving data.; nested exception is:
com.hyperion.ap.APException: [1033] Native:
1013033[Thu Oct 22 09:08:17
2009]server name/application name/database name/user name/Error91013033)
ReportWriter exit abnormally
Does anyone have any insight into what is going on?
My version information is:
Hyperion System 9 BI+ Analytic Administration Services 9.3.0.1.1 Build 2
Web Analysis 9.3.0.0.0.286
Thanks in advance for your help.
DaveWHi,
And also click on check option by opening the query in Query designer,as Mr . Arun suggested.
And if you get any error in checking, see the long message(detail).
With rgds,
Anil Kumar Sharma .P -
Error while executing SDM process phase with action DEPLOY_SLOT
Hi,
I am upgrading CRM 2007 to CRM 7.0 and got an error in Java side.
Following is DEPLOY_SLOT_1_DON_01.LOG
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[1.5.3.7185 - 630]/>
<!NAME[C:\usr\sap\jupgrade\log\DEPLOY_SLOT_1__DON_01.LOG]/>
<!PATTERN[DEPLOY_SLOT_1__DON_01.LOG]/>
<!FORMATTER[com.sap.tc.logging.TraceFormatter(%24d %s: %m)]/>
<!ENCODING[UTF8]/>
<!LOGHEADER[END]/>
May 20, 2009 4:15:48 AM Info:
May 20, 2009 4:15:48 AM Info: ============================================
May 20, 2009 4:15:48 AM Info: = Starting to execute command 'deploy' =
May 20, 2009 4:15:48 AM Info: ============================================
May 20, 2009 4:15:48 AM Info: Starting SDM - Software Deployment Manager...
May 20, 2009 4:15:49 AM Info: tc/SL/SDM/SDM/sap.com/SAP AG/7.0103.20081105085605.0000
May 20, 2009 4:15:51 AM Info: SDM operation mode successfully set to: Standalone
May 20, 2009 4:15:52 AM Info: Initializing Network Manager (50017)
May 20, 2009 4:15:52 AM Info: Checking if another SDM is running on port 50018
May 20, 2009 4:15:53 AM Info: -
Starting deployment -
May 20, 2009 4:15:53 AM Info: Error handling strategy: OnErrorSkipDepending
May 20, 2009 4:15:53 AM Info: Prerequisite error handling strategy: OnPrerequisiteErrorStop
May 20, 2009 4:15:53 AM Info: Update strategy: UpdateLowerVersions
May 20, 2009 4:15:53 AM Info: Starting deployment prerequisites:
May 20, 2009 4:15:55 AM Info: Loading selected archives...
May 20, 2009 4:15:55 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\ADSSAP03_0.SCA'
May 20, 2009 4:16:43 AM Info: Loading archive '
nbg-dev-cd1\sapmnt\trans\EPS\in\BIBASES16_0-10003477.SCA'
May 20, 2009 4:16:48 AM Info: Loading archive '
nbg-dev-cd1\sapmnt\trans\EPS\in\BIIBC16_0-10003495.SCA'
May 20, 2009 4:16:50 AM Info: Loading archive '
nbg-dev-cd1\sapmnt\trans\EPS\in\BIREPPLAN16_0-10002878.SCA'
May 20, 2009 4:17:00 AM Info: Loading archive '
nbg-dev-cd1\sapmnt\trans\EPS\in\BIWDALV16_0-10003475.SCA'
May 20, 2009 4:17:02 AM Info: Loading archive '
nbg-dev-cd1\sapmnt\trans\EPS\in\BIWEBAPP16_0-10003476.SCA'
May 20, 2009 4:17:13 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\BIMMR03_0.SCA'
May 20, 2009 4:17:24 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\BIUDI03_0.SCA'
May 20, 2009 4:17:31 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\BPCRMAPP02_0.SCA'
May 20, 2009 4:17:35 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\BPCRMFND02_0.SCA'
May 20, 2009 4:17:37 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\CAF03_0.SCA'
May 20, 2009 4:18:02 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\CAFKM03_0.SCA'
May 20, 2009 4:18:04 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\CAFUM03_0.SCA'
May 20, 2009 4:18:08 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\CRMAPP02_0.SCA'
May 20, 2009 4:18:09 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\CRMFND02_1.SCA'
May 20, 2009 4:18:10 AM Info: Loading archive '
nbg-dev-cd1\sapmnt\trans\EPS\in\DICBS16_0-10003500.SCA'
May 20, 2009 4:18:13 AM Info: Loading archive '
nbg-dev-cd1\sapmnt\trans\EPS\in\DICMS16_0-10003499.SCA'
May 20, 2009 4:18:20 AM Info: Loading archive '
nbg-dev-cd1\sapmnt\trans\EPS\in\DIDTR16_0-10003501.SCA'
May 20, 2009 4:18:26 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\EPPSERV03_0.SCA'
May 20, 2009 4:18:43 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\EPWDC03_0.SCA'
May 20, 2009 4:18:45 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\EPBC203_0.SCA'
May 20, 2009 4:18:50 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\KMKWJIKS03_0.SCA'
May 20, 2009 4:18:51 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\KMCBC03_0.SCA'
May 20, 2009 4:18:56 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\KMCCM03_0.SCA'
May 20, 2009 4:19:03 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\KMCCOLL03_0.SCA'
May 20, 2009 4:19:10 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\LMPORTAL03_0.SCA'
May 20, 2009 4:19:12 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\LMTOOLS03_01.SCA'
May 20, 2009 4:19:43 AM Error: There is already a component of the same type with identical name 'tc/cts/appl' and vendor 'sap.com' selected.
May 20, 2009 4:19:43 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\NETPDK03_0.SCA'
May 20, 2009 4:19:45 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\RTC03_0.SCA'
May 20, 2009 4:19:48 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\RTCSTREAM03_0.SCA'
May 20, 2009 4:19:49 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\SAPCRMAPP02_1.SCA'
May 20, 2009 4:20:55 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\SAPCRMDIC02_0.SCA'
May 20, 2009 4:21:00 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\SAPEU03_0.SCA'
May 20, 2009 4:21:39 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\SAPSHRAPP02_0.SCA'
May 20, 2009 4:23:18 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\SWLIFECYCL03_0.SCA'
May 20, 2009 4:23:24 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\UMEADMIN03_0.SCA'
May 20, 2009 4:23:27 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\UWLJWF03_0.SCA'
May 20, 2009 4:23:33 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\VCBASE03_0.SCA'
May 20, 2009 4:23:37 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\VCFLEX03_0.SCA'
May 20, 2009 4:23:54 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\VCFRAMEWORK03_0.SCA'
May 20, 2009 4:23:58 AM Info: Loading archive '
nbg-dev-cd1\sapmnt\trans\EPS\in\VCKITBI16_0-10003603.SCA'
May 20, 2009 4:23:59 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\VCKITGP03_0.SCA'
May 20, 2009 4:24:00 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\VCKITXX03_0.SCA'
May 20, 2009 4:24:02 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\WDEXTENSIONS03_0.SCA'
May 20, 2009 4:24:05 AM Error: Error while loading selected archives.
May 20, 2009 4:24:05 AM Error: Prerequisites were aborted.
May 20, 2009 4:24:13 AM Error: Error while loading selected archives.
May 20, 2009 4:24:13 AM Info: Summarizing the deployment results:
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\ADSSAP03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial:
nbg-dev-cd1\sapmnt\trans\EPS\in\BIBASES16_0-10003477.SCA
May 20, 2009 4:24:13 AM Error: Initial:
nbg-dev-cd1\sapmnt\trans\EPS\in\BIIBC16_0-10003495.SCA
May 20, 2009 4:24:13 AM Error: Initial:
nbg-dev-cd1\sapmnt\trans\EPS\in\BIREPPLAN16_0-10002878.SCA
May 20, 2009 4:24:13 AM Error: Initial:
nbg-dev-cd1\sapmnt\trans\EPS\in\BIWDALV16_0-10003475.SCA
May 20, 2009 4:24:13 AM Error: Initial:
nbg-dev-cd1\sapmnt\trans\EPS\in\BIWEBAPP16_0-10003476.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\BIMMR03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\BIUDI03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\BPCRMAPP02_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\BPCRMFND02_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\CAF03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\CAFKM03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\CAFUM03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\CRMAPP02_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\CRMFND02_1.SCA
May 20, 2009 4:24:13 AM Error: Initial:
nbg-dev-cd1\sapmnt\trans\EPS\in\DICBS16_0-10003500.SCA
May 20, 2009 4:24:13 AM Error: Initial:
nbg-dev-cd1\sapmnt\trans\EPS\in\DICMS16_0-10003499.SCA
May 20, 2009 4:24:13 AM Error: Initial:
nbg-dev-cd1\sapmnt\trans\EPS\in\DIDTR16_0-10003501.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\EPPSERV03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\EPWDC03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\EPBC203_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\KMKWJIKS03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\KMCBC03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\KMCCM03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\KMCCOLL03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\LMPORTAL03_0.SCA
May 20, 2009 4:24:13 AM Error: Precondition violated: C:\usr\sap\jupgrade\data\archives\LMTOOLS03_01.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\NETPDK03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\RTC03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\RTCSTREAM03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\SAPCRMAPP02_1.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\SAPCRMDIC02_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\SAPEU03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\SAPSHRAPP02_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\SWLIFECYCL03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\UMEADMIN03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\UWLJWF03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\VCBASE03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\VCFLEX03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\VCFRAMEWORK03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial:
nbg-dev-cd1\sapmnt\trans\EPS\in\VCKITBI16_0-10003603.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\VCKITGP03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\VCKITXX03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\WDEXTENSIONS03_0.SCA
May 20, 2009 4:24:13 AM Error: Processing error. Return code: 4
It appears to me that somehow there is a component conflict:
May 20, 2009 4:19:12 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\LMTOOLS03_01.SCA'
May 20, 2009 4:19:43 AM Error: There is already a component of the same type with identical name 'tc/cts/appl' and vendor 'sap.com' selected.
May 20, 2009 4:19:43 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\NETPDK03_0.SCA'
Is it advisable at all to manually delete the above LMTOOLS03_01.SCA from the location and try again or this will lead to more errors?
Please help ASAP, thanks a lot,
ShivalFollowing is the trouble ticket information:
Trouble Ticket Report
Upgrade to Enhancement Package 1 SR1 for SAP NetWeaver/ SAP Business Suite 7 SR1
SID................: CD1
Hostname...........: nbg-dev-cd1
Install directory..: c:/usr/sap/CD1
Upgrade directory..: C:\usr\sap\jupgrade
Database...........: SAP DB
Operating System...: NT
JDK version........: 1.4.2_15 Sun Microsystems Inc.
SAPJup version.....: 1.5.6
Source release.....: 700
Target release.....: 700
Current usages.....: AS;EP;EPC;BP-CRM;JCRM;AAS
ABAP stack present.: true
The execution of UPGRADE/UPGRADE/DEPLOY_ONLINE ended in error.
Error while executing SDM process phase with action DEPLOY_SLOT. See C:\usr\sap\jupgrade\log\DEPLOY_SLOT_1__DON_01.LOG for details.
Cannot execute Java process for deployList with parameters C:/usr/sap/jupgrade/tmp/SLOT.DEPLOY.LST.
Return code condition success evaluated to false for process java.exe for action ACTION_DEPLOY_LIST.
More information can be found in the log file C:\usr\sap\jupgrade\log\DEPLOY_ONLINE_DON_01.LOG.
Use the information provided to trouble-shoot the problem. There might be an OSS note providing a solution to this problem. Search for OSS notes with the following search terms:
com.sap.sdt.j2ee.phases.PhaseTypeSDMProcess
com.sap.sdt.ucp.phases.PhaseException
Error while executing SDM process phase with action DEPLOY_SLOT. See C:\usr\sap\jupgrade\log\DEPLOY_SLOT_1__DON_01.LOG for details.
DEPLOY_ONLINE
UPGRADE
NetWeaver Upgrade
SAPJup
Java Upgrade -
Lsmw error 'Specify Files first' while executing option 'Read Data'.
Hi All,
while trying to create mass users through LSMW, i am gettign the error 'Specify Files first' while executing option 'Read Data'.
I have specified file (.txt), manually created (with'1 tab space' between each term). i have used option 'On the PC(Frontend)'. No error while saving.
Next- i have executed 'Assign Files', where the file appeared automatically.
Next- Here, when i try to execute 'Read Data', i get the error 'Specify Files first'.
Can anyone help in resolving this error.Hello Plaban,
What is your purpose? Are you tring to upload the data with more file variant?
There are two possibilities to make file names more variable:
1.If you choose system dependent file names by setting the according flag (in the first step 'Maintain object attributes'), you can define file names for each system in step 'Specify files' by assigning the files to a specific system ID (with a double-click on the specified file).
2.You can use wildcards in the file names where you can assign several values.
I hope this helps you.
Regards,
Blanca -
Error while executing the Job for Objects :null Batch Risk Analysis
Hi All,
We've recently upgraded Virsa to version 5.3_14 . I'm encountering a problem when executing the Batch Risk Analysis job for users, roles and profiles. The job does not complete for some objects and it seems to be sporadic and shows this error: -
Background Job History: job id=395, status=2, message=Error while executing the Job for Object(s) :ABROWN:null
I've attached the log for your review.
Thanks in advance for your help.
Linda Lewis
Feb 9, 2011 1:47:53 PM com.virsa.cc.xsys.meng.ObjAuthMatcher <init>
FINEST: ObjAuthMatcher constructed: 4ms, #singles=2141, #ranges=0, #super=0
Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.riskanalysis.AnalysisEngine riskAnalysis
WARNING: Job ID:395 : Failed to run Risk Analysis
java.lang.StringIndexOutOfBoundsException at java.lang.String.substring(String.java:1019)
at com.virsa.cc.xsys.util.RuleLoader.getPermRule(RuleLoader.java:573)
at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.performActPermAnalysis(AnalysisEngine.java:1609)
at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.riskAnalysis(AnalysisEngine.java:321)
at com.virsa.cc.xsys.bg.BatchRiskAnalysis.performBatchRiskAnalysis(BatchRiskAnalysis.java:1166)
at com.virsa.cc.xsys.bg.BatchRiskAnalysis.performBatchSyncAndAnalysis(BatchRiskAnalysis.java:1464)
at com.virsa.cc.xsys.bg.BgJob.runJob(BgJob.java:560)
at com.virsa.cc.xsys.bg.BgJob.run(BgJob.java:363)
at com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob.scheduleJob(AnalysisDaemonBgJob.java:375)
at com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob.start(AnalysisDaemonBgJob.java:92)
at com.virsa.cc.comp.BgJobInvokerView.wdDoModifyView(BgJobInvokerView.java:444)
at com.virsa.cc.comp.wdp.InternalBgJobInvokerView.wdDoModifyView(InternalBgJobInvokerView.java:1236)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doModifyView(DelegatingView.java:78)
at com.sap.tc.webdynpro.progmodel.view.View.modifyView(View.java:337)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.doModifyView(ClientComponent.java:481)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doModifyView(WindowPhaseModel.java:551)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:148)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:332)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:741)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:694)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:253)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(AccessController.java:207)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.util.Lock lock
FINEST: Lock:1004
Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.util.Lock unlock
FINEST: Unlock:1004
Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.bg.BatchRiskAnalysis performBatchRiskAnalysis
WARNING: Error: while executing BatchRiskAnalysis for JobId=395 and object(s):ABROWN: Skipping error to continue with next object: null Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.bg.BgJob updateJobHistory
FINEST: --- @@@@@@@@@@@ Updating the Job History -
2@@Msg is Error while executing the Job for Object(s) :ABROWN:null
Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.bg.dao.BgJobHistoryDAO insert
INFO: -
Background Job History: job id=395, status=2, message=Error while executing the Job for Object(s) :ABROWN:null
Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.util.Lock lock
FINEST: Lock:1004
Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.util.Lock unlock
FINEST: Unlock:1004
Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.bg.BatchRiskAnalysis performBatchRiskAnalysis
INFO: --- BKG User Permission Analysis (System: P20:020) completed --- elapsed time: 4522 ms
Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.util.Lock lock
Edited by: Linda Lewis on Feb 9, 2011 9:08 PMHi,
Was a solution found for this error?
Thanks,
Glen -
Error while executing procedure for excel upload
Hi Friends
Pl. find below error while executing procedure for loading excel data. pl. verify and suggest for any changes in the format of data.
Rgds
SriGIf reading Excel as a database you would use "Access LSLINK"
Access external means you are reading a file. I don't think it is possible to treat Excel as a file because the internal structure is complex.
In the past I have saved the Excel as a CSV or as a Tab delimeted file. Then I use something like
ACCESS External
USE &filename
BEGIN
DESCRIPTION free ,
Variables text 20
Organisation text 20
'July 2008' numeric 20
'August 2008' numeric 20
'September 2008' numeric 20
'October 2008' numeric 20
'November 2008' numeric 20
'December 2008' numeric 20
'January 2009' numeric 20
'February 2009' numeric 20
'March 2009' numeric 20
'April 2009' numeric 20
'May 2009' numeric 20
'June 2009' numeric 20
END
peek
read
... quit the access sub system
END
Maybe you are looking for
-
Sending report output via E-mail (excel pivoted format)
Hi all, i have a written a report where i need to send the report output to somebody via E-mail.i am sending this report output via E-mail successfully.The receiver receives, my output in excel format.but this excel is not <b>pivoted</b>. i want , th
-
In PR GL a/c and commitment Item change
Hi Guru, Whenever we select any GL code in PR, automatically system picks the relevant commitment no. & if we change the GL code, commitment no. doesn't get change. I think commitment no. should get change with the change of GL code. but in our syste
-
Is adobe acrobat 9 professional compatible Windows 7
is adobe acrobat 9 professional compatible Windows 7
-
Invoice posting - which Dr's and Cr's are made?
I am trying to understand how SAP posts standard invoices, from a Double Entry or T Accounting aspect. If I post an invoice to a supplier, I can see it posts a credit to the vendor account number, and a debit to a GL code, normally with a cost centre
-
Can I call a stored procedure from EJB?
Hi, Can I call a regular (non-Java) stored procedure from an enterprise Java bean? Transaction is managed by the ejb application server. Thank you for your response. CT