Error while Extracting data using RSCRM_BAPI

Friends
We are on 3.5 system upgraded recently. I am getting the following Error message while trying to extract data from a query to a table using the transaction RSCRM_BAPI. The Error message says ' Internal Error in Method CHECK_TABLE_NAME(RSCRMBW_EX_NAMESPACE_GET).
This was working fine prior to upgrade. I scoured all the OSS notes, could not find an appropriate one to solve the issue.
Have you had this problem and any thoughts on resolution ? Appreciate your inputs very much.
Regards
Mathur Sreedhar

Hi Mathur,
did you ever resolved this Issue? if so can yoou share with me the solution. i am having the same problem, we are in 3.0 . it works fine in Development and Test. but when i try it in Production . i get this error.
'Internal error in method CHECK_TABLE_NAME (RSCRMBW_EX_NAMESPACE_GET)..
if you know the answer. would please share with me.
your help would be greatly appreciated.
Thanks.
Sreeni.

Similar Messages

Error while downloading data Using RSCRM_BAPI

Hi Folks,
I am getting the below mentioned error message while downloading the data from BW report to csv file using RSCRM_BAPI.
Can anyone help on this error ?
Internal error in method CHECK_TABLE_NAME (RSCRMBW_EX_NAMESPACE_GET)

hi lakshmi:
I also tried to use this t-code. but this has lots of restrictions..and its not recommended to use this t-code for complex queries.There are OSS NOtes out there for restrictions for this t-code.
I got to know from other forums on SDN that there is other RSCRMBW_REPORT FM. which is better to use. but not able to use it... there is specific way for that FM. If you try that and if it works for you please let me also know.
Also, try to look at this forums:
Error Using RSCRM_BAPI T-Code
Problem with RSCRM_BAPI (extraction to Fixed Lenght txt file)
RSCRM_BAPI Schedule and monitor
RSCRM_BAPI
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3ba5e590-0201-0010-59b1-cab51fd245b7
Hope this helps.
KSmith

Error while extracting data using function module

Hello,
I created one generic datasource and i want to extract data with the option "Extraction by Function Module".
But when i specified function module name and was trying to save, it thrown a error message saying
'The specified table does not exist'.
What could be the reason?
Please help me out.
Thanks,
Regards,
Steve

Hi Steve,
Once you execute T.Code RSO2, you need to fill in the details and click Create, specify the Appl. Component and in Extraction by Function Module, give Function Module name and Extrct Structure in the given boxes.
"This structure is used by a DataSource that was created using the transaction RSO2 (generic extraction) and selects data using a function module.
The data must be transferred from this function module to an interface table E_T_DATA."
I'll try to comeup with small piece of code to sort your issue.
Hope it helps!!!!
Amit

Error while extracting data from data source 0RT_PA_TRAN_CONTROL, in RSA7

Hi Gurs,
I'm getting the below error while extracting data from data source 0RT_PA_TRAN_CONTROL, in RSA7. (Actullly this is IS Retail datasource used to push POSDM data into BI cubes)
The error is:
Update mode "Full Upload" is not supported by the extraction API
Message no. R3011
Diagnosis
The application program for the extraction of the data was called using update mode "Full Upload". However, this is not supported by the InfoSource.
System Response
The data extraction is terminated.
Procedure
Check for relevant OSS Notes, or send a problem message of your own.
Your help in this regd. would be highly appreciated.
Thanks,
David.

Hi David,
I have no experience with IS Retail data sources. But as message clearly say this DS is not suppose to be ran in Full mode.
Try to switch you DTPs/Infopackages to Delta mode.
While to checking extraction in source system, within TA RSA3 = Extractor checker, kindly switch Update mode field to Delta.
BR
m./

Time Stamp Error while extracting data from R/3

Hi,
We are getting time stamp error while extracting data from R/3.
To solve this problem we did replication and run RS_TRANSTRU_ACTIVATE_ALL program. still we are facing same problem.
Please suggest me to solve.
Thanks
Subba Rao

Hi,
Time stamp error arises when the time stamp of the data source in source system and target system are different.
For we have again activate data source in R/3 system using transaction RSA5 or RSA6 and in BI system goto transaction RSDS and replicate the data source.
You can also find time stamp details for a data source in tables ROOSGEN and ROOSOURCE tables in BI and R/3 system respectively.
Here are some useful links.
[R3 016 Time stamp error where is it in BI?;
[time stamp error in bi7;
[Timestamp error in BI7;
Thanks,
Venu

Error while insert data using execute immediate in dynamic table in oracle

Error while insert data using execute immediate in dynamic table created in oracle 11g .
first the dynamic nested table (op_sample) was created using the executed immediate...
object is
CREATE OR REPLACE TYPE ASI.sub_mark AS OBJECT (
mark1 number,
mark2 number
t_sub_mark is a class of type sub_mark
CREATE OR REPLACE TYPE ASI.t_sub_mark is table of sub_mark;
create table sam1(id number,name varchar2(30));
nested table is created below:
begin
EXECUTE IMMEDIATE ' create table '||op_sample||'
(id number,name varchar2(30),subject_obj t_sub_mark) nested table subject_obj store as nest_tab return as value';
end;
now data from sam1 table and object (subject_obj) are inserted into the dynamic table
declare
subject_obj t_sub_mark;
begin
subject_obj:= t_sub_mark();
EXECUTE IMMEDIATE 'insert into op_sample (select id,name,subject_obj from sam1) ';
end;
and got the below error:
ORA-00904: "SUBJECT_OBJ": invalid identifier
ORA-06512: at line 7
then when we tried to insert the data into the dynam_table with the subject_marks object as null,we received the following error..
execute immediate 'insert into '||dynam_table ||'
(SELECT

887684 wrote:
ORA-00904: "SUBJECT_OBJ": invalid identifier
ORA-06512: at line 7The problem is that your variable subject_obj is not in scope inside the dynamic SQL you are building. The SQL engine does not know your PL/SQL variable, so it tries to find a column named SUBJECT_OBJ in your SAM1 table.
If you need to use dynamic SQL for this, then you must bind the variable. Something like this:
EXECUTE IMMEDIATE 'insert into op_sample (select id,name,:bind_subject_obj from sam1) ' USING subject_obj;Alternatively you might figure out to use static SQL rather than dynamic SQL (if possible for your project.) In static SQL the PL/SQL engine binds the variables for you automatically.

Error While extracting data from FIAA and FIAP

Hi Gurus,
I am facing error while extracting data from R/3 Source. 0FIAA, 0FIAP datasources. I am getting the same error repeatedly. No data will come BW. When I checked in RSA3 I can extract records.
Ther Error is as follows:
Request still running
Diagnosis
No errors could be found. The current process has probably not finished yet.
System response
The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
Current status
No Idocs arrived from the source system.
Kindly help. Your points are assured.
Thanks and Regards
Prasad

Hello Prasad,
Have you already checked what happened in the source system ?
You should verify if a job is running in sm37, or if there is no dump runtime errors due to the extraction in st22.
It could be a clue of what happened in R/3.
Let us know,
Regards,
Mickael

Error while extracting data from Generic datasource

Hello Gurus,
I have encountered an error "Errors in source system" with status red while extracting data from generic datasource into DSO.
I have done below things:-
1. Checked the jobs in source system, the job is successfully completed
2. The generic datasource is active and supporting delta with calender day in source system.
3. No TRfc error and no idocs stucked.
4. No short dumps in source system.
5. The delta queue(RSA7) is showing 0 with status as green.
6. Replicated the datasource On BW side and also activated the transfer rules by RS_TRANSU_ACTIVATE_ALL
The problem has not yet solved. Could you guys please suggest me what might be the reason for this error......
Thanks,
Sonu

Hello,
I have used the generic delta using calender day.
Safety upper limit : - 1
Safety lowerr limit : - 0
I have made the entries in va01 transaction, but the delta queus is not getting updated which should show 1.
Do Generic extraction require any job to transfer data from Database table to delta queue.
We are not able to get the delta records on BW side. Please suggest.
Please suggest.
Thanks,
Sonu

Runtime Error while extracting data by datasource based on function module

Hi all,
I am facing an issue while extracting data from a customised data source based on a new function module.
The datasource is extracting data successfully for only 15000 records but after that the runtime error is displayed.
I am not able to extract whole data from R/3 system.
Please take a look into the details and tell me what should I have to do.
Details of Issue:
Runtime Error : GETWA_NOT_ASSIGNED
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLZ_99Z_BW_SD_PRICING"had to be terminated because it has come across a statement that unfortunately cannot be executed.
Error analysis
You attempted to access an unassigned field symbol
    (data segment 32790).
This error may occur if
    - You address a typed field symbol before it has been set with
      ASSIGN
- You address a field symbol that pointed to the line of an
      internal table that was deleted
    - You address a field symbol that was previously reset using
      UNASSIGN or that pointed to a local field that no
      longer exists
- You address a global function interface, although the
respective function module is not active - that is, is
      not in the list of active calls. The list of active calls
      can be taken from this short dump.
Edited by: anshu13 on Apr 27, 2010 10:28 AM

The code is displayed here:
error is in line no. 625
Source Code Extract
Line SourceCde
595            <fs_fldval> = l_fieldval.
596            APPEND <fs_dyntable> TO <it_dyntable>.
597            CLEAR :l_fieldval, wa_fldcat.
598            CLEAR l_totlength.
599            CLEAR <fs_dyntable>.
600         ENDIF.
601        ENDIF.
602        MOVE-CORRESPONDING <dd03l_fields> TO wa_dd03l.
603        IF <dd03l_fields>-datatype EQ 'DATS'.
604          l_fieldval = 'X'.
605       ELSE.
606        SHIFT <dd03l_fields>-intlen LEFT DELETING LEADING '0'.
607          IF l_totlength IS INITIAL.
608            SHIFT l_totlength LEFT DELETING LEADING '0'.
609            l_totlength = '0'.
610          ENDIF.
611          l_currlength = <dd03l_fields>-intlen.
612          CONCATENATE l_totlength '(' l_currlength ') ' INTO l_fieldval .
613          l_totlength = l_totlength + l_currlength.
614        ENDIF.
615*** Consider both field name and domian name for checking in range list:
616        IF <dd03l_fields>-fieldname IN s_fieldlist.
617          wa_fldcat-fieldname = <dd03l_fields>-fieldname.
618        ELSEIF <dd03l_fields>-domname IN s_fieldlist.
619          wa_fldcat-fieldname = <dd03l_fields>-domname.
620        ELSE.
621          wa_fldcat-fieldname = <dd03l_fields>-fieldname.
622        ENDIF.
623        ASSIGN COMPONENT wa_fldcat-fieldname
624             OF STRUCTURE <fs_dyntable> TO <fs_fldval>.
>>>>|        <fsfldval> = l_fieldval._
626        CLEAR l_fieldval.
627        CLEAR l_currlength.
628      ELSE.
629        IF <dd03l_fields>-datatype EQ 'DATS'.
630          l_fieldval = 'X'.
631       ELSE.
632          SHIFT <dd03l_fields>-intlen LEFT DELETING LEADING '0'.
633          IF l_totlength IS INITIAL.
634            SHIFT l_totlength LEFT DELETING LEADING '0'.
635           l_totlength = '0'.
636          ENDIF.
637          l_currlength = <dd03l_fields>-intlen.
638          CONCATENATE l_totlength '(' l_currlength ') ' INTO l_fieldval .
639         l_totlength = l_totlength + l_currlength.
640        ENDIF.
641*** Consider both field name and domian name for checking in range list:
642        IF <dd03l_fields>-fieldname IN s_fieldlist.
643        wa_fldcat-fieldname = <dd03l_fields>-fieldname.
644       ELSEIF <dd03l_fields>-domname IN s_fieldlist.
Edited by: anshu13 on Apr 27, 2010 11:33 AM

Error while extracting data from a remote system

Hi,
I am facing problem while extracting data from a remote system. The connection is alright I can extract the table required from the remote system,but when I deploy it I get this error
ORA-04052: error occurred when looking up remote object [email protected]@ORACLE_UBN_15_LOCATION1
ORA-00604: error occurred at recursive SQL level 1
ORA-28000: the account is locked
ORA-02063: preceding line from UBNDW@ORACLE_UBN_15_LOCATION1
here Scott.demo1 is the table and UBNDW is the sid of the remote system and ORACLE_UBN_15_LOCATION1 is the location. Please help me out with this
Thanks

Hi,
IDOC's need to be processed manually either in OLTp or in BW depending on the failure. Error msg in monitor status will take u to either BW or OLTP whernever there is a prob. Process IDOC's , this will start the left over packets and will finish the load.
we hav to check IDOC in WE05(t-code) and know the status these are WE51,WE52,WE53 AND GOTO WE19 there we hav to execute the exist Idoc will succesfully loaded Idoc
Goto St22 see the short dump error msg..
post if there any inf..
Thanks,
Shreya

Change of sign while extracting data using Open hub

Hello All,
We are extracting data from Info cube to a file in the application server using Open hub.
While extracting data, if there is any negative value for the key figure, negative sign is appending on the right side of the value(Eg: "123.67-"), which is the standard behaviour but I want the sign to be on the left side of the value (Eg: "-123.67") while extracting to the file at application server.
Could any one please let me know if there is any setting to do this change ?
Thanks in advance

Hi,
Changing the SIGN position from one side of the NUMBER to the other side can happen in following ways.
1) After the file is place in the application server. Deploy a OS SCRIPT file (for .csv) for obtaining the required changes to the required COLUMN [Basis team will have more idea on this]
2)This is time consuming idea. well deploy a routine at the Open hub -Infospoke level.
Regards

Error While Extracting data

Hi All.
The below is the error, which I am getting while extracting data.
Please let me know the reason, and how to overcome the below error.
Status Log
Warning ORA-02049: timeout: distributed transaction waiting for lock
Error ORA-01555: snapshot too old: rollback segment number 19 with name "_SYSSMU19$" too small
ORA-02063: preceding line from RPMSP@RPMSP_LOCATION
ORA-06512: at "SAI_USER.SA_PROD_SUMM_DYF_MAP", line 11
ORA-06512: at "SAI_USER.SA_PROD_SUMM_DYF_MAP", line 1622
ORA-06512: at "SAI_USER.SA_PROD_SUMM_DYF_MAP", line 2228
ORA-06512: at "SAI_USER.SA_PROD_SUMM_DYF_MAP", line 6253
ORA-06512: at line 1
Regards,

Hi,
Even though you have deleted the data from Datatarget, but you have not yet deleted the delta initialization inforamtion at infopackage, before re starting the delta process. So delete the information from BW system , by double click infopackage--> Schedular(menu option) --> 'Initialization option for sourcesystem' --> delete the record.
With rgds,
Anil Kumar Sharma .P

Error while extracting data from ODS using Infospokes - URGENT

Hi all,
I am extracting data from an ODS using infospokes and nothing fancy, no selection criteria but I am getting an error message saying
Syntax error in row3(-> long text) Msg id = "RG" and msgno is 102
Any ideas on how I can see what is the exact error and how to debug this?
thanks
Sabrina.

Hi Sabrina
service.sap.com can help you getting the details of your mesg.
I found one OSS note suitable to your mesg. So just check out OSS note # 671097. I hope this note will be some help to you. If not go and chk in the OSS you can find some more.
Here is the note details also
<i>Symptom
Error message RG102: 'Syntax error in &1, row &2 (-> long text)' appears in the request log of an InfoSpoke.
Reason and Prerequisites
The data source is an ODS object and the extraction mode is 'delta'. The cause of the error message is that the ODS extractor is unable to select the request ID (InfoObject 0REQUID) from the change log of the ODS object. However, the request ID is mistakenly provided in the field list of the ODS object on the InfoSpoke maintenance screen. --
Solution
Delete the 0REQUID InfoObject from the field list of the InfoSpoke and activate the InfoSpoke. As of the patch mentioned below, the request ID in the template tab is no longer provided.
BW 3.0B
Import Support Package 16 for 3.0B (BW3.0B Patch 17 or SAPKW30B16) into your BW system. The Support Package will be available once note 571699 with the short text "SAPBWNews BW 3.0B Support Package 16", which describes this Support Package in more detail, has been released for customers.
BW 3.1 Content
Import Support Package 10 for 3.1 Content (BW3.10 Patch 11 or SAPKW31010) into your BW system. The Support Package will be available once note 571747 with the short text "SAPBWNews BW 3.1 Content Support Package 10" has been released for customers.
To provide information in advance, the notes mentioned above may already be available before the Support Package is released. In this case, however, the short text still contains the words "preliminary version".
Refer to note 110934, which contains information about BW Support Packages.</i>
Regards,
Rohini

Error come while extracting data using DB Connect

Hi Exports!!!
We are not getting data in data target while fetching data from DB Conenct Exptraction method
We have created Source systme for DB Conenct . We are able to see data if we right click and select /EDIT database and display database content.
We can see error in Monitor::
[[No IDocs created; Database system
Diagnosis
No IDocs were created. The IDocs are created in BW with database systems as source systems. Since no IDocs were created, a short dump in BW probably occurred.
System response
Procedure
Check the short dumps in BW.]]
Please suggest !!!

Hi,
so your connection is fine, in RSDBC you can see data, right? You generated your DataSource and then assigned source system DS to ISource.
What is your External DB system? If it is MSSQL then do NOT use the user sa for the connection. Create a "BWUser" in your MSSQL with all adequate rights.
Then create a view with this user.
CREATE VIEW BWUser.MYVIEW AS SELECT * FROM dbo.TABLE.
Generate you DSource on BWUser.MYVIEW instead of on a dbo.* object.
This should work it out.
Also remind that you fields names have to cope with the DCOnnect restrictions (upper case, no / only alphanumeric chars)
Note that there is no IDOC transfer between both systems thus the error msg is just because the source didn't not bring any data to BW; the msg is misleading you...
let me know
hope this helps...
Olivier.
Message was edited by:
Olivier Cora

Java Character set error while loding data using iSetup

Hi,
I am getting the following error while migrating settup data from R12 (12.1.2) Instance to another R12 (12.1.2) Instance, Both the Database has same DB character set (AL32UTF8)
we are getting this error while migrating any setup data
Actual error is
Downloading the extract from central instance
Successfully copied the Extract
Time taken to download Extract and write as zip file = 0 seconds
Validating Primary Extract...
Source Java Charset: AL32UTF8
Target Java Charset: UTF-8
Target Java Charset does not match with Source Java Charset
java.lang.Exception: Target Java Charset does not match with Source Java Charset
     at oracle.apps.az.r12.common.cpserver.PreValidator.validate(PreValidator.java:191)
     at oracle.apps.az.r12.loader.cpserver.APILoader.callAPIs(APILoader.java:119)
     at oracle.apps.az.r12.loader.cpserver.LoaderContextImpl.load(LoaderContextImpl.java:66)
     at oracle.apps.az.r12.loader.cpserver.LoaderCp.runProgram(LoaderCp.java:65)
     at oracle.apps.fnd.cp.request.Run.main(Run.java:157)
Error while loading apis
java.lang.NullPointerException
     at oracle.apps.az.r12.loader.cpserver.APILoader.callAPIs(APILoader.java:158)
     at oracle.apps.az.r12.loader.cpserver.LoaderContextImpl.load(LoaderContextImpl.java:66)
     at oracle.apps.az.r12.loader.cpserver.LoaderCp.runProgram(LoaderCp.java:65)
     at oracle.apps.fnd.cp.request.Run.main(Run.java:157)
Please help in identifying and resolving the issue
Sachin

The Source and Target DB character set is same
Output from the query
------------- Source --------------
SQL> select value from nls_database_parameters where parameter='NLS_CHARACTERSET';
VALUE
AL32UTF8
And target Instance
-------------- Target----------------------
SQL> select value from nls_database_parameters where parameter='NLS_CHARACTERSET';
VALUE
AL32UTF8
The Error is about Source and Target JAVA Character set
I will check the Prevalidator xml from How to use iSetup and update the note
Thanks
Sachin

Error while Extracting data using RSCRM_BAPI

Similar Messages

Maybe you are looking for