Error while implementing a web service in web dynpro application
HI All,
I am trying to use a webservice in a web dynpro application.
Web service description:- This is a very simple application which takes two String inputs and when submitted displays the string in the concatenated form.
Web dynpro:- I used this web service in the web dynpro as an adaptive web service model.
The Layout design consists of two input fields which are mapped to the request fields
ex : - Request_Add.Add.S1 and Request_Add.Add.S2
A text area to display the response:- Request_Add.Response.AddResponse.Response
And a button which invokes the execute method
public void onActionWebserviceCall(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
//@@begin onActionWebserviceCall(ServerEvent)
wdThis.wdGetWebserviceCompController().executeRequest_Add();
//@@end
When I am trying to run the application I am getting error:-
Exception on execution of web service with WSDL URL 'http://<Host>:<Port>/EjbWebservice/Config1?wsdl' with operation 'add' in interface 'EjbWebserviceVi_Document'
Kindly reply.
Thanks
Neha
Hi,
Yes I have tested the web service in Navigator . The WSDL is also properly generated.
I have not publish the web service in UDDI but as per my understanding this is not necessary. please correct me if I am wrong.
Thanks
Neha
Similar Messages
-
Unable to consume secured Web service from a Dynpro application
Hello,
I have followed <a href="http://help.sap.com/saphelp_nw04/helpdata/en/c3/bac36a469e4c75aba646077e71516d/frameset.htm">this tutorial</a>
in order to protect and consume a secured Web service from a Dynpro application using SAP logon ticket.
The problem is that after implementing everything needed I receive 401 Unauthorized when I am trying to consume it from the web dynpro side.
If I manually transfer the request the credentials, before the execute i.e:
modObj._setUser
modObj._setPassword
modObj.execute();
I am able to call it, meaning the dynpro application doesn't transfer these credentials to the Webservice even though it's authentication property is set to true.
Any idea how to solve it?
Roy
Message was edited by:
Roy CohenTry below steps
Add jars
o security.class
o tc/sec/destinations/interface
Setting WebDynpro project property
o Project>Properties>Web Dynpro References-->Interface references
 Name=tcsecdestinations~interface
o Project>Properties>Web Dynpro References-->Service reference
 Name=webservices
 Name=tcsecdestinations~service
Dynamically Set httpdestination and Call web service
final InitialContext ctx = new InitialContext();
final DestinationService dstService = (DestinationService)ctx.lookup(DestinationService.JNDI_KEY);
if (dstService== null)
throw new NamingException ("Destination service not available");
final Destination destination = dstService.getDestination("HTTP"," DestinationName");
// getting user name
Properties destprop = destination.getDestinationProperties();
String username = destprop.getProperty("USERNAME");
String password = destprop.getProperty("PASSWORD");
final HTTPDestination httpDestination = (HTTPDestination) destination;
HttpURLConnection httpConnection = httpDestination.getURLConnection();
String httpURL = String.valueOf(httpConnection.getURL());
Request_AdvLocationVer1ViDocument_getLocation obj=wdContext.currentRequest_AdvLocationVer1ViDocument_getLocationElement().modelObject();
obj._setUser( user );
obj._setPassword(pass);
obj._setEndPoint(httpURL);
obj.execute();
Rahul -
Error while invoking a WS-Security secured web service from Oracle BPEL..
Hi ,
We are facing some error while invoking a WS-Security secured web service from our BPEL Process on the windows platform(SOA 10.1.3.3.0).
For the BPEL process we are following the same steps as given in an AMIS blog : - [http://technology.amis.nl/blog/1607/how-to-call-a-ws-security-secured-web-service-from-oracle-bpel]
but sttill,after deploying it and passing values in it,we are getting the following error on the console :-
“Header [http://schemas.xmlsoap.org/ws/2004/08/addressing:Action] for ultimate recipient is required but not present in the message”
Any pointers in this regard will be highly appreciated.
Thanks,
SaurabhHi James,
Thanks for the quick reply.
We've tried to call that web service from an HTML designed in Visual Studios with the same username and password and its working fine.
But on the BPEL console, we are getting the error as mentioned.
Also if you can tell me how to set the user name and password in the header of the parter link.I could not find how to do it.
Thanks,
Saurabh -
Error while calling a web service in web dynpro through XI
Hello,
I was following a blog for Invoking Webservices using SAP XI
/people/siva.maranani/blog/2005/09/03/invoke-webservices-using-sapxi
I have done all the steps specified but when I import the wsdl file in web dynpro application and deploy the project I get the following error:
<b>"Exception on execution of web service with WSDL URL 'bankws_OUT_MI.wsdl' with operation 'bankws_OUT_MI' in interface 'bankws_OUT_MI'"</b>
where:
bankws_OUT_MI -
is the message interface name.
I have defined a web service in the integration reopsitory as follows:
<b>http://PEP:50000/XISOAPAdapter/MessageServlet?channel=:bankws:s_comm</b>
where
bankws --- service name
s_comm -
sender communication channel
selected 'bankws_OUT_MI' message interface from the given choices
'bankws_IN_MI' or 'bankws_OUT_MI'.
interface name: bankws_OUT_MI -
mesage interface name
Can anyone guide me how to proceed further. Also if possible can anyone send me some helpful documentation regarding how to call a web service in web dynpro through XI.
Thanks in advance.
Regards,
Imtoolhello everyone,
I made the whole scenario again and it is running succusfully in Xml spy. Now when i call the webservice in web dynpro... I get the following error:
<b>com.sap.engine.services.webservices.espbase.discovery.BaseIOException: Invalid Response Code 200 while accessing URL: http://PEP:50000/XISOAPAdapter/MessageServlet?channel=:OOMS_WS_OUT:CC_OOMS_WS_OUT. Response Message: OK. Content Type: text/html; charset=utf8. Body Content: <html> <head><title>MessageServlet</title></head> <body> <h3>Message Servlet is in Status OK</h3> <h3>Status information:</h3> Servlet com.sap.aii.af.mp.soap.web.MessageServlet (Version $Id: //tc/xi/645_VAL_REL/src/_adapters/_soap/java/com/sap/aii/af/mp/soap/web/MessageServlet.java#7 $) bound to /MessageServlet <br/>Classname ModuleProcessor: null <br/>Lookupname for localModuleProcessorLookupName: localejbs/ModuleProcessorBean <br/>Lookupname for remoteModuleProcessorLookupName: null <br/>ModuleProcessorClass not instantiated <br/>ModuleProcessorLocal is Instance of com.sap.aii.af.mp.processor.ModuleProcessorLocalLocalObjectImpl0 <br/>ModuleProcessorRemote not instantiated </body></html></b>
I have also made the entry in the visual administrator for metadata_dest and execution_dest.
Does anybody have an idea what mistake i am doing.
Thanks,
Imtool -
Error in testin sender synchronous web service using web service navigator
Hi
sorry my connection got disconnected ..
I am testing my web service through web service navigator in PI 7.1
then when i click on import test data tab and select my wsdl and click on "go" button . i get the error
"XML Deserialization Error. XML is not valid. Node <documentation> child of <null> not described in Schema."
pls help
ninad
Edited by: Ninad Sane on May 26, 2009 3:50 PMHi Ninad,
While importing wsdl, select category as "WSDL", you are trying to import it as XSD.
Hope this will help.
Thanks,
Nilesh -
Hi,
I am getting an error while uploading an excel file in web Dynpro application. i am using the HR_KR_XSTRING_TO_STRING this function. I am getting the following error message 'Unable to interpret as a number'.First of all, are you sure you know what you are working with here. If this is standard Excel file in the Microsoft binary/propriatery format there is not function module or class in ABAP that can magically just transform this to a character string. You should search the forums as this has been discussed extensively. On that topic, please also do not post duplicate threads. I have already locked your other thread with the same basic question.
Instead of the binary/propriatery format of Excel, the file should be saved on the client as a text based format - like XML or Text Tab Delimited. You can then use several different options on the server to convert the XSTRING to STRING and process the content (becuase it was text based to begin with). You could use CL_BCS_CONVERT, the function modules in the function group SCMS_CONV, or the class CL_ABAP_CONV_IN_CE. -
RWI 00200 Error while scheduling the Bex Query based Webi report
Dear All,
I am facing the below error while scheduling the Bex Query based Webi report.
Error:RWI 00200
We are using BO XI 4.0 Sp05.
Please adviseHi,
I am on BO 4.0 SP05 Patch 6. Webi reports are just showing processing but not giving results. When I try to create new report it is throwing java security error.
Tried applet patch upgrade(From link : https://websmp207.sap-ag.de/~sapidb/011000358700000902752013E) for webi certificate but didn't help.
Please suggest what could be done.
Thanks and Regards,
Ankit Sharma -
Error when generating Web Services Proxy for SCA Application Module
Hello,
I'm trying to create Web Services for a simple Application Module with JDeveloper 11g (11.1.1.3.0).
I start a new ADF Project, I create an Application Module as simple as possible : it contains only a simple View Object on the DEPT Entity.
On my Application Module, I choose "Service Interface" and I add my View Object in the service interface.
I test my Web Service in the Embedded Weblogic Server, it works well. (I succeed in using the Get operation, for example).
But when I try to generate a Web Service proxy (right-click on the WSDL File -> Generate Web Service Proxy), It always fail with such errors :
oracle.jdeveloper.webservices.tools.WsdlValidationException: Error creating model from wsdl "file:/C:/JDeveloper/mywork/ApplicationAppelServiceSCA/Model/src/model/common/AppModuleService.wsdl": 'unset' is already defined'Bytes' is already defined'ref' is already defined'Duration' is already defined'Types' is already defined'Character' is already defined'type' is already defined'Day' is already defined'nestedInterfaces' is already defined'Date' is already defined'datagraph' is already defined'Type' is already defined'Integer' is already defined'ModelsType' is already defined'ChangeSummaryType' is already defined'instanceClass' is already defined'Month' is already defined'DataObject' is already defined'javaClass' is already defined'LongObject' is already defined'DateTime' is already defined'dataObject' is already defined'YearMonth' is already defined'ShortObject' is already defined'Long' is already defined'types' is already defined'JavaInfo' is already defined'IntObject' is already defined'Boolean' is already defined'DoubleObject' is already defi...
Can someone help me to understand this error ?
i never manually edited the WSDL File, so I don't understand why the generated WSDL or XSD files might contain errors.
Thanks for your Help,
LaurentWe have the same problem, and the problem was in the xsd import:
The wdsl import a schema that import other schema, the second import use a relative path, that was wrong.
So check the xsd import sequence.... -
Error when querying REST web services from web-based InfoPath form 2013 environment
Error when querying REST web services from web-based InfoPath form 2013 environment, we are trying to consume REST web service in InfoPath form ( SharePoint 2013 version)
http://spapp/sites/litigation/Intake/_api/web/lists/getbytitle('Email%20Profiles')/items(1)
it works in preview but does not when it is published. because of claim based authentication i m getting below error
The form cannot run specified query, the underlying connection was closed. An expected error occurred
same works in 2010 environment .. are we missing anything in 2013 servers?? please let me know how we can resolve it.. thank you
gurueveryone face this issue, nothing in event viewer, its easy to reproduce error at ur end also..
just you need to use below web service in infopath and populate some data on form load like id = 1 pull the title and try to set in form any field...the
list has one item thats all
guru -
Basic auth with RESTful WEb service and Web Service reference
Hi, All,
We have made much progress on getting an application working wtih RESTful web services but now are trying to figure out how to lock down a RESTful Web service while making it available for a particular application.
We are using one of the sample 'emp' table web services that come with Apex 4.2 and are trying to apply Basic Auth to the WEb Service via Weblogic filter defined in the web.xml file. That works fine. I now get challenged when I try to go to :
https://wlogic.edu/apex/bnr/ace/hr/empinfo/
And when I authenticate to that challenge I am able to get the data. (we are usiing LDAP authentication at the Weblogic level)
However, I am not sure how to get same basic authentication to work with the Web Service reference in my application. I see the error message in the application when I try to call that Web Service:
401--Unauthorized<
And I see:
"The request requires user authentication. The response MUST include a WWW-Authenticate header field (section 14.46) containing a challenge applicable to the requested resource. The client MAY repeat the request with a suitable Authorization header field (section 14.8). If the request already included Authorization credentials"
How do I provide the credentials in the Web REference or do I provide credentials in the Application?
Web service works fine if I remove the RESTful web service basic auth from the Web.xml file.
Should we NOT use Weblogic basic auth and instead use basic auth from Workspace RESTful web service definition. If so, how do we implement THAT basic auth in the Web Service definition and in the Web SErvice Reference on the application?
Thanks,
PatWhat I mean is diid you try to use the PL/SQL package for APEX webservice. Here is an example I use (modified and shortened, just to show how much better this is than to use it from the application).
CREATE OR REPLACE PACKAGE webservice_pkg
IS
PROCEDURE create_webservice (
p_id IN NUMBER,
p_message OUT VARCHAR2,
p_workspace IN VARCHAR2 DEFAULT 'MY_WORKSPACE',
p_app_id IN NUMBER DEFAULT v ('APP_ID'),
p_app_session IN VARCHAR2 DEFAULT v ('SESSION'),
p_app_user IN VARCHAR2 DEFAULT v ('APP_USER')
END webservice_pkg;
CREATE OR REPLACE PACKAGE BODY webservice_pkg
IS
PROCEDURE set_credentials (
p_workspace IN VARCHAR2,
p_app_id IN NUMBER,
p_app_session IN VARCHAR2,
p_app_user IN VARCHAR2
IS
v_workspace_id NUMBER;
BEGIN
SELECT workspace_id
INTO v_workspace_id
FROM apex_workspaces
WHERE workspace = p_workspace;
apex_util.set_security_group_id (v_workspace_id);
apex_application.g_flow_id := p_app_id;
apex_application.g_instance := p_app_session;
apex_application.g_user := p_app_user;
END set_credentials;
PROCEDURE create_webservice (
p_id IN NUMBER,
p_message OUT VARCHAR2,
p_workspace IN VARCHAR2 DEFAULT 'MY_WORKSPACE',
p_app_id IN NUMBER DEFAULT v ('APP_ID'),
p_app_session IN VARCHAR2 DEFAULT v ('SESSION'),
p_app_user IN VARCHAR2 DEFAULT v ('APP_USER')
IS
v_envelope VARCHAR2 (32000);
v_server VARCHAR2 (400);
v_url VARCHAR2 (4000);
v_result_url VARCHAR2 (1000);
v_collection_name VARCHAR2 (40) := 'PDF_CARD';
v_message VARCHAR2 (4000);
v_xmltype001 XMLTYPE;
BEGIN
v_url := v_server || '.myserver.net/services/VisitCardCreator?wsdl';
FOR c IN (SELECT *
FROM DUAL)
LOOP
v_envelope :=
'<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" '
|| 'xmlns:bran="http://www.myaddress.com">'
|| CHR (10)
|| '<soapenv:Header/><soapenv:Body>'
|| CHR (10)
|| '<parameter:'
|| 'some_value'
|| '>'
|| CHR (10)
|| '<bran:templateID>'
|| p_id
|| '</bran:templateID>'
|| '</soapenv:Body>'
|| CHR (10)
|| '</soapenv:Envelope>';
END LOOP;
set_credentials (p_workspace, p_app_id, p_app_session, p_app_user);
BEGIN
apex_web_service.make_request
(p_url => v_url,
p_collection_name => v_collection_name,
p_envelope => v_envelope
p_message := 'Some message.';
EXCEPTION
WHEN OTHERS
THEN
v_message :=
v_message
|| '</br>'
|| 'Error running Webservice Request. '
|| SQLERRM;
END;
BEGIN
SELECT v_result_url
|| EXTRACTVALUE (VALUE (t),
'/*/' || 'Return',
'xmlns="http://www.myaddress.com"'
xmltype001
INTO v_result_url,
v_xmltype001
FROM wwv_flow_collections c,
TABLE
(XMLSEQUENCE (EXTRACT (c.xmltype001,
'//' || 'Response',
'xmlns="http://www.myaddress.com"'
) t
WHERE c.collection_name = v_collection_name;
EXCEPTION
WHEN OTHERS
THEN
v_message := v_message || '</br>' || 'Error reading Collection.';
END;
EXCEPTION
WHEN OTHERS
THEN
p_message := v_message || '</br>' || SQLERRM;
END create_webservice;
END webservice_pkg;
/If you use it this way, you will find out what the problem is much faster.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.apress.com/9781430235125
http://apex.oracle.com/pls/apex/f?p=31517:1
http://www.amazon.de/Oracle-APEX-XE-Praxis/dp/3826655494
------------------------------------------------------------------- -
Error while running the initialize service to create a new application
Hi,
I tried running the initialze service,when I encountered this error.Can anyone help me whith this.
Setting EAC provisioning and performing initial setup...
[03.20.13 23:32:37] INFO: Checking definition from AppConfig.xml against existing EAC provisioning.
[03.20.13 23:32:38] INFO: Setting definition for application 'Endeca'.
[03.20.13 23:32:38] INFO: Setting definition for host 'AuthoringMDEXHost'.
[03.20.13 23:32:39] INFO: Setting definition for host 'LiveMDEXHostA'.
[03.20.13 23:32:39] INFO: Setting definition for host 'ReportGenerationHost'.
[03.20.13 23:32:39] INFO: Setting definition for host 'WorkbenchHost'.
[03.20.13 23:32:39] INFO: Setting definition for host 'ITLHost'.
[03.20.13 23:32:40] INFO: Setting definition for component 'AuthoringDgraph'.
[03.20.13 23:32:40] INFO: [AuthoringMDEXHost] Starting shell utility 'mkpath_dgidx-output'.
[03.20.13 23:32:41] INFO: [AuthoringMDEXHost] Starting shell utility 'mkpath_forge-output'.
[03.20.13 23:32:42] INFO: [AuthoringMDEXHost] Starting shell utility 'mkpath_cumulative-partials'.
[03.20.13 23:32:44] INFO: [AuthoringMDEXHost] Starting shell utility 'mkpath_dgraph-config'.
[03.20.13 23:32:45] INFO: [AuthoringMDEXHost] Starting shell utility 'mkpath_local-dgraph-input'.
[03.20.13 23:32:46] INFO: [AuthoringMDEXHost] Starting shell utility 'mkpath_local-cumulative-partials'.
[03.20.13 23:32:48] INFO: [AuthoringMDEXHost] Starting shell utility 'mkpath_local-dgraph-config'.
[03.20.13 23:32:49] INFO: Setting definition for component 'DgraphA1'.
[03.20.13 23:32:50] INFO: Setting definition for script 'PromoteAuthoringToLive'.
[03.20.13 23:32:50] INFO: Setting definition for custom component 'WorkbenchManager'.
[03.20.13 23:32:51] INFO: Updating provisioning for host 'ITLHost'.
[03.20.13 23:32:51] INFO: Updating definition for host 'ITLHost'.
[03.20.13 23:32:51] INFO: [ITLHost] Starting shell utility 'mkpath_temp'.
[03.20.13 23:32:53] INFO: Setting definition for custom component 'IFCR'.
[03.20.13 23:32:53] INFO: Updating provisioning for host 'ITLHost'.
[03.20.13 23:32:53] INFO: Updating definition for host 'ITLHost'.
[03.20.13 23:32:54] INFO: Setting definition for component 'LogServer'.
[03.20.13 23:32:54] INFO: [ReportGenerationHost] Starting shell utility 'mkpath_input'.
[03.20.13 23:32:56] INFO: Setting definition for script 'DaySoFarReports'.
[03.20.13 23:32:56] INFO: Setting definition for script 'DailyReports'.
[03.20.13 23:32:56] INFO: Setting definition for script 'WeeklyReports'.
[03.20.13 23:32:57] INFO: Setting definition for script 'DaySoFarHtmlReports'.
[03.20.13 23:32:57] INFO: Setting definition for script 'DailyHtmlReports'.
[03.20.13 23:32:57] INFO: Setting definition for script 'WeeklyHtmlReports'.
[03.20.13 23:32:57] INFO: Setting definition for component 'WeeklyReportGenerator'.
[03.20.13 23:32:58] INFO: Setting definition for component 'DailyReportGenerator'.
[03.20.13 23:32:58] INFO: Setting definition for component 'DaySoFarReportGenerator'.
[03.20.13 23:32:59] INFO: Setting definition for component 'WeeklyHtmlReportGenerator'.
[03.20.13 23:32:59] INFO: Setting definition for component 'DailyHtmlReportGenerator'.
[03.20.13 23:33:00] INFO: Setting definition for component 'DaySoFarHtmlReportGenerator'.
[03.20.13 23:33:00] INFO: Setting definition for script 'BaselineUpdate'.
[03.20.13 23:33:00] INFO: Setting definition for script 'PartialUpdate'.
[03.20.13 23:33:01] INFO: Setting definition for component 'Forge'.
[03.20.13 23:33:01] INFO: [ITLHost] Starting shell utility 'mkpath_incoming'.
[03.20.13 23:33:03] INFO: Setting definition for component 'PartialForge'.
[03.20.13 23:33:03] INFO: [ITLHost] Starting shell utility 'mkpath_incoming'.
[03.20.13 23:33:05] INFO: Setting definition for component 'Dgidx'.
[03.20.13 23:33:05] INFO: Definition updated.
[03.20.13 23:33:05] INFO: Provisioning site from prototype...
[03.20.13 23:33:06] SEVERE: null
Occurred while executing line 3 of valid BeanShell script:
1|
2|
3| IFCR.provisionSite();
4| WorkbenchManager.updateWsConfig();
5|
6|
[03.20.13 23:33:06] SEVERE: Caught an exception while invoking method 'run' on object 'InitialSetup'. Releasing locks.
Caused by java.lang.reflect.InvocationTargetException
sun.reflect.NativeMethodAccessorImpl invoke0 - null
Caused by com.endeca.soleng.eac.toolkit.exception.AppControlException
com.endeca.soleng.eac.toolkit.script.Script runBeanShellScript - Error executing valid BeanShell script.
Caused by java.lang.NullPointerException
com.endeca.soleng.eac.toolkit.utility.IFCRUtility extractIfcrErrorMessage - null
regards,
RahulHi Ritwik,
I got this error while running the initialze service . I checked the Dgidx log but there was no log generated as I'm still running the initialize service.
I even checked the workbench port and hostname.Every thing looks fine.
but im not able to login or see the workbench login web page whn i try to access it with the hostname:portnumber .
Regards,
Rahul -
SocketTimeoutException when calling a web service from a WD application
I'm trying to call a method of a web service from my WD application. The execution of the method longs more than 60 sec, so I'm always getting:
Service call exception; nested exception is: java.net.SocketTimeoutException: Read timed out
I've got this post, which tells to change the property "socketTimeout" of the client.
Read Timed Out Error
But I don't know what is the client in my WD application, does this refer to the logical port ?
I've tried inserting this into wdInit:
com.hesa.hesanet3.h3wsmodel.proxies.Hesanet3Impl service = com.hesa.hesanet3.h3wsmodel.H3WSModel.getServiceImpl();
logicalPort =(com.hesa.hesanet3.h3wsmodel.proxies.Hesanet3ViDocument) service.getLogicalPort("Config1Port_Document", com.hesa.hesanet3.h3wsmodel.proxies.Hesanet3ViDocument.class);
logicalPort._setProperty("socketTimeout", "30000");
But it doesn't work.
I've tried getting the logical port from the model object corresponding to the method of the webservice unsuccesfully.
I've tried with Visual Administrator -> instance -> Web Service Container -> Settings -> WS Clients Socket Timeout, increasing to 120 secs. No result, still stop at 60s.
I've tried with Visual Admin -> global configuration -> Http provider -> KeepAliveTimeout, increasing to 120 secs, and still stop at 60s.
I can't change model object code, but I've tried to debug it and setting the property in stubForLogicalPort and in _getGlobalFeatureConfig(), without change.
I'm using a HTTP Destination, does this have something to do?
I'm getting insane with this and I'm in urgent need of help.
How can I change the time the WD waits for the WebService to answer ?
Thanks in advance.Find solution. Check this thread:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/wdjava/faq%2b-%2bmodels%2b-%2badaptive%2bweb%2bservice
The com.sap.tc.webdynpro.model.webservice.api.IWDWSInvocationModifier interface can be implemented by an application using the Adaptive Web Service model in order to modify the web service invocation object just before it's execution. Invocation modifiers need to be registered with the executable model class for which invocation is to be modified:
Request_NumberToWords requestMO = new Request_NumberToWords(model);
requestMO.wdSetInvocationModifier(
new IWDWSInvocationModifier() {
public void doModifyInvocation(Object port) {
HTTPControlInterface httpItf = HTTPControlFactory.getInterface(port);
//timeout for this WS invocation is 120 sec; don't use global config. setting of WS-Runtime
httpItf.setSocketTimeout(120000);
public void doModifyAfterInvocation() {}
Best regards. -
Consuming External Web Services in Web Dynpro Java
Hi All,
I an trying to consume external web service in Web dynpro java using Adaptive Web Service Model.
But getting below mentioned error while executing the web service
Exception on execution of web service with WSDL URL 'D:\Web Service Project\CurrencyConvertor.asmx.xml' with operation 'ConversionRate' in interface 'CurrencyConvertorSoap'
Steps i followed are as below:
1. Created Adaptive Web Service Model for this i select WSDL source as "Local File System or URL"
In next step i select No logical destination radio button and click on next
In next step, browse the WSDL file and successfully import the WSDL file.
2. After successfully importing the WSDL file i wrote below code in Init method:
WebModel modelweb = new WebModel();
Request_ConversionRate reqConversion = new Request_ConversionRate(modelweb);
ConversionRate conversion= new ConversionRate(modelweb);
reqConversion.setConversionRate(conversion);
wdContext.nodeRequest_ConversionRate().bind(reqConversion);
3.After that execute the model - code is given below :
IWDMessageManager manager = wdComponentAPI.getMessageManager();
try
wdContext.currentRequest_ConversionRateElement().modelObject().execute();
wdContext.nodeResponse().invalidate();
wdContext.nodeConversionRateResponse().invalidate();
catch(Exception e)
manager.reportException(e.getMessage(), false);
Please let me know how to resolve this.
Thanks
SandyHi,
You need to use destinations for metadata and modeldata.
Configure those destination in Visula admin.
you can refer to following link.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b2bc0932-0d01-0010-6d8e-cff1b2f22bc7
Regards,
Shruti. -
Consume XI web service in web dynpro application
HI All,
I have scenario access web service in web dynpro java, which is created by XI ..Now I have WSDL file. Using that WSDL file I have imported web service model(Adaptive web service method) in my web dynpro java.
By following the PDF document = https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b2bc0932-0d01-0010-6d8e-cff1b2f22bc7
I have created a Model as mentioned in the PDF.
Once model is created I have done the mapping from model to component controller, after that I need to execute the Web service model .For the execution I need to write a code in component controller :-
model class name = XIModel
XIModel obj = new XIModel();
Once I am done with the above coding , and when I try to run the application I get the following error :-
com.sap.engine.services.webservices.espbase.discovery.BaseIOException: Invalid Response Code 200 while accessing URL:http://atind037:50000/WSDL/GetPOPDF.wsdl. Response Message: OK. Content Type: content/unknown
Could you please help me with this at the earliest , as it is a urgent issue.
Regards,
Boopathi M.Hi boopathi,
It seems your wsdl url is not correct. Put the http://atind037:50000/WSDL/GetPOPDF.wsdl
in your browser and check whether you are getting the WSDLDefinitions in xml format or not ?
In wsdl url put ? instead of .
URL : http://atind037:50000/WSDL/GetPOPDF?wsdl
call adaptive web services mit Parameter
Regards,
Mithu -
Invoking a Web Service from a mobile application
Hi all,
I have installed Sun Wireless Toolkit 2.5.2 for CDLC and MTJ.
I want to invoke a web service from an MTJ Application and I have not a clue of how to start.
First let me say I am working with RSA (which is over Eclipse)
My first attempt was creating the web service client and then try to convert it into a mobile application (through the use of MTJ --> Convert to Midlet Project)
I found 4 errors when doing so:
First was solved changing the jre to 1.6.
I am still dealing with the following three:
* Error preverifying class mipaquete.MiServicioService
java/lang/NoClassDefFoundError: javax/xml/ws/Service
* Error preverifying class mipaquete.ObjectFactory
VERIFIER ERROR mipaquete/ObjectFactory.createMiOperacion(Lmipaquete/MiOperacion;)Ljavax/xml/bind/JAXBElement;:
Illegal type in constant pool
* Type mipaquete.MiServicioPortProxy$Descriptor Error preverifying class mipaquete.MiServicioPortProxy$Descriptor
VERIFIER ERROR mipaquete/MiServicioPortProxy$Descriptor.getDispatch()Ljavax/xml/ws/Dispatch;:
Illegal type in constant pool
I only started to solve the first one. I assumed that I have to add the right .jar to manifest file (please let me know if I am wrong). I tried to do by adding the textual classpath rt.jar, however I am not able to give it the right path:
C:\Archivos de programa\IBM\SDP\runtimes\base_v7_stub\java\jre\lib\rt.jar (even though I split the too long sentence into two and I include an space at the beginning of the second, I still get an error when saving)
I would appreciate any help
A) to solve the existing problems
or
B) To create a web service client in an EclipseME application through any other method.
Thank-you very much in advance,
Guadalupe
PS Any clue is welcomed!!Hello rss,
If you want to invoke a web service from a JCD you will have to build the SOAP message using JAX-RPC or AXIS and then programmatically creat an HTTP connection.
Or you can leverage the HTTP(S) eWay and then you only have to build the SOAP message.
Or use eInsight. You can import a WSDL into eInsight and eInsight will offer you a business process Activity to invoke the web service operations defined in the WSDL. -
Consume Web Service in Web Dynpro
Hi Experts,
I´m currently trying to learn web dynpro development.
Scenario: I have one component which embed two views. One view is for enter customer number and in the other view I will see the name of the customer. The name of this customer is provided in a sap erp2005. I have develop a function modul and wich gave me the appropriate data(customer name). Then I create a web service base on this function module.
When I test this web serviec in WSNavigator, I get the customer name, so the web service is working well.
My Problem is: I can´t invoke this Web Service in Web Dynpro. My steps to invoke web service were: create a model with the web service wsdl and then I add this model in the component (in "Used Models").
I have create a application and assign it to the component. When I "Deploy new archive and Run" the application I be come the error: "Configuration not found for application: demo.sap.com/test_wd3,serviceRefId:7fecf23b-0895-48f3-9902-0e7015a705c3. Please check the configuration details from the NWA. You may have not assigned the Service Group to a Provider System, or the generation of the configuration has failed."
What do I have to consider or to set up?
It is right to assign the input field to the context parameter?
PS: I have followed the steps in this tutorial, but I don´t use XI or PI
http://www.riyaz.net/blog/xipi-consuming-xi-web-services-using-web-dynpro-part-ii/technology/sap/7/
best regards
Anna von Landsberg
Edited by: Anna_von_Landsberg on Dec 8, 2010 4:48 PMHi,
I have the following message error:
Exception on execution of web service with WSDL URL
'http://j2eeserver:port/xxxx/Config1?wsdl'
with operation 'RequestNode' in interface
'urn:xxxxx'
When i debugged it, I found the following error:
Cannot find the required parameter [unTipoProducto] in request message content.
What is wrong?, I pasted the code of my method, that call to web service in the component controller.
public void Alta_Entrega( )
//@@begin Alta_Entrega()
String tipoProducto = wdContext.currentAlta_EntregaElement().getUnTipoProducto();
Request_Alta_Entrega entregaMO = wdContext.currentRequest_Alta_EntregaElement().modelObject();
if (!wdContext.currentAlta_EntregaElement().getUnTipoProducto().equalsIgnoreCase("")){
IWDMessageManager manager = wdComponentAPI.getMessageManager();
if (logger.beDebug()) {
entregaMO.wdSetInvocationLogEnabled(true); //switch on logging for this model object
try{
entregaMO.setInvokerProperty(Stub.USERNAME_PROPERTY,"xxx");
entregaMO.setInvokerProperty(Stub.PASSWORD_PROPERTY,"xxx");
entregaMO.execute();
wdContext.nodeResponse().invalidate();
wdContext.nodeAlta_Entrega().invalidate();
}catch (Exception e){
manager.reportException(e.getMessage(),false);
logger.debugT(entregaMO.wdGetRequestLog()); //request log (HTTP header + SOAP request)
logger.debugT(entregaMO.wdGetResponseLog()); //response log (HTTP header + SOAP response)
logger.debugT(entregaMO.associatedModelClassInfo().getModelInfo().toString()); //model metadata in XML format
logger.debugT(entregaMO.toString()); //model object tree in XML format (= model context node content)
I hope you can understand me, because my english is very bad!!.
Thank you.
Maybe you are looking for
-
Blend will not stay closed, keeps opening itself
I don't use BB Blend at all, and in device manager I close it than hours later i see that it has opened itself up again and I have to close it so it does not suck up resources. Why is it that it opens itself and is there a way to delete it?
-
Sync not syncing playlists correctly
New user. Ran into considerable problems syncing with itunes before discovering the ipad doesn't support playlist folders so I created new playlists not in folders and tried syncing them over usb. itunes shows it has synced everything, but from the
-
hello- I just got a G5 with OSX tiger...I am running CS2...i have installed 2 scanners, an Epson 4990 and a Nikon Coolscan 5000...they both work by themselves but I want to use them in Photoshop via the 'import "command...however when I go to file>im
-
Dear all, When we maintain entry in TCURR table using OB08, for indirect ratio, in table TCURR entry should be disply by prefix "/". But here it is showing as "-". Can anyone please help me ? Regards, Nidhi
-
Internet Sales Development and Modifications
Hi, I was reading the Internet Sales Development and Extension guide and it was mentioned that SAP does not release Java source codes for ISA. Has anyone any experience in modifying ISA and how much can be made without source code ? A prospective cli