Error while expanding tables in SQL Developer

Hi All,
I am using Oracle 11g, SQL Developer Version 3.1.07,
I have saved a connection for testing, for the default account (scott/tiger).
Connection Test is successful, but when I tried to expand the tables folder, it is showing an error.
Error:
java.lang.NoSuchMethodError: oracle.jdbc.OraclePreparedStatement.setStringAtName(Ljava/lang/String;Ljava/lang/String;)V
     at oracle.dbtools.db.DBUtil$15.call(DBUtil.java:959)
     at oracle.dbtools.db.DBUtil$15.call(DBUtil.java:945)
     at oracle.dbtools.db.DBUtil.assertLock(DBUtil.java:1723)
     at oracle.dbtools.db.DBUtil.bind(DBUtil.java:945)
     at oracle.dbtools.db.DBUtil.bind(DBUtil.java:1404)
     at oracle.dbtools.raptor.controls.grid.OracleRSTModel.prepareStatement(OracleRSTModel.java:89)
     at oracle.dbtools.raptor.controls.grid.ResultSetTableModel.openResultSet(ResultSetTableModel.java:458)
     at oracle.dbtools.raptor.controls.grid.ResultSetTableModel.fetchNext(ResultSetTableModel.java:183)
     at oracle.dbtools.raptor.controls.grid.ResultSetTableModel$4.doWork(ResultSetTableModel.java:636)
     at oracle.dbtools.raptor.controls.grid.ResultSetTableModel$4.doWork(ResultSetTableModel.java:620)
     at oracle.dbtools.raptor.backgroundTask.RaptorTask.call(RaptorTask.java:193)
     at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
     at java.util.concurrent.FutureTask.run(FutureTask.java:138)
     at oracle.dbtools.raptor.backgroundTask.RaptorTaskManager$RaptorFutureTask.run(RaptorTaskManager.java:515)
     at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
     at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
     at java.util.concurrent.FutureTask.run(FutureTask.java:138)
     at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
     at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
     at java.lang.Thread.run(Thread.java:662)
Note:
1. I have tried the query "SELECT * FORM TAB", it fetch all the tables name from the database.
2. I have the following privilege
PRIVILEGE
CREATE SESSION
UNLIMITED TABLESPACE
CREATE TABLE
CREATE CLUSTER
CREATE SEQUENCE
CREATE PROCEDURE
CREATE TRIGGER
CREATE TYPE
CREATE OPERATOR
CREATE INDEXTYPE
Please suggest me some idea how to solve this issue.

Hi Kamal,
Some of the comments in this earlier post may be of help:
Can't view database objects
Bottom line: the missing method is found in jdbc jars like ojdbc5.jar and ojdbc6.jar, but not in earlier versions. Not sure of exact names, but probably something that came with an Oracle 8i client (maybe ojdbc14.jar?) or even a (much older) jar like classes12.jar would not have that method.
If you would rather not clean up this probable ORACLE_HOME conflict, you can try a common workaround noted again today in the forum to force use of the ojdbc6.jar that ships with SQL Developer:
Re: Migrate from sql developer 1.5x to 3.x
Regards,
Gary
SQL Developer Team

Similar Messages

  • Error while executing query in SQL Developer

    I am getting the following error whenever I login to sql developer.
    SEVERE 56 0 oracle.jdbc Error while registering Oracle JDBC Diagnosability MBean.
    I get below error whenever I execute any query.
    SEVERE 70 53918 oracle.dbtools.worksheet.sqlhistory.SqlHistoryTask oracle.dbtools.worksheet.sqlhistory.db.HistoryDB.readHistory(HistoryDB.java:99)
    I use following versions
    Java(TM) Platform 1.6.0_35
    Oracle IDE 3.2.20.09.87
    Versioning Support 3.2.20.09.87
    I am working on Oracle11gR2.
    Please help me to resolve this and let me know if you need more information.

    Got same issue with :
    Component
    Version
    =========
    =======
    Java(TM) Platform
    1.6.0_41
    Oracle IDE
    3.2.20.09.87
    Versioning Support
    3.2.20.09.87
    Alternate path for SqlHistory directory :
    C:\Users\USER_NAME\AppData\Roaming\SQL Developer
    Best Regards,
    F.L.

  • ORA-01041 Error while query in PL/SQl Developer

    Hi All,
    I am trying to execute a simple select statement in PL/SQL developer. After the query gets executed i am getting a error
    ORA-01041 internal error. hostdef extension doesn`t exist.
    But when i perform the same query in sqlplus, i do not receive this kinda error.
    Does any 1 have a idea on this error?
    Regards,
    Ritesh Khuller

    PL/SQL Developer is a third-party tool and not from oracle.
    maybe you have better chances in the rdbms-forum where they know more about hostdef's
    PL/SQL
    General Database Discussions

  • Error while connecting database from SQL developer

    Hello experts,
    i have installed oracle 11g R2 database on WIN32 platform, and my database is working in sql plus but while connecting the same via sql developer am getting the following error:
    NO more data to read from socket
    Vendor code 17410
    Kindly suggest.
    Regards,
    KK

    I have restarted the listener service but still getting the same in sql dev
    LSNRCTL> status
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for 32-bit Windows: Version 11.2.0.1.0 - Produ
    ction
    Start Date 05-JAN-2013 21:56:29
    Uptime 0 days 0 hr. 2 min. 44 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File d:\app\Karan\product\11.2.0\dbhome_1\network\admin\lis
    tener.ora
    Listener Log File d:\app\karan\diag\tnslsnr\Karan-PC\listener\alert\log.
    xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
    Services Summary...
    Service "OIMDB" has 1 instance(s).
    Instance "OIMDB", status UNKNOWN, has 1 handler(s) for this service...
    The command completed successfully
    LSNRCTL> stop
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
    The command completed successfully
    LSNRCTL> start
    Starting tnslsnr: please wait...
    TNSLSNR for 32-bit Windows: Version 11.2.0.1.0 - Production
    System parameter file is d:\app\Karan\product\11.2.0\dbhome_1\network\admin\list
    ener.ora
    Log messages written to d:\app\karan\diag\tnslsnr\Karan-PC\listener\alert\log.xm
    l
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521
    ipc)))
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for 32-bit Windows: Version 11.2.0.1.0 - Produ
    ction
    Start Date 05-JAN-2013 21:59:45
    Uptime 0 days 0 hr. 0 min. 6 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File d:\app\Karan\product\11.2.0\dbhome_1\network\admin\lis
    tener.ora
    Listener Log File d:\app\karan\diag\tnslsnr\Karan-PC\listener\alert\log.
    xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
    Services Summary...
    Service "OIMDB" has 1 instance(s).
    Instance "OIMDB", status UNKNOWN, has 1 handler(s) for this service...
    The command completed successfully
    LSNRCTL>
    Edited by: 958122 on Jan 5, 2013 9:59 PM

  • OCI.dll error while conneting via Pl/Sql developer

    Hi All,
    I have installed Oracle 9.2.0.6 on my test server. The installations was sueecssful & SQL Plus is working fine.
    Now i have installed PL/Sql developer but when i going to connect thru it its givng me the following error message.
    Initialization Error Could Not locate OCI dll
    OracleHomeKey: SOFTWARE\ORACLE\HOME1
    OracleHomeDir: D:\orant
    I have also check the oci.dll file & it is located in D:\Orant\Bin
    Pleace adivce....
    Thanks in advance.

    Hi All,
    I have installed Oracle 9.2.0.6 on my test server. The installations was sueecssful & SQL Plus is working fine.
    Now i have installed PL/Sql developer but when i going to connect thru it its givng me the following error message.
    Initialization Error Could Not locate OCI dll
    OracleHomeKey: SOFTWARE\ORACLE\HOME1
    OracleHomeDir: D:\orant
    I have also check the oci.dll file & it is located in D:\Orant\Bin
    Pleace adivce....
    Thanks in advance.

  • Getting error while expanding SQL Server 2012 agent.

    Hi All,
    Server Version Details: Microsoft SQL Server 2012 (SP1) - 11.0.3000.0 (X64)
        Oct 19 2012 13:38:57
        Copyright (c) Microsoft Corporation
        Standard Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1)
    We are using SQL Server 2012 in Active/Passive Cluster and the problem is getting below error while expanding SQL Agent. Please share you views on this. Thank You.
    TITLE: Microsoft SQL Server Management Studio
    Failed to retrieve data for this request. (Microsoft.SqlServer.Management.Sdk.Sfc)
    For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&LinkId=20476
    ADDITIONAL INFORMATION:
    An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
    A severe error occurred on the current command.  The results, if any, should be discarded. (Microsoft SQL Server, Error: 0)
    For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&ProdVer=11.00.3000&EvtSrc=MSSQLServer&EvtID=0&LinkId=20476
    BUTTONS:
    OK
    Regards,
    Kalyan
    ----Learners Curiosity Never Ends----

    Hi OHM SAI RAM,
    I’m writing to follow up with you on this post. Was the problem resolved after checking the error message and performing the action plan steps? I’d like to mark this issue as "Answered". Please also feel free to unmark the issue, with any new findings or
    concerns you may have.
    Thanks,
    Sofiya Li
    Sofiya Li
    TechNet Community Support

  • Source sys Restore "error while creating table EDISEGMENT "

    Dear All,
    I am Basis person and recently we have refreshed data of Test BI system from Development BI system. we normally carry out these Refresh but In this case we have also changed Hostname and SID for Test BI system.
    We have done all BW refresh steps as per guide and during Restore of source system we
    are getting errors during datasource activation as  " error while creating table EDISEGMENT ".
    we have checked RFC and Partner profiles and working fine.
    We have 2 clients connected from source system to our Test BI box.strange thing is we got one source system activated without any errors and for second
    source system we are getting above mentioned error.
    We have reviewed notes 339957 , 493422 but our BI fuctional team is not sure whether
    those apply to our OLTP system , as one source system from same OLTP system got
    successfully activated and source system for other client giving this issue .
    Please help us out with this problem.
    we are running on BI 7.0 platform and ECC 6.0 for source.
    Regards,
    Rr

    check the relevant profiles in We20 t code and also in sm59 if the remote connection with autorisation is sucssessfull, connection is ok otherwise you need to check th paramters.
    hope this helps
    regards
    santosh

  • Error while creating table "EDISEGMENT' entry 'BIC/CIBA0PLANT_ATTR

    While loading master data for 0PLANT, its giving me following error.
    "error while creating table "EDISEGMENT' entry 'BIC/CIBA0PLANT_ATTR"
    Please help me out.
    Thanks

    steve,
    Can you give the solution you used to correct this problem?
    This error occurred in BW during import.
    Raj.

  • Error while creating table maintenance generator

    Hi,
    I am getting below error while creating table maintenance generator.
    Screen SAPLZtest   0002 could not be generated.   In DYNPFIELD_ATTR field LENGTH has the invalid value 241.
    Reason for that error might be:
    In the table I have a field with a dataelement(customized) of type Char and length 241.
    But in the other table Iam using the standard data element(standard) of same type(241 char).In this table Iam able to create table maintenance generator without any errors.
    And the domain Iam using is same for both the tables.
    Please help me to solve this.
    Thanks in advance,
    Sravanthi

    Hi,
    you can go to transaction se51 and go your screen. active it.. you can find thesolution.
    refer these links..
    Error in table control
    Error while creating table maintainence generator !
    Thanks and Regards,
    Ahamed.

  • Erro: "Error while creating table 'EDISEGMENT'"

    Pessoal bom dia,
    quando eu vou Ativar uma Regra de Transferência retona o seguinte erro:
    Error while creating table 'EDISEGMENT'
    não estou conseguindo desvendar o que pode ser isto, e a regra não ativa de jeito nenhum.
    Alguém já passou pelo problema?

    Please post this in the Portuguese Forum...
    Regards
    Juan

  • Error: "Error while creating table 'EDISEGMENT'"

    Hi,
    When I activate a Transfer Rule return the following error:
    Error while creating table 'EDISEGMENT'
    Someone has passed the problem?

    Bom dia Marques,
    Na SAP Note 339957 tem o síntoma descrito por você.
    Solução:
    In the system where the error occurs (usually the OLTP), create and run the report RS_CHECK_TS_EDISEGMENT (with SENDING and RECEIVING LOGSYS as an entry).
    Entretanto esta nota foi substituida pela SAP Note 493422, com bem mais detalhes e indica um programa Z
    Atenciosamente,
    Fernando Da Rós
    PS: Fórum em português.

  • Error while creating table 'EDISEGMENT' entry for Transfer Structures

    Hi Guyz...
    I've been facing a few issues regarding activation of transfer structures.
    I'll explain the whole process...so it makes sense to you guys.
    I've initially activated the Transfer Structures in BI Content for Master Data. Later on we faced some issues in the DEV server. So we had to transport all the objects and store them locally on a temporary location. When the BI DEV sever, was up and running, we transported all the objects back to the server.
    Now while moving the objects back to the sever. We had an errors in the Master Data Request (Log- Method Execution). After going into the log...this is what I found.
    Error while creating table 'EDISEGMENT' entry '/BIC/CIIA0DIVISION_TEXT'
    Error while creating table 'EDISEGMENT' entry '/BIC/CIIA0DISTR_CHAN_TEXT'
    Error while creating table 'EDISEGMENT' entry '/BIC/CIIA0MATL_TYPE_TEXT'
    Error while creating table 'EDISEGMENT' entry '/BIC/CIIA0SALESORG_TEXT'
    Error while creating table 'EDISEGMENT' entry '/BIC/CIIA0SALES_GRP_TEXT'
    I hope, I am clear here.
    Any suggestions, guys...
    Thanks,
    Regards,
    G

    Hi,
    Please check this link:
    Error while creating table EDISEGMENT entry
    Hope it helps.
    Thanks and Regards,
    MuraliManohar.

  • Error while creating table 'EDISEGMENT' entry '/BIC/CIBD0BILBLK_DL_TEXT'

    Hi All,
    I am getting a error"Error while creating table 'EDISEGMENT' entry", when running the program RS_Transtru ActivateAll to activate the transfer rules as we had reconnected our source system,
    we are on 2004s server and on SP level 17, I understand that this issue is created as the transfer rules are using IDOC as transfer method, and I Cannot manually change the transfer method to PSA and activate  as the number of transfer rules with this  issue are huge in number.
    Please suggest the suitable solution
    Thank you in advance
    krishna
    Edited by: krishna dvs on Feb 17, 2009 1:24 PM

    Hi,
    Please check the note 493422. The reports listed in the note
    should correct the inconsistencies and afterwards you can re-import the
    request and it should then work.
    Regards,
    Srikanth

  • Error while creating table 'EDISEGMENT' entry '/BIC/CIWA0TRZONE_TEXT'

    Hi experts,
    when I import my transport request to QA, I am getting this error
    "Error while creating table 'EDISEGMENT' entry '/BIC/CIWA0TRZONE_TEXT'"
    the performance assistance reads as below..
    Message no. EA201
    Diagnosis
    An attempt was made to create the entry '/BIC/CIWA0TRZONE_TEXT' in table 'EDISEGMENT'. The attempt failed.
    System response
    The operation was canceled.
    Procedure
    Please check whether the relevant entry already exists
    I have an entry for '/BIC/CIWA0TRZONE_TEXT'  in the table 'EDISEGMENT' do need to delete it before importing the transport. How to delete this entry, I donot see the options in SE11 /SE16..
    thanks in advance
    D Bret

    Hi,
    can you please be more precise with your enquiry?
    As far as I read the note, it is quite explanatory....
    What is your source system release?
    You'll need to implement this prog in your source system and execute it there.
    If everything works and is fine, import to program in your QA/PROD source systems and rexecute it as specified in the note...
    does it answer your question
    Olivier.

  • Error while creating table 'EDISEGMENT' entry '/BIC/CIBB0DISTR_CHAN_TEXT'

    When I am activating the transfer rules of 0divison_text giving me the error
    Error while creating table 'EDISEGMENT' entry '/BIC/CIBB0DISTR_CHAN_TEXT'
    Message no. EA201
    Diagnosis
    An attempt was made to create the entry '/BIC/CIBB0DISTR_CHAN_TEXT' in table 'EDISEGMENT'. The attempt failed.
    System Response
    The operation was canceled.
    Procedure
    Please check whether the relevant entry already exists.
    I have checked the note 493422 but I did not understand it can any one help me in this
    I am  working on 7.o with  SP SAPKW70010

    Hi Priya,
    Delete entries for the data source in ROOSGEN,  EDISEGMENT and EDSAPPL tables, both on ECC and BI sides.
    Try activating the infosource again.  This should solve your problem.
    Sasi

Maybe you are looking for