Error while executing Job
Hi All,
I am facing an error while trying to run a job for IDOC data posting in to SAP ECC 6.0.
XML source in data flow <Query> could not process the XML data .Notify Customer Support
Anyone has got this scenario. Please suggest any inputs.
Thanks
Phaneendranadh K
Hi,
If CI & DB are on different host this error normally occures.SAP return codes 236 means no connection to gateway, can you check it?
Also check whether TCP/IP RFC connection SAPXPG_DBDEST_* is working fine or not.If it is not working fine then please check whether you have mentioned below details
Program sapxpg
Target Host DB Host name
Gateway Host DB host/gateway host
Gateway service sapgw##
Also refer SAP Note 108777 - CCMS: Message 'SAPXPG failed for BRTOOLS' & Note 446172 - SXPG_COMMAND_EXECUTE (program_start_error) in DB13
Hope this helps.
Thanks,
Sushil
Similar Messages
-
Short dump while executing job SM:EXEC SERVICES for EWA alert generation
Hello All,
I'm getting short dump error while executing job SM:EXEC SERVICES for EWA alert generation.I'm using EHP1@SP22 of Sol Man.
Please find the logs
Error in the ABAP Application Program
The current ABAP program "SAPLDSVAS_PROC" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "RDSVASCABAP_TRANS__________073
" in include "RDSVASIABAP_TRANS__________073 " in
line 1782:
"Field "STATEMENT_SUMMARY001019" is unknown. It is neither in one of th"
"e specified tables nor defined by a "DATA" statement. "DATA" statement"
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "SAPLDSVAS_PROC" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
If anyone came across such kind of dump, please reply asap, due to this, i could not generate EWA report for R/3 system 6.04.
Thanks,
Anand.>
Anand Tigadikar wrote:
> Thx Paul, but i already did checked this note and its not solving my issue
Dear Anand,
Did you perform a complete service definition replacement for SDCC/SDCCN as described in the note?
These are manual steps you need to perform on the system and are not code corrections.
I would suggest you perform it, if you have not, and check the SDCCN logs to review the process ran cleanly.
Note: Please make sure SDCC_OSS is functioning and a connection to SAP can be made before
deleting the service definitions.
If you have already replaced the service defintions on the Solution Manager system, then no point doing it again. However checking a note and applying it are not the same thing. So I am uncertain if you replaced the service definitions or not. The dump you are getting in SM:EXEC SERVICES suggests its due to a problem with the service definitons. The recommendation is to replace them according to the process described in SAP Note 727998. If you have not done so please do so.
If you have successfully replaced the service definitions are you still getting the same dump, or has it possibly changed?
Regards,
Paul -
Error while executing the Job for Objects :null Batch Risk Analysis
Hi All,
We've recently upgraded Virsa to version 5.3_14 . I'm encountering a problem when executing the Batch Risk Analysis job for users, roles and profiles. The job does not complete for some objects and it seems to be sporadic and shows this error: -
Background Job History: job id=395, status=2, message=Error while executing the Job for Object(s) :ABROWN:null
I've attached the log for your review.
Thanks in advance for your help.
Linda Lewis
Feb 9, 2011 1:47:53 PM com.virsa.cc.xsys.meng.ObjAuthMatcher <init>
FINEST: ObjAuthMatcher constructed: 4ms, #singles=2141, #ranges=0, #super=0
Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.riskanalysis.AnalysisEngine riskAnalysis
WARNING: Job ID:395 : Failed to run Risk Analysis
java.lang.StringIndexOutOfBoundsException at java.lang.String.substring(String.java:1019)
at com.virsa.cc.xsys.util.RuleLoader.getPermRule(RuleLoader.java:573)
at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.performActPermAnalysis(AnalysisEngine.java:1609)
at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.riskAnalysis(AnalysisEngine.java:321)
at com.virsa.cc.xsys.bg.BatchRiskAnalysis.performBatchRiskAnalysis(BatchRiskAnalysis.java:1166)
at com.virsa.cc.xsys.bg.BatchRiskAnalysis.performBatchSyncAndAnalysis(BatchRiskAnalysis.java:1464)
at com.virsa.cc.xsys.bg.BgJob.runJob(BgJob.java:560)
at com.virsa.cc.xsys.bg.BgJob.run(BgJob.java:363)
at com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob.scheduleJob(AnalysisDaemonBgJob.java:375)
at com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob.start(AnalysisDaemonBgJob.java:92)
at com.virsa.cc.comp.BgJobInvokerView.wdDoModifyView(BgJobInvokerView.java:444)
at com.virsa.cc.comp.wdp.InternalBgJobInvokerView.wdDoModifyView(InternalBgJobInvokerView.java:1236)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doModifyView(DelegatingView.java:78)
at com.sap.tc.webdynpro.progmodel.view.View.modifyView(View.java:337)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.doModifyView(ClientComponent.java:481)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doModifyView(WindowPhaseModel.java:551)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:148)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:332)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:741)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:694)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:253)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(AccessController.java:207)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.util.Lock lock
FINEST: Lock:1004
Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.util.Lock unlock
FINEST: Unlock:1004
Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.bg.BatchRiskAnalysis performBatchRiskAnalysis
WARNING: Error: while executing BatchRiskAnalysis for JobId=395 and object(s):ABROWN: Skipping error to continue with next object: null Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.bg.BgJob updateJobHistory
FINEST: --- @@@@@@@@@@@ Updating the Job History -
2@@Msg is Error while executing the Job for Object(s) :ABROWN:null
Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.bg.dao.BgJobHistoryDAO insert
INFO: -
Background Job History: job id=395, status=2, message=Error while executing the Job for Object(s) :ABROWN:null
Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.util.Lock lock
FINEST: Lock:1004
Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.util.Lock unlock
FINEST: Unlock:1004
Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.bg.BatchRiskAnalysis performBatchRiskAnalysis
INFO: --- BKG User Permission Analysis (System: P20:020) completed --- elapsed time: 4522 ms
Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.util.Lock lock
Edited by: Linda Lewis on Feb 9, 2011 9:08 PMHi,
Was a solution found for this error?
Thanks,
Glen -
Error while executing the Job:Cannot assign NULL to host variable 1
Hello!
I have the following issue:
Error while executing the Job:Cannot assign NULL to host variable 1. setNull() can only be used if the corresponding column is nullable. The statement is "INSERT INTO "VIRSA_... (see log for details)
Note 1362138 - Rule generation - null pointer exception virsa_cc_rtmap doesn't me. After uploading files of ZCC_DOWNLOAD_SAPOBJ and ZCC_DOWNLOAD_DESC I got the same problem during job running...
How can I find out where is the problem?Hi
That looks like your fields are disabled but they could still be causing the problem edited ( nah - talking rubbish as you've put dummy " " in there) edited - the 'null' error caused many background jobs to fail but, once we had the evidence to show the space (somebody had pressed enter instead of delete/backspace to clear the entry) it stopped the problem - just a bit of learning on the job which we all go through for the GRC chaps in KL.
A " " would be valid but a (I know you can't see it but it's there wouldn't be )
edited.When you did an edit/replace did it say it had replaced anything please?edited
The word doc option does sound good!
Cheers
David
Edited by: David Berry on Nov 4, 2010 7:33 PM -
Error while executing Batch Risk Analysis job in full sync mode
Hi Gurus,
I am getting following error while executing Batch Risk Analysis job in full sync mode for the first time, please help me out.
May 12, 2011 3:57:26 AM com.virsa.cc.multi.node.dao.NodeDAO deleteMTGenObjTable
INFO: In deleteMTGenObjTable() deleting from VIRSA_CC_MTGENOBJ for jobid = 100
May 12, 2011 3:59:53 AM com.virsa.cc.multi.node.dao.NodeDAO deleteMTGenObjTable
INFO: In deleteMTGenObjTable() deleting from VIRSA_CC_MTGENOBJ for jobid = 100
May 12, 2011 3:59:53 AM com.virsa.cc.xsys.bg.BatchRiskAnalysis performBatchSyncAndAnalysis
INFO: --- Batch Sync/Analysis/Mgmt Report completed --- elapsed time: 104907817 ms
May 12, 2011 3:59:53 AM com.virsa.cc.xsys.bg.BgJob setStatus
INFO: Job ID: 100 Status: Error
May 12, 2011 3:59:53 AM com.virsa.cc.xsys.bg.BgJob updateJobHistory
FINEST: --- @@@@@@@@@@@ Updating the Job History -
2@@Msg is Error Job not completed
May 12, 2011 3:59:53 AM com.virsa.cc.xsys.bg.dao.BgJobHistoryDAO insert
INFO: -
Background Job History: job id=100, status=2, message=Error Job not completed
May 12, 2011 3:59:53 AM com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob scheduleJob
INFO: -
Complted Job =>100----
May 12, 2011 3:59:53 AM com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob scheduleJob
INFO: Daemon idle time longer than RFC time out, terminating daemon [211288050]/usr/sap/DAC/JC21/j2ee/cluster/server0/. Thread ID 0
May 12, 2011 3:59:53 AM com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob start
INFO: Analysis Daemon ID [211288050]/usr/sap/DAC/JC21/j2ee/cluster/server0/. Thread ID 0 terminiated
May 12, 2011 4:00:35 AM com.virsa.cc.xsys.bg.AnalysisDaemonThread run
FINEST: Analysis Daemon Thread: Invoking (HTTP): http://10.66.218.68:52100/webdynpro/dispatcher/sap.com/grc~ccappcomp/BgJobStart?daemonId=[211288050]/usr/sap/DAC/JC21/j2ee/cluster/server0/.&threadId=0&daemonType=BG
May 12, 2011 4:01:36 AM com.virsa.cc.xsys.bg.AnalysisDaemonThread run
FINEST: Analysis Daemon Thread: Invoking (HTTP): http://10.66.218.68:52100/webdynpro/dispatcher/sap.com/grc~ccappcomp/BgJobStart?daemonId=[211288050]/usr/sap/DAC/JC21/j2ee/cluster/server0/.&threadId=0&daemonType=BG
May 12, 2011 4:02:37 AM com.virsa.cc.xsys.bg.AnalysisDaemonThread run
FINEST: Analysis Daemon Thread: Invoking (HTTP): http://10.66.218.68:52100/webdynpro/dispatcher/sap.com/grc~ccappcomp/BgJobStart?daemonId=[211288050]/usr/sap/DAC/JC21/j2ee/cluster/server0/.&threadId=0&daemonType=BG
May 12, 2011 4:02:37 AM com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob start
INFO: Analysis Daemon ID [211288050]/usr/sap/DAC/JC21/j2ee/cluster/server0/. Thread ID 0 started
May 12, 2011 4:02:38 AM com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob start
FINEST: Another Analysis Daemon ID [211288050]/usr/sap/DAC/JC21/j2ee/cluster/server0/. Thread ID 0 is already runningHi,
May be it worked in your case How the job names going to affect the execution of the job. The issue is purely because of RFC timeout (As per the logs). I recommend to change the parameter in the configuration tab as recommended by Sunny in the previous thread.
Regards,
Raghu -
Error while executing agent. ORABPEL-05006
Hi:
I have a bpel process waiting until a DbAdapter (with one Wait Activity) reads a record on database, but the problem is :
- The record is in the database
- The DbAdapter read it but the process don´t continue.
- If the process is monitored by the Bpel Console it seems like it is waiting for the expiration of the wait activity, but the expiration time is reached.
When i restart the OC4J_BPEL the process that was waiting , continues.
i was looking the log file of the oc4j and it throws the following exception, could anybody help me??
Thanks
Santiago Velez.
<2006-11-08 13:43:26,871> <INFO> <default.collaxa.cube.ws> <AdapterFramework::Outbound> file:/data2/middle/integration/orabpel/domains/default/tmp/.bpel_PG-ComunicacionATC_1.0.jar/InsertaAtcsComunicados.wsdl [ InsertaAtcsComunicados_ptt::insert(AtcsComunicadosCollection) ] - Using JCA Connection Pool - max size = <unbounded>
<ExpirationJob::execute> Error while executing agent.
An error occured while attempting to execute the job "111499-BpWai0-BpSwt1.22-1" for agent "scheduler". The exception reported was : Dispatcher schedule error.
An error occurred while scheduling a batch message with the dispatcher. The exception is: Failed to create "ejb/collaxa/system/DispatcherBean" bean; exception reported is: "javax.naming.NamingException: Not in an application scope - start Orion with the -userThreads switch if using user-created threads
at com.evermind.server.PreemptiveApplicationContext.getContext(PreemptiveApplicationContext.java:34)
at com.evermind.naming.FilterContext.lookup(FilterContext.java:138)
at javax.naming.InitialContext.lookup(InitialContext.java:347)
at com.collaxa.cube.engine.util.EngineBeanRegistry.lookupDispatcherBean(EngineBeanRegistry.java:137)
at com.collaxa.cube.engine.dispatch.DispatchHelper.scheduleRemote(DispatchHelper.java:348)
at com.collaxa.cube.engine.agents.ExpirationAgent$ExpirationJob.execute(ExpirationAgent.java:417)
at org.quartz.core.JobRunShell.run(JobRunShell.java:141)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:281)
ORABPEL-05006
Dispatcher schedule error.
An error occurred while scheduling a batch message with the dispatcher. The exception is: Failed to create "ejb/collaxa/system/DispatcherBean" bean; exception reported is: "javax.naming.NamingException: Not in an application scope - start Orion with the -userThreads switch if using user-created threads
at com.evermind.server.PreemptiveApplicationContext.getContext(PreemptiveApplicationContext.java:34)
at com.evermind.naming.FilterContext.lookup(FilterContext.java:138)
at javax.naming.InitialContext.lookup(InitialContext.java:347)
at com.collaxa.cube.engine.util.EngineBeanRegistry.lookupDispatcherBean(EngineBeanRegistry.java:137)
at com.collaxa.cube.engine.dispatch.DispatchHelper.scheduleRemote(DispatchHelper.java:348)
at com.collaxa.cube.engine.agents.ExpirationAgent$ExpirationJob.execute(ExpirationAgent.java:417)
at org.quartz.core.JobRunShell.run(JobRunShell.java:141)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:281)
at com.collaxa.cube.engine.dispatch.DispatchHelper.scheduleRemote(DispatchHelper.java:354)
at com.collaxa.cube.engine.agents.ExpirationAgent$ExpirationJob.execute(ExpirationAgent.java:417)
at org.quartz.core.JobRunShell.run(JobRunShell.java:141)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:281)anybody have comments on this????????????
-
Getting SP2-0306 error while executing a scrpt.
Hi all,
We are using oracle version 11GR2 .
I am getting the below error while executing a unix script which connect to DB and returns a value. Why we get such issues/ anything wrong in the setup ?
Same code working fine in old db. any idead how to resolve this?
SP2-0306: Invalid option. Usage: CONN[ECT] [{logon|/|proxy} [AS {SYSDBA|SYSOPER|SYSASM}] [edition=value]] where <logon> ::= <username>[/<password>][@<connect_identifier>] <proxy> ::= <proxyuser>[<username>][/<password>][@<connect_identifier>] ERROR: ORA-01017: invalid username/password; logon denied SP2-0306: Invalid option. Usage: CONN[ECT] [{logon|/|proxy} [AS {SYSDBA|SYSOPER|SYSASM}] [edition=value]] where <logon> ::= <username>[/<password>][@<connect_identifier>] <proxy> ::= <proxyuser>[<username>][/<password>][@<connect_identifier>] SP2-0157: unable to CONNECT to ORACLE after 3 attempts, exiting SQL*PlusPlease let me know if you need any details.
Thanks and Regards
NagarajaThanks for the response rp.
I am calling the script checkdbtoproceedjob from another script as below.
DBVALUE=`checkdbtoproceedjob ODS_LOAD $1` >> $LOGFILE
echo "dbvalue is "$DBVALUE
if [ $DBVALUE != "DBCONTINUE" ]
then
echo "**** job will be exited as db says no *****"
exit 0
fi
echo "***** Job will be continued as db says yes ******" >> $LOGFILEDBVALUE is coming as null and I am getting the error.
HOwever, If I execute the script alone as below it is returning the values. I don't think there is issue with credentials.
checkdbtoproceedjob ODS_LOAD FORWARDARTICLE
checkdbtoproceedejob
#! /bin/bash
. config
set -x
checkdbtoproceedjob()
CONTROLFLAG=`sqlplus -s $CONNSTRODS << EOF
whenever sqlerror exit sql.sqlcode
set TRIMSPOOL ON
set serveroutput on
set pagesize 0 feedback off verify off heading off echo off
declare
pv_control_flag varchar2(50);
pv_feed_name varchar2(100) := '$2';
pv_job_name varchar2(100) := '$1';
begin
SP_CHECK_PROCEED_JOB(pv_job_name,pv_feed_name,pv_control_flag);
dbms_output.put_line(pv_control_flag);
end;
exit;
EOF`
checkdbtoproceedjob $1 $2
echo $CONTROLFLAG
set +x
exit 0am i doing something wrong? Please let me know.
Regards
Nagaraja Akkiivalli.
Edited by: Nagaraja Akkivalli on Mar 28, 2012 1:50 PM -
TIME LIMIT EXCEEDED ERROR WHILE EXECUTING DTP
Hi gurus,
I Have got an error while executing
The errors are as follows.
1.Time limit exceeded. No return of the split processes
2.Background process BCTL_DK9MC0C2QM5GWRM68I1I99HZL terminated due to missing confirmation
3.Resource error. No batch process available. Process terminated
Note: Iam not executing the DTP as a back ground job.
As it is of higher priority the answers Asap Is appreciated.
Regards
Amar.Hi,
how is it possible to execute a DTP in dialog process. In my mind it is only possible for debugging...
In "Display Data Transfer Process" -> "Goto" -> "Settings for Batch Manger" you can edit settings like Number of Processes or Job Class.
Additional take a look at table RSBATCHPARALLEL and
http://help.sap.com/saphelp_nw04s/helpdata/en/42/f29aa933321a61e10000000a422035/frameset.htm
Regards
Andreas -
Hello,
I currently having a series of errors (18 issues) that are occurring under the below Correlation ID ad1a22f5-1ddb-4fa5-8487-143cb6fd0f9d
I have listed (3) that are in the Web Parts category, this error/issue is causing several timed job to no longer work properly I have been trying to find the root cause for about a week now. If anyone has encountered a issue
such as this one I'm open for suggestions.
(1)
Error while executing web part: System.Xml.Xsl.XslLoadException: XSLT compile error. An error occurred at (1,475). ---> System.Net.WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel.
---> System.Security.Authentication.AuthenticationException: The remote certificate is invalid according to the validation procedure. at System.Net.Security.SslState.StartSendAuthResetSignal(ProtocolToken message, AsyncProtocolRequest
asyncRequest, Exception exception) at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer,
AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer,
AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer,
AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.ForceAuthentication(Boolean receiveFirst, Byte[] buffer, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.ProcessAuthentication(LazyAsyncResult
lazyResult) at System.Threading.ExecutionContext.runTryCode(Object userData) at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Net.TlsStream.ProcessAuthentication(LazyAsyncResult result) at System.Net.TlsStream.Write(Byte[]
buffer, Int32 offset, Int32 size) at System.Net.PooledStream.Write(Byte[] buffer, Int32 offset, Int32 size) at System.Net.ConnectStream.WriteHeaders(Boolean async) --- End of inner exception
stack trace --- at System.Net.HttpWebRequest.GetResponse() at System.Xml.XmlDownloadManager.GetNonFileStream(Uri uri, ICredentials credentials) at System.Xml.XmlUrlResolver.GetEntity(Uri
absoluteUri, String role, Type ofObjectToReturn) at Microsoft.SharePoint.WebPartPages.WSSXmlUrlResolver.GetEntity(Uri absoluteUri, String role, Type ofObjectToReturn) at System.Xml.Xsl.Xslt.XsltLoader.CreateReader(Uri
uri, XmlResolver xmlResolver) at System.Xml.Xsl.Xslt.XsltLoader.LoadStylesheet(Uri uri, Boolean include) at System.Xml.Xsl.Xslt.XsltLoader.LoadStylesheet(XmlReader reader, Boolean include)
--- End of inner exception stack trace --- at System.Xml.Xsl.Xslt.XsltLoader.LoadStylesheet(XmlReader reader, Boolean include) at System.Xml.Xsl.Xslt.XsltLoader.Load(Compiler compiler, Object stylesheet, XmlResolver
xmlResolver) at System.Xml.Xsl.Xslt.Compiler.Compile(Object stylesheet, XmlResolver xmlResolver, QilExpression& qil) at System.Xml.Xsl.XslCompiledTransform.CompileXsltToQil(Object stylesheet, XsltSettings
settings, XmlResolver stylesheetResolver) at System.Xml.Xsl.XslCompiledTransform.LoadInternal(Object stylesheet, XsltSettings settings, XmlResolver stylesheetResolver) at System.Xml.Xsl.XslCompiledTransform.Load(XmlReader
stylesheet, XsltSettings settings, XmlResolver stylesheetResolver) at Microsoft.SharePoint.WebPartPages.DataFormWebPart.LoadXslCompiledTransform(WSSXmlUrlResolver someXmlResolver) at Microsoft.SharePoint.WebPartPages.DataFormWebPart.GetXslCompiledTransform()
at Microsoft.SharePoint.WebPartPages.DataFormWebPart.PrepareAndPerformTransform(Boolean bDeferExecuteTransform)
(2)
InnerException 1: System.Net.WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authentication.AuthenticationException: The remote certificate is invalid according
to the validation procedure. at System.Net.Security.SslState.StartSendAuthResetSignal(ProtocolToken message, AsyncProtocolRequest asyncRequest, Exception exception) at System.Net.Security.SslState.ProcessReceivedBlob(Byte[]
buffer, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.ProcessReceivedBlob(Byte[]
buffer, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.ProcessReceivedBlob(Byte[]
buffer, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.ForceAuthentication(Boolean
receiveFirst, Byte[] buffer, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.ProcessAuthentication(LazyAsyncResult lazyResult) at System.Threading.ExecutionContext.runTryCode(Object userData)
at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback,
Object state) at System.Net.TlsStream.ProcessAuthentication(LazyAsyncResult result) at System.Net.TlsStream.Write(Byte[] buffer, Int32 offset, Int32 size) at System.Net.PooledStream.Write(Byte[]
buffer, Int32 offset, Int32 size) at System.Net.ConnectStream.WriteHeaders(Boolean async) --- End of inner exception stack trace --- at System.Net.HttpWebRequest.GetResponse()
at System.Xml.XmlDownloadManager.GetNonFileStream(Uri uri, ICredentials credentials) at System.Xml.XmlUrlResolver.GetEntity(Uri absoluteUri, String role, Type ofObjectToReturn) at Microsoft.SharePoint.WebPartPages.WSSXmlUrlResolver.GetEntity(Uri
absoluteUri, String role, Type ofObjectToReturn) at System.Xml.Xsl.Xslt.XsltLoader.CreateReader(Uri uri, XmlResolver xmlResolver) at System.Xml.Xsl.Xslt.XsltLoader.LoadStylesheet(Uri uri, Boolean include)
at System.Xml.Xsl.Xslt.XsltLoader.LoadStylesheet(XmlReader reader, Boolean include)
(3)
InnerException 2: System.Security.Authentication.AuthenticationException: The remote certificate is invalid according to the validation procedure. at System.Net.Security.SslState.StartSendAuthResetSignal(ProtocolToken message, AsyncProtocolRequest
asyncRequest, Exception exception) at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer,
AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer,
AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer,
AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.ForceAuthentication(Boolean receiveFirst, Byte[] buffer, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.ProcessAuthentication(LazyAsyncResult
lazyResult) at System.Threading.ExecutionContext.runTryCode(Object userData) at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Net.TlsStream.ProcessAuthentication(LazyAsyncResult result) at System.Net.TlsStream.Write(Byte[]
buffer, Int32 offset, Int32 size) at System.Net.PooledStream.Write(Byte[] buffer, Int32 offset, Int32 size) at System.Net.ConnectStream.WriteHeaders(Boolean async)Hello,
It seems that issue is related to certificate. Could you please upload certificate to central admin and make it trust.
Just try this and see the result:
http://social.technet.microsoft.com/Forums/en-US/cbc58585-1673-4c91-b8c1-1b95c339bbb7/could-not-establish-trust-relationship-for-the-ssltls-secure-channel?forum=fastsharepoint
http://social.msdn.microsoft.com/Forums/en-US/7a7e56ba-6e95-4a84-9384-791818cce89d/the-underlying-connection-was-closed-could-not-establish-trust-relationship-for-the-ssltls-secure?forum=sharepointdevelopmentprevious
http://www.infotext.com/help/sharepoint-could-not-estabilish-trust-relationship-for-the-ssltls-secure-channel-when-crawling-ssl-enabled-websites/
If still face the issue then tell us more about your webparts and also confirm if you are facing same problem to other page and site.
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help -
Hi All ,
I got an error while executing a DTP. Short Dump analysis points this error. : DBIF_REPO_SQL_ERROR.
Please provide in your valuable inputs to resolve this error.
Thank & Regards,
Rohit GargThis error comes majorly when you have a deadlock in your code. Check ST22 if you have any short dump corresponding to it and see the source code where it is getting stuck.
If you find this dump explaining table space issue, then contact Basis, they will be able to help you with table space problem.
Edited by: Deepmala Agarwal on Aug 18, 2009 7:40 AM -
error while executing script for sharepoint online (office 365) - the remote server returned an error: (503) server unavailable.
I am creating many site collections reading records from sharepoint list using powershell in sharepoint online tenant (office 365).
Few site collections are created and then getting above error so this error record will be skipped then few succeeding record processed then again getting error.
pattern is like:
success
success
success
success
Error
success
success
success
success
success
success
error
successHi,
As it is an online environment, to troubleshoot this issue in an easier way, I suggest you contact Office 365 Support to see if there is any useful information in
the log files in the server side:
https://support.office.com/en-us/article/Contact-Office-365-for-business-support-32a17ca7-6fa0-4870-8a8d-e25ba4ccfd4b?ui=en-US&rs=en-US&ad=US
Best regards
Patrick Liang
TechNet Community Support -
Error while executing the script adgetlnxver.sh
Error while executing the script adgetlnxver.sh on apps&db tier during upgrade from 11.5.9 to 11.5.10.2
-bash: [: -lt: unary operator expected
[aptinst@dba5 TINST_dba5]$ sh adapcctl.sh restart
adapcctl.sh version 115.55
/u01/app/tinst/tinstappl/ad/11.5.0/bin/adgetlnxver.sh: line 123: [: -lt: unary operator expected
Apache Web Server Listener :httpd ( pid 8645 ) is running.
Restarting the Apache Web Server Dedicated HTTP Listener..
Apache Web Server Listener (PLSQL) :httpd ( pid 8673 ) is running.
Restarting the Apache Web Server Dedicated PLSQL Listener..
adapcctl.sh: exiting with status 0
In adgetlnxver.sh: line 123 says
if [ ${setflag}x = "x" -a $os = "RH" ]; then
redhatver=`grep -oP "Enterprise Linux [a-z A-Z 0-9]* release [0-9]+" /etc/redhat-release | sed 's/Enterprise Linux [a-z A-Z 0-9]* release //g'`
if [ $redhatver -lt 5 ]; then
LD_ASSUME_KERNEL="2.4.19"
export LD_ASSUME_KERNEL
fi
fi
Thanks,
VamsiHi Vamsi.
The exactly erro refers to a problems when you try upgrade from these version to 11.5.10.
Can you read this note and apply solution? The note refers a patch, but the problem is the same.
After Patch 4334965, adstrtal.sh & adstpall.sh is failing with errors [ID 360046.1]
BR Rafael Ceolim -
Js-error while executing Multiple Image Upload wizard
If i want to save the configured window of Multiple Image Upload with Save to Database wizard i get this js-error: "While executing onClick in MIUploadWSaveWizard.htm, a JavaScript error occured".
can someone help?
thanx
peterThat again would be more of a question for the Cold Fusion group.
Try http://forums.adobe.com/community/coldfusion/coldfusion_administration
Those people will be able to help you out more.
Brad Lawryk
Adobe Community Expert, Dreamweaver
Adobe Usergroup Manager, Northern British Columbia Adobe User Group -
I am getting a error while executing the Web Dynpro Application Page.
Hi All,
I am getting a Error while executing a web dynpro application :::
: Navigation in Phase WDDOMODIFYVIEW Cannot Be Triggered. Component: Z_WEP_PERSONAL_DATA, View: OVERVIEW, Window: Z_XXP_PERSONAL_DATA
I have checked this error description in ST22 :
What happened?
The exception 'CX_WDR_RT_EXCEPTION' was raised, but it was not caught anywhere
along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program
'CL_WDR_CLIENT_APPLICATION=====CP' has to be
terminated.
Error analysis
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_WDR_RT_EXCEPTION', was not caught
and
therefore caused a runtime error.
The reason for the exception is:
Navigation in Phase WDDOMODIFYVIEW Cannot Be Triggered. Component:
Z_XXP_PERSONAL_DATA, View: OVERVIEW, Window: Z_XXP_PERSONAL_DATA
Can u plz help me regarding this error.
Thanks,
Deepika>Navigation in Phase WDDOMODIFYVIEW Cannot Be Triggered
Looks to me like you are trying to fire a navigation plug within WDDOMODIFYVIEW. According to the rules of the WD Phase Model this is not allowed. -
Runtime error while executing rule
Hello All,
While executing the DTP for a cube, im facing the error as Runtime error while executing rule -> see long text .
For this source is another Cube, where im loading the data from Cube to Cube.
Error Description are as follows:-
Error Location: Object Type TRFN
Error Location: Object Name 0T9SCR6Q4VWS1SOPNRRBOY1YD51XJ7PX
Error Location: Operation Type ROUTINE
Error Location: Operation Name
Error Location: Operation ID 00034 0000
Error Severity 100
Original Record: Segment 0001
Original Record: Number 557
and Also descripton is :-
Diagnosis
An error occurred while executing a transformation rule:
The exact error message is:
Division by zero
The error was triggered at the following point in the program
GP4H0CW3MLPOTR3E8Y93QZT2YHA 4476
System Response
Processing the data record has been terminated.
Procedure
The following additional information is included in the higher-level
node of the monitor:
Transformation ID
Data record number of the source record
Number and name of the rule which produced the error
Let me know ur valuable suggestions on these error...
thanks.Hello,
I have checked all the transformation and End Routines.All are working fine.Yesterday i have loaded some data into it, but today its gettting errored out.
Checked completely in the forum for threads related to this, but couldnt find proper thread which had solutions....
thanks,
srinivas.
Maybe you are looking for
-
10.5.8 won't show UPS battery level
I just installed an APC Smart UPS 1000 VA UPS to my Mac Pro server. The USB cable is plugged in and the UPS battery is fully charged according to the display on the UPS itself. The Energy Saver control panel is the APC preferred control method (the
-
Hi there! I am working on SRM 7.0 Extended Classic Scenario. I have a Purchase Order that failed to transmit from SRM to ECC. Status is "Transfer Failed (E.Sys.)" I got the Backend Error messages in SLG1 and fixed them in ECC. Error in RZ20: Purchase
-
Layer locking management and CMS type of integration
I'm evaluating a minimal check-in/check-out feature that would be layer based. The project i'm working on involve multiple documents, multiple layers and "composition" documents that are using layers from the master documents to create new master doc
-
Regarding screen guard issue for xperia z3
When is the screen guard of xperia z3 coming to india. Iam from visakhapatnam, Andhra Pradesh
-
Sharing files for different users on same computer without duplicating
Newbie here, I got my 1st mac (in ten years) last week and have been really enjoying it. I set up 3 user's accounts and wanted to share files such as iphoto and itune for all users. So I put my pictures in the shared folder, however, when I opened ip